HV gate valve Series 11 Main applications General purpose valve for isolation in high vacuum systems Especially suited to pump isolation Ordering information Valve with manual actuator crank handle Ordering numbers ISO-F metric threads UNF threads S-LP JIS 1-PE01 1-E01 1-UE01 1-TE01 1-JE01 1-PE01 1-E01 1-UE01 1-TE01 1-JE01 10-PE01 10-E01 10-UE01 10-TE01 10-JE01 1-PE01 1-E01 1-UE01 1-TE01 1-JE01 1-PE01 1-E01 1-UE01 1-TE01 1-JE01 1-PE01 1-E01 1-UE01 1-TE01 1-JE01 0-PE01 on request on request 0-TE01 0-JE01 with position indicator: 1.. -. E0 Valve with pneumatic actuator double acting with solenoid valve with position indicator Ordering numbers (specify control voltage) ISO-F metric threads UNF threads S-LP JIS 1-PE 1-E 1-UE 1-TE 1-JE 1-PE 1-E 1-UE 1-TE 1-JE 10-PE 10-E 10-UE 10-TE 10-JE 1-PE 1-E 1-UE 1-TE 1-JE 1-PE 1-E 1-UE 1-TE 1-JE 1-PE 1-E 1-UE 1-TE 1-JE 0-PE on request on request 0-TE 0-JE without solenoid valve, without position indicator: 1.. -. E1 without solenoid valve, with position indicator: 1.. -. E2 with solenoid valve, without position indicator: 1.. -. E (specify control voltage) Further ordering information on next page www.vatvalve.com K1
Features ody material: stainless steel Low-cost bellows sealed valve with vulcanized seal (no dead volumes at the gate seal): see glossary Functional principle Series 11 1 Gate all pairs 7 Spring stop 2 ounter-plate 5 all detents Valve seat side Leaf springs Gate seal Technical data 1) Maximum values: depending on operating conditions and sealing materials Leak rate: valve body, valve seat < 1-9 mbar Is -1 Pressure range 1 - mbar to 1. bar (abs) 1 - mbar to 1.2 bar (abs) ifferential pressure on the gate 1. bar 1.2 bar ifferential pressure at opening 0 mbar ycles until first service 000 Temperature 1) Valve body Manual and pneumatic actuator Solenoid valve 50 Position indicator 50 Further technical data on next page ontinued Ordering information Valve with -position pneumatic actuator double acting with solenoid valve with position indicator ISO-F Ordering numbers (specify control voltage) metric threads UNF threads S-LP JIS 1-PE 1-E 1-UE 1-TE 1-JE 1-PE 1-E 1-UE 1-TE 1-JE 10-PE 10-E 10-UE 10-TE 10-JE 1-PE 1-E 1-UE 1-TE 1-JE 1-PE 1-E 1-UE 1-TE 1-JE 1-PE 1-E 1-UE 1-TE 1-JE 0-PE on request on request 0-TE 0-JE without solenoid valve, with position indicator: 1.. -. E2 K1 www.vatvalve.com 5
HV gate valve Series 11 ontinued Technical data Heating and cooling rate 50 h -1 Material Valve body ISI 0 () Mechanism ISI 1L (1.0) ISI 0 () ellows ISI (M50) Seal: bonnet, gate FKM (Viton ) Feedthrough Mounting position Solenoid valve bellows any Position indicator: contact rating Voltage 0 V urrent max. m Valve position indication 2 V, 5. W (others on request) LE Valve with manual actuator Valve with pneumatic actuator (nominal I..) Standard flanges onductance (molecular flow) (depending on dimension and flange type) Turns per stroke Weight ompressed air min. max. overpressure Volume of pneumatic actuator losing or opening time Weight ls -1 n kg lbs bar psi l ft s kg lbs 00 7 1 7 5 2 0.09 0.00 1 7 1 Sse pages 50 51 75 1 7 5 2 0.09 0.00 1 1 1 70 1 22 7 5 2 0.7 0.005 1.5.5 2 5 17 27 7 5 2 0. 0.005 2.5 1.5 0 1 90 17 21 7 7 5 2 0. 0.0092.5 21 7 27 1 2 5 5 7 7 2 0.50 0.0.5 9 955 2 5 5 7 7 2 0.0 0.0 5.5 5 Options ia. 1 ctuator Solenoid valve for impulse actuation: last valve position is maintained at power failure Solenoid valve separate, for external mounting Other solenoid valve voltage (standard: 2 V ) Manual emergency operation on solenoid valve lockable -position pneumatic actuator for throttling (ia. 1): ordering information on page 5, technical data on request www.vatvalve.com K1
Series 11 ia. 2 O-ring seal Valve ustomer specified flanges with / without watercooling Other sealing materials Vulcanized seal O-ring seal in gate (ia. 2) with,,, (standard: vulcanized seal) See glossary Ports for roughing (by-pass), venting or for gauges (ia. ), possible in positions and ia. valve Recoended port ISO-KF X Y Other ports on request 0 0 0 0 0 0 0 1. 1. 5.07.2 5 1.19 1. Window in gate with,,, (ia. ): screwed, window material: e. g. borosilicate, elastomer seal ia. 1 Valve body 5 Screwed window 2 Gate retainer Elastomer seal Valve seat side Window valve Optically free diameter «S» 0 1.57 1.9 2.7 90.5 Thickness of glass 0. 0. 0.2 0.2 Ordering information for options: Ordering No. of valve-x (e. g. 10-E-X, X = port ISO-KF 0 in position ) Spare parts Seals on request (specify fabrication number of valve) ccessories Heater on request (specify fabrication number of valve) Flange connections for installation of the valve: see series 2 and K1 www.vatvalve.com 7
HV gate valve Series 11 Main dimensions Valve with manual actuator: crank handle (2½" ") Valve with manual actuator: crank handle (" ") g Required for dismantling e Mechanical position indication d Leak detection hole i For attachment Projection E Flange dimensions: see pages 50 51 K L M N O O1 P Q S T U W 90.0. 5 2.09 179 7.05.0.91.0. 0 2. 11 0..0.1 9.50 7.50.01 90.0. 5 2.09 179 7.05.0.91.0. 0 2. 11 0..0.1 9.50 7.50.01 72.0 1.1 9 2.72 2 9.7 5. 1.0 5.0 0 2. 190 7. 9 0.5 179. 7.0 9.50 7.50.01 01.0 2. 9.50.72 2.0.9 5.07 1. 7.2 0 2. 2. 25 0.9..00 9.50 92.50. 1 1.22.0 2.95 1.72.50 1.2 9. 9.0 0 2. 50 1.7.50 1.52 2.0 7.97.90.0 1 1.1 55. 11. 5.50 21. 0 1.9 21. 75 2.95 00.75 7 2. 2. 9.72.90 7 2.7 5 2.1 7.0 2.1 19 7. 1 27.0 1.5 9.59 90.5 550 21.5. 0.90 11.9.90 7 2.7 www.vatvalve.com K1
Main dimensions Valve with pneumatic actuator: double acting (2½ ) Valve with pneumatic actuator: double acting ( ) Series 11 g Required for dismantling b ompressed air connection c Electrical connection f Position indicator d Leak detection hole i For attachment Projection E Flange dimensions: see pages 50 51 K L M N O O1 P Q S T U W 29..9 5 2.09 1 7..0.91.0. 0 2. 11 0. 1. 5.7 9.50 7.90.11 29..9 5 2.09 1 7..0.91.0. 0 2. 11 0. 1. 5.7 9.50 7.90.11 09 1. 9 2.72 2. 9. 5. 1.0 5.0 0 2. 190 7. 9 0.5 1..72 9.50 7.90.11 52.59 9.50.72 2.0.9 5.07 1. 7.2 0 2. 2. 25 0.9 19.0 7.5 9.50 7.90.11 1 1.22 07.90 2.9 1.72.50 1.2 9. 9.0 0 2. 50 1.7.50 1.52 195.0 7.9.90.90.0 1 1.1 77.0 0. 11. 5.50 21. 0 1.9 21. 75 2.95 00.75 7 2. 29. 9..90.90.0 5 2.1 9.29 19 7. 1 27.0 1.5 9.59 90.5 550 21.5. 297 11.9.90.90.0 K1 www.vatvalve.com 9
HV gate valve Series 11 Flange dimensions ISO-F (2½" ") 5. 1. 5.71 5.92 7 2..50 5.71.9 225. 7.7 25 11.22.2 7.7. 50 1.7. 21.2.9 25 1.7 95.55 0.05 E F M M M M M M M G H I 1 1.27 0. 1 2.02 0. 1.02 5 0. 21.9 5 0. 1 0.71 1.52 5 0., metric threads (2½" ") O.. ½ ⅝ 11.50.7 92.. 117.50. 2.0.0 7 2. 1.0 5.97. 5.1.9 2.0 7.97 11 7.1. 25. 9.97 21. 9.1 7.7.9 50 1.7 2 11.1 25.00 E F M M 1 M M 2 M 2 M H1 H2 2.50.25 77.0.05 91.5.1.0.0 1..75 1.50.55 171.5.75 1.5 222.0.7 217.5 27..75 27 1, UNF threads (2½" ") *) *) O.. ½ ⅝ 1 ¼ E F H1 H2 11.50.7 92.. 5 / 1" 2 UNF 2.50.25 77.0.05 117.50. 2.0.0 7 2. 5 / 1" 2 UNF 91.5.1.0.0 1.0 5.97. 5.1.9 1 5 / 1" 2 UNF 1..75 1.50.55 2.0 7.97 11 7.1 5 / 1" 2 UNF 171.5.75 1.5. 25. 9.97 21. 9.1 7.7 2 5 / 1" 2 UNF 222.0.7 217.5.9 50 1.7 2 11.1 25.00 2 5 / 1" 2 UNF 27..75 27 1.9 50 1.7 0.0.0 25.00 0 / " 2 UNF 29. 11.0 2.0 11.5 Projection E *) O.. " VT standard, O.. 1 ¼" option Ordering information for option: O.. 1¼" Ordering No. of valve-x (e. g. 1-UE-X, X = O.. 1¼") 50 www.vatvalve.com K1
Flange dimensions S-LP (2½" ") with or without O-ring groove Series 11 S-LP 2 For orders with O-ring groove specify:, or «+» E F G H O-ring I.. d 2.0.00 1..75 ⅜" 1 UN 1.90.50.9.5..19 177. 7.00 19. 5.50 7 2. ⅜" 1 UN.90.50.9.5..19 190.50 7.50 2.0.00.9 ⅜" 1 UN 1.5.75 225. 190.50 7.50 ⅜" 1 UN.75.25. 279.0 11.00 21.0 9.50 7.7 ¾" UN 19 0.75.0.1.9 50 1.7 29.50 11.75 25.00 ¾" UN 19 0.75 2..50 1.72 25 1.7 2 1.25 00 11.1 ¾" UN 19 0.75 17.50.50 1.2.5..5 2.79.5 2.29.5 1.7 7.00.7.19.2.19 7.9.19..19.7.275 JIS 2290: 1 / ISO 9 5 00 (2½" ") 5 1 5.5 1.72.50 5.1 7 2. 7.2.0.9 25 9.25 2.27 00 11.1 2. 7.7. 50 1.7.0 21.2 00.9 25 1.7 1.57 0.05 E F M M M M M M M G 1 1 1 1 1 0. Projection E K1 www.vatvalve.com 51