Series EuroFlow Biological Safety Cabinets
Series EuroFlow Biological Safety Cabinets Clean Air provides a complete range Biological Safety Cabinets offering the highest personnel and/or product and. These state of the art cabinets have been designed in consultation with a variety of customers to incorporate user-friendly requirements and ergonomics. This has resulted in high quality reliable cabinets that comply with the highest standards for biological safety which have low noise-levels and are easy to operate. Biological Safety Cabinets Type EF/C EF EF/B EF/B TE (Total Exhaust) Size mm Safety According to Personnel, product and EN 12469 & NSF & AFNOR 1335/164/1945 Personnel, product and (4/5/6) EN 12469 & NSF & AFNOR 1335/1945 (4/6) Personnel, product and EN 12469 & DIN 12980 (2004/02) & NSF & AFNOR 1335/1945 (4/6) Personnel, product and NSF 49 B2 (ft.) 875 (2,5) Clean Air EuroFlow Biological Safety Cabinets are appreciated for their solid construction, while providing the highest safety and maximum convenience. These cabinets can be used for applications that require the highest protection and safety. Examples are applications assigned to bio-safety levels 1,2 or 3 and production of (cyto-toxic) medicines.
Features, Advantages and Technical Specifications Clean Air Series EuroFlow Biological Safety Cabinets Series EuroFlow Biological Safety Cabinets provide personnel, product, cross-contamination and. Certified in accordance with EN 12469 and DIN 12980 (2004-02) Series EuroFlow type EF and EF/B are tested and certified in accordance with EN 12469. Type EF/B is also tested and certified in accordance with DIN 12980 (2004-02). Type EF/B is in addition equipped with a V-shaped HEPA () filter section, mounted underneath the worktop. After passing the pre-filter section, all contaminated air will pass the V-shaped HEPA filters, therefore the inside of the cabinet remains free of contamination. These cabinets are often used for cyto-toxic or high risk microbiological applications. The V-shaped HEPA filters can be exchanged under safe conditions. V-shaped HEPA filters Cleaning and decontamination The working area of series EuroFlow is a monoconstruction, therefore seamless and easy to clean. For service applications it might be necessary to decontaminate the cabinet for example by using the Formalin Ammonium System FAS2000. The laminated safety glass window can be hermetically closed by a dedicated locking system, this allows gaseous disinfection. Ergonomics The ergonomic design of the cabinet guarantees an excellent working position. The integrated epoxy-coated armrest delivers a great contribution to comfort and safety. Optional series EuroFlow is equipped with an ergonomic designed support-frame with integrated footrest. The combined sliding and hinged window construction creates more space for loading / unloading and simplifies cleaning. Pre-filter and drip tray To increase the lifetime of the HEPA filters the cabinets have the option to install a large surface pre-filter, type G3, according EN 779 and integrated drip tray construction underneath the worktop (standard with type EF/B). Flexfront keypad Series EuroFlow is equipped with a state of the art flex front membrane keypad, which is directed to the user to optimise the view on the relevant functions and alarms.
Exhaust transition with timble connection To connect a Biological Safety cabinet to a duct system an exhaust transition, thimble connection and anti- blow back valve, is optional available. EuroFlow Total Exhaust For studies and applications that allow no recirculation and require 100% exhaust air we designed EuroFlow type EF/B TE. EuroFlow Compact For small scale applications, EF/C offers a safe and economical solution. Specials, projects and custom made adjustments. Besides the standard applications for Biological Safety Cabinets and Clean Benches our customers also have a need for unique products or adjustments to standard products. These could be small adjustments like incorporating a microscope or weighing system for accurate weighing of toxic/hazardous products to large custom made isolator systems for filling lines, compounding, mixing, dispensing and isotopes. Clean Air has an in-house expertise of project management and engineers in order to fulfill your requirements. Clean Air Superior Safety (C.A.S.S) Rigid Negative Pressure Design The durable fail-safe-filter-plenum is surrounded by negative pressure to prevent contaminated air to escape into the laboratory. All contaminated components are surrounded by negative pressure. This design enables fast and safe changing of each HEPA-filter separately via the front side of the cabinet. Electronic Flow Control For rapid, continues and accurate measuring of air velocity all series EuroFlow cabinets are equipped with heat wired electronic flow sensors. This ensures a superior safety of personnel and product protection due to the faster response time. Worktop with V-shaped air slits The stainless steel, single piece worktop with V-shaped air slits on the front, provides a superior safety compared to flat slits. Sleeves will be less contaminated and blocking of the inflow is almost impossible. Multi-shell construction Everlasting quality Robust design, cabinet constructed out of 1,5-2 mm epoxy coated steel or stainless steel. Factory testing Before shipment each Clean Air Biological Safety Cabinet is validated to ensure safety as well as compliance with standards and regulations (EN 12469). These tests include visual inspection, electrical safety, unit performance, HEPA filter efficiency, airflow patterns and volumetric airflow rates. The test certificate is supplied with each cabinet. 3 Year Warranty Protection Clean Air is confident in the quality delivered. Therefore we are able to back our Biological Safety Cabinets with a full three year warranty. Ask for our waranty conditions. Options and accessories Support-frame Pre-filter and drip tray construction (standard for type EF/B) Gas taps with electrical valve Taps for CO2-O2-N2-H2O and vacuum 230 V socket outlets UV Light with hour counter and timer Double exhaust HEPA filter kit Timble connection Exhaust transition Anti blow back valve Potential free contacts Disinfecting kit FAS2000 Bunsen burner sockets Electronic bunsen burners with foot switch IQ / OQ documents
Technical Specifications Clean Air Series EuroFlow Biological Safety Cabinets Type EF/C EF 4 Part no. (EC) P0301103 P0301104A Part no. (EC & SS workarea) P0301104AR Part no. (SS) P0301204A EF 5 P0301105A P0301105AR P0301205A EF 6 P0301106A P0301106AR P0301206A Exterior dimensions wxdxh (mm) 875x730x1380 1335x854x1552 Work area wxdxh (mm) 732x450x660 1190x580x700 Total height 900 2166 2300 Total height 800 2066 2200 Weight (kg) 70 255 Exhaust volume (m3/h) ±240 ±375 Exhaust transition, dia (mm) 200 250 Light intensity (lux) >800 >800 Noise level db(a) 57 57 Electrical connection 230V/50Hz/16A 230V/50Hz/16A 1660x845x1552 1495x580x700 2300 2200 275 ±500 250 >800 57 230V/50Hz/16A 1945x845x1552 1800x580x700 2300 2200 315 ±600 250 >800 57 230V/50Hz/16A Filter classification Pre-filter according to EN 779 G3 Downflow HEPA filter according to EN 1822 Exhaust HEPA filter V-shaped HEPA filter G3 G3 Standards according to EN 12469 Certified DIN 12980 NSF 49 AFNOR CE Directive 98/37/EC Certified Certified Electrcal safety EN 61010-01 EMC 89/336/EEC Type EF/B 4 EF/B 6 EF/B TE 4 EF/B TE 6 Part no. (EC) P0302104 P0302106 P0304304 P0304306 Part no. (EC & SS workarea) P0302104R P0302106R P0304304R P0304306R Part no. (SS) P0302204 P0302206 P0304404 P0304406 Exterior dimensions wxdxh (mm) 1335x854x1552 1945x845x1552 1335x854x1634 1335x854x1634 Work area wxdxh (mm) 1190x580x700 1800x580x700 1190x580x700 1800x580x700 Total height 900 2300 2300 2380 2380 Total height 800 2200 2200 2280 2280 Weight (kg) 300 380 285 345 Exhaust volume (m3/h) ±400 ±625 ±1315 ±2040 Exhaust transition, dia (mm) 250 250 315 355 Light intensity (lux) >800 >800 >800 >800 Noise level db(a) 58 58 57 57 Electrical connection 230V/50Hz/16A 230V/50Hz/16A 230V/50Hz/16A 230V/50Hz/16A Filter classification Pre-filter according to EN 779 G3 G3 G3 G3 Downflow HEPA filter according to EN 1822 Exhaust HEPA filter V-shaped HEPA filter Standards according to EN 12469 Certified Certified DIN 12980 Certified Certified NSF 49 AFNOR CE Directive 98/37/EC Electrcal safety EN 61010-01 EMC 89/336/EEC
Clean Air Techniek B.V. V1.0 ENG 07/05 Kuipersweg 37 3449 JA Woerden The Netherlands t +31 (0) 348 41 11 14 f +31 (0) 348 42 26 84 e info@cleanairbv.nl i www.cleanairbv.com Clean Air Techniek BV. All rights reserved. Specifications and terms are subject to change.