Tanker Fittings tanker fittings for fuel tankers are designed and manufactured by to accepted industry standards. All the fittings have full product and installation support and are available at short notice in Gauteng, the Western Cape and KwaZulu-Natal through the branch network, and in the rest of southern Africa from distributors. The attached CD provides detailed product specifications on the complete range of tanker fittings. Click through from the images on the landing page for more specific product details. Proceed to contents
Back to Intro Contents Hose Equipment Tanker Equipment Barret Adaptor 100mm API Dry Break Adaptor 100mm Barret Coupling Male Tank Unit 105mm Socket 105mm Dry Break Coupling Male Tank Unit 2 (70mm) Socket 70mm Dry Break Coupling Pneumatic Tanker Overfill Sensor 4 Vapor Recovery Adaptor Pneumatic Tanker Emergency Valve (Bottom Valve) 3" Vapor Recovery Coupler 3 Pneumatic Vapour Vent 4" Vapor Recovery Coupler Sight Glasses
Barret Adaptor Available as a complete unit or individually (adaptor and dust cap). Design Benefit Petrol/diesel cross-over prevention Part Numbers 50mm Barret Adaptor c/w Dust Cap 14210 100mm Petrol Barret Adaptor c/w Dust Cap 14212 100mm Diesel Barret Adaptor c/w Dust Cap - 14213 Main body constructed from brass Heat-treated aluminium cap High-nitrile seals
100mm Barret Coupling Used for the off-loading of fuel products into underground tanks. Prevents the crossover of petrol and diesel. Design Benefits Steering wheel provides an easy method to couple and handle. 12 teeth on petrol coupler locking ring. 18 teeth on diesel coupler locking ring. Prevents petrol and diesel crossovers. Steering wheel is attached by means of 6 off M6 bolts with Nyloc nuts for ease-of-maintenance. Part Numbers 14214 Petrol 14217 Diesel All of the following parts are made from aluminium: 1. Coupling Tube 2. Steering Wheel 3. Ring Grip LM25 Heat Treated 4. Hose Tail LM25 Heat Treated Seals - Manufactured from Hi-Nitrile
Back 14217 (Diesel) 14214 (Petrol) 100mm Barret Coupler Diesel 1 100mm Barret Coupler Petrol No. Part No. Discription Qty. 1 14574 Hosetail- Barret Coupler -100mm 1 2 14575 Ring Grip 100mm Barret Coupler 1 3 50568 Tube -Aluminium 152,4 x 300mm 1 4 14578 Hand Wheel - Barret Coupler 1 5 14583 Main Seal- Barret Coupler 1 6 14584 Seal-B/Coupling Inner 1 7 50143 Hex Bolt - M6 x 12 Galvanised 6 Note: 12A is only for 100mm Barret Coupling Diesel (14217) 12B is only for 100mm Barret Coupling Petrol (14214) No. Part No. Discription Qty. 8 50127 Spring Washer M6 - Zn Plated 12 9 50115 Washer Flat M6 - Zn Plated 12 10 40143 Hex Bolt - M6 x 20 Zn Plated 6 11 14821 Retaining Clip - Barret Coupler 1 12A 14577 Lock Ring - Barret Coupler 100D 1 12B 14576 Lock Ring - Barret Coupler 100P 1 13 50091 Nyloc Nut - M6 6
Next 105mm Dry Break Coupling Suitable for petrochemicals, chemicals and solvents. Design Benefits 2 1 / 2 BSP thread. Hose and tank unit valves close automatically on closure. Designed in accordance with TEAM specifications. Selectivity to prevent product contamination available on request. Flow/pressure drop data on request. Ease of maintenance. Part Numbers Coupling 14233 Dust Plug 14237 Aluminium main body Viton seal Stainless steel internals
Back Next 14233 105mm Dry Break Coupler No. Part No. Discription Qty. 1 50126 Spring Washer - M8 Zn Plated 4 2 50009 Ball - 6mm Dia S1.S1. 45 3 146 11 Poppet Slide Rollers DB Coupler 2 4 14605 Main Body - DB Coupler 105mm 1 5 14606 Outer Body - DB Coupler 105mm 1 6 14607 Operating Ring DB Coupler 105mm 1 7 14608 Poppet - Dry Break Coupler 105mm 1 8 14823 Poppet Slide - DB Coupler 105mm 1 9 14612 Poppet Roller Shaft DB Couple r 105mm 3 10 14613 Rollers - 105mm DB Coupler 16mm 3 11 14614 Poppet Slid e Pin DB Coupler 1 12 14616 Washer DB Coupler - Teflon 2 13 14617 Wave Washer DB Coupler 105mm 2 No. Part No. Discription Qty. 14 14618 Inlet Sea12,5 DB Coupler - 105 mm 1 15 14619 Seal - Bounce Ring DB Coupler 105mm 1 16 14620 Shim - Dry Break Coupler 105mm - S1.S1. 3 17 50008 Capscrew - M8 x 35mm S1.S1. 4 18 50083 Dome Nut - M6 S1.S1. 3 19 50084 Grubscrew - M8 x 8mm S1.S1. 1 20 50128 Spring Washer - M6 316 S1.S1. 3 21 19316 O-Ring 2-231 Viton HD60 1 22 19317 O-Ring 2-226 Viton 1 23 19318 O-Ring 2-236 Viton 1 24 14615 Swivel Support DB Coupler Teflon 1 25 14819 Dry Break Coupler Handle 105mm 2 26 15693 O-Ring Viton 2-229 HD70 1
Back 15217 105mm Dry Break Dust Plug No. Part No. Discription Qty. 1 14633 Aluminium Disc - Dished 1 2 14632 Aluminium Dics -114mmOD x 8mmiD x 3mm 1 3 14631 Dust Plug Seal- Hi-Nitrile 1 4 50190 Setscrew - M8 x 45mm - Galvanised 1 5 50093 Nut - M8 - Stainless Steel 1 No. Part No. Discription Qty. 6 50200 Washer Flat - M8 Stainless Steel 1 7 14630 Knurled Nut - Dry Break Dust Cap 1 8 14580 Key Ring M20-65mm DB Dust Cap 2 9 14581 Dust Cover Chain 1
Next 70mm Dry Break Coupling Suitable for petrochemicals, chemicals and solvents. Design Benefits 1 1 / 2 BSP thread. Hose and tank unit valves close automatically on closure. Designed in accordance with TEAM specifications. Selectivity to prevent product contamination available on request. Flow/pressure drop data on request. Ease of maintenance. Part Numbers Coupling 14243 Dust Plug 14256 Aluminium main body Viton seal Stainless steel internals
Back 14243 70mm Dry Break Coupler No. Part No. Description Qty. 1 14730 Main Body - 70mm Dry Break Coupler 1 2 14703 Bounce Ring - 70mm D/Break Coupling 1 3 14736 Handle - 70mm Dry Break Coupler 1 4 14733 Guide - 70mm Dry Break Coupler 1 5 14735 Operating Ring Assy. - 70mm Dry Break Coupler 1 6 14732 Poppet - 70mm Dry Break Coupler 1 7 50009 Ball - 6mm Dia SS 32 8 14738 Guide Roller - 70mm Dry Break Coupler 2 9 14739 Roller Shaft - 70mm Dry Break Coupler 3 10 14740 Roller - 70mm Dry Break Coupler 3 11 14749 Outer Body - 70mm Dry Break Coupler (L 100mm) 1 No. Part No. Description Qty. 12 19346 O Ring Vi ton 2-228 HD60 1 13 19345 O Ring Vi ton 2-218 HD60 1 14 19343 O Ring Vi ton 2-222 HD60 1 15 19344 O Ring Viton 2-224 HD60 1 16 14737 Rol Pin - 5x12 1 17 19051 Grubscrew - 304SS - M4 x 8mm 4 18 50196 Nut Dome - M5 St/St 3 19 50197 Seal 1.5" - 70mm Dry Break Coupler 1 20 50195 Spring Washer - M5 St/St 3 21 50084 Grubscrew - M8 x 8mm SS 1
Next 4 Vapor Recovery Adaptor Suitable for vapor recovery duties at depots. Design Benefits Interlock has dust seal on Interlock Plunger. Part Number 14705 Viton seals Aluminium body
Back 14705 4 Vapour Recovery Adaptor No. Part No. Discription Qty. 1 14706 Body - 4" Vapour Recovery Adaptor 1 2 14707 Spider - 4" Vapour Recovery Adaptor 1 3 14808 Poppet Assy - 4" Vapour Recovery Adaptor 1 4 29282 O Ring 2-232 Viton 1 5 14711 Circlip -1300 DIN472-1100 1 6 14655 Teflon Poppet Guide 1 No. Part No. Discription Qty. 7 14807 Spring - 4" Vapour Recovery Adaptor 1 8 14728 Valve Interlock 1 9 14713 1/8 Male Stud 3 10 14714 1/8 Blanking Plug 3 11 50194 Capscrew 303SS M5 x 25mm 2 12 50195 Spring Washer M5 St/St 2
3" Vapor Recovery Coupler Suitable for vapor recovery duties at service stations. Design Benefits Over-centre locking cams. Part Number 14279 High nitrile seals Aluminium body Cam levers Stainless steel
4" Vapor Recovery Coupler Suitable for vapor recovery duties at service stations. Design Benefits Over-centre locking cams. Part Number 14259 High nitrile seals Aluminium body Cam levers Stainless steel
Next 100mm API Dry Break Adaptor The male adaptor has been designed in accordance with the American Petroleum Institute s (API) recommended practice (RP1004) for road tanker bottom loading and discharging. The adaptor is compatible with all 100mm couplers manufactured to the API standard. Design Benefits Wear resistance. Flow balanced for low pressure drops. Flange conforms to 100mm (4-inch) TTMA standard. Flat-bottom design minimises product retention. Brake interlock bosses pre-tapped. Option of mounting on 250mm (10-inch) centres. Spares and seal kit available. Indexable front face. Part Numbers API Adaptor (No Handle) 14232 API Adaptor c/w Handle 14238 Dust Cover - 14234 Hard anodised, heat treated aluminium main body Stainless steel shafts and mechanism Viton GF main seal
Back 14232 API Adaptor (No Handle) No. Part No. Discription Qty. 1 14602 API Poppet Seal 1 2 14601 API Gravity Inner Seal 1 3 14604 Main Body - API Adaptor 1 4 14805 Poppet Assy - API Adaptor 5 14595 Front Ring - API Adaptor Bronze 1 6 14598 Poppet Guide - API Adaptor 1 7 14599 Poppet Inner Spring API Adptor - Stainless Steel 1 8 14600 Poppet Outer Spring API Adptor - Stainless Steel 1 9 14590 Rod Wiper - Plastic 1 10 50006 Capscrew - M6 x 25mm - SS 6 11 50005 Capscrew - M6 x 50mm - SS 2 12 14593 Schnorr Washer - M6 8 13 14675 Gasket - 1OOmm TTMA 1 14238 API Adaptor c/w Handle - No. Part No. Discription Qty. 1 14602 API Poppet Seal 1 2 14601 API Gravity Inner Seal 1 3 14806 Main Body - API Adpt c/w Handel 1 4 14595 Front Ring - API Adaptor Bronze 1 5 14805 Poppet Assy- API Adaptor 1 6 14598 Poppet Guide - API Adaptor 1 7 14599 Poppet Inner SprinQ API Adptor - Stainless Steel 1 8 14600 Poppet Outer Spring API Adptor - Stainless Steel 1 9 14590 Rod Wiper - Plastic 1 10 50006 Capscrew - M6 x 25mm - SS 6 11 50005 Capscrew-M6x50mm-SS 2 12 14593 Schnorr Washer - M6 8 13 14639 Straight Link - API Adaptor 1 14 14640 Bent Link - API Adaptor 1 15 50217 Dowel Pin - 6mmOD x 18mm 1 16 14832 Spacer Small- API Adaptor 1 17 14641 Spacer Big - API Adaptor 2 18 50134 Sellock Pin - M4 x 25mm 1 19 50132 Sellock Pin - M4 x 16mm 2 20 50013 Ball-10mm Dia-SS 1 21 14643 Spring - API Adaptor 1 22 14642 Stop - AP IAdaptor 2 23 50012 Capscrew - M6 x 20mm - SS 1 24 19303 O Ring 2-114 Viton 2 25 14662 Handle c/w Knob - API Adaptor 1 26 14638 Main Shaft - AP IAdaptor 1 27 14675 Gasket - 1OOmm TIMA 1
Next Male Tank Unit 105mm Socket Intended for liquid product transfer, including container and drum filling, and product dosing and mixing systems - available selectively on request to prevent product contamination. Design Benefits Thread BSP. Flange ASA150 Hose and tank unit close automatically on disconnection. Designed in accordance with international standards. Rubber dust cap. Part Numbers Flange Unit - 14230 BSP Unit - 14231 Dust Cap - 14227 Aluminium Viton seals fitted as standard Cast Iron
Back 14230-1 Dry break Adaptor 105mm Flanged/BSP No. Part No. Discription Qty. 1 14588 Main Body DB Adaptor Flanged - Aluminium 1 2 14589 Main Body DB Adaptor BSP - Aluminium 1 3 19314 O Ring 2-227 Viton 1 4 14526 Poppet Assy - DB Adaptor 105mm 1 5 14585 Spring - DB Adaptor Poppet 1 No. Part No. Discription Qty. 6 14655 Teflon Poppet Guide 1 7 50121 Washer Flat - M12 SS 1 8 19336 Nut - 304SS - M12 2 9 14618 Inlet Seal 2,5 DB Coupler - 105mm 1
Male Tank Unit 2 (70mm) Socket Intended for liquid product transfer, including container and drum filling, and product dosing and mixing systems - available selectively on request to prevent product contamination. Design Benefits Thread BSP. Flange ASA150 Hose and tank unit close automatically on disconnection. Designed in accordance with international standards. Rubber dust cap. Part Numbers Flange Unit - 14229 BSP Unit - 14253 Dust Cap - 14255 Aluminium Viton seals fitted as standard Cast Iron
Next Pneumatic Tanker Overfill Sensor The Pneumatic Overfill Sensor shuts down the tanker emergency valves in the event of an overfill. The sensor is designed to be used as part of an integrated pneumatic system, and can be connected to an audible alarm or directly to the load control button. A 300mm senor tube is included as standard and the overfill level can be adjusted within the range, dependant on the recommended tank ullage requirements. Design Benefits Interfaces with pneumatic controller. Suitable for mounting on any PV65-style flange. Adjustable level setting from 75-275mm from the top of the tank. Part Number 14775 Aluminium, stainless steel and brass components Vitron and nitrile seals
Back 14775 Pneumatic Overfill Sensor - Tanker No. Part No. Discription Qty. 1 14776 Body OverfiII Sensor 1 2 14777 Adjustor Housing 1 3 14780 Level Adjustor Assembly 1 4 14798 Bush Centre 1 5 14799 Check Valve Seat 1 6 14782 Exhaust Valve Sleave 1 7 14783 Exhaust Valve Piston 1 8 14784 Manifold Block 1 9 50007 Ball - 2mm Dia SS 1 10 14785 Disc - Lower Diaphragm 1 11 14788 Spring - Level Adjustment 6 12 14789 Spring - Exhaust Valve 2 13 14790 Spring - Check Valve 8 14 19378 O-Ring - 24 x 2.5 1 15 19379 O-Ring - 105 x 3 1 16 19383 O-Ring - 75 x 3 1 17 19384 O-Ring - 20.3 x 2.4 2 No. Part No. Discription Qty. 18 14791 Screw Hex M6 x 20 St.St 2 19 14792 Screw Hex M6 x 40 St.St 2 20 14793 Screw Allen Cap M8 x 25 St.St 3 21 14794 Washer Spring M6 St.St 8 22 14795 Washer Spring M8 St.St 3 23 14786 Overfill Tube Assy 1 24 14803 Diaphragm - Overfill Sensor 1 25 14804 Disc - Upper Diaphragm 1 26 14774 Exhaust Valve Seal 1 27 50010 Ball - 4mm Dia SS 6 28 19385 O Ring - 17 x 3.5 1 29 14747 Check Valve 1 30 14759 Screw Counter Sunk M8 x 25 St.St 1 31 14760 Screw Allen Cap M6 x 35 St.St 4 32 14713 1/8-6 Male Stud 1 33 14714 6mm Blanking Plug 1
Next Pneumatic Tanker Emergency Valve (Bottom Valve) For multi-purpose road tankers equipped with 100mm manifold systems. Valve support on vehicle overfill shutdown systems. Design Benefits Pressure balanced to facilitate manifolding to a single discharge line. Shear groove directly below the sump mounting flange. In the event of an accident the valve will shear off, preventing spillage. Streamlined flow to minimise pressure loss. Wear compensating angled-seal design. Threaded M8 jacking bolt facilities for emergency discharge. Easier pipework through 360 rotation of pneumatic cylinder. Use Pic on presentation, Tanker Equipment, bottom right, in addition to the pic below. The pic below is the best I have. Part Numbers 14257 - Elbow 14258 - Tee Aluminium body and components Hard anodized aluminium wearing components Viton seals supplied as standard
Back 14257/8 Bottom Valve - Elbow/Tee No. Part No. Discription Qty. 1 14766 Body-Tee Pneumatic Bottom Valve 1 1 14750 Body-Elbow Pneumatic Bottom Valve 1 2 14751 Bonnet-Pneumatic Bottom Valve 1 3 14752 Main Poppet-Pneumatic Bottom Valve 1 4 14753 Inner Sleeve-Pneumatic Bottom Valve 1 5 14716 Bottom Valve-Pneumatic Cylinder 1 6 14715 Bottom Valve-Pneumatic Piston 1 7 14754 Poppet Guide Pin-Pneumatic Bottom Valve 1 8 14755 Brass Actuator Rod-Pneumatic Bottom Valve 1 9 14767 Push Rod-Tee 1 9 14756 Push Rod-Elbow 1 10 14757 Main Poppet Plug-Pneumatic Bottom Valve 1 11 14693 Circlip Internal -1300-80 1 12 14525 Bottom Valve Main Spring - Plated 1 13 50135 Wire Bonnet Retainer 1 14 14726 Bottom Valve-Screen Aluminium 1 15 50133 Plain Wire Circlip 3Dia 1 No. Part No. Discription Qty. 16 14725 Bottom Valve-Screen Cover Aluminium 1 17 14761 Screw Hex M10x 15 (Mild Steel Plated) 1 18 14676 Bottom Valve Gasket-Inlet 1 19 14675 Bottom Valve Gasket-Outlet 2 20 19096 M10 Flat Washer (Mild Steel Plated) 1 21 14762 ID 6 X 1.5 O-Ring (Pushrod) Viton 1 22 14763 One Way Flow Restricter Valve 1 23 14764 Red Plug 1 24 14684 Main Seal Viton 1 25 14685 Bottom Valve Large Air Main Seal - Viton 1 26 14686 Bottom Valve Small U-Seal -PK16 Viton 1 27 14687 Bottom Valve Z Seal- GF Viton 1 28 14590 Rod Wiper - Plastic 1 29 14765 Plastic Bolt M8 x 15 1 30 19332 O-Ring 2-642 (Inner Sleeve) Viton 1 31 19333 O-Ring 206-357 (Pneumatic Cylinder) Viton 1 32 19341 O-Ring 206-112 (Brass Actuator Rod) Viton 1
Next 3 Pneumatic Vapour Vent Suited for use on vehicles which have vapour recovery equipment incorporated into their designs. The Pneumatic Vapour Vent can be connected sequentially or individually, and is suitable for fitting to any 3 T.W flange drilling. Design Benefits Slotted holes for easy alignment. Low profile. All-in-one vapour hood and pneumatic vent. Suitable for use as a pneumatic coaming vent. Part Number 14810 Aluminium body (hardened) St/Stl 6p mesh gauze Viton seals
Back 14810 3 Pneumatic Vapour Vent No. Part No. Discription Qty. 1 14720 Cap - Sequential Vapour Vent 1 2 14721 Teflon Sleeve - Sequential Vapour Vent 1 3 14727 Teflon Bush - Sequential Vapour Vent 1 4 14769 Body-Sequential Vapour Vent 1 5 14770 Main Poppet-Sequential Vapour Vent 1 6 14771 Pneumatic Piston-Sequential Vapour Vent 1 7 14772 Plug-Sequential Vapour Vent 1 8 15845 Spring - Sequential Vapour Vent 1 9 15847 Mesh Retaining Cap - Sequential Vapour Vent 1 No. Part No. Discription Qty. 10 14773 Vent - Viton Seal 1 11 19386 CirClip - Din 472 1300-0032 Intemal 1 12 19387 O Ring - 2-020 Viton 2 13 19388 O Ring - 29 x 1,5mm - Viton 2 14 19389 o Ring - 27 x 2,5mm - Viton 1 15 14762 o Ring -10 6 x 1,6mm 1 16 07162 Universal Clamp GS 48 63-89mm 1 17 14713 1/8" - 6 Male Stud 2 18 14714 6mm Blanking Plug 2
Sight Glasses For use on road tankers with manifold compartments. 100mm and 50mm Sight Glasses facilitate the visual inspection of product in the line, thereby reducing the risk that contamination remains undetected. Design Benefits Full-bore glass. Flanged ends. Part Numbers 100mm Sight Glass - 14241 50mm Sight Glass - 14239 Mechanical parts in aluminium and stainless steel Duran Borosilicate glass