S 470. ASSEMBLED STACK LIGHTS Ø 70mm

Similar documents
S 370 MODULAR STACK LIGHTS FEATURES. Multifunctional Lamp. 1 lamp, 3 different kinds of lights. Steady, flashing and rotating.

The modular structure makes it possible to build at least 5 configurations for each visual lens unit

PRODUCT SPECIFICATION. Stack Lights. Series.

Linear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1

SPECIFICATION SHEET ORION ROAD LANTERN. IP66 RATED CRI. 230v /50hz

Signal towers and beacons

Page 8-3. MULTICOLOURED SIGNAL TOWERS Ø70mm/2.75. Modular signal towers Ø70mm/2.75

Prewired position switches FF series

Signaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility

Distinctive Characteristics

LED Security Wallpack Installation Instruction

BRIEF INFORMATION DuraLED

LUMOTAST FK. General data. Content

Distinctive Characteristics

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel

Zone 1 Linear Range - Installation Guide

Sx-F/G-SG-ST SERIES APPLICATIONS

General_technical_data Series

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67

Eco-Modul 60 Signal tower

General Specifications

Prewired position switches FF series

Compact Sheet-Steel Light Fittings Series 6114/1

Emergency lighting units EM powerled

Signaling solutions. Monolithic indicator banks Harmony type XVC. Dimensions: page 12

WORKPLUS. signaling devices for workplace vehicles GENERAL CATALOGUE

SUPER-BRIGHT MULTI-CHIP LED SIGNAL LAMPS

Switches Unlimited Contact: Phone: * Fax:

VEHICLE LAMPS, BEACONS & REFLECTORS

7. 4 th Stack Lens Color

Pressure Transmitters

ALUMINIUM AND STAINLESS STEEL ENCLOSURES - EJB... SERIES

Distinctive Characteristics

Ø 68 mm to ø 115 mm. Material: Weight: Bearing Life: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating:

Position switches FC series

Compact Sheet-steel Emergency Light Fitting Series 6118/1

Miniature Switches & Pilot Devices

CONTROL UNITS. Features. Specifications

Transformers for Low-voltage Halogen Incandescent Lamps

Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar

Differential Pressure Sensors

Indicator body single with two independent lamp bases, raised, rectangular, black plastic, screw terminals, without bezel. Part No

Clarian uk ltd SWITCHES AND CONTROLS TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC TOP-TECHNIC.

Pressure Sensors. for liquid and gaseous media

Floodlight Range Installation Guide

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot

Washdown Industrial/Light Marine UniGuard

Emergency lighting units EM powerled

Waterproof TCW060 just light

SturdiSignal Series. Low Profile LED Warning Signal Light. Specifications. Dimensions. Compliances

110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W

Safety switches for hinged doors

High-pressure switch for gas, air, flue gases and combustion products GW A4/2 HP

Pressure Transmitter JUMO dtrans p30 Type

3. Operating instructions: Minor 200

HMI Components. Series. LED-Indicator. Machinery and Automation Panel building Laboratory and measuring equipment. Raised design

Bright illumination face and snap-action switching.

Emergency lighting units PC COMBO

USER MANUAL FOR THE BULKHEAD LIGHT FITTING, TYPE /..

Choose the future Choose

Ø 68 mm to ø 115 mm. Material: Weight: Shaft Loads: Enclosure Rating: Connection Options. Cable: Cable Glands:

LED Driver Linear / area fixed output

Switches- and Indicators

ALU ROUND Ø24mm DESCRIPTION

SIGNAL BEACONS Signal beacons Ø62mm Blinking or steady light modules Sound-light pulsed or continuous modules Incandescent and LED bulbs.

Distinctive Characteristics

Emergency lighting units EM INVERTER

IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

Sliding doors SL5 series

Fixed Head Emergency Lights

Position switches FD series

HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch

L-801 HBM 150/2 Airport Rotating Beacon Compliant with Standards: FAA: L-801 AC 150/ (Current Edition) ICAO: Annex 14, para 5.3.

Easy and safe installation

Pressure transmitter for elevated media temperatures

Contents SAE Compliant LED Lamps

Model 277EC ENGINE IDLE LIMITER

Protection components

Stack Light- Light Only. Stack Light with Sound

Push Button Units and Indicator Lights

Emergency lighting units EM powerled

Linear Luminaire for Fluorescent Lamps Series EXLUX 6401

Electronic Ignition Equipment

LED Universal Three-Stud Combination Tail Light 16pcs Super flux LED 12V or 24V Material:Acrylic lens, black ABS base 12pcs/2.37 N.W.7.

ø12 A2 Series Miniature Control Units

We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories

Position switches FR series

ASI. Blinking or Steady Light Modules

Emergency lighting units EM powerled. EM powerled BASIC 4W Emergency lighting LED Driver

Material: Weight: Shaft Loads: Enclosure Rating: Cable: Cable Glands:

Pressure switch for gas, GW 500 A4 GW 500 A4/2

Emergency Light Fitting for Fluorescent Lamps Series 6009

8000 Series Liquid Flow Meter

8000 Series Liquid Flow Meters

Versions. Version with K VS Version with K VS 2.0. Fig. 1: Type 3967 Solenoid Valve

Ultrasonic Sensor U-B

Tubular fittings Tubular fluorescent fitting with automatic switch off XFP - Zones 1, 2 & 21, 22

IP series Latching action pushbutton switches for harsh environments

550-xx04. 5mm LED CBI Circuit Board Indicator Top View, Single x x Features. Custom For custom LEDs contact factory.

DC POWER SUPPLY ALIMENTATION C.C.

Transcription:

S 470 ASSEMBLED STACK LIGHTS Ø 70mm stack light compact and assembled the right solution for warehouse management and facilitate orders available pre-assembled with wires or connector M12, a great advantage for workers ultra-bright LED for longlife and energy saving available in different colors TECHNICAL FEATURES Compliance Directive 2006/95/EC Low Voltage Directive 2004/108/EC Electromagnetic Compatibility Directive 2011/65/EC RhOS Directive 2006/42/EC Machinery Conformity to standards EN 60947.5.1 - EN 60073 - EN 60529 - EN 60068.2.6 and 27 - EN 60204.1 - EN ISO 7731 - EN 981 - IEC 536 Material polycarbonate (PC) operating Voltage 24V DC (+/-10%) Current 40 ma per unit Protection degree IP 64 (if correctly assembled with cap and gasket), with audible IP 54 Protection against electric shock Class II, safety insulation (IEC536) Resistance to vibrations 2 g min. (10-150 Hz) Operating Temperature -20 C + 50 C lens color orange, blue, yellow, white, red, green number of combinable units max 6 Sound type 1: 85dB, pulse or continuous type 2: 100dB, pulse type 3: 100dB, continuous Connections with screw cable clamp (maximum cable size 1,5 mm 2 ) 30

ASSEMBLED STACK LIGHTS s470 TYPE TCL92SB32 TCL92SB52 TCL93SB532 TCL93AB532 TCL94SB5632 TCL94AB5632 TCL95SB95632 TCL95AB95632 ORDER CODES DESCRIPTION terminal unit, red and amber light units terminal unit, red and green light units terminal unit, red,amber and green light units terminal unit, red,amber and green light unit, with integrated sound terminal unit, red, amber, blue and green light units terminal unit, red, amber, blue and green light units with audio integrated terminal unit, red, amber, blue, white and green light units terminal unit, red, amber, blue, white and green light units with audio integrated TCL02SB32 TCL02SB52 TCL03SB532 TCL03AB532 TCL04SB5632 TCL04AB5632 TCL05SB95632 TCL05AB95632 gray terminal unit, red and amber light units gray terminal unit, red and green light units gray terminal unit, red, green and amber light units gray terminal unit, red, green and amber light units with integrated sound gray terminal unit, red, green, blue and amber light units gray terminal unit, red, green, blue and amber light units with audio integrated gray terminal unit, red, green, white, blue and amber light units gray terminal unit, red, green, white, blue and amber light units with integrated audio add this following partial code to the product when ordering: AU For version with audible unit 1 (85 db pulse and continuous sound) AD For version with audible unit 2 (100 db pulse sound) AT For version with audible unit 3 (100 db continuous sound) CC For pre-assembled cable 400 mm lenght and connector M12 with 5 indicators output CF For pre-assembled cable 400 mm lenght,5 wires output Esempio example: TCL3SB532/AD/CC... terminal unit, green, amber and red lights, integrated audible unit, pulse 85 db and pre-assembled cable with M12 connector Click Clack see page 29 Mechanical Drawings see page 62 If necessary, complete with mounting accessories see pages 26/27 31

S 450 ASSEMBLED STACK LIGHTS Ø 45mm stack light 45mm diameter, compact and assembled the right solution for warehouse management and facilitate orders available pre-assembled with wires or connector M12, a great advantage for workers available in different colors, max 6 units ultra-bright LED for longlife and energy saving TECHNICAL FEATURES Compliance Directive 2006/95/EC Low Voltage Directive 2004/108/EC Electromagnetic Compatibility Directive 2011/65/EC RhOS Directive 2006/42/EC Machinery Conformity to standards EN 60947.5.1 - EN 60073 - EN 60529 - EN 60068.2.6 and 27 - EN 60204.1 - EN ISO 7731 - EN 981 - IEC 536 Material polycarbonate (PC) Voltage range 24V DC (+/-10%) Current 40 ma per unit Protection degree IP 64 (if correctly assembled with cap and gasket), with audible IP 54 Protection against electric shock class II, safety insulation (IEC 536) Resistance to vibrations 2 g min. (10-150 Hz) Operating Temperature -20 C + 50 C Number of combinable units orange, blue, yellow, white, red, green Number of combinable units max 6 Sound 80 db, pulse or continuous Connections screw clamps with binding post gauge max. 1,5 mm 2 32

ASSEMBLED STACK LIGHTS s450 type FAL1YB x FAL2YB 52 FAL2AB 52 FAL3YB 532 FAL3AB 532 FAL4YB 5632 FAL4AB 5632 FAL5YB 95632 FAL5AB 95632 ORDER CODES DESCRIPTION 1 color lamp unit (replace X with color number you need) 2 colors lamp unit, green and red 2 colors lamp unit, green and red with audible unit 3 colors lamp unit, green, amber and red 3 colors lamp unit, green, amber with audible unit 4 colors lamp unit, green, amber, blue and red 4 colors lamp unit, green, amber blue and red with audible unit 5 colors lamp unit, green, amber, blue, white and red 5 colors lamp unit, green, amber, blue, white and red with audible unit Add this following partial code to the product when ordering 01 For version with gray terminal unit and direct mounting T1 For version with gray terminal unit, base and pole height 100 mm 02 for version with terminal unit and direct mounting T2 for version with terminal unit with base and pole 100 mm height 06 for version with neutral light lamps (colored LED) CC CF For version with pre-assembled cable 400mm lenght and connector M12 with 5 indicators output for version with pre-assembled cable 400 mm lenght and 5 wires output replace x with: 2=red, 3=amber,4= yellow,5=green,6=blue,9=white when ordering example: 3 colors lamp unit,green,amber and red,gray terminal unit and pre-assembled calbe with connector M12 =FAL3YB532/01/CC Click Clack see page 29 Mechanical Drawings see page 63 If necessary, complete with mounting accessories see page 26 33

S 300 SMALL SIZE ASSEMBLED STACK LIGHTS Ø 30mm Reduced dimensions, great brightness facility of wiring and flexibility of assembling distinguish this series. a lot of possible combinations. TECHNICAL FEATURES Compliance Directive 2006/95/EC Low Voltage Directive 2004/108/EC Electromagnetic Compatibility Directive 2011/65/EC RhOS Directive 2006/42/EC Machinery Conformity to standards EN 60947.5.1 - EN 60073 - EN 60529 - EN 60068.2.6 and 27 - EN 60204.1 - EN ISO 7731 - EN 981 - IEC 536 Material polycarbonate (PC) Operating Voltage 24V DC (+/-10%) Current 20 ma per unit Protection degree IP 54 (if correctly assembled with cap and gasket) according to EN 60529 Protection against electric shock Class II, safety insulation (IEC 536) Resistance to vibrations 2 g min. (10-150 Hz) according to EN 60068-2-6 Operating Temperature -20 C +50 C lens color orange, blue, yellow, white, red, green number of combinable units max 5 Sound 75dB, continuous Connections with Screw cable clamps (max cable size 1,5 mm 2 ) 34

ASSEMBLED STACK LIGHTS s300 TYPE ORDER CODES DESCRIPTION TWR30 L1Y2B TWR30 L1Y3B TWR30 L1Y4B TWR30 L1Y5B TWR30 L1Y6B TWR30 L1Y9B TWR30 L2Y52B TWR30 L3Y532B TWR30 L3A532B TWR30 L4Y5632B TWR30 L4A5632B TWR30 L5Y95632B red light lamp amber light lamp yellow light lamp green light lamp blue light lamp white light lamp Green and red light lamp Green, amber and red light lamp Green, amber and red light lamp with audible unit green, amber, blue and red light lamp green, amber, blue and red light lamp with audible unit green, amber, blue, white and red light lamp with audible unit ACCESSORIES 50-20 45 mm polycarbonate base extension pole 90 mm height 88-25 polycarbonate base and pole 54-10 polycarbonate extension pole 88-10 polycarbonate base and pole for 90 fixing 54-90 54MP9 Metal base with polycarbonate pole for 90 fixing mechanical drawings see pages 63/64 35