L 16 / 24. Marine Diesel Engine. Main Specification. Engine Type rpm 1,000 1,200

Similar documents
Internal Combustion Engine

2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)

Internal Combustion Engine. Prepared by- Md Ferdous Alam Lecturer, MEE, SUST

WL International. Commercial & Industrial Generator Sets. High Performance Diesel Engine & Genset Solutions. WL International

CHAPTER 2 : ESSENTIAL CHARACTERISTICS OF THE VEHICLE AND ENGINE AND INFORMATION CONCERNING THE CONDUCT OF TESTS

COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING

The Four Stroke Cycle

Unit C: Agricultural Power Systems. Lesson 1: Understanding Principles of Operation of Internal Combustion Engines

L58/64, L48/60, V48/ L40/54, L32/40, V32/ L28/32A, V28/32A, L27/ L23/30A, V23/30A, 48 L32/40DG, V32/40DG 49-50

1/4 1/2 3/4 Full 1/4 1/2 3/4 Full gph L/hr

CHAPTER 2 : ESSENTIAL CHARACTERISTICS OF THE VEHICLE AND ENGINE AND INFORMATION CONCERNING THE CONDUCT OF TESTS

INDUSTRIAL GAS ENGINE SGI-13 TECHNICAL DATA


MAN 18V48/60TS. Two-stage turbocharged diesel engine

What does pressure refer to in relation to hydrostatics and what is it dependent on?

New 2019 Ram 1500 SPECIFICATIONS

2. Discuss the effects of the following operating variables on detonation

Noble Group of Institutions, Junagadh. Faculty of Engineering Department of Mechanical Engineering

UNIT SPRINT 100 SPRINT 150 SPRINT 180

2012 Ram 1500 SPECIFICATIONS

Suzuki 50 Hp 4 Stroke Repair Manual READ ONLINE

GOVERNMENT ENGINEERING COLLEGE, GODHRA

SC300/400 NEW FEATURES. 1UZ FE Engine Item No. of Cyls. & Arrangement 8 Cylinder, V Type

Air Cooled Engine Technology. Roth 9 th Ch 6 Engine Performance Pages

2012 BMW 135i. ENGINE N55 - Service Information. N55 - Service Information

Natural gas engine E 0836 LE 202 Technical data

Doosan Marine Diesel Engines

MAN B&W Marine Engines MAN Holeby GenSets. IMO Tier ll 2012

2004 Dodge Durango Specifications

2018 Dodge Charger Pursuit SPECIFICATIONS

Natural Gas Engine E 0836 E 302 Technical Data

CAT CG170 K. Series Gas Generator Sets

BB6000 Work Sheet. Tool head. assembly. (boring head. shown) Axial feed unit Tool carrier. Hydraulic motor

ENGINE 1ZZ-FE ENGINE DESCRIPTION EG-1 ENGINE - 1ZZ-FE ENGINE

ENGINE MECHANICAL <3.8L ENGINE>

an EnPro Industries company Medium Speed, Four Stroke Diesel Engines

TECHNICAL MANUAL ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS LIST AND SPECIAL TOOLS LIST) FOR

Technical Specification

2012 Jeep Grand Cherokee SRT8 SPECIFICATIONS

DEUTZ Engine Documentation Genset Manual. BF4M2012C (D2OC74,9) - 50 Hz 1/5 DEUTZ AG

INDUSTRIAL GAS ENGINE SGI-13

2.61 Internal Combustion Engines

TOUGH NATURE, SMART PERSONALITY

ENGINE: 5.7-LITER HEMI V-8 Availability Standard on 3500 Eight-cylinder, 90-degree V-type, liquid-cooled, with variable-valve timing (VVT)

51/60G. Four-stroke gas engine

Advanced Diesel Combustion Concept: PCCI - A Step Towards Meeting BS VI Emission Regulations

TECHNICAL SPECIFICATIONS

USE OF ENERPAC HYDRAULIC EQUIPMENT PRESENTED BY: HARDISH TRIVEDI

Disassembly Machine Spec Sheet

MAN 51/60DF. Dual-fuel flexibility and reliability

Biogas Engine E 0836 LE 202 Technical Data for 60%-CH 4, 40%-CO 2

European Aviation Safety Agency

Motorcycles. erall Trends. 1 Introduction. 2 Production and Demand

2019 Fiat 500 / 500 Abarth SPECIFICATIONS

Module 6 Assignment Part A

2018 Jeep Grand Cherokee Trackhawk SPECIFICATIONS

2017 Jeep Compass SPECIFICATIONS

All dimensions are in inches (millimeters) unless otherwise noted. All dimensions are measured at curb weight with standard tires and wheels.

Pump Autolub-M. Product description APPLICATION PRODUCT CHARACTERISTICS FUNCTION

2015 Dodge Charger SPECIFICATIONS

TECHNICAL SECTION. To this basic undercarriage the heavy-duty boom is fitted.

Modern Automotive Technology Chapter 16. Engine Size and Performance Measurements

GYANMANJARI INSTITUTE OF TECHNOLOGY (GMIT) SUBJECT: ELEMENTS OF MECHANICAL ENGINEERING Assignment Ch 1

Parallel Grippers. Body One piece anodized aluminum body

the PROFI-Line II Portable compressors for toughest operations l/min 225 / 330 bar Alu-Frame

SIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY :: PUTTUR (AUTONOMOUS) QUESTION BANK UNIT I I.C ENGINES

2018 Alfa Romeo Giulia SPECIFICATIONS

2019 Dodge Journey SPECIFICATIONS

Datasheet. Engine type 3/6/8DX(S)(C) Tech Library

General 4-stroke direct injected, turbocharged and aftercooled diesel engine

Tdci Engine. Tdci Engine

MAN B&W Approved Method (AM) for pre-2000 engines

Insight in the Development of MAN s Game Changing 45/60CR Engine Portfolio

Grand Cherokee Jeep Grand Cherokee SPECIFICATIONS SPECIFICATIONS GENERAL INFORMATION. Four-door sport-utility vehicle

European Aviation Safety Agency

Advanced Auto Tech. ASE A 1 Test Preparation Engine Lower End Theory & Service

RACH, Aluminium Hollow Plunger Cylinders

Standard Fiat 500 Pop, Sport and Lounge

DEUTZ Corporation 914 Gas. Customer / Event DEUTZ Corporation Presentation DATE, 2010

2019 Dodge Grand Caravan SPECIFICATIONS

Power. Gas engines for CHP units and gensets.

2019 Chrysler Pacifica Hybrid SPECIFICATIONS

1992 ACURA INTEGRA ENGINE AND ELECTRICAL

THERMAL ENGINEERING LAB MANUAL

95 MW Wartsila Natural Gas Generator Power Plant

Greater efficiency, more power: The new Series 4000 natural gas engines

Assignment-1 Air Standard Cycles

ME Thermal Engineering Question Bank

6,600 erpm (electronically limited) Unleaded regular, 87 octane (R + M)/2

NEF SERIES N60. Industrial application N60 ENT

Super Silent, Superior Life!

Technical Data 4008TAG 4008TAG1 4008TAG Series. Diesel Engine - ElectropaK

Stainless steel Cylinders Series 90

05 Marks (c) Sketch and explain Lancashire Boiler.

DESIGN OF AN AIR COOLED CYLINDER HEAD FOR TWO FAMILYS OF DIESEL ENGINES WITH DIRECT INJECTION

Assignment-1 Introduction

Continuous Baseload. Prime Power

Engine Selection Guide Two-stroke MC/MC-C Engines

100cc REEDJET USA TaG

Diesel engine D 2866 LE20x Technical Data

Transcription:

L 16 / 4 L 16 / 4 rpm 1,000 1,00 Bore mm 160 Stroke mm 40 Stroke/Bore ratio 1.5 : 1 cm 01 Swept volume per Cyl. liter 4.8 Compression ratio 15. : 1 Mean effective pressure bar.4 0.7 Max. combustion pressure bar 170 170 Mean piston speed m/sec 8 9.6 Power per Cylinder kw 90 100 5L 16/4 (1,000) 5L 16/4 (1,00) 6L 16/4 (1,000) 6L 16/4 (1,00) 7L 16/4 (1,000) 7L 16/4 (1,00) 8L 16/4 (1,000) 8L 16/4 (1,00) 9L 16/4 (1,000) 9L 16/4 (1,00),751 1,400 4,151,6 9.5,751 1,400 4,151,6 9.5 3,06 1,490 4,516,6 10.5 3,06 1,490 4,516,6 10.5 3,301 1,585 4,886,6 11.4 3,301 1,585 4,886,6 11.4 3,576 1,680 5,56,66 1.4 3,576 1,680 5,56,66 1.4 3,851 1,680 5,531,66 13.1 3,851 1,680 5,531,66 13.1 Q Min. distance between engines : 1,800 mm Depending on alternator included a standard alternator

L 1 / 31 L 1 / 31 rpm 900 1,000 Bore mm 10 Stroke mm 310 Stroke/Bore ratio 1.48 : 1 cm 346 Swept volume per Cyl. liter 10.7 Compression ratio 15.5 : 1 Mean effective pressure bar 3.6.4 Max. combustion pressure bar 00 00 Mean piston speed m/sec 9.310.3 Power per Cylinder kw 190 00 5L 1/31 (900) 5L 1/31 (1,000) 6L 1/31 (900) 6L 1/31 (1,000) 7L 1/31 (900) 7L 1/31 (1,000) 8L 1/31 (900) 8L 1/31 (1,000) 9L 1/31 (900) 9L 1/31 (1,000) (C) (H) Genset mm mm ton 5,860 3,050 1.3 5,860 3,050 1.3 6,300 3,100 4.3 6,300 3,100 4.3 6,760 3,100 7.3 6,760 3,100 7.3 7,10 3,100 30.3 7,10 3,100 30.3 7,660 3,50 33.3 7,660 3,50 33.3 Q Min. distance between engines :,400 mm(without gallery) and,600 mm(with gallery) Depending on alternator included a standard alternator

L 3 / 30 H L 3 / 30 H rpm 70 750 900 Bore mm 5 Stroke mm 300 Stroke/Bore ratio 1.33 : 1 cm 398 Swept volume per Cyl. liter 11.9 Compression ratio 13 : 1 Mean effective pressure bar 18. 18.1 17.9 Max. combustion pressure bar 130 130 130 Mean piston speed m/sec 7. 7.5 9.0 Power per Cylinder kw 130 135 160 5L 3/30 (70) 5L 3/30 (750) 6L 3/30 (70) 6L 3/30 (750) 6L 3/30 (900) 7L 3/30 (70) 7L 3/30 (750) 7L 3/30 (900) 8L 3/30 (70) 8L 3/30 (750) 8L 3/30 (900) 3,369,155 5,54,383 18.0 3,369,155 5,54,383 17.6 3,738,65 6,004,383 19.7 3,738,65 6,004,383 19.7 3,738,65 6,004,815 1.0 4,109,395 6,504,815 1.4 4,109,395 6,504,815 1.4 4,109,395 6,504,815.8 4,475,480 6,959,815 3.5 4,475,480 6,959,815.9 4,475,340 6,815,815 4.5 Q Min. distance between engines :,50 mm Depending on alternator included a standard alternator

L 7 / 38 L 7 / 38 rpm 70 750 Bore mm 70 Stroke mm 380 Stroke/Bore ratio 1.4 : 1 cm 57.6 Swept volume per Cyl. liter 1.8 Compression ratio 15.9 : 1 Mean effective pressure bar 33.5 Max. combustion pressure bar 190 190 Mean piston speed m/sec 9.1 9.5 Power per Cylinder kw 300 30 5L 7/38 (70) 5L 7/38 (750) 6L 7/38 (70) 6L 7/38 (750) 7L 7/38 (70) 7L 7/38 (750) 8L 7/38 (70) 8L 7/38 (750) 9L 7/38 (70) 9L 7/38 (750) 4,346,486 6,83 3,705 4.0 4,346,486 6,83 3,705 4.3 4,791,766 7,557 3,705 45.8 4,791,766 7,557 3,717 46.1 5,36,766 8,00 3,717 5.1 5,36,766 8,00 3,717 5.1 5,681,986 8,667 3,717 56.5 5,681,986 8,667 3,717 58.3 6,16,986 9,11 3,797 61.8 6,16,986 9,11 3,797 63.9 Q Min. distance between engines : 3,000 mm(without gallery) and 3,400 mm(with gallery) Depending on alternator included a standard alternator

L 8 / 3 H L 8 / 3 H rpm 70 750 Bore mm 80 Stroke mm 30 Stroke/Bore ratio 1.14 : 1 cm 616 Swept volume per Cyl. liter 19.7 Compression ratio 13.3 : 1 Mean effective pressure bar 17.8 17.9 Max. combustion pressure bar 130 130 Mean piston speed m/sec 7.7 8 Power per Cylinder kw 10 0 5L 8/3 (70) 5L 8/3 (750) 6L 8/3 (70) 6L 8/3 (750) 7L 8/3 (70) 7L 8/3 (750) 8L 8/3 (70) 8L 8/3 (750) 9L 8/3 (70) 9L 8/3 (750) 4,79,400 6,679 3,184 3,6 4,79,400 6,679 3,184 3,3 4,759,510 7,69 3,184 36.3 4,759,510 7,69 3,184 36.3 5,499,680 8,179 3,374 39.4 5,499,680 8,179 3,374 39.4 5,979,770 8,749 3,374 40.7 5,979,770 8,749 3,374 40.6 6,199,690 8,889 3,534 47.1 6,199,690 8,889 3,534 47.1 Q Min. distance between engines :,655 mm(without gallery) and,850mm(with gallery) Depending on alternator included a standard alternator

L 3 / 40 L 3 / 40 rpm 70 750 Bore mm 30 Stroke mm 400 Stroke/Bore ratio 1.5 : 1 cm 804.5 Swept volume per Cyl. liter 3.17 Compression ratio 13.9 : 1 Mean effective pressure bar 3.7.8 Max. combustion pressure bar 180 180 Mean piston speed m/sec 9.6 10.0 Power per Cylinder kw 480 480 6L 3/40 (70) 6L 3/40 (750) 7L 3/40 (70) 7L 3/40 (750) 8L 3/40 (70) 8L 3/40 (750) 9L 3/40 (70) 9L 3/40 (750) 6,340 3,415 9,755 4,510 75.0 6,340 3,415 9,755 4,510 75.0 6,870 3,415 10,85 4,510 79.0 6,870 3,415 10,85 4,510 79.0 7,400 3,635 11,035 4,780 87.0 7,400 3,635 11,035 4,780 87.0 7,930 3,635 11,565 4,780 91.0 7,930 3,635 11,565 4,780 91.0 Q Min. distance between engines :,835 mm(without gallery) and 3,0mm(with gallery) Depending on alternator included an alternator