BEST PRODUCTS, BEST LOCAL SUPPORT MONGOOSE 184 Series The Mongoose Model 184 jetter is one of Sewer Equipment brand s best-selling units. With reliable features such as a tubular steel frame, corrosion resistant pre-painted sub assemblies, state of the art controls, strong hose reel, high quality diesel engine and the Mongoose Run Dry Pump, this machine will return more on your investment than anything in its class. Model 184 Model 184XL Model: Tank Capacity: Pump: Engine: Hose Reel: Axle: Features: Applications: 184 and 184XL 300-600 Gallons 18 GPM @ 4,000 PSI Minimum 70 hp Gas Engine *Diesel Engine Optional or California Emissions Available 1/2 Hose, 600 Capacity 6,000# (single), 9,900# (dual) 5 Cylinder Plunger Run Dry Pump, Nema 4 Control Box, Towable with Water, Available with Wirless Remote Drain Cleaning, Main Lines up to 12, Remote Access Locations, Commercial Lines, Industrial Lines, and More Model 184-TK Model 184-ETK Model: Tank Capacity: Pump: Engine: Hose Reel: Chassis Spec: Features: Applications: 184-TK and 184-ETK 300-600 Gallons 12-40 GPM @ 2,000-4,000 PSI Minimum 70 hp Gas Engine *Diesel Engine Optional or California Emissions Available 3/8-3/4 Hose, 300-600 Capacity Contact your representative for more information Pump determined by truck model, Nema 4 Control Box, Towable with Water, Available with Wirless Remote Drain Cleaning, Remote Access Locations, Commercial Lines, Industrial Lines, and More 5 TOLL FREE 800.323.1604

TRUCKS & TRAILERS MONGOOSE 254 Series Sewer Equipment s Mongoose Jetters Model 254 is one of this brand's best-selling units. With reliable features such as the Mongoose Run Dry Pump at 25 gpm @ 4000 psi, tubular steel frame, corrosion resistant pre-painted sub assemblies, state of the art controls, strong hose reel and high quality diesel engine, this machine will return more on your investment than anything in its class. Model 254 Model 254XL Model: Tank Capacity: Pump: Engine: Hose Reel: Axle: Features: Applications: 254 and 254XL 300-600 Gallons 25 GPM @ 4,000 PSI Minimum 74 hp Gas Engine or Optional Diesel Engine Equivalent 5/8 Hose, 500 Capacity 6,000# (single), 9,900# (dual) 3 Cylinder Plunger Run Dry Pump, Nema 4 Control Box, Towable with Water, Available with Wirless Remote Drain Cleaning, Main Lines up to 12, Remote Access Locations, Commercial Lines, Industrial Lines, and More Model 254-TK Model: Tank Capacity: Pump: Engine: Hose Reel: Chassis Spec: Features: Applications: Model 254-ETK 254-TK and 254-ETK 300-600 Gallons 25 GPM @ 4,000 PSI Minimum 74 hp Gas Engine or Optional Diesel Engine Equivalent 5/8 Hose, 500-600 Capacity Contact your representative for more information Pump determined by truck model, Nema 4 Control Box, Towable with Water, Available with Wirless Remote Drain Cleaning, Remote Access Locations, Commercial Lines, Industrial Lines, and More MONGOOSEJETTERS.COM 6

BEST PRODUCTS, BEST LOCAL SUPPORT MONGOOSE 402 Series Sewer Equipment s Mongoose Jetters Model 402 takes you to the next step. With reliable features such as the Mongoose Run Dry Pump at 40 gpm @ 2000 psi, tubular steel frame, corrosion resistant pre-painted sub assemblies, state of the art controls, strong hose reel and high quality diesel engine, this machine will move big debris that builds up in larger lines. It not only gives you the horsepower to clean the pipe, but it moves material effectively for a more efficient clean. Model 402 Model 402XL Model: Tank Capacity: Pump: Engine: Hose Reel: Axle: Features: Applications: 402 and 402XL 300-600 Gallons 40 GPM @ 2,000 PSI Minimum 74 hp Gas Engine or Optional Diesel Engine Equivalent 3/4 Hose, 400 Capacity 6,000# (single), 9,900# (dual) 3 Piston Water Pump, Nema 4 Control Box, Towable with Water, Avialable with Wireless Remote Drain Cleaning, Main Lines up to 12, Remote Access Locations, Commercial Lines, Industrial Lines, and More Model 402-TK Model 402-ETK Model: Tank Capacity: Pump: Engine: Hose Reel: Chassis Spec: Features: Applications: 402-TK and 402-ETK 300-600 Gallons 40 GPM @ 2,000 PSI Minimum 74 hp Gas Engine or Optional Diesel Engine Equivalent 3/4 Hose, 400 Capacity *optional 500 capacity Contact your representative for more information Pump determined by truck model, Nema 4 Control Box, Towable with Water, Available with Wirless Remote Drain Cleaning, Remote Access Locations, Commercial Lines, Industrial Lines, and More 7 TOLL FREE 800.323.1604

TRUCKS TRUCKS & & TRAILERS TRAILERS Mongoose Truck and Van Jetters are specifically designed to eliminate the need to tow a trailer. All Mongoose Model Jetters are available in a truck or van pack option. The smaller 123 Van Pack allows you to have a quality jetting system without having to sacrifice your storage area. For customers that require a larger 18, 25, or 40GPM system and need as much storage as they can get we recommend upgrading to a larger fully enclosed truck. Full size truck mounts are also available. 184 ETK 184 Truck 123 Van Pack 123 Truck 123 Van Pack Tank Capacity: 300-600 Gallons Pump: 12-40 GPM @ 2,000-4,000 PSI Engine: 27-74 hp Gas or Diesel Options Available Hose Reel: 3/8-3/4 Hose, 300-600 Capacity Chassis Spec: Contact your representative for more information Features: Pump determined by truck model, Nema 4 Control Box, Towable with Water, Available with Wirless Remote Applications: Drain Cleaning, Remote Access Locations, Commercial Lines, Industrial Lines, and More 8 MONGOOSEJETTERS.COM MONGOOSEJETTERS.COM

HIGH EFFICIENCY NOZZLES HW FLUSHING NOZZLE The low angle dual degree jets, make the HW the ultimate flushing nozzle while using less water and performing the job faster than drilled nozzles. APPLICATIONS: Excellent line flushing nozzle with great thrust/pull, and flushing ability to bring debris back to the manhole. Part No. No. & Angle Rear Jets No. & Angle Front Jets Hose Size Working Diameter 54003-00-F 6 total: 6 x 10º 0 1/2 4-8 APPLICATIONS: A great nozzle for common obstruction removal and blockage penetration, including ice. Part No. 52405-04-F TRI-STAR PENETRATING NOZZLE The "Tri-Star" is constructed with six rear thrust jets and four forward thrust jets. This design, combined with the heavy duty forged steel construction, makes this the best blockage penetrator on the market. You will break through blockages quickly to restore flow through the pipe. No. & Angle Rear Jets 6 x 30º No. & Angle Front Jets 1 x 0º, 3 x 20º Hose Size 1/2 Working Diameter 3-8 APPLICATIONS: The ultimate obstruction removing nozzle for extreme blockages and long distance challenges. Part No. 53246-01-F AVANTI PENETRATING NOZZLE The "Avanti is a high speed rotational nozzle designed with a hardened steel drilling fixture. The drilling action of this nozzle means it will bore through even the toughest obstructions. This nozzle has rear jets only (no front jets) which means it has a much stronger pull and thrust ability than standard penetrating nozzles. No. & Angle Rear Jets No. & Angle Spinner Jets Hose Size 3 x 15º 3 1/2 Working Diameter 3-8 MONGOOSEJETTERS.COM 12

BEST PRODUCTS, BEST LOCAL SUPPORT TREMOL SPINNER ROTATIONAL NOZZLES The Tremol Spinner is a high speed rotational nozzle that cleans the entire inside of the pipe with spinning jets that scour the pipe walls. Part No. 54399-00-Z No. & Angle Rear Jets 2 x 45º No. & Angle Front Jets 2 x 90º Hose Size 1/2 Working Diameter 3-12 APPLICATIONS: Grease removal, de-scaling, crust elimination and an excellent secondary blockage removal nozzle after penetration has been established. This nozzle is rated to 3,500 PSI. ROTOMAX ROTATIONAL NOZZLES The "Rotomax" nozzle uses a controlled rotational cleaning head which rotates at a lower rotational speed than traditional spinning nozzles. This reduced speed rotation means jet spray contact time is dramatically increased thus allowing for superior cleaning of pipe walls. The Rotomax also has a forward off-set jet that cuts and provides root maintenance. Part No. 52423-01-F No. & Angle Rear Jets No. & Angle Spinner Jets Hose Size 6 x 15º 3 + 1 offset forward 1/2 Working Diameter 4-6 APPLICATIONS: Heavy grease removal and entire pipe cleaning along with excellent root maintenance capabilities. This nozzle is rated to 4,000 PSI. MEGA 3 FLUSHING NOZZLE The Mega 3 produces extreme flushing capabilities for medium duty lines which makes this a favorite for cleaning storm drains and for culvert cleaning. The anti-tip heavy weighted design makes the Mega 3 a virtual water shovel to flush back all debris. Part No. 54395-00-Z No. & Angle Rear Jets 6 x 0 º No. & Angle Front Jets 0 Hose Size 1/2 Working Diameter 4-12 APPLICATIONS: Storm lines and culverts where a strong flushing floor cleaning nozzle is needed. This nozzle is rated to 4,000 PSI. 13 TOLL FREE 800.323.1604

BEST PRODUCTS, BEST LOCAL SUPPORT MINI MISSILE HIGH EFFICIENCY NOZZLE The MINI MISSILE is a solid one piece construction nozzle. The Mini Missile s aerodynamic design combined with 5 degree orifices creates optimum thrust. These large volume orifices also produce massive water output resulting in powerful capabilities. Part No. No. & Angle Rear Jets No. & Angle Front Jets 52134-48-F 52134-42-F 3 x 5º 3 x 5º 0 1 x 0º Hose Size Working Diameter 1/2 1/2 3-12 3-12 APPLICATIONS: Drains, small pipes with limestone, soap and grease build up as well as general pipe cleaning applications. This nozzle is rated to 4,000 PSI. PULLING EYE STANDARED NOZZLE The PULLING EYE nozzle is used for pulling cable of tag lines for TV and/or Bucket Machines. Part No. No. & Angle Rear Jets No. & Angle Front Jets 51502-23-F 0 6 x 20º WH & WS Hose Size Working Diameter 1/2 3-12 APPLICATIONS: Attach and pull camera This nozzle is rated to 4,000 PSI. * WARTHOG NOZZLE WARTHOG WH 53977-00-F The WH models are best for 6-18 lines. These tools are most commonly used with small capacity combination trucks, truck jets, and large trailer jets. The WS is designed to handle 4-8 lines and its most commonly used with trailer jetters. WARTHOG WS 53976-00-F Fewer jets deliver more power, 15º angled penetrating jet, patented controlled rotation, rotating back jets cut and flush, StoneAge Attack Tips easy to maintain and durable. All of these features make it possible to cut roots, clean grease, ice blockages and remove hard mineral deposits with just one tool. Part No. 15 No. & Angle Rear Jets No. & Angle Front Jets 55079-00-Z (WS) 55088-00-Z (WH) 3 3 1 1 APPLICATIONS: Great Nozzle for removing roots and grease. This nozzle is rated to 4,000 PSI. * Warthog is a trademark of StoneAge, Inc. Hose Size Working Diameter 1/2 1/2 6-18 4-8 TOLL TOLL FREE FREE 800.323.1604 800.323.1604

BEST PRODUCTS, BEST LOCAL SUPPORT MONGOOSE WATER PUMP WATER PUMP The manufacturers of the Mongoose Run Dry Water Pump have been leaders in the field of plunger pumps for over 75 years. Mongoose water pumps are manufactured with brass manifolds, heat treated crankshafts, stainless steel check valves and pistons, industrial quality bearings, solid ceramic plungers, and heavy duty high pressure seals. The ceramic plungers and improved machining technology means you can expect this pump to tolerate changes in temperature even those caused by running it dry. The components of this pump mean you can expect top notch performance and long life. In addition, the Mongoose Water Pump is simple and affordable to service when the time comes. Part No. 41099-00-V 41143-00-V 41466-00-X 42398-00-V 41374-00-X GPM / PSI 5GPM / 3,000 PSI 10GPM / 3,000 PSI 12GPM / 3,000 PSI 18GPM / 2,500 PSI 18 GPM / 4,000 PSI Description Integral Mount Gear Reduction Pump Hyd. Drive Mount Pump Mongoose Water Pump LH Drive Pump Mongoose Water Pump MONGOOSE WATER PUMP WATER PUMP REPAIR PARTS Part No. 23296-00-Z 41458-00-Z 23634-00-Z 23298-00-Z 24630-00-Z 41459-00-Z 92436-00-Z 92437-00-Z 23301-00-Z 24631-00-Z 92438-00-Z 92439-00-Z 92440-00-Z 92442-00-Z 41564-00-X 42200-00-X 25233-00-Z 41461-00-Z 23302-00-Z 41460-00-Z 41461-00-Z 41749-00-Z Description Valve Kit 5 GPM / 2,500 PSI or 10 GPM / 2,500 PSI Valve Kit 18 GPM / 2,500 PSI or 18 GPM / 4,000 PSI Water End Seal Kit 5 GPM / 2,500 PSI Water End Seal Kit 10 GPM / 2,500 PSI Water End Seal Kit 18 GPM / 2,500 PSI Water End Seal Kit 18 GPM / 4,000 PSI Oil End Seal Kit 5 GPM / 2,500 PSI or 10 GPM / 2,500 PSI Oil End Seal Kit 18 GPM / 2,500 PSI Input Shaft Seal Kit 10 GPM / 2,500 PSI Input Shaft Seal Kit 18 GPM / 2,500 PSI or 18 GPM / 4,000 PSI Plunger Kit 5 GPM / 2,500 PSI Plunger Kit 10 GPM / 2,500 PSI Plunger Kit 18 GPM / 2,500 PSI Plunger Kit 18 GPM / 4,000 PSI Shaft Coupling Kit 5 GPM / 2,500 PSI or 10 GPM / 2,500 PSI Shaft Coupling Kit 18 GPM / 2,500 PSI Brass Kit 18 GPM / 2,500 PSI Plunger Bolt Kit 18 GPM / 2,500 PSI Plunger 18 GPM / 2,500 PSI (Requires 5 Per Pump) Brass Kit 18 GPM / 4,000 PSI Plunger Bolt Kit 18 GPM / 4,000 PSI Plunger 18 GPM / 4,000 PSI (Requires 5 Per Pump) 21 TOLL FREE 800.323.1604

BEST PRODUCTS, BEST LOCAL SUPPORT PRESSURE REGULATOR GENERAL CLEANING NOZZLE Designed to regulate and control the maximum water pressure on. Provides safety and protection for the equipment and more importantly, the operator. (A) Part No. 50730-00-S 50023-00-T 24718-00-X No. & Angle Rear Jets Pressure Relief Valve 110 / 4,000 PSI (A) Pressure Relief Valve 53 / 2,500 PSI (B) Pressure Relief Valve 20 / 4,000 PSI (C) (B) (C) WATER PESSURE GAUGE PANEL AND BOTTOM MOUNT Glycerin filled pressure gauges minimize shock load to gauge. Available with panel mount or bottom mount with ¼ pipe thread. Part No. No. & Angle Rear Jets (A) 20035-00-T 20035-01-T 21700-00-X Panel Mount Water Pressure Gauge With Flange - 0-5,000 PSI (A) Panel Mount Water Pressure Gauge Without Flange - 0-5,000 PSI (not shown) Bottom Mount Water Pressure Gauge - 0-5,000 PSI (B) (B) REEL SWIVEL CAST STEEL ROTARY COUPLING This rotary coupling is equipped with adjustable packing, zerk fitting and hard chromed ball bearings. Furnished as original equipment on many jet applications. Available for straight and 90º application. Part No. 50519-00-J 51664-00-T Size 1 NPT 3/4 NPT Description Reel Swivel 90º Reel Swivel 90º 27 TOLL FREE 800.323.1604

Part No. 92942-00-X, revised 12/16 Contents are copyrighted by Sewer Equipment Company of America Products subject to change without notification. Actual products may not be an exact match to product as shown. 800.323.1604 www.mongoosejetters.com