2G. Technical Specifications

Similar documents
Biogas Engine E 0836 LE 202 Technical Data for 60%-CH 4, 40%-CO 2

Natural Gas Engine E 0836 E 302 Technical Data

Natural gas engine E 0836 LE 202 Technical data

1B20 1B30 1B40. The engineering result of careful market research: Small, light, powerful and universally applicable kw HP.

Technical description CHP MODULE

Generator set data sheet 1000 kw continuous. Fuel type: Natural gas MI 62 +

Technical specification agenitor 306 NG

Technical specification agenitor 404b NG

Technical specification agenitor 408 NG

Technical data TAD1641VE

6 Displacement, total Compression ratio 16,5:1 Dry weight. Engine only, excluding cooling system GenPac

Technical data TAD1641GE

Technical data TAD731GE

Technical data TAD1642GE

Technical data TAD941GE

Technical data TAD1242GE Prime & Standby Power

See Note. 100% of rated load

EC Series GMS200C. Generator Set Specification. Your Partner for Power. Page of 5

See Note. 100% of rated load

See Note. 100% of rated load 2,4,6, (17.73)

Technical data TWD1240VE

1,200/1,500/1,800 rpm siemens.com

Technical data TAD732GE With mounted radiator

Technical data TAD1241GE Prime & Standby Power

EP Series WPS150S. Generator Set Specification. Super Quiet, Superior Life! Page of 5

HEAT REJECTION HEAT REJECTION AND OPERATING DATA MODEL L36GL/GLD; LOW SPEED TURBOS.

See Note. 100% of rated load

See Note. 100% of rated load

Technical data TAD720GE (mech & EDC4) Prime & Standby Power

See Note. 100% of rated load. Mechanical efficiency ISO3046/1 2,4,7 35.2% 34.8% 34.1% Electrical efficiency ISO3046/1 2,4,6,7 33.7% 33.4% 32.

See Note. 100% of rated load

Technical data TAD532GE

GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

2500 Prime 2200 Continuous

2500 Prime 2100 Continuous Emissions level: EPA NSPS Stationary Emergency Tier 2

Ultra-low sulphur diesel (15 ppm sulphur)

GROUPCODE NEN : ANSI : STEEL BS : STEEL

SP Stationary concrete pump. Concrete output max. 113 m³/h Concrete output max. 162 bar. 18,300-19,400 lb

Medium speed generator sets Products and applications

Generator set data sheet Prime. Fuel consumption. Engine Standby rating Prime rating Continuous rating. Fuel flow

POWER. Gas Engines for Power Generation. MAN Engines

MTU Friedrichshafen. MTU Project No. - ENGINE DATA - Printout: (y-m-d) Sheet 1

Technical Data TRS TRS Series. Gas Engine rev/min

DEUTZ Engine Documentation Genset Manual. BF4M2012C (D2OC74,9) - 50 Hz 1/5 DEUTZ AG

POWER. Gas Engines for Power Generation. MAN Engines

GEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM

Technical data TAD740GE

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

PERFORMANCE DATA [1HZ00788] JULY 09, 2014 For Help Desk Phone Numbers Click here

1135 Prime 1000 Continuous Emissions level: EPA NSPS Stationary Emergency Tier 2

Displacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 RPM GEAR PUMPS T3S

JMC 320 GS-N.L. Technical Description. Cogeneration Unit-Container. with Island Operation no special Grid Code

Technical data TAD1242GE. General

Technical data TAD1241GE. General

TAG3. Diesel engine - ElectropaK. Series kwm 1500 rpm. Basic technical data. Ratings. Total weight of ElectropaK

TG 150 G8V TX 86 (Dwg. No /xx)

Introduction. Application Technology Wärtsilä Diesel Oy, Marine. Vaasa, 24 March 1997

Technical Data TWG2A TWG3A Series. Diesel Engine - ElectropaK rev/min. Basic technical data

Power. Gas engines for CHP units and gensets.

L58/64, L48/60, V48/ L40/54, L32/40, V32/ L28/32A, V28/32A, L27/ L23/30A, V23/30A, 48 L32/40DG, V32/40DG 49-50

Technical Sales Document

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

Medium speed generator sets. Products and applications

G3306B Oilfield Gas Generator Set

Technical Sales Document

D I E S E L G E N E R A T O R S E T S

GEAR MOTORS. Displacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 RPM

L 16 / 24. Marine Diesel Engine. Main Specification. Engine Type rpm 1,000 1,200

GEN SET PERFORMANCE DATA [HCC PREFIX]

NATURAL GAS CONTINUOUS

144 5, ,50 Compression ratio 16,5:1 Dry weight. Engine only, excluding cooling system GenPac. Engine only, excluding cooling system GenPac

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Displacement 5.3L 325 CID. Stroke 92.0 mm in. Firing Order Spark Plug Gap 1.02 mm 0.04 in

Power Solution Supplier

Technical Data 4008TAG 4008TAG1 4008TAG Series. Diesel Engine - ElectropaK

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Continuous Baseload. Prime Power

Diesel engine D 2866 LE20x Technical Data

3056 MARINE PROPULSION

D9 MG HE Base on water temp 38 C/100 F General

CREATING POWER SOLUTIONS. 2L41C 3L41C 4L41C 4L42C. Hatz diesel engines data sheet.

The Four Stroke Cycle

MAN Diesel & Turbo. Main Engine Room Data. Project name BrasNave 25 Project type Project number 3 Date 2010 Yard

Wärtsilä 46F PRODUCT GUIDE

LASER & LOW BODY Fan Coil Units 2 & 4 pipe system A complete range from 0.7 kw up to 9.5 kw

INDUSTRIAL GAS ENGINE SGI-13

This project guide is intended as a tool to assist in project work for installations that include Bergen engines.

Ratings TAG2A (1500 rpm)...1: TAG2A (1800 rpm)...1: TAG3A (1500 rpm)...1: TAG3A (1800 rpm)...

Engine only. Engine only. without fan kw hp with fan kw hp Power setting

NATURAL GAS CONTINUOUS 2055 ekw 2569 kva 60 Hz 1800 rpm 480 Volts

This project guide is intended as a tool to assist in project work for installations that include Bergen engines.

Technical data TWD1643GE

INDUSTRIAL GAS ENGINE SGI-13 TECHNICAL DATA

Technical data TAD1353GE

1104D-44TG2 1104D-44TG kwm 1500/1800 rpm. ElectropaK. Series. Basic technical data. Performance

4016TAG1A 4016TAG2A. Series kwm 1500 rpm kwm 1500 rpm ElectropaK. Ratings. Basic technical data

Transcription:

2G. Technica Specifications patruus 400 (400 kw) Natura Gas

Patruus 400 NG (0Hz) Process Otto Gas Enge MAN Gas Enge Arrangement of cyders V - Arrangement Numbers of cyders Enge dispacement 21.93 RPM 1/m Gas mixture temperature 2 Lambda 1.54 Exhaust gas mass 2140 kg/h Combustion air mass 201 kg/h e. Power 400 kw Therma Power max. 55 kw at 248 Fue consumption 8728 Btu/kWh Tota firg output 107 kw Gas consumption 3.3 cfm at 0.3 kw/ft³ Eectrica efficiency 37.2 Therma efficiency 51.7 Overa efficiency 88.8 Power cassification number 0.719 Enge sound pressure eve 103 db (A) 1 ft distance Siencer sound pressure eve 5 db (A) 30 ft distance Exhaust emissions: at 15 of O 2 CO 2.5 ( 300) Gms/BHP-Hr (ppm) NO x 1.0 ( 91) Gms/BHP-Hr (ppm) HCHO 0.07 ( 13.4) Gms/BHP-Hr (ppm) NMHC 0.2 ( 3) Gms/BHP-Hr (ppm) Fue composition See Technica Information next Page CHP Eectrica switchboard 13. x 4.92 3.28 x 7.22 x 1.97 ength x width width x height x depth Pipg connection Heatg-system Exhaust m. DN 80 m. DN 200 at 3 difference max. 0.435 m back power Data at DIN ISO 304-1

NaturaGas Enge E 2842 LE 322 Technica Data Mixture coog up to 50 2 ENGINE DATA = 1.54 METRIC Rated speed ISO standard power (COP) Air ratio kw 420 1,54 bhp 53 1,54 Configuration No of cyders Bore Stroke Swept voume L V - enge 8 142 21,93 cu V - enge 5,04 5,59 1338 Direction of rotation ookg on fywhee Fywhee housg Rg gear with number of teeth Compression ratio Mean effective pressure Mean piston speed Z 10 Z 10 m/s :1,77 8,52 /s :1 185,2 335,4 Lube oi consumption Lube oi fig quantity m./max. kg/h 0,13 40/90 0,033 10.5/23.8 Cooant fig quantity Max. operatg pressure M. enge cooant circuation quantity /m 23 3 719 /m,08 43,5 189,9 Cooant temperature m. Max. cooant temperature Difference (et - outet max.) 80 88 17 190 Max. mixture et temperature after throtte vave Max. mixture coog water et temperature LT M. mixture coog water circuation quantity LT /m 50 45 8 /m 2 113 17,9 Max. mixture coog water et temperature HT M. mixture coog water circuation quantity HT /m 85 287 /m 185 75,82 max. suction pressure max. exhaust back pressure m m 15 40 0,22 0,58 Enge width Enge ength Enge height Enge weight, dry kg 1142 1570 1155 1420 b 44,9 1,81 45,47 3131 Lube oi to MAN works standard M 3271-2 and cooant to MAN works standard M 324 N/NF/SNF Gas quaity to MAN data sheet - mimum requirement for the gas quaity for MAN gas enges Air ratio measured by ambdameter ETAS LA 4_E

Mixture coog up to 2 RATING DATA Load 100 75 50 Ignition timg BTDC ISO standard ratg 23885 17914 11942 Cooant heat 1472 25 10407 Mixture heat HT 3071 1535 284 Mixture heat LT 79 455 398 Exhaust heat up to 248 13859 10930 7983 Radiation heat max. 1934 1308 853 Energy put 1703 47315 33553 Fue consumption Btu/bhp-hr 573 721 7149 Efficiency mechanica 38,7 37,9 35, therma 51,2 53,0 55,7 tota 89,9 90,9 91,3 Mass fows Combustion air 4545 3394 2343 Fue 173 133 94 Exhaust gas mass fow rate, wet 4718 3527 2437 Temperatures Exhaust gas temperature 89 899, 933,8 Emissions at 100 oad (Correation 15 O 2 ) NO X CO 1,0 2,5 HCHO (Formadehyde) 0,07 NMHC 0,2 Reference gas mixg unit: RMG 985-200/100 and ignition system Motortech MIC511 The technica data are based on natura gas with a caorific vaue of 970 Btu/cu ft and a methane no. > 80 The technica data dicated is based on standard conditions acc to DIN ISO 304-1 Standard conditions: Ratg adaptation at ambient conditions acc to DIN ISO 304-1 The toerance for the specific fue consumption is + 5 at rated output The toerance for the usabe heat is 7 at rated output The cooant data are based on a 45 portion of antifreeze Atmospheric pressure: 14,5 or 328 ft above sea eve Air temperature 77 Reative air humidity 30

Mixture coog up to 80 17 ENGINE DATA = 1.1 METRIC Rated speed ISO standard power (COP) Air ratio kw 400 1,1 bhp 53 1,1 Configuration No of cyders Bore Stroke Swept voume L V - enge 8 142 21,93 cu V - enge 5,04 5,59 1338 Direction of rotation ookg on fywhee Fywhee housg Rg gear with number of teeth Compression ratio Mean effective pressure Mean piston speed Z 10 Z 10 m/s :1,1 8,52 /s :1 17,4 335,4 Lube oi consumption Lube oi fig quantity m./max. kg/h 0, 40/90 0,032 10.5/23.8 Cooant fig quantity Max. operatg pressure M. enge cooant circuation quantity /m 23 3 91 /m,08 43,5 182,5 Cooant temperature m. Max. cooant temperature Difference (et - outet max.) 80 88 17 190 Max. mixture et temperature after throtte vave Max. mixture coog water et temperature LT M. mixture coog water circuation quantity LT /m 80 78 147 /m 17 172 38,83 Max. mixture coog water et temperature HT M. mixture coog water circuation quantity HT /m 75 147 /m 17 38,83 max. suction pressure max. exhaust back pressure m m 15 40 0,22 0,58 Enge width Enge ength Enge height Enge weight, dry kg 1142 1570 1155 1420 b 44,9 1,81 45,47 3131 Lube oi to MAN works standard M 3271-2 and cooant to MAN works standard M 324 N/NF/SNF Gas quaity to MAN data sheet - mimum requirement for the gas quaity for MAN gas enges Air ratio measured by ambdameter ETAS LA 4_E

Mixture coog up to 17 RATING DATA Load 100 75 50 Ignition timg BTDC 14 14 14 ISO standard ratg 22748 1701 11374 Cooant heat 14103 170 100 Mixture heat HT 38 1422 171 Mixture heat LT 0 0 0 Exhaust heat up to 248 13384 1055 74 Radiation heat max. 1820 51 853 Energy put 58575 45495 3190 Fue consumption Btu/bhp-hr 552 785 7150 Efficiency mechanica 38,8 37,5 35, therma 52,3 53,3 5,0 tota 91,1 90,8 91,5 Mass fows Combustion air 4510 341 2323 Fue 14 8 90 Exhaust gas mass fow rate, wet 475 3544 2413 Temperatures Exhaust gas temperature 85,4 883,4 914 Emissions at 100 oad (Correation 15 O 2 ) NO X CO 1,0 2,5 HCHO (Formadehyde) 0,07 NMHC 0,2 Reference gas mixg unit: RMG 985-200/100 and ignition system Motortech MIC511 The technica data are based on natura gas with a caorific vaue of 970 Btu/cu ft and a methane no. > 80 The technica data dicated is based on standard conditions acc to DIN ISO 304-1 Standard conditions: Ratg adaptation at ambient conditions acc to DIN ISO 304-1 The toerance for the specific fue consumption is + 5 at rated output The toerance for the usabe heat is 7 at rated output The cooant data are based on a 45 portion of antifreeze Atmospheric pressure: 14,5 or 328 ft above sea eve Air temperature 77 Reative air humidity 30