More time on the road Illustrated Parts List RTO-090B-AS November 008
Contents How To Use The Illustrated Parts List... AUXILIARY DRIVE GEAR... CASE (AUX)... CASE (FRONT)...7 CONTROLLER ECU & HARNESS...9 COUNTERSHAFT & BRGS (AUX)...0 COUNTERSHAFT ASSY... FILTER REGULATOR... GEAR DISPLAY MODULE... INPUT SHAFT & DRIVE GEAR... INTEGRAL OIL PUMP... KITS & ASSEMBLIES...7 MAINSHAFT & SYNCHRO(AUX)...8 MAINSHAFT ASSY...9 MISCELLANEOUS...0 OIL COOLER... RANGE CYLINDER... REVERSE IDLER... SHIFT BAR HOUSING... SHIFT CONTROLS...6 X-Y SHIFTER MODULE...7 Appendix...8
How To Use The Illustrated Parts List The information contained in this document is subject to frequent updates. Therefore, for the latest information available, please visit the interactive Electronic Parts Catalog at www.roadranger.com/epc. Model Designation or Nomenclature For information regarding Model Designation and Nomenclature, visit www.roadranger.com. Kits and Assemblies (K/A's) Kits and Assemblies contain groups of individual or assembled parts developed for optimal replacement or repair of a service problem. Kits and Assemblies are shown with applicable parts groupings in the parts listings. Identifying Kits and Assemblies A- Part numbers beginning with the letter 'A' are pre-assembled Production Assemblies K- Part numbers beginning with the letter 'K' are kits that are not assembled S- Part numbers beginning with the letter 'S' are pre-assembled Service Assemblies Note: Some Production Assemblies do not begin with a letter prefix (Midrange only). Illustrations Illustrations show parts in assembly groups. Item numbers on illustrations correspond with parts listings on pages adjacent to the illustration. Notes are included on illustrations where additional information is needed. Parts Listing Parts listings are defined by parts groupings and are broken down by service assemblies. Parts listings identify a part for servicing with the following categories Item Number - corresponding with numbers on illlustrations for part identification. Current Part - indentifies part as it is available for service. Description - specifies part name or description. Replaced Part - quantity quantity required for assembly. Quantity - defines unique characteristics or requirements. Notes - indicates Kits or Assemblies that contain a particular part. Kits/Assy's Where Used
Group: AUXILIARY DRIVE GEAR 7 6 080-/9 Aux DG AUXILIARY DRIVE GEAR 676 SNAP RING K-,K- 0 SNAP RING RETAINER K-,K- 668 SNAP RING 6607- BEARING 660,6607 K-,K- BOX 68 BEARING RETAINER 6 X-8-6 CAPSCREW X 8 6 6 /8"-6X" 7 9 AUXILIARY DRIVE GEAR
Group: CASE (AUX) OEM supplied adjustable speedometer sensor (Threaded) OEM supplied non-adjustable speedometer sensor (Non-Threaded) 6 8 7 9 6 0 06-08-0 CASE (AUX) S-0 SPEEDO ROTOR ASSY 0 MAGNETIC 68 -O- RING K-98,S-0,S- 9,S-96 K-98 OIL SEAL KIT 0 0 "FOR MAGNETIC COVER" K-,K- X-8-080M CAPSCREW M8 X. X MM S-9 REAR BEARING COVER ASSY 6 009 GASKET - RED EDGE MOLDED 6 07 GASKET - PURPLE EDGE MOLDED 6967,06,08 RED EDGE MOLDED GASKET - UNCOMPRESSED THICKNESS.0 -.0 - NOT INTERCHANGEABLE WITH ANY OTHER GASKET NON EDGE MOLDED GASKET - UNCOMPRESSED THICKNESS -.0 -.08 - NOT INTERCHANGABLE K-98,K-8,S-9 K-98,K-8 WITH ANY OTHER GASKET 7 X-8L-6 CAPSCREW /8"-6X-/" 7 X-8L-6 CAPSCREW /8"-6X" 8 X-8L-60 CAPSCREW 6 /8"-6X-/" 8 X-8L-6 CAPSCREW /8"-6X" 8 X-8L-66 CAPSCREW X 8 66 /8"-6X-/" 9 00 COVER 6 S-96 0 0978 GASKET 06 K-8,S-96 K-80 SHIM KIT K - 06 K-,K-,S-96 GASKET K-8,S-96 006 REAR HOUSING 08 LIFTING EYE 70 S-96 6 X-8L-600 CAPSCREW 8 /8"-6X" K- SPEED SENSOR KIT A - 698,A - 67 SINGLE PICK-UP ( PIN) K- SPEEDO PLUG KIT 0707 06 SHIELD S-9
6
Group: CASE (FRONT) 7 8 9 0 6 7 8 0 Latest Design 0 * 8 9 7 9 8 0 7 8 * 9 6 00D-08-0 6 9 * Bushing quantity requirements: # Housing Upper bore use #8 / Lower bore use #8677. # Housing Upper bore use #8 and #8677 / Lower bore use #8677. Note: Some part requirements are specific to # or # Aluminum or Iron Clutch Housings and Push or Pull type Clutch. CASE (FRONT) S-996 CASE ASSY 0,0766,S - 989 S-998 CASE ASSY 08,076,S - FOR USE W/INTEGRAL PUMP 07 X--007 PIPE PLUG X 006 00 PLUG 077 -/6" MAGNETIC, O-RING S-996,S-998 INCLUDED USE WITH 0766 CASE X--07 PIPE PLUG X 0,X 06 /" MAGNETIC USE WITH 0 & 08 CASES 00 GASKET 080 K-8 0809 PTO COVER 696,007 6 X-8-7 CAPSCREW X 8 7 8 7/6"-X7/8" 7 0668 GASKET 08 K-8 8 A-7 CLUTCH HOUSING ASSY A - 700 # PUSH-PULL IRON 8 A-7 CLUTCH HOUSING ASSY A - 7,A - 7 # PUSH-PULL IRON 8 A-77 CLUTCH HOUSING ASSY A -,A - 77 # PUSH-PULL ALUM. 8 A-606 CLUTCH HOUSING ASSY A -,A - 770,A - # PUSH-PULL ALUM. 606,A - 606,A - 606 9 X-8L-09 CAPSCREW /6"-8X/" QUANTITY DEPENDENT ON DESIGN 0 06 HAND HOLE COVER # PUSH 0 07 HAND HOLE COVER # PULL 0 00 HAND HOLE COVER # PULL 0 0 HAND HOLE COVER 6 # PUSH 0708 STUD 966 6 X-0-00 WASHER X 000,X0 000 6. X 6.60,X0 00 X--00 NUT X 000 6 /8"-8 00 FRONT BRG COVER " PULL K-68 7
X-8L-60 CAPSCREW 6 /8"-6X-/" 6 09 FRONT BRG COVER " PUSH 7 GASKET K-8 8 8 BUSHING FOR # HOUSING UPPER A-7,A-7,A- 77,A-606,K-68 8 8 BUSHING FOR # HOUSING UPPER A-7,A-7,A- 77,A-606,K-68 8 8677 BUSHING FOR # HOUSING UPPER A-7,A-7,A- 77,A-606 9 8677 BUSHING FOR # AND # HOUSING LOWER A-7,A-7,A- 77,A-606 0 X-8C-8 CAPSCREW X 8 8,X 8L 8 /- X -/ - FOR IRON HOUSING 0 X-8C-86 CAPSCREW 6,X 8 809,X 8L 809,X 8L 86 /- X -7/6 - FOR IRON HOUSING 0 X-8C-86 CAPSCREW 6,X 8 809,X 8L 809,X 8L 86 /- X -7/6 - FOR ALUMINUM HOUSING 00 PLUG 077 -/6" MAGNETIC, O-RING S-996,S-998 INCLUDED X-8-686 CAPSCREW 6 /8"-6X/" 7 PTO COVER 0 009 GASKET 68 K-8 070 HEX HEAD PLUG S-996,S-998 7 7 MAGNET S-996,S-998 8 88 PIN 9 X--00 NUT X 000 /8"-8 0 X-0-00 WASHER X 000,X0 000. X 6.60,X0 00 STUD 6,679 /8" X -/6" 6 0 PLUG 7 7 X-8-00 CAPSCREW /8"-X-/" 8 08 SPACER 9 X--80 PIPE PLUG X 800 /" 0 X--07 PIPE PLUG X 0,X 06 /" MAGNETIC 697 PIN S-996,S-998 8
Group: CONTROLLER ECU & HARNESS 0 9 Range Solenoid A Shift Bar Housing Speed Sensor B Shift Bar Housing Speed Sensor Splitter Solenoid (8 Speeds Only) Blank Rear Bearing Cover 8 6 7 09-0-0 CONTROLLER ECU & HARNESS 00 BRACKET 98 TY-RAP 8 K-7,K-68 067 MOUNTING PAD 078 DOWEL PIN S-90 K-RX REMAN EXCHANGE K-, K-R TRANSMISSION CONTROLLER KIT 6 069 SLEEVE 7 0 WASHER 8 X-8- SCREW /6"-8X-/" 9 K-68 RANGE/SPLITTER VALVE 680,680,K - KIT 907 0 K-908 -O- RING KIT FOR SOLENOID VALVE X-8-6 HEX FLANGE HEAD X 8 9 #0- X / SCREW X--0 LOCKWASHER #0 PLAIN K-7 TRANSMISSION HARNESS KIT 6966 9
Group: COUNTERSHAFT & BRGS (AUX) 00-/9 Aux CS Helical COUNTERSHAFT & BRGS (AUX) 007- BEARING,007 K-,K- BOX A-68 WELDED A - 66 C/S 009 - D/G 60 COUNTERSHAFT ASSY SPACER 0
Group: COUNTERSHAFT ASSY 9 8 7 0 6 0-/9 CS/RT COUNTERSHAFT ASSY 7 SNAP RING K-,K- 66 BEARING K-,K- 06 CNTRSHFT-W/REV & ST 069 X-6-E KEY 6 ROLL PIN 6 080 KEY 967 7 06076 ND GEAR-CNTRSHFT 97,07 8 08 RD GEAR-CNTRSHFT 96 9 066 OD GEAR-CNTRSHFT 96,96,08,0,09 0 9 PTO GEAR - LOWER 0 080 PTO GEAR - UPPER 9 067 DRIVE GEAR-CNTRSHFT 90,9,09,0087,00 998 SNAP RING 099 BEARING 0677 098 K-,K- 060 RETAINER 98 ROLL PIN NO LONGER REQUIRED X-7-00 CAPSCREW /8"-8X-/"
Group: FILTER REGULATOR NSS -O- Ring/Element Kit 0--9 AFR/AS NSS - Not Sold Separately FILTER REGULATOR K-70 FILTER REG KIT A - K-698 -O- RING/ELEMENT KIT FOR FILTER REGULATOR X-8C- CAPSCREW X 8S /"-0X-/" -O- RING K-70,K-6 X--08 PIPE PLUG /8" NPT
Group: GEAR DISPLAY MODULE 07-0-0 GEAR DISPLAY MODULE K-99 DRIVER DISPLAY MODULE 060
Group: INPUT SHAFT & DRIVE GEAR 9 6 8 * * 070-/9 IS * For Shipping Only -- Do Not Replace INPUT SHAFT & DRIVE GEAR 9 SHIPPING SEAL NOT SOLD FOR SERVICE 6980 SNAP RING K-68,K- 80 BEARING K-68,K-,K- 66 SPACER 70 SNAP RING K-68,K-,K- 6 069 MAIN DRIVE GEAR 00,0086,08 8 S-69 INPUT SHAFT 0 66 066 " PULL - USE W/FBC 00 K-68,K- 8 S-660 INPUT SHAFT 06,67 " PUSH - USE W/FBC 09 9 666 BUSHING K-,S-69,S-660
Group: INTEGRAL OIL PUMP Indicates part of item 999 9 7 6 9 8 6 7 6 0 7 8 09--97 Oil Pump INTEGRAL OIL PUMP X-8C-09 CAPSCREW /"-0X/8" K-0 COVER & SCREW KIT 0,007 0 GASKET K-0 08 PLUG 76 -O- RING K-8 6 X-8-8 SCREW X 8 /"-0X-/" 7 08 WASHER K-67 8 08 DOWEL PIN 9 077 RETAINER 0 K-67 OIL PUMP KIT 089,098,0776,09,07 A - 696,A - 77 K-67 OIL PUMP KIT 089,098,0776,09,07 A - 696,A - 77 009 KEY 8 SNAP RING 077 PUMP DRIVE GEAR 0880 K-67 OIL PUMP KIT 089,098,0776,09,07 A - 696,A - 77 6 X--700 STEEL BALL 7/6" 7 077 SPRING 8 07 SUCTION TUBE 068 O-RING INCLUDED ON SUCTION K-67 TUBE 9 069 PLUG 0668 GASKET 08 K-8
S-998 CASE ASSY 08,076,S - FOR USE W/INTEGRAL PUMP 07 7 MAGNET S-996,S-998 6 X-8-7 SCREW 7 0 -O- RING 999 K-67 OIL PUMP KIT 089,098,0776,09,07 A - 696,A - 77 6
KITS & ASSEMBLIES K-698 -O- RING/ELEMENT KIT FOR FILTER REGULATOR K-96 COOLER INSTLN KIT K-70 FILTER REG KIT A - K-0 COVER & SCREW KIT 0,007 K-68 CLUTCH INSTALLATION KIT FOR USE WITH S-69 INPUT SHAFT ASSY AND 80 INPUT SHAFT BEARING K-80 SHIM KIT K - 06 K-,K-,S-96 K-908 -O- RING KIT FOR SOLENOID VALVE K-98 OIL SEAL KIT 0 0 "FOR MAGNETIC COVER" K-,K- K-9 COUNTERSHAFT REPL 0,0 KIT K- SPEED SENSOR KIT A - 698,A - 67 SINGLE PICK-UP ( PIN) K-6 RANGE CYL COVER KIT 69 K-67 OIL PUMP KIT 089,098,0776,09,07 A - 696,A - 77 K-6 XY SHIFTER KIT 698,A - 70 K-8 POSITION SENSOR KIT 69,6996 K-RX REMAN EXCHANGE TRANSMISSION CONTROLLER KIT K-, K-R K-8 O-RING KIT - RANGE K-,K- K-9 SYNCHRONIZER KIT K - 6 K-9 SYNCHRONIZER REPLACEMENT KIT K - 8 SLIDING CLUTCH INCLUDED IN KIT K-8 GASKET KIT K-,K- K- BASIC REBUILD KIT K- SPEEDO PLUG KIT 0707 K- BASIC OVERHAUL KIT K-7 TRANSMISSION 6966 HARNESS KIT K-6 OIL SEAL TOOL KIT K-680 COBRA SHIFT LEVER KIT A - 78 (LEFT HAND DRIVE) K-68 RANGE/SPLITTER VALVE 680,680,K - KIT 907 S-0 OIL FILTER 78 S-69 INPUT SHAFT 0 66 066 " PULL - USE W/FBC 00 K-68,K- S-660 INPUT SHAFT 06,67 " PUSH - USE W/FBC 09 S-0 SPEEDO ROTOR ASSY 0 MAGNETIC S-688 MAINSHAFT ASSY 00,09 S-90 SHIFT BAR HOUSING 69 COMPLETE ASSY S-9 REAR BEARING COVER 6967,06 ASSY,08 S-9 SHIFT BAR HOUSING ASSY 69 HOUSING ONLY (DOES NOT INCLUDE SPEED SENSORS) S-96 RANGE SECTION ASSY "B" RATIO S-989 PUSHBUTTON S - 98 ASSEMBLY S-990 PUSHBUTTON FOR USE WITH REMOTE LEVER ASSEMBLY S-996 CASE ASSY 0,0766,S - 989 S-998 CASE ASSY 08,076,S - 07 FOR USE W/INTEGRAL PUMP 7
Group: MAINSHAFT & SYNCHRO(AUX) 8 7 Universal Joint Yoke 0 0A-0-0 MAINSHAFT & SYNCHRO(AUX) 897 SPRING K-9,K-9,K-,K- A-7 SYNCHRONIZER ASSY 096 097 A - HI RANGE K-9,K-9 97 0 SLIDING CLUTCH K-9 A-7 SYNCHRONIZER A - 97 A - 876 LO RANGE K-9,K-9 ASSEMBLY 076 AUXILIARY MAINSHAFT 7 899 WASHER 8 009 REDUCTION GEAR 66 0 898 SPACER 60- BEARING 60 K-,K- BOX 0 NUT 8
Group: MAINSHAFT ASSY 9 7 0 9 8 7 6 07B-0-96 MAINSHAFT ASSY S-688 MAINSHAFT ASSY 00,09 60 ROLL PIN S-688 06 -SIDED KEY 00890 70 SNAP RING K-68,K-,K- 6 REVERSE GEAR- MAINSHAFT 6 79 SPACER 7 0997 SLIDING CLUTCH 007 K- 8 060 ST GEAR-MAINSHAFT 068 9 060 WASHER 097 0 077 ND GEAR-MAINSHAFT 0 08 RD GEAR-MAINSHAFT 08 08 OD GEAR-MAINSHAFT 08,08 0080 WASHER.-BLUE 098 WASHER 0996 SLIDING CLUTCH 699 9
MISCELLANEOUS 8660 SHIFT DIAGRAM LABEL S-989 70 SILICONE LUBE 8 OZ (6.9 CC)-FLEET SIZE 70 ADHESIVE SEALANT 0. CC (SINGLE APPLICATION SIZE) 70 SEALANT CC (SINGLE APPLICATION SIZE) K- 706 SILICONE LUBE CC (SINGLE APPLICATION SIZE) K-8 0
Group: OIL COOLER 6 7 Flow 7 6 8 9 7 6 Oil Return 6 7 0 Oil Pump Outlet * *6 Outlet * Fuller 77 *6 Inlet * Return Outlet 0-/9 Cooler *Adding Oil Filter and parts as shown is optional. Return / Outlet Location OIL COOLER 80 OIL COOLER K-96 9 HOSE FEET K-96 X-8- CAPSCREW /6"-6X-/" X--06 LOCKWASHER /6" 8 BRACKET K-96 6 99 CONNECTOR 6 K-96,S-0 7 9 SWIVEL K-96 8 X-0-0 WASHER /6" 9 809 PLUG-RUBBER MOUNT K-96 0 790 STRAP 8 K-96 9 CLAMP K-96 80 NUT K-96 9 ELBOW K-96 S-0 OIL FILTER 78 77 FILTER ELEMENT S-0
Group: RANGE CYLINDER 6 9 0 7 8 09-0-0 RANGE CYLINDER A-7 SHIFT YOKE ASSY 7 GASKET K-8 698 RANGE CYLINDER 76 -O- RING K-8 PISTON 6 -O- RING K-8 7 -O- RING K-8 8 X--00 NUT /8"-8 9 699 GASKET 690 K-6,K-8,K-8 0 K-6 RANGE CYL COVER KIT 69 X-8-67 CAPSCREW /8"-6X-/" X-8L-60 CAPSCREW /8"-6X" X--600 LOCKWASHER /8" X--08 PIPE PLUG /8" NPT
Group: REVERSE IDLER 9 8 8 Latest Design 6 7 8--97 RI REVERSE IDLER X-7-008 CAPSCREW /8"-8X-/ 8 WASHER 098 WASHER 8 K-09,S-996,S-998 87 BEARING 000 K-,K- 677 REVERSE IDLER GEAR 09 6 K-09 IDLER SHAFT REPL KIT 60,098,0 7 06 RETAINING RING K-09 8 06 RETAINING RING K-09 9 0 IDLER SHAFT K-09
Group: SHIFT BAR HOUSING 9 0 9 0 7 8 8 7 6 6 6 7 6 8 7 8 0 6 999 6 6 7 8 6 6 0 6 9 0-0-0 SHIFT BAR HOUSING S-9 SHIFT BAR HOUSING ASSY 69 HOUSING ONLY (DOES NOT INCLUDE SPEED SENSORS) 0676 GASKET 98 K-8,S-90,S-9 0070 OIL TROUGH S-90 0 AIR VALVE SHAFT 777 S-90 6 X-8- CAPSCREW /"-0X/" 7 X--60 PIPE PLUG X 60 /8" NPT 8 078 DOWEL PIN S-90 0 966 PLUNGER 07 SPRING 779 GASKET S-90,S-9 06 PLUG 778 S-90,S-9 9 NEUTRAL LIGHT SWITCH 69 SWITCH NORMALLY CLOSED 08 LIFTING EYE 70 S-96 6 X-8L-60 CAPSCREW /8"-6X-/" 6 X-8L-60 CAPSCREW 6 /8"-6X-/"- OR USE PCS OF X- 8L-60 WITH PCS OF X-8L-60 7 899 PIN 8 900 GASKET S-90,S-9 9 90 REVERSE LIGHT SWITCH 680 SWITCH NORMALLY OPEN 0 066 PLUG 97 S-90,S-9 6966 COMPRESSION SPRING S-90 X--800 STEEL BALL /" 697 SHIFT YOKE 076 REVERSE/ST S-90 X--00 STEEL BALL /" 68 SHIFT BLOCK ND/RD S-90 6 0 LOCKSCREW S-90 7 6 INTERLOCK PIN S-90 8 69 SHIFT BLOCK TH/TH S-90 9 6960 SHIFT YOKE 0 TH/TH S-90
0 066 YOKE BAR TH/TH S-90 69600 SHIFT YOKE 099 ND/RD S-90 06 YOKE BAR ND/RD S-90 06 YOKE BAR REVERSE/ST S-90 K- SPEED SENSOR KIT A - 698,A - 67 SINGLE PICK-UP ( PIN) -O- RING S-90 6 X-8C-09 CAPSCREW /"-0X/8" 7 066 PLUG 97 S-90,S-9 8 900 GASKET S-90,S-9 999 S-90 SHIFT BAR HOUSING ASSY 69 COMPLETE
Group: SHIFT CONTROLS VOLUME CONTROL R N SERVICE D SHIFT MANUAL EATON FULLER TRANSMISSIONS LOW PUSHBUTTON ASSEMBLY COBRA LEVER 009B-0-07 COBRA RETROFIT ASSEMBLIES SHIFT CONTROLS S-989 PUSHBUTTON S - 98 ASSEMBLY S-990 PUSHBUTTON FOR USE WITH REMOTE LEVER ASSEMBLY K-680 COBRA SHIFT LEVER KIT 07 (LEFT HAND DRIVE) S-987 COBRA RETROFIT ASSEMBLY AUTOSHIFT (LEFT HAND DRIVE) COBRA LEVER & SHIFT TOWER ASSY, NARROW BASE W/TONE S-997 COBRA RETROFIT ASSEMBLY 00 SHIFT LEVER POSITION STRIP 0 SHIFT LEVER KNOB DECAL AND HARNESS AUTOSHIFT (RIGHT HAND DRIVE) COBRA LEVER & SHIFT TOWER ASSY, NARROW BASE W/TONE AND HARNESS 6
Group: X-Y SHIFTER MODULE Items not included in 999 999 09-0-0 X-Y SHIFTER MODULE 0 GASKET 098 K-6 X-8C-6 CAPSCREW 060 BREATHER 60 /" NPT 98 TY-RAP K-7,K-68 K-8 POSITION SENSOR KIT 69,6996 999 K-6 XY SHIFTER KIT 698,A - 70 7
Appendix Air Line Tubing Choosing nylon tubing for air lines Use the following chart to specify the Eaton Fuller nylon tube appropriate to your vehicle's air system. /" Air Line and Harness Combinations Line Type Line Color Order Part No. Length Supply + Port Red (S) + Black (P) 60 0 ft Splitter + Deep Reduction Blue (SP) + Green (H/L) 70 0 ft Supply + Splitter + Port Red(S)+Blue(SP)+ Black(P) 760 0 ft /" Air Lines Line Type Line Color Order Part No. Length Supply Red (S) 70 0 ft Port Black (P) 70 0 ft Splitter Blue (SP) 770 0 ft Deep Reduction Green (H/L) 70 0 ft Sheathing 800 0 ft /8" Air Lines Line Type Line Color Order Part No. Length Supply White 686 0 ft Port Black 80 0 ft Sheathing 80000 0 ft 060-/9 AL Chart 8
9
Copyright Eaton Corporation and Dana Limited, 008. Eaton and Dana hereby grant their customers, vendors, or distributors permission to freely copy, reproduce and/or distribute this document in printed format. It may be copied only in its entirety without any changes or modifications. THIS INFORMATION IS NOT INTENDED FOR SALE OR RESALE, AND THIS NOTICE MUST REMAIN ON ALL COPIES. For spec ing or service assistance, call -800-86-HELP (7) hours a day, 7 days a week (Mexico 00-800-86-7), for more time on the road. Or visit our web site at www.roadranger.com. 0 008 Eaton Corporation All rights reserved. Roadranger: Eaton, Dana and other trusted partners providing the best products and services in the industry, ensuring more time on the road. Eaton Corporation Truck Components Operations P.O. Box 0 Kalamazoo, MI 900 U.S.A. www.roadranger.com