CATALOGUE. Solutions for Power, Control & Safety

CATALOGUE Solutions for Power, Control & Safety 2015

Contents An independent manufacturer... p.4 Four key applications: the benefit of a specialist... p. 5 A cutting-edge laboratory... p. 6 Socomec in India... p. 7 s list...p. 34 National products p. 9 Load break switches Switch disconnectors for machine control and power distribution LBS p. 10 Changeover and Bypass switches Manual and motorised changeover switches Manual COS p. 16 Fuse COS p. 22 International products CATALOGUE Solutions for Power Control & Safety of photovoltaic applications 2014 Solutions for Power Control & Safety of photovoltaic applications 2 Catalogue 2015

Welcome to your new SOCOMEC India product catalogue. To make it even easier, we have grouped all of our products into two major families. Our flagship products are listed below. To find out all about our comprehensive ranges, let our helping hands be your guide. Happy reading. Bypass COS p. 26 Motorised COS p. 30 CATALOGUE Changeover Switching solutions Transfer Switching Equipment from 40 to 6300 A CATALOGUE A complete range for metering, monitoring & power quality 2015 2015 Solutions for Transfer switch equipments Complete range for metering, monitoring & power quality Catalogue 2015 3

An independent manufacturer The benefit of a specialist 3,0 m 2 of test platforms One of the leading independent power testing labs in Europe innovative!,000 on-site interventions per year Nearly 400 experts in commissioning, technical audit, consultancy and maintenance Since its foundation more than 90 years ago, SOCOMEC continues to design and manufacture its core products in Europe. Notably solutions for its primary mission: the availability, control and safety of low voltage electrical networks. As an independent manufacturer, the Group is committed to constant innovation to improve the energy performance of electrical installations in infrastructures as well as industrial and commercial sites. 10 % of turnover invested in R&D Always at the cutting-edge of technology for innovative, high-quality products Throughout its history, SOCOMEC has constantly anticipated market changes by developing cutting-edge technologies, providing solutions that are adapted to customer requirements and fully in keeping with international standards. Optimising the performance of your system throughout its life cycle - this is the commitment carried out every day by the SOCOMEC teams around the world, wherever your business is located. SDIV 181 A MADE IN EUROPE 4 Catalogue 2015

Four key applications: the know-how of a specialist Critical Power Ensuring the availability of high-quality power for critical applications. Thanks to the company s wide range of continuously evolving products, solutions and services, SOCOMEC are experts in the three essential technologies that can ensure the high availability of supply to critical facilities and buildings i.e.: uninterruptible power supplies (UPS) that provide high-quality power and reduce distortion and interruptions to the mains supply due to their power storage backup, changeover of high availability sources to transfer supply to an operational backup source, continuous monitoring of installation facilities to prevent failures and reduce operating losses. Datadock Power Control & Safety Managing power and protecting individuals and property. SOCOMEC s expertise in this domain is unquestionable; the company is an undisputed leader in power switching and changeover functions, and has been a specialist manufacturer of electrical equipment since 1922. The company has long defended the benefits of fuse protection for individuals and property, and has become a major player in cutting-edge technology such as the monitoring and detection of insulation defects. SOCOMEC guarantees solutions and services which are both relevant and efficient. APPLI 575A Solar Power Guaranteeing the safety and durability of photovoltaic (PV) facilities. As experts in the solar energy equipment field, SOCOMEC has all the specialist know-how for implementing key strategic functions in on-grid and off-grid PV facilities, including: safety, through specially designed switch disconnectors to cut the DC current generated by solar panels regardless of the facility configuration and operating conditions, the reliability of DC facilities thanks to solutions preventing the degradation of insulation and electric arc failure in DC current, control of very high-efficiency energy conversion, via PV inverters, to transform all energy generated by the solar panels into power to be consumed locally or re-injected into the national grid, PV production and energy storage solutions for on-grid and off-grid applications. CORPO 413 A Energy Efficiency Improving building and facility energy efficiency. SOCOMEC solutions, ranging from sensors to the wide choice of innovative, modular software packages, are driven by experts in energy efficiency. They meet the essential requirements of managers or operators of tertiary, industrial or local authority buildings, and make it possible to: measure power consumption, identify sources of excess consumption, and raise occupant awareness, limit reactive energy and prevent associated tariff penalties, use the best tariffs, check supplier invoicing and accurately distribute energy bills amongst consumer entities. APPLI 571A Catalogue 2015 5

A cutting-edge laboratory The backing of an expert Since 1965, the Pierre Siat test laboratory has used its expertise to guarantee the reliability and conformity of SOCOMEC products and solutions. Our customers are also welcome CORPO 342 A A decisive link Located at the Company s headquarters in Benfeld (France), the Pierre Siat test laboratory is one of SOCOMEC s main quality pillars: its contribution to the development, qualification and certification phases plays a decisive role in the process leading to the creation of a product or solution. Global scale This totally independent laboratory is recognised by the major certification bodies worldwide: a member of the ASEFA (1) and the LOVAG (2), it is accredited by COFRAC (3), UL (CTDP (4) ), CSA (shared certification) and KEMA (SMT/ WMT (5) ). It also works in partnership with numerous international certification organisations (6). The quality and safety requirements specific to each country are therefore fully taken into account. Specialist facilities With its 100 MVA (Idc 100 ka rms 1 s) short-circuit platform, three 10 ka overload platforms and numerous other test instruments in facilities covering 10 m 2, the Pierre Siat laboratory is currently the 2 nd French power laboratory. It combines expertise in electricity and mechanics, pneumatics and computing. Ongoing commitment To adapt to the increasingly demanding standards and ever more innovative and high-performance products, the Pierre Siat laboratory is permanently extending the scope of its tests, investing whenever necessary in new equipment. A vast range of tests The laboratory submits all SOCOMEC products and solutions (including those in enclosures) to numerous tests in the following fields: functional: component resistance and operating tests, dielectric: immunity to interference, dielectric insulation, overvoltage, overcurrent, mechanical: endurance and mechanical shocks, etc., environment: functional or electrical tests under extreme conditions (temperatures, salt spray, etc.), vibrations, AC / DC endurance: in operation and under controlled temperatures (arcs, LV / HV power cuts, etc.), temperature rise, electromagnetic compatibility (EMC), metrology, safety: flammability, etc. Conducted during the design and production phases, these tests guarantee the long-term reliability of the equipment sold. Customized services These test facilities and expertise are also available to our partners who require assistance with the qualification and certification of their products or equipment. We issue certificates of conformity and performance declarations upon request. For more information, visit our web site: www.socomec.com/testing-laboratory_en.html (1) Association des Stations d Essais Françaises d Appareils électriques basse tensio (French association of low voltage electrical equipment test stations) (2) Low Voltage Agreement Group (3) Comité Français d Accréditation (French accreditation body) (4) Client test data programme (5) Supervised Manufacturer s testing / Witnessed manufacturer s testing (6) KEMA, CEBEC, UL, CSA, ASTA, Lloyd s Register of Shipping, Bureau Véritas, BBJ-SEP, EZU, GOST-R, etc. 6 Catalogue 2015

Socomec in India state of the art facility to meet local demands Founded in 1990, SOCOMEC India is a wholly owned subsidiary of Socomec France. An ISO certified company presence across 12 locations, having a skilled and dedicated workforce over 325 people. CORPO 425 A A flexible manufacturing structure Socomec India a state of the art manufacturing facility spread in 2100 square meter for the production of load break switches and manual changeover switches ranging from 63 A to 31 A. It also manufactures Uninterruptible Power Supply (UPS). The plant equipped with advanced manufacturing technology has embraced lean manufacturing principles by implementing a system of continuous improvements. Our objective is to provide high levels of product quality to meet our valuable customer demands at affordable cost. Solutions to meet every need Thanks to our substantial R&D resources, our product range is continuously evolving based on our contact with clients. Our solutions have been approved by the most demanding users. It caters to the application such as Critical Building, Building, Industrial, OEM, Infrastructure & Renewable energy, etc. The expert touch Certified quality products, continuous dialogue to understand customer requirements, maximum flexibility and dedication right by your side. Our experience at your service. Our specialists at your disposal Trusting us with your project means you benefit from pre- and after-sales technical support. Socomec has well qualified and trained sales, service and project management team deployed across the country. Since the team is involved in sales and after sales support, the customer requirements are well understood and suitable solutions are provided. Our qualified and dedicated maintenance engineers and technicians in India assure the peace of mind of our customers. REGAR 103 B Catalogue 2015 7

National products Load break switches LBS 63 to 31 A p. 15 Changeover and bypass switches Manual changeover switches Enclosed solution All our products are as well available enclosed for direct usage in your installation. More information in the following pages. Enclosed LBS 63 to 1600 A p. 15 Manual COS Fuse COS 63 to 31 A 125 to 630 A p. 16 p. 22 Enclosed COS 63 to 31 A p. 21 Manual bypass switches Bypass COS 125 to 1600 A p. 26 Motorised changeover switches Enclosed Fuse COS 125 to 630 A p. 25 Enclosed Bypass COS 125 to 630 A p. 29 Motorised COS 125 to 1600 A p. 30 Catalogue 2015 9

LBS Load Break Switch from 63 to 31A Load Break Switch lbs_037_a The solution for > Main switchboard > Distribution panel > Emergency switching > Bus tie Function The SOCOMEC LBS ensures making and breaking on load and security breaking of any low voltage electrical circuit. They are available in 4 poles manual operation. Operations Direct The pad lockable handle is mounted directly on the LBS and lockable in OFF position. External The pad lockable handle is to be mounted on the panel door and lockable in OFF position. The external front operation ensures that the door is interlocked in ON position. General Characteristics Very compact design Resistant to Tropical conditions and Polluted environment Quick Make & Quick Break Fully visualized breaking High thermal and Dynamic withstand capacity Available in open execution and Sheet Steel Enclosure, for top or bottom cable entry. High performance: AC23 Category Any pole suitable for Neutral Unique Safety Handle with built in door Padlock facility High Electrical and Mechanical Endurance. Strong points > Suitable for aluminium and copper connection > High reliability and performance Conformity to standards > IS/IEC 60947-3 Approvals and certifications > CPRI Functional diagram Terminal shrouds Extension rod Locking with key lock (RONIS) Door locking U Terminal screens 1st A.C 2nd A.C Lockable handle (3 padlocks) sirco-hpl_003_a_1_gb_cat 1st aux. contact 2nd aux. contact Direct handle operation Exterior handle operation Set of 3 aux. contacts Set of 4 aux. contacts 10 Catalogue 2015

LBS Load Break Switch from 63 to 31A Characteristics 63 to 630 A LBS from 63 to 630 A s GL00634POI GL01254POI GL02004POI GL024POI GL03204POI GL04004POI GL0 6304POI Thermal current I th (40 C) 63 A 125 A 200 A 2 A 320 A 400 A 630 A Max. Normal rating of fuses 63 125 200 2 315 400 630 Insulation voltage U i (V) 7 1000 1000 1000 1000 1000 1000 Dielectric strength (V) Hz 1 mn. 4000 00 00 00 00 8000 8000 Impulse voltage (kv) 6 6 6 8 8 12 12 Rated operational current I e (A) 415 VAC-AC 23 A 63 125 200 2 320 400 630 0 VAC-AC 23 A 55 100 160 200 2 315 315 260 VDC-DC 21 A 63 125 200 2 320 400 630 260 VDC-DC 22 A 63 125 200 2 320 400 0 260 VDC-DC 23 A 63 125 160 200 2 400 0 440 VDC-DC 21 A 63 125 200 2 320 400 0 440 VDC-DC 22 A 63 125 160 200 2 400 0 440 VDC-DC 23 A 63 125 160 200 2 400 0 Motor power (kw) 415V 415 VAC without pre-break Aux. contact 30 63 80 132 160 200 220 0 VAC without pre-break Aux. contact 30 63 63 140 220 220 220 690 VAC without pre-break Aux. contact 22 55 55 90 1 1 1 415 VAC with pre-break Aux. contact 30 63 80 132 160 220 355 0 VAC with pre-break Aux. contact 30 80 80 160 220 280 355 690 VAC with pre-break Aux. contact 35 110 110 110 220 220 295 Motor Reactive 415 VAC (kvar) 25 55 60 100 125 1 2 x 125 Protection Short-circuit current with fuses (ka rms) 80 80 80 80 80 80 80 Fuse rating 63 125 200 2 315 400 630 Peak short-circuit making capacity (ka rms) 15 20 20 30 45 45 45 Admissible short time current 1 sec (ka rms) 5 7 7 9 13 13 13 Making & breaking characteristics Breaking capacity (A rms) 415 VAC pf-0.35 4 1000 1600 2000 2520 3200 40 Making capacity (A rms) 415 VAC pf-0.35 630 12 2000 20 31 4000 6300 Endurance Mechanical No. of operations 10000 8000 8000 8000 00 00 00 Electrical No. of operations 20 1000 1000 1000 1000 1000 1000 Operating force (Nm) 3.5 9.5 9.5 11 11 17 17 Connection Min. Cu cable/bus bar size (mm 2 ) 16 95 120 185 30x5x2 40x5x2 Min. Al cable/bus bar size (mm 2 ) 25 70 1 185 240 32x8x2 40x8x2 Accessories Handle Door Interlock assembly 63 42990001GI 63 26590001GI 125 42990003GI 800-31 26590003GI 200 42990005GI 2 42990006GI 320 42990007GI 400 42990008GI 630 42990009GI acces_288_a_1_cat acces_290_a_1_cat 800 42990010GI 1000 31 42990011GI Catalogue 2015 11

LBS Load Break Switch from 63 to 31A Characteristics (continued) 800 to 31 A LBS from 800 to 31 A s GL08004POI GL010004POI GL0124POI GL016004POI GL020004POI GL0204POI GL0314POI Thermal current I th (40 C) 800 A 1000 A 12 A 1600 A 2000 A 20 A 31 A Max. Normal rating of fuses 800 1000 12 12 2 x 800 2 x 1000 2 x 12 Insulation voltage U i (V) 1000 1000 1000 1000 1000 1000 1000 Dielectric strength (V) Hz 1 mn. 8000 8000 10000 10000 10000 10000 10000 Impulse voltage (kv) 12 12 12 12 12 12 12 Rated operational currents I e (A) 415 VAC-AC 23A 800 1000 1000 1000 12 12 12 0 VAC-AC 23A 630 1000 1000 1000 1000 1000 1000 260 VDC-DC 21A 800 1000 12 1600 2000 2000 2000 260 VDC-DC 22A 800 1000 12 12 12 12 12 260 VDC-DC 23A 800 1000 12 *12 *12 *12 *12 440 VDC-DC 21A 630 1000 12 1600 2000 2000 2000 440 VDC-DC 22A 800 1000 12 12 12 12 12 440 VDC-DC 23A 800 1000 1000 1000 1000 1000 1000 Motor Power (kw) 415V 415 VAC without pre-break Aux. contact 4 560 560 560 710 710 710 0 VAC without pre-break Aux. contact 4 560 560 710 710 710 710 690 VAC without pre-break Aux. contact 185 400 400 475 475 7 7 415 VAC with pre-break Aux. contact 4 560 710 710 900 1100 1155 0 VAC with pre-break Aux. contact 5 710 710 900 900 1100 1100 690 VAC with pre-break Aux. contact 475 600 600 7 7 900 900 Motor Reactive 415 VAC (kvar) 2 x 1 3 x 1 4 x 125 5 x 1 6 x 1 7 x 1 9 x 1 Overload Capacity Short-circuit current with fuses (ka rms) 80 80 80 80 80 80 80 Fuse rating 800 1000 12 2 x 800 2 x 1000 2 x 12 2 x 12 Peak short-circuit making capacity (ka rms) 55 105 105 110 110 110 120 Admissible short time current 1 sec (ka rms) 26 55 Making & Breaking Characteristics Breaking Capacity (Arms) 415 VAC pf-0.35 6400 8000 8000 8000 10000 10000 10000 Making Capacity (Arms) 415 VAC pf-0.35 8000 10000 10000 10000 120 120 120 Endurance Mechanical No. of Operations 4000 4000 4000 3000 3000 20 20 Electrical No. of Operations 0 0 0 0 0 0 0 Operating Force (Nm) 40 40 40 40 60 60 60 Connection Min. Cu Cable / Bus bar size (mm 2 ) x5x2 60x5x2 80x5x2 100x5x2 100x5x3 100x5x4 100x10x3 Min. Al Cable / Bus bar size (mm 2 ) x8x2 x10x2 63x12x2 100x8x2 100x10x3 100x10x4 Accessories (continued) Auxiliary Contact Phase barrier 1st Auxiliary Contact 63 26091020GI 125 630 26091040GI 800 31 26091040GI 2 nd Auxiliary Contact acces_065_a 800 1600 G89B765GI 2000 31 G89B143GI acces_036_a 63 26092020GI 125 630 26092040GI 800 31 26092040GI 12 Catalogue 2015

LBS Load Break Switch from 63 to 31A Dimensions (mm) - Load break switches - 4 Poles 63 A Direct front operation External front operation O R A J N ØX T Panel Cover Thickness 1.5mm sirco-hpl_004_a_1_gb_cat B U K S M 65 Ø L V P P P W E G C 12 D±1 D1 65x65 Ø5.5 Ø32 Door Drilling for Interlock Assy. Mounting Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. A B C D D1 E G J K L M N O P R S T U V W ØX Open Ex. (kg) 4 x 63 153 106 120 134 45 70 84 138 53 6.5 15 69 69 27 14 18 2 91 8.5 17 6.5 53 0.860 125 to 630 A Direct front operation External front operation A J O R N ØX T Panel Cover Thickness 1.5mm S L sirco-hpl_005_a_1_gb_cat B U K 65 V P P P W M F E C G 12 D±1 45 65x65 Ø5.5 Ø32 Door Drilling for Interlock Assy. Mounting Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. A B C D E F G J K L M N O P R S T U V W ØX Open Ex. (kg) 4 x 125 178 142 160 171 101 72 118 159 95 7.0 15 81 81 45 22 28 3.0 118 12 12 8.5 56 1.8 4 x 200 178 155 160 171 101 72 118 159 95 7.0 15 81 81 48 25 35 4.0 123 7 7 10.5 57 2.1 4 x 2 230 192 174 187 115 79 130 212 111 7.5 20 110 110 64 32 48 4.5 152 7 13 12 64 3.1 4 x 320 230 192 174 187 115 79 130 212 111 7.5 20 110 110 64 32 48 4.5 152 7 13 12 64 3.1 4 x 400 290 235 216 225 157 98 142 271 180 9.0 30 135 135 73 40 40 5.0 205 26 26 11 86 6.0 4 x 630 290 270 216 225 157 98 142 271 180 9.0 30 135 135 81 55 55 5.0 230 14 14 14.5 86 7.0 Catalogue 2015 13

LBS Load Break Switch from 63 to 31A Dimensions (mm) - Load break switches - 4 Poles (continued) 800 to 1600 A Direct front operation External front operation A J O R N ØX L T 4xØ9 Ø15 33 8.5 33 8.5 10 800A Panel Cover Thickness 1.5mm S 16x11 1000/12A sirco-hpl_006_a_1_gb_cat B U K 25 V P P P W Handle for 800A M F E C Handle for 1000A-1600A G 14 19 25 17 19 63 1600A 4xØ13 20 40 80 20 20 40 Connection terminal 65x65 Ø5.5 D±1 81 Ø32 Door Drilling for Interlock Assy. Mounting Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. A B C D E F G J K L M N O P R S T U V W ØX Open Ex. (kg) 4 x 800 360 320 270 275 205 1 212 340 220 11 28 170 170 80 60 6.0 268 52 48 15 110 11.7 4 x 1000 496 332 270 275 205 1 165 474 220 11 28 237 237 120 63 65 6.0 267 66 48 110 16.5 4 x 12 496 332 270 275 205 1 165 474 220 11 28 237 237 120 63 65 7.0 267 66 48 111 16.8 4 x 1600 496 362 270 275 205 1 165 474 220 11 28 237 237 120 80 80 15 282 66 48 115 23.0 2000 to 31 A Direct front operation External front operation Panel Cover Thickness 1.5mm O A J N 11 1 T C 4xØ13 2000A 40 S 165 40 20 80 sirco-hpl_007_a_1_gb_cat M B U K V P P P W F E 20 35 35 120 31A 4xØ13 25 100 Connection terminal 65x65 Ø5.5 D±1 81 Ø32 Door Drilling for Interlock Assy. Mounting Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. A B C D E F J K M P S T U V W 1 Open Ex. (kg) 4 x 2000 498 4 351 365 281 235 474 330 28 120 125 8 3 62 48 88 223 38.0 4 x 20 498 4 351 365 281 235 474 330 28 120 125 10 3 62 48 89 228 39.5 4 x 31 498 0 351 365 281 235 474 330 28 120 1 15 375 62 48 82 232 58.0 14 Catalogue 2015

Enclosed LBS Load Break Switch from 63 to 1600 A Load Break Switch The solution for > OEM > Industries > Service Sector Building > Power distribution lbs_037_a Function Socomec enclosures incorporate four pole manually operated load break switches which can make and break on load and provide isolation for any low voltage electrical circuit. The enclosure provides protection against contact with live parts as well as environmental factors such as dust, water and other hazards. On load switch ON and OFF Emergency breaking Safe and local isolation of downstream loads for maintenance purpose Advantages Safety of operations Door interlocking and positive break indication provide increased safety for the operator. Inductive load breaking (AC23) This enclosure range is provided with Load Break switches which are adapted to highly inductive loads. Complete range The range offers a wide variety of variants depending on the number of poles, rating and enclosure type. General Characteristics Adapted to environments subject to chemical, dust, contamination and atmospheric corrosion risks. Black Handle pad lockable in 0/I/II position CRCA sheet (Door 1.2 mm, Body 1.6 mm) Colour shade: RAL 7035 2 external earthling points on each side. Wall mounted with 4 bolts Door locking system allows opening of door only in off position Incoming & outgoing easily interchangeable at site Coating of epoxy polyester powder 70 micron Removable plate top & bottom Door with solid hinges. Strong points > Suitable for aluminium and copper connection > High reliability and performance AC-23 > Complete range up to 31 A Conformity to standards > IS/IEC 60947-3 s & dimensions L (mm) W (mm) X (mm) (mm) H (mm) 63 GL00634POI 180 200 160 210 126 125 GL01254POI 260 2 213 285 195 200 GL02004POI 260 2 213 285 195 2 GL024POI 345 320 275 375 210 320 GL03204POI 345 320 275 375 210 400 GL04004POI 395 370 320 420 2 630 GL06304POI 395 370 320 420 2 800 GL08004POI 0 470 422 5 307 1000 GL10004POI 630 510 435 675 307 12 GL124POI 630 510 435 675 307 1600 GL16004POI 630 510 435 675 307 coff_379_a_1_x_cat W X L H For above ratings, please consult us. Catalogue 2015 15

COS OnLoad changeover switch from 63 to 31 A The solution for Changeover switches cos_002_a > Safe supply of medium critical loads Strong points Function The SOCOMEC COS is a manually operated 4 poles changeover switch. It provides safe changeover, source inversion or switching on load between two low voltage power circuits as well as their safety isolation. Operations Direct The pad lockable handle is mounted directly on the COS and lockable in OFF position. External The pad lockable handle is to be mounted on the panel door and lockable in OFF position. The external front operation ensures that the door is locked in ON position. Functional diagram General Characteristics 3 stable positions (I - O - II) Fully visualized breaking Bridging Bars mounted on all ratings as standard Very compact design Resistant to Tropical conditions and Polluted environment Quick Make & Quick Break High thermal and Dynamic withstand capacity Available in open execution and Sheet Steel Enclosure, for top or bottom connection AC23 Category Bounce Free contacts Any pole suitable for Neutral Unique Safety Handle with built in door Padlock facility High Electrical and Mechanical Endurance Terminal screens > Safe and easy to use > Stable positions > Large connection capabilities for direct aluminium connection Conformity to standards > IS/IEC 60947-3 Approvals and certifications > CPRI 1st set of aux. contacts Bridging bar 2nd set of aux. contacts Lockable handle (3 padlocks) Locking with key lock (ronis) Extension rod sirco-hpl_011_a_1_gb_cat Terminal Door cage locking U Direct handle operation Locking disc Exterior handle operation 16 Catalogue 2015

COS OnLoad changeover switch from 63 to 31 A Characteristics 63 to 630 A COS from 63 to 630 A s GCD00 634POI GCD0 1004POI GC0 1254POI GC0 1604POI GC0 2004POI GC0 24POI GC0 3204POI GC0 4004POI Thermal current I th (40 C) 63 A 100 A 125 A 160 A 200 A 2 A 320 A 400 A Max. Normal rating of fuses 63 100 125 160 200 2 315 400 Insulation voltage U i (V) 7 7 7 7 1000 1000 1000 1000 Dielectric strength (V) Hz 1 mn. 4000 4000 00 00 00 00 00 8000 Impulse voltage (kv) 6 6 6 6 8 8 8 12 Rated operational currents I e (A) 415 VAC-AC 23A 63 100** 125 160 200 2 320 400 0 VAC-AC 23A 55 55 100 130 160 200 2 315 260 VDC-DC 21A 63 100 125 160 200 2 320 400 260 VDC-DC 22A 63 100++ 125 160 200 2 320 400 260 VDC-DC 23A 63 63 125 160 160 200 2 400 440 VDC-DC 21A 63 100 125 160 200 2 320 400 440 VDC-DC 22A 63 100++ 125 130 160 200 2 400 440 VDC-DC 23A 63 63 125 130 160 200 2 400 Motor Power (kw) 415V 415 VAC without pre-break Aux. contact 30 30 63 70 80 132 160 200 0 VAC without pre-break Aux. contact 30 30 63 60 63 140 220 220 690 VAC without pre-break Aux. contact 22 22 55 55 90 1 1 415 VAC with pre-break Aux. contact 30 30 63 70 80 132 160 220 0 VAC with pre-break Aux. contact 30 30 80 70 80 160 220 280 690 VAC with pre-break Aux. contact 35 35 110 100 110 110 220 220 Motor Reactive 415 VAC (kvar) 25 25 55 60 100 125 1 Protection Short-circuit current with fuses (ka rms) 80 80 80 80 80 80 80 80 Fuse rating 63 100 125 160 200 2 315 400 Peak short-circuit making capacity (ka rms) 15 15 20 20 20 30 45 45 Admissible short time current 1 sec (ka rms) 5 5 7 7 7 9 13 13 Making & Breaking Characteristics Breaking Capacity (Arms) 415 VAC pf-0.35 4 4 1000 1280 1600 2000 2520 3200 Making Capacity (Arms) 415 VAC pf-0.35 630 630 12 1600 2000 20 31 4000 Endurance Mechanical No. of Operations 10000 10000 8000 8000 8000 8000 00 00 Electrical No. of Operations 20 10 1000 1000 1000 1000 1000 1000 Operating Force (Nm) 3.5 3.5 9.5 9.5 9.5 11 11 17 Connection Min. Cu Cable / Bus bar size (mm 2 ) 16 25 70 95 120 185 30x5x2 Min. Al Cable / Bus bar size (mm 2 ) 25 2 x 25 70 95 1 185 240 32x8x2 Accessories Handle Door Interlock assembly 63 4299 0001GI 125 4299 0003GI 200 4299 0005GI 2 4299 0006GI 320 4299 0007GI 400 4299 0008GI 630 4299 0009GI acces_288_a_1_cat 63 2659 0001GI 800 31 2659 0003GI acces_290_a_1_cat 800 4299 0010GI 1000 31 4299 0011GI Catalogue 2015 17

COS OnLoad changeover switch from 63 to 31 A Characteristics (continued) 800 to 31 A COS from 800 to 31 A s GC06304POI GC08004POI GC10004POI GC124POI GC16004POI GC20004POI GC204POI GC314POI Thermal current I th (40 C) 630 A 800 A 1000 A 12 A 1600 A 2000 A 20 A 31 A Max. Normal rating of fuses 630 800 1000 12 12 2 x 800 2 x 1000 2 x 12 Insulation voltage U i (V) 1000 1000 1000 1000 1000 1000 1000 1000 Dielectric strength (V) Hz 1 mn. 8000 8000 8000 10000 10000 10000 10000 10000 Impulse voltage (kv) 12 12 12 12 12 12 12 12 Rated operational currents I e (A) 415 VAC-AC 23A 630 800 1000 1000 1000 12 12 12 0 VAC-AC 23A 315 630 1000 1000 1000 1000 1000 1000 260 VDC-DC 21A 630 800 1000 12 1600 2000 2000 2000 260 VDC-DC 22A 0 800 1000 12 12 12 12 12 260 VDC-DC 23A 0 800 1000 12 12* 12* 12* 12* 440 VDC-DC 21A 0 630 1000 12 1600 2000 2000 2000 440 VDC-DC 22A 0 800 1000 12 12 12 12 12 440 VDC-DC 23A 0 800 1000 1000 1000 1000 1000 1000 Motor power (kw) 415V 415 VAC without pre-break Aux. contact 220 4 560 560 560 710 710 710 0 VAC without pre-break Aux. contact 220 4 560 560 710 710 710 710 690 VAC without pre-break Aux. contact 1 185 400 400 475 475 7 7 415 VAC with pre-break Aux. contact 355 4 560 710 710 900 1100 1155 0 VAC with pre-break Aux. contact 355 5 710 710 900 900 1100 1100 690 VAC with pre-break Aux. contact 295 475 600 600 7 7 900 900 Motor Reactive 415 VAC (kvar) 2 x 125 2 x 1 3 x 1 4 x 125 5 x 1 6 x 1 7 x 1 9 x 1 Protection Short-circuit current with fuses (ka rms) 80 80 80 80 80 80 80 80 Fuse rating 630 800 1000 12 2 x 800 2 x 1000 2 x 12 2 x 12 Peak short-circuit making capacity (ka rms) 45 55 105 105 110 110 110 120 Admissible short time current 1 sec (ka rms) 13 26 55 Making & breaking characteristics Breaking capacity (A rms) 415 VAC pf-0.35 40 6400 8000 8000 8000 10000 10000 10000 Making capacity (A rms) 415 VAC pf-0.35 6300 8000 10000 10000 10000 120 120 120 Endurance Mechanical No. of operations 00 4000 4000 4000 3000 3000 20 20 Electrical No. of operations 1000 0 0 0 0 0 0 0 Operating force (Nm) 17 40 40 40 40 60 60 60 Connection Min. Cu cable/bus bar size (mm 2 ) 40x5x2 x5x2 60x5x2 80x5x2 100x5x2 100x5x3 100x5x4 100x10x3 Min. Al cable/bus bar size (mm 2 ) 40x8x2 x8x2 x10x2 63x12x2 100x8x2 100x10x3 100x10x4 * AC 22 A. Accessories (continued) Auxiliary contact Phase barrier 1 st Auxiliary contact Small 63 26091020GI 125 630 26091040GI 800 31 26091040GI 2 nd Auxiliary contact 63 26092020GI 125 630 26092040GI 800 31 26092040GI acces_065_a 800 31 G89B136GI Big 800 1600 G89B143GI 2000 31 G89B491GI acces_036_a 18 Catalogue 2015

COS OnLoad changeover switch from 63 to 31 A Accessories (continued) Bridging Bars 63 100 4109 4006-SA 125 4109 4013-SA 160 200 4109 4020-SA 2 320 4109 4032-SA 400 4109 4040-SA 630 4109 4063-SA 800 4109 4080-SA 1000 4109 4100-SA 12 4109 4120-SA 1600 4109 4160-SA 2000 4109 4200-SA 20 4109 42-SA 31 4109 4310-SA acces_205_a Dimensions (mm) 63 to 100 A Direct front operation External front operation R A A1 J ØX J1 L 1 S T Panel Cover Thickness 1.2mm B svr-hpl_007_a_1_x_cat K U Z V P M I W II N E G C 12 D±1 45 65x65 Ø32 Ø5.5 Door Drilling for Interlock Assy. Mounting Dimensions Fixing of Sw. Connection terminal Sw. Wt. A A1 B C D E G J J1 K L M N P R S T U V W X 1 Z 4 x 63 200 141.5 111 168.5 192 127 84 116 18.25 95 6.5 127 7.25 27 14 16 2.0 91 11 35 6.5 45 101 7.5 2 4 x 100 200 141.5 111 168.5 192 127 84 116 18.25 95 6.5 127 7.25 27 14 16 2.0 91 11 35 6.5 45 101 7.5 2 Open Ex. (kg) 125 to 630 A Direct front operation External front operation R J A A1 ØX J1 L 1 T Panel Cover Thickness 1.5mm S D±1 D1 B K U II I svr-hpl_008_a_1_x_cat V P P P W N E G C 20 Ø5.5 65x65 Ø32 Door Drilling for Interlock Assy. Mounting Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. Open Ex. A A1 B C D D1 E G J J1 K L N P R S T U V W X 1 (kg) 4 x 125 305 232 142 216 232 65 151 118 159 58 95 7.0 26 45 22 28 3.0 118 12 12 8.5 54 120 4.0 4 x 160 305 232 155 216 232 65 151 118 159 58 95 7.0 26 48 25 35 4.0 123 7 7 10.5 54 120 5.0 4 x 200 363 285 192 238 249 65 173 130 212 63 111 7.5 27 64 32 46 46 152 7 13 12 62 140 7.3 4 x 2 363 285 192 238 249 65 173 130 212 63 111 7.5 27 64 32 46 4.5 152 7 13 12 62 140 7.3 4 x 320 363 285 192 238 249 65 173 130 212 63 111 7.5 27 64 32 46 4.5 152 7 13 12 62 140 7.3 4 x 400 458 360 235 307 320 65 242 142 271 80 180 9.0 45 73 40 40 5.0 205 26 26 11 84 195 14.0 4 x 630 458 360 270 307 320 65 242 142 271 80 180 9.0 45 81 55 55 5.0 230 14 14 14.5 84 195 17.0 Catalogue 2015 19

COS OnLoad changeover switch from 63 to 31 A Dimensions (mm) 800 to 1600 A Direct front operation External front operation 4xØ9 800A Panel Cover Thickness 1.5mm R A A1 J ØX J1 L 1 T Ø15 8.5 33 8.5 10 16x11 33 1000/12A B svr-hpl_009_a_1_x_cat K U V P P P W N Handle for 800A II I S Handle for 1000A-1600A G E C 20 19 25 25 17 19 63 1600A 4xØ13 20 40 80 20 20 40 Connection terminal 65x65 Ø5.5 D±1 81 Ø32 Door Drilling for Interlock Assy. Mounting Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. A A1 B C D D1 E G J J1 K L N P R S T U V W ØX 1 4 x 800 610 432 320 370 380 81 305 212 340 84 220 11.5 80 60 6.0 268 52 48 15 107 251 27.2 4 x 1000 703 565 332 370 380 81 305 165 474 84 220 11.5 120 63 65 6.0 267 66 48 107 251 35.3 4 x 12 703 565 332 370 380 81 305 165 474 84 220 11.5 120 63 65 7.0 267 66 48 108 252 37.0 4 x 1600 703 565 362 370 380 81 305 165 474 84 220 11.5 120 80 80 15 282 66 48 112 256 61.0 Open Ex. (kg) 2000 to 31 A Direct front operation External front operation A1 J A J1 11 4 5 C T 4xØ13 2000A 40 Panel Cover Thickness 1.5mm 9/11 10/12 B svr-hpl_010_a_1_x_cat U K 12.5 V P P P W II 0 51.5 I S 1 2 3 T 165 20 40 20 80 35 35 120 31A 4xØ13 25 100 Connection terminal 65x65 1/5 3/7 2/6 4/8 D±1 81 Ø5.5 Ø32 Door Drilling for Interlock Assy. Mounting Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. Open Ex. A A1 B C D J J1 K P S T U V W /4 1 2 3/5 (kg) 4 x 2000 703 570 4 578 580 474 84 330 120 125 8 3 66 48 88 223 318 4 72 4 x 20 703 570 4 578 580 474 84 330 120 125 10 3 66 48 89 228 315 454 77.4 4 x 31 703 570 0 578 580 474 84 330 120 1 15 375 66 48 82 232 305 458 110 20 Catalogue 2015

Enclosed COS OnLoad changeover switch from 63 to 31 A The solution for Changeover switches > Standby power coff_246_a Function Manually operated sheet steel enclosed changeover switches provide changeover, source inversion or switching under load between two low voltage power circuits, as well as their safety isolation. The enclosure provides protection against contact with live parts as well as environmental factors such as dust, water and other hazards. On load manual changeover between 2 sources Emergency breaking Selection between two loads Safe isolation of downstream loads for maintenance purpose Advantages On load operation (AC22/AC23) Manual changeover enclosures are designed for operation on load and are able to make and break mixed/inductive loads (utilisation categories AC22/AC23). Robust product Products have been designed for severe industrial conditions with chemical, pollution or atmospheric corrosion risks. s & dimensions General Characteristics Adapted to environments subject to chemical, dust, contamination and atmospheric corrosion risks. Black Handle padlockable in 0/I/II position CRCA sheet (Door 1.2 mm, Body 1.6 mm) Colour shade: RAL 7035 2 external earthing points on each side Wall mounted with 4 bolts Door locking system allows opening of door only in off position Incoming & outgoing easily interchangeable at site Coating of epoxy polyester powder 70 micron Removable plate top & bottom Door with solid hinges Strong points > Safe and easy to use > Stable positions > Large connection capabilities for direct aluminium cable connection Conformity to standards > IS/IEC 60947-3 L (mm) W (mm) X (mm) (mm) H (mm) 63 GCD00634PEI 2 200 160 280 212 100 GCD01004PEI 2 200 160 280 212 125 GCD01254PEI 355 285 245 385 254 160 GC01604PEI 355 285 245 385 254 200 GC02004PEI 355 285 245 385 254 2 GC024PEI 425 375 335 455 271 320 GC03204PEI 425 375 335 455 271 400 GC04004PEI 510 475 422 560 342 630 GC06304PEI 510 475 422 560 342 800 GC08004PEI 555 470 422 605 404 1000 GC10004PEI 800 655 600 825 423 12 GC124PEI 800 655 600 825 423 1600 GC16004PEI 800 655 600 825 423 2000 GC20004PEI 800 7 685 825 632 20 GC204PEI 800 7 685 825 632 31 GC314PEI 800 7 685 825 632 coff_379_a_1_x_cat W X L H Catalogue 2015 21

Fuse COS Fuse changeover switch from 125 to 630 A The solution for Changeover switches > Safe supply of medium critical loads, with protection sfc_001_a Strong points > Safe and easy to use > Stable positions > Large connection capabilities for direct aluminium cable connection > Overload and short-circuit current protection up to 80kA Function The SOCOMEC fuse COS is a manually operated 4 poles changeover with protective devices as HRC fuses mounted on the load side. The switch is provided with an isolating neutral and offers protection against overload and short-circuit in position I and II. General Characteristics 3 stable positions (I - O - II) Bridging Bars mounted on all ratings as standard Very compact design Resistant to Tropical conditions and Polluted environment Quick Make & Quick Break High thermal and Dynamic withstand capacity Available in open execution and Sheet Steel Enclosure for top or bottom cable connection Operations Direct The pad lockable handle is mounted directly on the Fuse COS and lockable in OFF position. External The pad lockable handle is to be mounted on the panel door and lockable in OFF position. The external front operation ensures that the door is interlocked in ON position. High performance: AC23 Category Bounce Free contacts Unique Safety Handle with built in door Padlock facility High Electrical and Mechanical Endurance BS type HRC fuses Prospective short-circuit rating with fuses up to 80kA rms Conformity to standards > IS/IEC 60947-3 Approvals and certifications > CPRI 22 Catalogue 2015

Fuse COS Fuse changeover switch from 125 to 630 A Characteristics 125 to 630 A Fuse COS from 125 to 630 A s GF01254POI (1) GF02004POI (1) GF024POI (1)(2) GF03204POI (1) GF04004POI (1)(2) GF06304POI (1)(2) Thermal current I th (40 C) 125 A 200 A 2 A 320 A 400 A 630 A Max. Normal rating of fuses 125 200 2 315 400 630 Insulation voltage U i (V) 1000 1000 1000 1000 1000 1000 Dielectric strength (V) Hz 1 mn. 00 00 00 00 8000 8000 Impulse voltage (kv) 6 6 8 8 12 12 Rated operational currents I e (A) 415 VAC-AC 23A 125 200 2 320 400 630 0 VAC-AC 23A 100 160 200 2 315 315 260 VDC-DC 21A 125 200 2 320 400 630 260 VDC-DC 22A 125 200 2 320 400 0 260 VDC-DC 23A 125 160 200 2 400 0 440 VDC-DC 21A 125 200 2 320 400 0 440 VDC-DC 22A 125 160 200 2 400 0 440 VDC-DC 23A 125 160 200 2 400 0 Motor power (kw) 415V 415 VAC without pre-break Aux. contact 63 80 132 160 200 220 0 VAC without pre-break Aux. contact 63 63 140 220 220 220 690 VAC without pre-break Aux. contact 55 55 90 1 1 1 415 VAC with pre-break Aux. contact 63 80 132 160 220 355 0 VAC with pre-break Aux. contact 80 80 160 220 280 355 690 VAC with pre-break Aux. contact 110 110 110 220 220 295 Motor reactive 415 VAC (kvar) 55 60 100 125 1 2 x 125 Protection Short-circuit current with fuses (ka rms) 80 80 80 80 80 80 Fuse rating 125 200 2 315 400 630 Fuse type A4 A4 B1 B1 C1 C1 Peak short-circuit making capacity (ka rms) 20 20 30 45 45 45 Admissible short time current 1 sec (ka rms) 7 7 9 13 13 13 Making & breaking characteristics Breaking capacity (A rms) 415 VAC pf-0.35 1000 1600 2000 2520 3200 40 Making capacity (A rms) 415 VAC pf-0.35 12 2000 20 31 4000 6300 Endurance Mechanical No. of operations 8000 8000 8000 00 00 00 Electrical No. of operations 1000 1000 1000 1000 1000 1000 Operating force (Nm) 9.5 9.5 11 11 17 17 Connection Min. Cu cable/bus bar size (mm 2 ) 95 120 185 30x5x2 40x5x2 Min. Al cable/bus bar size (mm 2 ) 70 1 185 240 32x8x2 40x8x2 1. Includes switch + handle + door interlock. 2. A NO/NC factory fitted. Catalogue 2015 23

Fuse COS Fuse changeover switch from 125 to 630 A Accessories Handle Door Interlock assembly 125 4299 0003GI 200 2 4299 0005GI 320 4299 0007GI 400 4299 0008GI 630 4299 0009GI acces_288_a_1_cat 125 630 4259 0003GI acces_290_a_1_cat Bridging bars Auxiliary Contact 125 41094013F-SA 200 320 41094032F-SA 400 41094040F-SA 630 41094063F-SA acces_205_a 1st Auxiliary Contact 125 630 42091040GI 2 nd Auxiliary Contact 125 630 42092040GI Dimensions (mm) 125 to 630 A Direct front operation External front operation PANEL COVER THICKNESS 1.5 A A1 J J1 R ØX L T 1 Incomming Supply Barriers Fuse Barrier B U K I D±1 D1 G S acces_065_a Phase barrier Fuse barrier 125 G89B 595GI 200 320 G89B 596GI 400 630 G89B 597GI acces_036_a 125 G891 088GI 200 320 G891 157GI 400 630 G89B 594GI O sfc_002_a_1_x_cat V P P P W N E F C 20 65X65 Ø32 (4NOS) Ø5.5 DOOR DRILLING FOR INTERLOCK ASS. MOUNTING Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. Open Ex. A A1 B C D D1 E F G J J1 K L N P R S T U V W ØX 1 (kg) 4 x 125 305 232 142 275 287 65 1 185 118 159 58 95 7.0 26 45 22 28 3.0 118 12 12 8.5 54 120 5.5 4 x 200 363 285 192 315 328 65 177 208 130 212 63 111 7.5 27 64 32 46 4.5 152 7 13 12 62 140 10.2 4 x 2 363 285 192 315 328 65 177 208 130 212 63 111 7.5 27 64 32 46 4.5 152 7 13 12 62 140 10.2 4 x 320 363 285 192 315 328 65 177 208 130 212 63 111 7.5 27 64 32 46 4.5 152 7 13 12 62 140 10.2 4 x 400 458 360 235 401 413 65 254 298 142 271 80 180 9.0 45 73 40 40 5.0 205 26 26 11 84 195 19.3 4 x 630 458 360 270 401 413 65 254 298 142 271 80 180 9.0 45 81 55 55 5.0 230 14 14 14.5 84 195 25.6 24 Catalogue 2015

Enclosed fuse COS Fuse changeover switch from 125 to 630 A The solution for Changeover switches > Safe supply of medium critical loads, with protection Function sfc_001_a General Characteristics Strong points > Safe and easy to use > Stable positions > Large connection capabilities for direct aluminium cable connection > Overload and short-circuit current protection up to 80 ka Manually operated sheet steel enclosed fuse changeover switches provide changeover, source inversion or switching under load between two low voltage power circuits, their safety isolation and overload as well as shortcircuit protection. The enclosure provides protection against contact with live parts as well as environmental factors such as dust, water and other hazards. On load manual changeover between 2 sources Emergency breaking Selection between two loads Safe isolation of downstream loads for maintenance purpose Protection of the downstream load against short-circuits and overloads. Black handle padlockable in 0/I/II position CRCA sheet (Door 1.2 mm, Body 1.6 mm) Colour shade: RAL 7035 2 external earthing points on each side Wall mounted with 4 bolts Door locking system allows opening of door only in off position Incoming & outgoing easily interchangeable at site Coating of epoxy polyester powder 70 micron Removable plate top & bottom Door with solid hinges BS type HRC fuses Prospective short-circuit rating with fuses up to 80 ka rms Conformity to standards > IS/IEC 60947-3 s & dimensions L L (mm) W (mm) X (mm) (mm) H (mm) 125 GF01254PEI 355 285 245 385 310 200 GF02004PEI 425 375 335 455 353 2 GF024PEI 425 375 335 455 353 320 GF03204PEI 425 375 335 455 353 400 GF04004PEI 510 475 422 560 437 630 GF06304PEI 510 475 422 560 437 W X H sfc_009_a_1_x_cat Catalogue 2015 25

Bypass COS Bypass changeover switch from 125 to 1600 A The solution for Changeover switches cos_005_a > Bypass of an electrical equipment. E.g. UPS... Strong points Function The SOCOMEC bypass COS is a manually operated changeover switch. It is a combination of three interlocked switches enabling the use with 4 + 8 poles. It insulates by providing simultaneous safety isolation top and bottom and Bypassing loads of low voltage circuits mainly during maintenance operations. Operations Direct The pad lockable handle is mounted directly on the B-PASS and lockable in OFF position. External The pad lockable handle is to be mounted on the panel door and can be locked in OFF position. The external front operation ensures that the door is interlocked in ON position. General Characteristics 3 stable positions (I - O - II) Very compact design Resistant to Tropical conditions and Polluted environment Quick Make & Quick Break High thermal and Dynamic withstand capacity Available in open execution and Sheet Steel Enclosure for top or bottom cable connection High performance : AC23 category Bounce Free contacts Any pole suitable for Neutral Unique Safety Handle with built in door Padlock facility High Electrical and Mechanical Endurance > Safe and easy to use > Bypass with a single operation > Large connection capabilities for direct aluminium cable connection Conformity to standards > IS/IEC 60947-3 Approvals and certifications > CPRI Functional diagram atys_570_a_1_x_cat 26 Catalogue 2015

Bypass COS Bypass changeover switch from 125 to 1600 A Characteristics 125 to 1600 A s GBP01254POI (1) GBP02004POI (1) GBP024POI (1) (2) GBP03204POI (1) (2) GBP04004POI (1) (2) GBP06304POI (1) (2) GBP08004POI (1) (2) GBP10004POI (1) (2) GBP124POI GBP16004POI (1) (2) (1) (2) Thermal current I th (40 C) 125 A 200 A 2 A 320 A 400 A 630 A 800 A 1000 A 12 A 1600 A Max. Normal rating of fuses 125 200 2 315 400 630 800 1000 12 1600 Insulation voltage U i (V) 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Dielectric strength (V) Hz 1 mn. 00 00 00 00 8000 8000 8000 8000 10000 10000 Impulse voltage (kv) 6 6 8 8 12 12 12 12 12 12 Rated operational currents I e (A) 415 VAC-AC 23A 125 200 2 320 400 630 800 1000 1000 1000 0 VAC-AC 23A 100 160 200 2 315 315 630 1000 1000 1000 260 VDC-DC 21A 125 200 2 320 400 630 800 1000 12 1600 260 VDC-DC 22A 125 200 2 320 400 0 800 1000 12 12 260 VDC-DC 23A 125 160 200 2 400 0 800 1000 12 12* 440 VDC-DC 21A 125 200 2 320 400 0 630 1000 12 1600 440 VDC-DC 22A 125 160 200 2 400 0 800 1000 12 12 440 VDC-DC 23A 125 160 200 2 400 0 800 1000 1000 1000 Motor power (kw) 415V 415 VAC without pre break Aux. contact 63 80 132 160 200 220 4 560 560 560 0 VAC without pre break Aux. contact 63 63 140 220 220 220 4 560 560 710 690 VAC without pre break Aux. contact 55 55 90 1 1 1 185 400 400 475 415 VAC with pre break Aux. contact 63 80 132 160 220 355 4 560 710 710 0 VAC with pre break Aux. contact 80 80 160 220 280 355 5 710 710 900 690 VAC with pre break Aux. contact 110 110 110 220 220 295 475 600 600 7 Motor Reactive 415 VAC (kvar) 55 60 100 125 1 2 x 125 2 x 1 3 x 1 4 x 125 5 x 1 Protection Short-circuit current with fuses (ka rms) 80 80 80 80 80 80 80 80 80 80 Fuse rating 125 200 2 315 400 630 800 1000 12 2x00 Peak short-circuit making capacity (ka rms) 20 20 30 45 45 45 55 105 105 110 Admissible short time current 1 sec (ka rms) 7 7 9 13 13 13 26 Making & breaking characteristics Breaking Capacity (A rms) 415 VAC pf-0.35 1000 1600 2000 2520 3200 40 6400 8000 8000 8000 Making Capacity (A rms) 415 VAC pf-0.35 12 2000 20 31 4000 6300 8000 10000 10000 10000 Endurance Mechanical No. of operations 8000 8000 8000 00 00 00 4000 4000 4000 3000 Electrical No. of operations 1000 1000 1000 1000 1000 1000 0 0 0 0 Operating force (Nm) 9.5 9.5 11 11 17 17 40 40 40 40 Connection Min. Cu cablebus bar size (mm 2 ) 95 120 185 30x5x2 40x5x2 x5x2 60x5x2 80x5x2 100x5x2 Min. Al cablebus bar size (mm 2 ) 70 1 185 240 32x8x2 40x8x2 x8x2x x10x2 63x12x2 100x8x2 1. Includes switch + handle + door interlock. 2. A NO/NC factory fitted. Accessories Handle Bridging bars Auxiliary Contact 125 41990001GI 200 41990002GI 2 41990003GI 320 41990004GI 400 41990005GI 630 41990006GI 800 1600 42990011GI Door Interlock assembly 125 630 42590003GI 800 1600 42590004GI 125 41094013-SA 200 41094020-SA 2 320 41094032-SA 400 41094040-SA 630 41094063-SA 800 41094080-SA 1000 41094100-SA 12 41094120-SA 1600 41094160-SA 1 st Auxiliary contact 2 nd Auxiliary contact 125 400 42091040GI 125 400 42092040GI 630 42091040GI 630 42092040GI 800 1600 420910GI 800 1600 42092060GI Phase barrier Type Small G89B604GI 800 1600 Big G89B766GI Catalogue 2015 27

Bypass COS Bypass changeover switch from 125 to 1600 A Dimensions (mm) 125 to 630 A Direct front operation External front operation PANEL COVER THICKNESS 1.5 A R J A1 ØX J1 L T E C S B U K D D1 cos_007_a_1_x_cat V P P P W N 1 2 G 15 65X65 (4NOS) Ø5.5 Ø31 DOOR DRILLING FOR INTERLOCK ASS. MOUNTING Dimensions Fixing of Sw. Connection terminal Sw. Wt. Open Ex. A A1 B C D D1 E G J J1 K L N P R S T U V W ØX 1 2 (kg) 4 x 125 305 232 142 347 297 65 282 140 159 58 95 7.0 26 45 22 28 3.0 118 12 12 8.5 54 120 186 6.0 4 x 200 305 232 155 347 297 65 282 140 159 58 95 7.0 26 48 25 35 4.0 123 7 7 10.5 54 120 186 7.0 4 x 2 363 285 192 351 327 65 316 140 212 63 111 7.5 27 64 32 46 4.5 152 7 13 12 62 140 218 10.0 4 x 320 363 285 192 351 327 65 316 140 212 63 111 7.5 27 64 32 46 4.5 152 7 13 12 62 140 218 10.0 4 x 400 458 360 235 483 430 65 418 140 271 80 180 9.0 45 73 40 40 5.0 205 26 26 11 84 195 306 20.0 4 x 630 458 360 270 483 430 65 418 140 271 80 180 9.0 45 81 55 55 5.0 230 14 14 14.5 84 195 306 26.0 800 to 1600 A Direct front operation External front operation 4Ø09 800 A Ø15 33 8.5 33 8.5 10 R A1 J A J1 L C E T U K PANEL COVER THICKNESS 1.5 1000/12 A 16x11 25 19 25 19 17 63 1600 A D D1 4XØ13 cos_008_a_1_x_cat V P P P W N 1 2 G 15 20 40 20 80 20 40 CONNECTION TERMINAL 65X65 (4NOS) Ø5.5 Ø32 DOOR DRILLING FOR INTERLOCK ASS. MOUNTING Overall dimensions Fixing of Sw. Connection terminal Sw. Wt. Open Ex. A A1 B C D D1 E G J J1 K L N P R T U W V ØX 1 2 (kg) 4 x 800 610 432 320 521 521 81 448 165 340 84 220 11.5 80 6 268 52 48 15 107 251 395 4.0 4 x 1000 703 565 332 521 521 81 448 165 474 84 220 11.5 120 63 6 267 66 48-107 251 395 5.0 4 x 12 703 565 332 521 521 81 448 165 474 84 220 11.5 120 63 7 267 66 48-108 252 396 7.3 4 x 1600 703 565 362 521 521 81 448 165 474 84 220 11.5 120 80 15 282 66 48-112 256 400 7.3 28 Catalogue 2015

Enclosed bypass COS Bypass changeover switch from 125 to 1600 A The solution for Changeover switches > Bypass of an electrical equipment. E.g. UPS... Function Manually operated sheet steel enclosed bypass COS changeover switches provide bypass function of an electrical equipment as well as its safety isolation. The enclosure provides protection against contact with live parts as well as environmental factors such as dust, water and other hazards. On load switch ON and OFF + B-PASS mode to insulate any loads (UPS, VSD ) while maintaining the supply during maintenance. Emergency breaking Safe and local isolation of downstream + upstream for maintenance purpose General Characteristics Black Handle padlockable in 0/I/II position CRCA sheet (Door 1.2 mm, Body 1.6 mm) Colour shade: RAL 7035 2 external earthing points on each side Wall mounted with 4 bolts Door locking system allows opening of door only in off position Incoming & outgoing easily interchangeable at site Coating of epoxy polyester powder 70 micron Removable plate top & bottom Door with solid hinges Strong points > Safe and easy to use > Bypass with a single operation > Large connection capabilities for direct aluminium cable connection Conformity to standards > IS/IEC 60947-3 s & dimensions L (mm) W (mm) X (mm) (mm) H (mm) 125 GBP01254PEI 355 285 245 385 324 200 GBP02004PEI 355 285 245 385 324 2 GBP024PEI 425 375 335 455 354 320 GBP03204PEI 425 375 335 455 354 400 GBP04004PEI 510 475 422 560 457 630 GBP06304PEI 510 475 422 560 457 800 GBP08004PEI 555 470 422 605 545 For above ratings, contact us W X L H cos_010_a_1_x_cat Catalogue 2015 29

Motorised COS Motorised changeover switch from 125 to 1600 A The solution for Changeover switches cos_003_a > AMF panel Strong points Function The SOCOMEC Motorized Changeover Switch is a motor operated 4 Pole changeover switch. It provides safe changeover giving two stable position I & II and help in changeover from one supply source to another remotely. In case of control supply failure, emergency handle arrangement is provided for manual operation of switch in OFF position or selecting the supply. Operations I Circuit I close and circuit II open (transfer supply ON and generator supply OFF. II Circuit I open circuit II close ( generator supply ON and transformer supply OFF ). 0 Circuits I & II open. This position can only be achieved through manual operation and ensure a safe maintenance of the installation. General Characteristics 3 stable positions, mechanically interlocked ( I 0 II ) Optional overlapping contacts (I, I+II, II) High performance on load switching (AC-22 and AC-23) Fully apparent position through indicator Dry contact electrical position control Manual Emergency operation Locking feature available in all 3 positions Large Power control supply range: 230V +/- 15% Functional diagram 1 > Factory fitted auxiliary contacts > Stable positions > Large connection capabilities for aluminium connection Conformity to standards > IS/IEC 60947-3 Approvals and certifications > CPRI 2 4 5 3 6 7 8 9 10 svrmo_006_c_1_cat 11 30 Catalogue 2015