Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees

Section 1 Grooved Mechanical ouplings, Flange dapters & Mechanical Tees Grooved Mechanical ouplings... 1 Rigid & Flexible ouplings... 13 M-7 Installation-Ready Rigid oupling... 14 K-9 & Z05 Rigid oupling... 15 Z07 Heavy Duty Rigid oupling... 16 XH-1000 Extra Heavy Rigid oupling... 17 7705 Flexible oupling... 18 7707 Heavy Duty Flexible oupling... 19 7707N Flexible oupling, 14 4... 0 7707L Large Diameter oupling... 1 7706 Reducing oupling... G-8 Hinged Lever oupling... 3-7 Outlet oupling... 4 7706-T & 7771-T Transition ouplings... 5 XH-70EP Extra Heavy Rigid oupling w/ep Gasket... 6 Flange dapters... 7 7041 Flange dapter, NSI lass 15/150... 8 7041 Flange dapters, PN10/16 & S 10 Table E... 9 7043 Flange dapter, NSI lass 300... 30 49 Sandwich Plate... 30 7180 & 7181 Universal Flange dapters... 31 7170 Solid Flange dapters, NSI lass 15/150... 3 Mechanical Tees... 33 M1 & 771 Mechanical Tee, Female Threaded Outlet... 34 M & 77 Mechanical Tee, Grooved-end Outlet... 36 73 Saddle-Let (Small Mechanical Tee)... 38 Performance Data Sheet... 39 onnect with the est! atalog 011

Shurjoint Grooved Mechanical ouplings atalog 011 The Shurjoint grooved piping system is one of the most advanced, versatile, economical and reliable systems available today. fter the pipe ends are grooved a gasket is mounted over the pipe ends. The coupling segments are then placed over the gasket and the bolts and nuts are fastened resulting in a secure and leak free joint. coupling can be installed 3 4 times faster than a comparable welded or brazed joint and there is no need for a flame or welding torch on the job site. grooved mechanical coupling can be installed by fastening a pair of bolts and nuts while using only a wrench or spanner, whereas a comparable flanged joint requires the fastening of many bolts and nuts with a pair of wrenches. The grooved system allows for easy material take-offs and unlike a threaded system, there is no need to allow for added pipe length for thread engagement. With removal of just a few bolts one can easily access the system for cleaning, maintenance, changes and or system expansion. Helpful Information to Ensure Proper ssembly Some couplings and components require the housing bolt pads to make metal-to-metal contact for proper assembly, while others require a specific bolt torque while maintaining equal bolt pad gaps. The icons and information below will help to identify those items to ensure proper assembly. Read and follow all installation instructions for the component being installed. Metal-to-metal contact: Tighten bolts and nuts until bolt pads make metal-to-metal contact. fter metal-to-metal contact is achieved, tighten nuts by another one quarter or one half turn to make sure the bolts and nuts are snug and secure. No torque wrench is required. Excessive torque may lead to bolt or joint failure. No Gap Metal-to-metal contact fter metal-to-metal, further tighten one quarter or half turn Torque required! olts and nuts must always be tightened to the required torque by using a torque wrench. Normally there will be some gaps seen between the bolt pads after the bolts and nuts are fully tightened. Models that require torque tightening include through 4 of model XH-1000, all sizes of models XH-70EP, SS-7X and 79 couplings. lways use a torque wrench Installation-Ready oupling The development of the Shurjoint installation-ready coupling has continued the advancement of grooved systems, making it possible to further speed installation and performance. The factory supplied couplings are installation ready with no loose parts and no disassembly required. #SS-7X 10 ~ 4 #79 ~ 0 Installation-Ready oupling 1 onnect with the est! opyright 011 Shurjoint

Rigid & Flexible ouplings Grooved mechanical couplings (GM) are available in both rigid and flexible models. rigid coupling is used in applications where a rigid joint is desired, similar to that of a traditional flanged, welded, and or threaded connection. To be considered rigid, a coupling would allow less than one degree of deflection or angular movement. Flexible couplings are designed to accommodate axial displacement, rotation and a minimum one degree of angular movement. Flexible couplings are used in applications that call for curved or deflected layouts and or when systems are exposed to outside forces beyond normal static conditions, such as seismic events or where vibration and or noise attenuation are a concern. oupling Housing Segment olt / Nut Groove oupling Key #7705 Flexible oupling Gasket Grooved couplings become less flexible as the pipe size increases. For sizes in excess of 18 (450 mm) couplings are very limited in their angular movement. Please refer to the following definition and test methods. Definition Grooved couplings are subjected to internal pressures and exterior bending forces during service. STM F1476-07 defines a rigid coupling as a joint where there is essentially no available free angular or axial pipe movement and a flexible coupling as a joint wherein there is available limited angular and axial pipe movement. ending Moment Test bending moments are calculated by the equation M = F (L), where F is weight of water filled pipe (Lbs) and L is hanger spacing x 1/ (feet). The table below shows test bending moments calculated using sch. 40 pipe with NFP 13 hanger spacing. Water filled pipe L Hanger Spacing Test ending Moment (STM F1476) Nom. Size Moment Moment (inches) N-m Lb-Ft 1½ 549 405 780 575 ½ 100 885 3 1645 113 4 471 183 5 3551 619 6 4803 3543 8 7663 565 10 11379 8393 1 15558 11475 14 18609 1375 16 499 179 Flexibility Proof Test Flexibility proof testing is conducted by applying a small bending moment, 10% of the listed moment, to the test assembly with no internal pressure. 4 model 7705 or 7707 flexible coupling deflects 3 4 degrees depending on the type of groove processed. F M = F(L) M = 10% listed moment L Rigid oupling - Max. Deflection atalog 011 Rigidity Proof Test Rigidity proof testing is conducted by applying 5% of the listed moment to the test assembly which is internally pressurized to the rated pressure. Pressurized to rated pressure M= 5% listed moment The rigid coupling shall pass the test when the angle has not changed more than angle θ. θ shall be calculated as follows: θ = 60 (minutes) [ (minutes) x (nominal pipe size in inches)]. In other words, when θ is less than 1 degree (60 minutes), the grooved mechanical coupling is verified as a rigid coupling and when θ is more than 1 degree (60 minutes), the GM is regarded as a flexible coupling. The maximum angles θ for rigid couplings are shown in the table below: Nom. Size θ, max θ, max. (inches) (minutes) (degrees) 1½ 57 0.95 56 0.93 ½ 55 0.9 3 54 0.90 4 5 0.87 5 50 0.83 6 48 0.80 8 44 0.73 10 40 0.67 1 36 0.60 14 3 0.53 16 8 0.47 ending Moment Proof Test The coupling shall resist a 100% listed bending moment while the assembly is internally pressurized to the rated pressure. M = 100% listed moment No internal pressure Pressurized to rated pressure onnect with the est! 13 opyright 011 Shurjoint

M-7 INSTLLTION REDY RIGID OUPLING Patented and Patents Pending atalog 011 The Shurjoint Model M-7 is designed for general service applications. The advanced design and features make this coupling the right choice to speed installation and performance. The M-7 is supplied installation ready with no loose parts and no disassembly required. The advanced housing and Fast-Fit gasket designs result in superior compression and sealing dynamics while reducing the possibility of gasket pinching. Hanging requirements correspond to NFP 13, SME 31.1 and 31.9. Working Pressure (STD, Roll-grooved) Max. Service Temperature.. 750 psi @100 F EPDM: 30 F / 110 lass 300 5 ar @38 Nitrile: 180 F / 8 Housing Segment ompression Pad *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Features Installation ready Enhanced joint rigidity Reduced chance of gasket pinching Superior compression & sealing capability Nominal Pipe Max. Working Max End xial Dimension olt Size O.D. Pressure Load Displacement Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 60.3 5 14.8 0 1.6 90 16 48.5 M10 x 55 0.9.375 750 330 0 0.06 3.54 4.96 1.90 ⅜ x ⅛.1 65 73.0 5 1.8 0 1.6 105 140 48.5 M10 x 55 1.1 ½.875 750 4870 0 0.06 4.13 5.51 1.90 ⅜ x ⅛.5 80 88.9 5 3.3 0 1.6 11 158 48.5 M10 x 70 1.6 3 3.500 750 710 0 0.06 4.40 6. 1.90 ⅜ x ¾ 3.6 100 114.3 5 53.3 0 3. 147 19 51.0 M10 x 70.3 4 4.500 750 1190 0 0.13 5.78 7.00.00 ⅜ x ¾ 5.0 15 141.3 5 81.5 0 1.6 175 8 51.0 M1 x 75 3.0 5 6.500 750 180 0 0.06 6.89 8.98.00 ½ x 3 6.6 150 168.3 5 115.6 0 1.6 03 55 51.0 M1 x 75 3.7 6 6.65 750 5840 0 0.06 8.00 10.04.00 ½ x 3 8.1 Step 1 Step Step 3 The Model M-7 is supplied factory assembled. Do not disassemble the coupling prior to installation. Gaskets and housing parts are not interchangeable with other style couplings. Place the coupling over one pipe end. The center gasket leg serves as your indication to stop. Insert the second pipe end or component into the coupling, butting it up to the center leg of the gasket. Tighten bolts and nuts until the housing segments and compression pads make metal-to-metal contact*. * Read and familiarize yourself with the complete Shurjoint installation instruction prior to installing, disassembling or adjusting any component. 14 onnect with the est! opyright 011 Shurjoint

Z05 RIGID OUPLING ngle-pad Design atalog 011 The Shurjoint Model Z05 is an angle-pad design rigid coupling for moderate pressure piping services including fire mains, long straight runs and valve connections. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so-called snaking of a long straight run. Support and hanging requirements correspond to NSI 31.1, 31.9 and NFP 13. With the removal of only one bolt you can make a fast and easy swing-over installation. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. The angle pad design allows for fast and easy swing-over installation with the removal of a single bolt. Nominal Pipe Max. Working Max. End xial Dimensions olts Size Size O. D. Pressure Load Displacement Weight mm / in mm / in ar/psi kn / Lbs mm / in mm / in mm / in mm / in No. mm / in Kgs / Lbs 3 4. 0.80 0 ~ 1. 66 10 46 M10 x 55 0.64 1¼ 1.660 300 649 0 ~ 0.05.60 4.00 1.81.. ⅜ x ⅛ 1.41 40 48.3 0 3.66 0 ~ 1. 7 109 46 M10 x 55 0.66 1½ 1.900 300 850 0 ~ 0.05.83 4.9 1.81.. ⅜ x ⅛ 1.46 50 60.3 0 5.71 0 ~ 1.7 85 117 47 M10 x 70 0.79.375 300 1330 0 ~ 0.07 3.35 4.61 1.85.. ⅜ x ¾ 1.74 65 73.0 0 8.37 0 ~ 1.7 98 13 47 M10 x 70 0.93 ½.875 300 1950 0 ~ 0.07 3.86 5.0 1.85.. ⅜ x ¾.05 76.1 0 9.09 0 ~ 1.7 100 136 47 M10 x 70 0.98 76.1 mm.. 3.000 300 10 0 ~ 0.07 3.94 5.35 1.85.. ⅜ x ¾.16 80 88.9 0 1.41 0 ~ 1.7 113 148 48 M10 x 70 1.0 3 3.500 300 885 0 ~ 0.07 4.45 5.83 1.88.. ⅜ x ¾.60 100 108.0 0 18.31 0 ~ 4.1 14 176 54 M10 x 70 1.64 4 4.50 300 450 0 ~ 0.16 5.59 6.93.13.. ⅜ x ¾ 3.6 114.3 0 0.51 0 ~ 4.1 146 18 53 M10 x 70 1.87 108.0 mm 4.500 300 4770 0 ~ 0.16 5.75 7.17.09.. ⅜ x ¾ 4.1 133.0 0 7.77 0 ~ 4.1 170 4 54 M1 x 75.33 133.0 mm.. 5.50 300 6456 0 ~ 0.16 6.69 8.8 13.. ½ x 3 5.14 139.7 0 30.64 0 ~ 4.1 173 7 53 M1 x 75.57 139.7 mm.. 5.500 300 715 0 ~ 0.16 6.81 8.94.09.. ½ x 3 5.67 15 141.3 0 31.35 0 ~ 4.1 175 9 53 M1 x 75.58 5 5.563 300 790 0 ~ 0.16 6.89 9.0.09.. ½ x 3 5.69 159.0 0 39.69 0 ~ 4.1 198 50 54 M1 x 75.75 159.0 mm.. 6.50 300 9199 0 ~ 0.16 7.80 9.84.13.. ½ x 3 6.06 165.1 0 4.80 0 ~ 4.1 00 46 54 M1 x 75 3.05 165.1 mm.. 6.500 300 9950 0 ~ 0.16 7.87 9.69.13.. ½ x 3 6.7 150 168.3 0 44.47 0 ~ 4.1 03 49 54 M1 x 75 3.07 6 6.65 300 10340 0 ~ 0.16 8.00 9.80.13.. ½ x 3 6.77 00 19.1 0 75.37 0 ~ 4.8 64 330 64 M16 x 135 6.07 8 8.65 300 1755 0 ~ 0.19 10.40 1.99.5.. ⅝ x 5 5 /16 13.38 16.3 0 73.45 0 ~ 4.8 60 340 64 M0 x 10 7.00 00 JIS.. 8.516 300 17079 0 ~ 0.19 10.4 13.39.50.. ¾ x 4¾ 15.43 onnect with the est! 15 opyright 011 Shurjoint

K-9 G-01 MODEL K-9 RIGID OUPLING - T&G Design - The Shurjoint Model K-9 is a T&G (tongue & groove) design coupling for moderate pressure applications where rigidity is required including valve connections, mechanical rooms, fire mains and long straight runs. The built-in teeth and T&G mechanism firmly graps the pipe ends to eliminate undesired flex. Support and hanging requirements correspond to NSI 31.1, 31.9 and NFP 13. The Model K-9 is recommended for services up to 0 bar (300 psi) depending on the size and wall thickness of the pipe being used. ll K-9 couplings are comprised of two identical housing segments, EPDM rubber gasket and plated track bolts and nuts. Housing segments are supplied with our standard painted finishes, i.e. orange or RL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available. K-9 couplings should always be installed so that the coupling bolt pads make metal to metal contact. Nom. Rating lass 150 Working Pressure (STD, Roll-Grooved) 300 psi @100 F 0 ar @38 Max. Service Temperature EPDM: 30 F / 110 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. MTERIL SPEIFITIONS Housing: Ductile Iron to STM 536, Gr. 65-45-1, min. tensile strength 448MPa (65,000 psi). Surface Finish: Standard painted finishes in orange or RL3000 red. Hot dip zinc galvanized (Option). Epoxy oatings in RL3000 red or other colors (Option) Rubber Gasket: Grade E EPDM (olor code: Green stripe) Good for cold & hot water up to +30 o F (+110 o ). lso good for services for water with acid, water with chlorine, deionized water, seawater and waste water, dilute acids, oil-free air and many chemicals. Not recommended for petroleum oils, minerals oils, solvents and aromatic hydrocarbons. Maximum Temperature Range: -30 o F (-34 o ) to +30 o F (+110 o ). (Option) Grade T Nitrile (olor code: Orange stripe) Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. lso good for water services under +66 o (+150 o F). Temperature range: -9 o to +8 o (-0 o F to +180 o F). Do not use for HOT WTER above +66 o (+150 o F) or HOT DRY IR above +60 o (+140 o F) Other options: Grade O - Fluoroelastomer. Grade L - Silicone. For additional details contact Shurjoint. olts & Nuts: Heat treated carbon manganese steel track bolts to STM 449-83a (or 183 Gr. ), minimum tensile strength 758 MPa (110,000 psi), Zinc electroplated, with heavy-duty hexagonal nuts to STM 563. Job Name: System No. Location: ontractor: pproved: Date: Engineer: pproved: Date: Shurjoint product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Shurjoint Technical Service. Shurjoint reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligations to make such changes and modifications on Shurjoint products previously subsequently sold. G-01-1/4Rev. F 01017 15a

K-9 G-01 MODEL K-9 RIGID OUPLING Nominal Size Pipe OD Max. Working Pressure Model K-9 Rigid oupling Max End Load xial Displacement Dimension mm mm ar kn mm mm mm mm mm Kgs in in PSI Lbs in in in in in Lbs 3 4. 0.80 0~1.6 65 110 45 M10 x 45 0.6 1.5 1.660 300 650 0~0.06.56 4.33 1.77 3/8 x 1-3/4 1.3 40 48.3 0 3.66 0~1.6 71 113 45 M10 x 55 0.6 1.5 1.900 300 850 0~0.06.80 4.45 1.77 3/8 x -1/8 1.3 50 60.3 0 5.71 0~1.6 83 14 45 M10 x 55 0.7.375 300 1330 0~0.06 3.7 4.88 1.77 3/8 x -1/8 1.5 65 73.0 0 8.37 0~1.6 98 137 45 M10 x 55 0.8.5.875 300 1950 0~0.06 3.86 5.39 1.77 3/8 x -1/8 1.8 65 76.1 0 9.09 0~1.6 10 140 45 M10 x 55 0.8.5 3.000 300 10 0~0.06 4.00 5.51 1.77 3/8 x -1/8 1.8 80 88.9 0 1.41 0~1.6 114 151 45 M10 x 70 1. 3 3.500 300 880 0~0.06 4.50 5.94 1.77 3/8 x -3/4.6 100 108.0 0 18.31 0~3. 137 19 51 M10 x 70 1.7 4 4.50 300 450 0~0.13 5.38 7.00.00 3/8 x -3/4 3.6 100 114.3 0 0.51 0~3. 143 190 51 M10 x 70 1.7 4 4.500 300 4770 0~0.13 5.63 7.48.00 3/8 x -3/4 3.6 15 133.0 0 7.77 0~3. 166 19 51 M1 x 75.1 5 5.50 300 6490 0~0.13 6.5 8.61.00 1/ x 3 4.6 15 139.7 0 30.64 0~3. 17 34 51 M1 x 75.1 5 5.500 300 710 0~0.13 6.77 9.1.00 1/ x 3 4.6 15 141.3 0 31.35 0~3. 175 8 51 M1 x 75.1 5 5.563 300 790 0~0.13 6.89 8.98.00 1/ x 3 4.6 150 159.0 0 39.69 0~3. 191 46 51 M1 x 75.0 6 6.50 300 900 0~0.13 7.50 9.67.00 1/ x 3 4.4 150 165.1 0 4.80 0~3. 197 5 51 M1 x 75.4 6 6.500 300 9950 0~0.13 7.75 9.9.00 1/ x 3 5.3 150 168.3 0 44.47 0~3. 00 55 53 M1 x 75.7 6 6.65 300 10340 0~0.13 7.87 10.04.09 1/ x 3 5.9 00 19.1 0 75.37 0~3. 58 355 61 M16 x 90 4.4 8 8.65 300 1750 0~0.13 10.16 13.98.40 5/8 x 3-1/ 9.7 MODEL K-9H RIGID OUPLING Model K-9H Rigid oupling Nominal Size Pipe OD Max. Working Pressure Max End Load Pipe End Separation Dimension mm mm ar kn mm mm mm mm mm Kgs in in PSI Lbs in in in in in Lbs 00 19.1 0 75.37 0~3. 61 33 63 M0 x 10 4.4 8 8.65 300 1750 0~0.13 10.9 13.08.48 3/4 x 4-3/4 9.7 olt Size olt Size Weight Weight G-03-/4 Rev.. E 01017 15b

K-9 G-01 LISTINGS / PPROVLS The information provided below is based on the latest listing and approval data at the time of publication. Listings/pprovals are subject to change and/or additions by the approvals agencies. ontact Shurjoint for the performance on other pipes and the latest listings and approvals Standard Pipe Nom. Size mm in 3 1¼" 40 1½" 50 " 65 ½" 65 3"OD 80 3" 100 4" culus FM VdS LP ar psi 0 300 0 300 0 300 0 300 0 300 0 300 0 300 ar psi 0 300 0 300 0 300 0 300 0 300 0 300 0 300 bar 16 16 16 ar psi 15 5 15 5 1 175 - - 16 16 16 1 175 1 175 1 175 Nom. Size mm in 15 5½"OD 15 5" 150 6½"OD 150 6" 00 8" 00 (K-9H) 8" culus FM VdS LP ar psi 0 300 0 300 0 300 0 300 0 300 0 300 ar psi 0 300 0 300 0 300 0 300 0 300 0 300 bar 16 ar psi 15 5 - - - 1 175 16 - - 16 15 5 0 300 Specialty Pipe Pipe XL-II S1387 DF /SF EL EF Fire-Flow FLF Sch. 5 Nom. culus FM culus FM culus FM culus FM FM FM culus culus Size psi psi psi psi psi psi psi psi psi psi psi psi 1 - - - - - - - - - - - 1¼" - 175 300 175-175 300 175-300 175 175 1½" - 175 300 175-175 - 175 175 300 175 - " 175 175 300 175 175 175 300 175 175-175 175 ½" 175 175 300 300 175 175 - - 175-175 175 3" 175 175 300 175 175 175 - - 175-175 175 4" - - 300 175 175 175 - - 175 300 175-5" - - 300 300 - - - - - - - - 6" - - 300 300 - - - - - - - - Pipe XL SPS LT Fire- Thread WST Ultra Eddy TL LS Gal-5 Super40 Super-XL Fire-Line Threadable EddyThread 40 Nom. culus culus FM FM FM FM FM FM FM culus culus Size psi psi psi psi psi psi psi psi psi psi psi 1 - - - - - 175 300-300 - - 1¼" - 175 175-175 175 300 175 300 300-1½" - - 175 300 175 175 300 175 300 300 - " 175 175 175 300 175 175 300 175 300 300 300 ½" 175 175 - - - - - 3" 175 175 - - 300 - - 5 refers to Listed Schedule 5 steel pipe. XL, XL-II refers to Listed XL, XL-II steel pipe manufactured by llied Tube & onduit orp. S1387(M) refers to ritish Standard Medium steel pipe. DF refers to Listed DYN-FLOW steel pipe manufactured by llied Tube & onduit orp. SF refers to Listed Super-Flo steel pipe manufactured by llied Tube & onduit orp. EL refers to Listed EDDYLITE steel pipe manufactured by ull Moose Tube o. EF refers to Listed EDDY FLOW steel pipe manufactured by ull Moose Tube o. FLF refers to Listed Fire-Line Flow steel pipe manufactured by Western International Forest Products Inc. SPS refers to Listed SPS Flow steel pipe manufactured by Yieh Phui Enterprise o Ltd LT refers to Listed LT steel pipe manufactured by llied Tube & onduit orp FLT refers to Listed Fire-Line Threadable steel pipe manufactured by Western International Forest Products Inc WST refers to Listed WST steel pipe manufactured by Wheatland Tube o ET40 refers to Listed Eddythread 40 steel pipe manufactured by ull Moose Tube o EZF refers to Listed EZ-Flow steel pipe manufactured by Northwest Pipe o FLT refers to Listed Fire-Line Threadable steel pipe manufactured by Western International Forest Products Inc G5 refers to Listed GL- 5 steel pipe manufactured by Idod Systems L SuXL, Su40 refers to Listed Super XL, Super 40 steel pipe manufactured by llied Tube & onduit orp XL or XL-II refers to Listed XL and XL-II steel pipe manufactured by llied Tube & onduit orp TL refers to Listed TL steel pipe manufactured by llied Tube & onduit orp G-03-3/4 Rev.. E 01017 15c

K-9 G-01 General Notes: Pressure ratings listed are WP (cold water pressure) or maximum working pressure within the service temperature range of the gasket used in the coupling. This rating may occasionally differ from maximum working pressures listed and/or approved by culus and/or FM as testing conditions and test pipes differ. For additional information contact Shurjoint. Maximum working pressures and end loads listed are total of internal and external pressures and loads based on Sch. 40 steel pipe with roll grooves to NSI/WW 606-07 specifications. For information on other pipe schedules contact Shurjoint. For one time field test only the maximum joint working pressure may be increased 1½ times the figures shown. Warning: Piping systems must always be depressurized and drained before attempting disassembly and or removal of any components. Shurjoint reserves the right to change specifications, designs and or standard equipment without notice and without incurring any obligations. G-03-4/4 Rev.. E 01017 15d

Z07 HEVY DUTY RIGID OUPLING atalog 011 The Shurjoint Model Z07 is an angle-pad design rigid coupling for general piping applications where rigidity is required including, mechanical rooms, valve connections fire mains and long straight runs. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint that resists flexural and torsional loads. Support and hanging requirements correspond to NSI 31.1, 31.9 and NFP 13. Note: Model Z07N two-segment couplings are now available in sizes 14-4. Model Z07 multi-segment couplings in sizes 14-4 are also available. ontact Shurjoint for the Z07 multisegment data sheet. Please specify the model required when ordering. Size Working Pressure (STD, Roll-grooved) Max. Service Temperature 1¼ 6 750 psi @100 F lass 300 3-150.. 5 ar @38 8 1 400 psi @100 F EPDM: 30 F / 110 lass 50 00-300.. 8 ar @38 Nitrile: 180 F / 8 14 4 300 psi @100 F lass 150 350-600.. 0 ar @38 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. 1-1/4" ~ 4" Nominal Max. Working Max. End xial Dimensions olts Size Size Pipe O. D. Pressure Load Displacement Weight mm / in mm / in ar/psi kn / Lbs mm / in mm / in mm / in mm / in No. mm / in Kgs / Lbs 3 4. 5 7.7 0~1. 68 105 47 M10 x 55 0.7 1¼ 1.660 750 160 0 ~ 0.05.68 4.13 1.85.. ⅜ x ⅛ 1.6 40 48.3 5 9.5 0~1. 74 115 47 M10 x 55 0.9 1½ 1.900 750 130 0 ~ 0.05.91 4.53 1.85.. ⅜ x ⅛.0 50 60.3 5 14.84 0~1.7 86 10 48 M10 x 70 1.1.375 750 330 0 ~ 0.07 3.39 4.7 1.88.. ⅜ x ¾.4 65 73.0 5 1.75 0~1.7 100 140 48 M10 x 70 1.1 ½.875 750 4875 0 ~ 0.07 3.94 5.50 1.88.. ⅜ x ¾.4 76.1 5 3.64 0~1.7 10 146 48 M10 x 70 1. 76.1 mm.. 3.000 750 5300 0 ~ 0.07 4.00 5.75 1.88.. ⅜ x ¾.6 80 88.9 5 3.6 0~1.7 115 157 48 M1 x 75 1.4 3 3.500 750 710 0 ~ 0.07 4.53 6.18 1.88.. ½ x 3 3.1 100 114.3 5 53.33 0~4.1 147 199 54 M1 x 75.0 4 4.500 750 1190 0 ~ 0.16 5.78 7.83.13.. ½ x 3 4.4 139.7 5 79.66 0~4.1 175 35 54 M16 x 90 3.0 139.7 mm.. 5.500 750 17810 0 ~ 0.16 6.88 9.5.13.. ⅝ x 3½ 6.6 15 141.3 5 81.50 0~4.1 177 35 54 M16 x 90 3.0 5 5.563 750 180 0 ~ 0.16 6.97 9.5.13.. ⅝ x 3½ 6.6 165.1 5 111.7 0~4.1 00 59 54 M16 x 90 3.4 165.1 mm.. 6.500 750 4870 0 ~ 0.16 7.87 10.0.13.. ⅝ x 3½ 7.5 150 168.3 5 115.6 0~4.1 03 63 54 M16 x 90 3. 6 6.65 750 5840 0 ~ 0.16 8.00 10.35.13.. ⅝ x 3½ 7.1 00 19.1 8 105.51 0~4.8 68 34 64 M0 x 10 7.1 8 8.65 400 3360 0 ~ 0.19 10.55 13.46.5.. ¾ x 4¾ 15.7 50 73.0 8 163.81 0~3. 37 431 65 --- 10.4 10 10.750 400 3690 0 ~ 0.13 1.86 16.98.56.. ⅞ x 6½ 7.4 300 33.9 8 30.59 0~3. 377 480 65 --- 11.8 1 1.750 400 51040 0 ~ 0.13 14.86 18.88.56.. ⅞ x 6½ 6.0 16.3 8 10.83 0~3. 64 340 64 M0 x 10 7.4 00 JIS.. 8.516 400 770 0 ~ 0.13 10.39 13.39.50.. ¾ x 4¾ 16.3 67.4 8 157.16 0~3. 31 397 65 --- 10.5 50 JIS.. 10.58 400 34800 0 ~ 0.13 1.63 15.63.56.. ⅞ x 6½ 3.1 318.5 8.97 0~3. 37 45 65 --- 1.4 300 JIS.. 1.539 400 49370 0 ~ 0.13 14.65 17.80.56.. ⅞ x 6½ 7.4 350 (Z07N) 355.6 0 199.53 0~3. 408 505 75 --- 16.0 14 14.000 300 46160 0 ~ 0.13 16.06 19.89.95.. ⅞ x 5½ 35.3 400 (Z07N) 406.4 0 59.30 0~3. 467 554 75 --- 17.9 16 16.000 300 6090 0 ~ 0.13 18.39 1.84.95.. ⅞ x 5½ 30.5 450 (Z07N) 457. 0 38.18 0~3. 55 607 79 ---.3 18 18.000 300 76300 0 ~ 0.13 0.68 3.89 3.11.. ⅞ x 5½ 40.1 500 (Z07N) 508.0 0 405.16 0~3. 58 698 76 --- 6. 0 0.000 300 9400 0 ~ 0.13.93 7.47 3.00.. 1 x 5½ 57.8 600 (Z07N) 609.6 0 583.43 0~3. 687 803 78 --- 3.1 4 4.000 300 13650 0 ~ 0.13 7.05 31.61 3.06.. 1 x 5½ 70.8 ontact Shurjoint for the data sheet of multi-segment type Z07 14 through 4 16 onnect with the est! opyright 011 Shurjoint

XH-1000 EXTR HEVY RIGID OUPLING atalog 011 The Shurjoint Model XH-1000 is an extra heavy rigid coupling designed for high pressure services up to 1000 psi (70 bar). This coupling is painted green and is supplied with a standard -shaped gasket and heavy duty bolts and nuts. The Model XH-1000 can be installed on standard roll or cut grooved pipes or components. Sizes through 4 require a bolt torque of 60-70 Ft-Lbs. with some bolt gaps. For sizes 6 and above, the bolt pads will make metal to metal contact when properly installed with no torque wrench required. Working Pressure Max. Service (STD, Roll-grooved) Temperature " - 6" 1000 psi @100 F lass 400 70 ar @38 EPDM: 30 F / 110 8" - 1" 750 psi @100 F Nitrile: 180 F / 8 lass 300 5 ar @38 *Working pressure is based on connection with cut or roll-grooved standard wall steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal Max. Working Max. End xial Dimensions olts Size Pipe O. D. Pressure Load Displacement Size Weight mm / in mm / in ar/psi kn / Lbs mm / in mm / in mm / in mm / in No. in Kgs / Lbs 50 60.3 70 0.0 0 ~ 3.6 90 150 49 1.6 ⅝ X ¾.375 1000 4430 0 ~ 0.14 3.50 5.90 1.9... 3.4 65 73.0 70 9.3 0 ~ 3.6 10 168 49 1.7 ⅝ X ¾ ½.875 1000 6490 0 ~ 0.14 4.0 6.6 1.9... 3.8 80 88.9 70 43.4 0 ~ 3.6 13 188 49. ⅝ X ¾ 3 3.500 1000 960 0 ~ 0.14 4.86 7.38 1.9... 4.8 100 114.3 70 71.8 0 ~ 6.4 155 53 3.8 ¾ x 4¾ 4 4.500 1000 15900 0 ~ 0.5 6.09 8.74.10... 8.4 150 168.3 70 155.6 0 ~ 6.4 18 95 57 8.0 ⅞ x 5½ 6 6.65 1000 34450 0 ~ 0.5 8.58 11.61.5... 17.6 00 19.1 5 196.0 0 ~ 6.4 75 364 70 10.9 1 x 5½ 8 8.65 750 43800 0 ~ 0.5 10.83 14.33.75... 4.0 50 73.0 5 304. 0 ~ 6.4 334 44 75 14. 1 x 5½ 10 10.750 750 68040 0 ~ 0.5 13.15 16.70.95... 31. 300 33.9 5 48. 0 ~ 6.4 390 480 75 16.7 1 x 5½ 1 1.750 750 95710 0 ~ 0.5 15.35 18.90.95... 36.7 Sizes through 4 require a bolt torque of 60 70 Ft-Lbs (80 95 N-m). Normally you can see some gaps between the bolt pads. Sizes 6 through 1 are designed to make a metal-to-metal contact when properly installed. onnect with the est! 17 opyright 011 Shurjoint

7705 FLEXILE OUPLING atalog 011 The Shurjoint Model 7705 is a standard flexible coupling designed for use in a variety of moderate pressure general piping applications. The Model 7705 coupling features flexibility that can accommodate misalignment, distortion, thermal stress, vibration, noise and seismic tremors. The Model 7705 can even accommodate an arced or curved piping layout. See Typical pplications - Flexible ouplings on page 14. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Max. ngular Movement Dimensions Nominal ctual Working Max. End xial Per oupling olt Size O.D. Pressure Load Displacement Degree Per Pipe Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in ( ) mm / m in / ft mm / in mm / in mm / in mm / in Kgs / Lbs 5 33.7 0 1.75 1.6 96 57 100 46 M10 x 45 0.6 5-30 1 1.315 300 410 0.065. 1.16.4 3.94 1.81 ⅜ x 1¾ 1.3 3 4.4 0.80 1.6 76 66 103 46 M10 x 55 0.7 4-0 1¼ 1.660 300 650 0.065. 0.91.60 4.06 1.81 ⅜ x ⅛ 1.5 40 48.3 0 3.66 1.6 66 7 108 46 M10 x 55 0.7 3-48 1½ 1.900 300 850 0.065. 0.80.83 4.5 1.81 ⅜ x ⅛ 1.6 50 60.3 0 5.71 1.6 53 84 19 48 M10 x 55 0.8 3-01.375 300 1330 0.065. 0.63 3.31 5.08 1.89 ⅜ x ⅛ 1.8 65 73.0 0 8.37 1.6 44 99 14 48 M10 x 55 0.9-30 ½.875 300 1950 0.065. 0.5 3.90 5.59 1.89 ⅜ x ⅛.0 76.1 0 9.09 1.6 4 10 147 48 M10 x 55 1.0 76.1mm - 4.. 3.000 300 10 0.065. 0.50 4.0 5.79 1.89 ⅜ x ⅛.1 80 88.9 0 1.41 1.6 36 116 169 48 M1 x 75 1.3-04 3 3.500 300 880 0.065. 0.43 4.57 6.65 1.89 ½ x 3.8 101.6 0 16.1 1.6 31 19 00 5 M1 x 75 1.6 101.6 mm 1-48.. 4.000 300 3770 0.065. 0.38 5.07 7.90.05 ½ x 3 3.6 108.0 0 18.31 3. 59 138 19 5 M1 x 75 1.9 108.0 mm 3-4.. 4.50 300 450 0.15. 0.71 5.43 7.56.05 ½ x 3 4.1 100 114.3 0 0.51 3. 55 145 197 5 M1 x 75 1.9 3-1 4 4.500 300 4770 0.15. 0.67 5.71 7.76.05 ½ x 3 4.1 133.0 0 7.77 3. 48 165 31 5 M16 x 90.3 133.0 mm - 46.. 5.50 300 6460 0.15. 0.58 6.50 9.09.05 5/8 x 3½ 5.1 139.7 0 30.64 3. 46 170 33 5 M16 x 90.7 139.7 mm - 37.. 5.500 300 710 0.15. 0.55 6.69 9.17.05 ⅝ x 3½ 5.9 15 141.3 0 31.35 3. 45 17 34 5 M16 x 90.7-36 5 5.563 300 790 0.15. 0.54 6.77 9.1.05 ⅝ x 3½ 5.9 159.0 0 39.69 3. 40 190 53 54 M16 x 90 3.0 159.0 mm - 18.. 6.50 300 900 0.15. 0.48 7.48 9.96.13 ⅝ x 3½ 6.6 165.1 0 4.80 3. 39 196 61 54 M16 x 90 3.1 165.1 mm - 14.. 6.500 300 9950 0.15. 0.47 7.7 10.8.13 ⅝ x 3½ 6.8 150 168.3 0 44.47 3. 38 00 68 6 M16 x 90 3. - 10 6 6.65 300 10340 0.15. 0.45 7.87 10.55.44 ⅝ x 3½ 7.0 00 19.1 0 75.37 3. 8 60 350 64 M16 x 90 5.8 1-40 8 8.65 300 1750 0.15. 0.35 10.4 13.78.5 ⅝ x 3½ 1.8 00 (7705H) 19.1 0 75.37 3. 9 66 343 63 M0 x 10 7.1 1-40 8 8.65 300 1750 0.15. 0.35 10.47 13.50.48 ¾ x 4¾ 15.7 50 73.0 0 117.01 3. 3 343 45 64 M0 x 10 8. 1-0 10 10.750 300 710 0.15. 0.8 13.50 16.73.5 ¾ x 4¾ 18.0 300 33.9 0 164.71 3. 0 390 467 64 --- 10.8 1-08 1 1.750 300 3880 0.15. 0.4 15.35 18.39.5 ⅞ x 6½ 3.8 16.3 0 73.45 3. 30 54 348 6 M0 x 10 5.8 00 JIS 1-4.. 8.516 300 17080 0.15. 0.36 10.00 13.70.44 ¾ x 4¾ 1.8 67.4 0 11.6 3. 4 337 40 64 M0 x 10 8.0 50 JIS 1 -.. 10.58 300 6100 0.15. 0.9 13.7 16.54.5 ¾ x 4¾ 17.6 318.5 0 159.6 3. 0 389 478 64 --- 10.3 300 JIS 1-10.. 1.539 300 37030 0.15. 0.5 15.31 18.81.5 ⅞ x 6½.6 Deflection or angular movement is the maximum value that a coupling allows with no internal pressure. ll DIN size 7705 couplings up to DN150 size and the DN00 7705H coupling are VdS approved in addition to culus and FM approvals. 18 onnect with the est! opyright 011 Shurjoint

7707 HEVY DUTY FLEXILE OUPLING atalog 011 The Shurjoint Model 7707 heavy duty flexible coupling is designed for use in a variety of general piping applications of moderate or high pressure services. Working pressure is usually dictated by the wall thickness and rating of the pipe being used. The Model 7707 couplings feature flexibility that can accommodate misalignment, distortion, thermal stress, vibration, noise and seismic tremors. The Model 7707 can even accommodate an arced or curved piping layout. See Typical pplications - Flexible ouplings on page 14. Size Working Pressure (STD, Roll-grooved) Max. Service Temperature 3/4 6 750 psi @100 F lass 300 0-150.. 5 ar @38 EPDM: 30 F / 110 8 1 400 psi @100 F Nitrile: 180 F / 8 lass 50 00-300.. 8 ar @38 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. 3/4"~1" Nominal ctual Max. Working Max. End xial ngular Movement Dimensions olts Size O.D. Pressure Load Displacement Per oupling Per Pipe Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in ( ) mm / m in / ft mm / in mm / in mm / in No. mm / in Kgs / Lbs 0 6.7 5.91 1.6 116 54 95 46 M10 x 45 0.6 6 46 ¾ 1.050 750 650 0.065.. 1.4.13 3.74 1.81.. ⅜ x 1¾ 1.3 5 33.4 5 4.55 1.6 96 61 99 46 M10 x 55 0.8 5 30 1 1.315 750 100 0.065.. 1.16.40 3.90 1.81.. ⅜ x ⅛ 1.7 3 4. 5 7.7 1.6 76 70 108 46 M10 x 55 1.0 4 0 1¼ 1.660 750 160 0.065.. 0.91.76 4.5 1.81 ⅜ x ⅛.1 40 48.3 5 9.5 1.6 66 76 14 45 M1 x 60 1.0 3 48 1½ 1.900 750 130 0.065.. 0.80 3.0 4.88 1.81.. ½ x ⅜.1 50 60.3 5 14.84 1.6 53 90 133 46 M1 x 75 1. 3 01.375 750 330 0.065.. 0.63 3.50 5.4 1.81.. ½ x 3.6 65 73.0 5 1.75 1.6 44 10 150 46 M1 x 75 1.3 30 ½.875 750 4870 0.065.. 0.5 4.00 5.90 1.81.. ½ x 3.9 76.1 5 3.64 1.6 4 103 150 46 M1 x 75 1.3 76.1mm 4.. 3.000 750 5300 0.065.. 0.50 4.06 5.90 1.81.. ½ x 3.9 80 88.9 5 3.5 1.6 36 14 171 48 M1 x 75 1.5 04 3 3.500 750 710 0.065.. 0.43 4.88 6.73 1.89...½ x 3 3.3 100 114.3 5 53.33 3. 55 157 13 54 M16 x 90.1 3 1 4 4.500 750 1190 0.15. 0.67 6.18 8.38.13.. ⅝ x 3½ 4.6 139.7 5 79.66 3. 46 186 41 54 M16 x 90 3.1 139.7mm 37.. 5.500 750 17810 0.15. 0.55 7.3 9.50.13.. ⅝ x 3½ 6.8 15 141.3 5 81.50 3. 45 186 41 54 M16 x 90 3.3 36 5 5.563 750 180 0.15. 0.54 7.3 9.50.13.. ⅝ x 3½ 7. 165.1 5 111.7 3. 39 11 86 54 M0 x 10 3.6 165.1mm 14.. 6.500 750 4870 0.15. 0.47 8.11 11.6.13.. ¾ x 4¾ 7.9 150 168.3 5 115.6 3. 38 14 89 54 M0 x 10 3.7 10 6 6.65 750 5840 0.15. 0.45 8.4 11.38.13.. ¾ x 4¾ 8.1 00 19.1 8 105.51 3. 9 76 356 6 --- 6.6 1 40 8 8.65 400 33.60 0.15. 0.35 10.86 14.00.44.. ⅞ x 5½ 14.5 50 73.0 8 163.81 3. 3 343 45 64 --- 10.6 1 0 10 10.750 400 3690 0.15. 0.8 13.50 16.73.5.. ⅞ x 6½ 3.3 300 33.9 8 30.59 3. 0 390 467 64 --- 1.0 1 08 1 1.750 400 51045 0.15. 0.5 15.35 18.39.5.. ⅞ x 6½ 6.4 16.3 8 10.83 3. 30 76 356 6 M0 x 10 6.6 00 JIS 1 4.. 8.516 400 770 0.15. 0.36 10.86 14.00.44.. ¾ x 4¾ 14.5 67.4 8 157.16 3. 4 337 40 64 --- 10. 50 JIS 1.. 10.58 400 34800 0.15. 0.9 13.7 16.54.5 ⅞ x 6½.4 318.5 8.97 3. 0 389 478 64 --- 11.6 300 JIS 1 10.. 1.539 400 49370 0.15. 0.5 15.31 18.81.5 ⅞ x 6½ 5.5 Deflection or angular movement is the maximum value that a coupling allows with no internal pressure. onnect with the est! 19 opyright 011 Shurjoint

7707N FLEXILE OUPLING atalog 011 The Shurjoint Model 7707N is a twosegment, flexible coupling for use with standard pipe, roll or cut grooved to WW 606 specifications. For 6", see page 1 for groove dimensions. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum times the working pressure. 14" ~ 4" Size: 6" Nominal ctual Max. Working Pressure xial ngular Movement Dimensions olts Size O.D. XS (0.500 )* STD (0.375 ) LW (0.31 ) Displacement Degree Per Per Pipe Size Weight mm / in mm / in ar / PSI ar / PSI ar / PSI mm / in oupling ( ) mm / m in / ft mm / in mm / in mm / in No. in Kgs / Lbs 350 355.6 0 0 17 6.4 9.0 41 479 75 15.7 1 0 ⅞ x 6½ 14 14.000 300 300 50 0.50. 0.11 16.3 18.85.95... 34.5 400 406.4 0 0 17 6.4 8.0 463 547 75 18.4 0 54 1 x 6½ 16 16.000 300 300 50 0.50. 0.10 18.3 1.53.95... 40.5 450 457. 0 0 17 6.4 7.0 50 605 79.3 0 48 1 x 6½ 18 18.000 300 300 50 0.50. 0.08 0.45 3.81 3.11... 47.1 500 508.0 0 0 17 6.4 6.0 571 656 79 4.5 0 44 1 x 6½ 0 0.000 300 300 50 0.50. 0.08.48 5.8 3.11... 54.0 550 558.8 0 0 17 6.4 6.0 61.4 74.6 79 8.6 0 39 ⅛ x 6½.000 300 300 50 0.50. 0.07 4.46 8.5 3.11... 63.0 600 609.6 0 0 17 6.4 5.0 674 780 79 9.5 0 36 ⅛ x 6½ 4 4.000 300 300 50 0.50. 0.06 6.55 30.70 3.11....65.1 650 660.4 0 0 17 6.4 5.0 754 84 15.6 68.3 0 34 4 ⅞ x 9⅝ 6 6.0 300 300 50 0.50. 0.06 9.68 33.15 4.94... 150.5 Deflection or angular movement is the maximum value that a coupling allows under no internal pressure. * Pressure ratings are based on cut-grooved XS carbon steel pipe. 30" 7707L couplings on a chill water system 0 onnect with the est! opyright 011 Shurjoint

7707L LRGE DIMETER OUPLING atalog 011 The Shurjoint Model 7707L large diameter couplings in sizes 8-4 (700mm - 1050 mm) are designed for joining large diameter IPS pipe that can be roll grooved. ll couplings feature a six to eight segment design, incorporating two bolts at each segment joint to ensure a positive connection and seal. Working Pressure (STD, Roll-grooved) Max. Service Temperature.. 175 psi @100 F EPDM: 30 F / 110 lass 15 1 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum times the working pressure. 8"~ 36" 40"~ 4" Nominal Pipe Max. Working Pressure xial Dimensions olts Size O. D. XS (.500 )* STD (.375 ) LW (.31 ) Displacement No Size Weight mm / in mm / in ar / PSI ar / PSI ar / PSI mm / in mm / in mm / in mm / in in Kgs / Lbs 700 711. 17 1 9 6.4 813 90 17 8 1 ⅞ x 4 8 8.0 50 175 15 0.50 3.0 36.3 5.0.. 180 750 76.0 17 1 9 6.4 864 97 17 95 1 ⅞ x 4 30 30.0 50 175 15 0.50 34.0 38.3 5.0.. 09 800 81.8 17 1 9 6.4 914 10 17 94 1 ⅞ x 4 3 3.0 50 175 15 0.50 36.0 40.3 5.0.. 07 900 914.4 17 1 9 6.4 1016 114 17 96 1 ⅞ x 4 36 36.0 50 175 15 0.50 40.0 44.3 5.0.. 1 1000 1016.0 17 1 9 6.4 1105 145 146 13 16 1 x 3½ 40 40.0 50 175 15 0.50 43.5 49.0 5.8.. 71 1050 1066.8 17 1 9 6.4 1156 195 146 140 16 1 x 3½ 4 4.0 50 175 15 0.50 45.5 51.5 5.8.. 308 * Pressure ratings are based on cut-grooved XS carbon steel pipe. Standard Roll Groove for Large Diameter IPS Pipe O.D. t 1. Square cut: Max. allowable tolerances from square cut are 1.6mm (0.060 ).. The gasket seating surface shall be free from deep scores, marks, or ridges that would prevent a positive seal. 3. The dimensions are average values. The groove must be of uniform depth around the entire circumference. Use a Shurjoint groove or rule to check the groove diameter. 4. The t is the minimum allowable wall thickness that may be roll-grooved. 5. The d is for reference use only. The groove depth shall be determined by the groove diameter. 6. Flare Diameter: The pipe end that may flare when the groove is rolled shall be within this limit when measured at the extreme end of the pipe. d d t Max Pipe Outside Diameter Nominal +0.8, -1.6 ±0.8 +0, -1.6 Groove Depth Min. llow llowed Size asic Tolerance +0.03, -0.06 ±0.03 +0, -0.063 (ref) Wall thick Flare Dia. mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in 650 660.4 +.36-0.79 44.5 15.9 647.7 6.4 6.4 665.5 6 OD 6.0-0.093-0.031 1.75 0.65 5.5 0.5 0.5 6. 700 711. +.36-0.79 44.5 15.9 698.5 6.4 6.4 716.3 8 OD 8.0-0.093-0.031 1.75 0.65 7.5 0.5 0.5 8. 750 76.0 +.36-0.79 44.5 15.9 749.3 6.4 6.4 767.1 30 OD 30.0-0.093-0.031 1.75 0.65 9.5 0.5 0.5 30. 800 81.8 +.36-0.79 44.5 15.9 800.1 6.4 6.4 817.9 3 OD 3.0-0.093-0.031 1.75 0.65 31.5 0.5 0.5 3. 900 914.4 +.36-0.79 44.5 15.9 901.7 6.4 6.4 919.5 36 OD 36.0-0.093-0.031 1.75 0.65 35.5 0.5 0.5 36. 1000 1016.0 +.36-0.79 50.8 15.9 1003.3 6.4 6.4 106. 40 OD 40.0-0.093-0.031.00 0.65 39.5 0.5 0.5 40.4 1050 1066.8 +.36-0.79 50.8 15.9 1054.1 6.4 6.4 1071.9 4 OD 4.0-0.093-0.031.00 0.65 41.5 0.5 0.5 4. onnect with the est! 1 opyright 011 Shurjoint

7706 REDUING OUPLING atalog 011 The Shurjoint Model 7706 reducing coupling allows for direct reduction on a piping run and eliminates the need for a concentric reducer and additional couplings. The specially designed rubber gasket helps prevent small pipe from telescoping into larger pipe during vertical assembly. The Model 7706 coupling should not be used with an end cap, as the end cap could be sucked into the pipe by the vacuum created when a system is being drained. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Max. Working Max. End xial ngular Movement Dimensions olts Size O. D. Pressure Load Displacement Per oupling Per Pipe Size Weight mm / in mm / in ar/psi kn / Lbs mm / in Degree ( ) mm / m in / ft mm / in mm / in mm / in mm / in Kgs / Lbs 40 x 3 48.3 x 4. 0.89 0 ~ 3. 33.0 7 108 46 M10 x 55 0.8 3-48 1½ x 1¼ 1.900 x 1.660 300 650 0 ~ 0.13. 0.40.83 4.5 1.81 ⅜ x ⅛ 1.8 50 x 40 60.3 x 48.3 0 3.79 0 ~ 3. 6.0 85 1 48 M10 x 55 0.9 3-0 x 1½.375 x 1.900 300 850 0 ~ 0.13. 0.31 3.35 4.80 1.89 ⅜ x ⅛.0 65 x 50 73.0 x 60.3 0 5.90 0 ~ 3..0 96 144 48 M10 x 55 1. - 30 ½ x.875 x.375 300 1330 0 ~ 0.13. 0.6 3.78 5.67 1.89 ⅜ x ⅛.6 76.1 x 60.3 0 5.90 0 ~ 3. 1.0 10 138 48 M10 x 55 1. 76.1mm x 50-4.. 3.000 x.375 300 1330 0~0.13. 0.5 4.0 5.43 1.89 ⅜ x ⅛.6 80 x 50 88.9 x 60.3 0 5.90 0 ~ 3. 18.0 116 168 48 M1 x 75 1.5 04 3 x 3.500 x.375 300 1330 0~0.13. 0. 4.57 6.61 1.89 ½ x 3 3.3 80 x 65 88.9 x 73.0 0 8.66 0 ~ 3. 18.0 116 168 48 M1 x 75 1.7-04 3 x ½ 3.500 x.875 300 1950 0 ~ 0.13. 0. 4.57 6.61 1.89 ½ x 3 3.7 88.9 x 76.1 0 9.41 0 ~ 3. 18.0 116 168 48 M1 x 75 1.7 80 x 76.1mm - 04.. 3.500 x 3.000 300 115 0 ~ 0.13. 0. 4.57 6.61 1.89 ½ x 3 3.7 100 x 50 114.3 x 60.3 0 5.90 0 ~ 4.8 1.0 146 198 5 M1 x 75.4-4 4 x 4.500 x.375 300 1330 0 ~ 0.19. 0.5 5.75 7.80.05 ½ x 3 5.3 100 x 65 114.3 x 73.0 0 8.66 0 ~ 4.8 1.0 146 198 5 M1 x 75.6-4 4 x ½ 4.500 x.875 300 1950 0 ~ 0.19. 0.5 5.75 7.80.05 ½ x 3 5.7 114.3 x 76.1 0 9.41 0 ~ 4.8 1.0 146 198 5 M1 x 75.6 100 x 76.1mm - 4.. 4.500 x 3.000 300 115 0 ~ 0.19. 0.5 5.75 7.80.05 ½ x 3 5.7 100 x 80 114.3 x 88.9 0 1.84 0 ~ 4.8 1.0 146 198 5 M1 x 75.4-4 4 x 3 4.500 x 3.500 300 890 0 ~ 0.19. 0.5 5.75 7.80.05 ½ x 3 5.3 139.7 x 114.3 0 1.3 0 ~ 6.4 3.0 160 4 5 M16 x 90 3.8 139.7mm x 100-36.. 5.500 x 4.500 300 4770 0 ~ 0.5. 0.7 6.30 9.84.05 ⅝ x 3½ 8.4 15 x 100 141.3 x 114.3 0 1.3 0 ~ 6.4 3.0 160 4 5 M16 x 90 3.6-36 5 x 4 5.563 x 4.500 300 4770 0 ~ 0.5. 0.7 6.30 9.84.05 ⅝ x 3½ 7.9 165.1 x 88.9 0 1.84 0 ~ 6.4 0.0 0 69 5 M16 x 90 4.6 165.1mm x 80-14.. 6.500 x 3.500 300 890 0 ~ 0.5. 0.3 7.95 10.59.05 ⅝ x 3½ 10.1 150 x 80 168.3 x 88.9 0 1.84 0 ~ 6.4 19.0 08 75 5 M16 x 90 4.6-1 6 x 3 6.65 x 3.500 300 890 0 ~ 0.5. 0.3 8.19 10.83.05 ⅝ x 3½ 10.1 165.1 x 114.3 0 18.95 0 ~ 6.4 0.0 0 69 5 M16 x 90 4.5 165.1mm x 100-14.. 6.500 x 4.500 300 460 0 ~ 0.5. 0.3 7.95 10.59.05 ⅝ x 3½ 9.9 150 x 100 168.3 x114.3 0 18.95 0 ~ 6.4 19.0 08 75 5 M16 x 90 4.5-1 6 x 4 6.65 x 4.500 300 460 0 ~ 0.5. 0.3 8.19 10.83.05 ⅝ x 3½ 9.9 00 x 150 19.1 x 168.3 0 46.03 0 ~ 6.4 15.0 60 334 57 M0 x 10 6.5 1-40 8 x 6 8.65 x 6.65 300 10350 0 ~ 0.5. 0.18 10.4 13.15.4 ¾ x 4¾ 14.3 19.1 x 165.1 0 44.9 0 ~ 6.4 15.0 60 334 57 M0 x 10 6.5 00 x 165.1mm 1-40.. 8.65 x 6.500 300 9960 0 ~ 0.5. 0.18 10.4 13.15.4 ¾ x 4¾ 14.3 Deflection or angular movement is the maximum value that a coupling allows with no internal pressure. onnect with the est! opyright 011 Shurjoint

g-8 hinged lever coupling atalog 011 The Model G-8 Hinged Lever oupling is designed for quick connect and disconnect services. The housing segments are hinged with a locking lever handle for easy assembly. The use of the split pin can secure and prevent the accidental opening of the coupling. Working Pressure (STD, Roll-grooved) Max. Service Temperature.. 300 psi @100 F EPDM: 30 F / 110 lass 150 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Split pin Nominal Pipe Max. Working xial Dimensions Deflection Size O. D. Pressure Displacement Degree Weight mm / in mm / in ar / PSI mm / in mm / in mm / in mm / in ( ) Kgs / Lbs 40 48.3 0 0 1.6 75 118 47 1.0 3-48' 1½ 1.900 300 0 0.06.95 4.65 1.85.. 50 60.3 0 0 1.6 86 11 48 1.1 3-01'.375 300 0 0.06 3.39 4.76 1.89..4 65 73.0 0 0 1.6 9 150 48 1.4-30' ½.875 300 0 0.06 3.6 5.91 1.89. 3.1 76.1 0 0 1.6 9 150 48 1.4 76.1 mm - 4'.. 3.000 300 0 0.06 3.6 5.91 1.89. 3.1 80 88.9 0 0 1.6 119 163 48 1.8-14' 3 3.500 300 0 0.06 4.69 6.4 1.89. 4.0 100 114.3 0 0 3. 165 05 5.7 3-1' 4 4.500 300 0 0.13 6.50 8.07.05. 5.9 139.7 0 0 3. 189 53 5 4.9 139.7 mm - 37'.. 5.500 300 0 0.13 7.44 9.96.05. 10.8 15 141.3 0 0 3. 189 53 5 4.9-36' 5 5.563 300 0 0.13 7.44 9.96.05. 10.8 165.1 0 0 3. 13 78 5 6.0 165.1 mm - 14'.. 6.500 300 0 0.13 8.39 10.94.05. 13. 150 168.3 0 0 3. 16 81 5 6.0-10' 6 6.65 300 0 0.13 8.50 11.06.05. 13. 00 19.1 0 0 3. 78 356 6 9.7 1-40' 8 8.65 300 0 0.13 10.95 14.0.44. 1.4 50 73.0 0 0 3. 343 45 64 16.4 1-0' 10 10.750 300 0 0.13 13.50 17.80.5. 36.1 Deflection or angular movement is the maximum value that a coupling allows under no internal pressure. Expansion Pipe Lever handles are factory assembled tight for safety. The use of an expansion pipe will aid the easy opening and closing. Expansion pipes are available upon request. onnect with the est! 3 opyright 011 Shurjoint

-7 OUTLET OUPLING atalog 011 The Model -7 Outlet oupling combines the features of a coupling and a reducing outlet. The -7 facilitates an easy reducing branch outlet without the need of a mechanical tee or reducing tee and couplings. The -7 is available with grooved, male threaded or female threaded outlets. This fitting is recommended for fire sprinkler and other pipelines of moderate pressure. The -7 Outlet oupling can be used for dry pipe systems or vacuum services up to 10 inhg or 54 mmhg, which may occur when the system is drained. Grooved Outlet T Working Pressure Max. Service (STD, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Threaded Outlet Nominal Size Max. Max. Dimensions Run Outlet Working xial End olt pipe FPT Gr / MPT Pressure Displacement Load T* Size Weight mm / in mm / in mm / in ar / PSI mm / in kn / Lbs mm / in mm / in mm / in mm / in mm / in Kgs / Lbs.. 15 --- 0 0~. 5 --- 114 70. 1... ½ --- 300 0.81~0.88...06 --- 4.50.75..6 40 0 --- 0 0~ 3.7 5 --- 114 70 M10 x 55 1. 1½ ¾ --- 300 0.81~0.88 850.06 --- 4.50.75 ⅜ x ⅛.6.. 5 --- 0 0~. 49 --- 114 70. 1.3.. 1 --- 300 0.81~0.88.. 1.94 --- 4.50.75..9.. 15 --- 0 0~.. 59 --- 17 70.. 1.4.. ½ --- 300 0.81~0.88...3 --- 5.00.75. 3.1 50 0 --- 0 0~ 5.7 59 --- 17 70 M10 X 55 1.4 ¾ --- 300 0.81~0.88 1330.3 --- 5.00.75 ⅜ x ⅛ 3.1.. 5 33.4 0 0~. 56 89 17 70. 1.5.. 1 1 300 0.81~0.88...0 3.50 5.00.75. 3.3.. 15 --- 0 3~38.. 56 --- 161 83..... ½ --- 300 1.5~1.50...0 --- 6.33 3.5. 4.8.. 0 --- 0 3~38. 65 --- 161 83..1.. ¾ --- 300 1.5~1.50...56 --- 6.33 3.5. 4.6 65 5 --- 0 3~38 8.4 6 --- 161 83 M1 X 60.0 ½ 1 --- 300 1.5~1.50 10.44 --- 6.33 3.5 ½ x ⅜ 4.4.. 3 4. 0 3~38. 64 94 161 83..3.. 1¼ 1¼ 300 1.5~1.50...5 3.70 6.33 3.5. 5.1.. 40 48.3 0 3~38.. --- 94 161 83...4.. 1½ 1½ 300 1.5~1.50.. --- 3.70 6.33 3.5. 5.9.. 0 --- 0 3~38. 7 --- 175 83..7.. ¾ --- 300 1.5~1.50...83 --- 6.87 3.5. 5.9.. 5 33.4 0 3~38. 70 10 175 83..8 80 1 1 300 1.5~1.50 1.4.75 4.00 6.87 3.5 M1 X 75 6. 3 3 ---- 0 3~38 890 70.0 10.0 175.0 83.0 ½ x 3.8.. 1¼ --- 300 1.5~1.50...75 4.00 6.87 3.5. 6... 48.3 48.3 0 3~38. 70.0 10 175 83..9.. 1½ 1½ 300 1.5~1.50...75 4.00 6.87 3.5. 6.4.. 0 --- 0 41~46. 94 --- 11 93. 4... ¾ --- 300 1.63~1.81.. 3.70 --- 8.31 3.66. 9. 100 5 33.4 0 41~46 0.5 91 --- 11 93. 4.3 4 1 1 300 1.63~1.81 4770 3.58 --- 8.31 3.66 M16 X 90 9.5.. 40 48.3 0 41~46. 84 14 11 93 ⅝ x 3½ 4.3.. 1½ 1½ 300 1.63~1.81.. 3.31 4.88 8.31 3.66. 9.5.. 50 60.3 0 41~46. 89.0 14 11 93. 4.5.. 300 1.63~1.81.. 3.50 4.88 8.31 3.66. 9.9.. 0 --- 0 41~46. 11 --- 76 94. 6.0.... ¾ --- 300 1.63~1.81.. 4.76 --- 10.86 3.70. 13... 5 --- 0 41~46. 11 --- 76 94. 6.0 150 1 --- 300 1.63~1.81 44.5 4.76 --- 10.86 3.70 M16 X 90 13. 6 40 48.3 0 41~46 9950 11 154 76 94 ⅝ x 3½ 6... 1½ 1½ 300 1.63~1.81.. 4.76 6.06 10.86 3.70. 13.6.. 50 60.3 0 41~46. 111.0 154 76 94. 6.5.. 300 1.63~1.81.. 4.4 6.06 10.86 3.70. 14.3 FPT : Female threaded outlet Gr: Grooved outlet MPT: Male threaded outlet *T : enter of run pipe to end of outlet pipe (dimensions approximate). Female threaded outlet only. 4 onnect with the est! opyright 011 Shurjoint

7706-T TRNSITION OUPLING atalog 011 Model 7706-T Transition ouplings allows for a direct transition from IPS pipe sizes to ISO pipe sizes. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. ISO PIPE IPS PIPE Nominal Pipe Max. Working Max. End xial ngular Movement Dimensions olts Size O. D. Pressure Load Displacement Per oupling Per Pipe Size Weight mm / in mm / in ar/psi kn / Lbs mm / in Degree ( ) mm / m in / ft mm / in mm / in mm / in mm / in Kgs / Lbs 73.0 x 76.1 0 5.90 0 ~ 3. 1.0 10 138 48 M10 x 55 1. ½ x 76.1mm - 4...875 x 3.000 300 1330 0 ~ 0.13. 0.5 4.0 5.43 1.89 ⅜ x ⅛.6 168.3 x 165.1 0 44.9 0 ~ 6.4 19.0 00 70 53 M16 x 90 3.5 6 x 165.1mm 1-06.. 6.65 x 6.500 300 9960 0 ~ 0.5. 0.3 7.87 10.63.09 ⅝ x 3½ 7.7 *Deflection or angular movement is the maximum value that a coupling allows with no internal pressure. MODEL 7771-T Transition coupling The Shurjoint Model 7771-T Transition oupling allows for a direct transition from IPS pipe sizes to JIS pipe sizes. vailable in nominal pipe sizes from 8 through 1 this coupling can accommodate a combination of pipes, valves and or fittings with a single coupling. olt pads are designed to make metal to metal contact to provide for a secure and rigid joint. The stepped exterior design of the housings help to ensure the correct positioning of IPS and JIS sides. Stepped Design Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 IPS PIPE JIS PIPE *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal ctual Pipe O.D. Max. Working Max. Total xial Dimensions olts Size IPS JIS Pressure End Load Displacement Size Weight mm / in mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm Kgs / Lbs 00 19.1 16.3 0 75.37 3. 59 335 63 7.0 M16 x 135 8 8.65 8.515 300 1750 0.13 10.0 13.19.50. 15.4 50 73.0 67.4 0 117.01 3. 316 386 63 9.0 M0 x 10 10 10.750 10.58 300 7190 0.13 1.46 15.0.50. 19.8 300 33.9 318.5 0 164.71 3. 367 448 63 11.0 M x 165 1 1.750 1.539 300 3880 0.13 14.45 17.64.50. 4. onnect with the est! 5 opyright 011 Shurjoint

XH-70EP EXTR HEVY RIGID OUPLING With End Protection (EP) Gasket atalog 011 The Model XH-70EP is designed for use with plastic coated or cement lined pipe. The EP (end protection) gasket serves to form a continuous lined surface at the joint and also helps protect the pipe ends from corrosion. This coupling is rated up to 500 psi (175 bar) when used in conjunction with machined EP cut grooves and the applicable pipe. UTION: lways fasten the bolts to the required torque. EP Gasket Nominal Max. Working Max. End Dimensions olt / Nut olt Size Pipe O. D. Pressure Load Size Torque Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in No. in N-m / Lbs - Ft Kgs / Lbs 50 60.3 175 50 90 150 49 80-10 1.6 ⅝ x ¾.375 500 11070 3.54 5.90 1.9... 60-90 3.4 65 73.0 175 73. 103 168 49 80-10 1.7 ⅝ x ¾ ½.875 500 160 4.06 6.61 1.9... 60-90 3.8 80 88.9 175 108.6 1 188 51 80-10. ⅝ x ¾ 3 3.500 500 4040 4.80 7.40.00... 60-90 4.8 100 114.3 175 179.5 157 55 100-135 3.8 ¾ x 4¾ 4 4.500 500 39740 6.18 8.74.17... 74-170 8.4 150 168.3 140 311.3 18 95 57 170-75 8.0 ⅞ x 5½ 6 6.65 000 68910 8.58 11.61.5... 15-00 17.6 00 19.1 140 57.6 75 364 70 75-400 10.9 1 x 5½ 8 8.65 000 116790 10.83 14.33.75... 00-300 4.0 50 73.0 88 514.8 334 44 75 75-400 14. 1 x 5½ 10 10.750 150 113400 13.15 16.70.95... 00-300 31. 300 33.9 88 74.7 390 480 75 75-400 16.7 1 x 5½ 1 1.750 150 159510 15.35 18.93.95... 00-300 36.7 *Pressures quoted are based on EP cut grooved XS (Sch. 80) pipe. EP ut-groove specification O.D. d T 1. EP cut-grooves are for plastic coated or cement lined pipe to be connected with Shurjoint XH-70EP couplings only. Do not roll groove pipe, which can damage the coating or lining and or create flared pipe ends.. lways use plain-end square cut pipe. Do not use beveled end pipe. 3. lways use an EP gasket with a XH-70EP coupling. Do not use a standard gasket. 4. The gasket seating area shall be free from deep scores, marks, or ridges that could prevent a positive seal. Nominal Pipe O. D. Gasket Seat Groove Width Groove Dia. Grv. Depth Min. Wall Size asic Tolerance asic Tol. asic Tol. asic Tol. d thickness T mm / in mm / in mm / in mm / in mm / in ± mm / in +0.5/+0.010 mm / in +0/+0 (ref.) mm / in 50 60.3 +0.61-0.61 14.7 ±0.5 6.48-0.13 57.15-0.38 1.60 3.91.375 +0.04-0.04 0.56 ±0.010 0.55-0.005.50-0.015 0.063 0.154 65 73.0 +0.74-0.74 14.7 ±0.5 6.48-0.13 69.09-0.46 1.98 4.78 ½.875 +0.09-0.9 0.56 ±0.010 0.55-0.005 7.0-0.018 0.078 0.188 80 88.9 +0.89-0.79 14.7 ±0.5 6.48-0.13 84.94-0.46 1.98 4.78 3 3.500 +0.035-0.031 0.56 ±0.010 0.55-0.005 3.344-0.018 0.078 0.188 100 114.3 +1.14-0.79 15.37 ±0.38 7.75-0.13 110.08-0.51.11 5.16 4 4.500 +0.045-0.031 0.605 ±0.015 0.305-0.005 4.334-0.00 0.083 0.03 150 168.3 +1.60-0.79 15.37 ±0.38 7.75-0.13 163.96-0.56.16 5.56 6 6.65 +0.063-0.031 0.605 ±0.015 0.305-0.005 6.455-0.0 0.085 0.19 00 19.1 +1.60-0.79 18.14 ±0.38 10.16-0.5 14.4-0.64.34 6.05 8 8.65 +0.063-0.031 0.714 ±0.015 0.400-0.010 8.441-0.05 0.09 0.38 50 73.0 +1.60-0.79 18.14 ±0.38 10.16-0.5 68.8-0.69.39 6.35 10 10.750 +0.063-0.031 0.714 ±0.015 0.400-0.010 10.56-0.07 0.094 0.50 300 33.9 +1.60-0.79 18.14 ±0.38 10.16-0.5 318.9-0.76.77 7.09 1 1.750 +0.063-0.031 0.714 ±0.015 0.400-0.010 1.531-0.030 0.109 0.79 6 onnect with the est! opyright 011 Shurjoint

atalog 011 Flange dapters Shurjoint offers a variety of flange adapters through 4 (50mm 600mm) to transition from a flanged system to a grooved system. Flange drillings available include NSI lass 15/150, lass 300, PN 10/16 and S 10 Table E. Flange adapters through 1 are supplied hinged as a single assembly while 14 through 4 (7041N) are supplied with two independent segments and a draw kit. Hinged Flange Segment Gasket Factory Supplied olt & Nut Factory Supplied olts & Nuts Flange Segment Gasket lways use factory-supplied bolts and nuts to assemble flange segments. The use of other bolts may cause joint failure. 7041 " ~ 1" 7041N 14" ~ 4" (With a draw kit) 14 4 : Supplied with a draw kit Important Notes 1. Models 7041 and 7043 flange adapters require a hard flat face for effective sealing. When the mating surface is not adequate as with the serrated faces of some valves or rubber-faced wafer valves, a sandwich plate (Model 49, see page 30) must be used. #7041 Flange Sandwich Plate #7041 Flange Flange to mate (Rubber surface) Rubber faced or lined Flange to mate (Serrated face). The Model 7041 flange adapter has small triangular teeth inside the key shoulder to prevent the pipe from rotating. The teeth should be ground off when mating to a rubber-lined flange, plastic pipe and or light wall pipe. 3. Models 7041 and 7043 flange adapters shall not be used as anchor points for tierods across non-restrained joints. 4. When assembling a Model 7041 or 7043 flange adapter against a butterfly valve or ball valve, make sure that the outside diameter of the flange adapters do not Interfere interfere with the valve actuator or the mounting pad of the actuator. 5. olt tightening sequence: Like a regular flange joint, it is important to make flange faces contact parallel. Tighten nuts alternately in the sequence of diagonally opposite pairs as shown below until the flange faces meet and make a metal-tometal contact. 1 8 5 4 3 6 7 Hinged 1 1 5 8 9 4 3 Sandwich Plate Regular Flange Gasket utterfly Valve 10 7 6 Hinged 11 onnect with the est! 7 opyright 011 Shurjoint

7041 FLNGE DPTER - NSI lass 15/150 atalog 011 The Shurjoint Model 7041 flange adapters through 1 are supplied hinged as a single assembly, while 14-4 (7041N) are supplied with two independent segments and a draw kit. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 Tooth D E D E *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Hydrostatic Shell Test: 450 psi (30 bar) per NSI 16.5. - 1 (hinged) 7041N 14-4 (supplied with a draw kit) Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load D E Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm / in No. in Kgs / Lbs 50 60.3 0 5.71 15 11 19 60 87... 1.8 4 ⅝.375 300 1330 6.00 4.75 0.75.36 3.4 4.0 65 73.0 0 8.37 178 140 73 10....3 4 ⅝ ½.875 300 1950 7.00 5.50 0.87.87 4.00 5.1 80 88.9 0 1.41 190 15 4 89 116....8 4 ⅝ 3 3.500 300 880 7.50 6.00 0.94 3.50 4.56 6. 100 114.3 0 0.51 9 191 4 114 141... 3.8 8 ⅝ 4 4.500 300 4770 9.00 7.50 0.94 4.50 5.56 8.3 15 141.3 0 31.35 54 16 4 141 171... 4.7 8 ¾ 5 5.563 300 790 10.00 8.50 0.94 5.56 6.73 10.3 150 168.3 0 44.47 79 41 5 168 198... 5.0 8 ¾ 6 6.65 300 10340 11.00 9.50 1.00 6.6 7.79 11.1 00 19.1 0 75.37 343 98 8 19 54... 7.8 8 ¾ 8 8.65 300 1750 13.50 11.75 1.1 8.6 10.00 17. 50 73.0 0 117.01 406 36 30 73 308... 11.7 1 ⅞ 10 10.750 300 710 16.00 14.5 1.18 10.75 1.1 5.7 300 33.9 0 164.71 48 43 3 34 359... 17.1 1 ⅞ 1 1.750 300 3880 19.00 17.00 1.5 1.75 14.13 37.6 350 355.6 0 198.53 533 476 37 356 416... 8.0 1 1 14 14.000 300 46160 1.00 18.75 1.44 14.0 16.40 61.7 400 406.4 0 59.3 597 540 37 406 467... 35.0 16 1 16 16.000 300 6090 3.50 1.5 1.44 16.0 18.40 77.1 450 457. 0 38.18 635 578 40 457 508... 39.0 16 1⅛ 18 18.000 300 76300 5.80.75 1.56 18.0 0.00 86.0 500 508.0 0 405.18 699 635 43 508 57... 49.5 0 1⅛ 0 0.000 300 9400 7.50 5.00 1.69 0.0.50 109.1 550 558.8 0 490.4 749 69 48 551 588... 60.4 0 1¼.000 300 113980 9.50 7.5 1.90 1.70 3.15 133.1 600 609.6 0 583.43 813 749 49 60 635... 71.5 0 1¼ 4 4.000 300 135650 3.00 9.50 1.94 3.70 5.0 157.6 Required bolt torque The tables show standard torque values for proper assembly of Shurjoint flange adapters. Use a torque wrench so that all the nuts are tightened equally with a same torque value. Shurjoint flange adapters are sealed with elastic (rubber) gaskets, which require much lower torques than those that utilize metallic gaskets. Required Torque for Model 7041 Flange dapters (NSI lass 15/150) Nom. Size olt Size Required Torque inch inch N-m Lbs-Ft " ⅝ (4) 30-50 - 37 ½" ⅝ (4) 30-50 - 37 3" ⅝ (4) 40-68 30-50 4" ⅝ (8) 40-68 30-50 5" ¾ (8) 40-68 30-50 6" ¾ (8) 40-68 30-50 8" ¾ (8) 68-90 50-66 10" ⅞ (1) 80-10 59-89 1" ⅞ (1) 80-10 59-89 14" 1 (1) 100-135 74-100 16" 1 (16) 100-135 74-100 18" 1⅛(16) 110-160 81-118 0" 1⅛ (0) 110-160 81-118 4" 1¼ (0) 135-190 100-140 ( ): No. of bolts Required Torque for Model 7041 Flange dapters (PN 10/16) Nom. Size olt Size Required Torque mm mm N-m Lbs-Ft 50 M16 (4) 30-50 - 37 65 M16 (4) 30-50 - 37 80 M16 (8) 40-68 30-50 100 M16 (8) 40-68 30-50 15 M0 (8 ) 40-68 30-50 150 M0 (8) 40-68 30-50 00 M0 (1) 68-90 50-66 50 M4 ( 1) 80-10 59-89 300 M4 (1) 80-10 59-89 350 M4 (16) 100-135 74-100 400 M7 (16) 100-135 74-100 450 M7 (0) 110-160 81-118 500 M30 (0) 110-160 81-118 600 M33 (0) 135-190 100-140 ( ): No. of bolts 8 onnect with the est! opyright 011 Shurjoint

7041 FLNGE DPTER - PN 10 / PN 16 atalog 011 The Shurjoint Model 7041 flange adapter allows for a direct connection with PN 10/16 flanges. The two-segment design provides an easy and fast installation. through 1 Working Pressure Max. Service (STD, Roll-grooved) Temperature 5 psi @100 F EPDM: 30 F / 110 PN 16.. 16 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Hydrostatic Shell Test: 1.5 times the working pressure, nonshock cold water. flange adapters are supplied hinged as a single assembly, while 14-4 (7041N) are supplied with two independent segments and a draw kit. Tooth D E - 1 (hinged) 7041N 14-4 (supplied with a draw kit) D E Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load D E Size Weight mm mm ar kn mm mm mm mm mm mm No. Kgs 50 60.3 16 4.6 165 15 60 87 M16 4.3 65 76.1 16 7.3 185 145 76 105 M16 4.6 80 88.9 16 9.9 00 160 4 89 116 M16 8 3. 100 114.3 16 16.4 0 180 4 114 141 M16 8 3.4 150 165.1 16 34. 85 40 4 165 195 M0 8 5.1 150 168.3 16 35.6 85 40 4 168 198 M0 8 4.6 00 19.1 16 60.3 340 95 4 19 54 M0 1 7.8 50 73.0 16 93.6 405 355 6 73 308 M4 1 11.4 300 33.9 16 131.8 460 410 8 34 359 M4 1 13.7 350 355.6 16 158.8 50 470 30 356 416 M4 16 3.0 400 406.4 16 07.4 580 55 3 406 467 M7 16 8.0 450 457. 16 6.5 640 585 36 457 508 M7 0 4.5 500 508.0 16 34.0 715 650 36 508 57 M30 0 47.0 600 609.6 16 466.7 840 770 40 610 706 M33 0 73.0 Note: " - 6" flange drilling to PN10 / PN16 and 8" and above to PN16. See page 8 for required bolt torque. MODEL 7041 FLNGE DPTER - S 10-E The Shurjoint Model 7041 flange adapter allows for a direct connection with S 10 Table E flanges. The two-segment design provides an easy and fast installation. through 1 flange adapters are supplied hinged as a single assembly, while 14-4 (7041N) are supplied with two independent segments and a draw kit. Working Pressure (STD, Roll-grooved) Max. Service Temperature 00 psi @100 F EPDM: 30 F / 110 PN 14.. 14 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Hydrostatic Shell Test: 1.5 times the working pressure, nonshock cold water. D E Tooth D E - 1 (hinged) 7041N 14-4 (supplied with a draw kit) Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load D E Size Weight mm mm ar kn mm mm mm mm mm No. in Kgs 65 76.1 14 6.36 165 17 76 105 4 ⅝.5 80 88.9 14 8.69 184 146 4 89 116 4 ⅝ 3.4 100 114.3 14 14.36 16 178 4 114 141 8 ⅝ 4.0 15 139.7 14 1.45 54 10 4 140 170 8 ⅝ 4.5 150 165.1 14 9.96 79 35 4 165 195 8 ¾ 5.0 00 19.1 14 5.76 337 9 9 19 54 8 ¾ 8.4 50 73.0 14 81.91 406 356 30 73 308 1 ¾ 10.8 300 33.9 14 115.30 457 406 3 34 359 1 ⅞ 1.0 350 355.6 14 138.97 57 470 3 356 416 1 ⅞ 0.8 400 406.4 14 181.51 578 51 3 406 467 1 ⅞ 1.0 450 457. 14 9.73 641 584 36 457 508 16 ⅞ 8.9 500 508.0 14 83.61 705 641 38 508 57 16 ⅞ 38.1 600 609.6 14 408.4 86 756 4 610 706 16 1⅛ 54.6 onnect with the est! 9 opyright 011 Shurjoint

7043 FLNGE DPTER - NSI LSS 300 atalog 011 The Shurjoint Model 7043 flange adapter allows for direct connection of a grooved system to NSI lass 300 flanged components. " through 8" Model 7043 flange adapters are supplied hinged as a single assembly, while large sizes are supplied with separate segments. X Z Working Pressure (STD, Roll-grooved) Max. Service Temperature 750 psi @100 F EPDM: 30 F / 110 lass 300.. 5 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Hydrostatic Shell Test: 115 psi (77 bar) per NSI 16.5. D E Y Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load X Y Z D E Size Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm / in No. in Kgs / Lbs 50 60.3 5 14.84 165 17 4 60 87....4 8 ⅝.375 750 330 6.50 5.00 0.94.36 3.41 5.3 65 73.0 5 1.75 191 149 7 73 99... 3.6 8 ¾ ½.875 750 4870 7.50 5.88 1.06.88 3.91 7.9 80 88.9 5 3.8 10 168 30 89 115... 4.6 8 ¾ 3 3.500 750 710 8.5 6.63 1.19 3.50 4.53 10.0 100 114.3 5 53.33 54 0 33 114 140.... 7.8 8 ¾ 4 4.500 750 1190 10.00 7.95 1.31 4.50 5.53 17.3 15 141.3 5 81.50 79 35 37 141 171... 9.6 8 ¾ 5 5.563 750 180 11.00 9.5 1.44 5.56 6.7 1. 150 168.3 5 115.6 318 70 38 168 198... 1.5 1 ¾ 6 6.65 750 5840 1.50 10.63 1.50 6.63 7.78 7.6 00 19.1 5 195.96 381 330 43 19 5... 16.4 1 ⅞ 8 8.65 750 43800 15.00 13.00 1.69 8.63 9.94 36. 50 73.0 5 304.3 445 387 49 73 313... 5.8 16 1 10 10.750 750 68040 17.50 15.5 1.94 10.75 1.31 56.9 300 33.9 5 48.5 51 451 51 34 364... 35. 16 1⅛ 1 1.750 750 95710 0.50 17.75.00 1.75 14.31 77.7 MODEL 49 SNDWIH PLTE The Model 7041 and 7043 flange adapters require a hard flat surface for effective gasket sealing. sandwich plate is required and should always be used when the mating surface is not adequate as with the serrated faces of some valves or the rubber-faced or rubber-lined flange adapters of a wafer valve. Material: Mild-steel, electro-zinc plated. Stainless steel, type 304 or 316 is available on request. E D Sandwich plate Nominal Size E D mm / in mm / in mm / in 50 95 54 3.74.13 65 118 67 ½ 4.65.64 80 130 81 3 5.1 3.19 100 158 105 4 6. 4.13 15 188 18 5 7.40 5.00 150 16 155 6 8.50 6.10 00 71 05 8 10.67 8.07 50 36 58 10 1.83 10.15 300 381 305 1 15.00 1.00 350 414 337 14 16.30 13.5 400 470 387 16 18.50 15.5 450 533 438 18 1.00 17.5 500 584 489 0 3.00 19.5 600 69 590 4 7.5 3.5 30 onnect with the est! opyright 011 Shurjoint

7180 UNIVERSL FLNGE DPTER atalog 011 The Model 7180 Universal Flange dapter provides a rigid transition from a flanged component to a grooved system. The single unit is compatible for a range of flange types including NSI lass 15/150, PN10, PN16, and JIS 10K. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. X Y Z D Y : Flange Drilling olts Size Nominal Pipe NSI PN JIS S Size O.D. L X 15 / 150 10,16 10K 10E Z Dia No. Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 60.3 64 165 11 15 10 114 16 M16 4.30.375.50 6.50 4.75 4.9 4.7 4.49 0.63 ⅝ 4 5.10 65 73.0 70 185 140 145 140 17 16 M16 4.96 ½.875.75 7.8 5.50 5.70 5.50 5.00 0.63 ⅝ 4 6.53 76.1 70 185 140 145 140 17 16 M16 4.90 76.1mm.. 3.000.75 7.8 5.50 5.70 5.50 5.00 0.63 ⅝ 4 6.40 80 88.9 70 00 15 160 150 146 16 M16 8 3.39 3 3.500.75 7.87 6.00 6.30 5.90 5.75 0.63 ⅝ 4 7.47 100 114.3 76 9 191 180 175 178 16 M16 8 3.85 4 4.500 3.00 9.00 7.50 7.09 6.89 7.00 0.63 ⅝ 8 8.49 139.7 76 50 16 10 10 10 M16 / M0 8 6.50 139.7mm.. 5.500 3.00 9.84 8.50 8.7 8.7 8.7 0.87 ⅝ / ¾ 8 14.33 15 141.3 76 50 16 10 10 --- M16 / M0 8 6.50 5 5.563 3.00 9.84 8.50 8.7 8.7 --- 0.87 ⅝ / ¾ 8 14.33 165.1 76 91 41 40 40 35 4 M0 8 6.30 165.1mm.. 6.500 3.00 11.46 9.50 9.45 9.45 9.30 0.94 ¾ 8 13.86 150 168.3 89 91 41 40 40 --- 4 M0 8 5.7 6 6.65 3.50 11.46 9.50 9.45 9.45 --- 0.94 ¾ 8 1.58 00 19.1 10 343 98 95 90 9 9 M0 8 / 1 13.65 8 8.65 4.00 13.50 11.75 11.61 11.4 11.50 1.14 ¾ 8 / 1 30.09 16.3 10 343 98 95 90 --- 9 M0 8 / 1 13.65 00 JIS.. 8.516 4.00 13.50 11.75 11.61 11.4 --- 1.14 ¾ 8 / 1 30.09 L MODEL 7181 UNIVERSL REDUING FLNGE DPTER The Model 7181 Universal Reducing Flange dapter provides a rigid transition between a flanged piping system and a one or two-size reduced grooved system without the need of a concentric reducer. The flange drilling is compatible to NSI 15/150, PN10/16, S-10E and JIS 10K. Working Pressure Max. Service (STD, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. X Y Z D Y: Flange Drilling olts Nominal Pipe NSI PN JIS Size OD L X Z 15 / 150 10, 16 10K D Dia. No. Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lb 80 x 50 88.9 x 60.3 75.0 08.0 16.0 15 160 150 60.3 M16.70 8 3 x 3.500 x.375.95 8.19 0.63 8.00 6.30 5.90 ⅝. 5.95 100 x 65 114.3 x 73.0 76.0 5.5 16.0 191 180 175 73.0 M16 4.00 8 4 x ½ 4.500 x.875 3.00 8.88 6.30 7.5 7.09 6.89.875 ⅝. 8.80 100 x 76.1mm 114.3 x 76.1 76.0 5.5 16.0 191 180 175 76.1 M16 4.00 8.. 4.500 x 3.000 3.00 8.88 6.30 7.5 7.09 6.89 3.000 ⅝. 8.80 100 x 80 114.3 x 88.9 75.0 5.5 16.0 191 180 175 88.9 M16 3.45 8 4 x 3 4.500 x 3.500.95 8.88 0.63 7.50 7.09 6.89 3 ⅝. 7.61 150 x 100 168.3 x 114.3 75.0 91.0 4.0 41 40 40 114.3 M0 7.08 8 6 x 4 6.65 x 4.500.95 11.46 0.95 9.50 9.45 9.45 4 ¾. 15.61 L onnect with the est! 31 opyright 011 Shurjoint

7170 FLNGE DPTeR - NSI LSS 15/150 atalog 011 The Model 7170 Flange daptor provides a rigid transition between NSI class 15/150 flanged components and a grooved system. Working Pressure (STD, Roll-grooved) Max. Service Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 X Y Z D olt Hole *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. L Nominal Pipe olt olt Hole Size X Y Z Size Dia. No. D L Weight mm / in mm / in mm / in mm / in in in mm / in mm / in Kgs / Lbs 50 406.4 36.0 30.0 73.0 17.0.0 ⅞ 1 1 10 16.00 14.5 1.18... 10.75 5.00 48.4 300 483.0 43.0 3.0 33.9 17.0 8.0 ⅞ 1 1 1 19.00 17.00 1.5... 1.75 5.00 61.6 350 533.0 476.3 35.0 355.6 17.0 49.5 1 1⅛ 1 14 1.00 18.75 1.38... 14.00 5.00 108.9 400 597.0 539.7 37.0 406.4 17.0 50.0 1 1⅛ 16 16 3.50 1.5 1.46... 16.00 5.00 110 450 635.0 577.8 40.0 457. 140.0 6.5 1⅛ 1¼ 16 18 5.00.75 1.57... 18.00 5.50 137.5 500 699.0 635.0 43.0 508.0 15.0 7.0 1⅛ 1¼ 0 0 7.50 5.00 1.69... 0.00 6.00 158.4 600 813.6 749.3 48.0 609.6 15.0 99.5 1¼ 1⅜ 0 4 3.00 9.50 1.89... 4.00 6.00 18.9 3 onnect with the est! opyright 011 Shurjoint

Mechanical Tees Hole-cutting atalog 011 Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M1 features a female threaded outlet and M features a grooved end outlet. Model 771 (female threaded outlet) and 77 (grooved end outlet) are available in 8 sizes. The Model 73 Saddlelet features a compact-design for making direct connections to sprinkler heads, drop nipples and or gauges. The hole-cut method of pipe preparation is required when using mechanical tees, mechanical crosses, and saddle-lets. The method of pipe preparation requires the cutting or drilling of a specified hole size on the centerline of the pipe. lways use the correct hole saw size as shown in Table 1 Ridgid Model No. H-300 Hole utting Tool 16mm ( ⅝" ) and Table 1-b and never use a torch for cutting a hole. fter the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole lignment Tab olt Pad Gasket Lower Housing Upper Housing Nut olt Locating ollar should be inspected to ensure a clean smooth surface, free of any indentations or projections that could affect proper gasket sealing. The area within the dimension should also be inspected and must be free of dirt, scale or any imperfection that could affect proper seating or assembly of the fitting. Hole Size: The hole sizes are dictated by the branch size of the mechanical tee. When bolts are tightened with a proper torque, the outlet housing makes metal to metal contact with the outer surface of the pipe. Metal-to-metal Gap It is normal to see bolt pad gaps Table 1 Hole Sizes for Mechanical Tees unit: mm/in ranch Hole Dimensions Surface Size Hole Saw Max dia. Preparation Size llowed 15, 0, 5 38 41 89 ½, ¾, 1 1½ 1⅝ 3½ 3, 40 51* 54* 10 1¼, 1½ ⅛ 4 50 64 67 114 ½ ⅝ 4½ 65 70 73 11 ½ ¾ ⅞ 4¾ 80 89 9 140 3 3½ 3⅝ 5½ 100 114 118 165 4 4½ 4⅝ 6½ *See Table 1-b for exception.` Table 1-b Exception The hole must be cleanly cut using the correct size hole-saw and shall have a smooth edge. Never use a torch for cutting a hole. Hole Dimensions Surface Run x ranch Hole Saw Max dia. Preparation Size llowed 50 x 3 / 50 x 40 45 47 10 x1¼ / x 1½ 1¾ 1⅞ 4 onnect with the est! 33 opyright 011 Shurjoint

M1 MEHNIL TEE FEMLE THREDED OUTLET atalog 011 Threads are NPT per NSI 1.0.1 or SPT per ISO 7. UL/FM working pressure is 0 bar (300 psi). The Model 771 is available in 8" sizes. Working Pressure (STD, Roll-grooved) Max. Service Temperature.. 300 psi @100 F EPDM: 30 F / 110 lass 150 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. T D Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 T* D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 x 15 60.3 x 1.3 38 50 63.5 38.1 115.9 81 M10 x 55 0.99 x ½.375 x 0.840 1.50 1.97.50 1.50 4.56 3.19 ⅜ x ⅛.18 50 x 0 60.3 x 6.7 38 50 63.5 38.1 115.9 81 M10 x 55 1.01 x ¾.375 x 1.050 1.50 1.97.50 1.50 4.56 3.19 ⅜ x ⅛. 50 x 5 60.3 x 33.4 38 47 63.5 38.1 115.9 81 M10 x 55 1.09 x 1.375 x 1.315 1.50 1.85.50 1.50 4.56 3.19 ⅜ x ⅛.40 50 x 3 60.3 x 4. [45] 5 73.0 38.1 115.9 84 M10 x 55 1.6 x 1¼.375 x 1.660 [1.75].05.87 1.50 4.56 3.31 ⅜ x ⅛.77 50 x 40 60.3 x 48.3 [45] 5 76. 38.1 115.9 84 M10 x 55 1.37 x 1½.375 x 1.900 [1.75].08 3.00 1.50 4.56 3.31 ⅜ x ⅛ 3.01 65 x 15 73.0 x 1.3 38 56 69.9 44.5 141.3 81 M1 x 60 1.0.5 x ½.875 x 0.840 1.50.0.75 1.75 5.56 3.19 ½ x ⅜.60 65 x 0 73.0 x 6.7 38 56 69.9 44.5 141.3 81 M1 x 60 1.0.5 x ¾.875 x 1.050 1.50.0.75 1.75 5.56 3.19 ½ x ⅜.70 65 x 5 73.0 x 33.4 38 53 69.9 44.5 141.3 81 M1 x 60 1.30.5 x 1.875 x 1.315 1.50.09.75 1.75 5.56 3.19 ½ x ⅜.86 65 x 3 73.0 x 4. 51 58 76. 44.5 141.3 94 M1 x 60 1.46.5 x 1¼.875 x 1.660.00.8 3.00 1.75 5.56 3.70 ½ x ⅜ 3.1 65 x 40 73.0 x 48.3 51 58 76. 44.5 141.3 94 M1 x 60 1.56.5 x 1½.875 x 1.900.00.8 3.00 1.75 5.56 3.70 ½ x ⅜ 3.43 76.1 x 1.3 38 56 69.9 46.1 144.5 81 M1 x 60 1.0 76.1 x 15. 3.000 x 0.840 1.50.0.75 1.81 5.69 3.19 ½ x ⅜.64 76.1 x 6.7 38 56 69.9 46.1 144.5 81 M1 x 60 1.0 76.1 x 0. 3.000 x 1.050 1.50.0.75 1.81 5.69 3.19 1/ x -3/8.64 76.1 x 33.4 38 53 69.9 46.1 144.5 81 M1 x 60 1.30 76.1 x 5. 3.000 x 1.315 1.50.09.75 1.81 5.69 3.19 ½ x ⅜.86 76.1 x 4. 51 58 76. 46.1 144.5 94 M1 x 60 1.46 76.1 x 3. 3.000 x 1.660.00.8 3.00 1.81 5.69 3.70 ½ x ⅜ 3.1 76.1 x 48.3 51 58 76. 46.1 144.5 94 M1 x 60 1.56 76.1 x 40. 3.000 x 1.900.00.8 3.00 1.81 5.69 3.70 ½ x ⅜ 3.43 80 x 15 88.9 x 1.3 38 60 77.8 53. 157. 81 M1 x 75 1.44 3 x ½ 3.500 x 0.840 1.50.36 3.06.09 6.19 3.19 ½ x 3 3.17 80 x 0 88.9 x 6.7 38 59 77.8 53. 157. 81 M1 x 75 1.46 3 x ¾ 3.500 x 1.050 1.50.3 3.06.09 6.19 3.19 ½ x 3 3.1 80 x 5 88.9 x 33.4 38 61 77.8 53. 157. 81 M1 x 75 1.53 3 x 1 3.500 x 1.315 1.50.40 3.06.09 6.19 3.19 ½ x 3 3.37 80 x 3 88.9 x 4. 51 65 8.6 53. 157. 94 M1 x 75 1.81 3 x 1¼ 3.500 x 1.660.00.56 3.5.09 6.19 3.70 ½ x 3 3.98 80 x 40 88.9 x 48.3 51 71 88.9 53. 157. 94 M1 x 75 1.88 3 x 1½ 3.500 x 1.900.00.80 3.50.09 6.19 3.70 ½ x 3 4.14 80 x 50 88.9 x 60.3 64 70 88.9 53. 157. 108 M1 x 75.07 3 x 3.500 x.375.50.76 3.50.09 6.19 4.5 ½ x 3 4.55 100 x 15 114.3 x 1.3 38 7 93.7 66.7 18.6 79.4 M1 x 75 1.63 4 x ½ 3.500 x 0.840 1.50.83 3.69.63 7.19 3.13 ½ x 3 3.59 100 x 0 114.3 x 6.7 38 71 93.7 66.7 18.6 79.4 M1 x 75 1.64 4 x ¾ 4.500 x 1.050 1.50.79 3.69.63 7.19 3.13 ½ x 3 3.61 100 x 5 114.3 x 33.4 38 73 93.7 66.7 18.6 79.4 M1 x 75 1.70 4 x 1 4.500 x 1.315 1.50.87 3.69.63 7.19 3.13 ½ x 3 3.74 100 x 3 114.3 x 4. 51 78 9.1 66.7 18.6 101.6 M1 x 75 1.90 4 x 1¼ 4.500 x 1.660.00 3.07 3.63.63 7.19 4.00 ½ x 3 4.18 100 x 40 114.3 x 48.3 51 84 9.1 66.7 18.6 101.6 M1 x 75.04 4 x 1½ 4.500 x 1.900.00 3.31 3.63.63 7.19 4.00 ½ x 3 4.49 1. Hole diameters listed are suggested hole saw diameters.. *T: Take-out (enter of run to end of pipe to be engaged) 3. Special caution is required to some exceptional hole sizes shown in [ ]. ontinued on next page 34 onnect with the est! opyright 011 Shurjoint

M1 & 771 MEHNIL TEES FEMLE THREDED OUTLET atalog 011 The Shurjoint Model M1 & 771 mechanical tees provides a fast and easy mid-pipe threaded branch outlet. Threads are NPT per NSI 1.0.1 or SPT per ISO 7. UL/FM working pressure is 0 bar (300 psi). T D ontinued from previous page Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 T* D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 100 x 50 114.3 x 60.3 64 83 101.6 66.7 18.6 101.6 M1 x 75.7 4 x 4.500 x.375.50 3.7 4.00.63 7.19 4.00 ½ x 3 5.00 100 x 65 114.3 x 73.0 70 73 101.6 66.7 18.6 11.7 M1 x 75.47 4 x ½ 4.500 x.875.75.87 4.00.63 7.19 4.44 ½ x 3 5.43 114.3 x 76.1 70 73 101.6 66.7 18.6 11.7 M1 x 75.57 100 x 76.1. 4.500 x 3.000.75.87 4.00.63 7.19 4.44 ½ x 3 5.65 100 x 80 114.3 x 88.9 89 84 104.8 66.7 18.6 18.6 M1 x 75.91 4 x 3 4.500 x 3.500 3.50 3.31 4.13.63 7.19 5.06 ½ x 3 6.41 139.7 x 60.3 64 83 10.7 81.0 3.8 106.4 M16 x 90.90 139.7 x 50. 5.500 x.375.50 3.7 4.75 3.19 8.81 4.19 ⅝ x 3½ 6.38 139.7 x 76.1 70 93 10.7 81.0 3.8 115.9 M16 x 90 3.40 139.7 x 76.1. 5.500 x 3.000.75 3.67 4.75 3.19 8.81 4.57 ⅝ x 3½ 7.40 139.7 x 88.9 89 97 17.0 81.0 3.8 131.8 M16 x 90 3.8 139.7 x 80. 5.500 x 3.500 3.50 3.8 4.75 3.19 8.81 5.19 ⅝ x 3½ 8.41 15 x 50 141.3 x 60.3 64 83 10.7 81.0 3.8 106.4 M16 x 90.90 5 x 5.563 x.375.50 3.7 4.75 3.19 8.81 4.19 ⅝ x 3½ 6.38 15 x 65 141.3 x 73.0 70 93 10.7 81.0 3.8 11.7 M16 x 90 3.39 5 x ½ 5.563 x.875.75 3.67 4.75 3.19 8.81 4.44 ⅝ x 3½ 7.46 15 x 80 141.3 x 88.9 89 97 17.0 81.0 3.8 131.8 M16 x 90 3.8 5 x 3 5.563 x 3.500 3.50 3.8 4.75 3.19 8.81 5.19 ⅝ x 3½ 8.40 165.1 x 4. 51 11 130. 94.5 50.8 9.1 M16 x 90.53 165.1 x 3. 6.500 x 1.660.00 4.41 5.13 3.7 9.87 3.63 ⅝ x 3½ 5.57 165.1 x 48.3 51 11 130. 94.5 50.8 9.1 M16 x 90 3.00 165.1 x 40. 6.500 x 1.900.00 4.41 5.13 3.7 9.87 3.63 ⅝ x 3½ 6.60 165.1 x 60.3 64 111 130. 94.5 50.8 106.4 M16 x 90 3.17 165.1 x 50. 6.500 x.375.50 4.37 5.13 3.7 9.87 4.19 ⅝ x 3½ 6.97 165.1 x 73.0 70 101 130. 94.5 50.8 11.7 M16 x 90 3.58 165.1 x 65. 6.500 x.875.75 3.98 5.13 3.7 9.87 4.44 ⅝ x 3½ 7.88 165.1 x 76.1 70 101 130. 94.5 50.8 115.9 M16 x 90 3.75 165.1 x 76.1. 6.500 x.875.75 3.98 5.13 3.7 9.87 4.56 ⅝ x 3½ 8.5 165.1 x 88.9 89 110 139.7 94.5 50.8 131.8 M16 x 90 4.13 165.1 x 80. 6.500 x 3.500 3.50 4.33 5.50 3.7 9.87 5.19 5/8 x 3-1/ 9.09 165.1 x 114.3 114 113 146.1 94.5 50.8 158.8 M16 x 90 4.77 165.1 x 100. 6.500 x 4.500 4.50 4.45 5.75 3.7 9.87 6.5 ⅝ x 3½ 10.50 150 x 3 168.3 x 4. 51 11 130. 94.5 50.8 9.1 M16 x 90.91 6 x 1¼ 6.65 x 1.660.00 4.41 5.13 3.7 9.87 3.63 ⅝ x 3½ 6.41 150 x 40 168.3 x 48.3 51 11 130. 94.5 50.8 9.1 M16 x 90.99 6 x 1½ 6.65 x 1.900.00 4.41 5.13 3.7 9.87 3.63 ⅝ x 3½ 6.58 150 x 50 168.3 x 60.3 64 111 130. 94.5 50.8 106.4 M16 x 90 3.18 6 x 6.65 x.375.50 4.37 5.13 3.7 9.87 4.19 ⅝ x 3½ 7.00 150 x 65 168.3 x 73.0 70 101 130. 94.5 50.8 11.7 M16 x 90 3.58 6 x ½ 6.65 x.875.75 3.98 5.13 3.7 9.87 4.44 ⅝ x 3½ 7.88 168.3 x 76.1 70 101 130. 94.5 50.8 115.9 M16 x 90 3.58 150 x 76.1. 6.65 x.875.75 3.98 5.13 3.7 9.87 4.56 ⅝ x 3½ 7.88 150 x 80 168.3 x 88.9 89 110 139.7 94.5 50.8 131.8 M16 x 90 4.10 6 x 3 6.65 x 3.500 3.50 4.33 5.50 3.7 9.87 5.19 ⅝ x 3½ 9.0 150 x 100 168.3 x 114.3 114 113 146.1 94.5 50.8 158.8 M16 x 90 4.76 6 x 4 6.65 x 4.500 4.50 4.45 5.75 3.7 9.87 6.5 ⅝ x 3½ 10.47 MODEL 771 Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 T* D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 00 x 50 19.1 x 60.3 [70] 135 166 10 37 101 M0 x 10 6. 8 x 8.65 x.375 [.75] 5.31 6.54 4.7 1.87 3.98 ¾ x 4¾ 13.6 00 x 65 19.1 x 73.0 70 137 166 10 37 104 M0 x 10 6. 8 x.5 8.65 x.875.75 5.39 6.54 4.7 1.87 4.09 ¾ x 4¾ 13.7 00 x 80 19.1 x 76.1 89 136 166 10 37 18 M0 x 10 7.1 8 x 3 8.65 x 3.000 3.50 5.35 6.54 4.7 1.87 5.04 ¾ x 4¾ 15.6 00 x 100 19.1 x 114.3 114 133 166 10 37 164 M0 x 10 8.0 8 x 4 8.65 x 4.500 4.50 5.4 6.54 4.7 1.87 6.46 ¾ x 4¾ 17.6 1. Hole diameters listed are suggested hole saw diameters.. *T: Take-out (enter of run to end of pipe to be engaged) 3. Special caution is required to some exceptional hole sizes shown in [ ]. onnect with the est! 35 opyright 011 Shurjoint

M MEHNIL TEE GROOVED-END OUTLET atalog 011 The groove dimensions conform to WW 606. UL/FM working pressure is 0 bar (300 psi). The Model 77 is available in 8" sizes. D Working Pressure (STD, Roll-grooved) Max. Service Temperature.. 300 psi @100 F EPDM: 30 F / 110 lass 150 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 x 5 60.3 x 33.4 38 73.0 38.1 115.9 81.0 M10 x 55 1.03 x 1.375 x 1.315 1.50.87 1.50 4.57 3.19 ⅜ x ⅛.7 50 x 3 60.3 x 4. [45] 76. 38.1 115.9 84.0 M10 x 55 1.11 x 1¼.375 x 1.660 [1.75] 3.00 1.50 4.57 3.31 ⅜ x ⅛.44 50 x 40 60.3 x 48.3 [45] 76. 38.1 115.9 84.0 M10 x 55 1.18 x 1½.375 x 1.900 [1.75] 3.00 1.50 4.57 3.31 ⅜ x ⅛.60 65 x 5 73.0 x 33.4 38 79.4 44.5 141.3 81.0 M1 x 60 1.3 ½ x 1.875 x 1.315 1.50 3.13 1.75 5.56 3.19 ⅜ x ⅜.71 65 x 3 73.0 x 4. 51 8.6 44.5 141.3 94.0 M1 x 60 1.39 ½ x 1¼.875 x 1.660.00 3.5 1.75 5.56 3.70 ⅜ x ⅜ 3.06 65 x 40 73.0 x 48.3 51 8.6 44.5 141.3 94.0 M1 x 60 1.4 ½ x 1½.875 x 1.900.00 3.5 1.75 5.56 3.70 ⅜ x ⅜ 3.1 76.1 x 33.4 38 79.4 46.1 144.5 81.0 M1 x 60 1.3 76.1 x 5.. 3.000 x 1.315 1.50 3.13 1.81 5.69 3.19 ½ x ⅜.71 76.1 x 4. 51 8.6 46.1 144.5 94.0 M1 x 60 1.39 76.1 x 3.. 3.000 x 1.660.00 3.5 1.81 5.69 3.70 ½ x ⅜ 3.06 76.1 x 48.3 51 8.6 46.1 144.5 94.0 M1 x 60 1.4 76.1 x 40.. 3.000 x 1.900.00 3.5 1.81 5.69 3.70 ½ x ⅜ 3.1 80 x 5 88.9 x 33.4 38 85.7 53. 157. 81.0 M1 x 75 1.45 3 x 1 3.500 x 1.315 1.50 3.37.09 6.19 3.19 ½ x 3 3.19 80 x 3 88.9 x 4. 51 90.5 53. 157. 94.0 M1 x 75 1.68 3 x 1¼ 3.500 x 1.660.00 3.56.09 6.19 3.70 ½ x 3 3.70 80 x 40 88.9 x 48.3 51 90.5 53. 157. 94.0 M1 x 75 1.70 3 x 1½ 3.500 x 1.900.00 3.56.09 6.19 3.70 ½ x 3 3.74 80 x 50 88.9 x 60.3 64 90.5 53. 157. 108.0 M1 x 75 1.83 3 x 3.500 x.375.50 3.56.09 6.19 4.5 ½ x 3 4.03 100 x 5 114.3 x 33.4 38 93.7 66.7 18.6 79.4 M1 x 75 1.65 4 x 1 4.500 x 1.315 1.50 3.69.63 7.19 3.13 ½ x 3 3.63 100 x 3 114.3 x 4. 51 9.1 66.7 18.6 101.6 M1 x 75 1.80 4 x 1¼ 4.500 x 1,660.00 3.63.63 7.19 4.00 ½ x 3 3.96 100 x 40 114.3 x 48.3 51 9.1 66.7 18.6 101.6 M1 x 75 1.81 4 x 1½ 4.500 x 1.900.00 3.63.63 7.19 4.00 ½ x 3 3.98 100 x 50 114.3 x 60.3 64 101.6 66.7 18.6 101.6 M1 x 75 1.93 4 x 4.500 x.375.50 4.00.63 7.19 4.00 ½ x 3 4.5 100 x 65 114.3 x 73.0 70 101.6 66.7 18.6 11.7 M1 x 75.66 4 x ½ 4.500 x.875.75 4.00.63 7.19 4.44 ½ x 3 5.85 114.3 x 76.1 70 101.6 66.7 18.6 11.7 M1 x 75.17 100 x 76.1.. 4.500 x 3.000.75 4.00.63 7.19 4.44 ½ x 3 4.78 100 x 80 114.3 x 88.9 89 104.8 66.7 18.6 18.6 M1 x 75.41 4 x 3 4.500 x 3.500 3.50 4.13.63 7.19 5.06 ½ x 3 5.30 139.7 x 60.3 64 10.7 81.0 3.8 106.4 M16 x 90.63 139.7 x 50.. 5.500 x.375.50 4.75 3.19 8.81 4.19 ⅝ x 3½ 5.79 139.7 x 76.1 70 10.7 81.0 3.8 11.7 M16 x 90.95 139.7 x 76.1.. 5.500 x 3.000.75 4.75 3.19 8.81 4.44 ⅝ x 3½ 6.50 139.7 x 88.9 70 117.5 81.0 3.8 131.8 M16 x 90 3.08 139.7 x 80.. 5.500 x 3.500.75 4.63 3.19 8.81 5.19 ⅝ x 3½ 6.78 15 x 50 141.3 x 60.3 64 10.7 81.0 3.8 106.4 M16 x 90.63 5 x 5.563 x.375.50 4.75 3.19 8.81 4.19 ⅝ x 3½ 5.79 15 x 65 141.3 x 73.0 70 10.7 81.0 3.8 11.7 M16 x 90.88 5 x ½ 5.563x.875.75 4.75 3.19 8.81 4.44 ⅝ x 3½ 6.34 141.3 x 76.1 70 10.7 81.0 3.8 11.7 M16 x 90.95 15 x 76.1.. 5.563x 3.000.75 4.75 3.19 8.81 4.44 ⅝ x 3½ 6.49 15 x 80 141.3 x 88.9 70 117.5 81.0 3.8 131.8 M16 x 90 3.08 5 x 3 5.563 x 3.500.75 4.63 3.19 8.81 5.19 ⅝ x 3½ 6.78 1. Hole diameters listed are suggested hole saw diameters.. Special caution is required to some exceptional hole sizes shown in [ ]. 36 onnect with the est! opyright 011 Shurjoint ontinued on next page

M & 77 MEHNIL TEE GROOVED-END OUTLET atalog 011 The groove dimensions conform to WW 606. UL/FM working pressure is 0 bar (300 psi). The Model 77 is available in 8" sizes. D ontinued from previous page (Model M) Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 165.1 x 4. 51 130. 94.5 50.8 9.1 M16 x 90.74 165.1 x 3.. 6.500 x 1.660.00 5.13 3.7 9.87 3.63 ⅝ x 3½ 6.03 165.1 x 48.3 51 130. 94.5 50.8 9.1 M16 x 90.78 165.1 x 40.. 6.500 x 1.900.00 5.13 3.7 9.87 3.63 ⅝ x 3½ 6.1 165.1 x 60.3 64 130. 94.5 50.8 106.4 M16 x 90.91 165.1 x 50.. 6.500 x.375.50 5.13 3.7 9.87 4.19 ⅝ x 3½ 6.40 165.1 x 76.1 70 130. 94.5 50.8 115.9 M16 x 90 3.38 165.1 x 76.1.. 6.500 x 3.000.75 5.13 3.7 9.87 4.56 ⅝ x 3½ 7.44 165.1 x 88.9 89 130. 94.5 50.8 131.8 M16 x 90 3.64 165.1 x 80.. 6.500 x 3.500 3.50 5.13 3.7 9.87 5.19 ⅝ x 3½ 8.01 165.1 x 114.3 114 137.1 94.5 50.8 158.8 M16 x 90 4.05 165.1 x 100.. 6.500 x 4.500 4.50 5.40 3.7 9.87 6.5 ⅝ x 3½ 8.91 150 x 3 168.3 x 4. 51 130. 94.5 50.8 9.1 M16 x 90.75 6 x 1¼ 6.65 x 1.660.00 5.13 3.7 9.87 3.63 5/8 x 3½ 6.05 150 x 40 168.3 x 48.3 51 130. 94.5 50.8 9.1 M16 x 90.78 6 x 1½ 6.65 x 1.900.00 5.13 3.7 9.87 3.63 ⅝ x 3½ 6.1 150 x 50 168.3 x 60.3 64 130. 94.5 50.8 106.4 M16 x 90.9 6 x 6.65 x.375.50 5.13 3.7 9.87 4.19 ⅝ x 3½ 6.4 150 x 65 168.3 x 73.0 70 130. 94.5 50.8 11.7 M16 x 90 3. 6 x ½ 6.65 x.875.75 5.13 3.7 9.87 4.44 ⅝ x 3½ 7.08 150 x 80 168.3 x 88.9 89 130. 94.5 50.8 131.8 M16 x 90 3.68 6 x 3 6.65 x 3.500 3.50 5.13 3.7 9.87 5.19 ⅝ x 3½ 8.10 150 x 100 168.3 x 114.3 114 137.1 94.5 50.8 158.8 M16 x 90 4.05 6 x 4 6.65 x 4.500 4.50 5.40 3.7 9.87 6.5 ⅝ x 3½ 8.91 MODEL 77 Nominal Size Pipe Hole Dia. Dimensions olt Run x ranch O. D. +3., -0 / +0.13, -0 D Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 00 x 50 19.1 x 60.3 [70] 166 10 37 104 M0 x 10 5.8 8 x 8.65 x.375 [.75] 6.54 4.7 1.87 3.89 ¾ x 4¾ 1.8 00 x 65 19.1 x 73.0 70 166 10 37 104 M0 x 10 6.0 8 x ½ 8.65 x.875.75 6.54 4.7 1.87 4.09 ¾ x 4¾ 13. 19.1 x 76.1 70 166 10 37 104 M0 x 10 6.0 00 x 76.1.. 8.65 x 3.000.75 6.54 4.7 1.87 4.09 ¾ x 4¾ 13. 00 x 80 19.1 x 88.9 89 166 10 37 18 M0 x 10 7. 8 x 3 8.65 x 3.500 3.50 6.54 4.7 1.87 5.04 ¾ x 4¾ 15.8 00 x 100 19.1 x 114.3 114 166 10 37 164 M0 x 10 7.5 8 x 4 8.65 x 4.500 4.50 6.54 4.7 1.87 6.46 ¾ x 4¾ 16.5 1. Hole diameters listed are suggested hole saw diameters.. Special caution is required to some exceptional hole sizes shown in [ ]. onnect with the est! 37 opyright 011 Shurjoint

73 SDDLE-LET Small Mechanical Tee atalog 011 The Model 73 Saddle-Let is the ideal outlet fitting for making direct connections to sprinkler heads, drop nipples and or gauges. No need for welding, just cut or drill a hole at the desired outlet location. Working Pressure Max. Service (STD, Roll-grooved) Temperature.. 300 psi @100 F EPDM: 30 F / 110 lass 150 0 ar @38 Nitrile: 180 F / 8 *Working pressure is based on standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. T Nominal Hole Dia. Dimensions Take-Out, olt olt Size +1.6, -0 / +0.063, -0 T Size Torque Weight mm / in mm / in mm / in mm / in mm / in mm / in in N-m / Lb-Ft Kgs / Lbs 3 x 15 30 53.0 89.0 56.0 35.0 3/8Ø 0-30 0.4 1¼ x ½ 1.18.08 3.50.0 1.38 U-olt 15-0.9 3 x 0 30 53.0 89.0 56.0 35.0 3/8Ø 0-30 0.4 1¼ x ¾ 1.18.08 3.50.0 1.38 U-olt 15-0.9 3 x 5 30 56.0 89.0 56.0 38.0 3/8Ø 0-30 0.4 1¼ x 1 1.18.0 3.50.0 1.50 U-olt 15-0.9 40 x 15 30 55.0 89.0 56.0 35.0 3/8Ø 0-30 0.4 1½ x ½ 1.18.16 3.50.0 1.38 U-olt 15-0.9 40 x 0 30 55.0 89.0 56.0 35.0 3/8Ø 0-30 0.4 1½ x ¾ 1.18.16 3.50.0 1.38 U-olt 15-0.9 40 x 5 30 58.0 89.0 56.0 38.0 3/8Ø 0-30 0.4 1½ x 1 1.18.8 3.50.0 1.50 U-olt 15-0.9 50 x 15 30 64.0 98.0 56.0 4.0 3/8Ø 0-30 0.4 x ½ 1.18.51 3.85.0 1.65 U-olt 15-0.9 50 x 0 30 64.0 98.0 56.0 4.0 3/8Ø 0-30 0.4 x ¾ 1.18.51 3.85.0 1.65 U-olt 15-0.9 50 x 5 30 67.0 98.0 56.0 45.0 3/8Ø 0-30 0.4 x 1 1.18.63 3.85.0 1.77 U-olt 15-0.9 65 x 15 30 69.0 111.0 56.0 51.0 3/8Ø 0-30 0.4 ½ x ½ 1.18.71 4.37.0.00 U-olt 15-0.9 65 x 0 30 69.0 111.0 56.0 51.0 3/8Ø 0-30 0.4 ½ x ¾ 1.18.71 4.37.0.00 U-olt 15-0.9 65 x 5 30 7.0 111.0 56.0 54.0 3/8Ø 0-30 0.5 ½ x 1 1.18.83 4.37.0.13 U-olt 15-1.1 1. Hole diameters listed are suggested hole saw diameters.. *T: Take-out (enter of run to end of pipe to be engaged) Hole utting The method of pipe preparation requires the cutting or drilling of a specified hole size on the centerline of the pipe. lways use the correct hole saw size as shown in the table and never use a torch for cutting a hole. fter the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole should be inspected to ensure a clean smooth surface, free of any indentations or projections that could affect proper gasket sealing. Hole Sizes for 73 Saddle-let unit: mm/in Hole Dimensions Surface Saddle- Let Hole Saw Max dia. Preparation ranch Size Size llowed 15, 0, 5 30 3 89 ½, ¾, 1 1 13 /16 1¼ 3½ 16mm ( ⅝" ) 38 onnect with the est! opyright 011 Shurjoint

Performance Data Sheet - Ductile Iron ouplings on arbon Steel & Stainless Steel Pipe atalog 011 The following tables show maximum working pressures (WP) of Shurjoint ductile iron couplings and flange adapters used on both carbon steel and stainless steel pipes. Shurjoint ductile iron unit: psi Model Z05 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1¼ 600 600 500 400 50 1½ 600 600 500 400 50 600 600 500 400 50 ½ 600 600 500 400 50 3 600 600 500 400 50 4 600 600 500 400 00 5 450 450 350 300 175 6 450 450 350 300 175 8 450 450 350 300 150 couplings can be used in conjunction with stainless steel pipe in non-corrosive environment as the flow media does not come in direct contact with the coupling housings but rather only the gasket. unit: psi Model Z05 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1¼ 600 600 450 300 50 1½ 600 600 450 300 50 600 600 450 300 50 ½ 600 600 450 300 50 3 600 600 450 300 50 4 600 600 450 300 00 5 450 450 300 00 NR 6 450 450 300 15 NR 8 450 450 300 100 NR Model Z07 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1¼ 750 750 750 600 400 1½ 750 750 750 600 400 750 750 750 600 400 ½ 750 750 750 600 400 3 750 750 750 600 400 4 750 750 750 600 400 5 750 750 750 500 350 6 700 700 700 400 300 8 600 600 600 350 50 10 500 500 500 300 00 1 400 400 400 50 150 Model Z07 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1¼ 750 750 700 500 300 1½ 750 750 700 500 300 750 750 700 500 300 ½ 750 750 700 500 300 3 750 750 700 500 300 4 750 750 700 400 50 5 750 750 600 300 NR 6 700 700 500 00 NR 8 600 600 400 150 NR 10 500 500 300 100 NR 1 400 400 50 100 NR Model XH-1000 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1500 1000 1000 750 NR ½ 1500 1000 1000 600 NR 3 1500 1000 1000 600 NR 4 1500 1000 1000 600 NR 6 1500 1000 1000 450 NR 8 900 800 800 300 NR 10 900 800 800 300 NR 1 900 800 800 00 NR Model 7705 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1 600 600 500 400 300 1¼ 600 600 500 400 300 1½ 600 600 500 400 300 600 600 500 400 300 ½ 600 600 500 400 300 3 600 600 500 400 300 4 600 600 500 400 300 5 450 450 450 350 50 6 450 450 450 350 50 8 450 450 300 50 00 10 350 350 300 00 175 1 350 350 300 00 175 Model 7707 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 ¾ 1000 1000 750 600 500 1 1000 1000 750 600 500 1¼ 1000 1000 750 600 500 1½ 1000 1000 750 600 500 1000 1000 750 600 500 ½ 1000 1000 750 600 500 3 1000 1000 750 600 500 4 1000 1000 750 600 400 5 1000 1000 750 500 350 6 1000 1000 700 450 300 8 800 800 600 350 50 10 800 800 550 300 00 1 800 800 500 300 00 Model XH-1000 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1500 1000 750 500 NR ½ 1500 1000 750 500 NR 3 1500 1000 750 500 NR 4 1500 1000 750 400 NR 6 1500 1000 500 00 NR 8 900 800 400 15 NR 10 900 800 400 15 NR 1 900 800 400 15 NR Model 7705 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1 600 600 450 300 50 1¼ 600 600 450 300 50 1½ 600 600 450 300 50 600 600 450 300 50 ½ 600 600 450 300 50 3 600 600 450 300 50 4 600 600 450 300 00 5 450 450 300 00 NR 6 450 450 300 15 NR 8 450 450 300 100 NR 10 350 350 00 NR NR 1 350 350 00 NR NR Model 7707 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S ¾ 750 750 700 450 35 1 750 750 700 450 35 1¼ 750 750 700 450 35 1½ 750 750 700 450 35 750 750 700 450 35 ½ 750 750 700 450 35 3 750 750 700 450 35 4 750 750 700 400 50 5 750 750 600 300 NR 6 750 750 500 00 NR 8 600 600 450 150 NR 10 600 600 400 15 NR 1 600 600 400 15 NR onnect with the est! 39 opyright 011 Shurjoint

atalog 011 unit: psi Model M-7 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 500 500 500 350 300 ½ 500 500 500 350 300 3 500 500 500 350 300 4 500 500 500 350 300 5 400 400 400 350 50 6 400 400 400 350 50 unit: psi Model M-7 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 500 500 450 300 50 ½ 500 500 450 300 50 3 500 500 450 300 50 4 500 500 450 300 00 5 400 400 300 00 NR 6 400 400 300 15 NR Model 7706 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1½ x 1¼ 500 500 500 350 300 x '1½ 500 500 500 350 300 ½ x 500 500 500 350 300 3 x 500 500 500 350 300 3 x '½ 500 500 500 350 300 4 x 500 500 500 350 300 4 x '½ 500 500 500 350 300 4 x 3 500 500 500 300 50 5 x 4 400 400 400 300 50 6 x 3 400 400 400 300 00 6 x 4 400 400 400 300 175 8 x 6 400 400 400 300 175 Model G8 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1½ 300 300 300 300 NR 300 300 300 300 NR ½ 300 300 300 300 NR 3 300 300 300 300 NR 4 300 300 300 300 NR 5 300 300 300 300 NR 6 300 300 300 300 NR 8 300 300 300 50 NR 10 300 300 300 50 NR 1 300 300 300 50 NR Model 7706 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1½ x 1¼ 500 500 350 300 50 x '1½ 500 500 350 300 50 ½ x 500 500 350 300 50 3 x 500 500 350 300 50 3 x '½ 500 500 350 300 50 4 x 500 500 350 300 50 4 x '½ 500 500 350 300 00 4 x 3 500 500 300 50 00 5 x 4 400 400 300 50 NR 6 x 3 400 400 300 00 NR 6 x 4 400 400 300 175 NR 8 x 6 400 400 300 175 NR Model G8 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S '1½ 300 300 300 300 NR 300 300 300 300 NR.5 300 300 300 300 NR 3 300 300 300 300 NR 4 300 300 300 175 NR 5 300 300 50 150 NR 6 300 300 50 150 NR 8 300 300 00 NR NR 10 300 300 00 NR NR 1 300 300 00 NR NR Model -7 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 1½ x * 500 500 500 350 300 x * 500 500 500 350 300 ½ x * 500 500 500 350 300 3 x * 500 500 500 350 300 4 x * 500 500 500 350 300 6 x * 400 400 400 350 300 Model -7 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 1½ x * 500 500 350 300 50 x * 500 500 350 300 50 ½ x * 500 500 350 300 50 3 x * 500 500 350 300 50 4 x * 500 500 350 300 50 6 x * 400 400 300 300 50 * = all branch sizes, threaded and grooved.. * = all branch sizes, threaded and grooved.. Model 7041 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 300 300 300 50 NR ½ 300 300 300 50 NR 3 300 300 300 50 NR 4 300 300 300 50 NR 5 300 300 300 50 NR 6 300 300 300 50 NR 8 300 300 300 00 NR 10 300 300 300 00 NR 1 300 300 300 00 NR 14 300 300 300 00 NR 16 300 300 300 175 NR 18 300 300 300 175 NR 0 300 300 300 150 NR 4 300 300 300 150 NR Hydrostatic shell test: 450 psi (30 ar) per NSI 16.5 Model 7043 on arbon Steel Pipe Size ut-grooved Roll-Grooved in XS STD STD Sch. 10 Sch. 7 750 750 750 500 NR ½ 750 750 750 500 NR 3 750 750 750 500 NR 4 750 750 750 500 NR 5 750 750 750 450 NR 6 750 750 750 450 NR 8 750 750 750 300 NR 10 750 750 750 300 NR 1 750 750 750 50 NR Hydrostatic shell test: 115 psi (77 ar) per NSI 16.5 Model 7041 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 300 300 75 75 175 ½ 300 300 75 75 175 3 300 300 75 75 175 4 300 300 75 75 175 5 300 300 75 00 175 6 300 300 50 00 15 8 300 300 00 NR NR 10 300 300 00 NR NR 1 300 300 00 NR NR 14 50 50 15 NR NR 16 50 50 15 NR NR 18 50 50 15 NR NR 0 50 50 100 NR NR 4 50 50 100 NR NR Model 7043 on Stainless Steel Pipe Size ut-grooved Roll-Grooved in Sch. 80S Sch. 40S Sch. 40S Sch. 10S Sch. 5S 400 400 400 NR NR ½ 400 400 400 NR NR 3 400 400 400 NR NR 4 300 300 300 NR NR 5 300 300 50 NR NR 6 300 300 00 NR NR 8 50 50 150 NR NR 10 50 50 150 NR NR 1 50 50 150 NR NR 40 onnect with the est! opyright 011 Shurjoint

Section ast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 4 Flow Data / Friction Resistance... 4 Ductile Iron Grooved Fittings 7110 / 7111 / 711 / 7113 Elbows... 43 710 / 7135 / 7130 Tee, ross, Lateral... 44 711 Reducing Tee... 45 7150 / 7151 oncentric & Eccentric Reducers... 46 7160 / 7160T / 7160H / 7160P aps... 47 7110LR / 7111LR / 7137 / 711G / 7110- Elbows & True-Y... 48 901 / 903 / 7110DR / 717 Elbows & Tee... 49 715 / 7150F / 7150M ullhead Tee & Reducers... 50 899 / 55 / 56 End-ll & Nipples... 51 850 / 851 / 853 Sprinkler Hubs... 5 7114 / 71 / 7133 Hydrant Elbow & Tees... 53 Wrought Grooved Fittings W110 / W110LR / W111LR / W10 / W160 / W11 Elbows & Tee..54 W150 / W151 / 57 / 58 / 59 oncentric & Eccentric Reducers, Nipples... 55 L90-3D / L60-3D / L45-3D / L30-3D / L-3D / L11-3D Elbows... 56 L90-5D / L60-5D / L45-5D / L30-5D / L-5D / L11-5D Elbows... 57 L90-6D / L60-6D / L45-6D / L30-6D / L-6D / L11-6D Elbows... 57 Extra Heavy Grooved Fittings 10EP / 11EP / 0EP / 35EP / EP Elbows, Tees & ross... 58 onnect with the est! atalog 011

Shurjoint Grooved Fittings atalog 011 Shurjoint offers a wide range of grooved-end fittings in sizes through 4 (600mm). Fittings are available in a number of styles and configurations to support a variety of applications. Shurjoint grooved-end fittings are manufactured and designed to meet STM F1548 and NSI/WW 606 requirements for use with grooved mechanical couplings conforming to STM F1476. For sizes not specified in these standards, please refer to applicable groove specifications shown in this catalog. Size Nom. Working Pressure Max. Service Rating (STD, Roll-grooved) Temperature 1 6 750 psi @100 F lass 300 (5 150).. 5 ar @38 EPDM: 8 1 400 psi @100 F 30 F / 110 lass 50 (00 300).. 8 ar @38 Nitrile: 14 4 300 psi @100 F 180 F / 8 lass 150 (50 600).. 0 ar @38 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Most fittings are provided in ductile iron conforming to STM 536 Gr. 65-45-1 and or STM 395 Gr. 65-45-15. Some styles and sizes larger than 14 (350mm) are fabricated from carbon steel pipe to STM 53 Gr. or fabricated of segmentally welded steel of the same or equivalent grade. Fittings are painted orange or red, or as an option can be supplied hot-dip galvanized or epoxy coated. Rubber Lined Fittings Shurjoint ductile iron grooved end fittings are also available with rubber lining for abrasive services. ontact Shurjoint for further information. For abrasive services For abrasive and corrosive services Flow Data / Frictional Resistance Expressed as equivalent length of straight pipe Elbows Tees Nominal Pipe Pipe Wall #7110 90 #901 90 #7110LR 90 #7111 45 #7111LR 45 #710 #903 Size O.D. Thickness Std. Radius Short. Radius 1½ D. LR Std. Radius 1½ D. LR ranch ranch mm / in mm / in mm / in meters / feet meters / feet meters / feet meters / feet meters / feet meters / feet meters / feet 5 33.4 3.4 0.5 --- --- 0. --- 1.3 --- 1 1.315 0.133 1.7 --- --- 0.8 --- 4. --- 3 4. 3.6 0.8 0.8 --- 0.3 --- 1.4 1.4 1¼ 1.660 0.140.5.5 --- 1.0 --- 4.7 4.7 40 48.3 40 1.1 1.1 --- 0.5 ---.0.0 1½ 1.900 0.154 3.5 3.5 --- 1.5 --- 6.5 6.5 50 60.3 5. 1. 1. 0.8 0.5 0.3.6.6.375 0.03 4.0 4.0.5 1.7 1.1 8.5 8.5 65 73.0 5.0 1.4 1.4 0.9 0.6 0.4 3.1 3.1 ½.875 0.197 4.5 4.5.9.0 1.4 10.0 10.0 80 88.9 6.3 1.5 1.5 1. 0.8 0.5 3.7 3.7 3 3.500 0.37 5.0 5.0 3.8.5 1.5 1.0 1.0 100 114.3 5.6.0.0 1.5 0.9 0.6 4.6 4.6 4 4.500 0.0 6.7 6.7 5.0 3.0.1 15.0 15.0 15 141.3 6.6.3.3 1.8 1. 0.6 5.8 5.8 5 5.563 0.58 7.5 7.5 6.0 4.0.5 19.0 19.0 150 168.3 7.1.7.7.3 1.4 0.9 6.7 6.7 6 6.65 0.80 9.0 9.0 7.5 4.5 3.0.0.0 00 19.1 8. 4.0 4.0 3.0.0 1. 10.1 10.1 8 8.65 0.3 13.0 13.0 9.8 6.5 4.0 33.0 33.0 50 73.0 8.8 5. --- 3.7.5 1.5 1.5 --- 10 10.750 0.365 17.0 --- 1.0 8.3 5.0 41.0 --- 300 33.9 9.5 6.1 --- 4.4 3.1 1.8 14.9 --- 1 1.750 0.375 0.0 --- 14.5 10.0 6.0 49.0 --- The values listed in this table express the frictional resistance of representative Shurjoint fittings as equivalent feet (meters) of straight pipe. For the branch of a tee that is reduced in size, use the value that corresponds to the branch size. For example, the branch value of a 4 x 4 x 3 tee is 1.8 feet (3.9 meters). For fittings not listed in this table, the equivalent length of straight pipe can be estimated from the data provided. For example, the flow resistance of a ½ elbow is approximately one half that of a 45 elbow. 4 onnect with the est! opyright 011 Shurjoint

MODEL 7110 90 elbow 7111 45 elbow 711 -½ elbow 7113 11-¼ elbow atalog 011 Shurjoint ductile iron grooved-end fittings are made of ductile iron per STM 536 Gr. 65-45-1 and or STM 395 Gr. 65-45- 15. dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings. 7110 90 Elbow 7111 45 Elbow 711 ½ Elbow 7113 11¼ Elbow Nominal Pipe #7110 90 Elbow #7111 45 Elbow #711 ½ Elbow #7113 11¼ Elbow Size O. D. - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 5 33.4 57 0.3 45 0. --- --- --- --- 1 1.315.5 0.7 1.75 0.5 --- --- --- --- 3 4. 70 0.5 45 0.3 --- --- --- --- 1¼ 1.660.75 1.1 1.75 0.7 --- --- --- --- 40 48.3 70 0.6 45 0.4 45 0.6 --- --- 1½ 1.900.75 1.3 1.75 0.9 1.75 1.3 --- --- 50 60.3 83 0.9 51 0.7 48 0.8 35 0.4.375 3.5.0.00 1.5 1.88 1.8 1.38 1.0 65 73.0 95 1. 57 0.9 51 1.0 38 0.7 ½.875 3.75.6.5.0.01. 1.50 1.6 76.1 95 1.4 57 0.9 51 1.0 38 0.8 76.1mm.. 3.000 3.75 3.1.5.1.01. 1.50 1.7 80 88.9 108.0 64 1.3 57 1.4 38 0.8 3 3.500 4.5 4.3.50.9.5 3.1 1.50 1.8 101.6 114.5 --- --- --- --- --- --- 101.6mm.. 4.000 4.50 5.6 --- --- --- --- --- --- 100 114.3 17 3.1 76.0 73.0 45 1.0 4 4.500 5.00 6.9 3.00 4.4.88 4.4 1.75. 108.0 17.5 76.0 --- --- --- --- 108.0mm.. 4.50 5.00 5.5 3.00 4.4 --- --- --- --- 15 141.3 140 5.0 83 3.0 73 3.1 --- --- 5 5.563 5.50 11.0 3.5 6.6.88 6.8 --- --- 133.0 140 4.1 83.7 --- --- --- --- 133.0mm.. 5.50 5.50 9.0 3.5 5.9 --- --- --- --- 139.7 140 4.3 83.9 73.9 --- --- 139.7mm.. 5.500 5.50 9.5 3.5 6.4.88 6.5 --- --- 150 168.3 165 5.8 89 4.0 79 5.0 51.5 6 6.65 6.50 1.8 3.50 8.9 3.1 11.0.00 5.5 159.0 165 6.0 89 3.8 --- --- --- --- 159.0mm.. 6.50 6.50 13. 3.50 8.4 --- --- --- --- 165.1 165 5.7 89 4.0 79 5.0 51.5 165.1mm.. 6.500 6.50 1.5 3.50 8.9 3.1 11.0.00 5.5 00 19.1 197 13.0 108 8.6 98 10.0 51 5.5 8 8.65 7.75 8.7 4.5 19.0 3.88.0.00 1.1 50 73.0 9 4.1 11 15.5 111 17.7 54 10.0 10 10.750 9.00 53.1 4.75 34. 4.38 38.9.13.1 300 33.9 54 36.7 133.5 --- 19.5 57 1.4 1 1.750 10.00 81.0 5.5 49.5 --- 4.9.5 7.3 16.3 197 1.4 108 8.4 98 10.0 --- --- 00JIS.. 8.516 7.75 7. 4.5 18.5 3.88.0 --- --- 67.4 9 4.0 11 15.5 111 17.7 54 10.0 50JIS.. 10.58 9.00 5.8 4.75 34. 4.38 38.9.13.1 318.5 54 35.0 133.5 --- --- 57 1.4 300JIS.. 1.539 10.00 77.0 5.5 49.5 --- ---.5 7.3 350 355.6 80 35.1 15.0 --- 1.0 --- --- 14 14.000 11.00 77.5 6.00 48.4 --- 46. --- --- 400 406.4 305 43.0 184 44.0 ---.0 --- --- 16 16.000 1.00 94.6 7.5 96.8 --- 48.4 --- --- 450 457. 394 83.5 03 46.6 --- --- --- --- 18 18.000 15.50 184.0 8.00 10.5 --- --- --- --- 500 508.0 438 118.5 9 54.5 --- --- --- --- 0 0.000 17.5 61. 9.00 10. --- --- --- --- 600 609.6 508 185.0 80 83.5 --- --- --- --- 4 4.000 0.00 407.9 11.00 184.1 --- --- --- --- onnect with the est! 43 opyright 011 Shurjoint

710 tee 7135 cross 7130 45 lateral atalog 011 Shurjoint ductile iron grooved-end fittings are made of ductile iron per STM 536 Gr. 65-45-1 and or STM 395 Gr. 65-45- 15. dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings. -LE -SE -LE 710 Tee 7135 ross 7130 45 Lateral Nominal Pipe #710 Tee #7135 ross #7130 45 Lateral Size O. D. - E Weight - E Weight - LE - SE Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in mm / in Kgs / Lbs 5 33.4 57 0.4 --- --- --- --- --- 1 1.315.5 0.9 --- --- --- --- --- 3 4. 70 0.7 --- --- --- --- --- 1¼ 1.660.75 1.5 --- --- --- --- --- 40 48.3 70 0.9 --- --- --- --- --- 1½ 1.900.75.0 --- --- --- --- --- 50 60.3 83 1.3 83 1. 178 70.0.375 3.5.9 3.5.7 7.00.75 4.4 65 73.0 95. 95 3.0 197 76.8 ½.875 3.75 4.8 3.75 6.7 7.75 3.00 6. 76.1 95.3 95 3.0 197 76.8 76.1mm.. 3.000 3.75 5.1 3.75 6.7 7.75 3.00 6. 80 88.9 108 3.1 108 3.1 16 83 4. 3 3.500 4.5 6.8 4.5 6.8 8.50 3.5 9. 100 114.3 17 4.5 17 5. 67 95 8.0 4 4.500 5.00 9.9 5.00 11.5 10.50 3.75 17.6 108.0 17 4.1 --- --- --- --- --- 108.0mm.. 4.50 5.00 9.0 --- --- --- --- --- 15 141.3 140 6.5 140 5.9 318 10 1.5 5 5.563 5.50 14.3 5.50 13.0 1.50 4.00 7.5 133.0 140 6.0 --- --- --- --- --- 133.0mm.. 5.50 5.50 13. --- --- --- --- --- 139.7 140 6.5 140 5.9 318 10 1.5 139.7mm.. 5.500 5.50 14.3 5.50 13.0 1.50 4.00 7.5 150 168.3 165 10.0 165 14.5 356 114 18.5 6 6.65 6.50.0 6.50 3.0 14.00 4.50 40.7 150 159.0 165 8.6 --- --- --- --- --- 6 6.50 6.50 18.9 --- --- --- --- --- 165.1 165 9.4 165 14.5 356 114 18.5 165.1mm.. 6.500 6.50 0.8 6.50 3.0 14.00 4.50 40.7 00 19.1 197 0.0 197 0.0 457 15 3.0 8 8.65 7.75 44.0 7.75 44.1 18.00 6.00 70.4 50 73.0 9 31.0 --- --- 51 165 63.0 10 10.750 9.00 68. --- --- 0.50 6.50 138.9 300 33.9 54 43.9 --- --- 584 178 91.5 1 1.750 10.00 96.7 --- --- 3.00 7.00 01.7 16.3 197 0.0 197 0.0 457 15 3.0 00JIS.. 8.516 7.75 44.0 7.75 44.1 18.00 6.00 70.4 67.4 9 31.0 --- --- 51 165 63.0 50JIS.. 10.58 9.00 68. --- --- 0.50 6.50 138.9 318.5 54 43.9 --- --- 584 178 91.5 300JIS.. 1.539 10.00 96.7 --- --- 3.00 7.00 01.7 350 355.6 80 5.0 --- --- --- --- --- 14 14.000 11.00 114.6 --- --- --- --- --- 400 406.4 305 68.0 --- --- --- --- --- 16 16.000 1.00 149.9 --- --- --- --- --- 44 onnect with the est! opyright 011 Shurjoint

711 reducing tee atalog 011 Shurjoint ductile iron grooved-end fittings are made of ductile iron per STM 536 Gr. 65-45-1 and or STM 395 Gr. 65-45- 15. dimensions are manufacturer s standard. See page 54 for wrought steel grooved-end fittings. 711 Reducing Tee 711 Reducing Tee (Threaded) Nominal Pipe Standard Threaded r. Size O. D. - E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 50 x 50 x 40 60.3 x 60.3 x 48.3 83 83 1. x x1½.375 x.375 x 1.900 3.5 3.5.6 65 x 65 x 5 73.0 x 73.0 x 33.4 95 95 1.7 ½ x ½ x 1.875 x.875 x 1.315 3.75 3.75 3.8 65 x 65 x 40 76.1 x 76.1 x 48.3 95 95 1.8 ½ x ½ x 1½ 3.000 x 3.000 x 1.900 3.75 3.75 3.9 65 x 65 x 50 73.0 x 73.0 x 60.3 95 95.0 ½ x½ x.875 x.875 x.375 3.75 3.75 4.4 65 x 65 x 50 76.1 x 76.1 x 60.3 95 95.0 ½ x ½ x 3.000 x 3.000 x.375 3.75 3.75 4.4 80 x 80 x 5 88.9 x 88.9 x 33.4 108 108.5 3 x 3 x 1 3.500 x 3.500 x 1.315 4.5 4.5 5.5 80 x 80 x 40 88.9 x 88.9 x 48.3 108 108.4 3 x 3 x 1½ 3.500 x 3.500 x 1.900 4.5 4.5 5. 80 x 80 x 50 88.9 x 88.9 x 60.3 108 108.8 3 x 3 x 3.500 x 3.500 x.375 4.5 4.5 6. 80 x 80 x 65 88.9 x 88.9 x 73.0 108 108.8 3 x 3 x ½ 3.500 x 3.500 x.875 4.5 4.5 6. 80 x 80 x 65 88.9 x 88.9 x 76.1 108 108.8 3 x 3 x ½ 3.500 x 3.500 x 3.000 4.5 4.5 6. 100 x 100 x 5 114.3 x 114.3 x 33.4 95 95 4.0 4 x 4 x 1 4.500 x 4.500 x 1.315 3.75 3.75 8.9 100 x 100 x 50 114.3 x 114.3 x 60.3 17 17 4.0 4 x 4 x 4.500 x 4.500 x.375 5.00 5.00 8.8 100 x 100 x 65 114.3 x 114.3 x 73.0 17 17 4.3 4 x 4 x ½ 4.500 x 4.500 x.875 5.00 5.00 9.5 114.3 x 114.3 x 76.1 17 17 4.3 100 x 100 x 76.1mm.. 4.500 x 4.500 x 3.000 5.00 5.00 9.5 100 x 100 x 80 114.3 x 114.3 x 88.9 17 17 4.3 4 x 4 x 3 4.500 x 4.500 x 3.500 5.00 5.00 9.4 15 x 15 x 50 141.3 x 141.3 x 60.3 140 140 5.6 5 x 5 x 5.563 x 5.563 x.375 5.50 5.50 1.4 15 x 15 x 100 141.3 x 141.3 x 114.3 140 140 6. 5 x 5 x 4 5.563 x 5.563 x 4.500 5.50 5.50 13.6 150 x 150 x 50 168.3 x 168.3 x 60.3 165 165 8.0 6 x 6 x 6.65 x 6.65 x.375 6.50 6.50 17.6 150 x 150 x 65 168.3 x 168.3 x 73.0 165 165 8.5 6 x 6 x ½ 6.65 x 6.65 x.875 6.50 6.50 18.7 Nominal Pipe Standard Threaded r. Size O. D. - E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 150 x 150 x 80 168.3 x 168.3 x 88.9 165 165 9. 6 x 6 x 3 6.65 x 6.65 x 3.500 6.50 6.50 0. 150 x 150 x 100 168.3 x 168.3 x 114.3 165 165 8.8 6 x 6 x 4 6.65 x 6.65 x 4.500 6.50 6.50 19.4 165.1 x 165.1 x 50 165.1 x 165.1 x 60.3 165 165 8.0 6 x 6 x 6.500 x 6.500 x.375 6.50 6.50 17.6 165.1 x 165.1 x 76.1 165 165 8.5 165.1 x165.1 x 76.1.. 6.500 x 6.500 x 3.000 6.50 6.50 18.7 165.1 x 165.1 x 80 165.1 x 165.1 x 88.9 165 165 9. 6 x 6 x 3 6.500 x 6.500 x 3.500 6.50 6.50 0. 165.1 x 165.1 x 100 165.1 x 165.1 x 114.3 165 165 8.8 6 x 6 x 4 6.500 x 6.500 x 4.500 6.50 6.50 19.4 00 x 00 x50 19.1 x 19.1 x 60.3 197 197 14.8 8 x 8 x 8.65 x 8.65 x.375 7.75 7.75 3.5 00 x 00 x 80 19.1 x 19.1 x 88.9 197 197 15.5 8 x 8 x 3 8.65 x 8.65 x 3.500 7.75 7.75 34. 00 x 00 x 100 19.1 x 19.1 x 114.3 197 197 0.0 8 x 8 x 4 8.65 x 8.65 x 4.500 7.75 7.75 44.0 00 x 00 x 150 19.1 x 19.1 x 168.3 197 --- 1.0 8 x 8 x 6 8.65 x 8.65 x 6.65 7.75 --- 46. 50 x 50 x 100 73.0 x 73.0 x 114.3 9 9 8.5 10 x 10 x 4 10.750 x 10.750 x 4.500 9.00 9.00 6.8 50 x 50 x 150 73.0 x 73.0 x 168.3 9 --- 30.0 10 x 10 x 6 10.750 x 10.750 x 6.65 9.00 --- 66.0 50 x 50 x 00 73.0 x 73.0 x 19.1 9 --- 31.5 10 x 10 x 8 10.750 x 10.750 x 8.65 9.00 --- 69.3 300 x 300 x 80 33.9 x 33.9 x 88.9 54 54 40.0 1 x 1 x 3 1.750 x 1.750 x 3.500 10.00 10.00 88.1 300 x 300 x 100 33.9 x 33.9 x114.3 54 54 41.0 1 x 1 x 4 1.750 x 1.750 x 4.500 10.00 10.00 90.4 300 x 300 x 150 33.9 x 33.9 x 168.3 54 --- 38.0 1 x 1 x 6 1.750 x 1.750 x 6.65 10.00 --- 83.6 300 x 300 x 00 33.9 x 33.9 x 19.1 54 --- 38.0 1 x 1 x 8 1.750 x 1.750 x 8.65 10.00 --- 83.6 300 x 300 x 50 33.9 x 33.9 x 73.0 54 --- 40.0 1 x 1 x 10 1.750 x 1.750 x 10.750 10.00 --- 88.0 onnect with the est! 45 opyright 011 Shurjoint

7150 ONENTRI REDUER 7151 EENTRI REDUER atalog 011 Shurjoint ductile iron grooved-end fittings are made of ductile iron per STM 536 Gr. 65-45-1 and or STM 395 Gr. 65-45- 15. dimensions are manufacturer s standard. See page 55 for wrought steel grooved-end fittings. E-E 7150 onc. Reducer E-E 7151 Ecc. Reducer Nominal Pipe #7150 onc. Reducer #7151 Ecc. Reducer Size O. D. E - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 3 x 5 4. x 33.4 64 0.0 --- --- 1¼ x 1 1.660 x 1.315.50 0.44 --- --- 40 x 5 48.3 x 33.4 64 0.3 --- --- 1½ x 1 1.900 x 1.315.50 0.51 --- --- 40 x 3 48.3 x 4. 64 0.8 --- --- 1½ x 1¼ 1.900 x 1.660.50 0.6 --- --- 50 x 5 60.3 x 33.4 64 0.37 --- --- x 1.375 x 1.315.50 0.8 --- --- 50 x 3 60.3 x 4. 64 0.33 --- --- x 1¼.375 x 1.660.50 0.73 --- --- 50 x 40 60.3 x 48.3 64 0.35 --- --- x 1½.375 x 1.900.50 0.77 --- --- 65 x 50 73.0 x 60.3 64 0.59 89 0.65 ½ x.875 x.375.50 1.30 3.50 1.44 76.1 x 60.3 64 0.59 89 0.7 76.1mm x 50.. 3.000 x.375.50 1.30 3.50 1.58 80 x 5 88.9 x 33.4 64 0.6 --- --- 3 x 1 3.500 x 1.315.50 1.3 --- --- 80 x 3 88.9 x 4. 64 0.6 --- --- 3 x 1¼ 3.500 x 1.660.50 1.3 --- --- 80 x 40 88.9 x 48.3 64 0.6 --- --- 3 x 1½ 3.500 x 1.900.50 1.5 --- --- 80 x 50 88.9 x 60.3 64 0.6 89 1.0 3 x 3.500 x.375.50 1.3 3.50. 80 x 65 88.9 x 73.0 64 0.6 89 1.0 3 x.5 3.500 x.875.50 1.3 3.50. 80 x 65 88.9 x 76.1 64 0.6 89 1.0 3 x ½ 3.500 x 3.000.50 1.3 3.50. 100 x 50 114.3 x 60.3 76 0.91 10 1.9 4 x 4.500 x.375 3.00.01 4.00.85 100 x 65 114.3 x 73.0 76 0.98 10 1.5 4 x ½ 4.500 x.875 3.00.16 4.00 3.3 114.3 x 76.1 76 1.03 10 1.5 100 x 76.1mm.. 4.500 x 3.000 3.00.7 4.00 3.3 100 x 80 114.3 x 88.9 76 1.0 10 1.34 4 x 3 4.500 x 3.500 3.00. 4.00.95 15 x 100 141.3 x 114.3 89 1.61 10.8 5 x 4 5.563 x 4.500 3.50 3.55 4.00 6.17 150 x 50 168.3 x 60.3 10 1.9 10.0 6 x 6.65 x.375 4.00 4. 4.00 4.41 150 x 65 168.3 x 73.0 10.0 --- 3.07 6 x ½ 6.65 x.875 4.00 4.4 --- 6.77 150 x 80 168.3 x 88.9 10.0 10 3.5 6 x 3 6.65 x 3.500 4.00 4.4 4.00 7.7 150 x 100 168.3 x 114.3 10.1 10.65 6 x 4 6.65 x 4.500 4.00 4.6 4.00 5.84 150 x 15 168.3 x 141.3 10.5 10 4.5 6 x 5 6.65 x 5.563 4.00 5.5 4.00 9.9 165.1 x 60.3 10 1.9 10 165.1mm x 50.. 6.500 x.375 4.00 4. 4.00 4.41 165.1mm 165.3 x 76.1 10 1.9 --- --- x 76.1mm 6.5.00 x 3.000 4.00 4. --- --- Nominal Pipe #7150 onc. Reducer #7151 Ecc. Reducer Size O. D. E - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 00 x 80 19.1 x 88.9 17 4.3 --- --- 8 x 3 8.65 x 3.500 5.00 9.48 --- --- 00 x 100 19.1 x 114.3 17 5.1 17 5.6 8 x 4 8.65 x 4.500 5.00 11. 5.00 11.60 00 x 150 19.1 x 168.3 17 5. 17 5.46 8 x 6 8.65 x 6.65 5.00 11.4 5.00 1.03 50 x 100 73.0 x 114.3 15 9.0 15 1.0 10 x 4 10.750 x 4.500 6.00 19.8 6.00 6.4 50 x 150 73.0 x 168.3 15 9.0 15 11.5 10 x 6 10.750 x6.65 6.00 19.8 6.00 5.3 50 x 00 73.0 x 19.1 15 9.5 178 1.17 10 x 8 10.750 x 8.65 6.00 0.9 7.00 6.83 300x150 33.9 x 168.3 178 14.0 178 18.0 1 x 6 1.750 x 6.65 7.00 30.87 7.00 39.6 300 x 00 33.9 x 19.1 178 14.0 178 18.5 1 x 8 1.750 x 8.65 7.00 30.8 7.00 40.79 300 x 50 33.9 x 73.0 178 13.66 178 0.0 1 x 10 1.750 x 10.750 7.00 30.1 7.00 44.10 350 x 00 355.6 x 19.1 03 19.0 --- --- 14 x 8 14.000 x 8.65 8.00 41.8 --- --- 350 x 50 355.6 x 73.0 330 3.59 330 1.0 14 x 10 14.000 x 10.750 13.00 5.01 13.00 46.30 350 x 300 355.6 x 33.9 330 3.0 330 6.5 14 x 1 14.000 x 1.750 13.00 50.71 13.00 58.4 400 x 00 406.4 x 19.1 9 3.7 --- --- 16 x 8 16.000 x 8.65 9.00 5.5 --- --- 400 x 300 406.4 x 33.9 356 31.0 356 31.0 16 x 1 16.000 x 1.750 14.00 68.34 14.0 68.34 400 x 350 406.4 x 355.6 356 9.0 356 36.5 16 x 14 16.000 x 14.000 14.0 63.93 14.0 80.47 450 x 300 457. x 33.9 41 35.5 --- --- 18 x 1 18.000 x 1.750 9.50 78.1 --- --- 450 x 350 457. x 355.6 381 36.5 381 39.5 18 x 14 18.000 x 14.000 15.00 80.47 15.00 87.0 450 x 400 457. x 406.4 381 31.7 381 31.00 18 x 16 18.000 x 16.000 15.00 68.94 15.00 68.34 500 x 300 508.0 x 406.4 381 43.0 --- --- 0 x 1 0.000 x 16.000 15.00 94.6 --- --- 500 x 400 508.0 x 406.4 508 46.0 --- --- 0 x 16 0.000 x 18.000 0.00 101.41 --- --- 500 x 450 508.0 x 457. 54 46.0 --- --- 0 x 18 0.000 x 16.000 10.00 101. --- --- 600 x 50 609.6 x 73.0 305 36.0 --- --- 4 x 10 4.000 x 10.750 1.00 79. --- --- 600 x 300 609.6 x 33.9 305 70.0 --- --- 4 x 1 4.000 x 1.750 1.00 154.0 --- --- 600 x 400 609.6 x 406.4 305 59.5 --- --- 4 x 16 4.000 x 16.000 1.00 131.18 --- --- 600 x 450 609.6 x 457. 508 48.5 --- --- 4 x 18 4.000 x 18.000 0.00 106.9 --- --- 600 x 500 609.6 x 508.0 508 71.0 --- --- 4 x 0 4.000 x 0.000 0.00 156.53 --- --- 46 onnect with the est! opyright 011 Shurjoint

7160 END P MODEL 7160T TRNSITION P MODEL atalog 011 7160H domed end P Shurjoint Model 7160T is an ideal transition fitting when a large reduction is required and can be used in place of more costly reducers or swaged nipples. In addition the 7160T can serve as a drain fitting. Shurjoint 7160H end caps are cast of ductile iron and are designed to withstand pressure evenly over the entire spherical surface. The Model 7160H End ap is designed for use on 10-4 mechanical piping applications. E-E 1 ~ 1 Nominal Pipe #7160 End ap Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs 5 33.4 0.1 1 1.315 0.87 0. 3 4. 5 0.15 1¼ 1.660 1.00 0.33 40 48.3 5 0. 1½ 1.900 1.00 0.4 50 60.3 5 0.3.375 1.00 0.7 65 73.0 5 0.4 ½.875 1.00 0.9 76.1 5 0.4 76.1 mm.. 3.000 1.00 0.9 80 88.9 5 0.7 3 3.500 1.00 1.5 100 114.3 5 1.0 4 4.500 1.00. 108.0 5 1.1 108 mm.. 4.50 1.00.4 15 141.3 5 1.7 5 5.563 1.00 3.7 133.0 5 1.7 133 mm.. 5.50 1.00 3.7 139.7 5 1.7 139.7 mm.. 5.500 1.00 3.7 150 168.3 5.7 6 6.65 1.0 5.96 159.0 5.3 159.0 mm.. 6.50 1.00 5.1 165.1 5.7 165.1 mm.. 6.500 1.00 5.96 00 19.1 30 4.6 8 8.65 1.18 10.14 50 73.0 3 7.0 10 10.750 1.5 15.4 300 33.9 3 10.0 1 1.750 1.5.0 16.3 30 4.6 00 JIS.. 8.516 1.18 10.1 67.4 3 7.0 50 JIS.. 10.58 1.5 15.4 318.5 3 10.0 300 JIS.. 1.539 1.5.0 SW: segment-welded steel. L 7160T Nominal Size Grooved x Threaded L Weight mm / in mm / in Kgs / Lbs 50 x 5 3.8 0.5 x 1 0.94 0.55 50 x 3 3.8 0.5 x 1¼ 0.94 0.55 65 x 5 3.8 0.44 ½ x 1 0.94 0.97 65 x 3 3.8 0.35 ½ x 1¼ 0.94 0.77 65 x 40 3.8 0.30 ½ x 1½ 0.94 0.70 80 x 5 5.4 0.65 3 x 1 1.0 1.43 80 x 3 5.4 0.65 3 x 1¼ 1.0 1.43 80 x 40 5.4 0.60 3 x 1½ 1.0 1.30 80 x 50 5.4 0.60 3 x 1.0 1.33 100 x 5 5.4 0.95 4 x 1 1.0.09 100 x 3 5.4 0.95 4 x 1¼ 1.0.09 100 x 40 5.4 0.90 4 x 1½ 1.0.00 100 x 50 5.4 0.90 4 x 1.0 1.98 150 x 5 5.4.50 6 x 1 1.0 5.5 150 x 3 5.4.50 6 x 1¼ 1.0 5.5 150 x 40 5.4.50 6 x 1½ 1.0 5.50 150 x 50 5.4.50 6 x 1.0 5.50 E-E 10 ~ 4 Nominal Pipe #7160H Domed End ap Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs 50 73.0 76.1 5.5 10 10.750 3.00 1.1 300 33.90 76.1 7.4 1 1.750 3.00 16.3 350 355.6 10 11.95 14 14.000 4.00 6.35 400 406.4 10 14.5 16 16.000 4.00 31.97 450 457. 17 17.8 18 18.000 5.00 39.4 500 508.0 15 4.5 0 0.000 6.00 53.9 550 558.8 15 44.0.000 6.00 97.0 600 609.6 15 34.5 4 4.000 6.00 75.9 MODEL 7160P END P w/plug Nominal Pipe 7160P Size O.D. Plug Size mm / in mm / in mm / in 50 60.3 15.375 ½ 65 73.0 15 ½.875 ½ 76.1 15 76.1 mm.. 3.000 ½ 80 88.9 15 3 3.500 0.5 100 114.3 5 4 4.500 1 15 141.3 5 5 5.563 1 Nominal Pipe 7160P Size O.D. Plug Size mm / in mm / in mm / in 139.7 5 139.7 mm.. 5.500 1 150 168.3 5 6 6.65 1 165.1 5 165.1 mm.. 6.500 1 00 19.1 40 8 8.65 1½ 50 73.0 40 10 10.750 1½ 300 33.9 40 1 1.750 1½ onnect with the est! 47 opyright 011 Shurjoint

S 7110LR 1.5D 90 elbow 7111LR 1.5D 45 elbow 7137 TRUE-Y 7110LR LR 90 Elbow, 1.5D 7111LR LR 45 Elbow, 1.5D -LE 7137 True-Y atalog 011 -SE Nominal Pipe #7110LR 1.5D LR 90 Elbow #7111LR 1.5D LR 45 Elbow #7137 TRUE-Y Size O. D. - E - E - LE - SE mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in mm / in Kgs / Lbs 50 60.3 111 1.1 70 0.8 83 70 1.1.375 4.38.4.75 1.8 3.5.75.5 65 73.0 17 1.8 76 1.4 95 76 1.7 ½.875 5.0 4.0 3.00 3.1 3.75 3.00 3.75 76.1 17 1.8 76 1.45 95 76 1.8 76.1 mm.. 3.000 5.0 4.0 3.00 3.0 3.75 3.00 3.97 80 88.9 149 1.8 86 1.8 108 83.50 3 3.500 5.88 4.0 3.38 3.97 4.5 3.5 5.51 100 114.3 191 4.7 10 3.5 17 95 4.7 4 4.500 7.50 10.3 4.00 7.7 5.00 3.75 10.43 15 141.3 41 8.3 17 4.6 140 10 5.3 5 5.563 9.50 18.3 5.0 10.14 5.50 4.00 11.60 139.7 41 8.3 17 4.6 140 10 6.8 139.7 mm.. 5.500 9.50 18.3 5.0 10.14 5.50 4.00 14.96 150 168.3 73 11.5 140 8. 165 114 8.9 6 6.65 10.75 5.3 5.50 18.0 6.50 4.50 19.6 165.1 73 11.5 140 8. 165 114 8.9 165.1 mm.. 6.500 10.75 5.3 5.50 18.0 6.50 4.50 19.6 00 19.1 36 3.0 184 16.0 197 15 15.6 8 8.65 14.5 50.7 7.5 35.7 7.75 6.00 34.33 50 73.0 438 4. 16 36.1 9 165 5.5 10 10.750 17.5 73.0 8.50 78.59 9.00 6.50 56. 300 33.9 51 71.5 54 33.5 54 178 36.0 1 1.750 0.50 157.6 10.00 73.86 10.00 7.00 79.37 MODELS 711G Goose Neck -½ Elbow MODEL 7110-90 ELOW With ase Support Two model 711G elbows in combination with a coupling will serve as a universal joint and is ideal for instances where a pipe line is in need of a slight adjustment during make-up. The Model 7110- is a ductile iron 90 grooved-end elbow with base support, designed for installation at the bottom of a riser system. n anchor can be placed in conjunction with the base to support the weight of the pipe, coupling and fluid. E-E U H Nominal Pipe 711G ½ Elbows Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs 40 48.3 95 G 0.6 1½ 1.900 3.75 1.3 50 60.3 95 G 0.8.375 3.75 1.3 65 73.0 10 G 1.0 ½.875 4.00. 80 88.9 114 G 1.4 3 3.500 4.50 3.1 100 114.3 17 G.0 4 4.500 5.00 4.4 15 141.3 17 G 3.3 5 5.563 5.00 7.3 150 168.3 159 G 5.0 6 6.65 6.5 11.0 00 19.1 197 G 10.0 8 8.65 7.75.0 16.3 197 G 10.0 00JIS.. 8.516 7.75.0 T S M Nominal Pipe Dimensions Size O. D. - E H u T S M Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 80 88.9 108 14 13 14 17 99 4.75 3 3.500 4.5 4.88 0.50 0.56 5.00 3.88 10.47 100 114.3 17 140 13 16 15 11 6.91 4 4.500 5.00 5.50 0.50 0.6 6.00 4.75 15.3 150 168.3 165 178 16 18 178 140 11.93 6 6.65 6.50 7.00 0.6 0.69 7.00 5.50 6.30 00 19.1 197 13 4 9 191 46.1 8 8.65 7.76 8.38 0.88 0.94 9.00 7.50 101.4 50 73.0 9 48 4 9 191 0.00 10 10.750 9.0 9.75 0.88 0.94 9.00 7.50 44.00 300 33.9 54 86 5 5 79 41 3.00 1 1.750 10.00 11.5 1.00 1.00 11.00 9.50 70.40 48 onnect with the est! opyright 011 Shurjoint

S 901 90 SR ELOW 903 SR tee atalog 011 Shurjoint short radius fittings, while primarily designed for fire protection applications, can also be used for general service requirements. Nominal Pipe Pipe #901 SR 90 Elbow #903 SR Straight Tee Size O.D. - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 50 60.3 70 0.7 70 1.0.375.75 1.5.75. 65 73.0 76 0.9 76 1.3 ½.875 3.00.0 3.00.9 76.1 76 1.1 76 1.3 76.1mm.. 3.000 3.00.5 3.00.9 80 88.9 86 1.4 86.0 3 3.500 3.38 3.1 3.38 4.4 100 114.3 10. 10 3.6 4 4.500 4.00 4.9 4.00 7.9 15 139.7 14 3.6 14 5.1 5 5.500 4.88 7.9 4.88 11.1 15 141.3 14 3.6 14 4.6 5 5.563 4.88 7.9 4.88 10.1 165.1 140 5.9 140 7.5 165.1mm.. 6.500 5.50 1.9 5.50 16.5 150 168.3 140 5.9 140 7.8 6 6.65 5.50 1.9 5.50 17. 00 19.1 176 10.6 176 16.5 8 8.65 6.94 3.4 6.94 36.3 MODEL 7110DR DRIN ELOW The Model 7110DR is a grooved-end ductile iron cast elbow with an integral 1" NPT or SP drain. The 7110DR is designed for use in fire protection and general service applications. D E 1" NPT Nominal Pipe Pipe Dimensions Size O.D. - E D E Weight mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 60.3 83 57. 40 1.0.375 3.7.5 1.57. 65 73.0 95 70 40 1.3 ½.875 3.75.75 1.57.8 76.1 95 70 40 1.3 76.1mm.. 3.000 3.75.75 1.57.8 80 88.9 108 70 49.1 3 3.500 4.5.75 1.93 4.6 100 114.3 17 70 63 3.0 4 4.500 5.00.75.48 6.6 165.1 165 70 90 6.1 165.1mm.. 6.500 6.50.75 3.54 13.4 150 168.3 165 70 90 6.1 6 6.65 6.50.75 3.54 13.4 00 19.1 197 83 114 11.6 8 8.65 7.76 3.7 4.49 5.6 MODEL 717 STNDPIPE TEE NPT or SP The Model 717 is a grooved-end tee with a ½" NPT/SP threaded branch, specially designed for use on fire protection standpipes. Nominal Pipe Dimensions Size O.D. - ER - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 100 x 100 x 65 114.3 x 114.3 x 73.0 83 10.65 4 x 4 x ½ 4.500 x 4.500 x.875 3.5 4.00 5.84 150 x 150 x 65 168.3 x 168.3 x 73.0 83 17 4.30 6 x 6 x ½ 6.65 x 6.65 x.875 3.5 5.00 9.48 R onnect with the est! 49 opyright 011 Shurjoint

76 Y-STRINER atalog 011 The Shurjoint Model 76 Grooved-end Y-Strainers are designed to strain foreign matter and debris from piping systems and provide inexpensive protection for costly pumps, meters and other pipeline components. The Model 76 features a low pressure drop, fast installation, easy maintenance and is suitable for either vertical or horizontal installation. Standard Screen: 1/16 (1.6mm) perforated for 3 sizes and 1/8 (3.mm) perforated for 4 16. Other customized screen perforations are also available upon request. Size Nom. Working Max. Service in / mm Rating Pressure Temperature 6 300 psi @100 F lass 150 50-150.. 0 ar @38 EPDM: 30 F / 110 8" 30" 175 psi @100 F Nitrile: 180 F / 8 lass 15 00 750.. 1 ar @38 *Working pressure is based on connection with roll- or cut-grooved standard wall carbon steel pipe. *Shell test, 1.5 times the working pressure, is the proof test pressure. "-1" 14"-16" 18"-30" Fabricated Nominal Pipe Max. Working Dimensions Drain Plug pprox. Size OD Pressure Size Weight mm / in mm / in bar / psi mm / in mm / in mm / in mm / in Kgs / Lb 50 60.3 0 48 181 116 15 4..375 300 9.75 7.13 4.56 ½ 9.3 65 73.0 0 73 199 1 15 6.0 ½.875 300 10.75 7.83 4.80 ½ 13. 76.1 0 73 199 1 15 6.0 76.1mm.. 3.000 300 10.75 7.83 4.80 ½ 13. 80 88.9 0 99 1 19 15 7.6 3 3.500 300 11.75 8.70 5.08 ½ 16.8 100 114.3 0 36 69 168 5 1.0 4 4.500 300 14.5 10.59 6.61 1 6.4 139.7 0 419 330 58 5.0 139.7mm.. 5.500 300 16.50 13.00 10.16 1 48.4 15 141.3 0 419 330 58 5.0 5 5.563 300 16.50 13.00 10.16 1 48.4 150 168.3 0 470 357 19 5 9.7 6 6.65 300 18.50 14.05 8.6 1 65.4 165.1 0 470 357 19 5 9.5 165.1mm.. 6.500 300 18.50 14.05 8.6 1 65.0 16.3 16 610 454 84 40 55.0 00 JIS.. 8.516 3 4.00 17.87 11.18 1½ 11.0 00 19.1 16 610 454 84 40 55.0 8 8.65 3 4.00 17.87 11.18 1½ 11.0 67.4 1 686 5 30 40 83.0 50 JIS.. 10.58 175 7.00 0.55 1.60 1½ 18.6 50 73.0 1 686 5 30 40 83.0 10 10.750 175 7.00 0.55 1.60 1½ 18.6 318.5 1 76 609 366 40 16.0 300 JIS.. 1.539 175 30.00 4.00 14.40 1½ 77. 300 33.9 1 76 609 366 40 16.0 1 1.750 175 30.00 4.00 14.40 1¼ 77. 350 355.6 1 1016 760 480 3 46.5 14 14.000 175 40.00 9.9 18.90 1¼ 543.4 400 406.4 1 1067 777 483 3 3.0 16 16.000 175 4.00 30.60 19.00 1¼ 709.9 450 457. 1 13 851 711 50 375.0 18 18.000 175 48.50 33.50 8.00 85.0 500 508.0 1 1365 991 813 50 480.0 0 0.000 175 53.75 39.00 3.00 1056.0 550 558.8 1 154 109 838 50 670.0.000 175 60.00 40.50 33.00 1474.0 600 609.6 1 166 1067 864 50 765.0 4 4.000 175 64.00 4.00 34.00 1683.0 650 660.4 1 177 1194 965 50 100.0 6 6.000 175 68.00 47.00 38.00 44.0 700 711. 1 189 1308 1041 50 1370.0 8 8.000 175 7.00 51.50 41.00 3014.0 750 76.0 1 1905 14 1130 50 1585.0 30 30.000 175 75.00 56.00 4450 3487.0 88 onnect with the est! opyright 011 Shurjoint

715 ULLHED TEE R atalog 011 The Model 715 is a grooved-end bullhead tee, specifically designed for use on fire protection systems. The 715 allows you to directly split the flow into two reduced branch lines without the need for concentric reducers and multiple couplings. Fire Protection pplications 715 ullhead Tee Waterflow Indicator RV Riser heck Valve With Trim Kit SJ-700W utterfly Valve 7707/7705 Flexible ouplings Z07/7771 Rigid ouplings Nominal Pipe Pipe Dimensions Size O.D. - ER - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 50 x 50 x 65 60.3 x 60.3 x 73.0 95 83 1.83 x x ½.375 x.375 x.875 3.74 3.7 4.03 50 x 50 x 80 60.3 x 60.3 x 88.9 108 95 1.97 x x 3.375 x.375 x 3.500 4.5 3.74 4.34 50 x 50 x 100 60.3 x 60.3 x 114.3 17 10 3.0 x x 4.375 x.375 x 4.500 5.00 4.0 7.05 65 x 65 x 80 73.0x 73.0 x 88.9 108 95.55 ½ x ½ x 3.875 x.875 x 3.500 4.5 3.75 5.6 65 x 65 x 100 73.0 x 73.0 x 114.3 17 10 3.3 ½ x ½ x 4.875 x.875 x 4.500 5.00 4.00 7.3 80 x 80 x 100 88.9 x 88.9 x 114.3 17 10 3.60 3 x 3 x 4 3.500 x 3.500 x 4.500 5.00 4.00 7.94 100x 100 x 150 114.3 x 114.3 x 168.3 165 17 6.80 4 x 4 x 6 4.500 x 4.500 x 6.65 6.50 5.00 14.99 15 x 15 x 00 141.3 x 141.3 x 19.1 197 140 14.00 5 x 5 x 8 5.563 x 5.563 x 8.65 7.75 5.50 31.00 150 x 150 x 00 168.3 x 168.3 x 19.1 197 165 13.1 6 x 6 x 8 6.65 x 6.65 x 8.65 7.75 6.50 9.1 MODEL 7150F REDUING SOKET (Gr x Ft) 7150M REDUING NIPPLE (Gr x Mt) The Shurjoint Models 7150F & 7150M are designed for making a direct reduction from a grooved system to a female or male threaded system without the need for more costly swaged nipples or adapters. 7150F 7150M L L Nominal Size 7150F 7150M Grooved x Threaded L Weight L Weight mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 40 x 5 63.5 0.7 63.5 0.4 1½ x 1.5 0.60.5 0.53 50 x 5 63.5 0.4 63.5 0.40 x 1.5 0.9.5 0.88 50 x 3 63.5 0.46 63.5 0.3 x 1¼.5 1.01.5 0.70 50 x 40 63.5 0.43 63.5 0.47 x 1½.5 0.95.5 1.04 65 x 5 63.5 0.55 63.5 0.40 ½ x 1.5 1.1.5 0.88 63.5 0.55 63.5 0.75 76.1mm x 5...5 1.1.5 1.64 65 x 3 63.5 0.53 63.5 0.7 ½ x 1¼.5 1.17.5 1.59 63.5 0.53 63.5 0.7 76.1mm x 3...5 1.17.5 1.59 65 x 40 63.5 0.49 63.5 0.78 ½ x 1½.5 1.08.5 1.7 63.5 0.49 63.5 0.78 76.1mm x 40...5 1.08.5 1.7 65 x 50 63.5 0.69 63.5 0.4 ½ x.5 1.5.5 0.9 63.5 0.69 63.5 0.49 76.1mm x 50...5 1.5.5 1.09 80 x 5 63.5 0.87 63.5 0.57 3 x 1.5 1.91.5 1.5 80 x 3 63.5 0.68 63.5 0.76 3 x 1¼.5 1.50.5 1.67 80 x 40 63.5 0.74 63.5 0.74 3 x 1½.5 1.63.5 1.63 80 x 50 63.5 0.71 63.5 0.60 3 x.5 1.56.5 1.3 80 x 65 63.5 1.00 63.5 1.00 3 x ½.5.0.5.0 Nominal Size 7150F 7150M Grooved x Threaded L Weight L Weight mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 63.5 1.00 63.5 1.00. 80 x 76.1mm..5.0.5.0 100 x 3 76.1 1.06 76.1 0.99 4 x 1¼ 3.33 3.19 100 x 40 76.1 0.93 76.1 0.93 4 x 1½ 3.05 3.05 100 x 50 76.1 1.03 76.1 1.05 4 x 3.9 3.31 100 x 65 76.1 1.0 76.1 0.93 4 x ½ 3.5 3.05 76.1 1.0 76.1 0.93 100 x 76.1mm.. 3.5 3.05 15 x 40 88.9 1.79 88.9 0.93 5 x 1½ 3.5 3.94 3.5.05 88.9 1.79 88.9 0.93 139.7mm x 40.. 3.5 3.94 3.5.05 150 x 40 101.6.94 101.6.0 6 x 1½ 4 6.47 4 4.84 101.6.5 101.6.16 165.1mm x 40.. 4 5.56 4 4.75 150 x 50 101.6.40 101.6.3 6 x 4 5.8 4 4.91 101.6.40 101.6.3 165.1mm x 50.. 4 5.8 4 4.91 150 x 65 101.6.48 101.6.6 6 x ½ 4 5.46 4 4.97 101.6.00 101.6.6 165.1mm x 65.. 4 4.40 4 4.97 150 x 100 101.6.89 101.6.10 6 x 4 4 6.37 4 4.6 101.6.10 101.6.10 165.1mm x 100.. 4 4.6 4 4.6 50 onnect with the est! opyright 011 Shurjoint

899 END-LL FITTING The Model 899 End-ll fitting is a unique domed end cap fitting available with a ½, ¾ or 1 NPT or SP threaded outlet. Designed as an end of line fitting, the End- ll features two multi-function bosses which can be used for the direct connection of sprinkler heads, sprigs, drops, drains and or gauges. NPT or SP Nominal Size Dimensions Grooved x Threaded a Weight mm / in mm / in mm / in Kgs / Lbs 3 x 15 44.5 30.1 0.3 1¼ x ½ 1.750 1.190 0.7 3 x 0 44.5 30.1 0.3 1¼ x ¾ 1.750 1.190 0.7 3 x 5 48.3 31.8 0.3 1¼ x 1 1.900 1.50 0.7 40 x 15 44.5 33.3 0.4 1½ x ½ 1.750 1.313 0.9 40 x 0 44.5 33.3 0.4 1½ x ¾ 1.750 1.313 0.9 40 x 5 48.3 34.9 0.4 1½ x 1 1.900 1.375 0.9 50 x 15 44.5 39.7 0.5 x ½ 1.750 1.56 1.1 50 x 0 44.5 39.7 0.5 x ¾ 1.750 1.56 1.1 50 x 5 48.3 41.3 0.5 x 1 1.900 1.65 1.1 65 x 15 44.5 44.5 0.6 ½ x ½ 1.750 1.750 1.3 65 x 0 44.5 44.5 0.6 ½ x ¾ 1.750 1.750 1.3 65 x 5 48.3 46.0 0.6 ½ x 1 1.900 1.813 1.3 atalog 011 MODEL 55 DPTER NIPPLE (Gr x MT) The Shurjoint Model 55 is an integral cast adapter that allows for a direct transition from a grooved system to a male threaded system or component. For other sizes see page 55, Models 57 through 59 nipples adapters. L NPT or SP Nominal Size Grooved x Threaded L Weight mm / in mm / in Kgs / Lbs 40 x 40M 63.5 0.35 1½ x 1½M.50 0.77 50 x 50M 63.5 0.40 x M.50 0.90 MODEL 56 HOSE NIPPLE The Shurjoint Model 56 hose nipple allows for a direct connection with rubber or plastic hoses. Material: Ductile iron STM 536 Gr. 65-45- 1 and or STM 395 Gr. 65-45-15. E-E Nominal Pipe Size O.D. E - E Weight mm / in mm / in mm / in Kgs / Lbs 3 4. 9 0.3 1¼ 1.660 3.6 0.7 40 48.3 10 0.3 1½ 1.900 4.0 0.7 50 60.3 117 0.6.375 4.6 1. 65 73.0 140 1.0 ½.875 5.5. 80 88.9 15 1.5 3 3.500 6.0 3.3 100 114.3 184.5 4 4.500 7.5 5.5 15 141.3 48 3.7 5 5.563 9.75 8.1 150 168.3 79 6.6 6 6.65 11.0 14.5 00 19.1 318 11.0 8 8.65 1.5 4. onnect with the est! 51 opyright 011 Shurjoint

Sprinkler Hubs atalog 011 The Shurjoint Sprinkler Hubs are grooved-end manifold fittings with a number of threaded outlets to accommodate flexible sprinkler hoses. The Sprinkler Hubs can also be used in combination with flexible sprinkler hoses and traditional hard piping depending on your requirements. These fittings work as a hub for multiple flexible hoses and or hard pipe runs, thus reducing the number or headers, drop nipples and fittings required. ll outlets are 1 NPT or SPT. Maximum working pressure is 300 psi (0 bar,.0 MPa) WP. culus listed and FM approved. The -to-e dimensions conform to NSI 16.3 lass 150. MODEL 850 Sprinkler Hub 3 Outlets MODEL 853 Sprinkler End Hub 4 Outlets Size a N.W. mm / in mm / in mm / in Kgs / Lbs 50 x 50 x 5 (3) 60 51 0.90 x x 1 (3).38.0.00 65 x 65 x 5 (3) 60 57 1.5 ½ x ½ x 1 (3).38.5.75 ( ): Number of outlets Size a N.W. mm / in mm / in mm / in Kgs / Lbs 40 x 5 (4) 60 46 0.74 1½ x 1 (4).38 1.80 1.63 50 x 5 (4) 60 51 0.88 x 1 (4).38.0 1.94 65 x 5 (4) 60 57 1.15 ½ x 1 (4).38.5.54 ( ): Number of outlets MODEL 851 Reducing Sprinkler Hub 3 Outlets Size a N.W. mm / in mm / in mm / in Kgs / Lbs 50 x 40 x 5 (3) 60 51 1.14 x 1½ x 1 (3).38.0.5 65 x 40 x 5 (3) 60 57 1.0 ½ x 1½ x 1 (3).38.5.65 65 x 50 x 5 (3) 60 60 1.3 ½ x x 1 (3).38.5.71 ( ): Number of outlets 5 onnect with the est! opyright 011 Shurjoint

7114 Hydrant ELOW atalog 011 The Model 7114 Hydrant Elbow is designed for use on fire protection systems. The small end of the elbow offers both a ½" SP threaded outlet as well as a 3" grooved connection. The boss can be factory tapped to 1" SP on request. -E ½" SP Threaded 3" Grooved oss Nominal Pipe Pipe Dimensions Size O.D. - E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 100 x 80 x 5 114.3 x 88.9 x 33.4 10 95.70 4 x 3 x 1 4.500 x 3.500 x 1.315 4.00 3.75 5.95 150 x 80 x 5 165.1 x 88.9 x 33.4 130 130 4.0 6 x 3 x 1 6.500 x 3.500 x 1.315 5.13 5.13 8.8 MODEL 71 Hydrant TEE 3" Grooved ½" SP Threaded The Model 71 Hydrant Tee is designed for use on fire protection systems. The 71 tee offers both a ½" SP threaded and a 3" grooved outlet. The boss can be factory tapped to 1" SP on request. -E oss Nominal Pipe Pipe Dimensions Size O.D. - E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs 100 x 100 x 80 114.3 x 114.3 x 88.9 10 10 3.50 4 x 4 x 3 4.500 x 4.500 x 3.500 4.00 4.00 7.7 165.1 x 165.1 x 80 165.1 x 165.1 x 88.9 130 130 5.54 6 x 6 x 3 6.500 x 6.500 x 3.500 5.13 5.13 1.1 MODEL 7133 PITHER TEE The Shurjoint pitcher tee provides a quick and easy connection and transition from a grooved riser system to a threaded hydrant valve outlet. The pitcher tee is designed for 3", 4" and 6" steel pipe risers with a ½" SP threaded or 3" grooved hydrant connection outlet. 3" Grooved ½ SP threaded Nominal Pipe Pip Hydrant Dimensions approx. Size O.D. Outlet Weight mm / in mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 88.9 x 88.9 x 76.1 SP 11 11 69.8 80 x 80 x 76.1mm. 3.500 x 3.500 x 3.000 Taper 4.75 4.75.7 6. 114.3 x 114.3 x 76.1 SP 11 133 69 3.4 100 x 100 x 76.1mm. 4.500 x 4.500 x 3.000 Taper 4.75 5.5.7 7.5 165.1 x 165.1 x 76.1 SP 11 159 69 8.7 165.1 x 165.1 x 76.1mm. 6.500 x 6.500 x 3.000 Taper 4.75 6.5.7 19.1 onnect with the est! 53 opyright 011 Shurjoint

WROUGHT GROOVED FITTINGS MODEL atalog 011 W110 90 ELOW, S/R W110LR 90 ELOW, L/R W111LR 45 ELOW W10 TEE W160 P Shurjoint wrought steel grooved fittings are fabricated from standard weight (0.375 or 9.5mm) carbon steel pipe to STM 34 Gr. WP, or segmentally welded with carbon steel of the same or equivalent grade. dimensions conform to NSI 16.9. W110 W110LR W111LR W10 E-E W160 Nominal Pipe W110 90 S/R Elbows W110LR 90 L/R Elbows W111LR 45 L/R Elbows W10 Tee W160 ap Size O.D. Weight Weight Weight Weight E-E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 350 355.6 355.6 45.3 533.4 67.9.3 34.0 79.4 53.5 165.0 15.9 14 14.000 14.00 99.7 1.00 149.4 8.75 74.8 11.00 117.7 6.50 35.0 400 406.4 406.4 59.1 609.6 89.0 54.0 44.6 304.8 66.1 178.0 0.0 16 16.000 16.00 130.0 4.00 195.8 10.00 98.1 1.00 145.4 7.00 44.0 450 457. 457. 75.3 685.8 113.0 85.5 56.5 34.9 83.9 03.0 5.5 18 18.000 18.00 165.7 7.00 48.6 11.5 14.3 13.50 184.6 8.00 56.1 500 508.0 508.0 93.1 76.0 140.0 317.5 70.0 381.0 104.0 9.0 31.8 0 0.000 0.00 04.8 30.00 308.0 1.50 154.0 15.00 8.8 9.00 70.0 550 558.8 558.8 113.0 838. 169.0 34.9 85.0 419.1 16.0 54.0 38.8.000.00 48.6 33.00 371.8 13.50 187.0 16.50 77. 10.00 85.4 600 609.6 609.6 135.0 914.4 0.0 381.0 101.0 431.8 139.0 67.0 45.1 4 4.000 4.00 97.0 36.00 444.4 15.00. 17.00 305.8 10.50 99. MODEL W11 Reducing Tee Material: STM 34 Gr. WP, standard weight (0.375 or 9.5mm), or carbon steel of the same or equivalent grade. & - dimensions conform to NSI 16.9 - W11 Nominal Pipe W11 Reducing Tee Size O. D. - E - Weight mm / in mm / in mm / in mm / in Kgs / Lbs 350 x 150 355.6 x 168.3 79.0 38.0 46.0 14 x 6 14.000 x 6.65 11.0 9.37 101.0 350 x 00 355.6 x 19.1 79.0 48.0 46.5 14 x 8 14.000 x 8.65 11.0 9.76 10.30 350 x 50 355.6 x 73.0 79.0 57.0 47.7 14 x 10 14.000 x 10.750 11.0 10.1 104.94 350 x 300 355.6 x 33.9 79.0 70.0 44.0 14 x 1 14.000 x 1.750 11.0 10.63 96.8 400 x 150 406.4 x 168.3 30.50 64.0 57. 16 x 6 16.000 x 6.65 1.0 10.40 15.84 400 x 00 406.4 x 19.1 305.0 73.0 57.8 16 x 8 16.000 x 8.65 1.0 10.75 17.16 400 x 50 406.4 x 73.0 305.0 8.0 58.9 16 x 10 16.000 x 10.750 1.0 11.10 19.58 400 x 300 406.4 x 33.9 305.0 95.0 60.1 16 x 1 16.000 x 1.750 1.0 11.61 13. 400 x 350 406.4 x 355.6 305.0 305.0 61.1 16 x 14 16.000 x 14.000 1.0 1.00 134.4 450 x 150 457. x 168.3 343.0 89.0 7.6 18 x 6 18.000 x 6.65 13.5 11.38 159.7 450 x 00 457. x 19.1 343.0 98.0 73.0 18 x 8 18.000 x 8.65 13.5 11.38 160.60 450 x 50 457. x 73.0 343.0 308.0 74.0 18 x 10 18.000 x 10.750 13.5 1.13 16.80 450 x 300 457. x 33.9 343.0 31.0 75.1 18 x 1 18.000 x 1.750 13.5 1.64 165. 450 x 350 457. x 355.6 343.0 330.0 76.0 18 x 14 18.000 x 14.000 13.5 13.00 167.0 450 x 400 457. x 406.4 343.0 330.0 76.3 18 x 16 18.000 x 16.000 13.5 13.00 167.86 Nominal Pipe W11 Reducing Tee Size O. D. - E - Weight mm / in mm / in mm / in mm / in Kgs / Lbs 500 x 150 508.0 x 168.3 381.0 314.0 89.5 0 x 6 0.000 x 6.65 15.0 1.36 196.90 500 x 00 508.0 x 19.1 381.0 34.0 90.0 0 x 8 0.000 x 8.65 15.0 1.76 198.0 500 x 50 508.0 x 73.0 381.0 333.0 90.9 0 x 10 18.000 x 10.750 18.0 13.11 199.98 500 x 300 508.0 x 33.9 381.0 346.0 9.0 0 x 1 0.000 x 1.750 15.0 13.6 0.40 500 x 350 508.0 x 355.6 381.0 356.0 9.9 0 x 14 0.000 x 14.000 15.0 14.0 04.38 500 x 400 508.0 x 406.4 381.0 356.0 93.6 0 x 16 0.000 x 16.000 15.0 14.0 04.60 500 x 450 508.0 x 457. 381.0 368.0 94.5 0 x 18 0.000 x18.000 15.0 14.50 07.90 600 x 150 609.6 x 168.3 43.0 365.0 1.0 4 x 6 0.000 x 6.65 17.0 14.38 68.40 600 x 00 609.6 x 19.1 43.0 375.0 13.0 4 x 8 0.000 x 8.65 17.0 14.76 70.6 600 x 50 609.6 x 73.0 43.0 384.0 13. 4 x 10 4.000 x 10.750 17.0 15.1 71.04 600 x 300 609.6 x 33.9 43.0 397.0 14. 4 x 1 4.000 x 1.750 17.0 15.63 73.4 600 x 350 609.6 x 355.6 43.0 406.0 15.0 4 x 14 4.000x14.000 17.0 16.00 75.0 600 x 400 609.6 x 406.4 43.0 406.0 15.0 4 x 16 4.000 x 16.000 17.0 16.00 75.0 600 x 450 609.6 x 457. 43.0 419.0 17.1 4 x 18 4.000x18.000 17.0 16.50 79.6 600 x 500 609.6 x 508.0 43.0 43.0 18.0 4 x 0 4.000 x 0.000 17.0 17.00 81.60 54 onnect with the est! opyright 011 Shurjoint

WROUGHT GROOVED FITTINGS MODEL W150 WROUGHT ONENTRI REDUER W151 WROUGHT EENTRI REDUER atalog 011 Material: STM 34 Gr. WP, standard weight (0.375 or 9.5mm), or segmentally welded carbon steel of the same or equivalent grade E-E dimensions conform to NSI 16.9. E-E W150 E-E W151 MODEL 57 NIPPLE, Groove X Groove 58 NIPPLE, Groove X evel 59 NIPPLE, Groove X Thread Nominal Pipe Pipe W150 oncentric Reducer W151 Eccentric Reducer Size O.D. E-E Weight E-E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 350 x 150 355.6 x 168.3 330.0 30.8 330.0 30.8 14 x 6 14.000 x 6.65 13.00 67.76 13.00 67.76 350 x 00 355.6 x 19.1 330.0 31.8 330.0 31.8 14 x 8 14.000 x 8.65 13.00 69.96 13.00 69.96 350 x 50 355.6 x 73.0 330.0 3.7 330.0 3.7 14 x 10 14.000 x 10.750 13.00 71.94 13.00 71.94 350 x 300 355.6 x 33.9 330.0 33.6 330.0 33.6 14 x 1 14.000 x 1.750 13.00 73.9 13.00 73.9 400 x 00 406.4 x 19.1 356.0 39.9 356.0 39.9 16 x 8 16.000 x 8.65 14.00 87.78 14.00 87.78 400 x 50 406.4 x 73.0 356.0 41.3 356.0 41.3 16 x 10 16.000 x 10.750 14.00 90.86 14.00 90.86 400 x 300 406.4 x 33.9 356.0 4. 356.0 4. 16 x 1 16.000 x 1.750 14.00 9.84 14.00 9.84 400 x 350 406.4 x 355.6 356.0 43.1 356.0 43.1 16 x 14 16.000 x 14.000 14.00 94.8 14.00 94.8 450 x 50 457. x 73.0 381.0 50.8 381.0 50.8 18 x 10 18.000 x 10.750 15.00 111.76 15.00 111.76 450 x 300 457. x 33.9 381.0 5. 381.0 5. 18 x 1 18.000 x 1.750 15.00 114.84 15.00 114.84 450 x 350 457. x 355.6 381.0 53.5 381.0 53.5 18 x 14 18.000 x 14.000 15.00 117.70 15.00 117.70 450 x 400 457. x 406.4 381.0 54.9 381.0 54.9 18 x 16 18.000 x 16.000 15.00 10.78 15.00 10.78 500 x 300 508.0 x 33.9 508.0 7.6 508.0 7.6 0 x 1 0.000 x 1.750 0.00 159.7 0.00 159.7 500 x 350 508.0 x 355.6 508.0 74.4 508.0 74.4 0 x 14 0.000 x 14.000 0.00 163.68 0.00 163.68 500 x 400 508.0 x 406.4 508.0 76. 508.0 76. 0 x 16 0.000 x 16.000 0.00 167.64 0.00 167.64 500 x 450 508.0 x 457. 508.0 78.0 508.0 78.0 0 x 18 0.000 x18.000 0.00 171.6 0.00 171.6 600 x 400 609.6 x 406.4 508.0 89.8 508.0 89.8 4 x 16 4.000 x 16.000 0.00 197.56 0.00 197.56 600 x 450 609.6 x 457. 508.0 90.7 508.0 90.7 4 x 18 4.000x18.000 0.00 199.54 0.00 199.54 600 x 500 609.6 x 508.0 508.0 9.5 508.0 9.5 4 x 0 4.000 x 0.000 0.00 03.50 0.00 03.50 Model 57 E-E Gr. x Gr. Model 58 E-E Gr. x ev. Model 59 E-E Gr. x Th Nominal Pipe 57 (Gr x Gr) 58 (Gr x ev) 59 (Gr x Th) Pipe Size O.D. E - E Weight E - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 0 6.7 76 0.13 76 0.13 76 0.13 ¾ 1.050 3 0.9 3 0.9 3 0.9 5 33.4 76 0.19 76 0.19 76 0.19 1 1.315 3 0.4 3 0.4 3 0.4 3 4. 10 0.31 10 0.3 10 0.30 1¼ 1.660 4 0.68 4 0.70 4 0.66 40 48.3 10 0.37 10 0.38 10 0.36 1½ 1.900 4 0.8 4 0.84 4 0.79 50 60.3 10 0.50 10 0.50 10 0.50.375 4 1.10 4 1.10 4 1.10 65 73.0 10 0.80 10 0.80 10 0.7 ½.875 4 1.76 4 1.76 4 1.54 80 88.9 10 1.10 10 1.10 10 1.00 3 3.500 4.40 4.40 4.0 100 114.3 15.35 15.35 15.0 4 4.500 6 5.17 6 5.17 6 4.84 15 141.3 15 3.30 15 3.30 15 3.00 5 5.563 6 7.6 6 7.6 6 6.60 150 168.3 15 4.50 15 4.50 15 4.46 6 6.65 6 9.90 6 9.90 6 9.81 00 19.1 15 6.50 15 6.50 --- --- 8 8.65 6 14.30 6 14.30 --- --- 50 73.0 03 1.30 03 8.66 --- --- 10 10.750 8 7.06 8 19.00 --- --- 300 33.9 03 16.0 03 10.16 --- --- 1 1.750 8 35.64 8.35 --- --- onnect with the est! 55 opyright 011 Shurjoint

wrought 3d elbows MODELs L90-3D 90 L60-3D 60 L45-3D 45 L30-3D 30 L-3D ½ L11-3D 11¼ atalog 011 1. Long radius 90 elbows 3D, 5D, and 6D in sizes up to and including 4 are provided with 4 (10 mm) long tangents, sizes 5 to 10 are provided with 1D long tangents and sizes 1 to 4 are provided with 1 (305mm) long tangents.. End Preparation: Roll-grooved to WW 606-04 and or ISO/FDIS 618-1. For dimensional tolerances of cast fittings, refer to ISO/FDIS 618-1 Table 3.. Plain-end or beveled end is also available upon request. 3. Material: Standard wall steel pipe to STM 53, Grade. (Other materials available on request). 4. to E tolerances: through 6 ±1/8 (3.mm); 8 through 16 ±1/4 (6.4mm); 18 through 4 ±3/8 (9.5mm). 5. ll weights are approximate, based on calculated weight of pipe. R=3D L90-3D L60-3D L45-3D L30-3D L-3D L11-3D Nominal Pipe L90-3D 90 Elbow L60-3D 60 Elbow L45-3D 45 Elbow L30-3D 30 Elbow L-3D ½ Elbow L11-3D 11¼ Elbow Size OD - E Weight - E Weight - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 50 60.3 54.5 191.0 165 1.7 146 1.5 133 1.5 114 1.3.375 10.0 5.51 7.50 4.3 6.50 3.75 5.75 3.4 5.5 3. 4.50.8 65 73.0 9 4.5 10 3.5 184 3.0 15.6 140.4 11.1 ½.875 11.5 9.9 8.5 7.7 7.5 6.7 6.00 5.8 5.50 5.3 4.75 4.6 80 88.9 330 6.63 35 5.0 197 4.6 165 3.6 146 3.3 17.8 3 3.500 13.0 14.6 9.5 11.0 7.75 10.14 6.50 8.0 5.75 7.3 5.00 6. 101.6 368 8.4 54 6.5 16 5.6 171 4.6 15 4. 17 3.4 101.6mm.. 4.000 14.5 18.6 10.00 14.4 8.50 1.0 6.75 10. 6.00 9. 5.00 7.6 100 114.3 406 10.18 79 8.4 9 6.69 184 5.8 165 5. 133 4. 4 4.500 16.0.44 11.00 18.5 9.00 14.75 7.5 1.8 6.50 11.4 5.5 9.3 15 141.3 508 18.39 349 14. 86 1.18 9 9.9 03 8.8 165 7. 5 5.563 0.0 40.54 13.75 31.3 11.5 6.85 9.00 1.8 8.00 19.4 6.50 15.8 150 168.3 610 7.5 419.1 343 18 73 15.4 41 13.7 197 11. 6 6.65 4.0 60.67 16.50 48.8 13.50 39.68 10.75 3.9 9.50 30.1 7.75 4.6 00 19.1 813 60 559 44.4 457 39 368 30.8 34 7.4 67.4 8 8.65 3.0 13.8.00 97.9 18.00 85.98 14.50 68.0 1.75 60.5 10.50 49.3 50 73.1 1016 96 69 78.7 57 6 457 54.7 406 48.6 330 39.6 10 10.750 40.0 11.64 7.5 173.4.50 136.69 18.00 10.5 16.00 107. 13.00 87.3 300 33.9 119 145 83 115.6 686 93 55 80.3 489 71.4 394 58. 1 1.750 48.0 319.67 3.75 54.8 7.00 05.03 1.75 177.0 19.5 157.5 15.50 18.3 350 355.6 137 177 97 148.5 800 103.1 641 103.1 57 91.8 464 74.8 14 14.000 54.0 390. 38.5 37.3 31.50 7.3 5.5 7.3.50 0.3 18.5 164.8 400 406.4 154 48 1111 194.6 914 159 737 135.1 648 10.3 57 98.0 16 16.000 60.0 546.75 43.75 49.0 36.00 350.54 9.00 97.9 5.5 65. 0.75 16.0 450 457. 1676 90.6 151 46.9 109 09. 86 171.5 730 15.6 593 14.3 18 18.000 66.0 639. 49.5 544.4 40.5 461.3 3.50 378.1 8.75 336.5 3.35 74.1 500 508.0 189 8 1391 305.5 1143 58 914 1. 813 188.8 660 153.9 0 0.000 7.0 61.7 54.75 673.5 45.00 568.79 36.00 467.8 3.00 416.3 6.00 339. 600 609.6 134 607 1664 441.3 1365 396 1099 306.5 97 7.8 787.3 4 4.000 84.0 1338. 65.50 973.0 53.75 873.03 43.5 675.7 38.5 601.4 31.00 490.0 1 3D 90 elbows ready for shipment 56 onnect with the est! opyright 011 Shurjoint

wrought 5d elbows MODELs L90-5D 90 L60-5D 60 L45-5D 45 L30-5D 30 L-5D ½ L11-5D 11¼ atalog 011 Nominal Pipe L90-5D 90 Elbow L60-5D 60 Elbow L45-5D 45 Elbow L30-5D 30 Elbow L-5D ½ Elbow L11-5D 11¼ Elbow Size OD - E Weight - E Weight - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 50 60.3 356 3.3 48.5 10. 171 1.8 15 1.6 17 1.4.375 14.0 7. 9.75 5.6 8.5 4.8 6.75 4 6 3.6 5 3 65 73 419 6.1 86 4.6 35 3.9 191 3. 165.8 133.3 ½.875 16.5 13.3 11.5 10. 9.5 8.6 7.5 7 6.5 6. 5.5 5 80 88.9 483 9.0 34 6.8 60 5.7 03 4.5 178 4 140 3.1 3 3.500 19.0 19.9 1.75 15 10.5 1.5 8 10 7 8.8 5.5 6.9 101.6 546 1. 311 9.1 86 7.5 5.9 191 5.1 146 3.9 101.6mm.. 4.000 1.5 6.9 1.5 0 11.5 16.5 8.75 13 7.5 11.3 5.75 8.7 100 114.3 610 16.1 394 11.8 318 9.7 41 7.5 03 6.5 15 4.9 4 4.500 4.0 35.4 15.5 6 1.5 1.3 9.5 16.6 8 14.3 6 10.7 15 141.3 76 7. 495 0 394 16.4 98 1.7 54 10.9 191 8.3 5 5.563 30.0 59.9 19.5 44.1 15.5 36.1 11.75 8.1 10 4.1 7.5 18. 150 168.3 914 4.4 591 31.1 470 5.5 356 19.9 305 17.1 9 1.8 6 6.65 36.0 93.3 3.5 68.6 18.5 56. 14 43.8 1 37.6 9 8.3 00 19.1 119 85. 787 6.5 6 51. 476 39.9 406 34. 305 5.8 8 8.65 48.0 187.4 31 137.7 4.5 11.8 18.75 87.9 16 75.4 1 56.8 50 73.1 154 150.9 991 110.7 781 90.7 597 70.7 508 60.6 381 45.6 10 10.750 60.0 33.0 39 44.1 30.75 199.9 3.5 155.8 0 133.7 15 100.6 300 33.9 189 1.8 1187 16.7 940 133. 711 103.8 610 89.1 457 67 1 1.750 7.0 488.0 46.75 358.6 37 93.7 8 8.9 4 196.4 18 147.8 350 355.6 083 76.6 1384 09 109 171.1 83 133.4 711 114.4 533 86.1 14 14.000 8.0 608.5 54.5 460.7 43 377.3 3.75 94 8 5.3 1 189.8 400 406.4 337 354.4 1581 73.9 151 4.3 953 174.8 813 150 610 11.9 16 16.000 9.0 779.7 6.5 603.8 49.5 494.5 37.5 385.3 3 330.7 4 48.8 450 457. 591 441.5 1778 347.5 1403 84.7 1073 1.8 914 190.4 686 143. 18 18.000 10.0 971.4 70 766. 55.5 67.6 4.5 489 36 419.7 7 315.7 500 508.0 845 538.6 1975 430 156 35. 1187 74.4 1016 35.5 76 177. 0 0.000 11.0 1184.9 77.75 947.9 61.5 776.4 46.75 605 40 519. 30 390.6 600 609.6 3353 761.3 369 61.1 1873 508.7 149 396.4 119 340. 908 56 4 4.000 13.0 1674.9 93.5 1369.3 73.75 111.6 56.5 873.9 48 750.1 35.75 564.3 wrought 6d elbows MODELs L90-6D 90 L60-6D 60 L45-6D 45 L30-6D 30 L-6D ½ L11-6D 11¼ Nominal Pipe L90-6D 90 Elbow L60-6D 60 Elbow L45-6D 45 Elbow L30-6D 30 Elbow L-6D ½ Elbow L11-6D 11¼ Elbow Size OD - E Weight - E Weight - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 50 60.3 406 3.7 79.9 9.4 184 165 1.8 133 1.5.375 16.0 8. 11 6.3 9 5.3 7.5 4.3 6.5 3.9 5.5 3. 65 73 483 6.9 34 5. 60 4.3 03 3.5 178 3 140.4 ½.875 19.0 15. 1.75 11.4 10.5 9.5 8 7.7 7 6.7 5.5 5.3 80 88.9 559 10.4 368 7.7 38 6.4 5 191 4.3 146 3.3 3 3.500.0.9 14.5 17 1.5 14 8.75 11 7.5 9.5 5.75 7.3 101.6 635 14.1 413 10.3 34 8.4 48 6.5 10 5.6 15 4. 101.6mm.. 4.000 5.0 31.1 16.5.8 1.75 18.6 9.75 14.4 8.5 1.3 6 9. 100 114.3 711 18.6 457 13.5 356 10.9 67 8.4 7.1 165 5. 4 4.500 8.0 41.0 18 9.8 14 4.1 10.5 18.5 8.75 15.7 6.5 11.4 15 141.3 889 31.6 565.9 445 18.6 330 14. 79 1 03 8.8 5 5.563 35.0 69.5.5 50.5 17.5 40.9 13 31.3 11 6.5 8 19.4 150 168.3 1067 49. 679 35.7 533 8.9 400.1 337 18.7 41 13.7 6 6.65 4.0 108. 6.75 78.6 1 63.7 15.75 48.8 13.5 41.3 9.5 30.1 00 19.1 14 98.7 908 71.5 711 58 533 44.4 445 37.6 34 7.4 8 8.65 56.0 17. 35.75 157.7 8 17.8 1 97.9 17.5 8.9 1.75 60.5 50 73.1 1778 174.9 1137 16.7 889 10.7 660 78.7 559 66.6 406 48.6 10 10.750 70.0 384.9 44.75 79.4 35 6.4 6 173.4 146.9 16 107. 300 33.9 134 57. 1359 186. 1060 150.9 794 115.6 667 97.9 483 71.4 1 1.750 84.0 565.8 53.5 410.5 41.75 33.7 31.5 54.8 6.5 15.9 19 157.5 350 355.6 438 3.0 1588 39. 138 193.8 97 148.5 781 15.8 565 91.8 14 14.000 96.0 708.4 6.5 57.3 48.75 47.3 36.5 37.3 30.75 77.3.5 0.3 400 406.4 743 413.9 1816 313.5 1416 54.1 1060 194.6 895 164.9 648 10.3 16 16.000 108.0 910.6 71.5 691.1 55.75 560.1 41.75 49 35.5 363.5 5.5 65. 450 457. 3048 517.0 045 397.8 1594 3.4 1194 46.9 1003 09. 730 15.6 18 18.000 10.0 1137.4 80.5 877.1 6.75 710.7 47 544.4 39.5 461.3 8.75 336.5 500 508.0 3353 63.0 67 49. 177 398.8 137 305.5 1118 58.9 806 188.8 0 0.000 13.0 1390.4 89.5 1085.1 69.75 879.3 5.5 673.5 44 570.7 31.75 416.3 600 609.6 396 896.4 74 711 17 576. 1588 441.3 139 373.9 97 7.8 4 4.000 156.0 197.1 107.5 1567.5 83.75 170.3 6.5 973 5.34 84.4 38.5 601.4 onnect with the est! 57 opyright 011 Shurjoint

EXTR HEVY UT GROOVEd FITTINGS "EP" (End Protection) MODEL 10EP 90 EP ELOW 11EP 45 EP ELOW 0EP EP Tee 35EP EP cross atalog 011 Shurjoint offers a variety of fittings with extra heavy (Sch. 80) wall thickness and "EP" cut grooves available for use with XH-70EP couplings. These fittings must be used with XH-70EP couplings in high pressure systems where the system pressure exceeds the published ratings for XH-1000 or Model 7707 couplings. #10EP #0EP..#11EP..#35EP Nominal Pipe #10EP 90 Elbows #11EP 45 Elbows #0EP Tee #35EP ross Size O. D. - E Weight - E Weight - E Weight - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 50 60.3 83 1.0 51 0.8 83 1.6 83 1.8.375 3.5..00 1.8 3.5 3.5 3.5 3.9 65 73.0 95 1.7 57 1.3 95 3.6 95 3.0 ½.875 3.75 3.8.5.9 3.75 7.9 3.75 6.6 80 88.9 108.7 64 1.9 108 7.3 108 6.4 3 3.500 4.5 5.9.50 4.3 4.5 16.0 4.5 14. 100 114.3 17 4.4 76 3.9 17 10.7 17 7. 4 4.500 5.00 9.7 3.00 8.5 5.00 3.5 5.00 15.8 150 168.3 165 10.4 89 7.5 165 1. 165 0.9 6 6.65 6.50.9 3.50 16.5 6.50 7.0 6.50 46.0 For "EP cut-grooves, see page 6. MODEL EP HEDER TEE Shurjoint Model EP Header Tees are specifically designed for use in oilfield production headers where the top (test) line is " (50mm) and the bottom production line is 3" (80mm) or 4" (100mm). #EP Working Pressure (STD, Roll-grooved) Max. Service Temperature 750 psi @100 F EPDM: 30 F / 110 lass 300.. 5 ar @38 Nitrile: 180 F / 8 *Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Fitting Size Mated to E #EP Header Tee Nominal Size Pipe O. D. - E Weight mm / in mm / in mm / in Kgs / Lbs 50 to 80 60.3 108 1.5 to 3.375 4.5 3.4 50 to 100 73.0 17 1.9 to 4.875 5.00 4.1 58 onnect with the est! opyright 011 Shurjoint

Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 60 Grooved Mechanical ouplings SS-5 Rigid oupling... 61 SS-7 Rigid oupling... 6 SS-7X Rigid oupling... 63 SS-8 Flexible oupling... 64 SS-8X Heavy Duty Flexible oupling... 65 SS-100 High Pressure Flexible oupling... 66 SS-8 Hinged Lever oupling... 67 ast Grooved Fittings SS-10 / SS-11 / SS-0 / SS-60 Elbows, Tee, ap... 68 SS-1 / SS 50 Reducing Tee, oncentric Reducer... 69 Wrought Grooved Fittings WS-10 / WS-10L / WS-11 / WS-0 / WS -60 / WS-1 / WS-50 Elbows, Tee, ap, Reducing Tee & oncentric Reducer...70 Flange dapters SS-41 / SS-80 Flange dapters... 71 Mechanical Tee, Y-Strainer & Valves SS-73 / SS-76 Mechanical Tee, Y Strainer... 7 SJ-600L / SJ-600W all Valves... 73 SJ-400-L / SJ-400-W utterfly Valve... 74 onnect with the est! atalog 011

Stainless Steel Series atalog 011 Shurjoint offers a full range of stainless steel grooved mechanical couplings in F8 (304) and F8M (316) for general service applications and in specialty alloys for applications including reverse osmosis and desalination systems. Grooved fittings are available in sizes from 1 (5 mm) to 4 (600 mm) produced in a combination of investment castings and wrought stainless. The design pressure rating of Shurjoint stainless steel grooved couplings follows lass 150 and is based on roll grooved Sch. 40S pipe. Pressure ratings will vary depending on the type of pipe used and grooves processed. For example; for cut grooved Sch. 40S pipe - apply 110%, for roll grooved Sch.10S pipe - apply 80% and for rollgrooved Sch. 5S pipe - apply 50%. Shurjoint Model SS-100 and Model SS-8X are designed for high pressure applications for use with cut-grooved Sch. 40S and or Sch. 80S pipe with pressures expressed in WP. Shurjoint ductile iron couplings can be used in conjunction with stainless steel pipe, depending on the application, as the flow media does not come in direct contact with coupling housings but rather only the gasket. See page 39 for performance data. Stainless steel pipe in general is more difficult to groove than carbon steel pipe, as it is more difficult to achieve defined groove corners on stainless pipe. Grooves that are not defined and have too much of a radius could result in joint failure. are must be taken to process grooves as defined as possible. For this reason, roll-groove machine manufacturers offer a variety of roll sets depending on the pipe material and wall thickness being grooved. lways select the correct roll set for the pipe being grooved. Groove corners are not defined OK If the same roll-set that has been used for carbon steel pipe is used on stainless steel pipe, rust or scale may be transferred to the stainless steel pipe during processing of the groove. Thus we recommend the use of a separate roll set specifically for use with stainless steel pipe. lso use caution to keep roll grooved stainless steel pipe dry prior to installation. Stainless Steel asting Specifications ustenitic Stainless Steel Duplex (ustenitic / Ferritic) Stainless Steel Grade F8 F8M K3MuN, E8MN 4, D3MN 5, E3MN (UNS) J9600 J9900 J9354 J93345 J905 J93404 omposition, % (max, except where range is given) arbon 0.08 0.08 0.05 0.08 0.03 0.03 Manganese 1.50 1.50 1.0 1.00 1.50 1.50 Silicon.00 1.50 1.00 1.50 1.00 1.00 Sulfur 0.040 0.040 0.010 0.040 0.00 0.040 Phosphorus 0.040 0.040 0.045 0.040 0.040 0.040 hromium 18.0-1.0 18.0-1.0 19.5-0.5.5-5.5 1.0-3.5 4.0-6.0 Nickel 8.0-11.0 9.0-1.0 17.5-19.5 8.0-11.0 4.5-6.5 6.0-8.0 Molybdenum 0.50.0-3.0 6.0-7.0 3.0-4.5.5-3.5 4.0-5.0 Nitrogen.. 0.18-0.4 0.10-0.30 0.10-0.30 0.10-0.30 opper.. 0.50-1.00. 1.00 Tensile Requirements, min. Tensile Strength, ksi (MPa) 70 (485) 70 (485) 80 (550) 95 (655) 90 (60) 100 (690) Yield Strength, ksi (MPa) 30 (05) 30 (05) 38 (60) 65 (450) 60 (415) 75 (515) Elongation, % 35 30 35 5 5 18 STM Standards 351/ 743/744 351/743/744 351/743/744 890/351 890 890 Wrought Equivalent Grade 304 316 54SMO* 45D* 05 SF 507* * 54SMO is a registered trademark of vestapolarit, 45D is a registered trademark of ESO orporation and SF 507 is a registered trademark of Sandvik Steel.. 60 onnect with the est! opyright 011 Shurjoint

SS-5 RIGID OUPLING - ngle-pad Design - atalog 011 The Shurjoint Model SS-5 is an angle-pad design stainless steel coupling for use with Sch. 5S, Sch. 10S or Sch. 40S stainless steel pipe where a rigid connection is desired. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so called snaking of a long straight run. With the removal of only one bolt you can make a fast and easy "swingover installation. The SS-5 couplings are comprised of two identical F8 (304) or F8M (316) housing segments, EPDM gaskets and stainless steel track bolts and heavy duty nuts. The Shurjoint Model SS-5 is available with a standard shaped or GapSeal gasket in a variety of grades to meet your specific service requirements. Working Pressure Max. Service (STD, Roll-Grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Max. Working Max. End xial Dimensions olts Size Size O. D. Pressure Load Displacement Weight mm / in mm / in ar/psi kn / Lbs mm / in mm / in mm / in mm / in No. mm / in Kgs / Lbs 3 4. 0.80 0 ~ 1. 66 10 46 M10 x 55 0.6 1¼ 1.660 300 650 0 ~ 0.05.60 4.00 1.81.. ⅜ x ⅛ 1.4 40 48.3 0 3.66 0 ~ 1. 7 109 46 M10 x 55 0.7 1½ 1.900 300 850 0 ~ 0.05.83 4.9 1.81.. ⅜ x ⅛ 1.5 50 60.3 0 5.71 0 ~ 1.7 85 117 47 M10 x 70 0.8.375 300 1330 0 ~ 0.07 3.35 4.61 1.85.. ⅜ x ¾ 1.7 65 73.0 0 8.37 0 ~ 1.7 98 13 47 M10 x 70 0.9 ½.875 300 1950 0 ~ 0.07 3.86 5.0 1.85.. ⅜ x ¾.1 76.1 0 9.09 0 ~ 1.7 100 136 47 M10 x 70 1.0 76.1mm.. 3.000 300 10 0 ~ 0.07 3.94 5.35 1.85.. ⅜ x ¾. 80 88.9 0 1.41 0 ~ 1.7 113 148 48 M10 x 70 1. 3 3.500 300 080 0 ~ 0.07 4.45 5.83 1.88.. ⅜ x ¾.6 100 114.3 0 0.51 0 ~ 4.1 146 18 53 M10 x 70 1.9 4 4.500 300 4770 0 ~ 0.16 5.75 7.17.09.. ⅜ x ¾ 4.1 139.7 0 30.64 0 ~ 4.1 173 7 53 M1 x 75.6 139.7mm.. 5.500 300 710 0 ~ 0.16 6.81 8.94.09.. ½ x 3 5.7 15 141.3 0 31.35 0 ~ 4.1 175 9 53 M1 x 75.6 5 5.563 300 790 0 ~ 0.16 6.89 9.0.09.. ½ x 3 5.7 165.1 0 4.80 0 ~ 4.1 00 46 54 M1 x 75 3.1 165.1mm.. 6.500 300 9950 0 ~ 0.16 7.87 9.69.13.. ½ x 3 6.8 150 168.3 0 44.47 0 ~ 4.1 03 49 54 M1 x 75 3.1 6 6.65 300 10340 0 ~ 0.16 8.00 9.80.13.. ½ x 3 6.8 00 19.1 0 75.37 0 ~ 4.8 64 330 64 M16 x 135 6.1 8 8.65 300 1750 0 ~ 0.19 10.40 1.99.5.. ⅝ x 5 5/16 13.4 16.3 0 73.45 0 ~ 4.8 60 340 64 M0 x 10 7.4 00 JIS.. 8.516 300 17080 0 ~ 0.19 10.4 13.39.50.. ¾ x 4¾ 16. onnect with the est! 61 opyright 011 Shurjoint

SS-7 STINLESS STEEL Rigid oupling atalog 011 The Model SS-7 is a tongue and groove rigid coupling designed for a variety of moderate service pressure applications. The SS-7 is supplied standard in F8 (304) and F8M (316) with 304 and 316 bolts and nuts. SS-7 couplings should always be installed so that the coupling bolt pads make metal to metal contact. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Pipe End Dimensions olt Size O. D. Separation Size Weight mm / in mm / in mm / in mm / in mm / in mm / in in Kgs / Lbs 3 4. 0-1.6 68 105 45 0.7 ⅜ x 1¼ 1.660 0-0.06.68 4.13 1.75. 1.5 40 48.3 0-1.6 74 108 46 0.8 ⅜ x 1½ 1.900 0-0.06.91 4.5 1.81. 1.8 50 60.3 0-1.6 86 15 46 0.9 ⅜ x.375 0-0.06 3.39 4.9 1.81..0 65 73.0 0-1.6 100 138 46 0.8 ⅜ x ½.875 0-0.06 3.94 5.43 1.81. 1.8 76.1 0-1.6 100 143 46 1.0 76.1 mm ⅜ x.. 3.000 0-0.06 3.94 5.63 1.81.. 80 88.9 0-1.6 11 160 46 1. ⅜ x 3 3.500 0-0.06 4.41 6.30 1.81..6 100 114.3 0-3. 143 07 51.1 ½ x 3 4 4.500 0-0.13 5.63 8.15.00. 4.6 139.7 0-3. 17 31 51.8 139.7 mm ½ x 3.. 5.500 0-0.13 6.77 9.09.00. 6. 15 141.3 0-3. 171 36 51.7 ½ x 3 5 5.563 0-0.13 6.73 9.9.00. 5.9 165.1 0-3. 195 55 53 3.1 165.1 mm ½ x 3.. 6.500 0-0.13 7.68 10.04.09. 6.8 150 168.3 0-3. 01 56 51 3.1 ½ x 3 6 6.65 0-0.13 7.91 10.08.00. 6.8 00 19.1 0-3. 64 333 6 6.4 ⅝ x 3½ 8 8.65 0-0.13 10.39 13.11.44. 14.1 16.3 0-3. 57 346 6 6.0 00 JIS ⅝ x 3½.. 8.516 0-0.13 10.1 13.6.44. 13. The tongue and groove style rigid coupling may allow for rotation when installed on undersized grooves. Domestic Water Service 6 onnect with the est! opyright 011 Shurjoint

SS-7X STINLESS STEEL Rigid oupling atalog 011 The Model SS-7X is a tongue and groove rigid coupling designed to provide a rigid joint for stainless steel pipe in sizes 10 through 4. The SS-7X is supplied standard in F8 (304) and F8M (316) with 304 and 316 bolts and nuts. The bolts must be fastened to the required torque for proper installation. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum times the working pressure. 10" ~ 14" 16" ~ 18" 0" ~ 4" Nominal Pipe Pipe End Dimensions olt olt Size O. D. Separation Size Torque Weight mm / in mm / in mm / in mm / in mm / in mm / in No. in N-m / Lbs-Ft Kgs / Lbs 50 73.0 0-3. 318 406 65 145 35 10.5 ⅞ x 6½ 10 10.750 0-0.13 1.5 15.98.56.. 105-175 3.1 300 33.9 0-3. 374 45 65 145 35 11.5 ⅞ x 6½ 1 1.750 0-0.13 14.7 17.78.56.. 105-175 3.3 67.4 0-3. 316 45 64 145 35 8.5 50 JIS ⅞ x 6½. 10.58 0-0.13 1.44 16.73.5.. 105-175 18.7 318.5 0-3. 370 465 64 145 35 9.8 300 JIS ⅞ x 6½. 1.539 0-0.13 14.57 18.31.5.. 105-175 1.6 350 355.6 0-3. 397 500 75 145 35 15.0 ⅞ x 6½ 14 14.000 0-0.13 15.63 19.69.95.. 105-175 33.0 400 406.4 0-3. 461 536 75 68-100 19.4 6 ⅞ x 3½ 16 16.000 0-0.13 18.15 1.10.95.. 50-75 4.7 450 457. 0-3. 514 587 75 68-100 5.0 6 ⅞ x 3½ 18 18.000 0-0.13 0.4 3.11.95.. 50-75 55.0 500 508.0 0-3. 571 669 79 85 00 33.1 8 ¾ x 4¾ 0 0.000 0-0.13.48 6.34 3.11.. 65-150 7.8 550 558.8 0-3. 6 70 79 85 00 33.0 8 ¾ x 4¾.000 0-0.13 4.49 8.35 3.11.. 65-150 7.6 600 609.6 0-3. 673 771 79 85 00 34.7 8 ¾ x 4¾ 4 4.000 0-0.13 6.47 30.35 3.11.. 65-150 76.3 ir onditioning onnect with the est! 63 opyright 011 Shurjoint

SS-8 STINLESS STEEL Flexible oupling atalog 011 The Model SS-8 is a flexible coupling designed for a variety of general service and specialty applications. The SS-8 is supplied standard in F8 (304) and F8M (316) with 304 or 316 bolts and nuts. SS-8 couplings should always be installed so that the coupling bolt pads make metal to metal contact. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Pipe End Dimensions Deflection olt Size O. D. Separation Degree Size Weight mm / in mm / in mm / in mm / in mm / in mm / in ( ) in Kgs / Lbs 5 33.4 0-1.6 55.7 87.5 44.0-45 5 0.5 /16 x1½ 1 1.315 0-0.06.19 3.45 1.73.. 1.1 3 4. 0-1.6 64.6 97.8 44.0-10 5 0.5 /16 x1½ 1¼ 1.660 0-0.06.54 3.85 1.73.. 1.1 40 48.3 0-1.6 70.8 105.1 44.0 1-54 5 0.5 /16 x1½ 1½ 1.900 0-0.06.79 4.14 1.73.. 1.1 50 60.3 0-1.6 83.0 14.0 44.0 0.7 1-31 ⅜ x.375 0-0.06 3.8 4.88 1.73.. 1.5 65 73.0 0-1.6 96. 139.9 44.0 0.8 1-15 ⅜ x ½.875 0-0.06 3.79 5.51 1.73.. 1.8 76.1 0-1.6 99.0 145.0 44.0 0.8 76.1mm 1-1 ⅜ x.. 3.000 0-0.06 3.91 5.71 1.73.. 1.8 80 88.9 0-1.6 111.0 157.0 44.0 1.0 1-0 ⅜ x 3 3.500 0-0.06 4.39 6.18 1.73... 100 114.3 0-3. 143.0 00.0 50.0 1.7 1-36 ½ x 3 4 4.500 0-0.13 5.6 7.87 1.97.. 3.7 139.7 0-3. 171.0 31.0 50.0. 139.7mm 1-18 ½ x 3.. 5.500 0-0.13 6.73 9.09 1.97.. 4.8 15 141.3 0-3. 170.8 6.1 50.0. 1-18 ½ x 3 5 5.563 0-0.13 6.7 8.90 1.97.. 4.8 165.1 0-3. 194.0 53.0 53.0.7 165.1mm 1-07 ½ x 3.. 6.500 0-0.13 7.67 9.96.09.. 5.9 150 168.3 0-3. 198.0 53.1 53.0.9 1-05 ½ x 3 6 6.65 0-0.13 7.80 9.96.09.. 6.4 00 19.1 0-3. 55.0 337.0 6.0 6.4 0-50 ⅝ x 3½ 8 8.65 0-0.13 10.04 13.7.44.. 14.1 16.3 0-3. 51.0 346.0 60.0 5.1 00 JIS 0-51 ⅝ x 3½.. 8.516 0-0.13 10.00 13.6.40.. 11.3 64 onnect with the est! opyright 011 Shurjoint

SS-8X Stainless Steel Heavy Duty Flexible oupling atalog 011 The Model SS-8X is designed for high pressure applications including reverse osmosis and desalination systems. The SS-8X is available in Duplex D3MN (05), Super Duplex E8MN, E3MN (507) and 6-Moly stainless steel K3MuN (54SMO*). The SS-8X features 316 bolts, washers and Silicon ronze nuts to help prevent galling during repetitive use. The SS-8X is also available in F8M (316) with 316 bolts and nuts. ontact Shurjoint for details. Size Working Pressure Test Pressure Max. Service (S40S, ut-grooved) (Hydrostatic) Temperature 3/4 4 WP 1400 psi @100 F 100 psi 0-100. 98 ar @38 147 ar EPDM: 30 F / 110 5 8 WP 1000 psi @100 F 1500 psi Nitrile: 180 F / 8 15-00. 70 ar @38 10.5 MPa *Working pressure is based on cut-grooved Sch. 40S or 80S pipe only. *urst pressure is engineered minimum times the working pressure.s Nominal Pipe Pipe End Dimensions Deflection olt Size O. D. Separation Degree Size Weight mm / in mm / in mm / in mm / in mm / in mm / in ( ) in Kgs / Lbs 0 6.7 0-1.6 56.0 95.0 46.0 0.7 3-3 ⅜ x ¾ 1.050 0-0.06.0 3.75 1.81.. 1.5 5 33.4 0-1.6 63.0 99.0 46.0 0.8-45 ⅜ x 1 1.315 0-0.06.45 3.91 1.81.. 1.8 3 4. 0-1.6 7.0 111.0 46.0 0.9-10 ⅜ x 1¼ 1.660 0-0.06.8 4.37 1.81...0 40 48.3 0-1.6 78.0 13.0 46.0 1.0 1-54 ⅜ x 1½ 1.900 0-0.06 3.06 4.8 1.81... 50 60.3 0-1.6 88.0 134.0 47.0 1. 1-31 ⅜ x.375 0-0.06 3.46 5.8 1.85...6 65 73.0 0-1.6 153.0 103.0 47.0 1.3 1-15 ⅜ x ½.875 0-0.06 6.0 4.06 1.85...9 80 88.9 0-1.6 10.0 171.0 47.0 1.8 1-0 ½ x 3 3 3.500 0-0.06 4.71 6.74 1.85.. 4.0 100 114.3 0-3. 15.0 01.0 5.0.4 1-36 ½ x 3 4 4.500 0-0.13 5.98 7.90.03.. 5.3 15 141.3 0-3. 181.0 49.0 53.0 3.5 1-18 ⅝ x 3½ 5 5.563 0-0.13 7.13 9.80.09.. 7.7 150 168.3 0-3. 08.0 76.0 53.0 4.0 1-05 ⅝ x 3½ 6 6.65 0-0.13 8.19 10.85.09.. 8.8 00 19.1 0-3. 67.0 341.0 6.0 6.8 0-50 ¾ x 4¾ 8 8.65 0-0.13 10.53 13.43.44.. 15.0 16.3 0-3. 64.0 338.0 6.0 6.5 00 JIS 0-51 ¾ x 4¾.. 8.516 0-0.13 10.39 13.31.44.. 14.3 Working pressure ratings are based upon generally accepted pressure piping design standards and testing in accordance with SME Section VIII Division 1 pressure vessel test methods. Reverse osmosis plant onnect with the est! 65 opyright 011 Shurjoint

SS-100 Stainless Steel High Pressure Flexible oupling atalog 011 The Model SS-100 is designed for high pressure applications including reverse osmosis, desalination and other specialty systems. The SS-100 is available in strong and anti-corrosive alloys of Duplex D3MN (05), Super Duplex E8MN, E3MN (507) and 6-Moly stainless steel K3MuN (54SMO*). The SS-100 features 316 bolts, washers and Silicon ronze nuts to help prevent galling during repetitive use. Working Pressure Test Pressure Max. Service (S40S, ut- or Roll-grooved) (Hydrostatic) Temperature 100 psi @100 F 1800 psi EPDM: 30 F / 110 WP. 84 ar @38 16 ar Nitrile: 180 F / 8 *Working pressure is based on cut-grooved Sch. 40S or 80S pipe only. *urst pressure is engineered minimum times the working pressure. Nominal Pipe Pipe End Dimensions Deflection olt Size Size O. D. Separation Degree Weight mm / in mm / in mm / in mm / in mm / in mm / in ( ) No. in Kgs / Lbs 0 6.7 0-1.6 53 94 46 0.45 3-3 ⅜ x ¾ 1.050 0-0.06.09 3.70 1.81... 0.99 5 33.4 0-1.6 60 101 46 0.55-45 ⅜ x 1 1.315 0-0.06.36 3.98 1.81... 1.1 3 4. 0-1.6 70 111 46 0.63-10 ⅜ x 1¼ 1.660 0-0.06.76 4.37 1.81... 1.39 40 48.3 0-1.6 76 117 46 0.70 1-54 ⅜ x 1½ 1.900 0-0.06.99 4.61 1.81... 1.54 50 60.3 0-1.6 88 137 49 1.04 1-31 ½ x 3.375 0-0.06 3.46 5.39 1.85....9 65 73.0 0-1.6 10 151 49 1.38 1-15 ½ x 3 ½.875 0-0.06 4.0 5.94 1.85... 3.04 80 88.9 0-1.6 119 168 49 1.55 1-0 ½ x 3 3 3.500 0-0.06 4.69 6.61 1.85... 3.41 100 114.3 0-3. 15 07 5.13 1-36 ⅝ x 3½ 4 4.500 0-0.13 5.98 8.15.03... 4.69 Working pressure ratings are based upon generally accepted pressure piping design standards and testing in accordance with SME Section VIII Division 1 pressure vessel test methods. The Shurjoint Fast-Fit gasket has been designed and engineered for easier and faster installations. The pipe-end friendly design eliminates struggling to stretch the gasket over the pipe ends and the Fast-Fit gasket also features Shurjoint s Gap-Seal technology, which seals the gap between the pipe ends and eliminates stagnant water pockets within the gasket cavity. The Fast- Fit gasket is UL classified in accordance with NSI/NSF 61 for potable water (old Water +86 F / 30 and Hot Water +180 F / +8 ). lways use the factory supplied Shurjoint Fast-Fit gasket. Performance standards do not support the use of a standard gasket in the SS-100 coupling. Fast-Fit Gasket: Easy installation with a single hand * 54SMO is a registered trademark of vestapolarit. lways use the Shurjoint Fast-fit gasket. Don't use a standard gasket with the SS- 100 coupling. 66 onnect with the est! opyright 011 Shurjoint

SS-8 Stainless Steel HINGED LEVER OUPLING atalog 011 The Model SS-8 Hinged Grooved oupling is designed for quick connect and disconnect services. The housing segments are hinged with a lever handle for easy assembly. Use of the split pin can prevent the accidental opening of the coupling. The Model SS-8 can be used in a wide variety of applications with standard roll- or cut- grooved pipe. Housings 40mm - 100mm (1½ - 4 ) feature a smooth outer surface, housings 15mm - 300mm (5-1 ) feature a cross-ribbed design for added strength. Standard gasket: Grade E EPDM or Grade T Nitrile. vailable standard in F8 (304) or F8M (316). Working Pressure Max. Service (STD, Roll-Grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 *The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. *Proof test pressure: 1.5 times the working pressure, non-shock cold water. *urst pressure is engineered minimum 3 times the working pressure. split pin Nominal Pipe Max. Working xial Dimensions Deflection Size O. D. Pressure Displacement Degree Weight mm / in mm / in ar / PSI mm / in mm / in mm / in mm / in ( ) Kgs / Lbs 40 48.3 0 0 1.6 75 118 47 1.0 3º - 48' 1½ 1.900 300 0 0.06.95 4.65 1.85.. 50 60.3 0 0 1.6 86 11 48 1.1 3º - 31'.375 300 0 0.06 3.39 4.76 1.89..4 65 73.0 0 0 1.6 9 150 48 1.4 º - 30' ½.875 300 0 0.06 3.6 5.91 1.89. 3.1 76.1 0 0 1.6 9 150 48 1.4 76.1mm º - 4'.. 3.000 300 0 0.06 3.6 5.91 1.89. 3.1 80 88.9 0 0 1.6 119 163 48 1.8 º - 4' 3 3.500 300 0 0.06 4.69 6.4 1.89. 4.0 100 114.3 0 0 3. 165 05 5.7 3º - 1' 4 4.500 300 0 0.13 6.50 8.07.05. 5.9 15 139.7 0 0 3. 189 53 5 4.9 º - 37' 5 5.500 300 0 0.13 7.44 9.96.05. 10.8 15 141.3 0 0 3. 189 53 5 4.9 º - 36' 5 5.563 300 0 0.13 7.44 9.96.05. 10.8 165.1 0 0 3. 13 78 5 5.8 165.1mm º - 14'.. 6.500 300 0 0.13 8.39 10.94.05. 1.8 150 168.3 0 0 3. 16 81 5 5.8 º - 10' 6 6.65 300 0 0.13 8.50 11.06.05. 1.8 *Deflection or angular movement is the maximum value that a coupling allows under no internal pressure. Expansion Pipe Lever handles are factory assembled tight for safety. The use of an expansion pipe will aid the easy opening and closing. Expansion pipes are available upon request. onnect with the est! 67 opyright 011 Shurjoint

ST GROOVED FITTINGS MODEL SS-10 90 ELOW SS-11 45 ELOW MODEL SS-0 TEE SS-60 P atalog 011 The Shurjoint Model SS-10, SS-11, SS-0 and SS-60 stainless steel grooved fittings are investment cast in sizes 1" - 1". These fittings are supplied in STM 351 or 743 austenitic grades F8 (304) and F8M (316). In addition fittings are also available on request in F3M (316L), 316Ti, 05 Duplex, 507 Super Duplex and STM K-3MuN (UNS J9345) the cast equivalent to 54SMO * to meet your specific service requirements. ll cast fittings feature full flow characteristics and are designed to the same - E dimensions of standard ductile iron grooved fittings. Size Working Pressure (STD, Roll-grooved) Max. Service Temperature 1-4 750 psi @100 F lass 300 5-100.. 5 ar @38 EPDM: 30 F / 110 5 1 400 psi @100 F Nitrile: 180 F / 8 lass 50 15-300.. 8 ar @38 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. E-E E-E Nominal Pipe SS-10 90 Elbow SS-11 45 Elbow SS-0 Tee SS-60 ap Size O. D. - E Weight - E Weight - E Weight E - E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 5 33.4 57 0.3 45 0. 57 0.4 4 0.1 1 1.315.5 0.7 1.75 0.4.5 0.9 0.94 0. 3 4. 70 0.4 45 0.3 70 0.7 4 0.1 1¼ 1.660.75 0.9 1.75 0.7.75 1.5 0.94 0. 40 48.3 70 0.4 45 0.4 70 0.8 4 0. 1½ 1.900.75 0.9 1.75 0.9.75 1.8 0.94 0.4 50 60.3 83 0.6 51 0.5 83 1.1 4 0..375 3.5 1.3.00 1.1 3.5.4 0.94 0.4 65 73.0 95 1.4 57 1.0 95.5 45 0.4 ½.875 3.75 3.1.5. 3.75 5.5 1.75 0.9 76.1 95 1.6 57 1.0 95.5 45 0.4 76.1 mm.. 3.000 3.75 3.5.5. 3.75 5.5 1.75 0.9 80 88.9 108 1.3 64 1.0 108.1 51 0.7 3 3.500 4.5.9.50. 4.5 4.6.00 1.5 100 114.3 17. 76 1.6 17 3.4 51 0.9 4 4.500 5.00 4.8 3.00 3.5 5.00 7.5.00.0 139.7 140 3.9 83.8 140 5.6 60 1.6 139.7 mm.. 5.500 5.50 8.6 3.5 6. 5.50 1.3.38 3.5 15 141.3 140 3.9 83.9 140 5.8 60 1.5 5 5.563 5.50 8.6 3.5 6.4 5.50 1.8.38 3.3 165.1 165 6. 89 4.1 165 9.0 76.6 165.1 mm.. 6.500 6.50 13.6 3.50 9.0 6.50 19.8 3.00 5.7 150 168.3 165 6.5 89 4. 165 9.7 76.4 6 6.65 6.50 14.3 3.50 9. 6.50 1.3 3.00 5.3 00 19.1 197 10.7 108 7.1 197 18.8 90 5. 8 8.65 7.75 3.5 4.5 15.6 7.75 41.4 3.50 11.4 50 73.0 9 9.0 11 16.8 9 1.1 17 10. 10 10.750 9.00 63.8 4.75 37.0 9.00 46.4 5.00.4 300 33.9 54 38.0 133 19.6 54 43.0 145 14.7 1 1.750 10.00 83.6 5.5 43.1 10.00 94.6 5.71 3.3 16.3 197 10.7 108 7.1 197 13.8 90 5. 00 JIS.. 8.516 7.75 3.5 4.5 15.6 7.75 30.4 3.50 11.4 67.4 38 9.0 11 16.8 9 19.8 17 8.9 50 JIS.. 10.58 9.37 63.8 4.75 37.0 9.00 43.6 5.00 19.6 318.5 310 1.7 133 19.6 54 7.1 145 14.7 300 JIS.. 1.539 1.0 47.7 5.5 43.1 10.00 59.6 5.71 3.3 *54SMO is a registered trademark of vesta Polarit. 68 onnect with the est! opyright 011 Shurjoint

SS-1 REDUING TEE MODEL SS-50 ONENTRI REDUER atalog 011 The Shurjoint Model SS-1 and SS-50 stainless steel fittings are investment cast in sizes to 8" and sand cast or wrought in sizes 10"-4". - E-E Nominal Pipe SS-1 Reducing Tee SS-50 oncentric Reducer Size O. D. - Weight E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 40 x 5 48.3 x 33.483 83 83 0.6 64 0.3 1½x 1 1.900 x 1.315 3.5 3.5 1.3.50 0.6 40 x 3 48.3 x 4.83 83 83 0.6 64 0.3 1½ x 1¼ 1.900 x 1.660 3.5 3.5 1.3.50 0.7 50 x 5 60.3 x 33.483 83 83 0.7 64 0.3 x 1.375 x 1.315 3.5 3.5 1.5.50 0.8 50 x 3 60.3 x 4.83 83 83 0.8 64 0.7 x 1¼.375 x 1.660 3.5 3.5 1.8.50 0.7 50 x 40 60.3 x 48.383 83 83 0.8 64 0.3 x 1½.375 x 1.900 3.5 3.5 1.8.50 0.7 65 x 5 73.0 x 33.495 95 95 0.9 64 0.4 ½ x 1.875 x 1.315 3.74 3.74.0.50 0.9 65 x 3 73.0 x 4.95 95 95 0.9 64 0.5 ½ x 1½.875 x 1.660 3.74 3.74.0.50 1.1 65 x 40 73.0 x 48.395 95 95 0.9 64 0.5 ½x 1½.875 x 1.900 3.74 3.74.0.50 1. 65 x 50 73.0 x 60.395 95 95 1.5 64 0.5 ½ x.875 x.375 3.74 3.74 3.3.50 1.1 76.1 x 33.495 95 95 0.9 64 0.4 76.1 mm x 5.. 3.000 x 1.315 3.74 3.74.0.50 0.9 76.1 x 4.95 95 95 0.9 64 0.5 76.1mm x 3.. 3.000 x 1.660 3.74 3.74.0.50 1.1 76.1 x 48.395 95 95 0.9 64 0.5 76.1 mm x 40.. 3.000 x 1.900 3.74 3.74.0.50 1. 76.1 x 60.395 95 95 1.5 64 0.5 76.1mm x 50.. 3.000 x.375 3.74 3.74 3.3.50 1.1 80 x 3 88.9 x 4.108 108 108 1.6 64 0.5 3 x 1½ 3.500 x 1.660 4.5 4.5 3.5.50 1.1 80 x 40 88.9 x 48.3108 108 108 1.3 64 0.6 3 x 1½ 3.500 x 1.900 4.5 4.5.9.50 1.5 80 x 50 88.9 x 60.3108 108 108.1 64 0.6 3 x 3.500 x.375 4.5 4.5 4.6.50 1.3 80 x 65 88.9 x 73.0108 108 108.1 64 1.0 3 x ½ 3.500 x.875 4.5 4.5 4.6.50. 88.9 x 76.1108 108 108.1 64 1.0 80 x 76.1mm.. 3.500 x 3.000 4.5 4.5 4.6.50. 100 x 50 114.3 x 60.3 17 17 3.3 76 1.0 4 x 4.500 x.375 5.00 5.00 7.3 3.00. 100 x 65 114.3 x 73.0 17 17 3.3 76 1.4 4 x ½ 4.500 x.875 5.00 5.00 7.3 3.00 3.1 114.3 x 76.1 17 17 3.3 76 1.4 100 x 76.1mm.. 4.500 x 3.000 5.00 5.00 7.3 3.00 3.1 100 x 80 114.3 x 88.9 17 17 3. 76 0.9 4 x 3 4.500 x 3.500 5.00 5.00 7.0 3.00.0 Nominal Pipe SS-1 Reducing Tee SS-50 oncentric Reducer Size O. D. - Weight E - E Weight mm / in mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs 15 x 100 139.7 x 114.3 140 140 5.1 89 1.6 5 x 4 5.500 x 4.500 5.50 5.50 11. 3.50 3.5 15 x 100 141.3 x 114.3 140 140 5.1 89 1.6 5 x 4 5.563 x 4.500 5.50 5.50 11. 3.50 3.5 165.1 x 88.9 165 165 7.0 10.3 165.1mm x 80.. 6.500 x 3.500 6.50 6.50 15.4 4.00 5.1 165.1 x 114.3 165 165 8.4 10.3 165.1mm x 100.. 6.500 x 4.500 6.50 6.50 18.5 4.00 5.1 165.1mm 165.1 x 139.7 165 165 8.8 10.6 x 139.7mm 6.500 x 5.500 6.50 6.50 19.4 4.00 5.7 150 x 80 168.3 x 88.9 165 165 7.1 10.3 6 x 3 6.65 x 3.500 6.50 6.50 15.6 4.00 5.1 150 x 100 168.3 x 114.3 165 165 8.8 10.3 6 x 4 6.65 x 4.500 6.50 6.50 19.4 4.00 5.1 150 x 15 168.3 x 141.3 165 165 8.8 10.6 6 x 5 6.65 x 5.563 6.50 6.50 19.4 4.00 5.7 00 x 100 19.1 x 114.3 197 197 16.1 17 4.3 8 x 4 8.65 x 4.500 7.76 7.76 35.4 5.00 9.5 00 x 15 19.1x 141.3 197 197 13.0 17 5.4 8 x 5 8.65 x 5.563 7.76 7.76 8.6 5.00 11.9 00 x 150 19.1 x 168.3 197 197 4.6 17 4.3 8 x 6 8.65 x 6.65 7.76 7.76 54.1 5.00 9.5 50 x 150 73.0 x 168.3 9 9 6.9 15 8.3 10 x 6 10.750 x 6.65 9.0 9.0 59. 6.00 18.3 50 x 00 67.4 x 16.3 9 9 7.3 15 8.7 10 x 8 10.58 x 8.516 9.0 9.0 60.1 6.00 19.1 300 x 00 33.9 x 19.1 54 54 5.5 178.0 1 x 8 1.750 x 8.65 10.00 10.00 56.1 7.00 49.5 300 x 50 33.9 x 73.0 54 54 6.0 178 11.3 1 x 10 1.750 x 10.750 10.00 10.00 57. 7.00 3.1 16.3 x 114.3 197 197 16.1 17 4.3 00 JIS x 100.. 8.516 x 4.500 7.76 7.76 35.4 5.00 9.5 16.3 x 139.7 197 197 1.7 17 5.4 00 JIS x 15.. 8.516 x 5.500 7.76 7.76 7.9 5.00 11.9 00 JIS 16.3 x 165.1 197 197 1.6 17 4.3 x 165.1mm 8.516 x 6.500 7.76 7.76 7.7 5.00 9.5 50 JIS 67.4 x 165.1 9 9 6.9 15 8.3 x 165.1mm 10.58 x 6.500 9.0 9.0 59. 6.00 18.3 50 JIS 67.4 x 16.3 9 9 7.3 15 8.7 x 00 JIS 10.58 x 8.516 9.0 9.0 60.1 6.0 19.1 300 JIS 318.5 x 16.3 54 54 5.5 178.0 x 00 JIS 1.539 x 8.516 10.00 10.00 56.1 7.00 49.5 300 JIS 318.5 x 67.4 54 54 6.0 178 11.3 x 50 JIS 1.539 x 110.58 10.00 10.00 57. 7.00 3.1 onnect with the est! 69 opyright 011 Shurjoint

WROUGHT STINLESS STEEL FITTINGS atalog 011 MODEL WS-10 90 ELOW, S/R WS-10L 90 ELOW, L/R WS-11 45 ELOW, L/R WS-0 EQUL TEE WS-60 P Shurjoint wrought stainless steel grooved fittings are fabricated from Sch. 10S E-E stainless steel pipe to STM 403 WP-S 304 or 316, or welded pipe or plate WP-W. dimensions conform to NSI 16.9 and 16.8. WS-10 WS-10L WS-11 WS-0 WS-60 Nominal Pipe WS-10 WS-10L WS-11 WS-0 WS-60 Size O.D. Weight Weight Weight Weight E-E Weight mm / in mm / in mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs mm / in Kgs / Lbs 350 355.6 355.6 3.59 533.4 36.30.3 18.14 79.4 48.53 165.0 8.16 14 14.000 14.00 51.90 1.00 79.86 8.75 39.91 11.00 106.77 6.50 17.95 400 406.4 406.4 30.84 609.6 47.63 54.0 3.81 304.8 58.97 178.0 14.51 16 16.000 16.00 67.85 4.00 104.79 10.00 5.38 1.00 19.73 7.00 31.9 450 457. 457. 40.43 685.8 59.87 85.5 9.94 34.9 76.66 03.0 17.96 18 18.000 18.00 89.15 7.00 131.71 11.5 65.87 13.50 168.65 8.00 39.51 500 508.0 508.0 54.90 76.0 99.79 317.5 49.89 381.0 103.4 9.0 7. 0 0.000 0.00 11.05 30.00 19.54 1.50 109.76 15.00 7.5 9.00 59.88 600 609.6 609.6 93.55 914.4 140.61 381.0 70.31 431.8 155.58 67.0 34.47 4 4.000 4.00 06.7 36.00 309.34 15.00 154.68 17.00 34.8 10.50 75.83 MODEL WS-1 REDUING TEE Material: STM 403 WP-S 304 or 316 Wall thickness: Sch. 10S & - dimensions: NSI 16.9 & 16.8 - WS-1 MODEL WS-50 oncentric Reducer Material: STM 403 WP-S 304 or 316 Wall thickness: Sch. 10S E-E dimensions: NSI 16.9 & 16.8 E-E WS-50 Nominal Pipe Pipe WS-1 Reducing Tee Size O.D. - Weight mm / in mm / in mm / in mm / in Kgs / Lbs 350 x 150 355.6 x 168.3 79.0 38.0.19 14 x 6 14.000 x 6.65 11.0 9.37 48.9 350 x 00 355.6 x 19.1 79.0 48.0 3.8 14 x 8 14.000 x 8.65 11.0 9.76 5.5 350 x 50 355.6 x 73.0 79.0 57.0 5.11 14 x 10 14.000 x 10.750 11.0 10.1 55.37 350 x 300 355.6 x 33.9 79.0 70.0 7.16 14 x 1 14.000 x 1.750 11.0 10.63 59.88 400 x 150 406.4 x 168.3 305.0 64.0 7.79 16 x 6 16.000 x 6.65 1.0 10.40 61.8 400 x 00 406.4 x 19.1 305.0 73.0 9.46 16 x 8 16.000 x 8.65 1.0 10.75 64.95 400 x 50 406.4 x 73.0 305.0 8.0 30.87 16 x 10 16.000 x 10.750 1.0 11.10 68.06 400 x 300 406.4 x 33.9 305.0 95.0 33.08 16 x 1 16.000 x 1.750 1.0 11.61 7.95 400 x 350 406.4 x 355.6 305.0 305.0 34.95 16 x 14 16.000 x 14.000 1.0 1.00 77.06 Nominal Pipe Pipe WS-50 oncentric Reducer Size O.D. E-E Weight mm / in mm / in mm / in Kgs / Lbs 350 x 150 355.6 x 168.3 79.0 1.6 14 x 6 14.000 x 6.65 11.0 7.8 350 x 00 355.6 x 19.1 79.0 14.6 14 x 8 14.000 x 8.65 11.0 3.1 350 x 50 355.6 x 73.0 79.0 17.1 14 x 10 14.000 x 10.750 11.0 37.8 350 x 300 355.6 x 33.9 79.0 0.3 14 x 1 14.000 x 1.750 11.0 44.7 400 x 150 406.4 x 168.3 305.0 16.1 16 x 6 16.000 x 6.65 1.0 35.5 400 x 00 406.4 x 19.1 305.0 18. 16 x 8 16.000 x 8.65 1.0 40. 400 x 50 406.4 x 73.0 305.0 1.0 16 x 10 16.000 x 10.750 1.0 46. 400 x 300 406.4 x 33.9 305.0.8 16 x 1 16.000 x 1.750 1.0 50.3 400 x 350 406.4 x 355.6 305.0 6.7 16 x 14 16.000 x 14.000 1.0 58.9 70 onnect with the est! opyright 011 Shurjoint

SS-41 FLNGE DPTER - NSI 15/150 atalog 011 The Model SS-41 stainless steel flange adapter allows for a direct connection with NSI lass 15/150 flanges. The SS-41 is investment cast in Gr. F8 (304) or F8M Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. (316). Integral closure tabs located on the flange OD help facilitate alignment and assembly. D E Nominal Pipe Max. Working Max. End Dimensions Sealing Surface olts Size O. D. Pressure Load D E Size. Weight mm / in mm / in ar / PSI kn / Lbs mm / in mm / in mm / in mm / in mm / in No. in Kgs / Lbs 50 60.3 0 5.71 15 11 1 60 87.1 4 ⅝ x 3.375 300 1330 6.00 4.75 0.83.36 3.4... 4.6 65 73.0 0 8.37 178 140 73 10.7 4 ⅝ x 3 ½.875 300 1950 7.00 5.50 0.87.87 4.00... 6.0 80 88.9 0 1.41 190 15 4 89 116 3.1 4 ⅝ x 3 3 3.500 300 880 7.50 6.00 0.94 3.50 4.56... 6.8 100 114.3 0 0.51 9 191 4 114 141 4.5 8 ⅝ x 3 4 4.500 300 4770 9.00 7.50 0.94 4.50 5.56... 9.9 150 168.3 0 44.47 79 41 5 168 198 5.8 8 ¾ x 3½ 6 6.65 300 10340 11.00 9.50 1.00 6.6 7.79... 1.9 00 19.1 0 75.37 343 98 8 19 54 9. 8 ¾ x 3½ 8 8.65 300 1750 13.50 11.75 1.1 8.6 10.00... 0. * ased on Sch. 10S pipe. MODEL SS-80 STINLESS STEEL Universal Flange dapter The Model SS-80 Universal Flange dapter provides for a rigid transition between a grooved piping system and a flanged piping system or component. The SS-80 can mate to NSI 15/150, PN 10/16, S-10E or JIS 10K, and is available standard in F8 (304) or F8M (316). Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. X Y Z L D Nominal Pipe O. D. Y: Flange Drilling olt Size asic NSI 15 / 150 PN 10, 16 JIS 10K Z Size Weight mm / in mm / in L X mm / in mm / in mm / in mm / in mm / in No. Kgs / Lbs 50 60.3 64 165 11 15 10 16 M16 4.0.375.50 6.50 4.75 4.9 4.7 0.63 ⅝ 4 4.4 65 73.0 70 185 140 145 140 16 M16 4.9 ½.875.75 7.8 5.50 5.70 5.50 0.63 ⅝ 4 6.4 76.1 76 185 140 145 140 16 M16 4 3.0 76.1 mm.. 3.000 3.00 7.8 5.50 5.70 5.50 0.63 ⅝ 4 6.6 80 88.9 76 00 15 160 150 16 M16 8 3.4 3 3.500 3.00 7.78 6.00 6.30 5.90 0.63 ⅝ 8 7.5 100 114.3 76 0 191 180 175 16 M16 8 3.9 4 4.500 3.00 8.66 7.50 7.09 6.89 0.63 ⅝ 8 8.6 139.7 76 54 16 10 10 M16 / M0 8 6.7 139.7 mm.. 5.500 3.00 10.00 8.50 8.7 8.7 0.87 ⅝ / ¾ 8 14.7 15 141.3 89 54 16 10 10 M16 / M0 8 6.7 5 5.563 3.50 10.00 8.50 8.7 8.7 0.87 ⅝ / ¾ 8 14.7 165.1 76 70 41 40 40 16 M0 8 6.8 165.1 mm.. 6.500 3.00 10.63 9.50 9.45 9.45 0.63 ¾ 8 15.0 150 168.3 89 91 41 40 40 4 M0 8 6.9 6 6.65 3.50 11.46 9.50 9.45 9.45 0.94 ¾ 8 15. 00 19.1 10 343 98 95 9 M0 8 / 1 14.5 N/ 8 8.65 4.00 13.50 11.75 11.61. 1.14 ¾ 8 / 1 31.9 16.3 10 343 98 95 3 M0 8 / 1 14.0 00 JIS N/.. 8.516 4.00 13.50 11.75 11.61. 0.91 ¾ 8 / 1 30.8 ontact Shurjoint for other sizes. onnect with the est! 71 opyright 011 Shurjoint

SS-73 STINLESS STEEL MEHNIL TEE atalog 011 The Shurjoint Model SS-73 stainless steel mechanical tee is the ideal fitting for branch or direct outlet connections to sprinkler heads, drop nipples and or gauges on stainless steel pipe. No need for welding, simply cut or drill a hole at the desired location, position the housing so that the locating collar fits within the hole and secure with the bolts and nuts. D Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 The working pressure shown is based on Sch. 40S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. T Nominal Hole Dia. Dimensions olt Size +1.6, -0 / +0.063, -0 D T* Size Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in in Kgs / Lbs 3 x 15 30 41 6 87 49 7 0.3 5 /16 x 1½ 1¼ x ½ 1.18 1.60 1.0 3.44 1.93 1.06. 0.7 3 x 0 30 44 6 87 49 9 0.3 5 /16 x 1½ 1¼ x ¾ 1.18 1.70 1.0 3.44 1.93 1.14. 0.7 3 x 5 30 51 6 87 49 34 0.4 5 /16 x 1½ 1¼ x 1 1.18.00 1.0 3.44 1.93 1.34. 0.9 40 x 15 30 44 9 90 49 30 0.3 5 /16 x 1½ 1½ x ½ 1.18 1.70 1.13 3.54 1.93 1.18. 0.7 40 x 0 30 46 9 90 49 31 0.3 5 /16 x 1½ 1½ x ¾ 1.18 1.81 1.13 3.54 1.93 1.. 0.7 40 x 5 30 53 9 90 49 36 0.4 5 /16 x 1½ 1½ x 1 1.18.09 1.13 3.54 1.93 1.4. 0.9 50 x 15 30 51 36 109 51 37 0.5 5 /16 x 1½ x ½ 1.18.00 1.4 4.8.00 1.46. 1.1 50 x 0 30 53 36 109 51 8 0.5 5 /16 x 1½ x ¾ 1.18.09 1.4 4.8.00 1.10. 1.1 50 x 5 30 60 36 109 51 43 0.6 5 /16 x 1½ x 1 1.18.37 1.4 4.8.00 1.69. 1.4 T*: Take-out (enter of run to end of pipe to be engaged) MODEL SS-76 STINLESS STEEL Y-STRINER The Model SS-76 Stainless Steel Groovedend Y-Strainers are designed to strain debris and foreign matter from piping systems and thus provide inexpensive protection for costly pumps, meters and other components. leaning and maintenance of the screen can be accomplished easily by removing the coupling. The Model SS-76 Stainless Steel Y-Strainer is suitable for vertical or horizontal installations. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Proof test pressure: 1.5 times the working pressure, non-shock cold water. urst pressure is engineered minimum 3 times the working pressure. Nominal Pipe Max. Working Dimensions Drain Plug Size OD Pressure Size Weight mm / in mm / in bar / psi mm / in mm / in mm / in mm / in Kgs / Lb 65 73.0 0 73 199 1 15 7.6 ½.875 300 10.75 7.83 4.80 ½ 16.7 80 88.9 0 99 1 19 15 8.6 3 3.500 300 11.75 8.70 5.08 ½ 18.9 100 114.3 0 36 69 168 5 9.6 4 4.500 300 14.5 10.59 6.61 1 1.1 150 168.3 0 470 357 19 5 39.0 6 6.65 300 18.50 14.05 8.6 1 85.8 7 onnect with the est! opyright 011 Shurjoint

SJ-600L all Valve atalog 011 The Model SJ-600L is a two-piece, full-port stainless steel ball valve rated at 600 psi (40 bar) and is available in F8M (316). The SJ-600L features a floating ball for lower torque and is supplied with a lever handle as well as ISO mounting holes to accommodate a full range of gear or power actuators. Working Pressure Shell Test Max. Service (S40S, Roll-Grooved) (Hydrostatic) Temperature 600 psi @100 F 900 psi EPDM: 30 F / 110 WP.. 4 ar @38 63 ar Nitrile: 180 F / 8 *Working pressure is for connection with cut- or roll-grooved schedule Sch. 40S pipe. *Seat test: 110% the working pressure. W Size: 4" H d L Size: 1½" - 3" Nominal Pipe Operating Dimensions pprox. Size OD Torque L H W d Weight mm / in mm / in Lb - in / N - m mm / in mm / in mm / in mm / in Kgs / Lbs 40 48.3 7 140 94 193 38 3.0 1½ 1.900 6 5.50 3.70 7.60 1.50 6.6 50 60.3 17 156 105 193 50 4.0.375 150 6.15 4.13 7.60 1.97 8.8 65 73.0 1 180 110 50 65 7.0 ½.875 186 7.09 4.33 9.84.56 15.4 76.1 1 180 110 50 65 7.0 76.1 mm.. 3.000 186 7.09 4.33 9.84.56 15.4 80 88.9 8 14 15 50 78 9.4 3 3.500 48 8.4 6.00 9.84 3.07 0.7 100 114.3 45 40 167 90 100 5.0 4 4.500 398 9.45 6.57 11.4 3.94 55.0 * The weight includes the lever handle. MODEL SJ-600W all Valve W The Model SJ-600W is supplied with a worm gear operator. The standard gear operator is supplied with a bracket and extension sleeve. Sizes available are "/50mm through 4"/100mm. K H Nominal Pipe Dimensions pprox. Size OD K H W Weight mm / in mm / in mm / in mm / in mm / in Kgs / Lbs 50 60.3 15 137 03 8.10.375 6 5.38 8 17.8 65 73.0 15 145 03 11.10 ½.875 6 5.68 8 4.4 76.1 15 145 03 11.10 76.1 mm. 3.000 6 5.68 8 4.4 80 88.9 15 18 03 13.50 3 3.500 6 7.16 8 9.70 100 114.3 15 03 03 9.0 4 4.500 6 8.00 8 63.80 * The weight includes the worm gear operator. onnect with the est! 73 opyright 011 Shurjoint

SJ-400 UTTERFLY VLVE atalog 011 The Shurjoint Model SJ-400 utterfly Valve is a grooved end stainless steel butterfly valve, supplied with a 10 position lever handle (SJ-400-L) or worm gear operator (SJ-400-W). The body is available in F8M (type 316) to STM 743 with integral neck and ISO 511 mounting pad. It features a dual seal disc encapsulated with Gr. E EPDM for cold and hot water services. The end-toend dimensions conform to MSS SP-67. Working Pressure Max. Service (S40S, Roll-grooved) Temperature 300 psi @100 F EPDM: 30 F / 110 lass 150.. 0 ar @38 Nitrile: 180 F / 8 The working pressure shown is based on roll-grooved Sch. 40S pipe. pply 110% for cut-grooved Sch. 40S pipe. pply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe. Seat test: 110% the working pressure. Shell test: 1.5 times the working pressure. SJ-400-W 14-4 E E SJ-400-L -1 F D D O. D. O. D. SJ-400-W Nominal Pipe Dimensions Operating Size O. D. D E Torque Weight mm / in mm / in mm / in mm / in mm / in mm / in mm / in N-m / In - Lb Kgs / Lbs 50 60.3 81 64 63 106 19 8.80.3.375 3.19.50.480 4.17 7.56 78 5.0 65 73.0 97 80 68 111 19 9.50 3. ½.875 3.81 3.150.677 4.8 7.56 84 7.0 76.1 97 80 68 111 19 9.50 3. 76.1 mm.. 3.000 3.81 3.150.677 4.8 7.56 84 7.0 80 88.9 97 9 76 16 19 10.7 3.5 3 3.500 3.81 3.6.99 4.97 7.56 95 6.6 100 114.3 116 118 89 135 5.6 5.0 4 4.500 4.56 4.646 3.504 5.33 9.9 00 11.0 165.1 148 17 114 168 5 34.9 9. 165.1 mm.. 6.500 5.81 6.77 4.488 6.6 9.9 310 0. 150 168.3 148 17 114 184 34 34.9 9. 6 6.65 5.81 6.77 4.488 7.5 13.46 310 0. 00JIS 16.3 133 140 08 34 45.1 1... 8.516 5.4 8.740 5.51 8.0 13.46 400 6.8 00 19.1 133 140 08 34 45.1 1. 8 8.65 5.4 8.740 5.51 8.0 13.46 400 6.8 50 73.0 160 84 186 35 5 170 8.3 10 10.750 6.30 11.18 7.3 9.5 9.9 1500 31.3 300 33.9 166 334 13 60 356 6 40.0 1 1.750 6.56 13.15 8.39 10.4 14.0 000 88.0 350 355.6 178 359 4 76 03 54 59.0 14 14.000 7.00 14.13 8.8 10.87 8.00 10.0 130.0 400 406.4 178 410 48 30 4 306 67.0 16 16.000 7.00 16.14 9.76 11.89 9.50 1.00 147.4 450 457. 03 464 83 350 4 305 86.0 18 18.000 8.00 18.5 11.14 13.78 9.50 1.00 189. 500 508.0 16 515 314 383 90 41 133.0 0 0.000 8.50 0.8 1.36 15.08 11.40 16.0 9.6 600 609.6 54 616 368 453 90 41 160.0 4 4.000 10.00 4.5 14.50 17.83 11.40 16.0 35.0 * The weight includes the lever handle or worm gear operator. 74 onnect with the est! opyright 011 Shurjoint