SPRING/SUMMER FLYER 2010 Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown. ABSOLUTE Coolant Proof Calipers SERIES 500 with Dust/Water Protection Conforming to IP67 Level Can be used in workshop conditions exposed to coolant, water, dust or oil Easy to use - no need to wipe or clean the scale Incorporates absolute measurement system Automatic power-on/off Data output function With thumb roller All calibrations are performed to 17025 Standards Coolant Proof Caliper - Inch/Metric Order No. Resolution MSLP SPECIAL 0-6 /0-150mm 500-752-10*.0005 /0.01mm $222.00 $199.80 $35.00 0-8 /0-200mm 500-753-10*.0005 /0.01mm $316.00 $284.40 $46.00 0-8 /0-200mm 500-763-10.0005 /0.01mm $367.00 $330.30 $46.00 0-12 /0-300mm 500-754-10*.0005 /0.01mm $432.00 $388.80 $58.00 *without SPC data output Coolant Proof Micrometers SERIES 293 with Dust/Water Protection Conforming to IP65 Level IP65 protection level Water-resistant SPC connection cable is available Auto power ON/OFF function With a standard bar except for 0-25mm/0-1" Coolant Proof Micrometer - Inch/Metric SPC Cable w/data switch MSLP SPECIAL 05CZA662: SPC cable (1m/40 ) $100.00 $ 90.00 05CZA663: SPC cable (2m/80 ) $147.80 $133.02 Resolution Order No. MSLP SPECIAL 0-1" / 0-25.4mm.00005 / 0.001mm 293-330 $250.00 $225.00 $35.00 0-1" / 0-25.4mm.00005 / 0.001mm 293-340* $215.00 $193.50 $35.00 1" - 2 / 25.4-50.8mm.00005 / 0.001mm 293-331 $324.00 $291.60 $35.00 1" - 2 / 25.4-50.8mm.00005 / 0.001mm 293-341* $276.00 248.40 $35.00 2" - 3" / 50.8-76.2mm.00005 / 0.001mm 293-332 $383.00 $344.70 $35.00 2" - 3" / 50.8-76.2mm.00005 / 0.001mm 293-342* $336.00 $302.40 $35.00 3" - 4" / 76.2-101.6mm.00005 / 0.001mm 293-333 $412.00 $370.80 $35.00 3" - 4" / 76.2-101.6mm.00005 / 0.001mm 293-343* $384.00 $345.60 $35.00 Bore Gauge - Inch Measuring Bore Gauge SERIES 526 for Extra Small Holes Order No. With 2923SB-10 Graduation.0001" SPC Cable w/data switch MSLP SPECIAL 05CZA624: SPC cable (1m/40 ) $108.00 $97.20 05CZA625: SPC cable (2m/80 ) $115.00 $103.50 To measure diameters of small holes Radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is shown on the dial indicator dia..375 Complete with 8 anvils, 1 needle gauge protector Probe depth 2.4 See more bore gauges on Page 5 MSLP SPECIAL Setting and dial Rings solds separately.4 -.7 526-123 $489.00 $440.10 $81.00 Optional Stand Bore gauge stand for efficient measurement of multiple small holes. Order No. 215-120M MSLP $1,200.00 SPECIAL: $1,080.00 *without SPC data output
Outside Micrometers SERIES 103 Hammertone, baked-enamel-finished frame Ratchet Stop or Friction Thimble for exact repetitive readings With a standard bar (except for 0-1"/0-25mm models) Gauge Block Set SERIES 516 Inch Rectangular Steel High carbon, high chrome steel with a high degree of hardness A certificate of accuracy, traceable to NIST is included 81 pieces - Grade 0 Order No. 516-902-26 MSLP $2,097.00 SPECIAL $1,887.30 $299.00 Outside Micrometer Set SERIES 103 - Without Standards Satin-chrome finished frame Ratchet Stop type No standards Complete with storage case Dial Calipers SERIES 505 With Titanium Coating Ultra smooth sliding movement and high shock protection Titanium Nitride (TiN) coating is applied to the sliding surface to increase wear resistance (except 0-12"/0-300mm models) Can measure OD, ID, depth, and steps Clamping screw atop the slider Spring/Summer Flyer Micrometer Set - Inch TiN coating for excellent wear resistance Outside Micrometer - Inch or Metric Order No. Graduation Thimble MSLP SPECIAL 0-25mm 103-125 0.01mm Friction $105.00 $94.50 $35.00 0-25mm 103-137 0.01mm Ratchet $105.00 $94.50 $35.00 25-50mm 103-138 0.01mm Ratchet $116.00 $104.40 $35.00 0-1" 103-127.001" Friction $105.00 $ 94.50 $35.00 0-1" 103-135.0001" Friction $116.00 $104.40 $35.00 Inside Micrometer SERIES 141 Interchangeable Rod Type Interchangeable rods Each rod is marked with its measuring range The sizes of interchangeable rods can be adjusted with spacing collars Both micrometer head and furnished rods are satinchrome finished throughout Inside Micrometer - Inch Order No. Order No. Graduation MSLP SPECIAL Travel of micrometer head Remarks MSLP SPECIAL 2" - 12" 141-233.5" with 5 rods $230.00 $207.00 $104.00 0-3" (3 pcs./set) 103-942.0001" $189.00 $170.10 $92.00 Vernier Calipers SERIES 531 With Thumb Clamp Inch/Metric dual scale Can measure OD, ID, depth, and steps The slider moves only when the spindle loaded thumb clamp is depressed High accuracy models Dial Calipers- Inch Order No. Graduation Per Rev. MSLP SPECIAL 0-6 505-717.001.2" $137.00 $123.30 $35.00 0-6" 505-712*.001".1" $265.00 $238.50 $35.00 0-8 505-719.001.2" $187.00 $168.30 $46.00 0-12 505-720.001.2" $307.00 $276.30 $58.00 *Carbide Jaws for OD & ID Measurement Vernier Calipers - Inch/Metric Scales 0-150mm / 0-6" 0-200mm / 0-8 Order No. Thumb clamp Lower Scale Graduation Upper Scale MSLP SPECIAL 531-128 0.02mm.001 $105.00 $94.50 $35.00 531-129 0.02mm.001 $119.00 $107.10 $46.00 22
Spring/Summer Flyer Back Plunger Type Dial Indicators SERIES 1 Suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in small spaces where the graduations of standard dial gauges are difficult to see Inch - ANSI Standard (3.8 Stem dia.) Total Graduation Order No. per Rev. Dial MSLP SPECIAL 1156.1.001 1156.1 0-100 $131.00 $117.90 $35.00.1.001 1157.1 0-50-0 $131.00 $117.90 $35.00 Dial Indicator SERIES 2 Metric Standard Type With limit pins and an outer frame clamp The outer clamp and lifting lever (optional) can be attached to either the right or left side Water and oil resistant, scratch resistant High-strength quench-hardened stainless spindle Carbide contact point is used Comparator Stand Stable, cast-iron base and an upright column with a mounting bracket with fine adjustment. The grid type anvil prevents the workpiece from sticking to it. Order No. 215-407 MSLP $513.00 SPECIAL: $262.22 Dial Gauge Stand 3/8 Stem hole with flat anvil (101461) for use with dial or digimatic gauges Order No. 7004 MSLP $367.00 SPECIAL: $330.30 7004 with ø58mm flat anvil SAVE 49% Series 2 Dial Indicators - Metric Graduation / Rev Dial Order No. (Lug back) 0.01mm 10mm 1mm 0-100 2046S Stem Dia. MSLP SPECIAL ø8mm /JIS ABSOLUTE Digimatic Indicators ID-S SERIES 543 Economical Design With Absolute Encoder The ID-S indicates the absolute position of the spindle from the origin point at power-on Measurement error due to spindle overspeed is eliminated with the ABSOLUTE Encoder ANSI/AGD type (3/8 dia. stem) SPC data output SPC Cable MSLP SPECIAL 905338: SPC cable (1m/40 ) $46.30 $41.67 905409: SPC cable (2m/80 ) $51.00 $45.90 $102.00 $91.80 $35.00 543-693B Magnetic Flexi-Stand Applicable holding stem dia. ø6mm, ø8mm, ø9.53mm (3/8 ) for dial test indicators Order No. 7012-10 MSLP $188.00 SPECIAL: $169.20 ABSOLUTE Digimatic Indicator ID-U SERIES 575 with Slim and Simple Design Slim, economical type digital indicator Large LCD and simple key operation Compact design and long battery life ABSOLUTE technology always displays the spindle "Absolute Position" from the origin at power-on. Unlimited response speed eliminates over-speed errors Flat back type only ANSI/AGD type (3/8" dia. stem) SPC data output SPC Cable MSLP SPECIAL 905338: SPC cable (1m/40 ) $46.30 $41.67 905409: SPC cable (2m/80 ) $51.00 $45.90 ID-S Digimatic Indicators - Inch/Metric Resolution Order No. Remarks MSLP SPECIAL.00005 /0.001mm 543-692 Lug back.5 / $327.00 $294.30 $35.00.0001 /0.001mm 543-693B Flat back 12.7mm $327.00 $294.30 $35.00 ID-U Digimatic Indicator - Inch/Metric Resolution Order No. MSLP SPECIAL.0005 /0.01mm 1 / 25.4mm 575-123 $232.00 $208.80 $35.00 3 3
Spring/Summer Flyer Dial Test Indicators SERIES 513 Horizontal Type No-clutch structure for automatic reversal of measuring direction Flat crystal face is glare-free with scratch-resistant coating Carbide contact point 513-412 Steel Rules Series 182 Wide Rigid Rules Clear graduations on satin-chrome finish Stainless tempered Thickness 3/64 513-406T 513-405E Test Indicators Order No. Graduation Remarks Dial Remarks MSLP SPECIAL 0.2mm 513-405E 0.002mm Basic Set 0-100-0 $187.00 $168.30 $35.00 Pitch Gauges Thread pitch size is stamped on each gauge Metric, Unified, and Whitworth screw pitch gauges Pitch Gauges Antimagnetic, jeweled 0.2mm 513-405T 0.002mm Full Set 0-100-0 $218.00 $196.20 $35.00 03, 0.7mm 513-406T.0005, 0.01mm Full Set 0-15-0 0-35-0 $194.00 $174.60 $35.00.03 513-412.0005 Basic Set 0-15-0 Antimagnetic, $200.00 $180.00 $35.00.03 513-412T.0005 Full Set 0-15-0 jeweled, long point $227.00 $204.30 $35.00 Order No. No. leaves Type MSLP SPECIAL Wide Rigid Steel Rules Order No. Graduations Width MSLP SPECIAL 6 (4R) 182-101 1/8, 1/16, 1/32, 1/64 3/4 $17.00 $15.30 6 (16R) 182-102 1/32, 1/64, 1/50, 1/100 3/4 $17.00 $15.30 6 x 150mm 182-105 1/32, 1/64, 1mm, 0.5mm 3/4 $17.00 $15.30 150mm 182-111 1mm, 0.5mm (both faces) 19mm $17.00 $15.30 12 x 300mm 182-125 1/32, 1/64, 1mm, 0.5mm 1 $35.00 $31.50 12 (4R) 182-121 1/8, 1/16, 1/32, 1/64 1 $35.00 $31.50 Edge Finders Hardened and ground on all surfaces. Edge Finders Order No. Shank (DIA) Tip (DIA) MSLP SPECIAL 050102 050101 0.4-7mm 188-122 21 Metric Screw $36.00 $32.40 0.4-7mm 188-121 18 Pitch (60 o ) $31.00 $27.90 4-42 TPI 188-111 30 Unified Screw $37.00 $33.30 4-84 TPI 950-253 51 Pitch (60 o ) $48.00 $43.20 0.4-7mm / 4-42 TPI 188-151 51 leaves: Set of 188-122 & 188-111 Thickness Gauges SERIES 950 Each leaf is marked with its thickness Each leaf is detachable if necessary Blade length 3 Thickness Gauges - Inch Metric & Unified Screw Pitch set (60 o ) $71.00 $63.90 Order No. Type of Blade MSLP SPECIAL 050101 3/8 (.375 ).20 $28.00 $25.20 050102 1/2 (.50 ).20 $29.00 $26.10.002 -.035 (26 leaves).0015 -.025 (26 leaves) 950-251 Straight 1/2 width 950-252 Tapered 1/4 width at tip $30.00 $27.00 $32.00 $28.80 Pocket Steel Rule 6 x 150mm with 1mm, 1/64ths graduations.engraved on front only. Inch/metric equivalents on back. Order No. 950-300 MSLP $11.00 SPECIAL: $9.90 Protractor SERIES 968 - Rectangular Base Scale plate and indicator blade are made entirely of stainless steel With 6 arm Protractor Order No. Graduation Remarks MSLP SPECIAL 4 968-201 1 Protractor Graduation: 0 90,90 180, 180 90, 90 0 $62.00 $55.80
Digital Protractors SERIES 950 Inclination Value Measurements Digital Protractors Order No. /Remarks Resolution MSLP SPECIAL 950-315 950-316 360 o (90 o x 4) Output N/A 360 o (90 o x 4) RS-232C compatible Digimatic Height Gauges Series 192 Standard or SPC Data Output Type Easy-to-use standard type Carbide-tipped scriber is provided Rigid construction Coarse/fine feed switching Switchable resolution* Two preset reference height Optional touch signal probe can be used with SPC model SPC Cable MSLP SPECIAL 905338: SPC cable (1m/40 ) $46.30 $41.67 905409: SPC cable (2m/80 ) $51.00 $45.90 Digimatic Height Gauge 0.1 o $347.00 $312.30 0.01 o (0 o to 9.99 o ) 0.1 o (10 o to 90 o ) Order No. MSLP SPECIAL 0-18 /0-450mm 192-631-10 Standard Model $1,757.00 1,581.30 $104.00 0-18 /0-450mm 192-671-10 SPC Data Output $1,934.00 1,740.60 $104.00 *Switchable resolution:.0005 (0.01mm) [.0002 (0.005mm)] DP-1VR SERIES 264 Data Collection and Processor Spring/Summer Flyer These Digital Protractors present inclination values on an easy-to-read liquid crystal display. The measurements are generated by an electronic gravity sensor and processed by the latest low-power electronic circuit technology. Alternate reference (zero) Reading hold Simple calibration requiring no special fixtures Display remains upright to view at all angles $571.00 $513.90 Touch Signal Probe Option For use with 192-671-10 Order No. 192-008 MSLP $724.00 SPECIAL $651.60 Compact palm-sized unit for printing measurement data from digimatic gauges or to perform statistical analysis Excellent functionality. Use it to print measurement data, perform a variety of statistical analyses, draw a histogram or D chart and also perform complicated operations for X-R control chart GO/NG judgment output as standard functions, this processor ensures high reliability as an advanced quality inspection machine Line thermal printer enables fast and quiet printing Bore Gauges SERIES 511 Carbide-tipped contact points for durability The dial indicator is fully protected by a rugged cover Optional extension rods can be attached for measuring deep holes Bore Gauges - Inch or Metric 511-173 Order No. Remarks MSLP SPECIAL 35-60mm ø 8mm 50-100mm ø 8mm 100-160mm ø 8mm.7-1.4" dia..375" 2-6" dia..375" During training, many new employees drop critical measuring equipment within the first day or two, usually condemning them to the trash. In my experience, Mitutoyo measuring tools are the only ones that can take this abuse and still retain their calibration! Joshua Bradshaw, Chief Engineer Rotomaster, Surrey, B.C. 511-127* 511-168 511-128* 511-178 511-104* No Dial Gauge 9 Anvils, 4 Spacers 2109SB-10 Graduation 0.001mm 9 Anvils, 4 Spacers No Dial Gauge 11 Anvils, 4 spacers 2109SB-10 Graduation 0.001mm 13 Anvils, 4 Spacers No Dial Gauge 8 Anvils, 3 Spacers $245.00 $220.50 N/A $430.00 $387.00 $81.00 $254.00 $228.60 N/A $586.00 $527.40 $81.00 $291.00 $261.90 N/A No Dial Gauge 511-107* 11 Anvils, + 2" Sub-Anvil, $339.00 $305.10 N/A 4 Spacers *Does not come supplied with Dial Gage Protector Cover ( 21DZA000 ) Order No. 264-504-5A MSLP $497.00 SPECIAL $447.30 Optional Accessories MSLP SPECIAL 09EAA084*: RS-232C changing cable (1m,9 pin) $331.00 $297.90 965516*: GO/±NG judgment cable $102.00 $ 91.80 937179T: Foot switch $111.00 $ 99.90 *RS-232C cable and GO/±NG judgment cable cannot be used at the same time DP-1VR shown with digimatic micrometer, cable and stand (sold separately) 5 5
Laser Scan Micrometer LSM-902 / 6900 SERIES 544 Ultra-high Accuracy Non-contact Measuring System LSM-6900 display unit 544-496A Specifications LSM-902 Measuring range Resolution Repeatability LSM-902 measuring unit.004-1.0 (0.1-25mm).000001 to.0005 (0.00001 to 0.01mm) [Selectable] ± 1.9µin (±0.05µm) Linearity Whole range ± 20µin (±0.5µm) Display Small range Spring/Summer Flyer ± (.000012 +.0001 D) [ D:inch] ±(0.3 + 0.1 D)µm [ D:mm] Fluorescent display 16-digit + 11 digit, Guidance LEDs SAVE 19% FEATURES Tolerance judgment (GO/±NG) Abnormal data elimination Automatic workpiece detection Statistical processing Dual program measurement Automatic measurement using edge mode Workpiece position display Transparent object measuring mm/inch changeover Selectable resolution Order No. 544-496A MSLP $12,916.00 SPECIAL $10,422.22 Optional Accessories MSLP SPECIAL 02AGD180: gauge set for $720.00 $ 648.00 LSM-902/6900 02AGD270: Workstage $1,035.00 $ 931.50 02AGD280: Adjustable workstage $2,150.00 $1,935.00 02AGD600B: Thermal printer $1,492.00 $1,342.80 (w/120vac adapter) Digital Readout Packages With ABSOLUTE Digital Readout Linear Scales & KA Counter SAVE WITH OUR PACKAGE DEALS DRO Packages for Lathe Systems AT715 SCALE FEATURES Using Electromagnetic Induction Detection with improved reliability and contamination protection - rated IP67 for dust and water True Absolute scale technology means original part datum point is never lost, even when power is off. KA COUNTER FEATURES Bolt Hole Circle Calculation, Diameter Display and Tool Offsets (Parameter mode), Memory compensation value, Selecting Coordinates 0 to 10, Preset, Zero Approach Machining, Pitch Approach Machining, 1/2 Calculation, Inch/mm Standard Resolution:.001 /.0005 /.0002 /.0001 /.00005 (0.01mm/0.005mm/0.002mm/0.0 01mm): When connecting AT715.002 /.0010 /.00 05 /.0004 /.0002 /.0002 (0.020mm/0.010mm/0.004mm/0.002mm) DRO PACKAGES for Lathes* Order No. Travel MSLP Pkg. PKG. SPECIAL D950-983 6 x 30" $1,580.00 $1,422.00 (Compare - MSLP if ordered separately $1,735.00) D950-984 8 x 40" $1,750.00 $1,575.00 (Compare - MSLP if ordered separately $1,914.00) D950-985 12 x 52" $1,815.00 $1,633.50 (Compare - MSLP if ordered separately $2,017.00) Order No. Travel MSLP Pkg. PKG. SPECIAL D950-986 12 x 60" $1,877.00 $1,689.30 (Compare - MSLP if ordered separately $2,086.00) D950-987 16 x 80" $2,250.00 $2,025.00 (Compare - MSLP if ordered separately $2,403.00) D950-988 16 x 120" $2,890.00 $2,601.00 (Compare -MSLP if ordered separately $3,102.00) *DRO Packages include: KA Counter (2-Axis), KA Counter Tray/arm kit, AT715 ABSOLUTE scales (2), Bracket Kit, Extension cable (if scale is over 36 /900mm) 6
Spring/Summer Flyer DT-10AS Dial Hardness Tester SERIES 963 Rockwell Hardness Tester FEATURES Economical Rockwell tester, ideal for quick, reliable material testing of a variety of soft or hard metal parts Maximum achievable workpiece height, using a flat anvil of 6.71 /170mm Adjustable dial indicator for easy zero-setting and fast part throughput Manual arm actuator design starts the hardness testing process 60, 100, 150kg loads are included to cover the range of Rockwell scales Full range of optional accessories are available Standard accessories: diamond indenter, flat anvil Ø63, large V-anvil (24 x Ø41), test block 60-65HRC, spirit level, accessory box, vinyl cover FREE Hardness Conversion Poster Optional Accessories MSLP SPECIAL 56AAE431 1/6" dia. steel ball indenter $750.00 $675.00 310401583 1/16 dia. spare steel ball $ 8.00 $ 7.20 078042 1/8 dia. steel ball indenter $500.00 $450.00 310403173 1/8 dia. spare steel ball $ 15.00 $ 13.50 075202 Round table Ø200mm $390.00 $351.00 075289 V-anvil, Small (5 x Ø20) $250.00 $225.00 075287 Spot anvil (Ø5 x 10) $190.00 $171.00 076212 Test block 90 HRB $780.00 $702.00 077794 Test block 25 HRC $630.00 $567.00 SPECIFICATIONS Model No. DT-10AS Maximum Height With Flat Anvil:4.13 /105mm (with Cover) With Round Table: 6.70 /170mm (no Cover) Distance (C.L.) Indenter for Frame 6.10 /155mm Scale Rockwell A - D - C (Diamond Indenter) F - B - G (1/16 dia. steel ball indenter) * H - E - K (1/8 dia. steel ball indenter) * Rockwell Readout Preload Testing Load Resolution 98.07N (10kgf) 588.4-980.7-1471 N (60-100 - 150 kgf) 0.5HR Dial Indicator (Manual zero setting) SAVE 25% Order No. 963-104 MSLP $5,500.00 SPECIAL $4,125.00 17025 : Included* *Travel related expenses extra Super Caliper - Solar Powered SERIES 500 No battery needed! Solar powered caliper needs no battery Eco-friendly components compatible with RoHS directives ABSOLUTE technology means no need to reset origin. Measurement can be started at power on IP-67 protection assures waterproof reliability Improved display unit impact resistance 0-6 /0-150mm range Resolution.0005 /0.01mm ID-F Digimatic Indicator SERIES 543 Colour changing LCD ABSOLUTE technology - all settings and readings are maintained even if powered off Immune to overspeed errors Red/green LCD indicates GO/±NG Analog bar display with adjustable range and tolerance indicators Multi-function (Preset, max/min hold, TIR function, ± direction, and more SPC digimatic output Selectable resolution (.00002",.00005",.0001",.0005",.001", 0.001mm, 0.01mm) 2" range SPC Cable Accessories MSLP SPECIAL 936937: SPC cable (1m/40 ) $66.80 $60.12 965014: SPC cable (2m/80 ) $95.00 $85.50 Order No. 500-784S MSLP $245.00 SPECIAL $220.50 17025 : $35.00 SAVE 34% Order No. 543-554A MSLP $793.00 SPECIAL $523.38 17025 : $35.00 7 7
NEW Spring/Summer Flyer Introducing... SJ-210 Surface Roughness Tester Series 178 Portable Surftest The new Surftest SJ-210 combines high accuracy and measurement speed with numerous innovative features, creating a new class leader in surface inspection. FEATURES 2.4 colour graphic LCD with back-lighting for easy viewing Measurement data and conditions can be stored in micro SD card Equipped with USB/IF for mass data transmission Wide selection of optional drive units and detectors available sj-210 SPECIFICATIONS Portable Surface Roughness Tester Feature Display Languages Measuring range Measuring speed Min. /Resolution No. Measurements Input/Output Memory Card (Option) External Printer (Option) NEW SJ-210 2.4" Colour Graphic LCD 16 Languages X =.68"/17.5mm (includes pre/post travel) Z = 14200 µin (360µm) 0.01, 0.02, 0.02"/s (0.25, 0.5, 0.75 mm/s) 1000 µin / 0.08 µin (25 µm / 0.002 µm) 1,000 or more (battery) USB, SPC, RS-232C (Printer output), foot switch, MicroSD (12AAL069-L) MicroSD card (178-421A) With Roll of 35m Thermal Paper Order No. 178-561-02A (4MN) Standard Drive Unit INTRODUCTORY PRICE $2,500.00 Cover slides open to access additional function keys SJ-210 Optional Accessories: Order No. Description (Stylus radius) MSLP SPECIAL 178-390 Standard Detector 4mN (5µm) $ 443.00 $ 398.70 178-391 Standard Detector 4mN (10µm) $ 443.00 $ 398.70 178-392 Small Hole Detector 4mN (5µm) $ 760.00 $ 684.00 178-393 Extra Small Hole Detector 4mN (5µm) $ 760.00 $ 684.00 178-398 Gear Tooth Detector 4mN (5µm) $1,600.00 $1,440.00 178-394 Deep Groove Detector 4mN (5µm) $ 760.00 $ 684.00 12AAA233 Height Gauge Adapter (Inch) $ 99.00 $ 89.10 Pulldown All detectors also available with.075mn measuring force and 2µm tip radius menu/ Plain menu structure Key-Cover and Key-Lock mode prevents operational errors Cross key operation Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring Sensor Systems Test Equipment and Seismometers Digital Scale and DRO Systems Distributed by: Small Tool Instruments and Data Management 8 I N D U S T R I A L S U P P LY C O M PA N Y LT D. 1411 Courtneypark Drive, Mississauga, On L5T 2E3 Phone: (905) 565-8700 Toll Free: 1-888-798-7533 Fax: (905) 565-8018 Website: www.tryhard.net Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We, therefore, reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the products are subject to Canadian Export Administration Regulations. Re-export or relocation of Mitutoyo products may require prior approval by an appropriate governing authority. Trademarks and Registrations: Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo Canada Inc. is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies should be contacted for more complete trademark and registration information. 2010 Mitutoyo Canada Inc., Mississauga ON Canada We reserve the right to change specifications and prices without notice. Mitutoyo Canada Inc. www.mitutoyo.ca Toronto 2121 Meadowvale Blvd. Mississauga, ON L5N 5N1 Tel. (905) 821-1261 Montreal 7075 Place Robert-Joncas, Suite 129 Montreal, QC H4M 2Z2 Tel. (514) 337-5994 Precision is our profession