Embroidery Hooping Equipment Price Guide www.pfequipment.com 718 Carlton Rd. Stokesdale, NC 27357 336-548-6598 336-548-6599 Fax 336-548-6598 1 www.pfequipment.com
Ordering Information Hours P & F Equipment Co., Inc. is open from 8:00 A.M to 4:30 P.M EST to take your phone order or answer any questions. Our phone number is 336-548-6598. During non business hours, please feel free to email us at info@pfequipment.com. All email will be answered as soon as possible. Also please feel free to browse our online catalog at www.pfequipment.com. Ordering All orders can be placed by any of the following methods: Shipping Phone: 336-548-6598 Fax: 336-548-6599 Email: orders@pfequipment.com Web: www.pfequipment.com All order are shipped via UPS or ABF Freight Systems unless otherwise specified. Customers are responsible for all shipping and associated charges. All items are shipped from Stokesdale, NC, unless otherwise noted. Pricing Prices are subject to change at any time without advance notice. P&F Equipment Co., Inc. will not be held accountable for pricing errors in this catalog or on our web site. Please contact us for prices on items not found in this catalog or on volume discounts. Prices in this catalog and on our web site do not include shipping charges. Please visit our web site, www.pfequipment.com for the most up to date product information and pricing. 336-548-6598 2 www.pfequipment.com
Bridge Heads & Accessories Table of Contents Bridge Heads (900 & 700 Series). 4 900 Series Reinforcement Lexan Plates 4 Replacement Lexan Plate. 4 Tables & Accessories Table Tops (800 & 600 Series) 5 Aluminum Support Tables. 5 Backing Clip Kits. 5 Shirt Board Form. 5 Cylinder Arms & Accessories Cylinder Arms w/ Base 6 Cylinder Arm Top Plates.. 6 Cylinder Arm Base 6 Head & Table Quick Change Sets Quick Change Head & Table Sets.. 6 Head and Table Packages Package 1 8 7 Package 9 14.. 8 Package 15 21. 9 Package 22 25. 10 Custom Package. 10 P & F Frame Press & Parts Frame Press w/package 11 Frame Press Only 11 Frame Press Parts 11-12 P & F Cap Press Standard Cap Press.. 13 Compact Cap Press.. 13 Cap Frames EMS Hoop Tech Cap Frames. 13 Cap Frame Gauge 13 Terms and Conditions 14 Credit Card Authorization Form.. 15-16 336-548-6598 3 www.pfequipment.com
Bridge Heads All of our bridge heads are CNC machined from clear, durable lexan. The heads are etched for precise alignment and wired with crosshairs for dead center placement. 1. 900 Series Bridge Head....... $247.50 The 900 series bridge heads are machined to fit any brand or size hoops. 3.5cm, 5.5cm, 7.5cm, 8.5cm, 9cm, 10cm, 12cm, 13cm, 15cm, 16cm, 18cm, 21cm *must be able to fit in 12 x 12 table* Tajima, Melco, Barudan, Happy, Toyota, SWF, Allied Gridlock, Durkee, Brother, etc Heads are not interchangeable, they are a matched set with the hoops You will need a head for each hoop size that you want to use If we haven t already made a head to fit your hoop then send us one and we can machine one to fit at no additional cost 2. 900 Series Lexan Reinforcement Plate..... $25.00 This is a reinforcement lexan plate for the 900 series heads If you do a lot of thick or hard to hoop items this can eliminate your bridge head from breaking under the stress 3. 900 Series Lexan Plate........ $137.50 This is a replacement lexan plate for the 900 series heads 4. 700 Series Bridge Head....... $324.50 The 700 series bridge heads are machined to fit any brand or size hoops. 24cm, 30cm, 290/300cm, 413/342cm, 475/450cm, or any other oval, rectangle, or square size hoops Tajima, Melco, Barudan, Happy, Toyota, SWF, Allied Gridlock, Durkee, Brother, etc Heads are not interchangeable, they are a matched set with the hoops You will need a head for each hoop size that you want to use If we haven t already made a head to fit your hoop then send us one and we can machine one to fit at no additional cost 5. 700 Series Lexan Plate........ $214.50 This is a replacement lexan plate for the 700 series heads 336-548-6598 4 www.pfequipment.com
Table Tops All of our tables are CNC routed from ¾ and 1 HDPE color core plastic. The tables are engraved for precise alignment and dead center placement. We also cut a recessed garment groove in all the tables to allow the hoop to be seated all the way up on the tubular and double high hoops. 6. 800 Series Table Tops..... $176.00 The 800 series tables are machined to fit any brand or size hoops. 3.5cm, 5.5cm, 7.5cm, 8.5cm, 9cm, 10cm, 12cm, 13cm, 15cm, 16cm, 18cm, 21cm *must be able to fit in 12 x 12 table* Tajima, Melco, Barudan, Happy, Toyota, SWF, Allied Gridlock, Durkee, Brother, etc Tables are not interchangeable, they are a matched set with the hoops You will need a table for each hoop size that you want to use We also can custom machine any size or shape table to fit your needs If we haven t already made a table to fit your hoop then send us one and we can machine one to fit at no additional cost 7. 600 Series Table Tops..... $313.50 The 600 series tables are machined to fit any brand or size hoops. 24cm, 30cm, 290/300cm, 475/450cm, or any other oval, rectangle, or square size hoops Tajima, Melco, Barudan, Happy, Toyota, SWF, Allied Gridlock, Durkee, Brother, etc The 600 series tables are usually machined with a neck and shoulders for shirt or jacket alignment, but can be made square upon request Tables are not interchangeable, they are a matched set with the hoops You will need a table for each hoop size that you want to use We also can custom machine any size or shape table to fit your needs If we haven t already made a table to fit your hoop then send us one and we can machine one to fit at no additional cost 8. Aluminum Support Table... $126.50 This is the support table for the 600 and 800 series table tops 800 series tables smaller then 12 x 12 will require a smaller 4 x 8 aluminum support table You must have at least one aluminum table to operate the press. Table tops can be changed on the aluminum tables by removing the four mounting screws Each aluminum table comes with a 6 T-slide and hand nut for quick change out Having one aluminum table per table top will drastically decrease the change out time rather than removing and replacing the mounting screws and adjusting the table alignment 9. Backing Clip Kit.... $22.00 Two spring stainless steel clips mounted on the table tops to hold your backing in place while hooping 10. Shirt Board Form..... $110.00 The SBF works only with the 800 series table tops The SBF allows positioning of the neck and shoulders with left, right, and center chest hoop placement for framing sweatshirt and t-shirts The SBF is mounted in between the aluminum support table and the table top using longer screws. The operator should use the corresponding slots in the SBF for the required placement Flip the SBF for left to right hooping 336-548-6598 5 www.pfequipment.com
Cylinder Arms All of our cylinder arms are CNC machined from ¾ Billet Aluminum. The cylinder arms are engraved for precise alignment and dead center placement. We also cut a recessed garment groove in all the cylinder arms to allow the hoop to be seated all the way up on the tubular and double high hoops. 11. 300 Series Cylinder Arms w/ Base.... $434.50 The cylinder arm is designed to allow the easy hooping if socks, sleeves, cap backs, pant legs, and bags Each cylinder arm is machined close to the width of the hoop to allow easy access to the tight and narrow spaces It is mounted on a special support base to allow the hooping of tubular goods such as sleeves and socks 12. 300 Series Cylinder Arms Top Plate... $324.50 This is the same cylinder arm as above but without the base Already have a different size cylinder arm, then there is no need to purchase the base again You must have one base to operate the press Change out is quick and easy using the top hand nut while leaving the base attached to the support arm. 13. 300 Series Cylinder Arm Base..... $110.00 This is the same base include with the cylinder arm above If you have a standard arm then you will need a 10 cylinder arm base A low restriction arm will require the 7 base Head and Table Quick Change Sets 14. 800/900 Series Complete Set......... $572.00 This set includes one 900 series bridgehead, one 800 series table top with backing clips and one aluminum support table 15. 800/900 Series Set....... $445.50 This set includes one 900 series bridgehead, one 800 series table top with backing clips 16. 600/700 Series Complete Set......... $786.50 This set includes one 700 series bridgehead, one 600 series table top with backing clips and one aluminum support table 17. 600/700 Series Set....... $660.00 This set includes one 700 series bridgehead, one 600 series table top with backing clips 336-548-6598 6 www.pfequipment.com
Head and Table Packages All head and table sets will be made to fit customers existing hoops 800/900 Series Heads & Tables and the 300 Series cylinder Arms fits hoop sizes 3.5, 5.5, 7, 7.5, 8.5, 9, 10, 12, 13, 15, 16, 18, 21cm 600/800 Series Heads & Tables fit hoop sizes 24, 30, 290/300, 475/450cm, or any larger hoop Tajima, Barudan, Melco, Brother, Happy, SWF, Toyota, Hoop Tech, Allied Gridlock, Durkee, Etc. 18. Package # 1.. $712.00 1-800/900 Series Head and Table Set *Choice of one size* 19. Package # 2.. $1284.00 2-800/900 Series Head and Table Sets *Choice of two sizes* 20. Package # 3.. $1856.00 3-800/900 Series Head and Table Sets *Choice of three sizes* 21. Package # 4.. $1498.50 1-800/900 Series Head and Table Set *Choice of one size* 22. Package # 5.. $2070.50 2-800/900 Series Head and Table Sets *Choice of two sizes* 23. Package # 6.. $2642.50 3-800/900 Series Head and Table Sets *Choice of three sizes* 24. Package # 7.. $822.00 25. Package # 8.. $1146.50 1-800/900 Series Head and Table Set *Choice of one size* 1-300 Series Cylinder Arm w/base *Choice of one size* ** Additional purchase required if size is not the same as 800/900 table set** 336-548-6598 7 www.pfequipment.com
Head and Table Packages (continued) 26. Package # 9.. $1718.50 2-800/900 Series Head and Table Sets *Choice of two sizes* 1-300 Series Cylinder Arm w/base *Choice of one size* **Additional purchase required if size is not the same as 800/900 table set** 27. Package # 10.. $2290.50 3-800/900 Series Head and Table Sets *Choice of one sizes* 1-300 Series Cylinder Arm w/base*choice of one size* **Additional purchase required if size is not the same as 800/900 table set** 28. Package # 11.. $1933.00 1-800/900 Series Head and Table Set *Choice of one size* 1-300 Series Cylinder Arm w/base *Choice of one size* **Additional purchase required if size is not the same as 800/900 table set** 29. Package # 12.. $2505.00 2-800/900 Series Head and Table Sets *Choice of two sizes* 1-300 Series Cylinder Arm w/base *Choice of one size* **Additional purchase required if size is not the same as 800/900 table set** 30. Package # 13.. $3077.00 3-800/900 Series Head and Table Sets *Choice of three sizes* 1-300 Series Cylinder Arm w/base *Choice of one size* **Additional purchase required if size is not the same as 800/900 table set** 31. Package # 14.. $2829.50 2-800/900 Series Head and Table Sets *Choice of two sizes* 2-300 Series Cylinder Arms w/base *Choice of two sizes* ** Additional purchase required if size is not the same as 800/900 table set** 336-548-6598 8 www.pfequipment.com
Head and Table Packages (continued) 32. Package # 15.. $3401.50 3-800/900 Series Head and Table Sets *Choice of three sizes* 2-300 Series Cylinder Arms w/base *Choice of two sizes* **additional purchase required if size is not the same as 800/900 table set** 33. Package # 16.. $2043.00 2-800/900 Series Head and Table Sets *Choice of two sizes* 2-300 Series Cylinder Arms w/base *Choice of two sizes* **Additional purchase required if size is not the same as 800/900 table set** 34. Package # 17.. $2615.00 3-800/900 Series Head and Table Sets *Choice of three sizes* 2-300Series Cylinder Arms w/base *Choice of two sizes* **Additional purchase required if size is not the same as 800/900 table set** 35. Package # 18.. $2939.50 3-800/900 Series Head and Table Sets *Choice of three sizes* 3-300 Series Cylinder Arms w/ Base *Choice of three sizes* **Additional purchase required if size is not the same as 800/900 table set** 36. Package # 19.. $712.00 1-300/900 Series Head and Cylinder Arm w/base Set *Choice of one size* 37. Package # 20.. $1036.50 1-800/900LR Series Head and Table Set *Choice of one size* 1-300LR Series Cylinder Arm w/base *Choice of one size* **Additional purchase required if size is not the same as 800/900LR table set** 38. Package # 21.. $1608.50 2-800/900LR Series Head and Table Sets *Choice of two sizes* 1-300LR Series Cylinder Arm w/base *Choice of one size* **Additional purchase required if size is not the same as 800/900LR table set** 336-548-6598 9 www.pfequipment.com
Head and Table Packages (continued) 39. Package # 22.. $2180.50 3-800/900LR Series Head and Table Sets *Choice of three sizes* 1-300LR Series Cylinder Arm w/base *Choice of one size* **Additional purchase required if size is not the same as 800/900LR table set** 40. Package # 23.. $1933.00 2-800/900LR Series Head and Table Sets *Choice of two sizes* 2-300LR Series Cylinder Arm w/base *Choice of two sizes* **Additional purchase required if size is not the same as 800/900LR table set** 41. Package # 24.. $2505.00 3-800/900LR Series Head and Table Sets *Choice of three sizes* 2-300LR Series Cylinder Arm w/base *Choice of two sizes* **Additional purchase required if size is not the same as 800/900LR table set** 42. Package # 25.. $2829.50 3-800/900LR Series Head and Table Sets *Choice of three sizes* 3-300LR Series Cylinder Arm w/base *Choice of three sizes* **Additional purchase required if size is not the same as 800/900LR table set** 43. Custom Package.... $????.?? We can custom build a package to suit your needs. Call for Details 336-548-6598 10 www.pfequipment.com
PF101B Frame Press & Parts 44. Frame Press w/ Package..... $2472.50 1-PF101B Frame Press w/standard or Low Restriction Arm *Chose one* 45. Frame Press Only.... $2722.50 1-PF101B Frame Press w/standard or Low Restriction Arm *Chose one* 46. Frame Press Internal Spring.. $8.50 This is the internal return spring inside the hood of the Frame Press If your bridge head does not completely return to the up position, it is possible that the spring is collapsed or broken and in need of replacement To replace the spring remove the 6 screws from the hood (three on each side) Then remove the two screws from the spring cap located at the top of the main frame assembly Remove the broken or collapsed spring checking to make sure there are no broken pieces in the cap or on top of the main shaft in the frame assembly Insert spring in the spring cap and reassemble the cap and hood The spring cap will have to be compressed down in order for the screws to align for reassembly If a clunking sound is heard when the petal is pushed down while hooping then you will need to raise the support arm up one notch at a time until the clunk is no longer heard. This will keep the spring from prematurely breaking or collapsing from over compression 47. Frame Press Wrench... $29.95 Frame Press wrenches made to fit the bridge head jam nut and the hand nuts. This wrench should be used to snug the jam nut to the head, do not over tighten the jam nut or hand nuts with the wrench. This could lead to stripping the threads. 48. Frame Press Hood. $200.00 1-Replacement hood for the PF101B Frame Press w/ mounting screws 49. Frame Press Tray $60.00 1-Replacement tray for the PF101B Frame Press w/ mounting screws 50. Frame Press Foot Petal... $60.00 1-Replacement petal for the PF101B Frame Press w/ pins 51. Frame Press Foot Petal Pad Assembly........ $40.00 1-Replacement petal pad base for the PF101B Frame Press w/ pins and rubber pad 52. Frame Press Hoop Hanger..... $20.00 1-Replacement hoop hanger for the PF101B Frame Press 53. Frame Press Bearing Set.... $50.00 Replacement graphite bearings(2) for the PF101B Frame Press w/ mounting screws 54. Frame Press Cross Over Assembly..... $400.00 Replacement cross over and 1 chrome shaft assembly for the PF101B Frame Press w/ pins 336-548-6598 11 www.pfequipment.com
PF101B Frame Press Parts (continued) 55. Frame Press 6 T-Slide... $75.00 Replacement 6 T-slide for the aluminum support table w/ hand nut and screws 56. Frame Press 8 Notched T-Slide... $75.00 Replacement 8 notched T-slide for the support arms 57. Standard Arm....$186.00 The standard arm is the most widely used arm on the press If you will be using the smaller and larger hoops it is required to have a standard arm on your press for alignment purposes All of or attachments are made to work on the standard arm 58. Low Restriction Arm....$208.00 The low restriction arm is usually only used if requested If you will be using only the smaller hoops the low restriction arm can be used It will NOT work with the larger hoops it is required to have a standard arm on your press to use the larger hoops The low restriction arms have 3 inches more clearance under the cylinder arm for customers that require the clearance. (Ex. hooping bags with small tight pockets) 59. Support Arm Tray......$44.00 The tray can be added to either the standard or low restriction arms It is primarily use for holding shirts while hooping the sleeves 336-548-6598 12 www.pfequipment.com
PF Cap Press Both cap presses are designed to work with the EMS Hoop Tech cap frames or the older standard cap frames. We currently do not offer a model to work with the original 270/290 cap frames or the Barudan cap frames. 60. PF501 Cap Press... $1534.50 This is our full size cap press. Operator height adjustable Two cap feeder trays Hoop hangers Backing / accessory tray 61. PF201 Compact Cap Press.... $895.00 This is our smaller cap press. It offers the same cap stretching ability as our full size cap press. Fixed height Stretcher only 62. Hoop Tech Cap Frames..... $249.95 Green -Fits 270 Tajima, Brother, Melco, Toyota Machines Blue - Fits older Tajima, Brother, Melco, Toyota Machines Not 270 Mauve - Fits SWF Machines Light Blue Fits Happy Machines Bucket Fits 270 & Standard Drivers *This item is not manufactured by P&F, but we offer them as a convenience to our customers, any warranty claims are direct with the manufacturer* 63. Hoop Tech Cap Gauge.. $200.00 This is a custom made gauge to fit our Cap Press to work with the Hoop Tech Cap Frames 336-548-6598 13 www.pfequipment.com
To all our current and new customers: 718 Carlton Rd. Stokesdale, NC 27357 Phone: 336-548-6598 Fax: 336-548-6599 Terms & Conditions All new customer accounts must prepay their first order prior to shipping. Upon the purchase of a framing press and prepayment we will set up your billing account for net 10 day terms. In the event of non-payment or default on this or any future invoice for our equipment, P & F Equipment Co., Inc. shall retain a security interest and title in all equipment and accessories listed on the invoice until all amounts owed to P & F Equipment Co., Inc. are paid in full. Any one or more of the following conditions will constitute a default : (a) Default in the performance of any obligation of the customer to P & F Equipment Co., Inc.; (b) A reasonable belief on the part of P & F Equipment Co., Inc. of the customers insolvency or inability to meet its obligations, however evidenced; (c) The filing of any petition or the commencement of proceedings by or against the customer for relief, or the entry of an order of relief, under bankruptcy or insolvency laws, or any law relating to the relief of debtors, readjustment of indebtedness, reorganization, composition or extension. P & F Equipment Co., Inc. may, at its option, and with out notice, take any legal steps to collect or repossess all equipment and accessories not paid in full. The customer agrees to pay all costs of collections, including but not limited to taxes, freight, restocking fees, and attorney fees if collected by or through an attorney at law. Customer also agrees that P & F Equipment s interest and title shall continue at all times and the equipment can not become the part of any real estate or be sold until all amounts owed to P & F Equipment Co., Inc. are paid in full. Payments are to be made by check, money order or credit card (Visa, Master Card, American Express, Discover or Debit Card) in accordance with our credit card authorization form. Also any discounts given on invoices will not be honored if invoices are not paid by 30 days. Finance charges will be applied to all unpaid invoices over 30 days old at the rate of 18% annually or 1.5% monthly. Due to the custom manufacturing of our packages for individual customers all sales are final and there is no return policy. All custom or non stock orders must be prepaid. The return of defective or damaged merchandise is for exchange only. If you do not agree to these terms & conditions your account can and will be set up for prepayment only. If you have any questions regarding this matter, please feel free to contact me at your convenience. Thank You Tommy Wilson President P&F Equipment Co., Inc. 336-548-6598 14 www.pfequipment.com
718 Carlton Rd. Stokesdale, NC 27357 Phone: 336-548-6598 Fax: 336-548-6599 Credit Card Authorization Form Visa, MasterCard, Debit Card Letter of Authorization Please print and fax completed and signed form to: 336-548-6599 Authorized total amount: in US dollars $ Invoice # / Reference #: I, (please print name) Have reviewed the above referenced sales order and it is correct. I hereby authorize P & F Equipment Co., Inc. to charge the "total amount" specified above to my credit card listed below. I understand that this amount does not include shipping and/or duty charges if applicable and that all shipments will be sent via ground parcel or truck freight, unless other delivery is requested or required. I also understand that all shipping charges not sent freight collect will be added to my above "total amount" or billed separately to my credit card account. A. Name as printed on card: B. Corporate name as printed on card (if applicable): C. Name of bank on card: D. Credit card:...... E. Is this a debit card? Yes... No F. Do you want all future invoices to be paid by this credit card? Yes... No G. Credit card # / / / Exp. date: / / (3 digit or 4 digit security code on back of card) 336-548-6598 15 www.pfequipment.com
H. Credit card billing address: Address City State Zip I. Requested shipping address: Company / Name Address City State Zip J. Phone # listed with Credit Card Company: - - K. Cardholder's signature: X L. Today's date: By signing above, I acknowledge the above charges and treat this fax as a copy of my signature on file. I understand that by signing this form I give authorization to P & F Equipment Co. Inc. to charge my credit card for the above charges and agree to abide by the terms and conditions set fort by P & F Equipment Co., Inc. and the issuing credit card company. Furthermore, I understand and agree that the charges specified above are irrevocable and may not be charged-back at any time in the future and that all sales are final. To complete this transaction, print and fax this completed form to 1-336-548-6599 or mail completed original form to P & F Equipment Co., Inc, 718 Carlton Rd., Stokesdale, NC 27357. All transactions are subject to approval. 336-548-6598 16 www.pfequipment.com