Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1 Oval handles optionally available 1/4" & 3/8" only 1. andle Grip / Vinyl 2. andle / arbon Steel Plated 3. andle Nut / arbon Steel Plated 4. Packing ushing / Stainless Steel 276 Type 34 5. Packing / PT 6. Stem / Stainless Steel 276 Type 316 7. Thrust Washer / R-PT 15% Glass-illed 8. Seat / R-PT 15% Glass-illed 9. Seat Retainer / arbon Steel 18 GR 12 1. Gasket / PT 11. all / Stainless Steel 351 8M (316) 12. ody / arbon Steel 18 GR.12 (15 on 2") 13. Stem Washer / Stainless Steel 276 Type 34 14. elleville Washer / Stainless Steel 31 15. Spring Washer / Stainless Steel 276 Type 34 size 8 1 15 2 25 32 4 5 mm/in 1 /4 3 /4 1 1 1 /4 1 1 /2 2 71. 85.5 19.47 112.5 112.5 147.5 147.5 154. mm/in 2.8 3.37 4.31 4.43 4.43 5.81 5.81 6.6 23.9 26.5 32.95 37.25 44.5 48.6 52.55 57.7 mm/in.94 1.3 1.3 1.47 1.75 1.91 2.7 2.27 43.1 47.35 61.72 69.85 85.73 93.67 11.6 114.3 mm/in 1.7 1.86 2.43 2.75 3.38 3.69 4. 4.5 3. 33.35 54.41 55. 61.5 73.5 75. 85.5 mm/in 1.8 1.31 2.14 2.17 2.62 2.89 2.95 3.37 4.6 6.8 9.2 12.5 16. 2. 24.7 32. mm/in.18.27.36.49.63.79.97 1.26 V 1.5 3.5 5.7 1 16 25 4 62 weights.1.153.315.46.69 1.439 1.455 2.7 kg/lb.22.337.693 1.12 1.518 3.166 3.21 5.94 PSG 1 KPG /4" - 2" 1º (38º) 2 15 1 8 6 4 3 2 15 1 5 1342 268 134-2 5 1 15 2 25 3 35 4 45 5 (º) -29-18 1 38 66 93 121 149 177 24 232 26 (º) MS 215/5/26 31/5/11
Series arbon Steel all Valves SR-2 4.2 2 WOG -216 W N MR-175 97 SR-2 3/4" Large port NPT ends to NS 1.2.1 Two piece body lowout-proof stem djustable packing gland ctuator mounting pad 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 *Optional; Model LSSR-2 (L body/cap) for -5 /-46 service is available ( 1 /4" to 1") (1 1 /4" to 2") G Ø SR-2 *LSSR-2 1. andle Grip / Vinyl 2. andle / Stainless Steel 276 Type 34 3. Locking evice / Stainless Steel 276 Type 34 4. andle Nut / Stainless Steel 276 Type 34 5. Stem Washer / Stainless Steel 276 Type 34 6. Gland Nut / arbon Steel 18 7. Packing / PT 8. Stem / Stainless Steel 276 Type 316 9. Thrust Washer / R-PT 15% Glass-illed 1. Gasket / PT 11. all / Stainless Steel 351-8M (316) 12. ody / ast Steel 216 W *(352 L) 13. Seat / R-PT 15% Glass-illed 14. ap / ast Steel 216 W *(352 L) size 8 1 15 2 25 32 4 5 mm/in 1 /4 3 /4 1 1 1 /4 1 1 /2 2 11. 12.5 12.5 17.5 2.6 25. 31.8 38. mm/in.433.492.492..866.964 1.252 1.496 13.5 13.5 13.5 125. 125. 193. 193. 193. mm/in 4.75 4.75 4.75 4.921 4.921 7.598 7.598 7.598 58.5 58.5 61.5 79.5 88.5 12 111 137 mm/in 2.33 2.33 2.421 3.13 3.484 4.16 4.37 5.394 54. 54. 57. 65.5 69.5 88.5 94.5 17. mm/in 2.13 2.13 2.24 2.58 2.74 3.484 3.72 4.213 M6 M6 M6 M6 M6 M8 M8 M8 mm/in M6 M6 M6 M6 M6 M8 M8 M8 12.7 12.7 12.7 22.1 22.1 5. 5. 5. mm/in.5.5.5.87.87 1.968 1.968 1.968 SO lange 5 5 5 G 28.45 28.45 28.45 34.8 34.8 mm/in 1.12 1.12 1.12 1.37 1.37 24.5 24.5 22.5 27.5 27.5 24.5 24.5 26. mm/in.965.965.886 1.83 1.83.965.965 1.24 5.5 5.5 5.5 6.5 6.5 8. 8. 1. mm/in.217.217.217.256.256.315.315.394 7.7 7.7 7.7 9.3 9.3 12.5 12.5 15.6 mm/in.33.33.33.367.367.462.492.614 V 8 1 15 3 4 48 8 18 weights.347.331.314.62.781 1.477 1.987 2.633 kg/lb.763.728.691 1.324 1.718 3.249 4.371 5.793 ll mounting pads are not tapped, but have reserve holes cast in (except 3/4" and 1" which are dimpled). Recommended tapping sizes are listed for reference only. PSG 1 KPG /4" - 2" 1º (38º) 2 15 1 8 6 4 3 2 15 1 5 1342 268 134-2 5 1 15 2 25 3 35 4 45 5 (º) -29-18 1 38 66 93 121 149 177 24 232 26 (º) MS 215/5/26 31/5/11
Series arbon Steel, eadman Spring andle all Valves SR-2-M Lever nergized (Open) Lever e-nergized (losed) Large port NPT ends to NS 1.2.1 Two piece body lowout-proof stem djustable packing gland eadman handle ctuator mounting pad omplies with N MR-13 & Supplier Requirements of N MR-175/SO 15156 2 P.S.. W.O.G. 4.3 1. andle Grip / Vinyl 2. andle / Stainless Steel 276 Type 34 3. Rod / Stainless Steel 276 Type 34 4. Spring / 29 GR.926 5. nchor Screw / Stainless Steel 276 Type 34 6. andle Nut / S Plated 7. nchor / Stainless Steel 351 8M (316) 8. Gland Nut / Stainless Steel 276 Type 34 9a. Packing Washer / PK 9b. Packing / RPT 1. Stem / Stainless Steel 276 Type 316 11. Thrust Washer / RPT 12. Gasket / PT 13. Seat / RPT 14. ap / ast Steel 216 W 15. all / Stainless Steel 351 8M (316) 16. ody / ast Steel 216 W size 8 1 15 2 25 32 4 5 mm/in 1 /4 3 /4 1 1 1 /4 1 1 /2 2 11. 12.5 12.5 17.5 2.6 25. 31.8 38. mm/in.433.492.492..866.964 1.252 1.496 29.3 29.3 29.3 35.9 38.4 48.6 51.4 59.5 mm/in 1.154 1.154 1.154 1.415 1.514 1.913 2.23 2.341 58.5 58.5 61.5 79.5 87.5 12 111 136 mm/in 2.33 2.33 2.421 3.13 3.484 4.16 4.37 5.394 18.5 18.5 18.5 232.5 232.5 29. 29. 313. mm/in 7.16 7.16 7.16 9.154 9.154 11.417 11.417 12.323 22. 22. 22. 22. 22. 22. 22. 32. mm/in.866.866.866.866.866.866.866 1.28 V 8 1 15 3 4 48 8 18 weights.69.672.671.92 1.94 1.75 2.354 2.974 kg/lb 1.521 1.481 1.479 2.28 2.411 3.759 5.19 6.556 PSG KPG /4" - 2" 1º (38º) 2 15 1 8 6 4 3 2 15 1 5 1342 268 134-2 5 1 15 2 25 3 35 4 45 5 (º) -29-18 1 38 66 93 121 149 177 24 232 26 (º) MS 215/5/26 31/5/11
Series arbon Steel, 25 Steam Rated all Valves SR-2-25 4.4 2 WOG -216 W N MR-175 97 SR-2 3/4" Large port NPT threads to NS 1.2.1 Two piece body 25 PSG Steam Trim lowout-proof stem djustable packing gland Locking lever handle ctuator mounting pad omplies with N MR-13 N MR-175/SO 15156 2 p.s.i., W.O.G. ( 1 /4" to 1") (1 1 /4" to 2") G 1. andle Grip / Vinyl 2. andle / Stainless Steel 276 Type 34 3. Locking evice / Stainless Steel 276 Type 34 4. andle Nut / Stainless Steel 276 Type 34 5. Stem Washer / Stainless Steel 276 Type 34 6. Gland Nut / arbon Steel 18 7. Packing / R-PT (TM-4215) 8. Stem / Stainless Steel 276 Type 316 9. Thrust Washer / R-PT (TM-4215) 1. Gasket / R-PT (TM-4215) 11. all / Stainless Steel 351 8M (316) 12. ody / ast Steel 216 W 13. Seat / R-PT (TM-4215) 14. ap / ast Steel 216 W Ø size 8 1 15 2 25 32 4 5 mm/in 1 /4 3 /4 1 1 1 /4 1 1 /2 2 11. 12.5 12.5 17.5 2.6 25. 31.8 38. mm/in.433.492.492..866.964 1.252 1.496 13.5 13.5 13.5 125. 125. 193. 193. 193. mm/in 4.75 4.75 4.75 4.921 4.921 7.598 7.598 7.598 58.5 58.5 61.5 79.5 88.5 12 111 137 mm/in 2.33 2.33 2.421 3.13 3.484 4.16 4.37 5.394 54. 54. 57. 65.5 69.5 88.5 94.5 17. mm/in 2.13 2.13 2.24 2.58 2.74 3.484 3.72 4.213 M6 M6 M6 M6 M6 M8 M8 M8 mm/in M6 M6 M6 M6 M6 M8 M8 M8 12.7 12.7 12.7 22.1 22.1 5. 5. 5. mm/in.5.5.5.87.87 1.968 1.968 1.968 SO lange 5 5 5 G 28.45 28.45 28.45 34.8 34.8 mm/in 1.12 1.12 1.12 1.37 1.37 24.5 24.5 22.5 27.5 27.5 24.5 24.5 26. mm/in.965.965.886 1.83 1.83.965.965 1.24 5.5 5.5 5.5 6.5 6.5 8. 8. 1. mm/in.217.217.217.256.256.315.315.394 7.7 7.7 7.7 9.3 9.3 12.5 12.5 15.6 mm/in.33.33.33.367.367.462.492.614 V 8 1 15 3 4 48 8 18 weights.347.331.314.62.781 1.477 1.987 2.633 kg/lb.763.728.691 1.324 1.718 3.249 4.371 5.793 ll mounting pads are not tapped, but have reserve holes cast in (except 3/4" and 1" which are dimpled). Recommended tapping sizes are listed for reference only. PSG 1 KPG /4" - 2" 1 (38 ) 2 15 1 8 6 4 3 1342 268 25 2 15 1 5 46 134-2 5 1 15 2 25 3 35 4 45 5 (º) -29-18 1 38 66 93 121 149 177 24 232 26 (º) Saturated Steam MS 215/5/26 31/5/11
Series arbon Steel Sealwelded all Valves SS--2/SS-R-2 G SS--2 WOG 3 STM 316 SZ 1 LL 316 OY W ST RPT N SZ 1/4" - 2" G SS--2 WOG 2 STM 316 SZ 4 LL 316 OY W ST RPT N SZ 2-1/2" - 4" 74 L ull port NPT to NS 1.2.1 ull sealwelded 2 piece body lowout-proof stem nti-static device Locking device ctuator mounting pad 3 PS, W.O.G. 1 /4" to 2" 2 PS, W.O.G. 2 1 /2" to 4" omplies with N MR-13 N MR-175/SO 15156 * Optional 2" SS-R-2 large port 4.5 Seal Weld anti-static design ( 1 /4"& 3 /8") ( 1 /2" to 4") 1. andle / uctile ron 536 Grade 65-45-12 2. Retainer Spring / arbon Steel 3. Lockable Stop Plate / arbon Steel Plated 4. Stem earing / Nylon 5. Packing / Viton O-Rings (2) (3 for 3" & 4" sizes) 6. Thrust Washer / R-PT 15% Glass-illed 7. Stem / Stainless Steel 276 Type 316 8. Gasket / Viton O-Ring (1) 9. ap / ast Steel 216 W 1. Seat / R-PT 15% Glass-illed 11. all / Stainless Steel 351-8M (316) 12. ody / ast Steel 216 W 13. Spring & Pin / Stainless Steel 276 Type 34 14. Screw / arbon Steel 37 K (See Note) ** Mounting pads on 2" are tapped. ll others have reserve holes. Recommended tapping sizes listed in (K) are for reference only ( 1 /4" & 3 /8" are not provided with mounting pads). PSG 1 KPG /4" - 2" 3 2682 25 2 1 8 6 4 2 15 1 5 2 1 /2" - 4" 17225 134-2 5 1 15 2 25 3 35 4 45 5 (º) -29-18 1 38 66 93 121 149 177 24 232 26 (º) G SS-2 *SSR-2 size 8 1 15 2 25 32 4 5 65 8 1 5 mm/in 1 /4 3 /4 1 1 1 /4 1 1 /2 2 2 1 4 2 9.5 9.5 12.7 2. 24. 31.8 38.1 5. 65. 76. 1. 38.1 mm/in.374.374.5.787.945 1.252 1.5 1.969 2.559 2.992 3.937 1.5 3.3 3.3 35. 45. 48. 54.1 58. 64.5 81.9 87. 16. 57. mm/in 1.193 1.193 1.378 1.772 1.89 2.13 2.283 2.539 3.224 3.425 4.173 2.244 62. 62. 69. 85. 93. 15. 116. 128. 164. 175.5 211. 116. mm/in 2.441 2.441 2.717 3.346 3.661 4.134 4.567 5.39 6.457 6.99 8.37 4.567 51.5 51.5 54.5 64.3 67.4 75. 81. 93.4 114.8 128.15 14.7 86.5 mm/in 2.28 2.28 2.146 2.531 2.654 2.953 3.189 3.677 4.52 5.45 5.539 3.46 13. 13. 13. 16. 16. 23. 23. 231. 4. 4. 46. 23 mm/in 5.12 5.12 5.12 6.3 6.3 9.6 9.6 9.94 15.75 15.75 18.11 9.6 25.4 44.2 44.2 47.2 47.2 47.5 7. 7. 88.4 47.1 mm/in 1. 1.74 1.74 1.858 1.858 1.87 2.75 2.75 3.48 1.854 G 35. 41. 44. 54. 6. 74. 81. 92. 125. 6. mm/in 1.378 1.614 1.732 2.126 2.362 2.913 3.189 3.622 4.921 2.362 19. 25. 23.5 33.5 33.5 34.4 38.5 42.75 56.75 36.3 mm/in.748.984.925 1.319 1.319 1.354 1.516 1.683 2.234 1.429 5.9 5.9 5.9 8. 8. 12. 12. 12. 14. 14. 17. 12. mm/in.232.232.232.315.315.472.472.472.551.551.669.472 9.7 9.7 9.7 11.7 11.7 16.9 16.9 16.9 2.9 2.9 28.9 16.9 mm/in.382.382.382.461.461.665.665.665.823.823 1.138.665 **K M6 M6 M6 M8 M8 M8 M8 M8 M8 M8 V 11 11 15 45 65 125 175 38 5 9 125 18 Weights.354.346.53.94 1.35 2.39 2.98 4.38 8.96 1.95 19.8 2.98 kg / lb.779.761 1.166 2.68 2.97 5.258 6.556 9.656 19.712 24.14 43.65 6.556 MS 215/5/26 31/5/11 9/24/13
Series arbon Steel 3 Piece all Valves SS--3N 4.6 1 /4" to 1 1 /4" 1 1 /2" to 3" 3" 1WOG 696 ull port NPT threads to NS 1.2.1 Three piece body lowout-proof stem djustable packing nut Locking lever handle SO 5211 mounting pad loating ball omplies with N MR-13 N MR-175/SO 15156 2 PS, W.O.G. 1 /4" to 1" 15 PS, W.O.G. 1 1 /4" to 3" Ø size 8 1 15 2 25 32 4 5 65 8 mm/in 1 /4 3 /4 1 1 1 /4 1 1 /2 2 2 1 9.5 9.5 15. 2. 25. 32. 38. 5.5 65. 78. mm/in.374.374.591.787.984 1.26 1.496 1.988 2.559 3.71 67. 67. 68.5 75. 79. 88.5 94.5 17. 129.5 139.5 mm/in 2.638 2.638 2.697 2.953 3.11 3.484 3.72 4.213 5.98 5.492 6. 6. 7. 76. 92. 15. 12. 138. 17.5 191. mm/in 2.362 2.362 2.756 2.922 3.622 4.134 4.724 5.433 6.713 7.52 12. 12. 12. 139. 139. 193. 193. 193. 244. 244. mm/in 4.724 4.724 4.724 5.472 5.472 7.598 7.598 7.598 9.66 9.66 36. 36. 36. 42. 42. 5. 7. 7. 12. 12. mm/in 1.417 1.417 1.417 1.653 1.653 1.968 2.756 2.756 4.16 4.16 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 SO lg 3 3 3 4 4 5 7 7 1 1 11.5 12.5 14.5 18. 18. 23.5 22.5 25. 32.5 31. mm/in.453.492.571.79.79.925.886.984 1.28 1.22 5.5 5.5 5.5 6.5 6.5 8. 8. 1. 12. 12. mm/in.217.217.217.256.256.315.315.394.472.472 7.7 7.7 7.7 9.3 9.3 12.5 12.5 15.6 18.8 18.8 mm/in.33.33.33.367.367.492.492.614.74.74 V 1 1 26 5 68 12 17 36 51 9 Weights.434.42.62.91 1.19 1.93 2.78 4.75 8.63 13.46 kg / lb.955.924 1.364 2.2 2.618 4.246 6.116 1.45 18.986 29.612 1. andle Grip/ Vinyl 2. andle / Stainless Steel 276 Type 34 3. Locking evice / Stainless Steel 276 Type 34 4. andle Nut /Stainless Steel 276 Type 34 5. Stem Washer / Stainless Steel 276 Type 34 6. Gland Nut / arbon Steel 18 7. Packing / PT 8. Stem / Stainless Steel 276 Type 316m 9. Thrust Washer / R-PT 15% Glass-illed 1. Gasket / PT 11. ex Nut / arbon Steel 194 Grade 2M 12. olt / arbon Steel 193 Grade 7M 13. all / Stainless Steel 351-8M (316)m 14. ody / ast Steel 216 - W 15. Seat / R-PT 15% Glass-illed 16. ap / ast Steel 216 - W PSG KPG /4" - 1" 2 15 1 8 6 4 3 2 15 1 5 1 1 /4" - 3" 1342 268 134-2 5 1 15 2 25 3 35 4 45 5 (º) -29-18 1 38 66 93 121 149 177 24 232 26 (º) MS 215/5/26 31/5/11
Series arbon Steel 3 Piece all Valves SS--3N-SW 1 /4" to 1 1 /4" 1 1 /2" to 3" 3" 1WOG 696 G Ø ull port Socket Weld ends to NS 16.11 Three Piece body lowout-proof stem djustable packing nut Locking lever handle SO 5211 mounting pad omplies with N MR-13 N MR-175/SO 15156 loating ball 2 PS, W.O.G. 1 /4" to 1" 15 PS, W.O.G. 1 1 /4" to 3" SS--3N-W (butt-weld) available on request 1. andle Grip/ Vinyl 2. andle / Stainless Steel 276 Type 34 3. Locking evice / Stainless Steel 276 Type 34 4. andle Nut /Stainless Steel 276 Type 34 5. Stem Washer / Stainless Steel 276 Type 34 6. Gland Nut / arbon Steel 18 7. Packing / PT 8. Stem / Stainless Steel 276 Type 316m 9. Thrust Washer / R-PT 15% Glass-illed 1. Gasket / PT 11. ex Nut / arbon Steel 194 Grade 2M 12. olt / arbon Steel 193 Grade 7M 13. all / Stainless Steel 351-8M (316)m 14. ody / ast Steel 216 - W 15. Seat / R-PT 15% Glass-illed 16. ap / ast Steel 216 - W 4.7 PSG KPG /4" - 1" 2 15 1 8 6 4 3 2 15 1 5 1 1 /4" - 3" 1342 268 134-2 5 1 15 2 25 3 35 4 45 5 (º) -29-18 1 38 66 93 121 149 177 24 232 26 (º) MS 215/5/26 31/5/11 size 8 1 15 2 25 32 4 5 65 8 mm/in 1 /4 3 /4 1 1 1 /4 1 1 /2 2 2 1 9.5 9.5 15. 2. 25. 32. 38. 5.5 65. 78. mm/in.374.374.591.787.984 1.26 1.496 1.988 2.559 3.71 67. 67. 68.5 75. 79. 88.5 94.5 17. 129.5 139.5 mm/in 2.638 2.638 2.697 2.953 3.11 3.484 3.72 4.213 5.98 5.492 6. 6. 7. 76. 92. 15. 12. 138. 17.5 191. mm/in 2.362 2.362 2.756 2.922 3.622 4.134 4.724 5.433 6.713 7.52 12. 12. 12. 139. 139. 193. 193. 193. 244. 244. mm/in 4.724 4.724 4.724 5.472 5.472 7.598 7.598 7.598 9.66 9.66 36. 36. 36. 42. 42. 5. 7. 7. 12. 12. mm/in 1.417 1.417 1.417 1.653 1.653 1.968 2.756 2.756 4.16 4.16 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 SO lg 3 3 3 4 4 5 7 7 1 1 G 14.2 17.6 21.7 27.1 33.8 42.6 48.7 61. 73.8 9. mm/in.559.693.854 1.67 1.33 1.677 1.917 2.42 2.96 3.543 11.5 12.5 14.5 18. 18. 23.5 22.5 25. 32.5 31. mm/in.453.492.571.79.79.925.886.984 1.28 1.22 5.5 5.5 5.5 6.5 6.5 8. 8. 1. 12. 12. mm/in.217.217.217.256.256.315.315.394.472.472 7.7 7.7 7.7 9.3 9.3 12.5 12.5 15.6 18.8 18.8 mm/in.33.33.33.367.3.67.492.492.614.74.74 Weights.415.4.6.88 1.15 1.87 2.67 4.62 8.25 13. kg / lb.913.88 1.32 1.936 2.53 4.114 5.874 1.164 18.15 28.6 V 1 1 26 5 68 12 17 36 51 9
SS--3--S WOG 3 16.34LT SO-T 15@2 / 93 OY W TRM 316 SLS GR ST RPT N N Series arbon Steel 3 Piece P 67 all Valves 4.8 18 1 18 SS--3--S WOG 3 16.34LT SO-T 25 @ 46 / 27 OY W TRM 316 SLS GR ST R-PT N SZ 1/4" - 1" SS--3--S WOG 1 16.34LT SO-T 25 @ 46 / 27 OY W TRM 316 SLS GR ST R-PT N SZ 2-1/2" - 3" 18 SS--3--S WOG 2 16.34LT SO-T 25 @ 46 / 27 OY W TRM 316 SLS GR ST R-PT N SZ 1-1/4" - 2" 7.6 Ø 21 SS--3--S SS--3--S Three piece body / ull port NPT threads to NS 1.2.1 nti-static design lowout proof stem djustable live loading packing nut Positive lock-out device SO 5211 mounting pad omplies with N MR-13 N MR-175/SO 15156 ire-safe certified to P-67 5 th edition 25 PSG steam rated 3 P.S.. W.O.G. (15 class) 1 /4" to 1" 2 P.S.. W.O.G. (9 class) 1-1 /4" to 2" 1 P.S.. W.O.G. (6 class) 2-1 /2" to 3" 1. andle Grip/ Vinyl 2. andle / Stainless Steel 276 Type 34 3. andle Nut / Stainless Steel 276 Type 34 4. andle Washer / Stainless Steel 276 Type 34 5. Lock-Out Plate / Stainless Steel 276 Type 34 6. Gland Nut / Stainless Steel 276 Type 34 7. Lock Washer / Stainless Steel 276 Type 34 8. elleville Washer / Stainless Steel 31 9. Gland / Stainless Steel 276 Type 34 1. Packing / Graphite 11. Stem / Stainless Steel 276 Type 316m 12. Thrust Washer / R-PT (TM4215) 13. Gasket / Graphite + Stainless Steel 34 Socketweld ends available 14. ex Nut / 194 grade 2M 15. Stud olt / 193 grade 7M 16. all / Stainless Steel 351 8M (316)m 17. ody / ast Steel 216 W 18. Seat / R-PT (TM4215) 19. ap / Stainless Steel 216 W size 8 1 15 2 25 32 4 5 65 8 2. Spring & Pin / 276 Type 34 mm/in 1 /4 3 /4 1 1 1 /4 1 1 /2 2 2 1 1. 1. 15. 2. 25. 32. 38. 5. 65. 78. 21. Stopper /.S. Plated mm/in.37.37.5.75 1. 1.25 1.5 2. 2.5 3. 65.8 65.8 68.5 75. 79. 88.5 94.5 17. 129.5 139.5 PSG 1 KPG mm/in 2.59 2.59 2.7 2.95 3.11 3.48 3.72 4.21 5.1 5.49 /4" - 1" 3 2682 64.5 64.5 68.5 8.5 91.5 1.5 117. 133.5 157.8 178. mm/in 2.54 2.54 2.7 3.17 3.6 3.96 4.61 5.26 6.21 7.1 25 17225 1 1 /4" - 2" 12. 12. 12. 139. 139. 193. 193. 193. 244. 244. 2 mm/in 4.72 4.72 4.72 5.47 5.47 7.6 7.6 7.6 9.61 9.61 15 1342 36. 36. 36. 42. 42. 5. 7. 7. 12. 12. 2 1 /2" - 3" 1 mm/in 1.417 1.417 1.417 1.654 1.654 1.969 2.756 2.756 4.16 4.16 M6 M6 M6 M6 M6 M8 M8 M8 M8 M8 8 SO lg 3 3 3 4 4 5 7 7 1 1 6 15.5 15.5 15.5 18.5 18.5 23.5 23.5 27. 3. 3. 4 mm/in.61.61.61.73.73.93.93 1.6 1.18 1.18 3 268 5.5 5.5 5.5 6.5 6.5 8. 8. 1. 12. 12. 25 2 mm/in.22.22.22.26.26.32.32.39.47.47 8.1 8.1 8.1 9.6 9.6 12.8 12.8 16.1 19.25 19.25 15 134 mm/in.32.32.32.38.38.5.5.63.76.76 1 V 11 11 26 5 68 12 17 36 51 9 5 Weights.68.68.82 1.35 1.82 2.81 4.64 7.64 1.77 15.7 48 kg / lb 1.499 1.499 1.88 2.976 4.12 6.195 1.229 16.843 23.744 34.612-2 5 1 15 2 25 3 35 4 45 5 (º) Valves comply to 16.34 lass 6, 9 & 15 wall thickness. -29-18 1 38 66 93 121 149 177 24 232 26 (º) MS 215/5/26 31/5/11 Saturated Steam