General Specifications (Type D) Light Fixture (2 units of GS-LED-260-30W) Luminaire input voltage Power consumption Lumen Color temperature IES lighting type Material 12 V 30 W 2892 lumens 4300~6200 K Type II Die-cast aluminum Solar Panel(2 units) Rating Power Maximum Power Voltage Maximum Power Current Open Circuit Voltage Short Circuit Current Size Weight 150 W 18.72 V 8.01 A 22.4 V 8.61 A 58.5ʺ x 27ʺ 39.5 lb Battery(2 units) Battery type Operating voltage Capacity Dimensions Expected life GEL Deep cycle lead-acid 12 V 120 Ah at 20 hr-rate to 1.75 V per cell at 77 F 16(L) 7(W) 9.2(H) (in) 5 ~ 7 years Solar Charger Operating Voltage Max. charge/ load current Night/day detection IP class 12 V/24 V auto recognition 5 A/ 10 A/ 20 A (different models) 2.5 V 10 V IP68 Pole Height Diameter Thickness Material Finishing 20 ft. 6 3/4 at the bottom, 4 at the top 5/32 Galvanized steel Powder coating www.streetlights-solar.com
Technology and Design Solar Duration We use NASA data to calculate average and minimum solar radiation. Latitude We tilt the solar panel to maximize exposure and capture more energy. Season Variation We take into consideration seasonal differences. Our lights are designed to work during the stormy winters as well as balmy summers. Weather Our lights work through rain, snow, fog, and cloudy weather. Dust Our lights are dust resistant. This would minimize your maintenance costs in dusty areas. Wind Speed We design the foundations and poles to withstand hurricanes and tropical storms. Temperature Our lights are designed to operate at 0F to 140F. Humidity We use waterproof controller, connector and battery box to ensure our lights operate even in the most humid conditions. www.streetlights-solar.com
GS-LED-260 (20W/30W/40W) Housing Manufactured according to IEC60598-1:2003 Unique design for better removal of dirt and self-cleaning Advanced thermal management to maximize performance 1W optical module Cree LED with individual lenses Electrostatic powder-coated surface for corrosion-resistance and long life Glass lens for superior performance Suitable for 1-2 lane roads and pathways Easy tool-less access into the luminaire Reduced maintenance Anodized aluminum reflector Die-cast aluminum housing Optimized roadway distribution www.streetlights-solar.com
Photometric results* (a): mounting height of the fixture : 17 (b): Pole height: 20 (c): Arm length: 4 (d): Pole to roadway distance: 3 Roadway width: 23 (2 lanes) Spacing between the poles Average illuminance (fc) Greenshine s Fixture IESNA recommendation** Greenshine s Fixture Uniformity (Avg/Min) IESNA recommendation** 60 0.65 0.3-0.8 1.6/1 6/1 80 0.49 0.3-0.8 1.63/1 6/1 100 0.38 0.3-0.8 2.37/1 6/1 * Results shown are for the GS-LED-260 running at 30W ** IESNA recommendation for local road type www.streetlights-solar.com
Specifications Luminaire input voltage Power consumption Lumen output LED type Color temperature IES lighting type Material Lens IP class Insulation Operating temperature CRI DC 12V/24V 20W/30W/40W 1938/2892/3946 lumens CREE XPG, >130 lm/w ~6200K Type II High pressure die-cast aluminum 5mm toughened glass, optical grade PMMA IP 65 Class I -30 C ~+50 C/ -22 F ~+122 F 70 Weight: 8.3 kg/ 18.3 lb. Dimensions: * Contact us for more details and options www.streetlights-solar.com
150W Mono Crystalline solar cells Aluminum frame with a unique design to withstand strong winds Highly resistant tempered glass Multilayer EVA encapsulation with triple layer back sheet 25 year power output warranty: 5 years/95%, 12 years/90%, 25 years/80%. Rating Power 150W Production Tolerance ± 3% Maximum Power Voltage Maximum Power Current 18.72V 8.01A Open Circuit Voltage 22.4V Short Circuit Current 8.61A The picture is for reference only! Frame Size Weight Anodized aluminum, 4mm thickness 1486mm x 682mm / 58.5ʺ x 27ʺ 18Kg / 39.5lb Test Temperature 25 C / 77 F Type of Output IP65 Junction box with 900mm cable www.streetlamp-solar.com
12V 120Ah GEL deep cycle battery with a 12 years floating design life is especially designed for frequent cyclic discharge under extreme temperature. Cells Per Unit 6 Voltage Per Unit Capacity 12V 120Ah at 20hr-rate to 1.75V per cell at 25 C/ 77 F Weight Max. Discharge Current Internal Resistance Operating Temperature Range 38 kg/ 84 lb. 1200 A (5 sec) Approx. 5.5 mω Discharge: -40 C ~60 C/ -40 F ~140 F Charge: -20 C~50 C/ -4 F~122 F Storage: -40 C~60 C/ -40 F~140 F Normal Operating Temperature Range 25 C±5 C/ 77 F±41 F Float charging Voltage 13.6 to 13.8 VDC/ unit average at 25 C/ 77 F Recommended Max Charging Current Limit 36A Equalization and Cycle Service 14.6 to 14.8 VDC/unit Average at 25 C/ 77 F Self Discharge Valve Regulated Lead Acid can be stored for more than 6 months at 25 C/ 77 F. Self-discharge ratio less than 3% per month at 25 C/ 77 F. Please charge batteries before using. Terminal Size Terminal F5/F12 406(L) 173(W) 233(H) (mm) 16(L) 7(W) 9.2(H) (in) www.streetlamp-solar.com
www.streetlamp-solar.com
Features GS-LED-CTRL Corrosion-proof epoxy-encapsulated PCB (IP68) Four-stage battery charging (main, float, boost, equalization) Temperature compensated Automatic system voltage recognition (12V/24V) Customized by Greenshine to fit specific needs of clients Easy to installed Specification System voltage Max. charge/ load current 12V/24V auto recognition 5A/ 10A/ 20A (different models) Deep discharge protection: Cut-off voltage Reconnect level Overvoltage protection Undervoltage protection Max. panel voltage Temperature compensation (Charge voltage) Ambient temperature Max. altitude Battery type 11V 12V/ 22V 24V 12.8V/25.6V 15.5V/31.0V 10.5V/21V UBATmin + 30V (if module and battery are connected with correct polarity) 25mV/K at 12V 50mV/K at 24V 40 C to +60 C, 40 F to +140 F 4,000m above sea level Lead acid (GEL, AGM, flooded) Adjustment range: Evening/morning hours Night/day detection Wire cross section Type of protection 0 15h/ 0 14h 2.5V 10V 1.5mm 2 / 1.5mm 2 / 2.5mm 2, 15 (AWG) IP68 (1.5 m, 72 h) www.streetlights-solar.com