Surplus Assets of BLOW PRESS LIMITED 2008 BRAND NEW 47.2 X 393.7 CAPACITY POREBA TPK-90/10M gap bed engine lathe REBUILT 2002 RADIO CONTROL BLOW SC2-600-144-60 straight side press REBUILT 2010 40-80 SPM MUNCK 50 ton double girder bridge crane BLOW SC2-400-84-48 straight side press (2) 60 TON HOOKS MUNCK 120 ton double girder twin hook bridge crane MAJOR STAMPING PRESS MANUFACTURER Wednesday, December 8, 2010 10:30 A.M. EST 633 Southgate Drive, Guelph, Ontario, N1G 3W6
BRAND NEW NEVER USED 600 TON PRESS 2008 BLOW SC2-600-144-60 straight side double crank press OMNILINK plc press controls 2 View of ram and ways 600 TON - 144 x 60 STAMPING PRESSES BLOW (2008 unused) SC2-600-144-60 straight side double crank press with 600 ton cap., 144 X 60 bed, 14 stroke, 32 shut height over bolster, 10 adjustment, 20-40 SPM, 54 X 28 windows, OMNILINK press controls s/n SDG-600-600-08 BLOW (remanufactured by BLOW 2010) SC2-400-84-48 straight side double crank press with 400 ton cap., 84 X 48 bed, 6 stroke, 36 shut height over bolster, 10 adjustment, 40-80 SPM, 24.5 X 33 windows, OMNILINK press controls s/n SDG-400-254-87 PROXY BIDDING If you are unable to attend this auction, we would be pleased to act as your proxy. Please contact our office at (416) 962-9600 or visit our website for a proxy bid form, terms and additional information. www.corpassets.com CONTACT 416.962.9600 TO CONSIGN EQUIPMENT AT AN UPCOMING AUCTION
40-80 SPM REBUILT BY BLOW 400 TON PRESS BLOW SC2-400-84-48 straight side double crank press POREBA TPK-90/10M gap bed engine lathe GAP BED ENGINE LATHE REBUILT 2010 View of POREBA TPK-90/10M headstock, saddle, and steady rests POREBA (rebuilt 2002) TPK-90/10M gap bed engine lathe with 36.2 swing over bed, 47.2 swing in gap, 12 gap length, 25.5 swing over cross slide, 393.7 between centers, 3.75 spindle bore, spindle speeds 8-800 RPM, threading: inch (60) 25-30 TPI, metric (62) 1-120 MM, module (44).025-30, 13,500 lbs. work weight between centers, 20,000 lbs. work weight w/2-steady rests, hardened bedways, power compound for taper turning, power rapid traverse, 31 4-jaw chuck, (2) roller type steady rests, 40 HP main drive motor s/n 0382-1179-878 TO SCHEDULE AN AUCTION CONTACT 416.962.9600 OMNILINK plc press controls FABRICATING HYD-MECH () F-10 horizontal band saw with 10 X 16 cap., 1 blade, power clamping s/n WF0599028; BROWN BOGGS 4 hand brake s/n n/a BROWN BOGGS 349C 4 X 14 ga. mechanical shear with squaring arm, manual back gauge s/n n/a MILLER DIALARC 250 AC/DC stick welder with cables & gun s/n JE778803 MILLER DIALARC 250 AC/DC stick welder with cables & gun s/n KH560788 LINCOLN IDEALARC R3R 500 stick welder with cables & gun s/n AC418785 UNITED AIR SPECIALISTS PORTACLEAN fume extractor s/n 60007082-1049 GREENLEE hydraulic conduit bender s/n n/a OSTER 655 2 bolt threader s/n ACD110 VICTAULIC () VE276 FSD pipe grooving machine s/n 276044 MACHINE SHOP ARCHDALE 6 radial arm drill with 14 column, speeds to 1000 RPM, #5MT, box table s/n n/a MAS VR4 4 radial arm drill with 10 column, speeds to 2000 RPM, #4MT, box table s/n 7498 LEBLOND REGAL 25/35 X 108 gap bed engine lathe with 2 bore, speed to 720 RPM, threading, taper turning, coolant s/n 5H321; HARBOTS & LEICESTER 6 X 18 hydraulic surface grinder with coolant s/n n/a ENSIGN 16/32 X 100 gap bed engine lathe with 3.25 bore, speeds to 750 RPM, threading s/n n/a CINCINNATI #3 horizontal milling machine with 62.5 X 15 table, speeds to 1300 RPM s/n 4A3PIK-35 BRIDGEPORT vertical milling machine with 9 X 42 table, power table feed, speeds to 4200 RPM, NEWALL 2 axis DRO s/n 54269 ARBOGA G2508 gear head drill s/n 311681 KING () KC40102F mill drill s/n 933915 RIDGID 1224 4 cap. pipe threader s/n 102343 3
LARGE CAPACITY LATE MODEL BRIDGE CRANES 60 TON MAIN-10 TON AUX SWL 60 ton double girder twin hook bridge crane MUNCK 120 ton double girder twin hook bridge crane MUNCK 50 ton double girder bridge crane (2) 60 TON HOOKS RADIO CONTROL CRANES MUNK () 120 ton double girder top running bridge crane with (2) 60 ton hoists on separate trolleys, 45 span, 45 vertical lift, lift speeds 8 & 1.25 FPM, trolley speeds 60 & 15 FPM, bridge speeds 80 & 20 FPM, radio remote control s/n 99-2804 SWL 60 ton double girder top running bridge crane with 45 span, 34.5 vertical lift, 10 ton auxiliary hoist on separate trolley, pendant control s/n 1742 MUNK () 50 ton double girder top running bridge crane with 35 span, 45 vertical lift, lift speeds 9 & 1.5 FPM, trolley speeds 60 & 15 FPM, bridge speeds 80 & 20 FPM, radio remote control s/n DETROIT HOIST 10 ton single girder underslung traveling gantry crane with 14 8 span, 15 vertical lift, pendant control, approx. 45 runway& busbar s/n 10787 STAHLKRAN 10 ton single girder underslung bridge crane with 21 span, 13 vertical lift, pendant control, approx. 160 runway& busbar s/n 998316 (Manufacturer Unknown) 1 ton 21 span single girder underslung bridge crane (Manufacturer Unknown) 1 ton jib hoist APPRAISAL SERVICES What s the real value of your equipment? If you require a detailed appraisal for banking, insurance, or internal purposes, consult with the certified experts at Corporate Assets Valuations. We provide appraisal services anywhere in the world for all types of industrial manufacturing and processing equipment. We will appraise one machine or your complete plant Going Concern, Fair Market or Liquidation Values Call us in complete confidence today with your requirements. Phone: (416) 962-9600 Fax: (416) 962-9601 Email: appraisals@corpassets.com STAHLKRAN 10 ton single girder bridge crane DETROIT HOIST 10 ton single girder bridge crane 1 ton single girder bridge crane This brochure is only a partial listing. VISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS www.corpassets.com 4
LARGE QUANTITY OF MATERIAL HANDLING EQUIPMENT 7+ AVAILABLE Partial view of electric scissor lifts available RIDGID 1224 pipe threader ENSIGN gap bed engine lathe 32 x 100 CAPACITY LEBLOND REGAL gap bed engine lathe 35 x 108 CAPACITY 12,000 LB CAP HYD-MECH F-10 horizontal band saw HYSTER S100XL indoor lpg forklift 1997 JLG N40 electric boom lift THINKING OF HAVING A SALE? CONTACT CORPORATE ASSETS INC. IN COMPLETE CONFIDENCE MAS VR4 4 radial arm drill 4,500 LB CAP CATERPILLAR T50D5A indoor lpg forklift SCISSOR/BOOM LIFTS JLG (1997) N40 ELECTRIC articulating boom lift with 40 vertical reach, 20.5 horizontal reach, 500 lbs. max cap. s/n 039256 0300027380 UPRIGHT TIGER 512400 electric scissor lift with 24 max. platform height, 800 lbs. max platform lift s/n 1784 JLG COMMANDER 2032E2 electric scissor lift with 20 max. platform height, 750 lbs. max platform lift s/n n/a JLG COMMANDER 1432 electric scissor lift with 20 max. platform height, 500 lbs. max platform lift s/n n/a JLG COMMANDER 1432 electric scissor lift with 20 max. platform height, 500 lbs. max platform lift s/n C017203 0200017039 SKYJACK SJ006.5-10 electric scissor lift with 24 max. platform height, 450 lbs. max platform lift s/n 080 SKYJACK SJ006.5-10 electric scissor lift with 24 max. platform height, 450 lbs. max platform lift s/n GZR This brochure is only a partial listing. VISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS www.corpassets.com 5
HUGE QUANTITY OF FACTORY SUPPORT EQUIPMENT 2002 BUICK GRAND SPORT sedan 4 AVAILABLE TOLEDO TRANSDUCERS AUTOCELL AC 500, 500 ton capacity digital load levelers 1996 FORD F150XL pick up truck ATLAS COPCO GA37 50 HP rotary screw air compressor Partial view of wire Large quantity of gears available 1995 FORD F-Series Straight 6 diesel truck Partial view of heavy duty lifting chains Partial view of carbide inserts Partial view of tooling GREENLEE hydraulic conduit bender Approx. 40,000 sq ft manufacturing facility for sale - Contact for details FORKLIFTS HYSTER S100 XL 12000 lbs. LPG forklift with 136 vertical lift s/n D004V03736L CATERPILLAR T50D5A 4500 lbs. LPG forklift with 173 vertical lift s/n 2LC30114 CLARK C500H40 4500 lbs. LPG forklift with 153 vertical lift s/n H355-194-2561 VEHICLES Partial view of power tools Spare Parts inventory including: bearings, gears, electrical components, couplings, fittings, valves, pins, gauges, springs, sleeves, and much more! BUICK (2002) GRAND SPORT VIN 2G4WF551231200986 FORD (1996) F150XL pickup truck with camper shell VIN 1FTEF15N4TLB54423 FORD (1995) F-Series Straight 6 Diesel engine auto transmission truck RECENTLY CERTIFIED (manual and recent expenses to certified listed), fully operational cherry picker. Originally part of Toronto Hydro fleet - 95,000 kms Steel stands and platforms FACTORY EQUIPMENT View of power tools (4) TOLEDO TRANSDUCERS AC 500 AUTOCELL calibration load cells with 500 ton cap s/n n/a FAIRBANKS IND-HR2300-2 weighing assembly s/n H585472RL micrometers, verniers, height gauges, squares, straight edges, levels ATLAS COPCO () GA37 50 HP rotary screw air compressor with receiver tank s/n AII 362285 (2) 10 X 13 X 8 portable offices, pedestal grinders, belt sanders, arbour press, mag drills, chop saws, vacuum cleaners wire mesh baskets, dumping hoppers, racking & shelving, fans, very large assortment of carbide inserts, perishable tooling, office furniture, PC s, and much more ONSITE Surplus to the Ongoing Operations of KUBES MACHINING CNC Boring and Machining Facility Stoney Creek, Ontario L8E 5N2 Tuesday, December 07, 2010 10:30 AM EST JEUNE METAL PRODUCTS LTD High Precision Hydroforming & CNC Spinning Facility Markham, Ontario L3R 5J6 Thursday, January 20, 2011 10:30 AM EST MICRO-TECH MACHINE INC High Tech CNC Machining Facility Milton, Ontario L9T 5C1 Tuesday, December 14, 2010 10:00 AM EST MEMBER IN GOOD STAN DING Printed in Cana da. 2010 CO RPOR ATE ASSETS INC. ALL RIGH TS RESERVED.
AUCTION DETAILS INSPECTION Tuesday, December 7, 2010 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction. REMOVAL Small items: Thursday, December 9, 2010 by 5:00 P.M. Remaining items: Monday, December 20, 2010 by 5:00 P.M. DIRECTIONS Visit our website at www.corpassets.com, click on Upcoming Auctions: Blow Press Limited button, click on Map tab and get directions by accessing the pop up address info box. ACCOMMODATIONS & CAR RENTALS Please visit our website for details at www.corpassets.com PAYMENT Please visit our website for details at www.corpassets.com A Buyer s Premium will apply at this sale. We Accept Visit our website as specific terms and conditions may apply. TERMS Corporate Assets Inc. assumes no liability for errors or omissions in this brochure. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale. APPRAISAL SERVICES What s the real value of your equipment? If you require a detailed appraisal for banking, insurance, or internal purposes, consult with the certified experts at Corporate Assets Valuations. We provide appraisal services anywhere in the world for all types of industrial manufacturing and processing equipment. We will appraise one machine or your complete plant Going Concern, Fair Market or Liquidation Values Call us in complete confidence today with your requirements. Phone: (416) 962-9600 Fax: (416) 962-9601 Email: appraisals@corpassets.com AUCTION CONDUCTED BY CORPORATE ASSETS INC. For further information contact us at: 2 St. Clair Ave. W., Suite 1002 Toronto, Ontario, Canada M4V 1L5 Tel: (416) 962-9600 Fax: (416) 962-9601 Email: info@corpassets.com Web: www.corpassets.com Toronto Montreal Chicago