Special automotive tools 1

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com Special automotive tools 1 Products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm 5 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com STAHWIE special-purpose tools for the automotive industry Together with leading automotive manufacturers, STAHWIE develops specialpurpose tools and brand-specific sets of tools. This continuous development and enhancement process covering tools for production and workshops ensures that the tools we make keep pace with the latest developments in the industry. Tidy tool management: STAHWIE tool sets for car repairs Carefully selected suites of tools for Tool trolleys and Tool boxes ensure optimised workflows. Whether it is in the garage, in production or in the pits, many mechanics welcome the benefits afforded by model and marque specific tools to guarantee safe, timesaving work. A key factor: Special crow-foot spanners Special-purpose tools for individual vehicle models are part of the STAHWIE tradition. This combined tool with interchangeable crow-feet for three different sizes is ideal for setting valves and the idle stop on injection pumps. Problem solver: STAHWIE specialpurpose car pliers Often enough, corroded or jammed parts in hard-to-reach places slow down repair and servicing jobs in the engine space. With diesels, this includes the heater plug sockets. STAHWIE heater plug socket pliers make it that much easier to remove and refit these plug sockets, especially when the engine is still hot. 262 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com Better safe than sorry: STAHWIE sockets It would be hard to imagine garage and production environments without compressed air tools. Hardly surprising, then, that STAHWIE offer such a wide range of tried-andtested, job-specific sockets, e. g. the wheel-nut socket with the closely-fitting plastic sleeve. The specialists: STAHWIE KABEEX Efficiency and economy in the workplace at a time when it pays to be competitive, removing cables on vehicles safely and quickly gives you that advantage. This is why STAHWIE offers over 40 different cable removing tools for cars. They are available individually, in carefully selected sets or as special sets for specific vehicles. The fine but highly resistant blades are made of chrome vanadium and special spring steel. A question of torque: Friction gauge Setting steering systems accurately is a critical job and adhering to torque settings and coefficients of friction is a crucial part of it. This is what STAHWIE created the easily-operated Friction gauge No 73Nm/15 with a range of 2 15 N m. This prevents damage to wheel bolts, wheel nuts and the bolt holes especially on alloy wheels. Unbreakable: Special tools for car glass The professionals really appreciate STAHWIE products for quickly and accurately removing and fitting car glass. Twin suction lifters and a three-component glass removal set ensure that windscreens and other car glass are easily and safely removed, fitted and transported. Thick or thin: Measuring the thickness of brake discs Checking the state of the brake discs is a valuable contribution to safety on the roads. STAHWIE offers a vernier calliper which enables the garage to easily check the discs in situ and compare the dimensions with the manufacturers instructions. 263 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

% Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com STAHWIE KABEEX Protect For workshops and cable configuration (Kabelex table see page 304) D Bicoloured handle: - with locking blade cover, to protect the fine blade and guard against injury. - easier to handle for fine and intricate work on miniature connectors. D eleases cable connectors quickly and easily without cutting them off saves time and money. D Completely reviewed series, also available in carefully selected sets. D Special sets for vehicle makes: BMW, Mercedes-Benz, Opel, VW/Audi/Seat/Skoda/Porsche, MAN/Volvo and enault/psa D Over 40 different cable extractors available. D Blades made of extremely tough and durable chrome vanadium and special spring steel. 15 VW/Audi Tool set KABEEX 11 pieces, for VW/Audi, Seat, Skoda, Porsche. Content: No 1501, 1502: ejection tools for contact sizes O 1.5 and 3.5 mm No 1511, 1512: dismantling sleeves for contact sizes O 1.5 and 3.5 mm No 1553, 1557, 1558, 1591: cable extractor tools for contact sizes y 2.8; 4.8 and 5.8 mm No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm No 1556-1: cable extractor tool for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels y 0.64 mm No 1574: cable extractor tool for Micro Timer I contacts y 1.6 mm 1520 Mercedes- Benz Tool set KABEEX 16 pieces, for Mercedes-Benz. Content: No 1501, 1504, 1508: ejection tools for contact sizes O 1.5 and 2.5 mm No 1511, 1514, 1518: dismantling sleeves for contact sizes O 1.5 and 2.5 mm No 1553, 1591: cable extractor tools for contact sizes y 2.8 and 5.8 mm No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm No 1559: cable extractor tool for Maxi-Power Timer contacts y 9.5 mm No 1578K-1: cable extractor tools for SK contacts (primary) y 2.8 mm No 1578K-2: cable extractor tool for SK contacts 97 (primary and secondary) y 2.8 mm No 1584, 1585: cable extractor tools for soldered contacts with contact O 2.5 and 4.0 mm No 1587: cable extractor tool for flat plug-in sockets, E-95 contacts y 1.65 mm No 1589K: cable extractor tool for flat plug-in sockets, SK contacts y 8mm 96746204 2040 1 535.70 1550 BMW Tool set KABEEX 13 pieces, for BMW. Content: No 1501, 1502, 1504, 1508: ejection tools for contact sizes O 1.5; 3.5 and 2.5 mm No 1511, 1512, 1514, 1518: dismantling sleeves for contact sizes O 1.5; 3.5 and 2.5 mm No 1553: cable extractor for plugs with single release channel y 2.8 mm and 5.8 mm No 1578K-1: cable extractor for SK contacts (primary) y 2.8 mm No 1578K-2: cable extractor for SK contacts 97 (primary and secondary) y 2.8 mm No 1591: cable extractor tool for contact sizes y 2.8 and 5.8 mm No 1589K: cable extractor tool for flat plug-in sockets, SK contacts y 8mm 96746207 1795 1 377.80 96746203 70 1 384.15 264 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com % 1700 MAN/Volvo Tool set KABEEX 14 pieces, for MAN/Volvo, Mercedes-Benz trucks. Content: No 1501, 1502, 1503, 1506: ejection tools for contact sizes O 1.5; 3.5; 4.0 (ABS) and 4.0 mm No 1511, 1512, 1513, 1516: dismantling sleeves for contact sizes O 1.5; 3.5; 4.0 (ABS) and 4.0 mm No 1523: assembly sleeve (ABS) No 1553, 1591: cable extractor tools for contact sizes y 2.8 and 5.8 mm No 1576: cable extractor tool for flat plugs without box y 2.8 mm No 1577: cable extractor tool for VK Box contacts y No 1577-1: cable extractor tools for MK/MKS contacts y 1.5 mm 96746208 1815 1 452.50 1720 enault/psa Tool set KABEEX 7 pieces, for enault/psa (Citroën and Peugeot). Content: No 1505: ejection tool for contact sizes O 2.3 mm No 1515: dismantling sleeve for contact sizes O 2.3 mm No 1553, 1554, 1591: cable extractor tools for contact sizes y 2.8 and 5.8 mm No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm No 1574: cable extractor tool for Micro-Timer I contacts y 1.6 mm 967462 670 1 220.00 1560 Tool set KABEEX pieces, for round plug connections (incl. ABS). Content: 1 each No 1501: ejection tool for contact sizes O 1.5 mm 1 each No 1502: ejection tool for contact sizes O 3.5 mm 1 each No 1503: ejection tool for contact sizes O 4.0 mm assembly or dismantling sleeve (ABS) 2 each No 1511: dismantling sleeves for contact sizes O 1.5 mm (1 each mounted) 2 each No 1512: dismantling sleeves for contact sizes O 3.5 mm (1 each mounted) 2 each No 1513: dismantling sleeves for contact sizes O 4.0 mm (1 each mounted) 1 each No 1523: assembly sleeve (ABS) 1570/1 Basic set KABEEX 6 pieces. Content: No 1501, 1502: ejection tools for contact sizes O 1.5 and 3.5 mm No 1511, 1512: dismantling sleeves for contact sizes O 1.5 and 3.5 mm No 1553, 1591: cable extractor tools for contact sizes y 2.8 and 5.8 mm 96746303 7 1 162.65 1570/2 Universal set KABEEX 12 pieces. Content: No 1501, 1502, 1505: ejection tools for contact sizes O 1.5; 3.5; 2.3 mm No 1511, 1512, 1515: dismantling sleeves for contact sizes O 1.5; 3.5; 2.3 mm No 1553: cable extractor tool for plugs with one release channel y 2.8 and 5.8 mm No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm No 1559: cable extractor tool for Maxi-Power Timer contacts y 9.5 mm No 1562: cable extractor tool for Pit-Pod contacts No 1574: cable extractor tool for Micro-Timer I contacts and ABS plug-in housing y 1.6 mm No 1591: cable extractor tool for plugs with two release channels y 2.8 and 5.8 mm 96746304 1130 1 361.80 1590 Tool set KABEEX 5 pieces, for flat plug-in sockets. Content: No 1551, 1552: cable extractor tools for flat plug-in sockets y 2.8 and 5.8 mm in terminals with double release channel No 1553, 1554, 1555: cable extractor tools for contact sizes y 2.8 and 5.8 mm in terminals with single release channel 96746202 360 1 137.95 96746201 520 1 153.35 265 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

% Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 1501 1508 for round snap-in receptacles, including dismantling sleeve. Ejection tools KABEEX for contact sizes Code No O mm g S 96746230 1501 + 1511 (e.g. BMW, Mercedes- Benz, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi) 1.5 37 1 33.40 96746231 1502 + 1512 (e.g. BMW, Mercedes- Benz, Fiat, MAN, Opel, Porsche, Seat, Skoda, VW/Audi) 3.5 59 1 36.80 96746232 1503 + 1513 for ABS (trucks) or assembly sleeve No 1523 (e.g. Mercedes-Benz, MAN, Scania) 4.0 79 1 49.15 96746233 1504 + 1514 (e.g. BMW, Mercedes- Benz, Opel) 2.5 60 1 38.35 1 96746234 1505 + 1515 (e.g. Ford, Opel, PSA, enault) 2.3 46 1 33.95 96746235 1506 + 1516 (e.g. Mercedes-Benz trucks, MAN, Scania) 4.0 72 1 49.40 96746236 1507 + 1517 (e.g. Scania gears GS 900) 1.5 72 1 40.65 96746037 1508 + 1518 (e.g. BMW, Mercedes- Benz) 1.5 46 1 48.30 1511 1518 Dismantling sleeves KABEEX for contact sizes inside outside Code No O mm mm O mm O mm g S 78600001 1511 for No 1501 1.5 30 2.9 3.3 1 1.80 78600002 1512 for No 1502 3.5 30 4.4 5.0 1 2.00 78600003 1513 for No 1503 4.0 45 6.0 6.5 1 2.55 78600004 1514 for No 1504 2.5 30 4.0 4.4 1 2.45 1 78600005 1515 for No 1505 2.3 35 3.0 3.3 1 2.35 78600006 1516 for No 1506 (for MOEX contacts 4.0 mm ) 4.0 35 5.6 6.0 1 2.80 78600016 1516-A for No 1506 (for AMP contacts 4.0 mm) 4.0 30 5.4 5.8 1 2.80 78600007 1517 for No 1507 1.5 26 2.3 2.8 1 2.55 1 78600018 1518 for No 1508 (3 x 120 slotted) 1.5 32 2.7 3.5 1 5 9.00 1523 for No 1503 Assembly sleeve KABEEX ABS for contact sizes inside outside Code O mm mm O mm O mm g S 786001 4.0 50 4.0 6.5 5 3.90 1551/1552 for flat snap-in receptacles e.g. BMW, Ford, Opel, Porsche, Seat, Skoda, VW/Audi. Cable extractor tools KABEEX for contact sizes Code No y mm g S 74620001 1551 2.8 19 1 31.90 74640002 1552 5.8 19 1 33.00 1553 1555 for flat plug-in sockets locked in terminals with single release channel. Cable extractor tools KABEEX for contact sizes Code No y mm g S 74620003 1553 (e.g. BMW, Mercedes-Benz, Ford, MAN, Opel, Porsche, PSA, enault, Seat, Skoda, VW/Audi) 2.8; 5.8 16 1 18.60 74620004 1554 (e.g. BMW, PSA, enault) 2.8 16 1 18.30 74620005 1555 (e.g. BMW) 5.8 16 1 19.40 1556 for flat plug-in sockets, Micro Timer II, III contacts, e.g. Mercedes-Benz, Opel, Porsche, PSA, enault, Saab, Seat, Skoda, VW/Audi. Cable extractor tool KABEEX for contact sizes Code y mm g S 74620006 1.6 17 1 52.50 1556-1 for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Seat, Skoda, VW/Audi. Cable extractor tool KABEEX for contact sizes Code y mm g S 74612006 0.64 19 1 55.50 1557/1558 for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Seat, Skoda, VW/Audi. Cable extractor tools KABEEX for contact sizes Code No y mm g S 74620007 1557 2.8 21 1 43.50 74620008 1558 4.8 22 1 45.60 1559 for flat plug-in sockets, Maxi Power Timer contacts, Mercedes-Benz, VW/Audi. Cable extractor tool KABEEX for contact sizes Code y mm g S 74620009 9.5 39 1 46.60 1562 for flat plug-in sockets, Pit-Pod contacts, all vehicle makes. Cable extractor tool KABEEX for contact sizes Code y mm g S 74620012 various 25 1 41.70 266 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com % 1563/1564 for flat plug-in sockets, Ducon contacts in terminals with single release channel, Opel. Cable extractor tools KABEEX for contact sizes Code No y mm g S 74620013 1563* 0.8 15 1 27.30 74620014 1564* 1.5 19 1 28. * to be discontinued 1565 1568 for flat plug-in sockets, Ducon-contacts in terminals with two release channels, Opel. Cable extractor tools KABEEX for contact sizes Code No y mm g S 74620015 1565* 1.5 18 1 32.20 74620016 1566* 2.8 19 1 32.80 74620017 1567* 4.8; 6.3 22 1 33. 74620018 1568* 9.5 45 1 30.40 * to be discontinued 1572 for flat plug-in sockets with asymmetrically positioned latches in terminals with two release channels, Ford, enault. Cable extractor tool KABEEX for contact sizes Code y mm g S 74620022 2.8 18 1 48.50 1574 for flat plug-in sockets, Micro-Timer I contacts and ABS plug-in housing, Fiat, Ford, Mazda, Opel, PSA, enault, Saab, VW/Audi. Cable extractor tool KABEEX for contact sizes Code y mm g S 74620024 1.6 15 1 22.80 1575 for round soldered pin contacts, Ford, for flat plug-in sockets (retention by locking device on terminal), Fiat, Mazda, Toyota. Cable extractor tool KABEEX for contact sizes for contact sizes Code O mm y mm g S 74620025 1.5 2.8; 5.8 15 1 18.00 1576 for flat plug-in sockets with single latch (flat plug without box), e.g. MAN. Cable extractor tool KABEEX 1577 for flat plug-in sockets, VK Box contacts, e.g. MAN. Cable extractor tool KABEEX 74620027 49 1 66.50 1577-1 for flat plug-in sockets, MK/MKS contacts, e.g. MAN/Volvo. Cable extractor tool KABEEX for contact sizes Code y mm g S 74615027 1.5 23 1 60.00 1578K-1 for flat plug-in sockets, SK contacts (primary), e.g. BMW, Mercedes-Benz. Cable extractor tool KABEEX for contact sizes Code y mm g S 746028 2.8 35 1 35.30 1578K-2 for flat plug-in sockets, SK contacts 97 (primary, secondary), e.g. BMW, Mercedes-Benz. Cable extractor tool KABEEX for contact sizes Code y mm g S 74612028 2.8 35 1 47.30 1584/1585 for round soldered contacts, Mercedes-Benz. Cable extractor tools KABEEX for contact sizes Code No O mm g S 74620034 1584 4.0 13 1 20.70 74620035 1585 2.5 11 1 20.30 1587 for flat plug-in sockets, E-95 contacts, Mercedes-Benz. Cable extractor tool KABEEX for contact sizes Code y mm g S 74620037 1.65 23 1 54.50 for contact sizes Code y mm g S 74620026 2.8 18 1 43.50 267 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

%$ Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 1588* for GSK flat fuse contacts (1, 2 and 3 terminal version; 2, 4 and 6 latches), Mercedes-Benz. Cable extractor tool KABEEX 775 Dinging hammer 746038 23 1 48.00 * to be discontinued 1589K for flat plug-in sockets, SK contacts, e.g. BMW, Mercedes-Benz. Cable extractor tool KABEEX for contact sizes Code y mm g S 746039 8 45 1 35.50 1591 Cable extractor tool KABEEX for flat plug-in sockets in terminals with two release channels, Junior Power Timer contacts, Standard Power Timer contacts, e.g. BMW, Mercedes-Benz, Fiat, Ford, MAN, Opel, PSA, enault, Saab, VW/Audi. O 1 2 Code mm mm mm g S 70130002 30/40 300 155 516 2 36.70 776 large extra thin faces, square face chequered. Special planishing hammer O u 1 2 Code mm mm mm mm g S 701300 46 40 320 115 521 2 71.00 780 short. Planishing hammer for contact sizes Code y mm g S 74620041 2.8; 5.8 25 1 56.00 $ 980 Car body repair tools and pullers Panel beating set 7 pieces, in steel case. Content: Hammers: No 785; 790; Dollies: No 838; 841; 861; 865; Pliers: No 935 O u 1 2 Code mm mm mm mm g S 70130003 32 25 300 0 346 2 32.30 785 short, round face chequered. Planishing hammer O u 1 2 Code mm mm mm mm g S 70130004 40 35 300 96 484 2 50.50 790 with round face and ball pein. Pecking hammer Code kg S 98812001 7.35 1 272.40 998 Panel beating set 17 pieces, in steel case No 83/09. Content: Hammers: No 775; 785; 790; 811; 950; 955/35; Dollies: No 830; 835; 840; 850; 861; Pliers: No 9; 930; Special Spoons: No 890; 895; 900; Body File Holder: No 905; Padlock: No 12932 Code kg S 988121 18.3 1 811.50 O 1 2 Code mm mm mm g S 70130005 18/41 300 158 480 2 38.70 795 with round face and acorn shaped pein. Pecking hammer O 1 2 Code mm mm mm g S 70130006 20/41 300 160 460 2 38.60 268 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com $ 800 short, round flat face and pointed pein. Pecking hammer 832 Planishing anvil O 1 2 Code mm mm mm g S 70130007 35 300 135 360 2 38.60 805 round flat face, oblong, thin pein, approx. 1 mm thick. Pecking hammer Code faces/mm g S 702015 85 x 55 / 45 x 40 1160 1 57.50 835 Wedge dolly O 1 2 Code mm mm mm g S 70130008 40 300 160 450 2 41.40 806 extra large thin face and pein. Pecking hammer b h Code mm mm mm g S 702002 130 55 32 958 1 53.50 838 Anvil dolly O 1 2 Code mm mm mm g S 70130011 40 300 135 382 2 54.50 811 Planishing and grooving hammer b h Code mm mm mm g S 702003 75 60 50 68 1 38.60 840 Special anvil dolly O y 1 2 Code mm mm mm mm g S 70130012 30 36 x 320 160 531 2 32.60 b h Code mm mm mm g S 702004 70 57 70 1250 1 52.00 841 Thin dolly 812 Planishing and grooving hammer O y 1 2 Code mm mm mm mm g S 70130013 30 25 x 5 300 115 350 2 33.90 830 Dolly b h Code mm mm mm g S 702005 7 66 28 984 1 39.60 842 Diabolo dolly b h Code mm mm mm g S 702001 80/0 70/45 65 1450 1 57.00 O h Code mm mm g S 702006 57 60 658 1 38.70 269 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

$ Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 845 Toe dolly 880 Bumping spoon b h Code mm mm mm g S 702008 120 55 22 770 1 39.60 850 axe shape. Anvil block 1 2 Code mm mm g S 70220001 460 200 1900 1 65.50 1 = length overall 2 = working length 885 Bumping spoon b h Code mm mm mm g S 702009 65/50 25/8 140 860 1 35.30 855 Universal anvil dolly 70220002 500 22 1 78.50 890 Body spoon b h Code mm mm mm g S 7020 70/60 50/45 58 1200 1 59.00 861 chequered surface. Toe dolly 1 2 Code mm mm g S 70220003 270 130 520 1 31.50 895 Body spoon b h Code mm mm mm g S 702014 120 55 30 33 1 42.00 865 Heel dolly 1 2 Code mm mm g S 70220004 390 200 970 1 51.00 1 = length overall 2 = working length 900 with leather cap. Flange tool b h Code mm mm mm g S 702012 80 60 35 70 1 38.90 866 with three flat and three shaped faces. Dolly 70220005 400 10 1 30.40 925 5 pieces. Soldering wedges, wood b h Code mm mm mm g S 702016 115 48 48 1550 1 61.50 77530001 364 1 21.00 270 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com $ 105 head and point polished. Pry bar O Code mm mm g S 72090000 400 14 500 6 36.20 106 ever bar special steel, bright nickel-plated. W Code mm mm g S 72090002 400 14 500 6 29. 107 ever bar special steel, bright nickel-plated. File blades for No 922 teeth Code No per inch mm g S 79060014 917 coarse, without swarf breaker, half round, angled cut 9 350 208 5 30.60 79060004 921 coarse, without swarf breaker, half round, radial cut 9 350 216 5 40.00 12752 Tin snips lever action, spring-assisted for self-opening action. Heavy duty cutting: sheet steel up to 1.8 mm or stainless steel sheet up to 1.2 mm. W Code mm mm g S 72090003 400 17 643 6 42. 905 with coarse blade. Body file holder b h Code mm mm mm g S 72160000 365 35 1 760 2 84.00 = ength, b = Width, h = Height 923 wooden, for flat blades. Body file holder 72200002 530 300 1 22.60 Spare blades for No 905 and No 923 teeth Code No per inch mm g S 79060001 906 fine, radial cut 15 350 321 35.30 79060002 907 medium, radial cut 12 350 286 34.50 79060003 908 coarse, radial cut 9 350 279 30.40 79060012 915 medium, angled cut 12 350 282 30. 1 79060013 916 coarse, angled cut 9 350 252 28.50 922 wooden, for half round radius file blades. Body file holder 72200001 530 260 1 24.60 Code shape mm " g S 75230001 1 ) 260 1 /2 532 1 64.50 75230002 2 ) 260 1 /2 532 1 64.00 1 ) left hand cutting 2 ) right hand cutting 12753 Tin snips lever action, spring-assisted for self-opening action. Heavy duty cutting: sheet steel sheet up to 1.8 mm or stainless steel sheet up to 1.2 mm. Code shape mm " g S 75240001 1 ) 260 1 /2 473 1 63.50 75240002 2 ) 260 1 /2 473 1 63.50 1 ) left hand cutting 2 ) right hand cutting 642 Set-off pliers for offsetting sheet metal edges up to 1 mm thickness, ensuring shoulder free surface. Handles fitted with H.D. plastic sleeves. jaw width Code size mm mm g S 76490001 1 15 300 831 1 79.50 76490002 2 30 300 847 1 81.00 643 Punch pliers for use on sheet metal up to 1 mm thickness (hole spot welding MAG welding technique). Use in conjunction with setoff pliers No 642. Handles fitted with H.D. plastic sleeves. O Code size mm mm g S 76590002 2 5.5 300 806 1 121.00 271 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

$ Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 12727 Spot weld milling cutter HSSE steel, for spot-weld removal on car body or sheet metal construction. eplaceable milling cutter size mm. Cutting depth adjustment by set screw, avoids distortion damage to sheet metal. 72260001 72 19 5 24.20 12728 eplacement milling cutter 12770/2 ever bar for levering off fragile caps, decorative trim (strips and rings), switches, rubber or fabric trim without damaging them. Finely honed, rounded edges ensure the vehicle paintwork and surrounding materials are not damaged or scratched. 745902 185 58 1 22. 12770/3 Plastic lever bar for removing trim and rubbing strips of all kinds on bodywork and around windscreens, rear and side windows. The broad area of contact prevents damage such as scratching of painted surfaces, deformation of strips and damage of glass. 79260001 13 4 11.00 74590003 300 209 1 36.90 Spot weld drills for clean, burr-free removal of spot-weld. Self-cutting centre point avoids running off spot weld. Can be reground. O Code No mm g S 72270007 12729 7 18 5 17.30 72270008 12730 8 24 5 21.20 Tools for fitting/removing vehicle glass 350N 1 guide handle 1 draw handle 1 coil cutting wire (50 m) 2 double suction lifters Windscreen replacement set VEITAC Tools for vehicle doors 12769 Universal alignment tool for automobile doors Scope of application: Almost all car and van doors, boot lids and hatchback doors. The application for this tool is door locks and door guide pins. Also suitable on door lock shackles, i.e. as on Opel and Mercedes-Benz. The universal alignment tool is supplied with 3 different, interchangeable special bolts, housed within the tubular handle. The handle bend is reinforced by a twin tube. 744500 720 1815 1 180.00 12770 ever bar powder coated for improved slide effect, for removal of doors trims in cars. 745901 260 150 5 19.20 98742711 1760 1 303.20 351N as 350N, but without double suction lifters. Windscreen removal set VEITAC 96742711 458 1 87.20 352 Suction cap dia. 120 mm, mechanical action with safety lock. Special ABS-plastic, oil and acid resistant. With belt slots in the handles. Carrying capacity 60 kg. Two double suction lifters 74280001 1405 1 216.00 272 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com $ 352/1 Suction cap dia. 120 mm, mechanical action with safety lock. Special ABS-plastic, oil and acid resistant. With belt slots in the handles. Carrying capacity 60 kg. Double suction lifter 74280005 695 1 8.00 351/1 Draw handle for drawing cutting wire through adhesive seal. 74270001 90 1 25.90 351/2 for fixing and clamping cutting wire inside vehicle. Guide handle 355 Wire insert probe for threading cutting wire through hardened adhesive, 2.5 mm steel tubing with brass handle. 74270004 91 1 21.20 1474/2 Wire insert awl for feeding or pulling cutting wire through hardened adhesive. 780302 70 2 19.00 12718 for removing residues of sealant and adhesive. Flat scraper 720301 265 128 5 16.90 74270002 196 1 30.30 351/3 for fixing and clamping cutting wire inside vehicle. Extra long extension makes it especially suited to recessed glass. Guide handle 74270006 190 1 37.20 SD351N Spare cutting wire special alloy steel 0.6 x 0.6 mm. Easy wire removal without the rest unrolling. Code m g S 79270011 50 170 1 31.00 354 for clamping and fixing freshly fitted vehicle glass, synthetic webbing. Tension strap with ratchet Width 74270003 25 375 1 17.30 356 Scraper for removing residues of adhesive and stickers from vehicle glass. Blade 40 mm wide, 0.3 mm thick, interchangeable with cover. ength Width Code mm mm g S 74270005 165 40 90 1 9.35 356 pieces dispenser. Spare blades 79270015 45 1 6. 12749 Scraper with reversible tungsten steel blade for removing residues of adhesive and stickers from vehicle glass. Can also be used for scraping metal and seals. Includes angled inner hex. screwdriver. 7231 495 582 1 70.00 12749 for scraper No 12749. Spare blade 793001 19 1 46.80 273 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com Workshop sets 806/ Tool set 99 Tools, in plastic inlays (modular system see page 32 42), 9x1/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N. Code kg 98830001 13.35 16. 96838126 96838127 No 760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; ; 12 mm No 52 1/2" a sizes ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm No 506 1/2" D 300 mm No 509/2 1/2" Da52 mm No 509/5 1/2" Da130 mm No 509/ 1/2" Da255 mm No 5 1/2" Da71 mm No 512 1/2" D No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 0 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm) size 5 (1.6 x 8.0 x 175 mm) No 4630 sizes 1; 2; 3 No 65 01 5 180 No 65 29 5 200 No 65 43 4 002 96838128 968381 No 65 45 4 002 No 65 51 6 240 No 65 64 2 250 96838112 96838113 No 66 02 5 160 No 2 No 8 No 9 175 mm 150 x 6; 175 x 6 mm size 6; 0 x 3.4 mm No 956 O 35 mm No 960 500 g 96838237 96838121 96838123 96838125 No sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm No 13 sizes 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm No 40 1/4" a sizes 5.5; 6; 7; 8; 9; ; 11; 12; 13; 14 mm No 400 1/4" D 150 mm No 404 No 405/2 No 405/6 No 407 No 412 No 415 1/4" D 116 mm 1/4" Da54 mm 1/4" Da150 mm 1/4" Da38 mm 1/4" ba 1/4" D 274 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 806/9 TCS TCS tool set xö98 Tools, in TCS inlays (Tool Control System see page 43 58), 7x1/3, 1x2/3 and 1x3/3 inlays for 4 drawers, suitable for Workbench No 92KM G, Tool trolleys No 97N, 97N/KM, 97H/8, 97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box No 922N. Code kg 98830004 12.53 93.65 96838175 96838176 96838177 96838278 No 412 No 415 1/4" b a 1/4" D No 760CV sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; ; 12 mm No 52 1/2" a sizes ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm No 506 1/2" D 300 mm No 509/2 1/2" Da52 mm No 509/5 1/2" Da130 mm No 509/ 1/2" Da255 mm No 5 1/2" Da71 mm No 512 1/2" D No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 0 mm); size 3 (1.0 x 5.5 x 125 mm); size 4 (1.2 x 6.5 x 150 mm) No 4630 sizes 1; 2; 3 No 65 01 5 180 No 65 29 5 200 No 65 43 4 002 No 65 45 4 002 No 65 51 6 240 No 65 64 2 250 96838179 96838180 No 66 02 5 160 No 2 No 8 No 9 175 mm 150 x 6; 175 x 6 mm size 6; 0 x 3.4 mm No 956 O 35 mm No 960 500 g 96838181 System Control Tool Tool System Control Tool Control System The safety inlay system 96838183 96838182 No sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 24 x 27; 30 x 32 mm No 13 sizes 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24 mm No 40 1/4" a sizes 5.5; 6; 7; 8; 9; ; 11; 12; 13; 14 mm Designed to fit our Tool trolleys and Tool boxes With yellow signal cut-outs to show whether all tools are in their places No 400 1/4" D 150 mm No 404 No 405/2 No 405/6 No 407 1/4" D 116 mm 1/4" Da54 mm 1/4" Da150 mm 1/4" Da38 mm 275 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 11 TCS Workshop set for Audi No 40 1/4" a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; ; 11; 12; 13; 14 mm No 400 1/4" D 150 mm xö2 tools, in TCS inlays (Tool Control System see page 43 58), 7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers. Code kg 97830800 22.9 2391.60 9683 0875 9683 8751 No 404 No 405/2 No 405/4 No 405/6 No 407 No 412 No 415 No 409 1/4" D 116 mm 1/4" Da54 mm 1/4" Da0 mm 1/4" D a150 mm 1/4" D a38 mm 1/4" b a 1/4" D 3/8" D 1 /4" a No 50 1/2" a sizes ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm No 52 1/2" a sizes ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm No 54 1/2" a sizes 5; 6; 7; 8; ; 12; 14; 17; 19 mm 9683 0880 9683 0166 No 54KK 1/2" a sizes 5; 6; 7; 8; mm No 54X 1/2" a sizes M8; M; M12; M14; M16 No 59X 3/4" a size M18 No 54X/M8 1/2" a 80 mm No 3054X/M 1/2" a 140 mm No 3054X/M12 1/2" a 140 mm No 3054X/M14 1/2" a 140 mm No 54TX No 509/5 No 509/ No 509W/3 1/2" a sizes T50; T55; T60 1/2" Da130 mm 1/2" Da255 mm 1/2" Da75 mm 9683 0877 9683 0879 No 509W/5 No 509W/ 1/2" Da130 mm 1/2" Da255 mm No 5 No 512 1/2" Da71 mm 1/2" D No 513 3/8" D 1 /2" a 9683 0878 9683 0876 9683 8184 9683 0622 83820360 9683 0609 No 13 sizes 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm No 20 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm No 24 size x 11 mm No 25 sizes 7 x 8; 9 x ; x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19 mm No 514 3/4" D 1 /2" a No 1162 0.6 x 3.5 mm No 1166 1.0 x 5.5 mm No 1167 1.2 x 8.0 mm No 1220 1223 sizes 0; 1; 2; 3 No 1350 size M4 No 1356 size M5 No 1357 size M6 No 1358 size M8 No 1359 size M No 14 size T6 No 1411 size T7 No 1412 size T8 No 1413 size T9 No 1414 size T No 1415 size T15 No 1416 size T20 No 1417 size T25 No 1418 size T27 No 1419 size T30 No 1420 size T40 No 4724 size 2 (1.0 x 5.5 x 25 mm) No 4734 size 2 No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 0 mm; 1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm 276 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com No 4830 sizes 1; 2; 3 No 4856 sizes T6; T7; T8; T9; T; T15; T20; T25; T27; T30 No 767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; mm No 771/8 sizes T9; T; T15; T20; T25; T27; T30; T40 No 65 01 5 180 No 65 29 5 200 No 65 64 2 250 No 65 72 6 240 No 66 02 5 160 No 2 200 mm No 3 150 mm No 5 120 x mm No 8 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm 96830603 96838177 96830607 96830706 96830608 96830604 No 957 O 40 mm 2500 TCS No 960 No 12373 No 12600 No 12718 No 12931 No 39 Pkw 500 g 500 g 3 m 400 mm Workshop set for BMW vehicles xö285 tools, in TCS inlays (Tool Control System see page 43 58), 7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers. Code kg 97830600 23.7 3350.90 96830622 96830609 No sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24 mm No 13 sizes 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm No 20 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22 mm No 24 size x 11 mm No 40 1/4" a sizes 3; 5; 5.5; 6; 7; 8; 9; ; 11; 12; 13; 14 mm No 40 1/4" a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; ; 11; 12; 13 mm No 41K 1/4" a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm No 44K 1/4" a, E 3; 4; 5; 6; 8 mm No 44P 1/4" a, k sizes 1; 2; 3; 4 96838192 96830679 No 400 No 404 No 405/2 No 405/4 No 405/6 1/4" D 150 mm 1/4" D 116 mm 1/4" Da54 mm 1/4" Da0 mm 1/4" Da150 mm No 407 1/4" D a38 mm No 412 1/4" ba No 415 1/4" D No 409 3/8" D 1 /4" a No 456 3/8" a sizes 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm 96830605 96830602 No 46 3/8" a sizes ; 11; 12; 13 mm No 47 3/8" a sizes ; 11; 12; 13; 14; 15; 16 mm Continuation next page 277 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com No 49 No 49-9 No 49X No 427/3 No 427/5 No 427/ No 435 No 452 No 428 No 431 No 432 3/8" a sizes 5; 6; 7 mm 3/8" a size 9 mm 3/8" a sizes M6; M8; M 3/8" D a76 mm 3/8" D a125 mm 3/8" D a240 mm 3/8" D 3/8" D 3/8" D a46 mm 1/4" D 3 /8" a 1/2" D 3 /8" a No 52 1/2" a sizes ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm No 54 1/2" a sizes 8; ; 12; 14; 17 mm No 509Q/2 1/2" Da52 mm No 509/5 1/2" Da130 mm No 509Q/ 1/2" Da255 mm (2x) No 506 1/2" D 300 mm No 4856 sizes T6; T7; T8; T9; T; T15; T20; T25; T27; T30 No 766 sizes T6; T7 No 766/9 sizes T8; T9; T; T15; T20; T25; T27; T30; T40 TOX controller No 4628 size 1 (0.4 x 2.5 x 60 mm) No 4724 size 2 (1.0 x 5.5 x 25 mm) No 4734 size 2 No 4744 size 1 No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 0 mm; 1.2 x 6.5 x 150 mm; 1.6 x.0 x 200 mm; 2.0 x 12.0 x 250 mm No 4830 sizes 1; 2; 3 No 4840 size 1 No 767/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; mm No 5 No 512 No 513 No 514 1/2" Da71 mm 1/2" D 3/8" D 1 /2" a 3/4" D 1 /2" a No 2309K 1/2" a sizes 17; 19 mm No 12506N sizes 6; 7 mm No 21TX sizes E6 x E8; E x E12; E14 x E18; E20 x E24 No 65 01 5 180 No 65 29 5 200 No 65 43 4 002 No 65 44 4 021 No 65 45 4 002 No 65 46 4 021 No 40TX 1/4" a sizes E4; E5; E6; E7; E8 No 44KTXB 1/4" a sizes T; T15; T20; T25; T27; T30; T40 No 45TX 3/8" a sizes E; E12; E14 No 47TX 3/8" a sizes E8; E No 49TX 3/8" a size T40 No 50TX 1/2" a sizes E11; E16; E18; E20; E24 No 54TX 1/2" a sizes T45; T50; T55; T60 No 54TXB 1/2" a sizes T30; T40; T45; T50 No 409M 3/8" D 1 /4" a No 415B 1/4" b No 14 size T6 No 1411 size T7 No 1412 size T8 No 1413 size T9 No 1440 size T No 1441 size T15 No 1442 size T20 No 1443 size T25 No 1444 size T27 No 1445 size T30 No 1446 size T40 No 1427 size T25 (65 mm) No 1435 size T55 No PZ1221 size 1 No PZ1222 size 2 No PZ1223 size 3 No 736/40 No 3115/1 5/16" b size D8 1/4" D E No 65 64 2 250 No 65 72 6 240 No 66 02 5 160 No 2 200 mm No 3 150 mm No 5 120 x mm No 8 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm No 957 No 960 No 12373 No 12600 No 12718 No 12922E No 12931 No 39 cars No 7756 O 40 mm 500 g 500 g 3 m 400 mm 278 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 2501 TCS Workshop set for BMW motorbikes No 404 No 405/2 No 405/4 1/4" D 116 mm 1/4" Da54 mm 1/4" Da0 mm xö209 tools, in TCS inlays (Tool Control System see page 43 58), 2x1/3, 2x2/3 and 5x3/3 inlays for 7 drawers. Code kg 97830601 22.6 2411. No 407 No 412 No 415 1/4" D a38 mm 1/4" b a 1/4" D No 456 3/8" a sizes 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm No 49 3/8" a sizes 5; 6; 7; 8; mm No 425 No 427/3 No 427/ 3/8" D 165 mm 3/8" D a76 mm 3/8" D a240 mm 96830615 96830614 96831617 96830620 No 428 No 431 No 435 3/8" D a46 mm 1/4" D 3 /8" a 3/8" D No 52 1/2" a sizes ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm No 54 1/2" a size 12 mm No 506 1/2" D 300 mm No 509/5 1/2" Da130 mm No 509/ 1/2" Da255 mm No 5 1/2" Da71 mm No 512 1/2" D No 513 3/8" D 1 /2" a No 21TX size E6 x E8 No 44KTXB 1/4" a sizes T8; T; T15; T20; T25; T27; T30; T40 96830618 96830619 No 45TX No 49TX No 54TX No 54TX No 2054TX 3/8" a sizes E8; E; E12; E14 3/8" a sizes T25; T45 1/2" a sizes T40; T50; T55; T60 1/2" a size T50 1/2" a sizes T40; T45 96830616 96830622 96830621 No sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 21 x 22 mm No 13 sizes 5.5; 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 27; 29; 30; 32; 34 mm No 24 sizes 8 x ; 9 x 11 mm No 40 1/4" a sizes 4; 5; 5.5; 6; 7; 8; 9; ; 11; 12; 13; 14 mm No 44K 1/4" a, E 3; 4; 5; 6; 8 mm No 400 1/4" D 150 mm No 766/6 sizes T15; T20; T25; T27; T30; T40 No 769 sizes T8; T; T15; T20; T25; T30; T40; T45; T50 No 4621 size 0 (0.4 x 2.5 x 80 mm) size 1 (0.5 x 3.5 x 90 mm) size 2 (0.6 x 4.0 x 0 mm) size 4 (1.0 x 6.5 x 140 mm) size 5 (1.2 x 8.0 x 160 mm) No 4631 sizes 1; 2 No 4632 sizes 1; 2 No 4724 size 2 (1.0 x 5.5 x 25 mm) No 4734 size 2 No 506 0.8 x 4 x 300 mm No 518 1.0 x 5.5 x 4 mm No 765/9 No 768 No 12507-2K No 65 01 5 180 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; mm sizes 2.5; 3; 4; 5; 6; 8; mm sizes 8; ; 13 mm Continuation next page 279 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com No 65 29 5 200 No 65 35 5 200 No 65 45 4 001 No 65 45 4 002 No 65 45 4 004 No 65 46 4 021 No 65 72 6 240 No 66 02 5 160 96838179 96830323 No 66 17 0 215 No 66 60 1 220 No 2 150 mm No 3 150 mm No 5 120 x mm No 8 150 x 2.5; 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm 96831168 96830226 No 356 No 670 No 672 285 mm 20 x 315 mm No 956 O 50 mm 96830164 96830165 No 960 300; 500 g No 12374 No 12600 500 g No 12900N No 12922E No 12965 3026N/1 TCS Tool set for Mercedes-Benz cars 96830166 96830219 xö279 tools, in TCS inlay (Tool Control System see page 43 58), 5x1/3, 5x2/3 and 3x3/3 inlays for 8 drawers. Code kg 97830008 26.6 3059.45 96830227 96830167 96830217 96830218 96830163 No sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32; 34 x 36 mm No 13 sizes 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm No 20 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm No 21 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24; 27 x 32; 30 x 34 mm No 24 sizes x 11; 12 x 14 mm No 40 1/4" a sizes 5; 5.5; 6; 7; 8; 9; ; 11; 12; 13; 14 mm 280 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com No 41K 1/4" a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm No 44K 1/4" a, E 3; 4; 5; 6; 8 mm No 44P 1/4" a, k sizes 1; 2; 3; 4 No 400 No 404 No 405/2 No 405/6 No 407 No 409 No 412 No 415 1/4" D 150 mm 1/4" D 116 mm 1/4" D a54 mm 1/4" D a150 mm 1/4" D a38 mm 3/8" D 1 /4" a 1/4" b a 1/4" D No 456 3/8" a sizes 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm No 427/3 3/8" Da76 mm No 427/5 3/8" Da125 mm No 427/ 3/8" Da240 mm No 428 No 431 No 432 No 435 3/8" D a46 mm 1/4" D 3 /8" a 1/2" D 3 /8" a 3/8" D No 50 1/2" a sizes 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 30 mm No 52 1/2" a sizes 12; 17; 18; 19; 20; 21; 22; 24; 25; 27; 30; 32 mm No 509/2 1/2" Da52 mm No 509/5 1/2" Da130 mm No 509/ 1/2" Da255 mm No 5 No 512 No 513 No 514 1/2" D a71 mm 1/2" D 3/8" D 1 /2" a 3/4" D 1 /2" a No 54 1/2" a sizes 5; 6; 7; 8; ; 12; 14; 17; 19 mm No 55 3/4" a size 36 mm No 14 No 1411 No 1412 No 1413 No 1440 No 1441 No 1442 No 1443 No 1444 No 1445 No 1446 No 1427 size T6 size T7 size T8 size T9 size T size T15 size T20 size T25 size T27 size T30 size T40 size T25 (65 mm) No PZ1221 size 1 (2x) No PZ1222 size 2 (2x) No PZ1223 size 3 No 3115/1 1/4" DE No 4650 sizes T6; T7; T8; T9; T; T15; T20; T25; T27; T30 No 766 sizes T6; T7 No 771/8 sizes T9; T; T15; T20; T25; T27; T30; T40 TOX controller No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 0 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x.0 x 200 mm); size 7 (2.0 x 12.0 x 250 mm) No 4628 size 1 (0.4 x 2.5 x 60 mm) No 4630 size 1; 2; 3 No 4632 size 4 No 4640 sizes 0; 1; 2 No 4660 VDE size 1 (0.4 x 2.5 x 75 mm) No 4724 size 2 (1.0 x 5.5 x 25 mm) No 4734 size 2 No 4744 size 1 No 767/9 No 65 01 5 180 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; mm No 2309K No 12506N 1/2" a sizes 17; 19 mm sizes 6; 7 mm No 21TX sizes E6 x E8; E x E12; E14 x E18; E20 x E24 No 65 29 5 200 No 65 51 6 240 No 65 64 2 175 No 40TX 1/4" a sizes E4; E5; E6; E7; E8 No 44KTXB 1/4" a sizes T; T15; T20; T25; T27; T30; T40 No 45TX 3/8" a sizes E; E12; E14 No 47TX 3/8" a sizes E8; E No 49TX 3/8" a size T40 No 49X 3/8" a sizes M6; M8; M No 50TX 1/2" a sizes E11; E16; E18; E20; E24 No 54TX 1/2" a sizes T45; T50; T55; T60 No 54TXB 1/2" a sizes T30; T40; T45; T50 No 409M No 415SGB 3/8" D 1 /4" a 1/4" b No 66 02 5 160 No 2 200 mm No 3 150 mm No 5 120 x mm No 8 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8; 200 x 8 mm No 672 20 x 315; 25 x 365 mm No 957 No 960 No 12377 No 12600 No 12718 O 40 mm 500; 800 g 3000 g 281 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 3022N/1 TCS Tool set for Mercedes-Benz HGVs xö308 tools, in TCS inlay (Tool Control System see page 43 58), 6x1/3, 2x2/3 and 7x3/3 inlays for 11 drawers. Code kg 97830009 47.3 3965. 96830165 96830166 96830167 96830217 96830220 96830218 96830172 96830225 96838179 96830222 96830324 No sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32; 34 x 36 mm No 13 sizes 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm No 14 size 24 mm No 20 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm No 21 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24; 27 x 32; 30 x 34 mm No 24 sizes x 11; 12 x 14 mm No 40 1/4" a sizes 5; 5.5; 6; 7; 8; 9; ; 11; 12; 13; 14 mm No 41K 1/4" a, r 0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm No 44K 1/4" a, E 3; 4; 5; 6; 8 mm No 44P 1/4" a, k sizes 1; 2; 3; 4 No 400 1/4" D 150 mm No 404 No 405/2 No 405/6 1/4" D 116 mm 1/4" Da54 mm 1/4" Da150 mm 96830221 96831179 No 407 No 409 No 412 1/4" Da38 mm 3/8" D 1 /4" a 1/4" ba 96830177 96830178 No 415 1/4" D No 456 3/8" a sizes 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm No 427/3 3/8" Da76 mm No 427/5 3/8" Da125 mm No 427/ 3/8" Da240 mm No 428 3/8" Da46 mm No 431 1/4" D 3 /8" a No 432 1/2" D 3 /8" a No 435 3/8" D No 50 1/2" a sizes 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 30 mm 282 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com No 52 1/2" a sizes 12; 17; 18; 19; 20; 21; 22; 24; 25; 27; 30; 32 mm No 504/15 1/2" D 397 mm No 506 1/2" D 300 mm No 509/2 1/2" Da52 mm No 509/5 1/2" Da130 mm No 509/ 1/2" D a255 mm (2 x) No 5 No 512 1/2" D a71 mm 1/2" D No 54 1/2" a sizes 5; 6; 7; 8; ; 12; 14; 17; 19 mm No 51IMP No 2309 No 2309K 1/2" a sizes 24; 27 mm 1/2" a size 22 mm 1/2" a sizes 17; 19 mm No 21TX sizes E6 x E8; E x E12; E14 x E18; E20 x E24 No 40TX 1/4" a sizes E4; E5; E6; E7; E8 No 44KTXB 1/4" a sizes T; T15; T20; T25; T27; T30; T40 No 45TX 3/8" a sizes E; E12; E14 No 49TX 3/8" a size T40 No 49X 3/8" a sizes M6; M8; M No 50TX 1/2" a sizes E11; E16; E18; E20; E24 No 54TX 1/2" a sizes T45; T50; T55; T60 No 54TXB 1/2" a sizes T30; T40; T45; T50 No 409M 3/8" D 1 /4" a No 415SGB 1/4" b No 14 size T6 No 1411 size T7 No 1412 size T8 No 1413 size T9 No 1440 size T No 1441 size T15 No 1442 size T20 No 1443 size T25 No 1444 size T27 No 1445 size T30 No 1446 size T40 No 1427 size T25 (65 mm) No PZ1221 size 1 (2x) No PZ1222 size 2 (2x) No PZ1223 size 3 No 3115/1 1/4" DE No 4650 sizes T6; T7; T8; T9; T; T15; T20; T25; T27; T30 No 766 sizes T6; T7 No 771/8 sizes T9; T; T15; T20; T25; T27; T30; T40 TOX controller No 55 3/4" a sizes 22; 24; 27; 30; 32; 34; 36; 38; 41; 46; 50 mm No 552 3/4" D No 556 3/4" D No 559/8 3/4" Da200 mm No 559/16 3/4" Da400 mm No 558 5 mm 283 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329 2004 64 tools No 568 1/2" D 3 /4" a No 4620 size 1 (0.6 x 3.5 x 75 mm); size 2 (0.8 x 4.0 x 0 mm); size 4 (1.2 x 6.5 x 150 mm); size 5 (1.6 x 8.0 x 175 mm); size 6 (1.6 x.0 x 200 mm); size 7 (2.0 x 12.0 x 200 mm) No 4628 size 1 (0.4 x 2.5 x 60 mm) No 4630 sizes 1; 2; 3 No 4632 size 4 No 4640 sizes 0; 1; 2 No 4660 VDE size 1 (0.4 x 2.5 x 75 mm) No 4724 size 2 (1.0 x 5.5 x 25 mm) No 4734 size 2 No 4744 size 1 No 760CV No 767/9 No 65 01 5 180 No 65 29 5 200 No 65 51 6 240 sizes 12; 14; 17; 19; 22 mm sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; mm No 66 02 5 160 No 2 200; 300 mm No 3 175 mm No 5 120 x 12 mm No 8 150 x 3; 150 x 4; 150 x 5; 150 x 6; 150 x 8 mm No 957 No 960 No 106 No 107 No 12025 No 12036 No 12374 No 12600 No 12718 No 12931 O 50 mm 500; 800; 00 g 400 mm 400 mm 2 mm 260 mm 3000 g 3 m Tool set for Peugeot Code kg 97840504 1 of each 8.5 798.15 No sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 18; 17 x 19; 21 x 23; 22 x 24; 27 x 32 mm No 23 sizes 6 x 7; x 11; 12 x 13; 14 x 15; 17 x 19; 20 x 22; 21 x 23; 24 x 27; 30 x 32 mm No 27 size 14 x 17 mm No 456 3/8" a sizes 8; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm Continuation next page

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com No 46 3/8" a size 20.8 mm- 13 /16" No 427/5 3/8" Da125 mm No 427/6 3/8" Da160 mm No 427/18 3/8" Da455 mm No 428 3/8" Da46 mm No 435 3/8" D No 4620 size 2 (0.8 x 4.0 x 0 mm) No 4622 size 3 (1.2 x 8.0 x 150 mm) No 4628 size 3 (0.6 x 3.5 x 0 mm) No 4630 size 2 No 4632 size 3 No 4640 sizes 2; 3 No 760CV sizes 2; 4; 6; 8; ; 12 mm No 65 30 6 200 No 65 43 4 002 No 65 45 4 002 No 65 47 4 170 No 65 51 6 240 No 66 02 6 180 No 8 115 x 2; 150 x 3 mm No 613/1 330 mm No 960 500 g No 195/13 0.05 1 mm No 7756 10 TCS Tool set for Porsche 96831196 96830198 96830197 No 12 No 13 No 14 sizes 5.5; 12; 14 mm (2x) sizes 7; 11 mm (2x); sizes 6; 8; 9; ; 12; 13; 14; 15; 16; 17; 18; 19; 20; 22; 24; 30; 32; 36 mm (1x) size 17 mm No 20 sizes x 11; 12 x 13; 14 x 15; 17 x 19; 19 x 22 mm No 23 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 27; 30 x 32 mm No 24 sizes 8 x ; 11 x 13; 12 x 14; 17 x 19; 22 x 24 mm No 29 sizes 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm No 40 1/4" a sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; ; 11; 12; 13 mm No 44 1/4" a sizes 3; 4; 5; 6 mm No 400 No 404 No 405/6 No 407 1/4" D 150 mm 1/4" D 116 mm 1/4" Da150 mm 1/4" D a38 mm xö228 tools, in TCS inlays (Tool Control System see page 43 58), 1x1/3, 1x2/3 and 5x3/3 inlays for 6 drawers. Code kg 97830411 24.7 2688.35 No 409M No 415 3/8" D 1 /4" a 1/4" D No 45 3/8" a sizes 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm No 46 3/8" a size 20.8 mm- 13 /16" No 49 3/8" a sizes 4; 5; 6; 7; 8; mm No 425 3/8" D 165 mm No 427/3 3/8" Da76 mm No 427/ 3/8" Da240 mm No 428 3/8" D a46 mm 96830192 96830193 No 432M 1/2" D 3 /8" a 96830194 96830195 No 435 3/8" D No 50 1/2" a sizes 19; 21; 22; 24; 27; 30; 32 mm No 52 1/2" a sizes 16; 17; 18; 19; 22; 24; 27; 30; 32 mm No 54 1/2" a sizes 6; 7; 8; mm No 54X 1/2" a sizes M6; 8; 12; 14 No 506 1/2" D 300 mm 284 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com No 509/5 No 509/ No 5 No 512 No 514M 1/2" D a130 mm 1/2" D a255 mm 1/2" D a71 mm 1/2" D 3/4" D 1 /2" a No 21TX sizes E6 x E8; E x E12; E14 x E18; E20 x E24 No 40TX 1/4" a sizes E4; E5; E6; E7; E8 No 45TX 3/8" a sizes E; E12; E14 No 50TX 1/2" a sizes E11; E16; E18; E20; E24 No 54TX 1/2" a sizes T45; T50; T55; T60 No 14 size T6 No 1411 size T7 No 1412 size T8 No 1413 size T9 No 1440 size T No 1441 size T15 No 1442 size T20 No 1443 size T25 No 1444 size T27 No 1445 size T30 No 1446 size T40 No 1427 size T25 (65 mm) No 415SGB 1/4" b No 4650 sizes T6; T7; T8; T9; T; T15; T20; T25; T27; T30 No 766/9 sizes T8; T9; T; T15; T20; T25; T27; T30; T40 No 4622 size 1 (1.0 x 5.5 x 0 mm); size 2 (1.2 x 6.5 x 125 mm); size 4 (1.6 x.0 x 175 mm); size 5 (2.0 x 12.0 x 200 mm) No 4630 size 1 No 4632 size 3 No 4724 size 2 (1.0 x 5.5 x 25 mm) No 4734 size 2 2003 73 tools No 195/20 No 12005 No 12036 No 12321 No 12905 No 12931 20 blades 0.05 1 mm 260 mm 3 m Tool set for enault Code kg 97840503 1 of each 7.7 728.85 No 13 sizes 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 27; 32 mm No 21 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19 mm No 456 3/8" a sizes 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm No 425 3/8" D 165 mm No 427/6 3/8" Da160 mm No 427/ 3/8" Da240 mm No 428 3/8" Da46 mm No 432 1/2" D 3 /8" a No 435 3/8" D No 51 1/2" a size 17 mm No 4620 size 2 (0.8 x 4.0 x 0 mm); size 3 (1.0 x 5.5 x 125 mm) No 4628 size 3 (0.6 x 3.5 x 0 mm) No 4630 sizes 1; 2 No 4724 size 1 (0.6 x 3.5 x 25 mm) No 760CV/9 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; mm No 546 size 1 (0.6 x 3.5 mm) No 65 01 6 180 No 760CV sizes 2; 2.5; 3; 4; 5; 6; 8 mm No 65 43 4 002 No 65 51 6 240 No 65 45 4 002 No 65 46 4 021 No 66 02 6 180 No 2 No 5 150 mm 120 x mm No 65 51 6 240 No 66 02 6 160 No 0 No 3 No 4 No 5 No 8 No 670 150 mm 150 mm 120 x 4; 120 x 6 mm 120 x 12 mm 150 x 4 mm 265 mm No 956 No 960 No 195/13 No 12374 No 12718 No 7756 O 27 mm 500 g 0.05 1 mm No 940 No 955 O 55 mm O 35 mm No 960 300; 500 g 285 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 00 TCS Tool set for Volkswagen xö9 tools, in TCS inlays (Tool Control System see page 43 58), 2x1/3, 2x2/3 and 2x3/3 inlays for 4 drawers. Code kg 97830200 1 of each 15.1 1326.05 No 5 No 512 No 4724 1/2" D a71 mm 1/2" D No 4734 size 2 size 2 (1 x 5.5 x 25 mm) No 4820 0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 0 mm; 1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm; 1.6 x 8.0 x 175 mm No 4830 sizes 1; 2; 3 No 767/9 No 65 29 6 160 No 65 70 6 250 sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; mm 96830353 96830258 No 66 00 6 180 No 2 125 mm No 4 120 x 2 mm No 5 0 x mm No 8 115 x 2; 150 x 2.5; 150 x 6; 200 x 8 mm No 23 No 957 O 35 mm 96830351 96830256 No 960 500 g No 12717 No 12718 96830255 96830257 No sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 21; 19 x 22; 24 x 27; 30 x 32 mm No 13 sizes 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm No 20 sizes 6 x 7; 8 x 9; x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 23; 24 x 26; 25 x 28; 27 x 32 mm No 46 3/8" a size 20.8 mm- 13 /16" No 422 3/8" D No 50 1/2" a sizes 8; 9; 19; 30 mm No 51 1/2" a size 27 mm No 52 1/2" a sizes ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm No 54 1/2" a sizes 12; 17 mm No 54/8K 1/2" a 120 mm No 54/ 1/2" a 140 mm No 2054X/M 1/2" a 1 mm No 3054X/M12 1/2" a 140 mm No 509/5 1/2" Da130 mm No 509/ 1/2" Da255 mm No 509W/2 No 509W/5 1/2" D a52 mm 1/2" D a130 mm Special tools for cars! Special tools for carburettors 503 for adjusting slotted screws, matt chrome, black tip. r Screwdriver Blade Code mm mm g S 7321 365 0.8 x 5.0 x 260 0 7.45 506 r Screwdriver for setting correct CO-valve on mixture screen, idling mixture on Pierburg carburettors: BMW, Ford, Opel, Peugeot, enault, Mercedes-Benz cars. Choke adjustment Audi 80, VW Passat 1.3-1.5; 1.6 l, matt chrome, black tip. Blade Code mm mm g S 730001 350 0.8 x 4.0 x 300 53.40 286 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com! 507N KK i Screwdriver for hexagon socket head screws, size 3 mm, for mixture regulation on distributor of K-Jetronic: VW-Audi, Mercedes-Benz, Porsche 924, Ford and BMW, matt chrome, black tip. 7303 385 56 5.80 518 for adjustment (slotted screws), matt chrome, black tip. r Screwdriver Blade Code mm mm g S 7322 525 1.0 x 5.5 x 4 159 9.70 185 Jet reamers 16 pieces in case, with holder. measuring range 743001 0.33 2.0 27 33.80 12504 for all screwdriver bits, flexible shaft, for adjustment. Bit holder with inside hexagon inside Blade Code mm a " mm g S 1816 260 1/4 150 168 15.70 54TX-T20 Screwdriver Bit for inside TOX screws, size T20, 1/2" a-drive, use on mounting screws for choke-switch on choke-flap -Jetronic. 030020 BMW 71 5.50 540-22 COW-FOOT spanner size 22 mm, 3 /8" a-drive, on through-flow jet of 2B4-carburettor, for use with adaptor No 513. 62 Socket bi-hexagon, AS drive, size 27 mm, 1/2" a-drive, for diesel injectors. 03830027 BMW: M 21: E30 = 324td, E28 = 524td, E34 = 524td, M 51: E36 = 325td, E34 = 525tds 255 5 41.90 23 Special ring spanner single ended, angled, size 13 mm, use on mounting screws of injection pump. 411013 Citroën: all diesel VW/Audi: Audi 80, C, G, CD, Golf, Jetta,Caddy, Passat, Santana 67 1 14.20 51-27 Socket extra deep, bi-hexagon, size 27 mm, 1/2" a-drive, for injection nozzles on diesel car engines. 03020027 Mercedes-Benz 294 5 20.70 51-30 size 30 mm, for injectors. Socket 03020030 Mercedes-Benz 341 5 21.00 3000 Socket multi-spline, 1.5 x 58 mm, 1 /2" a-drive, for use on pre-chamber with indirect injection. 03390001 Mercedes-Benz diesel 185 39.00 3505 Special extension 02200022 BMW: series 3, 518, 520 64 1 37.90 513 1/2" socket x 3 /8" plug. Adaptor 13030002 BMW: series 3, 518, 520 55 5 8.95 132001 186 1 21. 54-13 INHEX socket for hexagon socket head screws, size 13 mm, length, 70 mm, 1 /2" a-drive, for use on brass air-cooled injector nozzles. 03150713 VW/Audi: for engines with fuel injection 130 5 22.80 287 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

? Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com? Special tools for valves and pistons 163 Valve seating-ring pliers for pulling valve stem seals and removal of valve spring base on VW-Audi engines with overhead camshaft i.e. Golf, Passat, Audi 80, Audi 0, BMW and Mercedes- Benz, bright nickel-plated. 74290001 250 340 1 37. 163/1 Valve seating-ring pliers for extracting poorly accessible valve shaft seals, e.g. in four-valve engines. Joint and jaws made of gun-finished hardened sheet steel. Handles made of nickel-plated shaped sheet steel. 74290002 270 330 1 42.90 169 Piston ring pliers for mounting and removing piston rings, bright nickel-plated. for piston rings Code size mm mm g S 74152001 1 1 ) 50 0 200 245 1 25.30 74152002 2 80 120 240 279 1 27. 74152003 3 1 160 240 394 1 29.50 74152005 5 2 ) 60 160 220 194 1 31. 1 ) Fiat-No A 60 182 (Type 126, 127, 133, 850T) 2 ) with V-shaped contact faces for safe and positive manipulation of piston rings 195 197 DIN 2275, DIN EN 140, nickel-plated case, tapered blades. Precision feeler gauges 1 3 5 166 bright nickel-plated. Valve spring lifters Code No Sizes mm g S 74240001 195/13 0.05; 0.; 0.15; 0.20; 0.25; 0.30; 0.40; 0.50; 0.60; 0.70; 0.80; 0.90; 1.00 mm 0 61 6.05 74240002 195/20 0.05; 0.; 0.15; 0.20; 0.25; 0.30; 0.35; 0.40; 0.45; 0.50; 0.55; 0.60; 0.65; 0.70; 0.75; 0.80; 0.85; 0.90; 0.95; 1.00 mm 0 95 9.25 74240005 197/26 1 1 /2; 2; 2 1 /2; 3; 4; 5; 6; 7; 8; 9; ; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25/00" 0 80 11.30 Clamp. width Jaws Code size mm (2 pieces) g S 74122001 1 75 225 166/1 1200 1 64.50 74122003 2N 120 280 166/3 + /4 3214 1 123.00 166 Spare jaws for No 166, 2 each, hardened, nickel-plated. Code size shape for No g S 791201 1 straight 166/1 120 1 13.20 791202 2 bent 166/1 120 1 13.20 79120201 3 straight 166/2 3 1 13.20 79120202 4 bent 166/2 114 1 13.20 168 made of spring steel, stepless adjustment c/w hexagon key wrench. Piston ring compressors Clamp. width Height Code size mm mm g S 74140000 0 40 75 50 5 1 16.90 74140001 1 1 ) 57 125 80 230 1 26.70 74140003 2 90 175 80 309 1 36.20 74140005 3 90 175 165 603 1 67.00 1 ) Fiat-No A 60 605 (Type 126, 127, 128, X 1/9, 130, 131, 132, 850T, 238) 128 Valve spring tool incorporating 2 clamping and 2 compression facilities which are interchangeable, suitable for most car engines, some without removing cylinder head. 74570001 780 1 82.50 12705 steel probe, plastic handle and sound tubes. Motor mechanics stethoscope 74060001 137 1 59.00 12731 with suction cap. Valve grinding tools O 74050020 20 58 5 4.40 74050025 25 54 5 4.40 74050030 30 66 5 4.55 74050037 37 65 5 5.00 288 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

? Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 40-3 Socket U hexagon, size 3 mm, 1 /4" a-drive, for releasing and tightening screws on the expansion valve. 54CV/9 for spline socket head screws (ibe CV),for brakes and cylinders head bolts. Content: M5; M6; M7; M8; M9; M; M12; M13; M14 Set: Screwdriver sockets 0003 BMW: X6 model E71, 7 Series model F01/F02 7 4.40 732/- size mm, valve adjustment, tightening torque 8 12 N m. ing insert tool 5822 BMW: all except Diesel 44 1 27.00 54- INHEX socket for hexagon socket head screws, size mm, length 140 mm, 1/2" a-drive, for cylinder head bolts. 031514 Mercedes-Benz 150 5.40 3054X-M Screwdriver BIT for tri-square socket head screws (XZN), size M, length 140 mm, 1/2" a-drive, for cylinder head bolts and drive shaft bolts. 032614 Mercedes-Benz 142 5 14.90 3054X-M12 Screwdriver BIT size M 12, for cylinder head bolts, with tri-square socket head M 12. 03261412 Mercedes-Benz 160 5 13.50 3004 Screwdriver BIT for tri-square socket head screws (XZN), size M12, length 55 mm, 1/2" a-drive, for cylinder head bolts. 96030901 Fiat, Alfa 1420 1 123.25 54CV Screwdriver sockets for spline socket head screws (ibe CV), length 60 mm, 1 /2" a-drive, for brakes and cylinder head bolts. Code size Type g S 03090007 M7 Fiat 78 5 12. 03090008 M8 Fiat 78 5 9.55 03090009 M9 Fiat (1.2 l; 8V/16V) 92 5 13.30 030900 M Fiat (1.2 l; 8V/16V) 95 5.70 1 03090012 M12 Fiat (2.0 l) 119 5 11.20 03090013 M13 Fiat, Alfa (e.g. 1.6 l; 16V) 123 5 15.70 03090014 M14 Alfa (e. g. 1.6 l; 16V) 126 5 13. 03090016 M16 Alfa (e. g.1.6 l; 16V) 163 5 14.30 40TX-E8 Special tools for chassies and steering Socket for external TOX screws, size E 8, 1/4" a-drive, for steering lock screws. 01270008 BMW 5.50 24-17x19 bi-hexagon, size 17 x 19 mm, use on wingpump manifold (hydro-steering). OPEN-ING spanner 481719 BMW 151 17.00 55-36 Socket hexagon, size 36 mm, 3 /4" a-drive, use on vibration damper. 03230012 Mercedes-Benz 75 5 20.30 050036 BMW: series 5, 6 and 7, except 518-520i 386 2 16. 289 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

% Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 540-22 COW-FOOT spanner size 22 mm, 3 /8" a-drive, use on track-rods. 02200022 BMW: series 3, 518, 520 64 1 37.90 513 1/2" socket x 3 /8" plug. Adaptor 13030002 BMW: series 3, 518, 520 55 5 8.95 1417 BIT for inside TOX screws, size T25; 1 /4" E-drive, for screws on sun roof E30. 08130025 BMW 6 2.90 3054X-M Screwdriver BIT for tri-square socket head screws (XZN), size M, on drive shaft bolts. 032614 Mercedes-Benz 142 5 14.90 160-3 Internal puller capacity 27 36 mm, for taper roller bearing outer ring on steering housing, to be used with counter stay No 161-2. 71160013 Mercedes-Benz 365 1 52.00 161-2 for taper roller bearing outer ring on steering housing. Counter stay with reduction unit 71170012 Mercedes-Benz 1500 1 64.00 46-19 Socket Fiat-No A 57 052, extra deep, bi-hexagon, size 19 mm, 3/8" a-drive, for front mounting screw of top steering link on front wheel suspension. 02020019 Fiat: 1500, 125 112 14.40 12495 Brass punch Ø 20 mm, length 200 mm, for use on bushes bearing rings, steering pivot pin. 77130000 VW/Audi 533 5 19.20 % Special tools for ignition and electrics 3466 3/8" a-drive, with magnet, outside dia 25.5 mm, for deep seated plugs. Spark plug socket A Code mm/" mm g S 02140036 16-5 /8 85 198 5 28.90 4600 3/8" a-drive, with rubber insert. Spark plug socket A Code mm/" mm g S 02120036 16-5 /8 60 88 13.90 4660* 3/8" a-drive, with magnet, outside hexagon 19 mm. Spark plug socket A Code mm/" mm g S 02130036 16-5 /8 64 113 5 26. * to be discontinued 4606 3/8" a-drive, with rubber insert. Spark plug socket A Code mm/" mm g S 02130018 18-11 /16 65 132 14. 290 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com % 42 3/8" a-drive. Tubular spark plug socket A Code mm/" mm g S 02230016 16-5 /8 270 203 5 20.80 43 3/8" a-drive, extra long, with rubber insert, for deeply recessed, difficult-to-reach spark-plugs with M12 x 1.25 mm threads. Citroën: C5 with engine 2.0 l HPI Peugeot: 406 HPI enault: Twingo, Clio, Kangoo with engine 1.2 l, 16V Tubular spark plug socket A Code No mm mm g S 02230014 43 14 90 52 1 15. 022314 43/1 14 250 144 1 19.00 46 3/8" a-drive, with rubber insert. Spark plug socket A Code mm/" mm g S 02020208 20.8-13 /16 65 151 14.50 626 forged, with 45 offset, curved jaws, for extracting and replacing sparkplug connectors. Spark plug connector pliers 76530001 195 223 1 31. 12375 wood, brass wire dia 0.15 mm. Spark plug brush Code mm ows g S 74160001 150 3 x 5 18 1.55 Tools for heater plugs 25GK atchet ring spanner angled, extra long, for hard-to-reach heater plugs (e.g. BMW, Mercedes- Benz, Peugeot, enault, Seat, VW/Audi), size 8 mm for contact rail bolts, size 12 mm for diesel heater plugs, chrome plated. 51 1/2" a-drive. Spark plug sockets A Code mm mm g S 41180812 8 x 12 255 156 1 43.20 A Code mm/" mm g S 03020216 16-5 /8 1 ) 83 137 17.20 03020208 20.8-13 /16 1 ) 83 194 18.60 03250208 M20.8-13 /16 2 )* 83 230 23.50 1 ) with rubber insert 2 ) with magnet * to be discontinued 51S 1/2" a-drive, Spark plug socket A Code mm/" mm g S 03240208 20.8-13 /16 1 ) 83 196 20.40 1 ) with rubber insert 3047 Spark plug sockets extra long, for hard-to-reach heater plugs, 3 /8" a-drive, size mm e.g. for enault, VW/Audi TDi; size 12 mm e.g. for BMW, Mercedes-Benz (201, 202 four-valve technology), Ford, Opel, enault. A Code mm mm g S 021800 140 138 1 35.50 02180012 12 140 138 1 35.50 627 forged, curved jaws with milled grip, for accessing tight-fitting, awkwardto-reach heater plug connectors (e.g. BMW, Mercedes-Benz, Peugeot, enault, Seat, VW/Audi). Heater plug socket pliers 50 for size 20.8 mm (No 46; 51; 51S). ubber insert 090001 5 5 1. 76530004 220 262 1 49.70 46-12 Socket extra deep, bi-hexagon, size 12 mm, 3 /8" a-drive, use on glow plugs of diesel engines. 02020012 BMW: 324d; 524d 57 13.00 291 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

% & Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com Testing tools for car electrics 12905 Car circuit tester for car electrics 6 12 volt and 24 volt, with pointed probe, cover cap, connecting lead with alligator clip. Wheel braces DIN 3119/ISO 6788, forged centre section, pressed-in extension arms with extra deep forged socket heads, Chrome Alloy Steel, chrome plated. 77380001 120 73 7.15 7756 Testing unit for electric and electronic car components, 3 48 volt, 2 EDs to indicate voltage and plus or minus pole, complete in Pc-bag. Content: 1 basic unit with 1.5 m cable, testing tip, integrated mechanical sliding needle, 1 crocodile terminal, 1 jaw clamp Automotive voltage tester (complete set) 77560001 85 1 47. 7755 Crocodile terminal 77550001 12 1 7.55 A Code No mm/" mm g S 43030006 35c cars 17; 19; 22; D 1 /2" 400 2058 1 87.50 43030005 34c HGVs 24; 27; 32; D 3 /4" 700 5053 1 135.00 Tyre levers Handy, sturdy construction, purposefully shaped, Chrome Alloy Steel. Code No mm g S 740400 39 cars 400 383 5 22.50 740600 39/1 HGVs 600 897 5 33.80 740602 39/2 HGVs 600 1172 5 26.60 740603 39/3 HGVs 600 642 5 22.60 51S e Socket P Q extra deep, DIN 3124/ISO 2725-1, E DIN EN 37, E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated. & Special tools for brakes and wheels ES 721/15/3/2 t1 t 2 d 3 A d 1 d 2 d 3 t 1 t 2 Code mm/" mm mm mm mm mm mm g S 03240208 20.8-13 /16 1 ) 27.7 26 20 83 22 66.2 196 20.40 1 ) with rubber insert for spark plugs and for tightening and untightening wheel nuts on Japanese cars 530 x 350 x 40 mm, 6 pieces Code g 96838172 5012 511.75 No 2309K 1/2" a sizes 17; 19; 20.8 mm- 13 /16" No 721/15 30 150 N m No 35c cars 17; 19; 22; D 1 /2" No 599/2 245 mm 83812087 Empty tray 299 21.50 292 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com & 2309 c IMPACT sockets 1/2" a-drive, for power drivers, extra deep, with reduced outside diameter, Chrome Alloy Steel, gunmetal finish. 613/2* Brake spring pliers for fitting and removing the retaining springs on drum-brake pads, e.g. Mercedes-Benz, Type 168, A Class, enault Clio and Twingo from August 2002. A d 1 d 2 t Code mm mm mm mm mm g S 23090017 17 25.7 30 85 68 242 5 25.00 23090019 19 28.2 30 85 67.5 257 5 25.00 23090208 20.8 30.7 30 85 66.5 272 5 28.00 23090022 22 32 30 85 66.5 311 5 28.00 for wheel nuts 2309K with plastic sleeve. Sleeve extension protects not only wheel bolts and nuts but also the wheel and holes. c Wheel nut sockets A a O Code mm " mm mm g S 230917 17 1/2 87 32 242 1 31.50 230919 19 1/2 87 32 250 1 33. 23091208 20.8 1/2 87 32 265 1 32.80 599/2 registered design, with cutter for cutting and trimming lead weights (with or without adhesive foil), Chrome Vanadium, chrome plated. Balance weight pliers 76294003 245 319 1 49.40 613 for rivetted brake linings/shoes, Chrome Vanadium, bright nickelplated. Brake spring pliers 76413001 2 245 6 24.60 76413002 330 380 6 31.50 613/1 with flexible anvil, for rivetted and glued brake linings/shoes. Brake spring pliers 76413021 330 461 2 54.00 76413022 235 221 1 44.80 * to be discontinued 12371 Brake calliper file for removing dust, rust and dirt from brake calliper groove. 745401 260 4 5 31.30 12373 special slim design. Steel wire brush Code mm ows g S 77440001 230 2 70 8.15 12900/2N Brake disc gauge DIN 862, for measuring the thickness of car and motorcycle brake discs in situ, stainless steel, with locking screw and trailing vernier scale (1/ mm), in wooden storage box. measuring range throat depth Code mm mm g S 773703 60 55 233 1 5.00 49-9 INHEX socket for hexagon socket head screws, size 9 mm, 3/8" a-drive, for brake calliper retainers. 021509 BMW, MINI 62 5 8.65 54-7 INHEX socket for hexagon socket head screws, size 7 mm, 1 /2" a-drive, for changing brake linings. 03050007 BMW: 518, 520i, 525i, 528i 75 5 8. 293 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

& / Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 733/-11 OPEN-ING insert tool size 11 mm, use with SEVICE-MANOSKOP torque wrench No 730/5, for flare nuts on brake lines and bleed screws. 54CV Screwdriver sockets for spline socket head screws (ibe CV), length 60 mm, 1 /2" a-drive, for brakes and cylinder head bolts. 582311 Mercedes-Benz 55 1 29.20 733/-12 OPEN-ING insert tool size 12 mm, for flare nuts on brake pressure regulator, tightening torque 15 18 N m. 582312 BMW 59 1 29.20 Code size Type g S 03090007 M7 Fiat 78 5 12. 03090009 M9 Fiat (1.2 l; 8V/16V) 92 5 13.30 03090013 M13 Fiat, Alfa (e.g. 1.6 l; 16V) 123 5 15.70 / 15 Special tools for lubrication service Oil filter claw for loosening of oil filters on cars. 733/-14 OPEN-ING insert tool size 14 mm, for flare nuts on main brake cylinder, tightening torque 16 25 N m (BMW), for flare nuts on brake lines and bleed screws (Mercedes-Benz). 582314 BMW, Mercedes-Benz 60 1 29.20 733/-17 OPEN-ING insert tool size 17 mm, for flare nuts on main brake cylinder, tightening torque 16 25 N m. 582317 BMW 64 1 29.20 733/-19 OPEN-ING insert tool size 19 mm, for flare nuts on main brake regulator, tightening torque 30 40 N m. a Clamp. width total height length of claws Code " mm mm mm g S 74620002 3/8 68 120 65 50 530 1 79.00 3045 Special socket for oil filters, size 74 mm, 14-point, mm dia. bore and outside hexagon 22 mm Ø. 582319 BMW 80 1 29.20 54CV/9 for spline socket head screws (ibe CV), for brakes and cylinders head bolts. Content: M5; M6; M7; M8; M9; M; M12; M13; M14 Set: Screwdriver sockets total height 74370001 52 131 1 14.40 3045K Special socket for oil filters, size 74 mm, 14-point, mm dia. bore and outside hexagon 22 mm Ø, extremely compact essential where access is awkward. 96030901 Fiat, Alfa 1420 1 123.25 total height Code mm Type g S 74370003 44 e.g. Ford Mondeo from 02/2002 4 1 14. 294 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com / 3046 for fitting and removing oil filter covers when changing oil filter cartridges. Special sockets 765-12 Hexagon key wrench Fiat-No A 5013 long, for hexagon socket head screws, size 12 mm, for oil drain plug on engine, gearbox and rear axle. A a Code mm " Type g S 021132 32 3/8 e.g. Audi, MAN, Vauxhall Astra, Corsa, VW Passat 130 1 16.20 021136 36 3/8 e.g. BMW, Mercedes-Benz cars, 0 D Transporter, MAN, Vauxhall Vectra B DI 16V, VW upo 1.2 TDi, model year 99 171 1 19.40 12005 for oil filters etc., up to 140 mm diameter. Strap wrenches 432012 Fiat 287 5 5.60 54-13 INHEX socket for hexagon socket head screws, size 13 mm, length 70 mm, 1 /2" a-drive, for oil drain plug on engine. 03150713 ancia 130 5 22.80 58 bent, size 8 and mm outside square, for drain plugs on sump, gearbox, differential. Oil service spanner Code No mm g S 76500001 12005 450 264 1 23.30 79150001 12005/1 1 ) 450 68 1 9.00 1 ) spare strap 12007 Oil filter wrenches adjustable for diameters 80 1 mm. Hardened anti-slip cams ensure safety during use. 447308 Peugeot, enault 314 5 19.60 54KK-5 INHEX socket with ball-point hexagon, size 5 mm, length 238 mm, 1 /2" a-drive, for use on socket head screws with difficult access up to an angle of 25, size 5 mm for use on sump screws of 5 cylinder diesel engine, van T4. 033005 VW/Audi 145 5 17.70 12007/1 12007/2 54KK-8 size 8 mm, length 238 mm. INHEX socket Code No mm g S 765201 12007/1 1 ) 150 226 1 27.00 765202 12007/2 2 ) 240 319 1 33.00 1 ) with 1 /2" a 2 ) with lever handle 033008 VW/Audi 154 5 20.00 54-14 INHEX socket for hexagon socket head screws, size 14 mm, 1 /2" a-drive, for use on oil drain plug. 03050014 Mercedes-Benz 135 5 11.00 295 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

( Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com ( 12735 Special tools for engine and gear transmission Clutch alignment tool 8-piece set, contains 1 clutch alignment mandrel, length 220 mm; 1 combined sliding taper/cylindrical bush, cylindrical bushes from 22.2 25.2 mm; 1 sliding cylindrical bush, tapered at both ends, cylinder diameters 16 21 mm; 5 cylindrical bushes, two sizes each, cylinder diameter 12 20 mm, in wooden storage box 255 x 81 x 38 mm. 730N/5 SEVICE-MANOSKOP torque wrench 50 N m, with tool carrier for insert tools, for tightening ZF switch-gear and adjustment brake belt BW 65 on automatic gearbox, to use with ratchet insert tool No 735/. 501805 BMW 831 1 233.00 735/ reversible, 1 /2" a-drive. atchet insert tool 74480000 650 1 1.00 50TX-E Socket for external TOX screws, size E, 1 /2" a-drive, use on mounting screws for GETAG 260 gearbox, as well as on automatic gearboxes fitted to US and Japanese models. 032700 BMW 53 8.50 50TX-E12 size E12 Socket 03270012 BMW 55 8.55 50TX-E14 size E14 Socket 03270014 BMW 56 8.80 54TX-T27 Screwdriver BIT for inside TOX screws, size T27, 1 /2" a-drive, use on switchgear of automatic gearbox 3HP 22, 4HP 22. 030027 BMW 72 5.50 1418 BIT for inside TOX screws, size T27, 1 /4" E-drive, use on switchgear on automatic gearbox 3HP 22, 4HP 22. 08130027 BMW 6 2.90 582500 147 1 61.00 6547 use on retaining ring on gearbox main shaft (all "GETAG" and ZF gearboxes S4-18/3). Special circlip pliers 65474170 BMW 154 1 27.30 3049-8 INHEX socket for hexagon socket head screws, size 8 mm, length 24 mm, 3 /8" a-drive, for use on mounting screws on fluid fly-wheel. 02152408 Mercedes-Benz 28 5 9.20 51-27 Socket extra deep, bi-hexagon, size 27 mm, 1/2" a-drive, for rotating engine through hexagon on crankshaft. 03020027 Mercedes-Benz 294 5 20.70 54- INHEX socket for hexagon socket head screws, size mm, length 140 mm, 1/2" a-drive for bolts on car engines. 031514 Mercedes-Benz 150 5.40 296 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

( ) Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 160-1a Internal puller capacity 16 20 mm, for sealing ring and bearing on crankshaft, use with counter stay No 161-1. 71160021 Mercedes-Benz 120 1 43.50 161-1 Counter stay 71170011 654 1 41.40 160-2 Internal puller capacity 20 27 mm, for bearing bush of idler gear on oil pump drive, use with counter stay No 161-2. 71160012 Mercedes-Benz 131 1 49.00 161-2 Counter stay 12717 Pin wrench offset, distance between pins 18 mm, pin dia. O 2.9 mm, length 140 mm, for ring nut of tension pulley on 1.6 l diesel. 44700018 2/80 Golf, Jetta, Passat, Audi 80 75 9.60 ) 157 Special tools miscellaneous infinitely adjustable, with twist handle, also suitable for special steel pipes up to 1.8 mm wall thickness, chain length 270 mm. Chain exhaust-pipe cutter G 601001 25 75 705 1 112.00 K157 Chain 69130001 183 1 80.50 1225 Special extension curved, for use on magnetic switch diesel pump. D Code " g S 12250001 3/8 128 5 17.90 71170012 1500 1 64.00 730/2 capacity 4 20 N m. SEVICE-MANOSKOP torque wrench 50180002 VW/Audi 315 1 187.00 734/5 3/8" a-drive, for use with SEVICE-MANOSKOP torque wrench No 730/2. Square drive insert tool 58240005 VW/Audi 76 1 23.40 614 for self tightening hose clips, nickel-plated. Hose clip pliers 76460000 220 293 1 27. 615/1 for CIC hose clips e.g. Alfa omeo, Audi, BMW, Opel, Peugeot, VW. Work can be carried out at various angles due to stepless swivelling jaws. Hose clip pliers CIC 76460013 200 189 1 40.60 297 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

) Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 623/1 Hose clip pliers registered design, with rotating jaws and multiple locking positions, single-handed use even with wide openings due to variable-geometry joint, especially for 12 and 15 mm wide, large-format hose clips, e.g. for Alfa omeo, Audi, Citroën, Fiat, Ford, Mercedes-Benz, Opel, Peugeot, Porsche, enault, VW. 76460012 290 414 1 62.00 623/2 Hose clip pliers registered design, with Bowden cable and multiple locking positions, especially for 12 and 15 mm springsteel hose clips, suitable for use near cooling and heating systems up to a diameter of 42 mm, access to hardto-reach places using Bowden cable remote action (length 6 mm), e.g. for Alfa omeo, Audi, Citroën, Fiat, Ford, Mercedes-Benz, Opel, Peugeot, Porsche, enault, VW. 76540001 300 565 1 7.00 eplacement Bowden cable for No 623/2 79540001 120 1 31.80 625 Ear clamp pincers for application of 1 and 2-ear clamps on shaft sleeves, radiator and fuel lines e.g. for Audi, BMW, Ford, GM, Honda, Mazda, Mercedes-Benz, Nissan, Opel, VW, quality steel, black paint finish. 76540002 225 340 1 25.50 625/2 Hose clip pliers for correctly closing hose clips without ears, for shaft sleeves on Audi, Mercedes-Benz, Toyota and VW. Quality steel, nickel-plated, jaws gunmetal finished. 76540003 200 173 1 41.60 12001-1* Thread taps M 20 x 1.5; for fast, accurate tapping of aluminium union nuts for air-conditioner cooling hoses for cars and other hydraulic connectors, e.g. for Audi, Opel, VW. Patented, with inner bore for holding hose collar, made of high-grade HSSG M2 steel. 13 mm hex drive for a T-bar or ratchet with a 13 mm socket. 720005 125 164 1 5.00 * to be discontinued 12718 Flat scraper special steel, for removal of gasket seals on carburettor, valve cover, cylinder head etc. 720301 265 128 5 16.90 12763 with T-bar, chromium-plated, black dip-coated, for pulling rubber loops on exhaust mountings. All cars except Ford. Pull hook for rubber exhaust mountings 74200001 2 0 5 12.70 12771 Extractor pliers for removing fixing plugs on door trims, outside trims, rubber bumper covers etc. Joint and jaws made of hardened sheet steel, handles made of shaped sheet steel. 76480001 230 182 1 31.90 12975 Fuel hose clamp capacity up to Ø 20 mm, for stopping fuel flow temporarily. 74340001 38 6.95 298 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com ) 1435 BIT U for inside TOX screws, size T55, 5 /16" E-drive, for screws in rear seats, for use with bit-holder insert tool No 736/40. 08140055 BMW: X6 Modell E71, 7er Serie Modell F01/F02 20 5.50 736/40 BIT holder insert tool Internal hex drive 5 /16", for screws in rear seats, for use with bit No 1435. 440-19 size 19 mm. COW-ING spanner 02190019 40 1 39.50 440-22 size 22 mm. COW-ING spanner 02190022 57 1 41. 440-24 size 24 mm. COW-ING spanner 02190024 57 1 41. 582640 BMW: X6 Modell E71, 7er Serie Modell F01/F02 112 1 37.50 1445 BIT for inside TOX tamper resistant screws, size T30, 1/4" E-drive, use on sensor screws wheelhouse (models with airbag system). 08160030 BMW 6 4.15 12506-6 flexible, size 6 mm, for screws on hose clips of radiator hose, max. tightening torque 8 N m. Hexagon nut spinner 430206 BMW 167 14. 440-17 COW-ING spanner size 17 mm, 3 /8" a-drive, for use on pipes for air conditioning unit. 02190017 Mercedes-Benz 40 1 40.30 735/20 reversible, 1 /2" D-drive, use with SEVICE-MANOSKOP torque wrench No 730/12 and 730/20, for general service work. atchet insert tool 58250020 Mercedes-Benz 302 1 65.50 730/5 capacity 6 50 N m, 3 /8" D-drive, for general service work. SEVICE-MANOSKOP torque wrench 96502005 Mercedes-Benz 945 1 261.00 730/12 25 130 N m, 1 /2" D-drive SEVICE-MANOSKOP torque wrench 96502012 Mercedes-Benz 14 1 290.50 730/20 40 200 N m, 1 /2" D-drive. SEVICE-MANOSKOP torque wrench 96502020 Mercedes-Benz 1555 1 308.50 299 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

) Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 160-1 Internal puller capacity 12 16 mm, for use on bearings, seals and bushes. 12506-7 Hexagon nut spinner flexible, size 7 mm, for screws on hose clips of radiator hose, max. tightening torque 8 N m. 711611 Mercedes-Benz 1 1 43.50 160-2 capacity 20 27 mm. Internal puller 71160012 Mercedes-Benz 131 1 49.00 160-3 capacity 27 36 mm. Internal puller 71160013 Mercedes-Benz 365 1 52.00 160-5 capacity 36 46 mm. Internal puller 71160015 Mercedes-Benz 385 1 72.00 160-6 capacity 46 58 mm. Internal puller 71160016 Mercedes-Benz 558 1 91.50 161-1 Counter stay for Internal Puller No 160/0 2, for use on bearings, seals and bushes. 430207 Mercedes-Benz 168 14.20 760CV- 2,5 17 Fiat No A 89601 up to A 89611 for hexagon socket head screws, size 2.5 mm up to 17 mm (see page 204). 720Nf/80 capacity 160 800 N m, 3 /4" a-drive. Hexagon key wrench Standard-MANOSKOP torque wrench 50190081 VW: T Syncro 5650 1 736.00 730/5 capacity 5 50 N m, for general service work. SEVICE-MANOSKOP torque wrench 50180005 VW/Audi 805 1 202.00 732/-13 size 13 mm, for use with SEVICE-MANOSKOP torque wrench No 730/5. ing insert tool 582213 VW/Audi 55 1 27.00 735/ atchet insert tool reversible, 1 /2" D-drive, for use with SEVICE-MANOSKOP torque wrench No 730/5. 71170011 654 1 41.40 161-2 Counter stay for Internal Puller No 160/3 7. 71170012 1500 1 64.00 582500 VW/Audi 147 1 61.00 730/20 capacity 40 200 N m. SEVICE-MANOSKOP torque wrench 50180020 VW/Audi 1250 1 243.00 300 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com ) 735/20 reversible, 1 /2" D-drive, for use with SEVICE-MANOSKOP torque wrench No 730/20. atchet insert tool 58250020 VW/Audi 302 1 65.50 730/40 capacity 80 400 N m. SEVICE-MANOSKOP torque wrench 50180040 VW/Audi 1880 1 356.00 735/40 reversible, 3 /4" D-drive, for use with SEVICE-MANOSKOP torque wrench No 730/40. atchet insert tool Special tools for HGVs Wheel braces DIN 3119/ISO 6788, forged centre section, pressed-in extension arms with extra deep forged socket heads, Chrome Alloy Steel, chrome plated. A Code No mm/" mm g S 43030005 34c HGVs 24; 27; 32; D 3 /4" 700 5053 1 135.00 43030006 35c cars 17; 19; 22; D 1 /2" 400 2058 1 87.50 Tyre levers Handy, sturdy construction, purposefully shaped, Chrome Alloy Steel. 58250040 VW/Audi 5 1 97.00 1421 Bit screwdriver socket for inside TOX screws, outside E 1 /4" C 6.3 size T45, length 26 mm, for use on door hinges. Drive Tools: f.e. ratchet reversible No 725/4B and ratchet tap holder No 1820 or ratchet reversible No 725/4B and torque wrench. Code No mm g S 740600 39/1 HGVs 600 897 5 33.80 740602 39/2 HGVs 600 1172 5 26.60 740603 39/3 HGVs 600 642 5 22.60 740400 39 cars 400 383 5 22.50 68 Air filter claw for loosening of filter cartridges on air brakes (trucks). 08130045 VW: Golf III 8 3.60 a Clamp. width total height length of claws Code " mm mm mm g S 74620011 1/2 0 145 85 60 925 1 214.00 301 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 2509 c IMPACT sockets 3/4" a-drive, for power drivers, extra deep, with reduced diameter, Chrome Alloy Steel, gunmetal finish. 3678 4-pin socket length 72 mm, 1 /2" a-drive, for use on pressure nut of injector post. A d 1 d 2 t Code mm mm mm mm mm g S 25090027 27 40.5 44 0 72.5 672 2 45.90 25090030 30 44.3 44 0 72.5 728 2 49.70 25090032 32 46.8 44 0 72 778 2 53.00 25090033 33 48 44 0 72 803 2 54.00 for Trilex wheels 038001 Mercedes-Benz 153 5 34.20 54- INHEX socket for hexagon socket head screws, size mm, length 140 mm, 1/2" a-drive, for cylinder head bolts. 2609 c IMPACT sockets 1" a-drive, for power drivers, extra deep, with reduced outside diameter, Chrome Alloy Steel, gunmetal finish. A d 1 d 2 t Code mm mm mm mm mm g S 26090027 27 42.3 54 1 80 01 2 56.50 26090030 30 46 54 1 79.5 47 2 62.00 26090032 32 48.5 54 1 79 15 2 65.50 26090033 33 49.8 54 1 78.5 12 2 65.50 for wheel nuts 24-17x19 bi-hexagon, size 17 x 19 mm, for all threaded connectors on injector pipes. OPEN-ING spanner 481719 Mercedes-Benz 151 17.00 51-30 Socket extra deep, bi-hexagon, size 30 mm, 1 /2" a-drive, on injector post. 031514 Mercedes-Benz 150 5.40 3054X-M12 Screwdriver BIT for tri-square socket head screws (XZN), size 12, length 140 mm, Ø 11.5 mm, 1 /2" a-drive for cylinder head bolts with tri-square socket head M 12. 03261412 Mercedes-Benz 160 5 13.50 168-2 Piston ring compressor of special spring steel, infinitely variable adjustment, c/w adj. spanner, capacity Ø 90 175 mm. 74140003 Mercedes-Benz 309 1 36.20 55-30 Socket size 30 mm, hexagon 3 /4" a-drive, for U-bolt nuts, front. 03020030 Mercedes-Benz 341 5 21.00 440-27MB for setting of electronic injection on 440-HP-engines. COW-ING spanner 021927 Mercedes-Benz 92 1 49.70 050030 Mercedes-Benz 313 5 15.50 55-36 Socket size 36 mm, for U-bolt nuts, rear. 050036 Mercedes-Benz 386 2 16. 302 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329

Stahlwille products are available from MAYAND METICS P.O. Box 261 Owings Mills, MD 21117 USA web: http://mdmetric.com 24-x12 hexagon, size x 12 mm, for general service work. OPEN-ING spanner 4812 Mercedes-Benz 59 13.90 440-30 size 30 mm, 1 /2" a-drive for use on hydraulic pipe flare nuts. COW-ING spanner 03190030 Mercedes-Benz 155 1 51.50 540-19 size 19 mm, for use on new push connector for pneumatic installations on new light-weight truck series. COW-FOOT spanner 02200019 Mercedes-Benz 64 1 28. 730/40/32 Torque wrench set 32 pieces, in steel case, for general service work. Content: 1 SEVICE-MANOSKOP No 730/40, 80 400 N m, 1 ratchet insert tool No 735/20, reversible, 1 /2" D-drive; 1 square drive insert tool No 734/20, 1 /2" D-drive; 7 o/e insert tools No 731/40, sizes 13, 15, 17, 19, 22, 27, 30 mm 1 No 3731/40 size 24 mm; 7 ring insert tools No 732/40, sizes 13, 15, 17, 19, 22, 24, 27 mm sockets, bi-hexagon No 50, sizes 13, 14, 15, 17, 19, 22, 24, 25, 30, 32 mm 4 accessories, 1 /2" a-drive: 1 T-handle No 506 1 extension 255 mm No 509/ 1 extension 130 mm No 509/5 1 extension 55 mm No 509/2 96502053 Mercedes-Benz 9739 1 1189.70 54/12 for hexagon socket head screws, in steel case, for general service work. Content: 12 INHEX sockets No 54, sizes 4, 5, 6, 7, 8,, 12, 14, 17, 19 mm, No. 3054/8, No 54/, 1/2" a-drive. Set of INHEX sockets 540-24 size 24 mm. COW-FOOT spanner 96030503 Mercedes-Benz 2131 1 147.45 02200024 60 1 38.70 730/2 capacity 4 20 N m, 3 /8" D-drive, for use on new push connector for pneumatic installations on new light-weight truck series. SEVICE-MANOSKOP torque wrench 721Nf/80 capacity 160 800 N m, 3 /4" D-drive, for general service work. Standard-MANOSKOP torque wrench 50200081 Mercedes-Benz 6770 1 945.00 96502002 Mercedes-Benz 455 1 246.00 303 Maryland Metrics email: sales@mdmetric.com FQ form: http://mdmetric.com/rfq.htm ph: (4)358-3130 (800)638-1830 fx: (4)358-3142 (800)872-9329