Technical Application Guide for UP-SHINE LED Batten Light UP-DB18-16-4W
Introduction DB18 is a high quality LED batten with high luminous efficacy 115lm/w. With a reliable and robust housing structure (IK1 & IP66), this maximizes the endurance and contributes to its long lifetime. With its flexible installation accessories, it can be used in a wide variety of applications. Three size in length (7mm 13mm 16mm), and various lumens package, let it to be ideal replacement for traditional fluorescent batten. Features 1. LED batten light IP66, compact design and suitable for both indoor and outdoor applications. 2. Input voltage: 1Vac -277Vac, suitable for all the markets. 3. Elegant outlook with rearwards-directed light to illuminate the ceiling. 5. Colour rendering index (CRI): Ra > 8 6. Impact protection: IK1 7. LED service life: approx. 5, hours @L8/B1 25 C. 8. End caps: made of shockproof polycarbonate (PC). 9. Extruded PC opal diffuser with inner prisms and UV resistant, providing homogenous light distribution. 1. Flexible installation through sliding mounting bracket. Ideal for luminaire replacement. 11. Providing through-wiring for further luminaires (safety class II) connection. 12. Tool free mains cable installation on both sides through twist lock fastener cover at both sides. Application notes IP66 for indoor and outdoor use The lamp must be installed by professional electrician Ensure the power supply is switched off before fitting this product Do not touch the lamp when in use Keep away from hot steam and corrosive gas Applications Car parks, warehouses, workshops, underground areas. Certificate SAA
Product Information 16 78 53.5 Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-DB18-16-4W AC1-277V 4W.9 48 14 o 3K 5h 8 No 16*78*53.5mm UP-DB18-16-4W AC1-277V 4W.9 452 14 o 4K 5h 8 No 16*78*53.5mm UP-DB18-16-4W AC1-277V 4W.9 468 14 o 5K 5h 8 No 16*78*53.5mm UP-DB18-16-4W AC1-277V 4W.9 452 14 o 57K 5h 8 No 16*78*53.5mm Driver data Sheet Driver data Main Power Input rated Voltage Frequency Input Voltage AC1-277V 5/6Hz AC9-35V Efficiency 86% Total load Wattage 4W±5% Power Factor.9 Rated input current Full load output Voltage Rated output current Output current range.45a DC65-75V 26mA*2 (26mA*2)±5% Power tolerance ±5% Current output tolerance ±5% Short circuit protection Over voltage protection Over temperature protection PASS PASS PASS THD 2% Withstand voltage Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 4W Ⅱ IP66-2 o C~45 o C ~9% -2 o C~65 o C
Spectral Distribution 3K 4K.8.7.6 Max=7798 [1.=2] 3.2 SDCM F3K.8 Max=753 [1.=2].7.6.37 SDCM F4K.5.4.3 x=.4427 y=.3996.5.4.3 x=.381 y=.388.2.2.1.1.. 38 5 6 7 8 38 5 6 7 8 5K 57K.8 Max=9472 [1.=2] 1.25 SDCM F5K.8 Max=588 [1.=2] 5.69 SDCM F57K.7.7.6.6.5.4.3 x=.3483 y=.3619.5.4.3 x=.3234 y=.3444.2.2.1.1. 38 5 6 7 8. 38 5 6 7 8 Photometric Diagram 3K 4K -12-9 -/+18 12 9 1 9 8 MH=1m C/18 C9/27 Flux out: 243 lm -12-9 -/+18 12 9 15. 13.5 12. MH=1m C/18 C9/27 Flux out: 198 lm 2 7 3 1.5 4 6 5 6 9. 7.5 6 4 9 6. 8 3 12 4.5-3 1 3 2 1-3 15 3 3. 1.5 AVERAGE BEAM ANGLE(5%): 131.2 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 11.7deg Diameter AVERAGE BEAM ANGLE(5%): 131.4 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 19.89deg Diameter 5K 57K -12-9 -/+18 12 9 15. 13.5 12. MH=1m C/18 C9/27 Flux out: 2274 lm -12-9 -/+18 12 9 15. 13.5 12. MH=1m C/18 C9/27 Flux out: 227 lm 3 1.5 3 1.5 6 9. 7.5 6 9. 7.5 9 6. 9 6. 12 4.5 12 4.5-3 15 3 3. 1.5-3 15 3 3. 1.5 AVERAGE BEAM ANGLE(5%): 131. DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 19.14deg Diameter AVERAGE BEAM ANGLE(5%): 13.7 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 11.2deg Diameter
Polar Diagram Comparison -15 O 18 O 15 O -12 O 12 O -9 O 9 O 3 6-6 O 9 6 O 12-3 O 15 3 O O AVERAGE BEAM ANGLE (5%): 13.7DEG C/18, 156.9 deg C3/21, 139.3 deg C6/24, 116.9 deg C9/27, 19.9 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) 8 7 6 5 4 3 2 1 65 o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% 8% 75% FLUX.1.5 U'V' 7%. 1 2 3 4 5 6 7 8 9 1 LifeTime (hours).35.3.25.2.15 Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C 9 Temperature ( o C) 8 7 6 5 4 3 2 1 11:13:13 11:31:1 11:49:1 12:7:1 12:25:1 12:43:1 13:1:1 13:19:1 13:37:1 Time 13:55:1 14:13:1 14:31:1 14:49:1 15:7:1 15:43:1 16:1:1 16:19:1 16:37:1 IC Capacitor MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature.
ART-NR UP-DB18-16-4W Linkable luminaries Qty 1-13V 2-277V 12 26 Installation 1 Step1 Step2 Knock 2pcs plastic anchors into ceiling. Fastening the clips on the ceiling. Step3 Step4 L N L = BROWN N = BLUE Open the end cap, put the wires through the hole, connect the terminal block (Brown to L, Blue to N), tighten the end cap to prevent the water into the lamp. Put the LED batten back until it is stuck by clips. Installation 2 Step1 Step2 Knock 2pcs plastic anchors into ceiling, fix the wire regulating device on ceiling. Put the hook through metal plate, embed the metal plate in the slot of the lamp body.
Step3 Step4 L N Hanging the lamp to the suspending wires. L = BROWN N = BLUE Open the end cap, put the wires through the hole, connect the terminal block (Brown to L, Blue to N), tighten the end cap to prevent the water into the lamp. Adjust the length of suspending wires on same level, turn on the light. Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 181.5*23*19.5 1 8 6 2'' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) 338 228 28 678 468 56 Phone: +86 755 2919 7389 Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China