Sanitary Components Catalog

Sanitary Components Catalog

Cleaning Confidence A Commitment to Clean Repeatable results you can count on every time you clean your process parts, lines and equipment. We call it Cleaning Confidence. Sani-Matic, Inc. designs and manufactures automated sanitary process cleaning equipment and components. We offer Clean-Out-of-Place (COP) parts washers, cabinet washers, tunnel washers, Clean-In-Place (CIP) systems, spray balls, strainers and more that provide a complete clean every time. And, we don t stop there. We also provide expert services, including our Tactical Solutions program, to ensure systems are optimized for money-saving efficiencies and increased productivity. We are committed to helping our customers attain sanitary cleaning results for a diverse range of industries, including food, beverage, pharmaceutical, biotech, nutraceutical and personal care. Commit to a change in your sanitary process cleaning approach with Sani-Matic. And, we will commit to improving your operations so you can grow your business. 2

Sanitary Components Catalog In-Line Strainers..................... 4 Straight-Line, Angle-Line, Complete Assemblies and Replacement Parts, Dual Strainer Assemblies and SaniClean Strainers (Direct Replacement for Tri-Clover Strainers) Tee-Line Strainers.................. 20 Complete Assemblies and Replacement Parts Y-Strainers...................... 23 Complete Assemblies and Replacement Parts Table of Contents Basket Strainers................... 28 Complete Assemblies and Replacement Parts Spray Balls...................... 33 Custom and Standard Spray Balls for the Food, Beverage and Bio-Pharm Industries Supply Tubes..................... 38 Single and Double Ball Tee Supply Tubes Tanker Spray Washers................ 42 TS-4 and TS-5, Complete Assemblies and Replacement Parts Accessories...................... 46 COP Baskets, Mushroom Vents, Air Eliminators, Air Vents, Hose Racks, Chemical Pump Assemblies, Mixer/Sparger, Flow-Verter Panels, Steam Regulators, Electric Heaters and More Technical Data.................... 54 Conversion Factors, Viscosity and Specific Gravity Table for Various Foods Capabilities Overview................. 56 Food & Beverage Systems, Bio-Pharm Systems, Sanitary Components and Services. Cleaning is all we do and we do it well. Most items are in stock and available for immediate shipment. Minimum order size applies. Please call for the latest price information. Sani-Matic, Inc. 1915 S. Stoughton Rd., Madison, WI 53716 (p) 800-356-3300 (f) 608-222-5348 SC17.3 3

In-Line Strainers Durable Design, Reliable Performance Sani-Matic offers high-quality, sanitary Angle-Line and Straight-Line Strainers designed for durability and reliable performance. Each Sani-Matic strainer is manufactured in the USA and available for quick delivery. Angle-Line and Straight-Line Strainer bodies require a straining element to filter particulate from the product stream. Both perforated and wedgewire inserts are available and can be used interchangeably. For fine filtration, perforated inserts require either disposable filter tubes or wire mesh overlays. Wedgewire offers an effective and durable single piece insert in micron ratings equivalent to wire mesh. (See pages 8-9 for more information on strainer elements and overlays.) Sani-Matic s standard In-Line Strainers are 3-A approved when using the perforated insert. If 3-A approval is required, contact Sani-Matic to ensure the configuration meets all 3-A standards. 4

Standard Features 316L stainless steel construction throughout Standard tri-clamp connections EPDM tri-clamp gaskets, Teflon encapsulated O-Ring Sanitary finish (32 Ra) except wedgewire element Optional Features Additional finishes and elastomers Dual strainer installation is possible to increase capacity and provide uninterrupted processing Hot water jacket Pressure Drop (psi) Pressure Drop for In-Line Strainer Strainer Size 30 1 1/ 2"x 20 3/ 4" 2"x 20 3/ 4" 25 2 1/ 2"x 20 3/ 4" 3"x 20 3/ 4" 1 1/ 2"x 36" 20 2"x 36" 2 1/ 2"x 36" 3"x 36" 15 10 5 0 In-Line Strainers 0 25 50 75 100 125 150 175 200 225 250 275 300 Flow Rate (gpm) Performance based on testing using 70 F water and 0.015" wedgewire element. Maximum Pressure Rating Tri-Clamp... 120 psi Filter Tubing... 250 psi Perforated Insert.............................................................................. 125 psi Wedgewire Insert... 600 psi Mesh/Micron/Inches Reference Data Mesh Micron Inches 4 4760 0.2030 8 2487 0.0970 10 1600 0.0750 14 1307 0.0510 17 1015 0.0394 20 840 0.0331 25 750 0.0280 30 590 0.0232 32 500 0.0197 40 380 0.0165 45 350 0.0138 50 297 0.0117 60 250 0.0098 70 210 0.0083 80 177 0.0070 100 149 0.0059 120 125 0.0049 140 105 0.0041 170 88 0.0035 200 74 0.0029 230 62 0.0024 270 50 0.0021 325 44 0.0017 400 37 0.0015 550 25 0.0009 800 15 0.0006 1250 10 0.0004 **** 5 0.0002 SC17.3 5

In-Line Strainers Complete Assembly: Straight-Line Strainer 4" dia. body with 3" x 15" element 1 sq. ft. area 4" dia. body with 3" x 30" element 2 sq. ft. area 20 3 /4" 36" Straight-Line Strainer Fitting Size Body OD Recommended Maximum gpm Short (20 3 / 4 ") Perforated Long (36.0") Perforated Short (20 3 / 4 ") Wedgewire Long (36.0") Wedgewire 1.5" 4" 80 S10006 S10016 S10126 S10136 2.0" 4" 120 S10007 S10017 S10127 S10137 2.5" 4" 180 S10008 S10018 S10128 S10138 3.0" 4" 240 S10009 S10019 S10129 S10139 4.0" 4" 300 S10010 S10020 S10130 S10140 Not sure when to clean a strainer? Installing a pressure gauge before and after a strainer can help. When the gauge placed after the strainer drops 8 to 10 psi following the initial flow start-up, you'll know it is time to clean. 6 sanimatic.com

Complete Assembly: Angle-Line Strainer 4" dia. body with 3" x 15" element 1 sq. ft. area 3 5 /32" 4" dia. body with 3" x 30" element 2 sq. ft. area 3 5 /32" 6" dia. body with 4" x 30" element 2.6 sq. ft. area 4 3 /16" In-Line Strainers 20 3 /4" 26 1 /16" 36" 41 5 /16" 40" 46 3 /8" Angle-Line End-Inlet Model (Standard Flow) Fitting Size Body OD Recommended Maximum gpm Short Perforated Long Perforated Short Wedgewire Long Wedgewire 1.5" 4" 80 S10026 S10036 S10146 S10156 2.0" 4" 120 S10027 S10037 S10147 S10157 2.5" 4" 180 S10028 S10038 S10148 S10158 3.0" 4" 240 S10029 S10039 S10149 S10159 4.0" 4" 300 S10030 S10040 S10150 S10160 4.0" 6" 450 N/A S10176 N/A S10175 Angle-Line Side-Inlet Model (Reverse Flow) Fitting Size Body OD Recommended Maximum gpm Short Perforated Long Perforated Short Wedgewire Long Wedgewire 1.5" 4" 80 X10026 X10036 X10146 X10156 2.0" 4" 120 X10027 X10037 X10147 X10157 2.5" 4" 180 X10028 X10038 X10148 X10158 3.0" 4" 240 X10029 X10039 X10149 X10159 4.0" 4" 300 X10030 X10040 X10150 X10160 4.0" 6" 450 N/A X10176 N/A X10175 SC17.3 7

In-Line Strainers Strainer Elements Strainer elements, or strainer inserts, are the filters used to protect your processing equipment and product integrity from unwanted process particles. Both perforated and wedgewire elements provide different straining/filtering advantages. Advantages of Perforated Element 3-A approved when used without mesh overlay Large open area ratio with lower pressure drops Can capture fine particulate with wire mesh overlay and filter tubes Advantages of Wedgewire Element One piece solution Ideal for high purity processing Slot sizes down to 0.002" Increased pressure rating More sanitary than mesh overlay Perforated Strainer Elements Hole Size Body Dia. Open Area Short (15") Long (30") & High Capacity 3/32" 4" 33% 721068 720972 1/8" 4" 40% 720584 720585 1/4" 4" 58% 720411 720412 3/8" 4" 51% 720939 720940 3/32" 6" 33% N/A 720890 1/8" 6" 40% N/A 720799 1/4" 6" 58% N/A 720800 1 /8" Perforated Strainer Element 1 /4" Perforated Strainer Element Wedgewire Strainer Elements Slot Size Body Dia. Wire Mesh Micron Equiv. Rating (approx) Open Area Short (15") Long (30") & High Capacity 0.002" 4" 270 50 4.1% 700323 700334 0.005" 4" 120 125 8% 700324 700335 0.007" 4" 80 177 10% 700325 700336 0.010" 4" 60 250 14% 700326 700337 0.015" 4" 40 380 20% 700327 700338 0.020" 4" 32 500 25% 700328 700339 0.030" 4" 25 750 33% 700329 700340 0.040" 4" 17 1015 40% 700330 700341 0.050" 4" 14 1307 N/A 105611 107682 0.060" 4" 10 1600 50% 700331 700342 0.188" 4" 4 4760 75% 700333 700343 0.005" 6" 120 125 8% N/A 700482 0.007" 6" 80 177 20% N/A 700483 0.015" 6" 40 380 10% N/A 700485 0.060" 6" 10 1600 50% N/A 700489 Wedgewire Strainer Element 8 sanimatic.com

Mesh Overlays (For perforated elements only) Mesh Size Space Btwn Wires (inches) Micron Rating Open Area Short (15") Long (30") 8 0.0970 2487 58% 035251 029664 10 0.0750 1905 56.3% 000717 000701 12 0.0630 1600 54.3% 035252 029665 20 0.0340 864 46.2% 000712 000702 30 0.0210 533 40.8% 000713 000703 40 0.0150 381 36.0% 000714 000704 50 0.0110 280 30.3% 000715 000705 60 0.0092 230 30.5% 000716 000706 80 0.0070 180 31.4% 000718 000708 100 0.0060 140 30.3% 000711 000710 120 0.0046 117 30.5% 000720 000707 150 0.0041 100 37.8% 021276 021274 200 0.0030 74 29.5% 021275 10000048 150 ** 0.0041 100 37.8% N/A 000719 ** 6" OD Strainers. Mesh Overlay In-Line Strainers Filter Tubes 4" OD Body x 20.75" Strainers 4 7 / 8" x 17" Filter Tubes (For 1", 1.5" and 2" connections) Material Width Length (Short) Micron Non-Woven Polyester 4 7 / 8 17 25 032789 Non-Woven Rayon 4 7 / 8 17 40 048602 Polyester Screen 4 7 / 8 17 80 041235 Nylon Multifilament 4 7 / 8 17 150 031264 Polyester Knit 4 7 / 8 17 225 033922 Smooth Weave Dacron 4 7 / 8 17 250 036985 Cotton Cheese Cloth 4 7 / 8 17 300 028476 Nylon Monofilament 4 7 / 8 17 300 046885 Nylon Multifilament 4 7 / 8 17 400 048603 Nylon Leno 4 7 / 8 17 765 031133 Polyester 4 7 / 8 17 1000 028335 4" OD Body x 36" Strainers 4 7 / 8" x 33 1 / 2" Filter Tubes (For 1", 1.5" and 2" connections) Material Width Length (Long) Micron Non-Woven Rayon 4 7 / 8 33 1 / 2 25 028390 Non-Woven Rayon 4 7 / 8 33 1 / 2 40 028857 Polyester Screen 4 7 / 8 33 1 / 2 80 029075 Nylon Multifilament 4 7 / 8 33 1 / 2 150 028395 Polyester Knit 4 7 / 8 33 1 / 2 225 040565 Smooth Weave Dacron 4 7 / 8 33 1 / 2 250 030951 Cotton Cheese Cloth 4 7 / 8 33 1 / 2 300 028797 Plain Weave Polyester 4 7 / 8 33 1 / 2 400 023864 Cotton Flannel 4 7 / 8 33 1 / 2 500 029190 Nylon Monofilament 4 7 / 8 33 1 / 2 500 041618 Nylon Leno 4 7 / 8 33 1 / 2 765 10000044 SC17.3 9

In-Line Strainers Internal Replacement Parts Straight-Line Strainer * Angle-Line Side-Inlet Strainer (Reverse Flow) * Element Retainer Inserts Angle-Line End-Inlet Strainer (Standard Flow) Straight-Line End-Inlet Angle-Line Side-Inlet (reverse flow) Angle-Line End-Inlet (standard flow) * Strainer Element Retainer Inserts Configuration Flow Model Fitting Straight-Line End-Inlet Short 1 1 / 2" 740318 Straight-Line End-Inlet Short 2" 740325 Straight-Line End-Inlet Short 2 1 / 2" 740359 Straight-Line End-Inlet Short 3" 740565 Straight-Line End-Inlet Short 4" 740491 Straight-Line End-Inlet Long 1 1 / 2" 740422 Straight-Line End-Inlet Long 2" 740309 Straight-Line End-Inlet Long 2 1 / 2" 740305 Straight-Line End-Inlet Long 3" 740356 Straight-Line End-Inlet Long 4" 740368 4" OD Strainer Body Configuration Model Fitting Straight-Line Short 1 1 / 2" 740843 Straight-Line Short 2" 740844 Straight-Line Short 2 1 / 2" 740845 Straight Line Short 3" 740846 Straight-Line Short 4" 741141 Straight-Line Long 1 1 / 2" 740847 Straight-Line Long 2" 740848 Straight-Line Long 2 1 / 2" 740849 Straight-Line Long 3" 740850 Straight-Line Long 4" 741142 Angle-Line Side-Inlet Short N/A 740320 Angle-Line Side-Inlet Long N/A 740348 Angle-Line End-Inlet Short N/A 700544 Angle-Line End-Inlet Long N/A 700546 Angle-Line End-Inlet Short (4" TC) N/A 700552 Angle-Line End-Inlet Long (4" TC) N/A 700549 Angle-Line Side-Inlet High Capacity N/A 110123 Angle-Line End-Inlet High Capacity N/A 740622 Angle-Line Short 1 1 / 2" 740835 Angle-Line Short 2" 740836 Angle Line Short 2 1 / 2" 740837 Angle-Line Short 3" 740838 Angle-Line Short 4" 741143 Angle-Line Long 1 1 / 2" 740839 Angle-Line Long 2" 740840 Angle-Line Long 2 1 / 2" 740841 Angle-Line Long 3" 740842 Angle-Line Long 4" 740986 10 sanimatic.com

End Plugs Straight-Line and Angle-Line End-Inlet Only Body Diameter Material 4" Nylon 1 720419 1 4" Teflon 720988 4" Stainless 2 118582 2 6" Stainless 118583 6" UHMW 720616 1 Nylon End Plug is for strainers manufactured before 2007. 2 Stainless End Plug replaces Old 721577. O-Ring Retainers Angle-Line Side-Inlet Only Teflon End Plug Stainless Steel End Plug In-Line Strainers Body Diameter 4" 721488 6" 226783 Retaining Clips 4" O-Ring Retainer 6" O-Ring Retainer Body Diameter Flow 4" Side-Inlet 720408 4" End-Inlet 740295 6" Side-Inlet 320033 6" End-Inlet 740623 Side-Inlet Clip Straight-Line and End-Inlet Clip O-Rings Body Diameter Material 4" Viton 020236 4" EPDM 020503 4" Teflon 024020 6" EPDM 022416 6" Teflon 034355 Note: Teflon is O-Ring standard. Other materials may require lubrication. 4" O-Ring 6" O-Ring See page 26 for body clamp and gasket elastomer replacements. Spare Parts Kit Angle-Line Strainer Includes: O-Ring Retainer or Stainless Steel End Plug, Retainer Clip, 4" Tri-Clamp Gasket & One (1) Frame Seal O-Ring Conversion Kits Angle-Line Strainer Kits are used to reverse flow direction. Includes: Frame, O-Ring Retainer or End Plug, Clip & O-Ring Flow End-Inlet (standard flow) S25725 Side-Inlet (reverse flow) X10177 Flow Short Long End to Side-Inlet S10177 S10180 Side to End-Inlet S10178 S10181 Side to End-Inlet (for 4" tri-clamp and body) S10179 S10182 SC17.3 11

Closed for cleaning In-Line Strainers Dual Strainer Assembly Dual Angle-Line Strainer Assembly A Full Assembly includes a Strainer Stand, Valve Kit and two (2) Strainers Fitting Size Body O.D Long (36") Perforated Long (36") Wedgewire 1.5" 4" S10036DUAL S10156DUAL 2.0" 4" S10037DUAL S10157DUAL 2.5" 4" S10038DUAL S10158DUAL 3.0" 4" S10039DUAL S10159DUAL 4.0" 4" S10040DUAL S10160DUAL NOTE: Refer to Page 10 for standard perforated and wedgewire insert options. Line remains open 12 sanimatic.com

Valve Kit with VNE Butterfly Valves Kit includes: Four (4) Elbows, two (2) Tees, four (4) Valves, twelve (12) Clamps, twelve (12) Gaskets and one (1) Stand. Material: 316L Stainless Steel Alternate valves available. Note: Strainers are not included in the valve kit, they are sold separately. Optional Valve Actuating Mechanism These valves offer a one-step control for simultaneous control of all four butterfly valves for the strainer assembly. The interlocking control puts one strainer on-line and the other strainer off-line. To ensure operator safety, insert access is limited to the off-line strainer. Will work with standard butterfly valves only. Fitting Size 1.5" 122606 2.0" 122607 2.5" 122608 3.0" 122609 4.0" 122610 Fitting Size 3.0" 132128 Additional fitting size options are available. In-Line Strainers Material: 316L Stainless Steel Line remains open Closed for cleaning Pressure Gauge Kit Two (2) Sanitary Diaphragm-type Pressure Gauges, two (2) Tees, four (4) Gaskets and four (4) Clamps. Install before and after the strainer assembly. Fitting Size 1.5" 158581 2.0" 158585 2.5" 158591 3.0" 158593 4.0" 158596 SC17.3 13

In-Line Strainers SaniClean TM Strainers The SaniClean strainer is a direct replacement for a Tri-Clover style strainer. Constructed with 316L stainless steel, this high-quality alternative gives you a choice for your in-line strainer needs. Wire mesh overscreens with longitudinal seams fit over the heavy gauge perforated cores to ensure a consistent diameter for the full length of the cylinder. Hemmed seams are tacked in place to provide a finished smooth edge. Complete Strainer Assemblies Assemblies Include: Filter Body, Outlet Assembly, Distributor Cap, Spring, Clamp, Gasket (Buna-N), Perforated Element (Support Core). In-Line Strainers: Tri-Clamp Connections, 4" OD x 15.75", 3" Element Description Fitting Size Perf Size Element Size SHORT - 1 / 4" Perf, Tri-Clamp 1.0" 1 / 4" 3.0" x 10 7 / 8" 5009000 SHORT - 1 / 8" Perf, Tri-Clamp 1.0" 1 / 8" 3.0" x 10 7 / 8" 5009005 SHORT - 1 / 4" Perf, Tri-Clamp 1.5" 1 / 4" 3.0" x 10 7 / 8" 5009010 SHORT - 1 / 8" Perf, Tri-Clamp 1.5" 1 / 8" 3.0" x 10 7 / 8" 5009015 SHORT - 1 / 4" Perf, Tri-Clamp 2.0" 1 / 4" 3.0" x 10 7 / 8" 5009020 SHORT - 1 / 8" Perf, Tri-Clamp 2.0" 1 / 8" 3.0" x 10 7 / 8" 5009025 In-Line Strainers: Tri-Clamp Connections, 4.5" OD x 15.75", 3.5" Element Description Fitting Size Perf Size Element Size SHORT - 1 / 4" Perf, Tri-Clamp 2.5" 1 / 4" 3.5" x 10 7 / 8" 5009030 SHORT - 1 / 8" Perf, Tri-Clamp 2.5" 1 / 8" 3.5" x 10 7 / 8" 5009035 SHORT - 1 / 4" Perf, Tri-Clamp 3.0" 1 / 4" 3.5" x 10 7 / 8" 5009040 SHORT - 1 / 8" Perf, Tri-Clamp 3.0" 1 / 8" 3.5" x 10 7 / 8" 5009045 SHORT - 1 / 4" Perf, Tri-Clamp 4.0" 1 / 4" 3.5" x 10 7 / 8" 5009100 SHORT - 1 / 8" Perf, Tri-Clamp 4.0" 1 / 8" 3.5" x 10 7 / 8" 5009110 In-Line Strainers: Tri-Clamp Connections, 4" OD x 35.38", 3" Element Description Fitting Size Perf Size Element Size LONG - 1 / 4" Perf, Tri-Clamp 1.0" 1 / 4" 3.0" x 30 3 / 4" 5009050 LONG - 1 / 8" Perf, Tri-Clamp 1.0" 1 / 8" 3.0" x 30 3 / 4" 5009055 LONG - 1 / 4" Perf, Tri-Clamp 1.5" 1 / 4" 3.0" x 30 3 / 4" 5009060 LONG - 1 / 8" Perf, Tri-Clamp 1.5" 1 / 8" 3.0" x 30 3 / 4" 5009065 LONG - 1 / 4" Perf, Tri-Clamp 2.0" 1 / 4" 3.0" x 30 3 / 4" 5009070 LONG - 1 / 8" Perf, Tri-Clamp 2.0" 1 / 8" 3.0" x 30 3 / 4" 5009075 In-Line Strainers: Tri-Clamp Connections, 4.5" OD x 35.38", 3.5" Element Description Fitting Size Perf Size Element Size LONG - 1 / 4" Perf, Tri-Clamp 2.5" 1 / 4" 3.5" x 30 3 / 4" 5009080 LONG - 1 / 8" Perf, Tri-Clamp 2.5" 1 / 8" 3.5" x 30 3 / 4" 5009085 LONG - 1 / 4" Perf, Tri-Clamp 3.0" 1 / 4" 3.5" x 30 3 / 4" 5009090 LONG - 1 / 8" Perf, Tri-Clamp 3.0" 1 / 8" 3.5" x 30 3 / 4" 5009095 LONG - 1 / 4" Perf, Tri-Clamp 4.0" 1 / 4" 3.5" x 30 3 / 4" 5009105 LONG - 1 / 8" Perf, Tri-Clamp 4.0" 1 / 8" 3.5" x 30 3 / 4" 5009115 14 sanimatic.com

In-Line Strainers: Perforated Elements (Support Cores) Description Fitting Size 3" Diameter Back-Up Tube: SHORT - 1 / 8" dia. holes 1.0", 1.5", & 2.0" 5005010 Back-Up Tube: SHORT - 1 / 4" dia. holes 1.0", 1.5", & 2.0" 5005030 Back-Up Tube: LONG - 1 / 8" dia. holes 1.0", 1.5", & 2.0" 5005050 Back-Up Tube: LONG - 1 / 4" dia. holes 1.0", 1.5", & 2.0" 5005070 Description Fitting Size 3.5" Diameter Back-Up Tube: SHORT - 1 / 8" dia. holes 2.5" & 3.0" 5006090 Back-Up Tube: SHORT - 1 / 4" dia. holes 2.5" & 3.0" 5006100 Back-Up Tube: LONG - 1 / 8" dia. holes 2.5" & 3.0" 5006120 Back-Up Tube: LONG - 1 / 4" dia. holes 2.5" & 3.0" 5006130 In-Line Strainers Filter Tubes 5" OD Body 5 5 / 8" x 13 1 / 2" Filter Tubes (For 2.5" and 3" connections) Material Width Length Micron Non-Woven Rayon 5 5 / 8 13 1 / 2 40 031840 Polyester Screen 5 5 / 8 13 1 / 2 80 048624 Nylon Multifilament 5 5 / 8 13 1 / 2 150 048625 Polyester Knit 5 5 / 8 13 1 / 2 225 048626 Smooth Weave Dacron 5 5 / 8 13 1 / 2 250 048627 Cotton Cheese Cloth 5 5 / 8 13 1 / 2 300 029189 Nylon Monofilament 5 5 / 8 13 1 / 2 300 048628 Nylon Monofilament 5 5 / 8 13 1 / 2 400 048629 Cotton Flannel 5 5 / 8 13 1 / 2 500 033778 Nylon Monofilament 5 5 / 8 13 1 / 2 500 048630 Nylon Leno 5 5 / 8 13 1 / 2 765 048631 5" OD Body 5 5 / 8" x 33 1 / 2" Filter Tubes (For 2.5" and 3" connections) Material Width Length Micron Non-Woven Rayon 5 5 / 8 33 1 / 2 25 029473 Non-Woven Rayon 5 5 / 8 33 1 / 2 40 030660 Polyester Screen 5 5 / 8 33 1 / 2 80 048604 Nylon Multifilament 5 5 / 8 33 1 / 2 150 035341 Polyester Knit 5 5 / 8 33 1 / 2 225 038186 Smooth Weave Dacron 5 5 / 8 33 1 / 2 250 035342 Cotton Cheese Cloth 5 5 / 8 33 1 / 2 300 032668 Nylon Monofilament 5 5 / 8 33 1 / 2 300 048605 Nylon Monofilament 5 5 / 8 33 1 / 2 400 039161 Plain Weave Polyester 5 5 / 8 33 1 / 2 400 048606 Cotton Flannel 5 5 / 8 33 1 / 2 500 048607 Nylon Monofilament 5 5 / 8 33 1 / 2 500 048608 Nylon Leno 5 5 / 8 33 1 / 2 765 048609 SC17.3 15

In-Line Strainers SaniClean In-Line Strainers Replacement Parts Clamp Distributor Cap Gasket Perforated Element Outlet Assembly Spring Filter Body Clamp Fitting Size Body OD 1" / 1.5" / 2" 4.0" 5000750 2.5" / 3" / 4" 4.5" 5000850 Distributor Cap Fitting Size Body OD 1" / 1.5" / 2" 4.0" 5000730 2.5" / 3" / 4" 4.5" 5001030 Gaskets 4" Body OD 4.5" Body OD Description Fitting Size Fitting Size Buna-N (Standard) 1" / 1.5" / 2" 5000760 2.5" / 3" / 4" 5000765 Silicon 1" / 1.5" / 2" 5000770 2.5" / 3" / 4" 5000775 EPDM 1" / 1.5" / 2" 5000780 2.5" / 3" / 4" 5000785 Viton-SFY 1" / 1.5" / 2" 5000790 2.5" / 3" / 4" 5000795 16 sanimatic.com

Perforated Elements Description Fitting Size Element Size SHORT - 1 / 4" Perf 1" / 1.5" / 2" 3.0" x 10 7 / 8" 5005030 SHORT - 1 / 8" Perf 1" / 1.5" / 2" 3.0" x 10 7 / 8" 5005010 LONG - 1 / 4" Perf 1" / 1.5" / 2" 3.0" x 10 7 / 8" 5005070 LONG - 1 / 8" Perf 1" / 1.5" / 2" 3.0" x 10 7 / 8" 5005050 Description Fitting Size Element Size SHORT - 1 / 4" Perf 2.5" / 3" / 4" 3.5" x 10 7 / 8" 5006100 SHORT - 1 / 8" Perf 2.5" / 3" / 4" 3.5" x 10 7 / 8" 5006090 LONG - 1 / 4" Perf 2.5" / 3" / 4" 3.5" x 10 7 / 8" 5006130 LONG - 1 / 8" Perf 2.5" / 3" / 4" 3.5" x 10 7 / 8" 5006120 In-Line Strainers Outlet Assembly/Clamped Connection (Lid) Clamped Fitting Size Bevel Seat Fitting Size 1.0" 5000700 1.0" 5000705 1.5" 5000800 1.5" 5000805 2.0" 5000900 2.0" 5000905 2.5" 5001000 2.5" 5001005 3.0" 5002000 3.0" 5002005 4.0" 5003000 4.0" 5003005 Spring Fitting Size Body OD 1" / 1.5" / 2" 4.0" 5000740 2.5" / 3" / 4" 4.5" 5001040 Filter Body Short Body Long Body Clamped Fitting Size 1.0" 5000710 5000720 1.5" 5000810 5000820 2.0" 5000910 5000920 2.5" 5001010 5001020 3.0" 5002010 5002020 4.0" 5003010 5003030 SC17.3 17

In-Line Strainers Mesh Overscreens for SaniClean In-Line and Side-Inlet Strainers Description 3" dia. x 10 7 /8" lg. Mesh Count Wire Mesh Overscreen 10 x 10 5000010 Wire Mesh Overscreen 12 x 12 5000020 Wire Mesh Overscreen 14 x 14 5000030 Wire Mesh Overscreen 16 x 16 5000040 Wire Mesh Overscreen 18 x 18 5000050 Wire Mesh Overscreen 20 x 20 5000060 Wire Mesh Overscreen 24 x 24 5000070 Wire Mesh Overscreen 30 x 30 5000080 Wire Mesh Overscreen 40 x 40 5000090 Wire Mesh Overscreen 50 x 50 5000095 Wire Mesh Overscreen 60 x 60 5000100 Wire Mesh Overscreen 80 x 80 5000110 Wire Mesh Overscreen 100 x 100 5000120 Wire Mesh Overscreen 120 x 120 5000130 Wire Mesh Overscreen 150 x 150 5000140 Wire Mesh Overscreen 200 x 200 5000150 Description 3" dia. x 30 3 /4" lg. Mesh Count Wire Mesh Overscreen 10 x 10 5000510 Wire Mesh Overscreen 12 x 12 5000520 Wire Mesh Overscreen 14 x 14 5000530 Wire Mesh Overscreen 16 x 16 5000540 Wire Mesh Overscreen 18 x 18 5000550 Wire Mesh Overscreen 20 x 20 5000560 Wire Mesh Overscreen 24 x 24 5000570 Wire Mesh Overscreen 30 x 30 5000580 Wire Mesh Overscreen 40 x 40 5000590 Wire Mesh Overscreen 50 x 50 5000595 Wire Mesh Overscreen 60 x 60 5000600 Wire Mesh Overscreen 80 x 80 5000610 Wire Mesh Overscreen 100 x 100 5000620 Wire Mesh Overscreen 120 x 120 5000630 Wire Mesh Overscreen 150 x 150 5000640 Wire Mesh Overscreen 200 x 200 5000650 18 sanimatic.com

Mesh Overscreens for SaniClean In-Line and Side-Inlet Strainers Description 3 1 /2" dia. x 10 7 /8" lg. Mesh Count Wire Mesh Overscreen 10 x 10 5000160 Wire Mesh Overscreen 12 x 12 5000170 Wire Mesh Overscreen 14 x 14 5000180 Wire Mesh Overscreen 16 x 16 5000190 Wire Mesh Overscreen 18 x 18 5000200 Wire Mesh Overscreen 20 x 20 5000210 In-Line Strainers Wire Mesh Overscreen 24 x 24 5000220 Wire Mesh Overscreen 30 x 30 5000230 Wire Mesh Overscreen 40 x 40 5000240 Wire Mesh Overscreen 50 x 50 5000245 Wire Mesh Overscreen 60 x 60 5000250 Wire Mesh Overscreen 80 x 80 5000260 Wire Mesh Overscreen 100 x 100 5000270 Wire Mesh Overscreen 120 x 120 5000280 Wire Mesh Overscreen 150 x 150 5000290 Wire Mesh Overscreen 200 x 200 5000300 Description 3 1 /2" dia. x 30 3 /4" lg. Mesh Count Wire Mesh Overscreen 10 x 10 5000310 Wire Mesh Overscreen 12 x 12 5000320 Wire Mesh Overscreen 14 x 14 5000330 Wire Mesh Overscreen 16 x 16 5000340 Wire Mesh Overscreen 18 x 18 5000350 Wire Mesh Overscreen 20 x 20 5000360 Wire Mesh Overscreen 24 x 24 5000370 Wire Mesh Overscreen 30 x 30 5000380 Wire Mesh Overscreen 40 x 40 5000390 Wire Mesh Overscreen 50 x 50 5000395 Wire Mesh Overscreen 60 x 60 5000400 Wire Mesh Overscreen 80 x 80 5000410 Wire Mesh Overscreen 100 x 100 5000420 Wire Mesh Overscreen 120 x 120 5000430 Wire Mesh Overscreen 150 x 150 5000440 Wire Mesh Overscreen 200 x 200 5000450 SC17.3 19

Tee-Line Strainers Protect Your Pumps and Equipment Sani-Matic Tee-Line Strainers are designed to keep materials out of your pumps and process equipment. And, because the Sani-Matic Tee-Line Strainer s open area of perforation exceeds line size diameter, there is zero pressure drop. Engineered with simplicity and durability in mind, the tri-clamp allows quick removal of the insert assembly for easy cleaning. We recommend purchasing the complete assembly tee, insert, gasket and tri-clamp to ensure a proper fit. 20

Standard Features 316L stainless steel construction Tri-clamp connection Compact design Open area of perforation exceeds line size diameter Bead blast finish EPDM gasket Optional Features Choice of 1 4" / or 1 8" / perforations for inserts Insert alignment pin available Able to upgrade from a bead blast finish to 32 Ra Other fitting types available Viton and Teflon gaskets are available Tee-Line Strainers Insert Length A Insert Gasket Clamp Tee-Line Strainer Body B Face-to-Face Dimension Want an economical and easy way to prolong the life of your equipment? Install Tee-Line Strainers at the suction end of the pump to protect the pump, process equipment and valves from foreign materials, such as gasket pieces, bolts and other items. SC17.3 21

Tee-Line Strainers Complete Assembly Tri-clamp Fitting Size Perforation Size Face-to-Face Tee Dim. - B 1.5" 1 / 8" 5.5" 105712 1.5" 1 / 4" 5.5" 105727 2.0" 1 / 8" 7.0" 105719 2.0" 1 / 4" 7.0" 105730 2.5" 1 / 8" 7.0" 105721 2.5" 1 / 4" 7.0" 105732 3.0" 1 / 8" 7.5" 105723 3.0" 1 / 4" 7.5" 105734 4.0" 1 / 8" 9.0" 105725 4.0" 1 / 4" 9.0" 105736 6.0" 1 / 8" 13.0" 110165 6.0" 1 / 4" 13.0" 110166 NOTE: Assembly includes strainer body, insert, EPDM gasket and clamp. If not using a Sani-Matic Tee-Line Strainer body, customer must supply a tee-line strainer body to match insert length. Insert Only Tri-clamp Fitting Size Insert Length A Face-to-Face Tee Dim. - B Perf. Size 1.5" 3.50" 5.5" 1 / 8" 740754 1.5" 3.50" 5.5" 1 / 4" 740759 2.0" 4.50" 7.0" 1 / 8" 740755 2.0" 4.50" 7.0" 1 / 4" 740760 2.5" 4.75" 7.0" 1 / 8" 740756 2.5" 4.75" 7.0" 1 / 4" 740761 3.0" 5.25" 7.5" 1 / 8" 740757 3.0" 5.25" 7.5" 1 / 4" 740762 4.0" 6.50" 9.0" 1 / 8" 740758 4.0" 6.50" 9.0" 1 / 4" 740763 6.0" 9.375" 13.0" 1 / 8" 740991 6.0" 9.375" 13.0" 1 / 4 741035 22 NOTE: Inserts do not include a Tee-Line Strainer body, gasket or clamps. Insert alignment pins are available for an additional cost. sanimatic.com

Y-Strainers Small Footprint, Big Increase in Productivity Sani-Matic Y-Strainers are designed to fit into tight piping configurations and provide quick access to the straining insert for easy cleaning. The high-quality, durable strainers are made in the USA, which allows fast turnaround times. Sani-Matic s standard Y-Strainers are 3-A approved when using the perforated insert. If 3-A approval is required, contact Sani-Matic to ensure the configuration meets all 3-A standards. Sani-Matic Y-Strainers are engineered with a close-tolerance fitment (0.010") at the base of the insert and do not require an O-Ring. Fewer parts result in faster, more effective cleaning and increased performance to save you time and money. 23

Y-Strainers Standard Features 316L stainless steel construction Standard tri-clamp connections EPDM tri-clamp gaskets Perforated or wedgewire strainer inserts are interchangeable Sanitary finish (32 Ra) - except wedgewire insert Close-tolerance fitment at base of insert (see Figure 1) Optional Features Figure 1 Wire mesh overlays for use with perforated insert Additional finishes and elastomers available Hot water jackets available in 4" strainer bodies only Maximum Pressure Rating Tri-Clamp... 120 psi Filter Tubing... 250 psi Perforated Insert.............................................................................. 125 psi Wedgewire Insert... 600 psi Cv Values for Y-Strainer Insert size Fitting Size 1.5" 2.0" 2.5" 3.0" WW 0.002" 36 47 55 86 WW 0.005" 39 70 103 109 WW 0.010" 39 71 111 125 WW 0.015" 39 72 112 137 WW 0.020" 39 73 113 143 WW 0.030" 39 73 116 152 WW 0.040" 39 73 121 160 WW 0.060" 39 76 125 165 Perf. 1 / 8 " 38 72 115 148 Perf. 1 / 4 " 38 75 122 159 Pressure drop for 70 F water can be calculated using the following formula: psi = (gpm/cv) 2. Pressure Drop (psi) 30 25 20 15 10 5 0 Pressure Drop for Y-Strainer Performance based on testing using 70 F water and 0.015" wedgewire inserts. Strainer Size 1-1/2" 0 25 50 75 100 125 150 175 200 225 250 275 300 Flow Rate (gpm) 2" 2-1/2" 3" 24 sanimatic.com

Complete Assembly 4" Body - 0.7 ft 2 Surface Area The assembly price includes strainer body, choice of insert, gasket and clamp. Port Size Face-to-Face Dimension Recommended Maximum gpm Perforated Wedgewire 1.5" 10" 80 Y10015 Y20015 Face-to-Face Dimension Y-Strainers 2.0" 11" 120 Y10020 Y20020 2.5" 12" 180 Y10025 Y20025 3.0" 14" 240 Y10030 Y20030 6" Body - 1.0 ft 2 Surface Area Port Size Face-to-Face Dimension Recommended Maximum gpm Perforated Wedgewire 4.0" 17" 500 Y10040 Y20040 4" Body - 0.7 ft 2 Surface Area with Metaglas Dual Sight Glass The assembly price includes strainer body, choice of insert, gasket, clamp and Metaglas dual sight glass. Port Size Face-to-Face Dimension Recommended Maximum gpm Perforated Wedgewire 1.5" 10" 80 Y10115 Y20115 2.0" 11" 120 Y10120 Y20120 2.5" 12" 180 Y10125 Y20125 3.0" 14" 240 Y10130 Y20130 6" Body - 1.0 ft 2 Surface Area with Metaglas Dual Sight Glass Port Size Face-to-Face Dimension Recommended Maximum gpm Perforated Wedgewire 4.0" 17" 500 Y10140 Y20140 Strainer Insert Strainer Body Clamp Sight Glass Replacement Gasket Elastomer SC17.3 25

Y-Strainers Y-Strainer Replacement Parts 4 3 1 5 2 1 Strainer Inserts Perforated Insert For 4" Body For 6" Body Size 1 / 8 " 700226 700513 1 / 4 " 240959 700524 Wedgewire Insert For 4" Body For 6" Body Size 0.010" 700232 700504 0.015" 700164 700505 0.020" 700234 700506 0.030" 700236 700507 0.040" 700238 700508 0.060" 700240 700509 0.188" 117417 700510 2 Clamps For 4" Body For 6" Body 020225 020976 3 Gasket Elastomers 26 For 4" Body For 6" Body Material Buna 020226 020263 EPDM (standard) 021031 022975 Viton 020474 023847 sanimatic.com

4 Strainer Body Fitting Size 4" Body - Standard 4" Body - Sight Glass 1.5" 700249 103786 2.0" 700243 103779 2.5" 700245 103801 3.0" 700247 103805 Fitting Size 6" Body - Standard 6" Body - Sight Glass 4.0" 700471 103810 Y-Strainers 5 Sight Glass Replacement Description 2.5" Tri-Clamp Metaglas single replacement lens 036638* *NOTE: Rated at 200 psi @ 536 F. *NOTE: Sight glass single replacement includes one clamp, lens and gasket. Filter Tubes 4" OD Body* 4 7 / 8" x 13 1 / 2" Filter Tubes (For 1", 1.5" and 2" connections) Material Width Length Micron Non-Woven Rayon 4 7 / 8 13 1 / 2 25 044646 Rayon 4 7 / 8 13 1 / 2 40 037853 Polyester Screen 4 7 / 8 13 1 / 2 80 048599 Nylon Multifilament 4 7 / 8 13 1 / 2 150 043742 Polyester Knit 4 7 / 8 13 1 / 2 225 048600 Smooth Weave Dacron 4 7 / 8 13 1 / 2 250 042234 Cotton Cheese Cloth 4 7 / 8 13 1 / 2 300 048601 Nylon Monofilament 4 7 / 8 13 1 / 2 400 031126 Plain Weave Polyester 4 7 / 8 13 1 / 2 400 043743 *Filter tube use on Y-Strainers requires a custom strainer insert. Wire Mesh Overlays (For Y-Strainers using perforated inserts) Wire Mesh Overlay - 4" Body Mesh Count 10 mesh 032867 20 mesh 032868 30 mesh 032869 40 mesh 032870 50 mesh 032871 60 mesh 032872 80 mesh 032873 100 mesh 032874 120 mesh 032875 Wire Mesh Overlay - 6" Body Mesh Count 10 mesh 032876 20 mesh 032877 30 mesh 032878 40 mesh 032879 50 mesh 032880 60 mesh 032881 80 mesh 032882 100 mesh 032883 120 mesh 032884 NOTE: Use of wire mesh overlay is not compliant with 3-A standard. SC17.3 27

Basket Strainers High Volume, High Performance Sani-Matic Basket Strainers are specially constructed to strain particulates out of a high-volume process stream. The innovative, durable design includes a side-inlet, which allows you to easily remove the basket for cleaning without disconnecting the line. Our Basket Strainers can be equipped with either a wedgewire or perforated insert. Filter bags can be used for finer straining applications and are available in a wide variety of media types and micron sizes. The strainer's lid and hand knob closure are rated for higher pressures than clamp-style covers, which improves operator safety. Sani-Matic s standard Basket Strainers are 3-A approved when using the perforated insert. If 3-A approval is required, contact Sani-Matic to ensure the configuration meets all 3-A standards. 28

Standard Features Cast and heavy-gauge 316L stainless steel construction Air relief vent valve included with complete assembly Rated to 100 psi maximum @ 200 F Side inlet Two sizes: short and long Machined O-Ring seat Long model: Approximate weight, 110 lbs., Surface area, 3.7 ft 2 Short model: Approximate weight, 130 lbs., Surface area, 1.6 ft 2 Optional Features Disposable filter bags for perforated inserts (Note: Filter bags require clamp ring and locking latch and are sold separately.) Long and short strainer stands available Basket Strainers Pressure Drop for Basket Strainer 7 Strainer Size 4 " x 22 " 6 5 Pressure Drop (psi) 4 3 2 1 0 0 50 100 150 200 250 300 350 400 450 500 550 600 Flow Rate (gpm) Performance based on testing using 70 F water and 4" x 22" housing with 0.005" wedgewire insert. Need to capture a large amount of particulate from your high-volume process? Sani-Matic Basket Strainers maintain a large surface area to capture heavy particle loads from your process. The durable insert captures most particulate from your process within the basket, and its machined O-Ring seat prevents fluid bypass to maintain product integrity. SC17.3 29

Basket Strainers Complete Assembly With Perforated Strainer Insert Complete assembly includes strainer body, insert, cover O-Ring, insert O-Ring, air relief vent valve and vent valve gasket. Specify perforated insert's hole size when ordering ( 1 / 8", 3 / 16" or 1 / 4"). Fitting Size Recommended Maximum gpm - Short (22") - Long (37") 1.5" 80 S10501 S10505 2.0" 120 S10502 S10506 2.5" 180 S10503 S10507 3.0" 240 S10504 S10508 4.0" 300 S10520 S10509 Note: If using a filter bag with perforated insert, a clamp ring and locking latch are required and sold separately. With Wedgewire Strainer Insert Specify slot size when ordering (0.005", 0.015" or 0.030"). Fitting Size Recommended Maximum gpm - Short (22") - Long (37") 1.5" 80 S10510 S10515 2.0" 120 S10511 S10516 2.5" 180 S10512 S10517 3.0" 240 S10513 S10518 4.0" 300 S10514 S10519 8" 8" 22" 37" Strainer Stand Description 7" Surface Area: 1.6 ft 2 Long Model 741065 Short Model 101998 7" Surface Area: 3.7 ft 2 Long Model Strainer Stand (37") Short Model Strainer Stand (22") 52 3 /4" 38 13 /16" 30 3 /4" 15 3 /4" 16 13 /16" 22 7 /16" 17 9 /16" 22 5 /8" 17 3 /4" 30 sanimatic.com

Basket Strainer Replacement Parts Cover Hold Down Parts Air Relief Vent Valve Filter Bag Locking Latch Filter Bag Clamp Ring Basket Strainers Filter Bag Perforated Insert Insert O-Ring 1 Strainer Inserts Description Short Model Long Model Perforated 1 / 8 " Holes 741039 741052 3 / 16 " Holes 741040 741053 1 / 4 " Holes 741051 741054 Wedgewire* 0.005" 741022 741047 0.015" 741030 741048 0.030" 741046 741049 *Other sizes are available. Short Model Wedgewire Insert Long Model Perforated Insert 2 Basket Strainer O-Ring/Gasket Cover O-Ring EPDM (standard) 021378 Viton 021144 Element O-Ring EPDM (standard) 021356 Viton 021143 Vent Valve Gasket EPDM (standard) 021037 Viton 028725 Cover O-Ring Vent Valve Gasket Insert O-Ring SC17.3 31

Basket Xyzhijklmnop Strainers Basket Strainer Replacement Parts 3 Disposable Filter Bags 50 per box SMI 22" Short Model Basket Strainers Micron Model Material 1 22" Short Polypropylene 029244 5 22" Short Polypropylene 029245 10 22" Short Polypropylene 029246 10 22" Short Polyester Felt 031955 25 22" Short Polyester 040134 25 22" Short Polypropylene 029247 50 22" Short Polypropylene 029237 100 22" Short Polypropylene 029248 150 22" Short Nylon 029249 400 22" Short Nylon 040903 400 22" Short Polypropylene Monofilament 045387 600 22" Short Nylon Mesh 043768 800 22" Short Nylon 029250 1500 22" Short Polyester 029251 SMI 37" Long Model Basket Strainers 1 37" Long Polypropylene 029252 5 37" Long Polypropylene 029253 10 37" Long Polypropylene 029254 25 37" Long Polypropylene 029255 50 37" Long Polypropylene 029256 50 37" Long Polyester 034820 100 37" Long Polypropylene 029257 100 37" Long Nylon 031268 150 37" Long Nylon 029259 250 37" Long Nylon 026262 300 37" Long Nylon 024098 400 37" Long Nylon 042110 600 37" Long Polypropylene 036642 800 37" Long Nylon 029261 1500 37" Long Polyester 029262 Filter Bag Notes: Filter bags are 7" diameter Sewn-in, stainless steel ring in top Filter bags require a media clamp ring & locking latch All bags are FDA compliant Micron rating is industry standard nominal rating with 75% efficiency 95% efficiency filter bags are available upon request 4 Filter Bag Clamp Parts Description Filter Bag Kit* 105937 Clamp Ring 641110 Locking Latch 621766 *Includes clamp ring and locking latch. Clamp Ring Locking Latch 5 Cover Hold-down Parts Description A Threaded Knob 021385 B Swing Bolt 177476 C Swing Bolt Clevis Pin 021382 C Cover Hinge Clevis Pin 021383 D Pin, Hair Pin 021384 Air Relief Vent Valve Description Air Relief Vent Valve with 1 / 2" Connection 021881 32 sanimatic.com

Spray Balls Spray Solutions Designed for Your Process Sani-Matic has decades of experience in spray technology for the food & beverage and bio-pharm industries. We will evaluate your application needs to design and manufacture a spray solution with appropriate flows, pressures and spray patterns to ensure efficient and dependable cleaning for your specific process equipment. Sani-Matic is 3-A approved for its standard spray ball design when used with a wraparound clip. When considering a custom spray ball, there is the possibility that the spray ball will not conform to 3-A requirements. If a custom 3-A approved spray ball is required, contact Sani-Matic. 33

Spray Balls Standard Features 316L stainless steel 32 Ra finish Sanitary polished ball Each ball includes wraparound clip Standard drilling is 40 gpm @ 25 psi Slip-fit collar Spherical hemisphere Optional Features Custom drilling available (Drill Pattern: SB-3) Material certification available Orbital welding and directional drilling Supply Tubes, see pages 38-41 2.5" tangential hemisphere available Calculate recommended minimum flow rate for cleaning vertical process vessels: Enter tank diameter (D) in feet = Spray Ball gpm = (9.5 x tank diameter in feet) A minimum flow rate of 3 gallons per minute, per foot (tank circumference) is required to produce sufficient turbulent flow to cascade solution down vessel walls. Spray Ball Dimensions Ball Diameter 4.0" 3.0" 2.5" 2.0" 1.5" 1.25" A B C D E F Ø 2" 1" Ø 13 / 64" 5 15 / 16" 55 5 1 / 2" Ø 1 1 / 2" 3 / 4" Ø 13 / 64" 5 7 / 8" 62 5 7 / 16" Ø 1" 3 / 8" Ø 9 / 64" 5 3 / 8" 70 5" Ø 2" 1" Ø 13 / 64" 4 13 / 16" 42 4 3 / 8" Ø 1 1 / 2" 3 / 4" Ø 13 / 64" 4 13 / 16" 55 4 3 / 8" Ø 1" 3 / 8" Ø 9 / 64" 4 5 / 16" 67 3 15 / 16" Ø 1 1 / 2" 3 / 4" Ø 13 / 64" 4 11 / 32" 48 3 29 / 32" Ø 1" 3 / 8" Ø 9 / 64" 3 25 / 32" 62 3 13 / 32" Ø 1" 3 / 8" Ø 9 / 64" 3 1 / 4" 55 2 7 / 8" Ø 3 / 4" 1 / 4" Ø 9 / 64" 3 1 / 16" 62 2 11 / 16" Ø 1" 3 / 8" Ø 9 / 64" 2 11 / 16" 41 2 5 / 16" Ø 3 / 4" 1 / 4" Ø 9 / 64" 2 17 / 32" 55 2 5 / 32" Ø 1 / 2" 3 / 16" Ø 5 / 64" 2 9 / 16" 61 2 3 / 32" Ø 3 / 4" 1 / 4" Ø 9 / 64" 2 1 / 4" 42 1 7 / 8" Ø 1 / 2" 3 / 16" Ø 5 / 64" 2 5 / 16" 57 1 27 / 32" NOTE: Custom spray balls will require a longer lead time. A C B D E (MAX) F Solution Tube Pinhole Location for Proper Fit with Spray Ball Tube A Distance B Drill Diameter C 1 / 2" 3 / 16" 5 / 64" C 3 / 4" 3 / 16" 9 / 64" 1" 5 / 16" 9 / 64" 1 1 / 2" 11 / 16" 13 / 64" 2" 15 / 16" 13 / 64" A B 34 sanimatic.com

Spray Balls Standard Products Stock Spray Balls Description Drill Pattern Ball Diameter Connection Size Connection Style gpm psi Finish 180 Up - Vertical Mount SB-1 2.50 1.50 SC 40 25 32 Ra 128271 180 Up - Vertical Mount SB-1 3.00 1.50 SC 40 25 32 Ra 131028 180 Up - Double Ball (each ball) SB-2 4.00 1.50 SC 40 25 32 Ra 128272 360 Full Coverage SB-5 1.50 0.75 SC 40 25 32 Ra 128277 360 Full Coverage SB-5 1.50 1.00 SC 40 25 32 Ra 199108 360 Full Coverage SB-5 2.00 1.00 SC 40 25 32 Ra 128276 360 Full Coverage SB-5 2.50 1.00 PN 58 20 32 Ra 117503 360 Full Coverage SB-5 2.50 1.50 SC 40 25 32 Ra 128275 360 Full Coverage SB-5 3.00 1.50 SC 40 25 32 Ra 128274 360 Full Coverage SB-5 4.00 1.50 SC 40 25 32 Ra 128273 NOTE: Clip included. NOTE: Diagrams for standard drill patterns are shown on page 36. Stock Spray Clips Description Hair Pin Clip for 0.50" SC* 321443 Wraparound Clip for 0.75" SC 321554 Wraparound Clip for 1.00" SC 321555 Wraparound Clip for 1.50" SC 321556 Wraparound Clip for 2.00" SC 321557 *0.50" Clip diameter does not conform to 3-A standard. SC17.3 35

Spray Balls Custom Spray Balls SB gpm psi Ra Custom Spray Ball Nomenclature Selection Option Description Drill Pattern Ball Diameter Connection Size Connection Style Flow (gpm) - See item 3 above for limitations Pressure (psi) Finish (Ra) 0 No holes - Voids 3-A 1 180 Up - Vertical Mount 2 180 Up - Double Ball (each ball) 3 Special Spray Pattern (diagram req d)** 4 180 Down - Vertical Mount 5 360 Full Coverage 6 180 Up - Horizontal Mount 1.25 1.25" 1.5 1.50" 2.0 2.00" 2.5 2.50" 3.0 3.00" 4.0 4.00" 0.50" 0.50"* - 12 gpm (max. flow) 0.75" 0.75" - 25 gpm (max. flow) 1.00" 1.00" - 40 gpm (max. flow) 1.50" 1.50" - 100 gpm (max. flow) 2.00" 2.00" - 240 gpm (max. flow) 2.50" 2.50" - 400 gpm (max. flow) SC BW FL TC HC PN Slip Collar (standard) Butt Weld Flare (no connection) Tri-Clamp Half Coupling*** (FNPT) Pipe Nipple*** (MNPT) 40 40 gpm (standard) 0 0 gpm (no holes) Custom Enter gpm (maximum 400 gpm) 25 25 psi (standard) 0 0 psi (no holes) Custom Enter psi (maximum 70 psi) 32 32 Ra/150 Grit (standard) 25 25 Ra/180 Grit 15-20 15-20 Ra/240 Grit 9-11 9-11 Ra/320 Grit Spray Ball Drill Patterns SB-1 SB-2 SB-4 SB-5 SB-6 = 22 Model # Finish Option (EP) EP Electropolish (added to any finish) * Hair pin clip diameter does not conform to 3-A standard. ** Directionally drilled patterns require special pricing. *** Does not conform to 3-A standard. Material certification is available for an additional cost. Hastelloy and AL-6XN material options are available for some spray balls. 36 sanimatic.com

Spray Balls for Bio-Pharm Process Tanks Custom-Engineered Solutions Sani-Matic creates a 3-D model of your process vessels. This allows us to engineer the most effective static spray device and drill pattern to ensure proper coverage of all ports and surfaces. With decades of experience in spray technology and Bio-Pharm CIP applications, we understand the spray dynamics required to ensure proper flow rates, pressures and geometries. Spray Balls Precision Drilled Spray Balls and Custom Supply Tubes Once the spray pattern and design have been determined, Sani-Matic will manufacture the spray balls and supply tubes to deliver the cleaning solution. Custom patterns drilled with a CNC machine Orbital welding Product contact welds are ground and polished to meet interior finish requirements Orbital welds are boroscope inspected to meet ASME-BPE standards Custom engineered in 3-D Precision drilled Pass Riboflavin testing the first time Documented for future replacement Documentation Figure 1 Sani-Matic can provide complete documentation designed to meet your validation requirements for an additional cost. Material Certificates (MTRs and letters of compliance) Weld qualification, log and inspection reports Weld maps (see Figure 1) Mechanical polishing procedures Electropolishing procedures and certifications Surface finish certification General and subassembly as-built drawings Spray pattern layout with degrees and angles Weld procedures Custom Solutions We find custom solutions to individual processes by reviewing the cleaning needs and applying our state-of-the-art, 3-D modeling process. To order, please be ready to supply us with the following information: Tank drawings indicating agitators, dip tubes, anti-foams and spray ball connections Available CIP flow and pressure Surface finish requirements SC17.3 37

Supply Tubes Precise Spray Ball Placement for a Complete Clean Determining the proper supply tube for your spraying system is critical for thorough cleaning. Although spray balls are thought of as the only part to your spray solution, they will only provide a complete clean if they are positioned correctly for proper head and nozzle coverage. And, the right supply tube is an integral part of proper positioning. Sani-Matic is 3-A approved for its supply tube design, however, if your process requires a custom-designed supply tube, contact Sani-Matic to ensure it meets 3-A approval. 38

Single Ball Supply Tube vs. Double Ball Tee Attachment A properly sized single spray ball with the correct spray pattern provides the necessary cleaning coverage for many tanks. However, for tanks with baffles or agitators, a shadowing effect occurs within the tank. The diagrams below show how a double ball tee attachment overcomes this problem to provide complete cleaning coverage. Supply Tubes Shadowing This top view of a tank with baffles and agitator shows the shadowing of spray due to obstructions within the tank. Double Ball Placement For complete coverage, multiple spray sources are needed to compensate for the shadowing effect. Features/Special Notes 316L stainless steel Custom supply tubes require a longer lead time Material certification is available for an additional cost For Spray Ball options see pages 33-37 Custom supply tube configuration. SC17.3 39

Supply Tubes Supply Tubes Supply Tube Nomenclature ST Ra EP = Model # Selection Option Description Tube Diameter Tank Connection Internal Connection Connection Internal Length External Length Finish (Ra) 0.5 0.50" 0.75 0.75" 1.0 1.00" 1.5 1.50" 2.0 2.00" 2.5 2.50" 3.0 3.00" 0 none 1.5 1.50" End Cap Tri-Clamp 2.0 2.00" End Cap Tri-Clamp 2.5 2.50" End Cap Tri-Clamp 3.0 3.00" End Cap Tri-Clamp 4.0 4.00" End Cap Tri-Clamp 6.0 6.00" End Cap Tri-Clamp SC Slip Collar (standard) BW Butt Weld TC Tri-Clamp HC* Half Coupling (FNPT) PN* Pipe Nipple (MNPT) TC Tri-Clamp Ferrule (standard) BW Butt Weld SC Slip Collar HC* Half Coupling (FNPT) PN* Pipe Nipple (MNPT) (Enter length in inches) S If End Cap is used in, standard length of 1 11 / 16" is included (S) (Length in If no End Cap is used in, measure this inches) length (enter length) 32 32 Ra/150 Grit (standard) 25 25 Ra/180 Grit 15-20 15-20 Ra/240 Grit 9-11 9-11 Ra/320 Grit Finish Option (EP) EP Electropolish (added to any finish) * Does not conform to 3-A standard. NOTE: Material certification is available for an additional cost. 40 sanimatic.com

Double Ball Tee Double Ball Tee Nomenclature Selection Option Description Tube Diameter DT Ra EP Connection Ball Connection 0.75 0.75" 1.0 1.00" 1.5 1.50" 2.0 2.00" SC Slip Collar (standard) BW Butt Weld TC Tri-Clamp SC Slip Collar (standard) BW Butt Weld = Model # Tube Diameter Standard (selection ) Internal Length 0.75" 0.84" or 27 / 32" 1.0" 1.69" or 1 11 / 16" 1.5" 2.41" or 2 13 / 32" 2.0" 2.66" or 2 5 / 32" Supply Tubes Leg Length (Enter length in inches) Leg Length Finish (Ra) (Enter length in inches) 32 32 Ra/150 Grit (standard) 25 25 Ra/180 Grit 15-20 15-20 Ra/240 Grit 9-11 9-11 Ra/320 Grit Finish Option (EP) EP Electropolish (added to any finish) Note: Spray balls and spray ball clips are not included. See page 35 for options. Internal Length SC17.3 41

Tanker Spray Washers Model TS-4 Reliable Spray Options for Small, Medium and Large Tankers Sani-Matic provides two different models of drop-in style tanker spray washers for tanks transporting bulk food grade liquids. The TS-4 static spray washer and TS-5 impingement spray washer are capable of cleaning a variety of soils including dairy, juice and more. Model TS-5 The TS-4 is designed to thoroughly clean tankers up to 44 feet in length. It features a center-positioned, static spray ball with a top-to-bottom spray pattern. The top of the tanker is sprayed directly with the solution, which then cascades down the sides of the tank removing soil. It also includes two multi-bore jet nozzles to reach all product contact surfaces. The TS-5 is ideal for cleaning tanks up to 55 feet, as well as tanks that require high-impact cleaning for tough soils. Its S-shaped manifold positions the rotary spray device s nozzle for 360 spray coverage without obstruction, cleaning all product contact surfaces inside the tank. 42

Model TS-4 TS-4 features a center spray ball for top spray pattern and two multi-bore jet nozzles for tank end washing. The vented manway cover has a bail handle and two hold downs with gasket. Flow Requirements: 120 gpm @ 55 psi Connection Size: 2" Approximate Weight: 50 lbs. Model TS-5 The unique S-shaped manifold combines with the rotary spray device to create 360 spray coverage, allowing direct impingement of the cleaning solution to the entire tank. High pressure nozzles provide the reach needed to clean long tankers. Flow Requirements: 74 gpm @ 60 psi Connection Size: 2" Approximate Weight: 70 lbs. High (194 F) and low (140 F) temperature-rated spray nozzles are available Tanker Spray Washers TS-4 Spray pattern TS-5 Spray pattern SC17.3 43

Tanker Spray Washers Model TS-4 Drop-in style washer is ideal for 44' tankers. Connection Tri-Clamp - Complete Assembly 153190 Bevel Seat - Complete Assembly 1 4 1a 2a 3 10 9 S10090 12 3 /4" 48" Standard Length Replacement Parts List Item 1 Top only (bevel seat) 360004 1a Top only (tri-clamp) 138806 6 2a Bottom only TS-4 360075 2b Bottom only TS-5 (no spray) 138890 7 8 3 Arm/Spring Assembly (set of 2) S10093 Model TS-5* Drop-in style washer is ideal for 55' tankers. 4 5 Manway Gasket (neoprene) 320053 TS-5 Spray Nozzle* 1 038634 1 Connection Maximum Temperature Rating 5 TS-5 Spray Nozzle* 2 048812 2 Tri-Clamp Complete Assembly Bevel Seat Complete Assembly *Recommended operating pressure 40-100 psi. 140 F 138893 194 F 239965 140 F 144213 194 F 239966 6 7 8 TS-4 Nozzle 321793 Nozzle Gasket 020455 Nozzle Clamp 020473 3 10 9 Clip 320068 1 1a 4 1 2 3 /4" 10 Gauge 031564 *Recommended operating pressure 40-100 psi. 1 Spray Nozzle - Maximum temperature 140 F. 2 Spray Nozzle - Maximum temperature 194 F. 9 2b 48" Standard Length 5 44 sanimatic.com

Optional Equipment for Drop-In Handling 3 4 5 1 6 2 Tanker Spray Washers Item Description 1 Rail 4" I-beam, hanger, carbon steel primed 000522 2 Turns 90 / 48 radius bend, prime coated S18780 3 Carrier Rolling carrier, adjustable I-Beam fit 020231 4 Balancer Operate @ 55-70 lbs. 020766 5 Electric Hoist 1 / 6 HP, 300-lb capacity 021047 6 CIP Hose Tri-clamp discharge hose (2") 032757 Tapered Manway Assembly For use with rotating spray heads. Used in applications where impingement cleaning is required to remove heavily soiled products. 360115 22" W 15" D 16 1 / 8" W SC17.3 45

Accessories Accessories and Replacement Parts to Meet Diverse Cleaning Needs Whether manufactured in Madison, WI by our dedicated craftsmen or sourced from long-trusted suppliers, our lineup of accessories and replacement parts are available to help you meet your sanitation goals and make your work day easier. From CIP air eliminators, mushroom air vents, Flow-Verter Panels and chemical pumps to COP steam regulator valves, hose racks and COP baskets, we offer the accessories and replacement parts needed for a sanitary cleaning process. 4646

In-Tank Steam Mixer/Sparger The steam mixer/sparger mixes steam with water in the tank to reduce noise and maximize heating capacity. Steam mixers/spargers are attached to either in-tank piping or a coupling that is mounted through the tank sidewall. Description 316L stainless steel with a MNPT threaded connection type Connection Size Length 0.5" 9.75" 741162 0.75" 9.81" 740859 1.0" 7.00" 741137 1.25" 7.00" 640842 1.5" 9.00" 540042 Accessories NOTE: Sizing is determined by the steam valve through which steam is delivered. Steam Regulator Valve The steam regulator automatically controls the temperature of your cleaning unit without the use of external power. With a vapor pressure thermal system, the steam regulator senses temperature change and positions the valve plug to regulate the heating or cooling medium to maintain a desired temperature. Description Brass with a FNPT connection type Connection Size 0.5" 020494 0.75" 020495 1.0" 020506 NPT x NPT Fitting Thermowell Thermowell for Steam Regulator Thermal Bulb Description NPT x NPT Fitting Thermowell, 321 stainless steel tube, 10.5" long, 1.0 MNPT brass fitting 120002 Tri-Clamp x NPT Connection Thermowell 221907 Tri-Clamp x NPT Connection Thermowell SC17.3 47

Accessories Electric Immersion Heater Description Power Rating Manual thermostat, 3" 7.5 kw 023997 Tri-Clamp, NEMA 4x Head, 9.0 kw 029529 50-120 F, 460 VAC 12.0 kw 024296 NOTE: Additional voltages and sizes are available upon request. Tri-Clamp Connection Thermowell In-Tank Steam Kit All the components for adding steam capabilities to your COP. Size Kit Assembly 0.50 NPT Steam Sparger Adapters Thermowell Clamps & Gaskets 160813 Regulating Valve Gaskets & Clamps Regulating Valve 0.75 NPT Same as above 160814 1.0 NPT Same as above 160815 NOTE: Maximum pressure for mixer/sparger is determined by the incoming connection line. Adapter Steam Sparger Hose Racks Stainless steel hose racks provide a convenient way to store hoses at cleaning stations and COP tanks. They are available in two styles. Description Model # 5" x 12" backing plate 201A 740017 Mounting holes at each end 201B 740684 Level Probe The three-point level probe maintains the correct solution levels in a tank. Lumenite level controls are mounted in the control panel. Connection Size 2" Tri-Clamp connection for mounting on the top of tanks 220293 Note: All probes are cut to length. For replacement level probes, please measure the lengths of the existing model. 48 sanimatic.com

Orifice Plates These flow restrictors come with an 1 / 8" pilot hole, but can be drilled to your specifications. Fitting Size Material Pilot Hole Diameter.75" Tri-Clamp EPDM 1 / 8" 048700 1.0" Tri-Clamp EPDM 1 / 8" 048701 1.5" Tri-Clamp EPDM 1 / 8" 022074 2.0" Tri-Clamp EPDM 1 / 8" 048696 2.5" Tri-Clamp EPDM 1 / 8" 048697 3.0" Tri-Clamp EPDM 1 / 8" 048695 4.0" Tri-Clamp EPDM 1 / 8" 048702 Note: Available in Viton. Accessories Mushroom-Style Air Vent These vents are constructed of 316L stainless steel with a solid radiused and panned top. The underside portion is constructed with 1 / 8" perforated material. The vents may be installed on CIP tanks to prevent foreign materials from entering the tank. Fitting Size 1.5" Tri-Clamp 740828 2.0" Tri-Clamp 740829 2.5" Tri-Clamp 740830 3.0" Tri-Clamp 740831 4.0" Tri-Clamp 740832 6.0" Tri-Clamp 741502 Anti-Siphon The anti-siphon is constructed of 316L stainless steel and eliminates the siphoning of water from the tank back into the process water. Height (Face-to-Face Dimensions): 3 3 /4" Tank Connection Tube Adapter Flow Capacity 3.0" Tri-Clamp 1.5" Tri-Clamp 100 gpm 123416 3.0" Tri-Clamp 2.0" Tri-Clamp 240 gpm 129208 3 3 / 4" SC17.3 49

Accessories COP After-Market Options The following options are available to enhance your previously purchased COP system. Electric Motor Starter NEMA 4X, stainless steel enclosure UL-508. COP Model VAC RW-6 230 832091a RW-6 460 830192a RW-8 230 830992a RW-8 460 830195a COP Cover Counter-weighted sanitary cover assembly. Description COP Model 304 stainless steel RW-6 166376 RW-8 172152 Heavy-Duty Casters Add flexibility to your COP washer. Set of four (4) complete caster assemblies. Description 304 stainless steel 138593 Removable End-Drain Table Drain table to place parts for drying or re-assembly. Description 304 stainless steel 144416 Model 201B Please contact your Sani-Matic Sales Engineer about installation recommendations and options. 50 sanimatic.com

Standard COP Baskets All Standard COP Baskets are available for immediate delivery. Sani-Matic COP Baskets allow for thorough cleaning, while reducing the number of damaged and lost parts. Baskets make it easy and safe for workers to handle valuable components. Basket Description Dimensions (Basket only) Handle Height URWB-1 Small Parts Basket, 316L Stainless Steel, EP Finish 19" x 15" x 3.5" 17 1 / 2" 460030 URWB-2 Fittings Basket, 316L Stainless Steel, EP Finish 19.75" x 15" x 4" 15" 020132 Accessories URWB-5 Hanger style handle to hang on COP tanks edge and locking cover to isolate components, 316L Stainless Steel, EP Finish 12" x 6" x 10" 17 5 / 8" 020139 URWB-6 Valve Basket, 316L Stainless Steel, EP Finish 22" x 10.5" x 10" 23" 020136 URWB-7 Extra Large Parts Basket, 316L Stainless Steel, Bead Blasted Finish Note: Fits Sani-Matic COP tanks 24" W x 22" D or larger 22" x 22" x 18" 28" 440021 URWB-1 URWB-2 URWB-5 URWB-6 URWB-7 SC17.3 51

Accessories Sanitary Air Eliminator The air eliminator is constructed of 316L stainless steel and installed at the suction of a CIP return pump to remove air from CIP return solution and prevent air lock in a centrifugal pump. Tip: If the pump is used during processing to transfer product, the air eliminator is usually removed and the port is capped. Connection Size 1.5" 740636 2.0" 740637 2.5" 740638 3.0" 740639 4.0" 740640 1.25" Plastic Ball Replacement Parts 1" Gasket 020388 Plastic Ball (1.25") 020280 Sanitary Air Eliminator 1" Gasket CIP Return Pump Air Vent The return pump air vent is installed to expel air. This avoids cavitation and air lock that can cause wash program disruption. Ball valve shut-off available, please call for pricing. Description 304 stainless steel, 1 / 4" I.P. thread 720001 Flow-Verter Panels Reduce piping and valve costs by creating multi-port flow selector stations with a Sani-Matic Flow-Verter Panel. Description Custom Three styles: round, rectangular and square Designed for your process* *Call Sani-Matic to discuss your Flow-Verter Panel requirements. 52 sanimatic.com

Chemical Pumps Sani-Matic provides high-quality Wilden pumps on our chemical pump assemblies. The Air-Operated Double-Diaphragm (AODD) pumps ensure reliability and easy installation. Pump Features/Benefits Self-priming Variable speed Dry-run without damage Longest Mean Time Between Repair (MTBR) Anti-freezing Robust design - Polypropylene - wetted parts, outer piston, center section and air valve - PTFE - valve ball, diaphragm O-Ring (neoprene back-up) and valve seat O-Ring (encap. Viton ) Diaphragm Pump, 1 /4" connection size Diaphragm Pump, 1 /2" connection size Accessories Chemical Pump Performance Curves Curve for Pump with 1 / 4" Connection Size ( 900028) Pump Only Description Diaphragm pump, 1 / 4" Connection Size, Polypropylene Diaphragm pump, 1 / 2" Connection Size, Polypropylene Connection Size Max gpm 1 / 4" 4.8 900028 1 / 2" 15.0 900510 Pump Assemblies Assemblies include mounting bracket, check valve and complete piping kit. Max gpm Voltage 4.8 24 109640 4.8 120 760504 15.0 24 109211 15.0 120 760455 Curve for Pump with 1 / 2" Connection Size ( 900510) SC17.3 53

Technical Data Finding the Right Solution for Your Process Ordering sanitary components for an application requires a great deal of information to ensure the right strainer or spraying system is selected. We have a group of inside sales specialists and engineers available to help find the right solution for your process, but for quick and easy reference, we ve included an abbreviated technical data sheet. 54

Conversion Factors Pressure Feet of Water x 0.433 = psi Inches Hg. x 0.491 = psi Atmosphere x 14.7 = psi Meters of Water x 1.42 = psi Kilograms per Centimeter 3 x 14.22 = psi Atmosphere x 33.9 = Feet of Water psi x 2.31 = Feet of Water Inches Hg. x 1.13 = Feet of Water Technical Data Flow Volume Viscosity Lbs. of Water per Hour x 0.002 = gpm Lbs. of Fluid per Hour/Specific Gravity x 0.002 = gpm Meter 3 per hour x 4.4 = gpm Liters per minute x 0.264 = gpm gpm x 3.785 = Liters per minute Liter x 0.264 = Gallon Feet 3 x 7.48 = Gallon Lbs. of Water x 0.119 = Gallon Imperial Gallon (British) x 1.2 = Gallon (U.S.) U.S. Gallon x 3.785 = Liter Centipoise/Specific Gravity = Centistokes Centistokes x 4.64 = SSU (approx.) Viscosity and Specific Gravity Table for Various Foods Product Condition Specific Gravity Viscosity Butter 0.93 to 0.98 15,000 SSU @ 55 F 440 SSU @ 90 F 220 SSU @ 115 F Catsup Varies 1.13 2,300 to 6,100 SSU @ 190 F 60 F - 30% Fat 1.00 73 SSU Cream 60 F - 40% Fat 0.99 140 SSU 60 F - 45% Fat 0.99 215 SSU Egg Yolk 1.12 21,500 SSU @ 35 F Honey 81.2 Brix (standard) 1.30 1,250 to 1,425 SSU @ 100 F Maple Syrup 1.37 2,000 SSU @ 68 F Margarine 0.93 (approx.) 13,900 SSU @ 84 F Peanut Butter 1.20 31 SSU @ 68 F Water 1.00 77,400 SSU @ 85 F Whey (condensed) 60% Total Solids 1.24 9,300 SSU @ 45 F 50% Total Solids 1.20 2,300 SSU @ 131 F 50% Total Solids 1.20 3,100 SSU @ 65 F 27% Total Solids 1.11 75 SSU @ 100 F Note: Viscosities may vary depending on products, formulas and the process used. SC17.3 55

Capabilities Overview Food & Beverage Systems The most well-known and respected food and beverage processors put product safety at the top of their priority list. That s why they turn to Sani-Matic for sanitary process cleaning solutions. From Clean-Out-of-Place (COP) parts washers, cabinet washers, tunnel washers and boosted pressure systems to multi-tank and multi-circuit Clean-In-Place (CIP) systems, Sani-Matic delivers a complete clean, every time. The Sani-Matic team is experienced in developing systems, equipment and procedures that meet industry standards for safety and provide customers with ongoing Cleaning Confidence. Bio-Pharm Systems Sani-Matic bio-pharm cleaning equipment for the pharmaceutical and biotech industries meet cgmp and ASME-BPE standards, as well as individual safety and manufacturing standards for a repeatable and validatable clean. The Sani-Matic bio-pharm offering includes portable and stationary Clean-In-Place (CIP) systems to clean tanks, process lines, bioreactors and fermenters, as well as Clean-Out-of-Place (COP) systems. The COP systems include Immersion Parts Washers for cleaning hoses, fittings, gaskets and clamps and cabinet washers for cleaning pharmaceutical glassware or entire suites of process items. Whether a bio-pharm manufacturer needs to clean processing equipment in place or disassembled parts out of place, they turn to Sani-Matic to design systems that address their toughest critical cleaning challenges.

Sanitary Components High-quality, off-the-shelf and custom-designed components are part of Sani-Matic s extensive sanitary process cleaning equipment and component offering. From CIP air vents and air eliminators to COP baskets, In-Line Strainers and custom-designed spray balls, Sani-Matic has components for your sanitary process cleaning needs. The company s experienced team of design and engineering experts ensures your components are properly specified to meet your exact process. And, components are manufactured by Sani-Matic s Madison, Wisconsin-based craftsmen for quick order turnaround. Select components are designed to conform to 3-A standards to accommodate process requirements. Services Sani-Matic has a large team of field service engineers to provide preventative maintenance, system start-up and after-market service. And, through the Tactical Solutions program, Sani-Matic offers system analyses and consultation to help optimize your current cleaning process. The motivated service team has decades of experience identifying, troubleshooting and solving the difficult cleaning challenges you face every day. Whether you d like routine maintenance to ensure ongoing high-quality system performance, or you d like an expert to assess your current system to identify cost-saving adjustments, Sani-Matic has the resources to offer Cleaning Confidence before, during and after your cleaning system purchase. 57

Di st r i but edby: Gr eens bor odi v i s i on 301Ci t at i oncour t Gr eens bor o,nc27409 3363930100 Loui s v i l l edi v i s i on 4400Bi s hoplane,sui t e1 12 Loui s v i l l e,ky40218 5024597475 www. mgnewel l. com sal es@mgnewel l. com Nas hv i l l edi v i s i on 334Fr eehi l l Road,Sui t eb Hender s onv i l l e,tn37075 6158223030