Sensor Accessories.2 Product Description Mounting brackets by Eaton s electrical sector found in this section are suited for use with 8 mm to 30 mm diameter tubular sensors only. Mounting brackets designed to specifically fit other types of sensors are found in the respective Accessories sections for those sensor families. For the most current information on this product, visit our web site: www.eaton.com Product Selection Guide When choosing a bracket, consider: Adjustability Do you need minimal alignment capability (mounting an inductive proximity sensor), or a high level of alignment precision (mounting a long range photoelectric thru-beam sensor)? Material of Construction This can be dictated by the sensing environment or the type of sensor you are using. Contents Description Page Product Selection.............................. 418 Dimensions.................................. 420 For Customer Service in the U.S. call 1-877-ETN CARE (386-2273), in Canada call 1-800-268-3578. For Application Assistance in the U.S. and Canada call 1-800-426-9184. Volume 8 Sensing Solutions CA08100010E February 2011 www.eaton.com 417 For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616
.2 Sensor Accessories Product Selection L-Shaped Bracket L-Shaped Bracket L-Shaped Bracket L-Shaped Bracket with Slot Flat Bracket Adjustable Bracket Mounting Brackets for Tubular Sensors Description L-Shaped Bracket E57KM_ L-Shaped Bracket 6161A_ L-Shaped Bracket 6167A L-Shaped Bracket with Slot Flat Bracket Adjustable Bracket E58KAM18_ Dimensions, see Page 420. Notes Allows some adjustment in two axes Sensor mounts with two jam nuts and washers Stainless steel One per package Allows some adjustment in one axis and allows for aiming of the sensor through a short arc Sensor mounts with two jam nuts and washers Aluminum with chromate finish Two per package Same as 6161A-6501 (above), except: Bulk packaged (ordered quantity will be sent bulk packed) Allows a minimum range. Suitable for 30 mm sensors. Allows some adjustment in one axis Sensor mounts with two jam nuts Zinc dichromate One per package Allows some adjustment in one axis and allows for aiming of the sensor through a short arc Sensor mounts with two jam nuts and washers Aluminum with chromate finish Bulk packaged (ordered quantity will be sent bulk packed) Allows some adjustment in one axis and allows for aiming of the sensor through a short arc Sensor mounts with two jam nuts and washers Aluminum with chromate finish Bulk packaged (ordered quantity will be sent bulk packed) Locking vertical and horizontal adjustments for independent adjustments in each axis Sensor mounts with two jam nuts and washers 304 stainless steel One per package Same as E58KAM18, except not electrically isolated from mounting surface Included with sensor. Allows installation of sensor with jam nuts already in place on sensor body, (Comet and Prism sensors only). Sensor is electrically isolated from mounting surface. Size Catalog Number 8 mm E57KM8 12 mm E57KM12 18 mm E57KM18 30 mm E57KM30 18 mm 6161A-6501 18 mm 6161AS6501 30 mm 6167A-6501 18 mm 6161AS7050 18 mm 6161AS95 18 mm E58KAM18 18 mm E58KAM18U 418 Volume 8 Sensing Solutions CA08100010E February 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616
Sensor Accessories.2 Adjustable Bracket Mounting Brackets for Tubular Sensors, continued Description Adjustable Bracket E58KAM30_ Size Catalog Number 18 mm Ball Swivel Bracket 18 mm Ball Swivel Bracket Locking vertical and horizontal adjustments for independent adjustment in each axis Sensor mounts with two jam nuts 304 stainless steel One per package Same as E58KAM30, except not electrically isolated from mounting surface. Allows 360 rotation and 10 vertical tilt Mounts directly to any 18 mm threaded sensor 5% glass filled Valox One per package 30 mm E58KAM30 30 mm E58KAM30U 18 mm E58KAM18B Metal Ball Swivel Mount Metal Ball Swivel Mount Allows 5.5 rotation with screw lock to fix final position Mounts directly to any18 mm tubular sensor Extremely rugged, made from zinc plated steel/celenex One per package 0.75 in (18 mm) 6168A-6501 Plastic Ball Swivel Mount Plastic Ball Swivel Mount Plastic Ball Swivel Mount 6143A Operating temperature: Plastic Ball Swivel Mount 6142A Allows 10 rotation on X and Y axes with a clamping action to hold adjustment Mounts directly to any 8 mm tubular sensor Noryl 40 to 160 F ( 40 to 71 C) One per package Same as 6143A-6501 (above), except: Mounts directly to any 18 mm tubular sensor 0.375 in (8 mm) 0.75 in (18 mm) 6143A-6501 6142A-6501 Cushioned Sensor Mounts Cushioned Sensor Mounts Precision machined, spring-loaded sleeves that hold tubular sensors to protect them from accidental impact due to overtravel of the target being sensed. Used for inductive proximity sensors only. 8 mm E57KNZ8 12 mm E57KNZ12 18 mm E57KNZ18 30 mm E57KNZ30 Dimensions, see Page 420. Notes Sensor is electrically isolated from mounting surface. Included with sensor. Electrically isolates the sensor to prevent noise pick-up caused by poor grounding. Avoid exposing to chlorinated halogenated or aromatic hydrocarbons Volume 8 Sensing Solutions CA08100010E February 2011 www.eaton.com 419 For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616
.2 Sensor Accessories Dimensions Approximate Dimensions in Inches (mm) for Tubular Sensors L-Shaped Bracket E57KM_ Size A B C D 8 mm 3.00 (76) 1.35 (34) 1.125 (29) 0.65 (17) 12 mm 3.00 (76) 1.35 (34) 1.125 (29) 0.65 (17) 18 mm 3.00 (76) 1.35 (34) 1.125 (29) 0.65 (17) 30 mm 4.25 (108) 2.15 (55) 1.75 (45) 1.00 (25) E F G H 8 mm 1.20 (31) 0.75 (19) 0.323 (8) 0.218 (6) 12 mm 1.20 (31) 0.75 (19) 0.484 (12) 0.218 (6) 18 mm 1.20 (31) 0.75 (19) 0.718 (18) 0.218 (6) 30 mm 2.00 (51) 1.25 (29) 1.203 (30) 0.281 (7) L-Shaped Bracket 6161A_ 1.50 0.75 (19) 1.75 (44) 1.00 (25) ø 0.75 (19) 0.35 (9) 0.31 (8) 0.62 (16) ø 0.28 (7) 0.31 (8) 1.50 L-Shaped Bracket 6167A_ 3.0 (76.2) 2.70 (68.6) L-Shaped Bracket with Slot 1.50 Flat Bracket 1.50 ø 0.75 (19) 0.75 (19) 0.75 (19) 2.50 (63.5) 0.25 Rad. (6.3) 1.35 (34.3) 0.99 (25.1) 1.75 (44) 1.00 (25) 0.17 Rad. (4.3) 1.01 1.0 (25.6) (25.4) 1.20 Dia. (30.5) 1.0 (25.4) 1.0 (25.4) ø 0.75 (19) 0.35 (9) 0.31 (8) 3.00 (76) ø 0.28 (7) 0.47 (12) 2 Places 0.62 (16) 1.00 (25) 0.31 (8) 0.35 (9) 0.31 (8) 0.62 (16) 0.28 (7.0) Dia. 1.0 (25.4) ø 0.28 (7) 3 Places 0.31 (8) 1.50 1.35 (34.3) 420 Volume 8 Sensing Solutions CA08100010E February 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616
Sensor Accessories.2 Approximate Dimensions in Inches (mm) Adjustable Bracket E58KAM18_ 0.33 x 0.66 (8.4 x 16.8) 2 Places 0.92 (23) 1.48 4.0 (102) 2.97 (75) 1.61 (41) 0.51 (13) 2.00 (51) Metal Ball Swivel Mount 4.0 (102) 3.0 (76) Plastic Ball Swivel Mount Clamping Gap This Side 0.3 (8) Diameter Slot A B 0.5 (13) 0.212 (5.4) (2 Places) 1.1 (28) C 0.75 (19) Diameter Hole 1.0 (25) D E F Clamping Gap This Side G 2.1 (53) Adjustable Bracket E58KAM30_ 0.33 x 0.66 (8.4 x 16.8) 2 Places 4.0 (102) 2.97 (75) 0.51 (13) 2.00 (51) Size A B C D 8 mm 1.96 (49.8) 1.56 (39.6) 0.20 (5.1) 0.40 (10.2) 18 mm 2.80 (71.1) 2.25 (57.2) 0.275 (7.0) 0.50 (12.7) E F G 8 mm 0.80 (20.3) 1.05 (26.7) 0.375 (9.5) 18 mm 1.00 (25.4) 1.64 (41.7) 0.75 (19.1) 1.28 (33) Cushioned Sensor Mounts 30 C Cushion Mount Diameter = B 1.13 (29) 18 mm Ball Swivel Bracket 1.95 (50) Protective Cap (Threads on Sensor)* E Overtravel Protection D Sensor Diameter = A Sensor Nut 0.2 (5) 0.20 (5) 0.60 (15) 0.160 (4) 2 Places 1.40 (36) 1.80 (46) 1.40 (36) M18X1-6G Thread 0.28 (7) Size A B C D E 8 mm M8 x 1 M16 x 1.5 0.87 (22) 0.87 (22) 0.35 (9) 12 mm M12 x 1 M22 x 1.5 0.87 (22) 1.12 (29) 0.41 (10) 18 mm M18 x 1 M30 x 1.5 1.17 (30) 1.41 (36) 0.49 (12) 30 mm M30 x 1.5 M47 x 1.5 1.47 (37) 1.72 (51) 0.57 (15) Notes Dimensions are in inches only. Sensing range will be reduced by thickness of cap s wear surface: 0.030 in (0.76 mm) maximum. 0.50 (13) 1.40 (36) 0.30 (8) Volume 8 Sensing Solutions CA08100010E February 2011 www.eaton.com 421 For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616
Index A above, 2-3 Accessories, 1-5 accidental, 3 action, 3 Adjustability, 1-3 Adjustable, 2-3, 5 adjustment, 2-3 adjustments, 2-3 aiming, 2 alignment, 1 Allows, 2-3 allows, 2 already, 2 Aluminum, 2 an, 1 and, 1-3 any, 3 Application, 1 Approximate, 5 arc, 2 are, 1, 5 aromatic, 3 AS, 2 as, 2-3 Assistance, 1 at, 1-5 Avoid, 3 axes, 2-3 axis, 2-3 B Ball, 3, 5 be, 1-2, 5 beam, 1 being, 3 body, 2 Bracket, 2-5 bracket, 1 Brackets, 1-5 brackets, 1 Bulk, 2 bulk, 2 by, 1, 3, 5 C CA, 1-5 call, 1-5 can, 1 Canada, 1 Cap, 5 cap, 5 capability, 1 CARE, 1 Catalog, 2-3 caused, 3
Index Celenex, 3 chlorinated, 3 choosing, 1 chromate, 2 Clamping, 5 clamping, 3 ClampingGap, 5 com, 1-5 Comet, 2 consider, 1 Construction, 1 construction, 2-3 Contents, 1 continued, 3 current, 1 Cushion, 5 Cushioned, 3, 5 Customer, 1 D Delivery, 1-5 Description, 1-3 designed, 1 Dia, 4 Diameter, 5 diameter, 1 dichromate, 2 dictated, 1 Dimensions, 1, 3-5 DimensionsApproximate, 4 directly, 3 Do, 1 due, 3 E each, 2-3 Eaton, 1 eaton, 1-5 electrical, 1 Electrically, 3 electrically, 2-3 environment, 1 ETN, 1 except, 2-3 exposing, 3 Extremely, 3 F families, 1 February, 1-5 filled, 3 final, 3 finish, 2 fit, 1 fix, 3 Flat, 2, 4 For, 1-5 for, 1-4 found, 1 from, 2-3 G Gap, 5 glass, 3 grounding, 3 Guide, 1 H halogenated, 3 high, 1 hold, 3 Hole, 5 horizontal, 2-3 hydrocarbons, 3
Index I Immediate, 1-5 impact, 3 in, 1-5 Inches, 4-5 inches, 5 Included, 2-3 independent, 2-3 inductive, 1, 3 information, 1 installation, 2 is, 2-3 isolated, 2-3 isolates, 3 M machined, 3 made, 3 Material, 1-3 maximum, 5 Metal, 3, 5 minimal, 1 minimum, 2 mm, 1-5 most, 1 Mount, 3, 5 Mounting, 1-5 mounting, 1-3 Mounts, 3, 5 mounts, 2-3 J jam, 2-3 K KAM, 2-3, 5 KM, 2, 4 KMParts, 1-5 KNZ, 3 L level, 1 loaded, 3 lock, 3 Locking, 2-3 long, 1 N need, 1 noise, 3 Noryl, 3 not, 2-3 Notes, 2-3, 5 Number, 2-3 Nut, 5 nuts, 2-3 O of, 1-3, 5 on, 1-3, 5 One, 2-3 one, 2 only, 1-3, 5 Operating, 3 or, 1-5 ordered, 2 other, 1 our, 1 Overtravel, 5
Index overtravel, 3 P package, 2-3 packaged, 2 packagesame, 2 Packaging, 2-3 packed, 2 Page, 1-3 per, 2-3 photoelectric, 1 pick, 3 place, 2 Places, 4-5 Plastic, 3, 5 plated, 3 poor, 3 position, 3 Precision, 3 precision, 1 prevent, 3 Prism, 2 Product, 1-2 product, 1 protect, 3 Protection, 5 Protective, 5 proximity, 1, 3 Q quantity, 2 R respective, 1 rotation, 3 rugged, 3 S Same, 3 screw, 3 section, 1 sections, 1 sector, 1 see, 2-3 Selection, 1-2 Sens, 5 sensed, 3 Sensing, 1-5 sensing, 1 Sensor, 1-5 sensor, 1-3 Sensors, 2-4 sensors, 1-3 sent, 2 Service, 1 Shaped, 2, 4 short, 2 Side, 5 site, 1 Size, 2-5 sleeves, 3 Slot, 2, 4-5 Solutions, 1-5 some, 2 specifically, 1 spring, 3 Stainless, 2 stainless, 2-3 steel, 2-3 steelpackaging, 2 Suitable, 2 suited, 1 Support, 1-5 surface, 2-3, 5 surfacedimensions, 2 Swivel, 3, 5 Rad, 4 range, 1-2, 5 reduced, 5
Index T target, 3 Tech, 1-5 temperature, 3 that, 3 the, 1-3 them, 3 thickness, 5 This, 1, 5 this, 1 those, 1 Thread, 5 threaded, 3 Threads, 5 through, 2 thru, 1 tilt, 3 to, 1, 3 Tubular, 2-4 tubular, 1, 3 Two, 2 two, 2-3 type, 1 types, 1 U W washers, 2 wear, 5 web, 1 When, 1 will, 2, 5 with, 1-4 www, 1-5 Y you, 1 Z Zinc, 2 zinc, 3 up, 3 use, 1 Used, 3 using, 1 V Valox, 3 vertical, 2-3 visit, 1 Volume, 1-5