ELECTRIC WIRE ROPE HOISTS LODEKING LT 10 TO 25 TON LOW-HEADROOM MODELS 15 THROUGH 25 HP LODEKING 15 TO 60 TON HIGH-CAPACITY MODELS 30 THROUGH 60 HP C O L U M B U S M c K I N N O N C O R P O R A T I O N
ELECTRIC WIRE ROPE HOISTS Yale LodeKing wire rope hoists combine the durability you have come to expect from Yale with the higher capacities your applications demand. Built with 140 years of engineering know how, these best-in-class hoists combine the latest manufacturing and materials technology with the highest quality components for unsurpassed performance and reliability. Made in America, the LodeKing LT and LodeKing are designed for heavy-duty CMAA Class D service. These hoists feature industry-leading Magnetek closed-loop variable frequency drives, allowing for accurate and precise load control while reducing brake wear. 4 8 12 TABLE OF CONTENTS LODEKING LT Electric Wire Rope Hoists (Low-Headroom Models) LODEKING Electric Wire Rope Hoists (High-Capacity Models) ADDITIONAL INFORMATION Magnetek IMPULSE VG+ Series 4 Drives Plastic-Infused Wire Rope Pulse Monitor Electronic Hoist Data Interface
<< 20-TON LODEKING LT << 30-TON LODEKING 3
LODEKING LT & LODEKING ELECTRIC WIRE ROPE HOISTS The Yale LodeKing LT wire rope hoist provides the same high-quality performance and durability of the original LodeKing in an ultra-low-headroom design, making it the ideal choice when purchasing a new or replacement hoist for applications with space limitations. The LodeKing LT features plastic-infused wire rope that prevents metal-to-metal contact between strands, helping to reduce abrasion and wear within the wire rope. Manufactured in Wadesboro, North Carolina, the LodeKing LT low-headroom models are available in capacities from 10 to 25 tons and, depending on your application needs, are available in economical low-horsepower, top-running and deck-mount models. CAPACITIES 10 to 25 TONS KEY SPECIFICATIONS Service Class Feature Design Safety Factor Bottom-Block-Sheaveto-Rope Ratio Operating Environment Hook Assembly Rope Guide Drum Safety Wraps 3 Hoist Control LODEKING LT CMAA Class D, ASME / HMI Class H4 5:1 (min.) ~22:1 (min.) Indoor 360 rotation with safety latch No Steel drum w/nominal 50% groove depth ~21:1 (min.) drum-to-rope ratio Closed-Loop (Flux Vector) VFD Feature Hoist Limit Switches Trolley Control Trolley Brake LODEKING LT Two-position rotary cam upper/lower type plus upper block type limit switch Open-Loop VFD Included Control Enclosure Nema 4/12 Voltages Pendant Bearings CSA Approval UL Approval Line: 460-3-60 Optional 208-3-60, 230-3-60 & 575-3-60 Control: 115-1-60 Not included as standard Sealed and/or shielded, lifetime lubricated Pending No STANDARD FEATURES: 4 1 TRUE VERTICAL LIFT Better load control. Easy movement 5 and placement of product. 2 3 4 HEAVY-DUTY STEEL DRUM 50% groove depth to guard against rope jumping out of groove. INDUSTRY-PROVEN GEAR DRIVE Easy-to-maintain gear drive features a sight glass for quick inspection of the oil level. Standard availability improves product lead time. STANDARD FLUX VECTOR HOIST DRIVE PACKAGE Improves load control and allows for precise movements. Reduces brake wear. 6 7 PLASTIC-INFUSED WIRE ROPE Plastic-coated core prevents metal-tometal contact between the core and outer strands, helping to reduce abrasion and wear while increasing the rope strength. TROLLEY VFD CONTROL STANDARD ON ALL UNITS Allows for smooth acceleration and deceleration. SUPPLEMENTAL UPPER & LOWER LIMIT SWITCH Safely stops load from being lifted or lowered beyond set limits, reducing damage to equipment and hoist. 8 9 10 EXCEEDS CMAA CLASS D ROPE TO SHEAVE & DRUM DIAMETER Reduces rope maintenance. 200% MOTOR BRAKE TORQUE RATING Secondary brake exceeds CMAA Standards. Stops and holds a rated load quickly and securely. EXTERNAL HOIST BRAKE RESISTOR Allows for dynamic braking and uninterrupted drive service at high duty cycles. Hoists are not equipped with load brakes, reducing heat generation in high-duty-cycle applications.
11 9 3 1 2 5 4 6 7 13 10 12 8 15-TON LODEKING LT >> CSA APPROVAL PENDING DECK-MOUNT LODEKING LT OPTIONAL FEATURES: 11 15 TO 25 HP MOTORS AVAILABLE Offers wide range of hoist lifting speeds. LOAD SENSING Standard field programmable. 12 13 WHEEL BLOCKS USING INTEGRAL AXLE TROLLEY WHEEL COMPONENTS Ideal for Class D service requirements. Ball bearings used on 10-ton capacity and roller bearings used for 15 through 25-ton capacities. THERMAL OVERLOAD PROTECTION Provided within the drive. AUXILIARY HOLDING BRAKE WIDE RANGE OF LIFTS & TROLLEY GAGES OVERLAY PROTECTION WITH SPOOLING BAR GEAR MOTOR COLOR Optional black or yellow painted gear motor. Optional black gear motor. Optional yellow gear motor. 5
LODEKING LT & LODEKING ELECTRIC WIRE ROPE HOISTS MODEL COMPARISON Feature Capacity (US Tons) 10 15 20 25 Hoist Lifting Speed (FPM) 21 14 10 9 Standard Hoist Motor Hp 15 15 15 15 Optional Lifting Speeds Available (FPM) 29, 35 19, 23 14, 17 11, 15 Standard Hoist Motor Frame Size (IEC Designations) 132MC 132MC 132MC 132MC Hoist Full Load Amps @ 460V Power 21.9 21.9 21.9 21.9 Hoist Inverter Amps @ 460V Power 24 24 24 24 Hoist Motor Rpm 1,740 1,740 1,740 1,740 Hoist Bearing Life (hrs.) 10,000 10,000 10,000 10,000 Trolley Traverse (FPM) 100 100 100 100 Trolley Motor Hp 1.5 (x2) 1.5 (x2) 2 (x2) 2 (x2) Trolley Motor Frame Size D71 D80 D90L D90L Trolley Full Load Amps @ 460V Power 2.3A (x2) 2.3A (x2) 3.2A (x2) 3.2A (x2) Trolley Inverter Amps @ 460V Power 4.8A 4.8A 9.2A 9.2A Trolley Motor Rpm 3,960/72.8 3,960/72.8 1,670/37.4 1,670/37.4 Trolley Bearing Life (hrs.) 10,000 10,000 10,000 10,000 Standard Gage (in.) 60 60 60 60 Standard Lift (ft.) 41 27 20 18 Maximum One Wheel Load (lbs.) 6,800 9,900 12,000 14,600 Trolley Wheel Diameter (mm) 200 200 260 260 Trolley Wheel Hardness (BHN) 300-350 300-350 300-350 300-350 Axle Bearings Roller Roller Roller Roller Operate On Both ASCE Rail & Square Bar Yes Yes Yes Yes Hoist Motor Brake Type DC DC DC DC Manual Release Type Yes (Spring Return To On) Yes (Spring Return To On) Yes (Spring Return To On) Yes (Spring Return To On) Hoist Motor Torque Rating (Brake Rating 200% Min.) 150Nm (247%) 150Nm (247%) 150Nm (247%) 150Nm (247%) Hoist Motor Duty S3-60% Duty S3-60% Duty S3-60% Duty S3-60% Duty Motor Insulation Class F F F F Hoist Thermal Overload Protection TAS In Motor & Thermal Overload Provided By VFD Trolley Drive Type VFD VFD VFD VFD Trolley Motor Brake Type DC DC DC DC Manual Release Type N/A N/A N/A N/A Trolley Motor Torque Rating (Brake Rating 50% Min.) 2.5Nm (86.5%) 2.5Nm (86.5%) 10Nm (116.6%) 10Nm (116.6%) Trolley Motor Duty S3-40% S3-40% S3-40% S3-40% Motor Insulation Class F F F F Trolley Thermal Overload Protection TAS In Motor & Thermal Overload Provided By VFD Number Of Reductions On Gear Drive 3 3 3 3 Helical Gear Or Combination Helical & Spur Helical Helical Helical Helical AGMA Standard AGMA Class 13 AGMA Class 13 AGMA Class 13 AGMA Class 13 Gear Case Material Gray Iron Gray Iron Gray Iron Gray Iron Overhung Gearing No No No No Parts Of Rope 4 6 8 8 Rope Diameter (mm) 12 12 12 13 Wire Rope Type 8 X 25 Construction Compact 8P Plastic Infused Wire Rope Drum Material Steel Steel Steel Steel Wire Rope Drum Diameter (in.) 10 10 10 10.5 Wire Rope Drum Groove Depth (%) 50 50 50 50 Upper Block Sheave Material Steel Steel Steel Steel Upper Block Sheave Diameter (in.) 10.63 10.63 10.63 10.63 Removable From Upper Sheave Nest Yes Yes Yes Yes Lower Block Sheave Material Steel Steel Steel Steel Lower Block Sheave Diameter (in.) 10.63 10.63 10.63 10.63 Roller Thrust Bearing Yes Yes Yes Yes Hook Material Alloy Alloy Alloy Alloy 6
ULTRA-LOW HEADROOM The LodeKing LT features an ultra-low-headroom design and is the ideal choice when purchasing a new or replacement hoist for applications with space limitations. 10 TON MODELS 16" 19" *Shown with optional Spooling Bar TOP OF RAIL TO TOP OF HOIST: 16 in. TOP OF RAIL TO HOOK SADDLE: 19 in. 15 TON MODELS 16" 27" TOP OF RAIL TO TOP OF HOIST: 16 in. TOP OF RAIL TO HOOK SADDLE: 27 in. 20 TON MODELS 16" 31" TOP OF RAIL TO TOP OF HOIST: 16 in. TOP OF RAIL TO HOOK SADDLE: 31 in. 25 TON MODELS 16" 33" TOP OF RAIL TO TOP OF HOIST: 16 in. TOP OF RAIL TO HOOK SADDLE: 33 in. 7
LODEKING LT & LODEKING HIGH-CAPACITY ELECTRIC WIRE ROPE HOISTS When you need a heavy-duty, high-capacity wire rope hoist, turn to the Yale LodeKing. Manufactured in Salem, Ohio, the LodeKing is available in capacities from 15 to 60 tons. The LodeKing is engineered with an efficient, space-saving center drive configuration and dual drum design for superior load control and centering. These hoists also feature a robust commercial gear drive that delivers reliable performance with easy maintenance. CAPACITIES 15 to 60 TONS KEY SPECIFICATIONS Service Class Feature Design Safety Factor Bottom-Block-Sheaveto-Rope Ratio Operating Environment Hook Assembly Rope Guide Drum Safety Wraps 3 Hoist Control LODEKING CMAA Class D, ASME / HMI Class H4 5:1 (min.) 24:1 (min.) Indoor 360 rotation with safety latch No Steel drum w/nominal 50% groove depth 24:1 (min.) drum to rope ratio Closed-Loop (Flux Vector) VFD Feature Hoist Limit Switches Trolley Control Trolley Brake LODEKING Two-position rotary cam upper/lower type plus upper block type limit switch Open-Loop VFD Included Control Enclosure Nema 4/12 Voltages Pendant Bearings CSA Approval UL Approval Line: 460-3-60 Optional 208-3-60, 230-3-60 & 575-3-60 Control: 115-1-60 Not included as standard Sealed and/or shielded, lifetime lubricated Optional No STANDARD FEATURES: 8 1 TRUE VERTICAL LIFT Better load control. Easy movement 5 and placement of product. 2 3 4 CENTER DRIVE CONFIGURATION Improves load centering on the crane and provides cleaner outside dimensions. WELDED ECCENTRIC OUTER BEARING Welding prevents tampering with the bearing. It also allows for fast, easy change-out of bearing in the field with no adjustments required. No shims needed. INDUSTRY-PROVEN GEAR DRIVE Easy-to-maintain gear drive features a sight glass for quick inspection of the oil level. Standard availability improves product lead time. 6 7 8 STANDARD FLUX VECTOR HOIST DRIVE PACKAGE Improves load control and allows for precise movements. Reduces brake wear. SUPPLEMENTAL UPPER & LOWER LIMIT SWITCH Safely stops load from being lifted or lowered beyond set limits, reducing damage to equipment and hoist. EXCEEDS CMAA CLASS D ROPE TO SHEAVE & DRUM DIAMETER Reduces rope maintenance. 200% MOTOR BRAKE TORQUE RATING Secondary brake exceeds CMAA Standards. Stops and holds a rated load quickly and securely. 9 10 11 12 30 TO 60 HP MOTORS AVAILABLE Offers wide range of hoist lifting speeds. BUILT-UP CONSTRUCTION Fabricated frames made from steel structures add structural integrity. ROTATING AXLE TROLLEYS Ideal for Class D service requirements. Longer bearing life with roller bearings versus ball bearings for capacities over 30 ton. THERMAL OVERLOAD PROTECTION Provided within the drive.
2 4 5 6 8 9 12 3 10 11 1 60-TON LODEKING >> OPTIONAL FEATURES: ION NITRIDING OF SHEAVES & DRUMS LOAD SENSING Standard field programmable. OVERLAY PROTECTION WITH SPOOLING BAR CUSTOM TROLLEY GAGES AUXILIARY HOIST CSA MODELS Available through special inspection. 9
LODEKING LT & LODEKING HIGH-CAPACITY ELECTRIC WIRE ROPE HOISTS MODEL COMPARISON Feature Capacity (US Tons) 15 20 25 30 40 45 50 60 Hoist Lifting Speed (FPM) 30 22 18 15 14 13 14 12 Standard Hoist Motor Hp 30 30 30 30 40 40 50 50 Optional Lifting Speeds Available (FPM) 40, 50, 60 29, 37, 45 24, 30, 36 20, 25, 30 18, 21 16, 20 17 14 Standard Hoist Motor Frame Size (IEC Designations) 180L 180L 180L 180L 200L 200L 225S 225S Hoist Full Load Amps @ 460V Power 37.2 37.2 37.2 37.2 48 48 58 58 Hoist Inverter Amps @ 460V Power 45 45 45 45 60 60 75 75 Hoist Motor Rpm 1,765 1,765 1,765 1,765 1,780 1,780 1,765 1,765 Hoist Bearing Life (hrs.) 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 Trolley Traverse (FPM) 100 100 100 100 100 100 100 100 Trolley Motor Hp 1.5 (x2) 1.5 (x2) 2 (x2) 2 (x2) 3 (x2) 3 (x2) 3 (x2) 5 (x2) Trolley Motor Frame Size D80 D80 D90L D90L 215 w/ 184TC Face 215 w/ 184TC Face 215 w/ 184TC Face 215TC Trolley Full Load Amps @ 460V Power 2.3 (x2) 2.3 (x2) 3.2 (x2) 3.2 (x2) 4.5 (x2) 4.5 (x2) 4.5 (x2) 7 (x2) Trolley Inverter Amps @ 460V Power 4.8 4.8 9.2 9.2 14.8 14.8 14.8 18.0 Trolley Motor Rpm 3,960 3,960 1,670 1,670 1,725 1,725 1,725 1,725 Trolley Bearing Life (hrs.) 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 Standard Gage (in.) 60 60 60 72 78 78 84 84 Standard Lift (ft.) 50 50 33 44 37 30 33 28 Maximum One Wheel Load (lbs.) 9,000 12,000 15,000 18,000 24,000 27,000 30,000 36,000 Trolley Wheel Diameter 200 mm 200 mm 260 mm 260 mm 12 in. 12 in. 12 in. 15 in. Trolley Wheel Hardness (BHN) 300-350 300-350 300-350 300-350 400-450 400-450 400-450 400-450 Axle Bearings Roller Roller Roller Roller Roller Roller Roller Roller Operate On Both ASCE Rail & Square Bar Yes Yes Yes Yes Yes Yes Yes Yes Hoist Motor Brake Type DC DC DC DC DC DC DC DC Manual Release Type Yes (Spring Return to On) Yes (Spring Return to On) Yes (Spring Return to On) Yes (Spring Return to On) Yes (Spring Return to On) Yes (Spring Return to On) Yes (Spring Return to On) Yes (Spring Return to On) Hoist Motor Torque Rating (Brake Rating 200% Min.) 210.29% 210.29% 210.29% 210.29% 252.85% 252.85% 202.19% 202.19% Hoist Motor Duty S3-60% Duty S3-60% Duty S3-60% Duty S3-60% Duty S3-60% Duty S3-60% Duty S3-60% Duty S3-60% Duty Motor Insulation Class F F F F F F F F Hoist Thermal Overload Protection TAS In Motor & Thermal Overload Provided By VFD Trolley Drive Type VFD VFD VFD VFD VFD VFD VFD VFD Trolley Motor Brake Type DC DC DC DC AC AC AC AC Manual Release Type N/A N/A N/A N/A Maintained - Auto Reset Maintained - Auto Reset Maintained - Auto Reset Maintained - Auto Reset Trolley Motor Torque Rating (Brake Rating 50% Min.) 86.50% 86.50% 116.60% 116.60% 65.72% 65.72% 65.72% 65.70% Trolley Motor Duty S3-40% S3-40% S3-40% S3-40% 30 Minute 30 Minute 30 Minute 30 Minute Motor Insulation Class F F F F F F F F Trolley Thermal Overload Protection TAS In Motor (Standard): Thermal Overload External (Optional) Number Of Reductions On Gear Drive 3 3 3 3 3 3 3 3 Helical Gear Or Combination Helical & Spur Helical Helical Helical Helical Helical Helical Helical Helical AGMA Standard AGMA Class 13 AGMA Class 13 AGMA Class 13 AGMA Class 13 AGMA Class 13 AGMA Class 13 AGMA Class 13 AGMA Class 13 Gear Case Material Gray Iron Gray Iron Gray Iron Gray Iron Gray Iron Gray Iron Gray Iron Gray Iron Overhung Gearing Yes Yes Yes Yes Yes Yes Yes Yes Parts Of Rope 4 4 6 6 8 10 10 12 Rope Diameter (mm) 16 16 16 16 16 16 16 16 Wire Rope Type Dynaflex DFS 8 Wire Rope Drum Material Steel Steel Steel Steel Steel Steel Steel Steel Wire Rope Drum Diameter (in.) 16 16 16 16 16 16 16 16 Wire Rope Drum Groove Depth (%) 50 50 50 50 50 50 50 50 Upper Block Sheave Material Steel Steel Steel Steel Steel Steel Steel Steel Upper Block Sheave Diameter (in.) 16 16 16 16 16 16 16 16 Removable From Upper Sheave Nest Yes Yes Yes Yes Yes Yes Yes Yes Lower Block Sheave Material Steel Steel Steel Steel Steel Steel Steel Steel Lower Block Sheave Diameter (in.) 16 16 16 16 16 16 16 16 Roller Thrust Bearing Yes Yes Yes Yes Yes Yes Yes Yes Hook Material Steel Steel Steel Steel Steel Steel Steel Steel 10
30-TON LODEKING >> WITHOUT MOUNTED ENCLOSURE << 60-TON LODEKING WITH MOUNTED ENCLOSURE 11
LODEKING LT & LODEKING LOOK WHAT S DRIVING YOUR HOIST Magnetek s IMPULSE VG+ Series 4 drive, used in the Yale LodeKing & Yale LodeKing LT, offers industry-leading safety and performance. FEATURES & BENEFITS MAGNETEK IMPULSE VG+ SERIES 4 DRIVE USED FOR HOIST CONTROL Industry-leading safety and performance features. MULTIPLE CONTROL OPTIONS 2-step infinitely variable control as standard. Available with additional control options including 3-step infinitely variable control, 2-speed multi-step control and 3-speed multi-step control. MULTIPLE POWER SUPPLIES Available for 208V-3PH-60HZ, 230V-3PH-60HZ, 460V-3PH-60HZ and 575V-3PH-60HZ power supplies. FAULT HISTORY Recorded history to aid in troubleshooting. EQUIPPED WITH 115V INTERFACE CARD Compatible with existing 115V crane control systems. Additional control voltages available upon request. EXTERNAL HOIST BRAKE RESISTOR Allows for dynamic braking and uninterrupted drive service at high duty cycles. MOTOR THERMAL OVERLOAD PROTECTION Drive offers built-in thermal overload and overcurrent protection. LOAD CHECK II Continuously monitors the hoist hook load during acceleration and constant speed, eliminating the need for load cells in most applications. Note: Optional feature. Request upon order. ANTI-SHOCK FEATURE Automatically stabilizes loads by detecting and minimizing rapid increases in motor torque, reducing the potential for crane damage caused by operator-induced load shock. Note: Optional feature. Request upon order. KEYPAD WITH DIGITAL DISPLAY Magnetek s user-friendly keypad with digital display gives you five lines of 16 characters each and includes soft keys and upgraded parameter selection. The display makes navigation and reading diagnostics even easier and allows for: PROGRAMMING VARIOUS DRIVE PARAMETERS PARAMETER BACK-UP (STORE AND COPY) READING OF ALPHA-NUMERIC FAULT DIAGNOSTIC INSTRUCTIONS REMOTE MONITORING MONITORING FUNCTIONS OF THE DRIVE 12
GET MORE LIFE OUT OF YOUR WIRE ROPE Yale LodeKing LT hoists use a plastic-infused wire rope, specifically developed for maximum performance on overhead cranes. FEATURES & BENEFITS REDUCED WEAR Plastic-coated core prevents metal-to-metal contact between the core and outer strands, helping to reduce abrasion and wear within the wire rope. INCREASED STRENGTH & LONGER LIFE Plastic-infused construction increases rope strength by 15-20%, providing structural stability and increasing rope fatigue life. Plastic-infused wire rope available on Yale LodeKing LT models only. 13
LODEKING LT & LODEKING PULSE MONITOR ELECTRONIC HOIST DATA INTERFACE The proper use and maintenance of your Columbus McKinnon powered hoists can help ensure a long service life as well as operator safety. Pulse Monitor is an electronic monitoring system that records key performance data for your hoist during normal operation. The captured data can be read with the Pulse computer interface kit* to assist you in troubleshooting and determining preventative maintenance solutions. A more accurate diagnosis can help reduce maintenance costs and minimize downtime. Pulse Monitor card and interface kits are available for the Yale LodeKing & LodeKing LT electric wire rope hoists. WHAT INFORMATION DOES THE PULSE MONITOR RECORD? The Pulse Monitor electronically captures key information with a time and date stamp every time the hoist s motor is powered on, including: MOTOR STARTS A motor start is recognized by energization of either the slow or fast motor winding for 300ms or more. CUMULATIVE RUN TIME Every time the motor is energized, the Pulse Monitor records how long it runs and adds to the cumulative total run time. PLUG EVENT (EXCESSIVE PLUGGING) A plug event is recorded when the directional contactor (node 0A or 1A) is energized four times within any two second period of operation. OVERCAPACITY EVENT An overcapacity trip will be recorded when the monitor card terminals K1 and K2 measure 115 volts** and terminal 0A is at 0 volts. The overcapacity event is recorded based on absence of a voltage at the normally closed contact from the overload limit switch relay. It is not measuring load on the motor, but rather the state of the overload limit switch. MOTOR TRIP EVENT A motor trip event will be recorded when the monitor card terminal K1 measures 115 volts** and terminal K2 is at 0 volts. VOLTAGE MEASUREMENT For every motor event, the voltage will be measured. Pulse Monitor Interface Kit with USB Adaptor 14
TOTAL COST OF OWNERSHIP The long-term expense of maintenance, service fees and replacement parts can add up over the full service life of a hoist. All of these after-sale costs contribute to the total cost of ownership which is an important factor to consider when making a purchasing decision. The Pulse Monitor can help provide an even lower total cost of ownership for your CMCO hoist, by allowing for: BETTER MAINTENANCE TIMING Consistently monitors motor starts, hoist run time and cumulative run time for preventative maintenance planning. REDUCED DOWNTIME DUE TO IMPROPER HOIST USE Monitors excessive hoist use, excessive plugging, motor trip events and overcapacity events. VERIFICATION OF CLEAN LINE VOLTAGE Measures voltages for every motor event to ensure hoist is running on adequate line voltage. LONGER HOIST LIFE Allows operator to schedule maintenance at regular intervals and monitor hoist abuse. PULSE MONITOR KIT OFFERING The Pulse Monitor is available in 2 different kit varieties to accommodate individual needs. PULSE MONITOR INDIVIDUAL CARD KITS Catalog #: PCARDKIT1 (Use with 115V control) Catalog #: PCARDKIT2 (Use with 24V control) Use kits to install Pulse Monitor Card on CMCO hoists that do not include card as standard equipment. To read data on the card, a computer interface kit, sold separately, is also required. Kit includes: (1) Pulse Monitor Card (1) Card Mounting Bracket (1) Pulse Monitor Software Disk (6) Pan Head Phillips Screw Self Tap #6-32 X 5/8" (includes 2 extra) (3) Pan Head Phillips Screw Self Tap #10-24 X 1/4" (includes 1 extra) (10) Terminal Wire Insulated Female Quick Connector Panduit Part no. DNR14-188F1B-C (tab size 0.187 X 0.020) (includes 3 extra) (1) 16# Insulated Wire (15 ft.) PULSE MONITOR COMPLETE CARD & INTERFACE KITS Catalog #: PCOMPLETEKIT1 (Use with 115V control) Catalog #: PCOMPLETEKIT2 (Use with 24V control) Use to install Pulse Monitor Card on CMCO hoists that do not include the Pulse Monitor Card as standard equipment. Kit also includes computer interface kits required to read card data. (Requires 3" X 5-1/4" X 2-1/2" envelope in control enclosure.) Kit includes: (1) Pulse Monitor Card (1) Card Mounting Bracket (1) Pulse Monitor Computer Interface (9V battery not included) (2) Serial Extension Cable (6 ft.) (1) Pulse Monitor Software Disk (1) StarTech.com USB Adaptor Software Disk (1) Serial Port to USB Adaptor Cable (3 ft.) (6) Pan Head Phillips Screw Self Tap #6-32 X 5/8" (includes 2 extra) (3) Pan Head Phillips Screw Self Tap #10-24 X 1/4" (includes 1 extra) (10) Terminal Wire Insulated Female Quick Connector Panduit Part no. DNR14-188F1B-C (tab size 0.187 X 0.020) (includes 3 extra) (1) 16# Insulated Wire (15 ft.) Note: Kit also includes a DB9 to DB25 pin adapter for 25-pin RS232 serial communication, which will not be needed in most cases. * Computer interface kit (sold separately) is required to read Pulse Monitor Card data. ** While the Pulse Monitor itself is capable of +/-5% voltage measurement accuracy, two additional factors may further decrease accuracy. Motor voltage is calculated using the control voltage powering the Pulse Monitor. This calculation is based on the ideal ratio of the control transformer (primary voltage to secondary voltage). Any variation in the control transformer ratio will consistently skew the motor voltage data. Additionally, this voltage measurement is made at the point where the Pulse Monitor is connected. If this point is significantly removed from the motor being monitored, a noticeable voltage drop may exist. The user is cautioned to consider both these contributing factors while interpreting the stored voltage data. 15
YOUR ONE SOURCE FOR FLOOR-TO-CEILING SYSTEMS Since 1875, Columbus McKinnon has helped to make material handling easier and safer, and, today, is your single source for complete floor-toceiling lifting systems. From below-the-hook attachments, chain, rigging products, manual and powered chain hoists to electric wire rope hoists, cranes, enclosed track systems and specially engineered products, Columbus McKinnon has the engineering expertise to meet the most demanding applications. KNOW HOW. KNOW WHY. Columbus McKinnon is committed to providing expert safety training on the proper use and inspection of rigging and overhead lifting equipment. Our company offers comprehensive programs at our national training centers as well as on-site at your facility. Courses include: Hoist Maintenance Crane & Hoist Inspection Crane Operator Training Safe Hoisting Load Securement Rigging Rigging Gear Inspection Win in the marketplace with CMCO University. This three-day program is designed to give Channel Partners intimate product and application knowledge that they can use to advise their end-user customers during the product selection and sales processes. Columbus McKinnon s corporate headquarters in Getzville, New York, is home to our state-of-the-art Niagara Training Center. The 3,000-square-foot facility is dedicated to training Channel Partners and end users on the safe and proper use of hoist and rigging products. The Center offers a one-of-a-kind training experience on chain and rigging equipment with more than 75 manual and powered hoists, enclosed track systems and our 50-foot-wide crane system with 3-ton Yale Global King wire rope hoist. USA 800.888.0985 716.689.5400 fax: 716.689.5644 CDN 877.264.6478 fax: 877.264.6477 www.cmworks.com 2016 Columbus McKinnon Corporation. All Rights Reserved. All marks listed are trademarks of Columbus McKinnon Corporation unless stated otherwise. Pulse is not a trademark of Columbus McKinnon Corporation. Stock # YLKB-1017 10/17 EP 1000 GK