INTRODUCTION T Y R E C H A N G E R S Today s tyre market presents many challenges, including; run-flat systems, low profile tyres and increasing diameter sizes. Our tyre changers are famous worldwide for their outstanding quality and are designed to handle the demands of the busiest tyre workshops in the world, without compromising on durability and ease of operation. During the design process we work closely with leading tyre groups and vehicle manufacturers to ensure that our products meet the needs of today s vehicle design. As a result, John Bean tyre changers are approved by most leading vehicle and tyre manufacturers. See the website for our full range of products Our directly employed network of UKAS & GEA accredited engineers are on hand to provide routine maintenance to keep your investment in the best working condition. Our National Service Division With this experienced and dedicated team, the John Bean brand has an unparalleled reputation for providing the highest quality, excellent value and great service. Call us now... 01553 697233 *2 year warranty applies to all products unless stated otherwise. TM Q U A L I T Y A N D I N N O V AT I O N S I N C E 1 9 0 4 John Bean is a trademark of Snap-on Incorporated. Snap-on Incorporated 2014. All other marks are trademarks of their respective holders. Pictures are for illustration purposes only. Specifications are subject to change without notice. www.snapon-equipment.co.uk
TURNTABLE TYRE CHANGER Q U I C K R E F E R E N C E Guide for mounting & demounting in line with wdk* requirements DEMOUNTING... Demounting the upper bead Demounting the lower bead Mounting the upper bead Move the mounting head to the rear before demounting the lower bead Position the tyre so that the valve is in 5 o clock position Position the bead breaker disc so that it will properly support the mounting procedure Press down on the tyre using the plastic bead breaker disc until there is sufficient space between tyre and rim. Carefully lubricate the bead Lubricate the tyre lever Use the tapered roller to lever the lower bead over the rim and demount the lower bead MOUNTING... Fit the plastic tyre protector on the rim flange at the point of traction Clamping the rim Clamp the rim, use jaws with plastic protectors for alloy rims Position the mounting head and return to home position Clamp the triangular bead pusher on the plastic tyre protector. Fit the tyre protector on the rim flange at the level of the mounting head. Add the Smart Bead Spacer Tail on tyres with hard sidewalls. The valve should be approx. 10 cm right of the mounting head On tyres with hard sidewalls also add the Smart Bead Spacer Tail, making sure not to compress the belt edge. Support the bead pusher with the hand. Adjust the mounting head in working position Insert the tyre lever into the drop centre of the rim between bead and rim flange where the tyre protector is fitted Lubricate tyre sidewalls and bead (also inside) with proper lubricant, but do not lubricate the valve Mounting the lower bead Continue mounting and gradually release the pressure exerted by the bead pusher in order to relieve the bead as much as possible Slowly complete the mounting procedure so that bead and rim are protected Place the tyre on the rim, paying attention to the direction of rotation of the tyre Use the tyre lever to lever the bead over the mounting head, using the bead pusher to push the bead into the drop centre in 3/6/9 o clock positions Completely demount the upper bead Remove all tools and inflate the tyre Make sure the valve is opposite the mounting head Mount the lower bead using the mounting head www.snapon-equipment.co.uk REQUIRED EQUIPMENT... Turntable tyre changer of type monty plus Pneumatic mounting tool *Association of German Tyre Industry
S W I N G A R M R A N G E T Y R E C H A N G E R S T1000 Swing Arm Tyre Changer - 6027786 The mounting arm of this tyre changer swings to the side so that it can be installed in a space-saving manner directly near a wall. Due to its special shape, the bead breaker blade handles rims gently and facilitates operation considerably. Workshops with small to medium tyre service volume. Bead breaker Swing arm for minimum space requirement Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim Four self centring turntable jaws Plastic protection on mounting head to avoid damage to alloy rims Ergonomic and user-friendly arrangement of pedals Handheld-inflating valve Outer clamping range up to 20 Options MH10 PRO swing helper arm Inner Clamping Range 10-22" Outer Clamping Range 10-20" Rim Width 3-12" Max. Tyre Width 13" Max. Wheel Diameter 33" Bead Breaking Range 3-10" Dimensions (H x W x D) Weight Compressed Air Supply Power Supply 1490 x 790 x 890 mm 173 kg 240 V 1 Ph 50 Hz w w w. s n a p o n - e q u i p m e n t. c o. u k
P N E U M AT I C R A N G E T Y R E C H A N G E R S T3000 Tilt Back Post Tyre Changer - EEWH509BE1 With more cars being fitted with larger wheels it s important to have the right equipment that fits your customers needs. The T3000 is ideal for handling wheels and tyres of a wide variety of sizes and types. Featuring sliding jaws and an extended clamping range it s able to change wheels up to 22". Plus, this now comes with the MH320 PRO helper arm as standard. Workshops with small to medium tyre service volume. Bead breaker Mounting head and jaws are provided with plastic protectors. Mounting head vertically and laterally adjustable in spaced-apart position relative to rim The tilt-back post and the four ergonomic pedals stand for user-friendly operation Outer clamping range up to 20" Accurate and quick operation due to the self-centring four-jaw turntable controlled by two clamping cylinders MH320 Helper Arm Inner clamping range 12-22" Outer clamping range 10-20" Rim width 3-13" Max. tyre width 12" Max. wheel diameter 33" Bead breaking range 3-10" Dimensions (H x W x D) 490 x 790 x 965 mm Weight 200 kg Compressed air supply Power supply 240 V 1Ph 50 Hz Turntable speed 7 rpm
P N E U M A T I C R A N G E T Y R E C H A N G E R S T5000 Pneumatic Tilt Back Post Tyre Changer - EEWH558AE2 The T5000 with the pneumatic mounting tool MH320 PRO, is for gentle and user-friendly mounting and demounting of UHP and run-flat tyres in line with OEM specifications. Workshops with medium tyre service volume handling UHP and run-flat tyres. Double-acting 2 speed bead breaker cylinder Mounting head, vertically and laterally adjustable in spaced-apart position relative to the rim (pneumatically controlled) Four self centring turntable jaws Mounting head and jaws are provided with plastic protectors Ergonomic and user-friendly arrangement of pedals Quick-inflating valve Outer clamping range up to 24" Quick change plastic demount head Pneumatic tilt back post, pneumatically locked in working position MH320 PRO suited for handling run-flat tyre systems Tool box with integrated precision pressure gauge Bead breaker blade supported in three joints and adjustable in five positions Inner clamping range 12-24" Outer clamping range 10-24" Rim width 3-12" Max. tyre width 15" Max. wheel diameter 33" Bead breaking range 3-10" Dimensions (H x W x D) Weight Compressed air supply Power supply Two turntable speeds 1640 x 1010 x 1250 mm 265 kg 240 V 1 Ph 50 Hz 7 and 1 Ph
P N E U M A T I C R A N G E T Y R E C H A N G E R S T5000 Plus Pneumatic Tilt Back Post Tyre Changer - EEWH558AE7 The T5000, with the pneumatic mounting tool MH320 PRO and plus kit, has been certified by wdk for gentle and user-friendly mounting and demounting of UHP and run-flat tyres in line with OEM specifications. With extra tyre pushers and plastic protectors the T5000 gives you more protection when fitting the tyre resulting in less damage to the rim. Workshops with high tyre service volume handling UHP and run-flat tyres. Double-acting 2 speed bead breaker cylinder Mounting head, vertically and laterally adjustable in spaced-apart position relative to the rim (pneumatically controlled) Four self centring turntable jaws Mounting head and jaws are provided with plastic protectors Ergonomic and user-friendly arrangement of pedals Quick-inflating valve Quick change demount head Outer clamping range up to 24" Pneumatic tilt back post, pneumatically locked in working po sition Re-designed MH320 PRO suited for handling run-flat tyre systems (additional optional adaptors required for PAX and CSR) Pedal controlled inflation Tool box with integrated precision pressure gauge Bead breaker blade supported in three joints and adjustable in five positions Certified to WDK (German Tyre Industry Association) PLUS Kit Plastic bead breaker disc Triangular bead pusher Plastic protector for bead breaker blade Spacers for bead breaker blade Tyre lever plus Smart bead spacer tail Plastic tyre protector Plus kit operation manual * 30 mm rod included in retrofit kits only Inner clamping range 12-24" Outer clamping range 10-24" (28" with optional adaptors) Rim width 3-14" Max. tyre width 15" Max. wheel diameter 33" Bead breaking range 3-10" Dimensions (H x W x D) 1610 x 1230 x 1310 mm Weight Compressed air supply Power supply Two turntable speeds 310 kg 240V 1Ph 50Hz 7 and 13 rpm - 3 Ph w w w. s n a p o n - e q u i p m e n t. c o. u k
A U T O M AT I C R A N G E T Y R E C H A N G E R S Centaur Platinum Automatic Tyre Changer - EEWH542AE1 The Centaur is a leverless high-productivity tyre changer for passenger car and light van tyres. The dual-disc bead breaker, the centre clamp system and the automatic mounting tool make the Centaur one of the most productive tyre changer solutions on the market. Fast, safe and accurate on standard tyres, UHP (Ultra High Performance) and runflat tyres, it has a unique Electronic sync dual-disc bead breaker ensuring gentle, faster, easier, more ergonomic and effortless bead breaking without damaging tyre bead or sidewall. Workshops with high service volume on UHP low profile & run flat tyres. Wheel lift Centre type quick fit wheel clamping flange Tool box Mounting tool with patented integrated demounting finger Inflation gauge Control panel Mounting / demounting roller and bead breaker disc Bead press arm Mirror Accessory tray Control pedals Laser pointer Top-side bead seating kit Sidewall press arm ESDB Electronic synchronised dual-disc bead breaker for ergonomic operation Clamping Range 12-30" Max. wheel diameter 1200 mm Max. rim width 13" Dimensions (H x W x D) 2260 x 1700 x 1500 mm Weight 430 kg Compressed air supply Power supply 230 VAC 1ph 50/60 Hz Turntable speed* 7 / 14 rpm *1Ph versions are single speed only
A U T O M AT I C R A N G E T Y R E C H A N G E R S Quadriga 1000-6028650 This automatic tyre changer with its quick procedures, controlled power and accuracy guarantees optimum results because all operations are highly efficient and labour-saving. With no risk damage to both tyres and rims, this tyre changer is designed to handle all types of wheels and tyres, especially UHP and run-flat tyres. Designed for prestige wheels, including low profile & run flat tyres Certified to WDK (German Tyre Industry Association) Non-contact detection of rim contour by laser Automatic control of mounting and demounting tools Automatic labour-saving and accurate positioning of wheels on clamping flange by means of wheel lift Hydraulic clamping of wheel via clamping flange and quick nut Rotating bead breaker disc with adjustable pitch angle Integrated bead pusher Pedal-controlled inflator Roller bead breaker for breaking both beads - reduces risk of rim & tyre damage www.snapon-equipment.co.uk Rim diameter 12-30" Max. wheel diameter 47" / 1200 mm Max. rim width 17" Dimensions (H x W x D) 1850 x 1290 / 1350 x 2240 mm Weight incl. lift 820 kg Compressed air supply Power supply 230 VAC 1ph 50Hz
JOHN BEAN RANGE T Y R E C H A N G E R S SIZE DOES MATTER JOHN BEAN TYRE CHANGERS Covering wheels up to 47 inches * *47" is achievable with adaptors on the larger models. John Bean is a trademark of Snap-on Incorporated. Snap-on Incorporated 2014. All other marks are trademarks of their respective holders. Pictures are for illustration purposes only. Specifications are subject to change without notice. Scan this code to view our full range of products on the snapon-equipment website TM Denney Road, King s Lynn, Nor folk PE30 4 H G tel: +44 (0) 1553 697233 - fax: +44 (0) 1553 697254 email: enquiries-soeuk@snapon.com - www.snapon-equipment.co.uk IS A BRAND WITHIN