DOOR TECHNOLOGY Standard electric strike series No. 5
Standard electric strike series No. 5 The range to meet all requirements Gretsch-Unitas Group With its forward-thinking innovations, the Gretsch-Unitas Group has long been shaping the market and setting pioneering standards. Convenience and security are given the highest priority when it comes to opening and closing doors. Quality for over 100 years For more than a century and all around the world, our systems have been helping to prevent hazards, to reduce risks, to limit damage and to protect both people and property. Productivity and performance Our service portfolio comprises planning, implementation and service. Sophisticated mechanics and intelligent electronics are the perfect partners within this context. Especially our mechatronic products offer a multitude of new design options and extra user benefits. 2
Standard electric strike series No. 5 Table of contents Copyright notice All illustrations and texts in this published document are protected by copyright. Unless otherwise stated in the image credits, the rights belong to the Gretsch-Unitas Group. Any use of copyright protected materials without the consent of the holder of the rights is prohibited. Publisher Gretsch-Unitas GmbH Baubeschläge Johann-Maus-Str. 3 D-71254 Ditzingen Tel. + 49 (0) 71 56 3 01-0 Fax + 49 (0) 71 56 3 01-2 93 www.g-u.com Fitting the profile The customary and the new way...page 4 Technical design and performance features Coming to the point functions and features...page 6 Electric strike series No. 5 Designs...page 7 Technical data Coming to the point the technical details...page 8 Accessories Surface attachments...page 9 Profile systems made of plastic and metal Electric strikes and accessories to match the profile...page 10 3
Fitting the profile The customary way The customary way for installation in timber, PVC and aluminium profiles 1 Timber 1 Typical situation with customary electric strikes PVC As a rule, it is necessary to cut the profile edge to allow the standard electric strike keeper to pivot. This has considerable disadvantages: Appearance of profile is affected Reduced door tightness causing energy loss High installation effort Aluminium 4
Fitting the profile The modern way with electric strike series No. 5 The modern way for installation in timber, PVC and aluminium profiles Timber 2 PVC 2 The electric strike series No. 5 The compact design, the radius keeper, plus the extra benefit of a latch slide cover make it possible to accommodate the electric strike series No. 5 without having to cut the profile. The adjustable radius keeper enables the gasket pressure of the door to be adjusted in two steps so the door will always be shut tightly. Benefits of electric strike series No. 5 Appearance of profile remains unaffected Increased door tightness, reduced energy loss Little installation effort Aluminium 52.5 mm 52.5 mm Standard installation Concealed installation Retrofitting Thanks to its compact design and 52.5 mm screw centres, the electric strike series No. 5 can be retrofitted into existing profiles easily. 5
Technical design and performance features Coming to the point functions and features Colour scheme: blue = fail-secure red = fail-safe grey = dummy strike with mechanical override 52.5 mm distance between screw centres Dimensions Electric strike No. 5 Version K - with contact 52,5 Steel radius keeper 2 mm adjustable in 2 steps 72,5 Monitoring contact Performance features: Non-handed thanks to symmetrical design Small and compact size Width 16 mm, depth 28.4 mm, and height of merely 65.5 mm (72.5 mm with contact) 28,4 mm Radius keeper 2 mm adjustable in 2 steps Strikes with latch slide cover (version F) save the effort of cutting the front edge of the frame profile Tightness and appearance of the door are maintained Uninterrupted profile edge reduces energy losses 28,4 mm Voltage ranges Standard operating voltage 9-16 V AC / DC, + / - 15 % (duty ratio < 1 min) 12 V AC / DC version available, + / - 15 % (100 % duty ratio) Pole reversal-proof overvoltage protection thanks to bipolar TVS diode allowing the strikes to be connected with electronic control units (EMC protection) 72,5 mm 52,5 mm High break open resistance > 3500 N High preload unlocking at AC > 250 N Optimum compatibility with profiles Regardless of whether with aluminium, PVC or timber profiles The full range of requirements is covered by just a few versions Little storage space little capital commitment High availability / great delivery performance 16 mm 6
Electric strike series No. 5 Versions Electric strike No. 5 Designation A Operating current A R Fail-safe F Latch slide cover E Mechanical override K Contact ED Duty ratio Order no. 6-35804-01 A E < 1 min. 6-35804-02 A K 6-35804-03 A 6-35808-01 100 % A K 6-35808-03 R 6-35806-01 100 % R K 6-35806-03 E 6-35804-05 Electric strike No. 5 with latch slide cover Designation A Operating current A R Fail-safe F Latch slide cover F E Mechanical override K Contact ED Duty ratio Order no. 6-35805-01 A F E < 1 min. 6-35805-02 A F K 6-35805-03 A F 6-35809-01 100 % A F K 6-35809-03 R F 6-35807-01 100 % R F K 6-35807-03 F E 6-35805-05 blue terminal block red terminal block grey terminal block Fail-secure version A 12 V AC / DC (-25 % / + 33 %), vers. 100 % duty ratio ( +/- 15 %) Fail-safe version R 24 V DC 100 % duty ratio (+/- 15 %) Interchangeable latch piece with mechanical override 7
Technical data Coming to the point the technical details Technical data Electric strike No. 5 Material of housing zinc die cast Material of keeper zinc die cast Material variant F (with latch slide cover) steel Adjustment range 2 mm in 2 positions (each with 1 mm detent) Keeper radius keeper Break-open resistance 3500 N Operating temperature -15 C up to +40 C Flyback diode yes Pole reversal-proof yes Endurance rating 250 000 Door handing non-handed use Installation position vertical/horizontal Version K with microswitch with latch monitoring contact (potential-free changeover contact) Switching capacity of contact 30 V AC/DC 0.5 A Installation dimensions (H x W x D) 65.5 x 16 x 28.4 mm Installation dimensions (H x W x D) 72.5 x 16 x 28.4 mm Version K with microswitch Version for fire protection doors no Electrical specification of Strike No. 5 variant 'A' (fail-secure) Technical data Voltage Current Operating time Standard version: 12 V (9 16 V) AC/DC 12 V AC/DC -25 % / + 33 % 0.6 A < 1 min. Version 100 % duty ratio 12 V AC/DC +/- 15 % 0.28 A 100 % duty ratio Preload unlocking AC 250 N DC 40 N Standard nominal resistance 20 Ω Nominal resistance Version 100% duty ratio 42 Ω Electrical specification of Strike No. 5 variant 'R' (fail-safe) Technical data Voltage Current Operating time Operating voltage 24 V DC +/- 15 % 0.13 A 100 % duty ratio Preload unlocking No unlocking with preloaded latch Nominal resistance 192 Ω 8
Accessories Surface attachments Dim. X Overview Drawing Surface attachment Note Order no. Dim. X min. / max. fitted as standard without latch slide cover 7.1 to 9.1 mm fitted as standard with latch slide cover 7.1 to 9.1 mm + 1.5 mm gasket pressure for version without latch slide cover 9-46049-21-0-1 5.6 to 7.6 mm + 1.5 mm gasket pressure for version with latch slide cover 9-47318-21-0-1 5.6 to 7.6 mm 9
Profile systems made of PVC PVC profile systems GU-SECURY door locks Latch&deadbolt strikers Electric strikes Optional part prepared for electric strike with interchangeable latch piece GU series No. 5 / 6 Installation drawing Cover 9-45362-00-0-* Cover 9-45837-00-0-* Profile system Sash profile Frame profile Installation drawing GU- SECURY Backset / hole distance Faceplate ALUPLAST IDEAL 4000 140 033 140 003 0-44093 X 45/92 16 6-31660-1F-*-* 6-31661-1F-*-* 6-35***-** 0-45688 BRÜGMANN AD HP 1730 HP 1240 0-44090 X 35/92 16 6-31660-2L-*-* 6-31661-2L-*-* 6-35***-** 0-45689 DECEUNINCK ZENDOW 3049 3001 (0-43968) X 40/92 16 6-31660-34-*-* 6-31661-34-*-* 6-35***-** 0-45690 GEALAN S 7000 IQ 7076 7008 X 55/92 16 6-31660-4P-*-* 6-31661-4P-*-* 6-35***-** 0-45508 0-45691 GEALAN S 8000 IQ 8076 8011 X 55/92 16 6-31660-4P-*-* 6-31661-4P-*-* 6-35***-** INOUTIC PRESTIGE H 476 D L 676 D 0-44072 X 35/92 16 6-28890-79-*-* 6-28898-79-*-* 6-35***-** 0-45692 PROFINE EUROFUTUR CLASSIC 2416 2402 X 45/92 16 6-31660-31-*-* 6-31661-31-*-* 6-35***-** 0-45698 PROFINE KBE 70 378 370 X 50/92 16 6-31660-34-*-* 6-31661-34-*-* 6-35***-** PROFINE TROCAL 88+ 822 100 810 200 X 40/92 16 6-31941-00-*-* 6-31942-00-*-* 6-35***-** PROFINE TROCAL INNONOVA 0-45449 522 400 510 200 X 55/92 20 6-31941-00-*-* 6-31942-00-*-* 6-35***-** 2000 REHAU GENEO 532 135 532 305 X 35/92 16 6-31660-4W-*-* 6-31661-4W-*-* 6-35***-** REHAU BRILLANT DESIGN 550 160 550 680 X 45/92 16 6-31660-62-*-* 6-31661-62-*-* 6-35***-** SALAMANDER DESIGN 3D 211 240 110 220 0-44092 X 45/92 20 6-31660-2R-*-* 6-31661-2R-*-* 6-35***-** 0-45694 SCHÜCO CORONA CT 70 910 800 859 600 X 45/92 24 6-30995-00-*-* 6-35***-** 0-45695 VEKA SOFTLINE 13 AD 103 198 101 085 X 35/92 16 6-31660-2D-*-* 6-31661-2D-*-* 6-35***-** 0-45696 VEKA SOFTLINE 82 AD 105,380 101,294 X 50/92 24x6 6-35542-01-*-* 6-35***-** * Colours of optional cover: 6 = black 7 = white For a comprehensive overview of the profile systems with accessories visit: http://www.g-u.com/tuertechnik/elektro-tueroeffner.html 10
Profile systems Aluminium Metal profile systems GU-SECURY door locks Latch&deadbolt strikers Electric strikes Optional part prepared for electric strike with interchangeable latch piece GU series No. 5 / 6 Installation drawing Cover 9-45362-00-0-* Cover 9-45837-00-0-* Profile system Sash profile Frame profile Installation drawing GU- SECURY Backset / hole distance Faceplate Alumil M11500 X 33/92 24 6-29512-00-*-1 6-29513-00-*-1 6-35****-** Heroal 065 9381 9380 X 33/92 24x6 6-29512-00-*-1 6-29513-00-*-1 6-35****-** Hueck 1.0 521252 521150 X 40/92 24 6-29512-00-*-1 6-29513-00-*-1 6-35****-** Kawneer AA720 773475 773479 X 35/92 24x6 6-29506-00-*-1 6-29506-00-*-1 6-35****-** Klauke Series 77 inw. 77155 77060 X 40/92 24x6 6-35****-** SAPA-Ekonal E 65 38V12 38K82 X 35/92 24x6 6-35****-** Schüco ADS 65 HD 362080 395350 0-44852 X 35/92 24x6 6-29512-00-*-1 6-29513-00-*-1 6-35****-** Thyssen Schulte W 70 54 168 41 146 X 35/92 24 6-29512-00-*-1 6-29513-00-*-1 6-35****-** Wicona Wicstyle 65 1021003 1021001 X 35/92 24 6-29512-00-*-1 6-29513-00-*-1 6-35****-** = requires the use of electric strike version F (with latch slide cover) 11
Gretsch-Unitas GmbH Baubeschläge Johann-Maus-Str. 3 D-71254 Ditzingen Tel. + 49 (0) 71 56 3 01-0 Fax + 49 (0) 71 56 3 01-77 980 www.g-u.com BKS GmbH Heidestr. 71 D-42549 Velbert Tel. + 49 (0) 20 51 2 01-0 Fax + 49 (0) 20 51 2 01-97 33 WP00310-05-2-2 04/15 Printed in Germany