BUNN WL WARMER DISCONTINUED VERSION Parts listed in this catalog may no longer be available. FRONT REAR ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice. BUNN-O-MATIC CORPORATION POST OFFICE BOX 7 SPRINGFIELD, ILLINOIS 670-7 PHONE: (17) 9-6601 FAX: (17) 9-66 97.0000 0/0 1999 Bunn-O-Matic Corporation www.bunnomatic.com
WARRANTY Bunn-O-Matic Corp. ( Bunn ) warrants the equipment manufactured by it to be commercially free from defects in material and workmanship existing at the time of manufacture and appearing within one year from the date of installation. In addition: 1.) Bunn warrants electronic circuit and/or control boards to be commercially free from defects in material and workmanship for three years from the date of installation..) Bunn warrants the compressor on refrigeration equipment to be commercially free from defects in material and workmanship for two years from the date of installation..) Bunn warrants that the grinding burrs on coffee grinding equipment will grind coffee to meet original factory screen sieve analysis for three years from date of installation or for 0,000 pounds of coffee, whichever comes first. This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that, in Bunn s judgement, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of Bunn are not authorized to make modifications to this warranty or to make additional warranties that are binding on Bunn. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon. The Buyer shall give Bunn prompt notice of any claim to be made under this warranty by telephone at (17) 9-6601 or by writing to Post Office Box 7, Springfield, Illinois, 670-7. If requested by Bunn, the Buyer shall ship the defective equipment prepaid to an authorized Bunn service location. If Bunn determines, in its sole discretion, that the equipment does not conform to the warranty, Bunn shall repair the equipment with no charge for parts during the warranty period and no charge for labor by a Bunn Authorized Service Representative during the warranty period. If Bunn determines that repair is not feasible, Bunn shall, at its sole option, replace the equipment or refund the purchase price for the equipment. THE BUYER S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AS SPECIFIED HEREIN, TO REPAIR OR, AT BUNN S SOLE OPTION, REPLACEMENT OR REFUND. In no event shall Bunn be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages. 97 000
TABLE OF CONTENTS WARMER ASSEMBLY (without Fresh Light)... WARMER ASSEMBLY (with Fresh Light)... 97 00100
BUNN WARMER ASSEMBLY (without Fresh Light) WL- 1 11 1 7 9 10 1 1 16 1 6 First Type-One Piece Floor Without Adjustable Legs FRONT REAR 1 1 17 19 0 1 7 7 First Type-One Piece Floor With Adjustable Legs P16 97 00100
ITEM PART NO. QTY. DESCRIPTION WARMER ASSEMBLY (without Fresh Light) 1 110.0006 Warmer Assy 100W, 10V (Includes items thru ) 017.000 Warmer Assy, Upper, 100W, 0V (Includes items,, & 6) 017.0001 Warmer Assy, Lower, 100W, 0V (Includes items,, & 6) 010.0000 6 Screw, Pan Head #-0 x.7" 00916.0000 6 Fastener, J-Type #-0 066.0000 1 Warmer Dish 10.0001 1 Spacer (10V only) 11.0000 1 Warmer Element 100W, 10V 0191.0000 1 Warmer Element 100W, 0V 01.0000 1 Plate, Retaining 00970.0000 Nut, Keps #- 6 1016.00 1 Lead, Upper Warmer, GRN/YEL 7.0" (0V only) 1016.0011 1 Lead, Lower Warmer, GRN/YEL 1.0" (0V only) Not Illustrated 7 0666.0000 6 Spacer, Warmer Dish - - - - - - - - Tube, Silcone,." Dia x 1." (Order item ) 9 16.0000 Decal, CAUTION - WARMERS ARE HOT 10 - - - - - - - - 1 Housing, Warmer (Not serviced separately) 00.0000 7 Screw, Truss Head #- x." 11 0.0000 1 Bushing, Strain Relief (10V only) 1 0190.0000 1 Power Connector (0V only) 016.0000 Screw, OHV Slotted #-0 x.0" 0109.0000 Lockwasher, # 0097.0000 Nut #-0 1 - - - - - - - - 1 Base, Warmer (Not serviced separately) 1 019.0000 1 Bushing, Hole 1.0" Dia. 1 07.0001 1 Screw, Ground #10 x.7" (10V only) 017.0000 1 Screw, Ground #10- x.0" (0V only) 011.0000 1 Lockwasher, #10 16 00.0000 1 Decal, Ground (0V only) 17 11.0000 Switch, Lighted (10V) 1109.0000 Switch, Lighted (0V) 1 0076.0000 1 Decal, FRONT 0077.0000 1 Decal, REAR 19 001.0000 1 Decal, BUNN (Continued) 97 00100
BUNN WARMER ASSEMBLY (without Fresh Light) (Continued) WL- 1 11 1 7 9 10 1 1 16 1 6 First Type-One Piece Floor Without Adjustable Legs FRONT REAR 1 1 17 19 0 1 7 7 First Type-One Piece Floor With Adjustable Legs P16 6 97 00100
ITEM PART NO. QTY. DESCRIPTION WARMER ASSEMBLY (without Fresh Light) 0 9.0000 1 Plate, Foot Mounting (Second Type with two piece floor) 017.0000 Screw, Truss Head #6- x." 1 91.0000 1 Plate, Bottom Base (Second Type with two piece floor) 0.000 9 Screw,Hex Crimptite #6 x." - - - - - - - - 1 Plate, Bottom Base (One piece floor without adjustable legs. Order 960.0000 and four 17.0000) 0.000 9 Screw,Hex Crimptite #6 x." 960.0000 1 Plate, Bottom Base (First Type. One piece floor with adjustable legs) 0.000 9 Screw,Hex Crimptite #6 x." 0011.0000 1 Plug, Vent 1.0" Dia (First Type. One piece floor without adjustable legs) 0096.0000 1 Decal, WARNING-ELECTRICAL 6 11.0000 Foot, Rubber ( One piece floor without adjustable legs) 00.0000 Screw, Truss Head #- x." Order item 7 17.0000 Foot, Adjustable Items thru are not illustrated 119.0000 1 Harness, Main 10V 111.0000 1 Harness, Main 0V 9 00.0000 1 Power Cord (10V only) 0 1016.001 1 Lead, GRN.0" (0V only) 1 - - - - - - - - Splice, Closed End (10V only)(not serviced) 6.0000 1 Foot Kit (Includes Feet and screws) 0.1001 - Tube, Silicone." Dia x.0" 7 97 00100
BUNN WARMER ASSEMBLY (with Fresh Light) WL- 0 1 0 19 1 Switches And Lights In Front 10 19 1 0 1 6 9 11 1 Switches In Front, Lights In Rear 19 1 17 16 1 1 9 7 First Type-One Piece Floor Without Adjustable Legs 1 0 6 0 First Type-One Piece Floor With Adjustable Legs P16 97 00100
ITEM PART NO. QTY. DESCRIPTION WARMER ASSEMBLY (with Fresh Light) 1 110.0006 Warmer Assy 100W, 10V (Includes items thru ) 010.0000 6 Screw, Pan Head #-0 x.7" 00916.0000 6 Fastener, J-Type #-0 066.0000 1 Warmer Dish 10.0001 1 Spacer 11.0000 1 Warmer Element 100W, 10V 01.0000 1 Plate, Retaining 00970.0000 Nut, Keps #- 6 0666.0000 6 Spacer, Warmer Dish 7 - - - - - - - - Tube, Silcone,." Dia x 1." (Order item ) 16.0000 Decal, CAUTION - WARMERS ARE HOT 9 -- - - - - - - 1 Housing, Warmer (Not serviced separately) 00.0000 7 Screw, Truss Head #- x." 10 0.0000 1 Bushing, Strain Relief 11 76.1000 1 Control Board, Freshness Light (Requires Programming) 0097.0000 Nut, Keps #6-1 01.000 Spacer 1 66.000 1 Clamp 1 - - - - - - - - 1 Base, Warmer (Not serviced separately) 1 06.0000 1 Decal, Red Stripe 16 019.0000 1 Bushing, Hole 1.0" Dia. 17 07.0001 1 Screw, Ground #10 x.7" 1 11.0000 Switch, Lighted 19 7.0000 1 Decal, LOWER 76.0000 1 Decal, FRONT 0 117.0001 LED, Freshness Light 9.0000 Lockwasher M6 10.0000 Nut M6 1 7.0001 1 Decal, LOWER 76.0001 1 Decal, FRONT Lights in back, switches in front 0061.0000 1 Decal, BUNN (Continued) 9 97 010
BUNN WARMER ASSEMBLY (with Fresh Light) WL- (Continued) 0 1 0 19 1 Switches And Lights In Front 10 19 1 0 1 6 9 11 1 Switches In Front, Lights In Rear 19 1 17 16 1 1 9 7 First Type-One Piece Floor Without Adjustable Legs 1 0 6 0 First Type-One Piece Floor With Adjustable Legs P16 10 97 00100
ITEM PART NO. QTY. DESCRIPTION WARMER ASSEMBLY (with Fresh Light) 9.0000 1 Plate, Foot Mounting (Second Type with two piece floor) 017.0000 Screw, Truss Head #6- x." 91.0000 1 Plate, Bottom Base (Second Type with two piece floor) 0.000 9 Screw,Hex Crimptite #6 x." - - - - - - - - 1 Plate, Bottom Base (One piece floor without adjustable legs. Order 960.0000 and four 17.0000) 0.000 9 Screw,Hex Crimptite #6 x." 6 960.0000 1 Plate, Bottom Base (First Type. One piece floor with adjustable legs) 0.000 9 Screw,Hex Crimptite #6 x." 7 0011.0000 1 Plug, Vent 1.0" Dia (First Type. One piece floor without adjustable legs) 0096.0000 1 Decal, WARNING-ELECTRICAL 9 11.0000 Foot, Rubber ( One piece floor without adjustable legs) 00.0000 Screw, Truss Head #- x." Order item 0 17.0000 Foot, Adjustable Items 1 thru are not illustrated 1 7.0000 1 Harness, Main 00.0000 1 Power Cord - - - - - - - - Splice, Closed End (Not serviced) 6.0000 1 Foot Kit (Includes Feet and screws) 0.1001 - Tube, Silicone." Dia x.0" 11 97 00100
NUMERICAL INDEX PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. 0061.0000... 9 0076.0000... 0077.0000... 00.0000... 001.0000... 00916.0000...,9 0097.0000... 00970.0000...,9 0097.0000... 9 0096.0000... 7,11 010.0000...,9 017.0000... 7,11 016.0000... 017.0000... 0109.0000... 011.0000... 01.000... 9 019.0000...,9 0190.0000... 0191.0000... 00.0000...,7,9,11 0.000... 7,11 07.0001...,9 00.0000... 7,11 0.0000...,9 017.0001... 017.000... 0011.0000... 7,11 066.0000...,9 0666.0000...,9 0.1001... 7,11 01.0000...,9 1109.0000... 111.0000... 7 11.0000... 7,11 110.0006...,9 11.0000...,9 11.0000...,9 119.0000... 7 16.0000...,9 117.0001... 9 10.0001...,9 1016.0011... 1016.001... 7 1016.00... 06.0000... 9 6.0000... 7,11 17.0000... 7,11 9.0000... 9 66.000... 9 76.1000... 9 7.0000... 11 7.0000... 9 7.0001... 9 76.0000... 9 76.0001... 9 91.0000... 7,11 9.0000... 7,11 960.0000... 7,11 10.0000... 9 1 97 010