Division 8 3 YEAR WARRANTY BHMA/ANSI A156.6 & A156.16 SPECIFICATION UNISON HARDWARE, INC. www.inoxproducts.com Version: 2015.10
TABLE OF CONTENTS Push and Pull Plates Page 1 Kick Plates, Mop Plates, Armor Plates Page 2 Door Pulls Page 3 Door Stops Page 5 Door Stop / Wall Bumpers Page 6 Door Stop, Floor Mount Page 7 Door Holders Page 8 Manual Flushbolt for Metal Doors Page 9 Manual Flushbolt for Wood Doors Page 10 Automatic Flushbolt for Metal Doors Page 11 Automatic Flushbolts for Wood Doors Page 12 Dust Proof Strike Page 13 Coordinator Page 14 Coordinator Accessories Page 15 Door Guards Page 16 Door Viewer Page 17 Commercial Roller Latches Page 18 Magnetic Door Holders Page 19 Comparison Chart Page 20 Disclaimer: All information in this catalog has been deemed accurate as of the date of printing. We are continuously improving and expanding our line in an effort to offer our clients the finest quality products and services; therefore, Unison Hardware, Inc., reserves the right to alter this information or correct printing errors at any time. C 2015 Unison Hardware, Inc. All Rights Reserved.
Version: 2015.10 ARCHITECTURAL TRIM Push and Pull Plates PPN4016R and PPN4016 PPN4016R PPN4016. PPN4016-4 x 16, Push Plates (ANSI: J301). PPN4016R - 4 x 16 Plate with Round Pulls (ANSI: J405) Pull Dia. ¾, Overall 6-3/4, CTC 6, Projection 2-1/8. All plate goods are 16 gauge (.050) thick. Material: Stainless Steel. Plates individually wrapped with mounting screws. Pull plates and handles have mounting screws for 1-3/4" thick door Plate goods shall be by INOX model number PPN and made from stainless steel. All plates to be a minimum of 16 gauge (.050) and beveled on four sides. All plates to be provided with stainless steel phillips sheet metal screws plated to match finish. Each plate shall be individually wrapped with mounting screws. Stocking: US32D (630) Satin Stainless Steel US32 (629) Bright Stainless Steel US3 (724) Bright Brass PVD US4 (735) Satin Brass PVD US10 (740) Satin Bronze PVD US10B (742) Dark/Oil Rubbed Bronze PVD. ANSI A156.6 - J301 Push Plate and J405 Pull Plates. ANSI A117.1 and ADA for barrier-free accessibility. C-UBC - California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA-101 National Fire Protection Assoc. - Life Safety 3 Year 01
ARCHITECTURAL TRIM Version: 2015.10 Kick Plates, Mop Plates, Armor Plates KPN Kick Armor Mop Stretcher Armor Plate, Kick Plate, Mop Plate & Material. All plates are 16 gauge (.050) thick. Plates individually wrapped and packed with stainless steel sheet metal screws plated to match finish KPN35 Series Material: 304 Grade Stainless Steel. 4 edge bevel. Countersunk holes KPN35-0634 Mop Plate 6" x 34" KPN35-0834 Kick Plate 8" x 34" KPN35-1034 Kick Plate 10" x 34" KPN35-1046 Kick Plate 10" x 46" KPN35-1234 Kick Plate 12" x 34" KPN35-3634 Armor Plate 36" x 34" Plate goods shall be by INOX model number KPN and made from plate brass or stainless steel. All plates to be a minimum of 16 gauge (.050) All Plates to be provided with stainless steel phillips sheet metal screws plated to match finish. Each plate shall be individually wrapped with mounting screws. Stocking: US32D (630) Satin Stainless Steel KPN Series Material: 400 Grade Stainless Steel (No Nickel). No bevel or countersunk holes KPN0634 Mop Plate 6" x 34" KPN0834 Kick Plate 8" x 34" KPN1034 Kick Plate 10" x 34" KPN1046 Kick Plate 10" x 46" KPN1234 Kick Plate 12" x 34" KPN3634 Armor Plate 36" x 34" Other sizes available upon request.. ANSI 156.6 - J101, J102, J103 Metal. ANSI - J102 Metal. ANSI A117.1 and ADA for Barrier-Free Accessibility. C-UBC California Amended Uniform Builders Code. NFPA-80 National Fire Protection Association. NFPA-101 National Fire Protection-Life Safety 3 Year 02
Version: 2015.10 ARCHITECTURAL TRIM Door Pulls PHIX PHIX31 PHIX32 PHIX33/PHIX34 PHIX35 PHIX36. PHIX31: U-Shape Pull (ANSI: J401). PHIX32: D-Shape Pull (ANSI: J402). PHIX33: T-Shape Pull (ANSI: J406*). PHIX34: T-Shape Pull offset 45 Degree. PHIX35: C-Shape Pull (ANSI: J402). PHIX36: V-Shape Pull (ANSI: J402) * Set option combined with Push Plate J301. Material: Stainless Steel. All pulls have finger clearance under grip portion that exceeds minimum ANSI requirement of 1-1/2 (38mm).. Bolt-through, Back-to-Back or On-Rose mounting options available using universal adaptor with M6 set screws.. Standard fixing suitable for door thickness from 1/2 up to 2. Thick door kits are available.. Clear nylon washer and rubber inserts included for glass door applications. Stocking: US32D (630) Satin Stainless Steel US32 (629) Bright Stainless Steel US3 (724) Bright Brass PVD Coated US10B (695) Oil Rubbed Bronze Painted Door pulls shall be INOX model number PHIX and made from stainless steel. All pulls shall have minimum 1-1/2 finger clearance under grip portion. All pulls shall be provided with universal adaptor and M6 set screws. Clear nylon washer and rubber inserts shall be included for glass door application. Mounting Option: BT: Bolt-Through Fixing On Rose: PHIX31 Dia.¾ U-Shape Pull Only BTB: Back-to-Back Fixing. ANSI A156.6 J401, J402, J406. ANSI A117.1 ADA for barrier free accessibility. C-UBC - California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA-101 National Fire Protection. - Life Safety 3 Year 03
ARCHITECTURAL TRIM Version: 2015.10 Door Pulls PHIX Dimensions U-Shape Pull T-Shape Pull CTC Length Height Item Number Height CTC Length Height Degree Item Number Tube Diameter 3/4 Tube Diameter 1-1/4 6" 6-3/4" 2-3/4" PHIX31106 10" 18" 3 90 PHIX33310 Tube Diameter 8" 8-3/4" 2-3/4" PHIX31108 12" 20" 3 90 PHIX33312 CTC 10" 10-3/4" 2-3/4" PHIX31110 18" 26 3 90 PHIX33318 12" 12-3/4" 2-3/4" PHIX31112 Tube Diameter 1 10" 11" 3 PHIX31210 Tube Diameter CTC Length 10" 18 3 45 PHIX34310 12" 20" 3 45 PHIX34312 18" 26" 3 45 PHIX34318 12" 13" 3 PHIX31212 48 56 3 90 PHIX33348 Height Tube Diameter 1-1/4 12" 13-1/4" 3-1/4 PHIX31312 60 68 3 90 PHIX33360 18" 19-1/4" 3-1/4 PHIX31318 D-Shape Pull C-Shape Pull Height P CTC Length Height Projection Item Number Projection CTC Tube Diameter Tube Diameter 1 10" 11" 3-1/4 4-1/2 PHIX32210 12" 13" 3-1/4 4-1/2 PHIX32212 Tube Diameter 1-1/4 Tube Diameter CTC 12" 13-1/4" 3-1/2 4-3/4 PHIX32312 18" 19-1/4" 3-1/2 4-3/4 PHIX32318 V-Shape Pull Height CTC Length Height Projection Item Number Tube Diameter 1-1/4 12" 13-1/4" 3-3/8 8 PHIX35312 CTC Tube Diameter P Height CTC Length Height Projection Item Number Tube Diameter 1-1/4 12" 13-1/4" 3-1/4 6 PHIX36312 04
Version: 2015.10 AUXILIARY HARDWARE Door Stops DS436 and DS438 DS436 Low Dome Stop DS438 High Dome Stop. DS436-1/4" Rise x 1 Low Dome Stop. DS438-1/2" Rise x 1-1/4" High Dome Stop. Material: cast brass or stainless steel. DS436BR - ANSI L12141. DS438BR - ANSI L12161. DS436SS - ANSI L52141. DS438SS - ANSI L52161. Stops Individually wrapped with mounting screws Stops and holders shall be INOX model number D5436 or D5438. All stops to be provided with steel phillips sheet metal screws plated to match finish. Each stop shall be individually wrapped with mounting screws. Stocking: US26D (626) Satin Chrome. US32D (630) Satin Stainless Steel. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome. ANSI 156.16 - L12141, L12161, L52141, L52161. C-UBC - California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA-101 National Fire Protection. - Life Safety 3 Year 05
AUXILIARY HARDWARE Version: 2015.10 Door Stop / Wall Bumpers DS401 and DS406 DS401 Concave Wall Stop DS406 Convex Wall Stop. DS401 - Concave Door Stops, Wall Mount. DS406 - Convex Door Stops, Wall Mount. Material: Cast Brass or Wrought Stainless Steel. DS401BR - ANSI L12101. DS406BR - ANSI L52101. DS401SS - ANSI L12251. DS406SS - ANSI L52251. Stops Individually wrapped with mounting screws Stops shall be by INOX model number DS401 or DS406 and made of pressure cast zinc. All stops to be provided with steel phillips sheet metal screws plated to match finish. Each stop shall be individually wrapped with mounting screws. Stocking: US26D (626) Satin Chrome. US32D (630) Satin Stainless Steel. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome. ANSI 156.16 - L12101, L12251, L52101, L52251. C-UBC - California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA-101 National Fire Protection - Life Safety 3 Year 06
Version: 2015.10 AUXILIARY HARDWARE Door Stop, Floor Mount DS444 DS444 Floor Mount Stop. DS444 - ANSI L12131-3-1/8" High Door Stops, Floor Mount. Material: Stainless Steel. Stops Individually wrapped with mounting screws Stops shall be by INOX model number DS444 and made from solid cast brass. All stops to be provided with steel phillips sheet metal screws plated to match finish. Each stop shall be individually wrapped with mounting screws. Stocking: US26D (626) Satin Chrome. US32D (630) Satin Stainless Steel. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome. A156.16 - L12131. Fed Spec # 1328E. C-UBC - California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA-101 National Fire Protection. - Life Safety 3 Year 07
AUXILIARY HARDWARE Version: 2015.10 Door Holders DH235 DH235 Drop Down Door Holder. ANSI L11382. DH235-5" Cast Brass Holder. Stops Individually wrapped with mounting screws. Polybagged 4 sheet metal screws Door holders shall be by INOX model number DH235, 5" cast brass. All holders to be provided with steel phillips sheet metal screws plated to match finish. Each door holder shall be individually wrapped with mounting screws. Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. ANSI A156.16 - L11382. NFPA 80 - National Fire Protection Association. NFPA-101 National Fire Protection. - Life Safety 3 Year 08
Version: 2015.10 AUXILIARY HARDWARE Manual Flushbolt for Metal Doors FB197M FB197M. FB197M - Forged Brass - ANSI: L14251. Non-Handed. 5/8" Throw with 7/8" Vertical Adjustment. 12" Rod to Fit Standard ANSI Preparation. Spring Loaded Lever to Project or Retract Bolt. Forged Brass Construction. Bolt Housing Screws #8 x 32 x 1/2" MS #8 x 1" SM. Strike Screws #8 x 32 x 1/2" MS #8 x 1" SM. Bolt Guide Screws #8 x 32 x 1/2" MS #8 x 1" SM. Listed up to 3 hours on Hollow Metal and Steel-Covered Composite Doors up to 8 feet Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome Manual Flushbolts shall be by INOX model number FB197M and made from forged brass. Flush bolts shall be provided with 1/2" diameter brass bolts and project 5/8" from the top or bottom edge of door with 7/8" vertical adjustment. Flush bolts shall have spring loaded lever to project or retract the bolts.. FED.SPEC. - 1049. ANSI A156.16 - L14251. NFPA80 - National Fire Protection Association 3 Year 09
AUXILIARY HARDWARE Version: 2015.10 Manual Flushbolt for Wood Doors FB196W FB196W. FB196W - Forged Brass - ANSI: L14251. Non-Handed. 5/8" Throw with 7/8" Vertical Adjustment. Spring Loaded Lever to Project or Retract Bolt. Forged Brass Construction. Bolt Housing Screws #8 x 32 x 1/2" MS #8 x 1" SM. Strike Screws #8 x 32 x 1/2" MS #8 x 1" SM. Bolt Guide Screws #8 x 32 x 1/2" MS #8 x 1" SM. Listed up to 1-1/2 hours on Wood and Composite Doors up to 8 feet. Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome Manual Flushbolts shall be by INOX model number FB196W and made from forged brass. Flush bolts shall be provided with 1/2" diameter brass bolts and project 5/8" from the top or bottom edge of door with 7/8" vertical adjustment. Flush bolts shall have spring loaded lever to project or retract the bolts.. FED.SPEC. - 1049. ANSI A156.16 - L14261. NFPA80 - National Fire Protection Association 3 Year 10
Version: 2015.10 AUXILIARY HARDWARE Automatic Flushbolts for Metal Doors FBA292M FBA292M. FBA292M: Fully Automatic, Non-Handed. Automatic 3/4" throw with 1" Vertical Adjustment. 12" Rod to Fit Standard ANSI Preparation. Spring Override in Case of Misalignment. Steel Body and Stainless Steel Components. Spring Loaded Lever to Project or Retract Bolt. Bolt Housing Screws #8 x 32 x 3/4" MS #8 x 1" SM. Strike Screws #8 x 32 x 3/4" MS #8 x 1" SM. Bolt Guide Screws #8 x 32 x 3/4" MS #8 x 1" SM. Listed up to 3 hours on Hollow Metal and Steel-Covered Composite Doors up to 8 feet Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome Automatic Flushbolts for metal doors shall be INOX model number FBA292M and body shall be made of steel and stainless steel components. Flush bolts shall be automatically retracting when active door is opened and project into the frame header or floor when the door is closed. Bolts shall project 3/4" from the top or bottom edge of door with 1" adjustment.. ANSI - A156.3 Type 25. ANSIA117.1 and ADA for barrier-free accessibility. C-UBC-California Amended Uniform Builders Code. NFPA80 - National Fire Protection Association. NFPA101 - National Fire Protection -Life Safety 3 Year 11
AUXILIARY HARDWARE Version: 2015.10 Automatic Flushbolts for Wood Doors FBA291W FBA291W. FBA291W: Fully Automatic, Non-Handed. Automatic 3/4" Throw and 3/4" Vertical Adjustment. Spring Override in Case of Misalignment. Steel Body and Stainless Steel Components. Bolt Housing Screws #8 x 3/4" SM #8-32 x 1/4" MS. Strike Screws #8 x 3/4" SM. Bolt Guide Screws #10 x 7/8" SM. Rub Plate Screws #8 x 3/4" SM. Listed up to 1-1/2 hours on Composite Wood Doors up to 8 feet Automatic Flushbolts for composite wood shall be INOX model number FBA291W and body shall be made of steel and stainless steel components. Flushbolt shall be automatically retracting when active door is opened and projected into the frame header or floor when the door is closed. Bolts shall project 3/4" from the top or bottom edge of the door with 3/4" adjustment. Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome. ANSI - A156.3 Type 25. Conforms to UL 10C and UBC 7-2. ANSI A117.1 and ADA for barrier-free accessibility. C-UBC-California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA 101 - National Fire Protection. - Life Safety 3 Year 12
Version: 2015.10 AUXILIARY HARDWARE Dust Proof Strike DPS280 DPS280 Dust Proof Strike. DPS280: Dust Proof Strike - ANSI L24011, L24021. Material: Extruded Brass. Spring loaded 3/4" plunger. Both floor and threshold installation. Face plate 3" x 1-1/2". Body diameter 15/16". Over all depth 2-1/4". Strike Screws #12 x 1-1/2". Plastic anchors. UL fire rated for use up to 3 hours Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome Dust proof strike shall be INOX model number DPS280 and made from extruded brass. All dust proof strikes shall be provided with 3/4" diameter spring loaded plunger that returns to the floor level when the flush bolt is retracted.. ANSI - A156.16 - L24011, L24021. Conforms to UL 10C and UBC 7-2. ANSI A117.1 and ADA for Barrier-Free accessibility. C-UBC-California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA 101- National Fire Protection - Life Safety 3 Year 13
AUXILIARY HARDWARE Version: 2015.10 Coordinator COR60 / COR72 / COR84 COR72 - Coordinator for 72" Opening. Extruded aluminum housing. Adjustable tension override spring. Filler bar provided allowing an even, unbroken line the full width of the opening. Mounting screws #12 x 24 x 1-1/4" MS. For use on fire rated openings UNI # Opening Width Coordinator Size Filler Size COR 60 5' 42" 18" COR 72 6' 52" 20" COR 84 7' 52" 32" Coordinator shall be by INOX model number COR flat bar type and made from extruded aluminum. Coordinator shall control the closing sequence so the active door is held open until the inactive door closes, triggering the release of the active door allowing for proper latching. Optional COR18, 20 or 32 filler bar shall be provided allowing an even, unbroken line the full width of the opening. Optional COR-MB434M or COR-MB414N shall be ordered for each piece of hardware to be mounted over the bar coordinator. Options. COR18FL - 18" Filler Bar. COR20FL - 20" Filler Bar. COR32FL - 32" Filler Bar Stocking: AL-US28 (689) Aluminum Painted, DU-US20 (690) Duro/Dark Bronze Painted. ANSI - A156.3 Type 21A. Conforms to UL 10C and UBC 7-2. ANSI A117.1 and ADA for Barrier-Free accessibility. C-UBC-California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA 101- National Fire Protection - Life Safety 3 Year 14
Version: 2015.10 AUXILIARY HARDWARE Coordinator Accessories COR-MB434M Mounting Bracket Jamb Depth 4-3/4" Min. 5/8" Stop Height For Stop Width 7/8" to 2-1/4" COR-MB414N Mounting Bracket Jamb Depth 4-1/4" Min. 5/8" Stop Height For Stop over 2-1/4" COR-CB100 Carry Bar is mounted on the inactive door. When inactive door opens the carry bar opens the active door until it engages the coordinator hold open mechanism. Not used with automatic flush bolts. 15
AUXILIARY HARDWARE Version: 2015.10 Door Guards DG128 / DG128BR DG128/DG128BR Safety Lock Door Guard. ANSI: L93042 - DG128 - Heavy pressure cast alloy. ANSI: L13042 - DG128BR - Solid forged brass. Positive projection lock ball not allowing forced entry. Swing bar folds out of plate when not used. Maximum 4" door opening when engaged. Cannot be disengaged unless door is fully closed Options Door Guards shall be by INOX model number DG128 and made from cast alloy or solid cast brass. Door guards to be provided with projected lock ball and flip swing bar not allowing forced entry when engaged. Swing bar shall fold out of place when not in use. Door guard shall be installed so a maximum 4 inch door opening when engaged and will not disengage until door is fully closed. Each door guard to be individually polybagged with stainless steel screws.. DG-EDP128 Door edge protector with adhesive. DG-SHM128 Door guard shim Finish Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome 3 Year. ANSI A156.16 L13042, L93042. C-UBC-California Uniform Builders Code. NFPA 80 - National Fire Protection Association. NFPA 101 - National Fire Protection. -Life Safety 16
Version: 2015.10 AUXILIARY HARDWARE Door Viewer DV33220F DV33200F Door Viewer 9/16" (14mm) Bore Diameter Inside Flange 11/16". 200 Degrees Viewing Area. Polished Glass Lense. ANSI L23221. UL10c Fire Rated. Material: Solid Brass. DV33200F can be used for 11/16" - 1-7/8" thick "Shake" type door Viewer shall be by INOX model number DV33200F and made from solid cast brass with highly polished optic lens for extra wide viewing angle. All viewers to be provided for installation in 1-3/4" wood or metal doors. Each viewer to be individually packed. Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome. US15 (619) Satin Nickel. ANSI A156.16 - L21371, L23221. Conforms to UL10c and UBC7-2. C-UBC-California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association - 1999. NFPA 101 - National Fire Protection -Life Safety 3 Year 17
AUXILIARY HARDWARE Version: 2015.10 Commercial Roller Latches RL300 / RL320 RL300 Dimensions: Body: 1" Wide x 3-3/8" Long x 1-5/8" Deep Strike: 1-11/16" Wide x 2-3/16" Long x 5/32" Thick RL320 Dimensions: Body: 1-1/8" Wide x 2-1/4" Long x 1-3/4" Deep Strike: 1-1/8" Wide x 2-3/4" Long x 1/16" Thick RL300. Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed. The projection of the roller is easily adjusted using adjusting screws on the face of the unit. Maximum projection of the roller is 3/8" allowing for variance in the door clearance. Nylon Roller Standard. Forged Brass Construction. Meets ANSI/BHMAA156.16, E19091 RL320. Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed. The projection of the roller is easily adjusted by turning knurled knob on back of latch. Maximum projection of the roller is 1/2" allowing for variance in the door clearance. Fits heavy-duty cylindrical lock cutout. Nylon Roller Standard. Brass or Stainless Steel Construction. Meets ANSI/BHMAA156.16, E19101 3 Year Specification Roller Latch shall be by INOX Model number RL300 or RL320. All roller latches shall have forged brass construction with Nylon Roller. The projection of the roller shall be easily adjusted. Stocking: US26D (626) Satin Chrome. US3 (605) Bright Brass. US4 (606) Satin Brass. US10B (613) Oil Rubbed Bronze. US26 (625) Bright Chrome. US15 (619) Satin Nickel. ANSI A156.16 E19091. C-UBC-California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association - 1999. NFPA 101 - National Fire Protection - Life Safety 18
Version: 2015.10 AUXILIARY HARDWARE Magnetic Door Holders DHM2100 DHM2100 Recessed Wall Mount Optional Extensions DHM2100 DHM-EX50 1/2" (20050) DHM-EX75 3/4" (20075). DHM2100: Magnetic Door Holder - ANSI: C00011. Tri-Voltage - can be wired 12V DC, 24V AC/DC or 120V AC.. 30-45 pound holding power. Units can be used on fire/smoke barrier doors held open until released by a remote switching device.. Units can also be used to hold a door open.. 1 Extension provided, 1/2 and 3/4 Optional Extension. Easy wire installation with quick insert connector. Armature has 360 o Mobility. Armature is thru-bolted to the door for security for standard 1-3/4" Door Thickness. Thick door kits available by special order.. No Plastic Parts Magnetic Door Holders shall be INOX model number DHM2100. All magnetic door holders shall have tri-voltage with 30-45 pound holding power used for fire/smoke barrier doors held open until released by a remote switching device. Armature shall have 360 o mobility with thru-bolts to the door for security. All Magnetic door holders shall have no plastic parts. Stocking: AL: US28(689) Aluminum Painted US32D (630) Satin Stainless Steel 3 Year. Meeting ANSI/BHMA 156.15 C00011. UL Listed for fire/smoke barrier doors. C-UBC-California Amended Uniform Builders Code. NFPA 80 - National Fire Protection Association - 1999. NFPA 101 - National Fire Protection - Life Safety 19
AUXILIARY HARDWARE Version: 2015.10 INOX Trim and Auxiliary Hardware CROSS REFERENCES Product Description INOX Trimco Ives Hager Cal-Royal Rockwood 4" x 16" Push Plate PPN4016 1001-3 8200 30S PSPL4016-4" x 16" Push Plate with Round Pull PPN4016R 1017-3 8302-6 31E x 3E - - Kick Plate Mop Plate, Armor Plate KNP K0050 8400 190S KICK - Door Pulls U-Shape, 3/4" Tube Diameter PHIX311 1194 8102-0 3E NA NA Door Pulls U-Shape, 1" Tube Diameter PHIX312 1195 8103-0 P4E NA RM3131 Door Pulls U-Shape, 1-1/4" Tube Diameter PHIX313 195-3J - 10L NA RM2132 Door Pulls D-Shape, 1" Tube Diameter PHIX322 1191-3 8190-0 12G NA RM3040 Door Pulls D-Shape, 1-1/4" Tube Diameter PHIX323 1191-4J - NA NA RM3050 Door Pulls T-Shape, 1-1/4" Tube Diameter PHIX333 1171 - NA NA RM3216 Door Pulls T-Shape, 45 offset, 1-1/4" Tube Diameter PHIX343 1172 - NA NA - Door Pulls C-Shape, 1-1/4" Tube Diameter PHIX353 1748-1 - NA NA - Door Pulls V-Shape, 1-1/4" Tube Diameter PHIX363 7170 - NA NA - Product Description INOX Trimco Ives Hager Cal-Royal DCI Low Dome Stop DS436 1211 FS436 241F DSLP4 3310 High Dome Stop DS438 1212 FS438 243F DSHP18 3320 Convex Wall Stop DS401 1270CS FS401 232W CONWB42 3210 Concave Wall Stop DS406 1270WVX FS406 236W WB26 3211 Floor Mounted Stops DS444 1201-5 FS444 267F GS119 3360 Drop Down Door Holder DH235 1220-5 FS452-5 271D SBDH5 3115 Manual Flush Bolt for Wood Doors - UL FB196W 3913 FB358 283D WFUL634 790 Manual Flush Bolt for Metal Doors - UL FB197M 3917 FB457 282D ULFB634 780F Automatic Flush Bolt for Wood Doors FB291W 3815 FB51P 291D AUTOFLM-1 942 Automatic Flush Bolt for Metal Doors FB292M 3810 FB31P 292D AUTOFLW-22 842 Dust Proof Strike DPS280 3911 DP2 280X DPSTRK1 DPS82 42" Coordinator and 18" Filler Bar for 60" COR60 3094 COR42 297D - N-660 52" Coordinator and 20" Filler Bar for 72" COR72 3094 COR52 297D DORCO-1 672 52" Coordinator and 32" Filler Bar for 84" COR84 3094 COR52 297D DORCO-1 684 18" Filler Bar COR18 3094-2 FL20 297F FB-1858-20" Filler Bar COR20 3094-2 FL32 297F FB-2058-32" Filler Bar COR32 3094-3 FL44 297F FB-3258 - Mounting Bracket 4-3/4" Minimum Jamb COR-MB434 3095 MB2 297M MB-4250 AB Mounting Bracket 4-1/4" Minimum Jamb COR-MB414 3096 MB1 297N MB-4750 C Carry bar COR-CB100 3090 CB1 297C CBCO-1 CB Door Guard - Cast Alloy DGIX01 - - - BBDHG88 - Door Guard - Cast Brass DGIX01BR 4016 482 1412 SBDG00 - UL Fire Rated Door Viewer with 200 degree viewing DV33200F 976U 698 1756 ULDV200-20
Please visit our website http://www.inoxproducts.com for more technical and new product information.
Unison Hardware, Inc. 6 Wayne Court, Sacramento, CA 95829, USA Tel: +1.916.388.1888 Fax: +1.916.388.8322 Email: info@unisonhardware.com http://www.inoxproducts.com