CATALOGUE 2018
Product Catalogue FREIGHT POLICY Effective 1st February 2016, all orders that total less than $300 (excluding GST) will attract a freight charge of $10.00 + GST. All orders in excess of $300 (excluding GST) will be delivered free into store. Please contact us for your discount structure off this list price. TERMS AND CONDITIONS No party should rely upon the contents of this publication as to the fitness of any particular product for any particular use or application. Goods are offered with the benefit of the manufacturers warranty but Reliance Worldwide Corporation (Aust.) Pty. Ltd. shall not be liable for any loss or damage either direct or consequential arising out of any defects. Subject to any statutory obligation, Reliance Worldwide Corporation (Aust.) Pty. Ltd. may at its election: 1. Replace any product found by Reliance Worldwide Corporation (Aust.) Pty. Ltd. to be defective within twelve months of sale or supply equivalent product; 2. Pay the cost of replacing any such defective product; or 3. Repair any such defective product or pay the cost of repairs. All goods are sold on Reliance Worldwide Corporation (Aust.) Pty. Ltd. General Conditions of Sale as attached and as may be modified from time to time prior to any particular sale. Reliance Worldwide Corporation (Aust.) Pty. Ltd. reserves the right to change pricing, modify designs and specifications and to withdraw and introduce products. 2018 All rights reserved. No part of this publication may be reproduced, copied or transmitted in any form by any means graphic, electronic or mechanical (including photo-copying, recording, taping or by any information storage and retrieval system) without prior permission in writing of the publisher Reliance Worldwide Corporation (Aust.) Pty. Ltd. CONTACT INFORMATION Head office and Manufacturing Centre Details Address 27-28 Chapman Place, Eagle Farm 4009 Phone 1800 777 299 Fax 1800 065 321 Web Email www.matthewsfirealarm.com.au sales@mattfire.com.au Matthews Fire Alarms is a division of Reliance Worldwide Corporation (Aust) Pty. Ltd. ABN 71 004 784 301 If you are requiring an item that you do not see listed in this booklet, please contact our customer service team on 1800 777 299. Page 3
Index Adaptors Product Coventry Adaptors 6 Reducing Adaptors 6 Copper To Roll Groove Adaptors 6 Storz Swivel Adaptors 6 Male To Male Adaptor 6 125mm Storz Roll Groove Adaptor 7 Ship To Shore Flange 7 Backflow Product Double Check Valve 8 Reduced Pressure Zone Valve 8 Boosters Product Back Entry Booster 9 Bottom Entry Booster 9 Single Point Booster 9 Storz Single Point Booster 9 Branchpipes Product 38mm Bsp Thread - 25mm Top Branchpipe 10 65mm QRT PVC Branchpipe 10 65mm QRT Brass Branchpipe 10 65mm BIC - 40mm BSP Top Branchpipe 10 Breechings Product Controlled Independent Ball Valve 11 Controlled Dividing QRT Breeching 11 Controlled Dividing Breeching 11 Page Page Page Page Page Couplings Product 65mm QRT Serrated Tail Coupling 12 BSP Coupling 12 40mm BIC Coupling 12 65mm BIC Coupling 12 Page Page 4
Index Hydrant Valves Product NSW x 80 Roll Groove Hydrant Valve 13 CFA x 80 Roll Groove Hydrant Valve 13 BIC x 80 Roll Groove Hydrant Valve 13 65 Storz x 80mm Roll Groove 30 Hydrant Valve 13 QRT x 80 Roll Groove Hydrant Valve 13 BIC x 65mm BSP Male Hydrant Valve 14 SART x 80 Roll Groove With Anti-Vandal Key 14 40mm BSP Hydrant Valve 14 65mm SART Hydrant Valve 14 65mm Globe Hydrant Valve 14 Page Nozzles Product 40mm BSP Jet Nozzle 15 Junior Fog Nozzle 15 40mm Commercial Fog Nozzle 15 FYRKYL Multijet And Spray Nozzle 15 Plastic Diffuser Nozzle 15 Jet Nozzle 16 Jet Spray Nozzle 16 Standpipes Product Double BIC Standpipe 17 Single Standpipe 17 Contractors Standpipe 17 Spare Part List (Standpipe) 17 BS750 Standpipes 17 65mm QRT D/O Standpipe 18 Tools Product Hydrant Valve & Chisel Point Spanner 19 Storz Folding Spanner 19 Fire Beater 19 Rakehoe 19 Firemans Hatchet 19 Pickhead Axe 20 Hose Washer 20 Storz Static Pressure Gauge 20 Hydrant Road Key 20 Storz Spanner 20 Misc Product Pipe Mounted Hose Cradle & Cover 21 Swinging Arm Cradle 21 Jumper Valve Washers 21 Adaptor Washers 21 Miscellaneous Washers 21 Pitot Gauge (Peizometer) 22 Page Page Page Page Page 5
Adaptors Conventry Adaptor 3 TPI BSP or Roll Groove Body: Aluminium or Gunmetal Washer: Rubber Reducing Adaptor 65 M/F Threads: QRT, CFA, NSW, SA Pipe Thread Male 50mm, 40mm, 25mm, 20mm Body: Aluminium or Gunmetal or Polished Copper to Roll Groove Adaptors Sizes Material 50mm, 80mm, 100mm, 150mm, and 200mm DR Brass Storz Swivel Adaptors Body: Aluminium or Rubber Other sizes available on request Male to Male Adaptor All Threads availaible for all states ie, BIC QRT, NSW SART, CFA BSP Available in 40mm, 50mm, 65mm Gunmetal or Aluminium Page 6
Adaptors 125mm Storz Roll Groove Adaptor 125 Storz 100 mm Roll Grooved Aluminium Different sizes available upon request Ship to Shore Flange Ship to Shore Flange BIC, QRT, NSW, SART, and 65 BSP, Storz Gunmetal Page 7
Backflow Double Check Valve Size Available in 15mm up to 200mm ` Reduced Pressure Zone Valve Available in 15mm up to 200mm Brass Page 8
Boosters Back Entry Booster Standard 65mm Fire Service Connection 100mm Roll Groove and 100mm BSP Male Painted Approved to AS2419.3 Bottom Entry Booster Standard 65mm Fire Service Connection 100mm Roll Groove Painted Approved to AS2419.3 Single Point Booster 65mm Fire Service Connection 80mm Roll Groove Available with 65mm BSP Storz Single Point Booster Size 65mm Storz 80mm Roll Groove Body: Gunmetal Page 9
Branchpipes 38mm BSP Thread - 25mm Top Branchpipe 40mm BSP Thread 25mm BSP Thread Body: Brass 65mm BIC PVC Branchpipe BIC Plastic Fixed Nozzle 65mm QRT PVC Branchpipe QRT, SA AND NSW Plastic QRT Branchpipe comes with removable nozzle 65mm QRT Brass Branchpipe QRT, SA, NSW, and CFA Body: Gunmetal and Aluminium 40mm BSP CFA only available in Gunmetal 65mm BIC - 40mm BSP Top Branchpipe BI 40mm BSP Thread Body: Gunmetal and Aluminium Page 10
Breechings Controlled Independent Ball Valve Other 65mm Storz 2 x 65mm Storz Body Aluminium Also available in QRT & BIC Other Storz variations also available Controlled Dividing QRT Breeching Other QRT, NSW, and SA 2 x 65mm QRT, NSW, and SA Body: Gunmetal Painted Single Control - Enabling the user to close off 1 outlet Controlled Dividing Breeching Other BIC Male 2 x 65mm BIC Female Body: Brass Painted Single Control - Enabling the user to close off 1 outlet Page 11
Couplings 65mm QRT Serrated Tail Coupling QRT, NSW, BIC, SA Hose Tail, Serrated or Grooved Body: Brass or Aluminium Machined / Cast Also available with 40mm, 50mm, or 65mm Hose Tails BSP Coupling 40mm BSP 40mm Hose Tail Grooved Body: Brass Machined / Cast 40mm BIC Coupling 40mm British Instantaneous 40mm Hose Tail, Grooved Body: Gunmetal Machined / Cast 65mm BIC Coupling Standards 65mm British Instantaneous 40mm, 50mm, and 65mm Hose Tail, Grooved or Serrated Body: Gunmetal or Aluminium BS336 Page 12
Hydrant Valves NSW x 80 Roll Groove Hydrant Valve Standards 65mm BSP Male or 80mm Roll Groove - 65 BSP Female NSW Handwheel: Cast Iron, Painted Painted AS2419.2 AS2419.2 CFA x 80 Roll Groove Hydrant Valve Standards 65mm BSP Male or 80mm Roll Groove - 65 BSP Female NSW Handwheel: Cast Iron, Painted Painted AS2419.2 AS2419.2 BIC x 80 Roll Groove Hydrant Valve - Multi Position Bi Standard 80mm Roll Groove - 65 BSP Female Instantaneous Handwheel: Cast Iron, Painted Painted AS2419.2 The instantaneous outlet can be adjusted, so that the release can be swivelled and locked in any position. 65 Storz x 80mm Roll Groove 30 Hydrant Valve Standard 80mm Roll Groove - 65 BSP Female 65mm Storz Handwheel: Cast Iron, Painted AS2419.2 Storz Adaptor Aluminium QRT x 80 Roll Groove Hydrant Valve Standard 80mm Roll Groove - 65 BSP Female BIC Handwheel: Cast Iron, Painted Painted AS2419.2 Page 13
Hydrant Valves BIC x 65mm BSP Male Hydrant Valve 65mm BSP Male BIC Handwheel: Cast Iron, Painted Painted AS2419.2 SART x 80 Roll Groove with Anti-Vandal Key Standards 80mm Roll Groove - 65 BSP Female SART AS2419.2 Anti-Vandal key is fitted to stop unauthorised use of the valve. 40mm BSP Hydrant Valve 40mm BSP 40mm BSP Body: DR BRass Handwheel: Cast Iron, Painted Painted 65mm SART Hydrant Valve Standards 80mm Roll Groove - 65 BSP Female 65mm SART Handwheel: Cast Iron, Painted AS2419.2 65mm Globe Hydrant Valve Standards 65mm BSP Male 65mm QRT or 65mm NSW VT Handwheel: Gunmetal AS2419.2 Page 14
Nozzles 40mm BSP Jet Nozzle 40mm BSP 12mm, 15mm, 16mm, 20mm and 25mm Gunmetal Also Available in Aluminium Junior Fog Nozzle 20mm or 25mm BSP Gunmetal 40mm Commercial Fog Nozzle 40mm BSP Gunmetal FYRKYL - Multijet and Spray Nozzle 25mm BSP Female (Storz available) Body: Cast iron and Aluminium Turret: Nylon Powder Coated Red Plastic Diffuser Nozzle 20mm, 25mm, and 40mm BSP Female Body: Plastic SPECIFICATIONS Size 20mm PVC Nozzle 38mm PVC Nozzle Flow Rate 690kPa 690kPa 690kpa Solid Stream 76.1pm 148.1pm 76.1pm 45 Spray 95.1pm 307.1pm 95.1pm 120 Spray 117.1pm 352.1pm 11.1pm 25mm PVC Nozzle Page 15
Nozzles Jet Nozzle 20mm, 25mm 20mm : 6mm Orifice 25mm : 6mm Orifice 12mm Orifice 20mm & 25mm Available in Gunmetal Only Jet Spray Nozzle 20mm and 25mm Hose Tail Gunmetal Twist the nozzle to change between jet, spray, and off. Page 16
Standpipes Double BIC Standpipe Spring or Screw Hydrant All Types Of s Available (BIC pictured) Powder Coated Red - Other Colours As Specified Single Standpipe Spring or Screw Hydrant All Types Of s Available (QRT Thread Pictured) Gunmetal and Aluminium Powder Coated Red - Other Colours As Specified Contractors Standpipe Spring or Screw Hydrant All types of outlets available in 25mm or 40mm (25mm contractors pictured) Gunmetal Powder Coated Red - Other Colours As Specified Can Have Tap Fitted Spare Part List (Standpipe) Please download Spare Parts List at: www.matthewsfirealarm.com.au BS 750 Standpipes BS 750 xa BIC Standpipe BS 750 x Contractors Standpipe BS750 (65mm SART Thread) 65mm BIC Female and 65mm NSW VT Male Gunmetal and Aluminium Polished Contractors Standpipe Available in Gunmetal Page 17
Standpipes 65mm QRT D/O Standpipe Spring or Screw Hydrant All Types of s Available (QRT Pictured) Gunmetal and Aluminium Powder Coated Red - Other Colours as Specified Page 18
Tools Hydrant Valve & Chisel Point Spanner Steel Hot Dipped Galvanised Storz Folding Spanner Aluminium Heat Treated Fire Beater Handle 25mm Wooden Dowel Unlined Fire Hose RakHoe The Rakho 6 prong comes complete with an Australian hardwood timber handle. A McLeod fire fighting tool, the Rakho is favoured by fire fighters for clearing heavy duty undergrowth. The Blade is made from special hardened steel and has a serrated edge for raking and a sharp blade for cutting, scraping and chipping. Our Rakho has a powder coated enamel finish in bright orange. A Rakho Handle will also be required, made of a strong Australian timber hardwood, this item is durable and ideal in tough working conditions. Its standard length is 1300mm. Our Rakho Head comes complete with a handle for clearing undergrowth etc. Firemans Hatchet Standard Tested to 20,000 volts Leather pouch available at extra cost Page 19
Tools Pickhead Axe Weight Length Fibreglass Handle 2.4kg 900mm Hose Washer Length Width Height Weight Can Be Supplied With Any Fitting 300mm 300mm 270mm 10kg Designed for the removal of loose stones, sand etc. Features a large diameter bore of 134mm hose with couplings up to 75mm storz and normal 65mm threaded to pass through. Storz Static Pressure Gauge All Types Of s Available (Storz Pictured) Available In All Threads For All States Hydrant Road Key Material Steel Storz Spanner Steel Powder Coated Black Page 20
Miscellaneous Pipe Mounted Hose Cradel & Cover Hot Dipped Galvanised Steel Cover: Powder Coated Unit is designed to be supported by a 75mm pipe. Holds a 30m hose layered into cradle. Swinging Arm Cradle Steel Powder Coated Back arm swings enabling the cradle to be fitted into the cabinets. Adaptor Washers Material Neoprene or Leather For all washer dimensions please refer to: www.matthewsfirealarm.com.au Jumper Valve Washers Material Neoprene For all washer dimensions please refer to: www.matthewsfirealarm.com.au Miscellaneous Washers Material Neoprene or Rubber 65mm BIC Page 21
Miscellaneous Pitot Gauge (Peizometer) Chrome Plated Comes complete with case and liquid gauge. A flow rate chart is also included with gauge. Page 22
Catalogue - 2017 27-28 Chapman Place, Eagle Farm QLD 4009, Australia (07) 3630 1200 1800 062 669 www.matthewsfirealarm.com.au Matthews Fire Alarm is a division of Reliance Worldwide Corporation (Aust) Pty. Ltd. ABN 71 004 784 301