We Compound your Solutions Automotive presentation vers6. 2006/05-1
Company presentation Automotive Market We Compound your Solutions Automotive presentation vers6. 2006/05-2
Multibase group Manufacturing Locations : Saint-Laurent-du-Pont, France Copley, Ohio, USA Daman/Mumbai, India Turnover : Employees : >230 >$100 million Serving customers in 50 countries We Compound your Solutions Automotive presentation vers6. 2006/05-3
Multibase World Locations St. Laurent, France Copley, Ohio - USA Daman, Mumbai - India We Compound your Solutions Automotive presentation vers6. 2006/05-4
Multibase World Locations St Laurent du Pont - France Americas Center of Excellence Multibase Inc. 3835 Copley Road Copley, OH 44321 USA Tel: +1 330 867 5124 Fax: +1 330 666 7419 European Center of Excellence Multibase SA Z. I. Chartreuse Guiers 38380 Saint Laurent du Pont Tel: +33 (0)4 76 67 12 12 Fax: +33 (0)4 76 67 12 82 Copley, OH - USA Asian Center of Excellence Synergy Multibase Ltd. 74/5-6 Daman Industrial Estate Kadaiya Village Nani Daman Daman 396 210 (U.T.) India Tel: +91-260-2220627 Fax: +91-260-2221578 Daman, Mumbai - India We Compound your Solutions Automotive presentation vers6. 2006/05-5
Quality Registrations ISO 9001 : 2000 Daman Copley St Laurent du Pont ISO TS16949 St Laurent du Pont ISO CEI 17025 Copley NF EN ISO 14001 : 2004 St Laurent du Pont We Compound your Solutions Automotive presentation vers6. 2006/05-6
Automotive Market Aesthetics : Interior Soft parts Interior / Exterior rigid parts Trim part lips Interior skins Weather insulation : Encapsulation Glazing systems Body seals Thermal Insulation Air flaps, vibration dampening support Safety Frontal protection Side protection Fluid transportation Hoses We Compound your Solutions Automotive presentation vers6. 2006/05-7
AESTHETICS : Interior Soft Parts We Compound your Solutions Automotive presentation vers6. 2006/05-8
Interior Soft Parts: Recommendations : Process : Injection Specifications : Aesthetical and scratch resistant Compatibility : PP or ABS/PC Colored and soft touch UV Stabilization Good flow Proposal : G standard : 45 A 90 A A 1006 : 65 A We Compound your Solutions Automotive presentation vers6. 2006/05-9
Interior Soft Parts: OEM RENAULT VOLVO MITSUBISHI MERCEDES Applications Air flap knob Climate control knob Door handle Seat belt housing Hand brake handle Hand brake handle Cup holder Product A 1006 65A G 92 A 510 G 92 A 510 G 45 A 612 G 92 A 510 G 92 A 510 G 60 A 612 We Compound your Solutions Automotive presentation vers6. 2006/05-10
Interior Soft Parts Recommendations : Process : Injection Specifications : Colored UV Stabilization Good flow Fogging Appearance Proposal : G standard : 60 A 90 A DASHBOARD MAT We Compound your Solutions Automotive presentation vers6. 2006/05-11
Dashboard mat : OEM RENAULT PEUGEOT CITROEN MERCEDES Product G 62 A 510 G 90 A 512 G 60 A 510 G 60 A 610 We Compound your Solutions Automotive presentation vers6. 2006/05-12
AESTHETICS : Interior/Exterior Rigid Parts Roof profile We Compound your Solutions Automotive presentation vers6. 2006/05-13
Roof profile : Recommendations : Process : Extrusion Specifications : Scratch resistance Appearance Low gloss Good DRC for the seal UV Stabilization Proposal : Skin : G or ER 90 A or 40 D Seal : GT 60 A or 70 A 4 Dilatation 1 The Skin : Appearance Scratch resistance Stabilization UV Low Gloss 3 Seal : DRC for the gasket with the Door if it s necessary 2 Heart of Profil : Rigid PP We Compound your Solutions Automotive presentation vers6. 2006/05-14
Roof profile: OEM SEAT Product ER 90A 520 + G 60A 21 BT G 60A 21 BT TOYOTA G 75A 520 G 75A 520 We Compound your Solutions Automotive presentation vers6. 2006/05-15
AESTHETICS - Trim Part Lips Cowl screen seal Exterior/Interior pillar trim We Compound your Solutions Automotive presentation vers6. 2006/05-16
Trim Parts Lips : Cowl Screen Seal Recommendations : Process : Injection Specifications : Compatibility : PP Exterior UV stabilization Colored DRC if necessary Good flow Proposal : G standard GT (low compression set) : 60 A, 75 A, 90 A : 60 A, 70 A We Compound your Solutions Automotive presentation vers6. 2006/05-17
Cowl Screen Seal by OEM : OEM Renault Peugeot Citroën Toyota Product G 90 A 520 N0200 G 75 A 520 205/09 G 75 A 520 205/09 G 75 A 520 FXT G 75 A 520 FXT G 75 A 520 205/09 G 60 A 520 N0200 We Compound your Solutions Automotive presentation vers6. 2006/05-18
Exterior/Interior Pillar Trim : Recommendations : Process : Injection Specifications : Compatibility : PP Excellent UV stabilization for interior or exterior Colored Aesthetical Good flow Scratch resistance Proposal : G standard : 60 A, 75 A, 90 A We Compound your Solutions Automotive presentation vers6. 2006/05-19
Exterior/Interior Pillar Trim by OEM Compatibility : PP OEM RENAULT PSA Application EXTERIOR EXTERIOR EXTERIOR EXTERIOR EXTERIOR EXTERIOR Product G 70 A 521 205/09 G 75 A 520 205/09 G 90 A 522 205/09 G 60 A 520 FXT TES A6507 EV0 FXT TES A6507 EV0 FXT We Compound your Solutions Automotive presentation vers6. 2006/05-20
Exterior Pillar Trim : Recommendations : Process : Injection Specifications : Compatibility : ABS, ASA, PC Exterior UV stabilization Colored Aesthetical Proposal : A 1004 : 65 A We Compound your Solutions Automotive presentation vers6. 2006/05-21
Exterior Pillar Trim Compatibility : ABS,ASA,PC OEM VW PSA Product A 1004 65A N0200 A 1004 65A FXT We Compound your Solutions Automotive presentation vers6. 2006/05-22
AESTHETICS : Interior skins We Compound your Solutions Automotive presentation vers6. 2006/05-23
Skin Vacuum Forming Recommendations : Process : Extrusion + Vacuum forming Specifications : Scratch Resistance by coating Colored Stabilization Easy processing by vacuum forming Proposal : G specific for CHOMARAT : TEO by DDE Technology : 35 D 35 D We Compound your Solutions Automotive presentation vers6. 2006/05-24
Skin by injection : Recommendations : Process : Sandwich injection molding Specifications : Scratch resistance Colored Stabilization UV Compatibility with the core material (mainly PP) Very good flow Proposal : G standard : 90 A We Compound your Solutions Automotive presentation vers6. 2006/05-25
Door Panel Skin : OEM RENAULT FIAT Product TES D3502 KU1 NAT G 90 A 512 813 N0176 We Compound your Solutions Automotive presentation vers6. 2006/05-26
Weather Insulation We Compound your Solutions Automotive presentation vers6. 2006/05-27
Weather & Thermal Insulation Encapsulation : 1. Fixed glazing seals 2. Engineered Plastics (ABS, PC, ASA) We Compound your Solutions Automotive presentation vers6. 2006/05-28
1- Fixed Glazing seals We Compound your Solutions Automotive presentation vers6. 2006/05-29
Introduction: Several processes compete in the glazing seal sector. These include: Mechanical seals ( rubber bands ) in which a continuous seal is stretched to fit over the glazing or stuck prior to installation Windshields and backlights EPDM, TPE Encapsulation where glass is placed into a mould and material is injected onto and around it (Low pressure injection) Rear/Front quarter windows PU-RIM, PVC, EPDM, TPE Robotic extrusion in which a robot deposits a profile on the glass (St Gobain process) Windshields and backlights Air-cured PU, TPE We Compound your Solutions Automotive presentation vers6. 2006/05-30
Encapsulation : Materials PVC EPDM Aromatic PU Aliphatic PU TPV SEBS Key Benefits Lowest cost Fast cycle Sealing (Low CS) Low pressure (large parts) Weather resistant Low pressure (large parts) Processability Compatibly with polyolefin CS Colorability Processability High flow Compatibly with polyolefin Limitations High injection pressure (no large parts No compatibility with polyolefin Density ELV legislation High raw materials cost Long cycle High molding pressure (no large parts) No colors Requires in mold coating High cost Flow We Compound your Solutions Automotive presentation vers6. 2006/05-31
Encapsulation: Applications MULTIFLEX TES A6509 EV0 BLK Encapsulation Front quarter window Vehicle: A7 (PSA 207) Product features: 65 A Hardness Excellent UV Stabilization (meets D27 1389 and D47 1431 norms) Very high Fluidity (low pressure injection) Aesthetics Low odor level We Compound your Solutions Automotive presentation vers6. 2006/05-32
Encapsulation: Applications MULTIFLEX G 50 A 21 BT Mechanical seal Backlight Vehicle: A6 (PSA C2) Product features: 50 A Hardness Excellent Compression Set Extrudability Compatibly with foamed adhesive We Compound your Solutions Automotive presentation vers6. 2006/05-33
2. Engineered Plastics (ABS,PC,ASA) We Compound your Solutions Automotive presentation vers6. 2006/05-34
Encapsulation on engineered plastics (ABS,PC,ASA) Recommendations : Process : Low pressure injection Specifications : Chemical bonding with rigid support (mainly ABS) Exterior UV stabilization Proposal : A 1004 : 65 A We Compound your Solutions Automotive presentation vers6. 2006/05-35
Encapsulation on engineered plastics (ABS,PC,ASA) OEM CITROEN RENAULT Product A 1004 65A 520 We Compound your Solutions Automotive presentation vers6. 2006/05-36
WEATHER INSULATION : Glazing Systems In development We Compound your Solutions Automotive presentation vers6. 2006/05-37
WEATHER INSULATION : Body seals Recommendations : Process : Injection Specifications : Compatibility : Rubber Good UV stabilization Proposal : G 62 A 21 B Z 1631 N0052 We Compound your Solutions Automotive presentation vers6. 2006/05-38
WEATHER INSULATION : Body seals OEM RENAULT Product G 62 A 21 B Z 1631 N0052 We Compound your Solutions Automotive presentation vers6. 2006/05-39
WEATHER INSULATION : Others BOX SEALING We Compound your Solutions Automotive presentation vers6. 2006/05-40
Box sealing : Recommendations : Process : Injection Specifications : Natural color for quality inspection Low hardness : < 45 A DRC Good flow Mechanical bonding with rigid box (mainly PA) Proposal : GT (low compression set) : G standard : 25 A 40 A We Compound your Solutions Automotive presentation vers6. 2006/05-41
Box sealing : OEM or Tiers1 Meritor Application Connecting box Product GT 25 A 510 NAT 14787 G 40 A 11 Z 1052 PSA MERCEDES Loudspeaker box Pollen filter cover Battery cover GT 25 A 510 NAT 14787 GT 25 A 510 14787 GT 25 A 510 N0200 14084 We Compound your Solutions Automotive presentation vers6. 2006/05-42
Thermal Insulation Air Flaps, vibration dampening support We Compound your Solutions Automotive presentation vers6. 2006/05-43
Air Flap, vibration dampening support : Recommendations : Process : Injection Specifications : Compatibility : PP Heat ageing (until 700 hours at 150 C) Low compression set Low odor Fogging Hardness : 25 A 60 A Proposal : G standard : GT (Low Compression Set) : 45 A, 60 A 25 A, 40 A, 50 A, 60 A We Compound your Solutions Automotive presentation vers6. 2006/05-44
Air Flap, vibration dampening support : OEM VOLKSWAGEN BMW RENAULT/PSA/OPEL DIVERS Product GT 40 A 450 NAT 18553 GT 25 A 510 N0200 14084 G 62 A 21 B Z1631 F664168S G 40 A 21 BT Z 2811 N0081 F664632X GT 25 A 510 N0200 N100678P G 60 A 11 B 14167 G 70 A 11 B Z1640 G 50 A 21 BT N0200 13025 GT 25 A 510 NAT 14787 G 62 A 21 B Z 1631 N0052 We Compound your Solutions Automotive presentation vers6. 2006/05-45
SAFETY : Frontal and Side protection Driver and passenger airbags Side airbags We Compound your Solutions Automotive presentation vers6. 2006/05-46
MULTIFLEX TPO (D1047) Advantages : Materials developed for Airbag cover market Low density Wide range of hardness Good low temperature behavior (down to -30 C) Excellent high temperature behavior Excellent durability Mold-in-color possibilities Drawbacks : Limitations at -35 C We Compound your Solutions Automotive presentation vers6. 2006/05-47
MULTIFLEX TEO/TES Advantages : Materials for Airbag cover market : Excellent process ability Low density Wide range of hardness Excellent impact resistance at low temperature (down to -45 C/-50 C)) Excellent impact resistance at high temperature (up to 90 C) Excellent durability TES also suitable for DAB molded in color Drawbacks : Limitations for mold-in-color for TEO We Compound your Solutions Automotive presentation vers6. 2006/05-48
2 Shot Airbag cover (2K) painted OEM Airbag Type Airbag Technology Paint Material Peugeot Driver 2K D1047 13718/G 60 A 530 Renault Driver 2K D1047 13718/G 60 A 530 BMW Driver 2K D1047 14688/G 60 A 530 Porsche Driver 2K D1047 14688/G 60 A 530 Rover Driver 2K D1047 14688/RP 6568J Land Rover Driver 2K D1047 14688/G60 A 530 Ford Driver 2K D1047 13718/G 60 A 530 Volvo Driver 2K D1047 14688/G 60 A 530 We Compound your Solutions Automotive presentation vers6. 2006/05-49
1 Shot Airbag cover () painted OEM Airbag Type Airbag Technology Paint Material Fiat Passenger D1047 14688 Passenger D1047 Colors Side D1047 MR Colors Driver TPO 3202 ST2 Black Alfa Driver D1047 14688 Peugeot Driver D1047 14688 Passenger D1047 14688 Passenger D1047 Colors Citroën Driver D1047 14688 Passenger D1047 14688 We Compound your Solutions Automotive presentation vers6. 2006/05-50
1 Shot Airbag cover () painted OEM Airbag Type Airbag Technology Paint Material Renault Driver D1047 Colors Driver D1047 14688 Passenger D 1047 14688 Driver TE0 3503 BLACK Opel Passenger A 9702 MR Porsche Side D1048 18336 Land Rover Passenger D1047 13718 Ford Passenger A 9702 MR Toyota Driver A 9702 MR Seat Driver D1048 18336 Nissan Driver D1047 14688 Driver TE0 3503 BLACK Mitsubishi Driver D1048 18336 We Compound your Solutions Automotive presentation vers6. 2006/05-51
1 Shot Airbag cover () unpainted OEM Airbag Type Airbag Technology Paint Material Fiat Driver no D1047 MR Colors Side no D1047 MR Colors Alfa Side no D1047 14689 Peugeot Passenger no D1047 MR Side no D1047 MR Side no D1047 MR Colors Knee no D1047 MR Colors Citroën Passenger no D1047 MR Side no D1047 MR VW Passenger Covered D 1047 14688 We Compound your Solutions Automotive presentation vers6. 2006/05-52
1 Shot Airbag cover () unpainted OEM Airbag Type Airbag Technology Paint Product Audi Passenger Covered D1048 18336 Opel Curtain Covered D5304 Side no D1047 MR BMW Passenger Covered D1048 18336 Toyota Driver no A 9702 MR Colors Seat Passenger Covered D1048 18336 Mitsubishi Side no D1047 MR We Compound your Solutions Automotive presentation vers6. 2006/05-53
FLUID TRANSPORTATION Hoses We Compound your Solutions Automotive presentation vers6. 2006/05-54
Fluid Transportation : Hoses Recommendations : Process : Extrusion Specifications : Heat stabilization Hardness : 60 to 75 A Chemical resistance Bursting resistance Proposal : G standard : 60 A G (low compression set) : 70 A C standard : 75 A We Compound your Solutions Automotive presentation vers6. 2006/05-55
Fluid Transportation : Hoses OEM Application Product RENAULT PSA Windscreen Washer Pipe Fuel line cover Windscreen Washer Pipe Fuel line cover Cowl plenum C 75 A 550 BK0200 12496 G 62 A 21 B Z 5219 N0200 G 70 A 21 BT Z4238 N0111 G 62 A 21 B Z5219 N0200 G 70 A 21 BT Z4238 N0111 G 75 A 21 B Z 1629 N0051 We Compound your Solutions Automotive presentation vers6. 2006/05-56