IR POWERED SPRYERS
POWROT SERIES PREMIUM IS STNDRD The durability, reliability, and ease of operation that you need are built in to each unit. Severe Service means twice the life with half the maintenance. Powroat Sprayers have been used throughout the world, providing their owners with dependable, efficient operation. SEVERE SERVIE PISTON PUMPS Features: Heavy-Duty Hose Wrap and Gun Holder Holds up to 2-feet of 1/2" hose. Fully djustable Lubricator Heavy-Duty rane Hook High-Efficiency nti-icing Motor irare System omplete FRL (Filter, Regulator, Lubricator) comes standard utomatic draining moisture trap Easy access air filter and lubrication reservoir Heavy-Duty Metal Shroud Protects FRL and air motor. High apacity Outlet Filter Reduces tip plugging. Integrated Wall Mount racket Large, 16" Pneumatic Tires Severe Service Pump Lift Handles Heavy-Duty art Mounting racket Severe Service Fluid Section Features self-adjusting packings. Severe Service Piston Rod and ylinder Titan exclusive hard-chrome plating is the hardest and slickest wear surface in the industry. High apacity Outlet Filter Features 3/8 and 1/4 outlets and easy-on/easy-off filter access. ir Filter, Moisture Separator, Regulator and Lubricator Included on all Powroat models. Heavy-Duty Frame Features large 16 pneumatic tires, convenient lift handles, heavyduty crane hook and high capacity hose rack that holds up to 2 feet of 1/2 hose. Severe Service Pump is Standard Powroat Piston Engineered to provide unmatched chemical and solvent resistance while creating an ultra-smooth surface that operates with a smooth stroke that provides less friction and wear. Easy-on, Easy-off, Full-Sized Filter Stainless Steel all heck Valve Tungsten arbide Valve Seats Provides maximum life and smooth, efficient operation with hardened stainless steel check balls. Self-djusting, Spring-Loaded Packings Sever Service, Hard hrome Piston and ylinder djustable all Guide lternate packing materials are available for specialized applications. (Models 73, 94, 145, 164 and 172) 2 IR POWERED titantool.com IR POWERED titantool.com 3
HOOSING THE RIGHT POWROT PUMP PERFORMNE URVES SPRYER FOR EVERY PPLITION We have Powroat models for virtually any application, including architectural, industrial maintenance, corrosion control, cold applied roofing, waterproofing and marine protective coatings. Each pump is designed for easy application of today s low-vo, high solids and abrasive coatings. nd our Severe Service fluid section is standard with self-adjusting packings. Pressures from 3 to 75 PSI (27 to 517 bar) Flow rates from 1.5 GPM (5.7 lpm) to 6. GPM (22.7 lpm) Powroat Technical Data 63 73 745 94 96 975 145 164 172 ir Motor Diameter (inches) 6 7 7 9 9 9 1 1 1 Ratio 3:1 3:1 45:1 4:1 6:1 75:1 45:1 64:1 72:1 Stroke Length (inches) 4. 4. 4. 4. 4. 4. 4.75 4.75 4.75 Max. Operating Pressure (PSI) 348 3 45 4 6 75 45 64 72 Max. ir Input Pressure (PSI) 116 1 1 1 1 1 1 1 1 Max. Volume Flow - 6 PM Max. Volume Flow - 9 PM Per Gallon of Output @ 1 PSI (6.9 bar).96 gal (3.6 l)/min 1.5 gal (5.5 l)/min 25. SFM (.71 m 3 /min) 2.8 gal (1.7 l)/min 4.2 gal (16. l)/min 28. SFM (.79 m 3 /min) 1.9 gal (7.3 l)/min 2.9 gal (1.9 l)/min 4. SFM (.79 m 3 /min) 2.8 gal (1.7 l)/min 4.2 gal (16. l)/min 36.4 SFM (1.3 m 3 /min) 1.9 gal (7.3 l)/min 2.9 gal (1.9 l)/min 53. SFM (1.5 m 3 /min) 1.5 gal (5.7 l)/min 2.3 gal (8.6 l)/min 67.9 SFM (1.92 m 3 /min) 4. gal (15.2 l)/min 6. gal (22.8 l)/min 43. SFM (1.22 m 3 /min) 3. gal (11.3 l)/min 4.7 gal (17.9 l)/min 57.7 SFM (1.63 m 3 /min) 2.7 gal (1. l)/min 4. gal (15.1 l)/min 64.9 SFM (1.84 m 3 /min) 4 112 148 145 148 142 172 174 175 Fluid Output Per ycle (cc) 61 182 114 182 114 95 254 188 167 53363 53373 533745 53394 53396 533975 533145 533164 533172 53373W 533745W 53394W 53396W 533975W Powroat 63 3,5 3, 2,5 2, 1,5 1, 12 9 6 3 5.2.4.6.8 1. 1.2 1.4 1.6 1.8 Powroat 73 3,5 3, 2,5 2, 1,5 1, 5 15 12 9 6 3 1. 2. 3. 4. 5. 6. ir Motor Diameter (inches) 6 Ratio 3:1 Stroke Length (inches) 4. Max. Operating Pressure (PSI) 348 Max. ir Input Pressure (PSI) 116 Per Gallon of Output @ 1 PSI (6.9 bar) 25. SFM (.71 m 3 /min) 4 Fluid Output Per ycle (cc) 61 53363 ir Motor Diameter (inches) 7 Ratio 3:1 Stroke Length (inches) 4. Max. Operating Pressure (PSI) 3 Max. ir Input Pressure (PSI) 1 Per Gallon of Output @ 1 PSI (6.9 bar) 28. SFM (.79 m 3 /min) 112 Fluid Output Per ycle (cc) 182 53373 53373W How to Use the Powroat Pump Performance urves alculating Fluid Outlet Pressure To calculate fluid pressure (PSI) at a specific fluid flow (GPM) and operating air pressure: 1. Locate the desired flow (GPM) along the bottom of the chart. 2. Move up vertically to the intersection of the selected outlet pressure curve. 3. Follow to the left scale to read the fluid outlet pressure. alculating Pump ir onsumption and ompressor Requirements To calculate pump air consumption (scfm) at a specific fluid flow (GPM) and operating air pressure: 1. Locate the desired flow (GPM) along the bottom of the chart. 2. Move up vertically to the intersection of the selected air consumption curve. 3. Follow to the right scale to read the air consumption. Powroat 745 5, 4,5 4, 3,5 3, 2,5 2, 1,5 1, 5.5 1. 1.5 2. 2.5 3. IR PRESSURE LEGEND: 1 PSI (7 bar,.7 MPa) 75 PSI (5 bar,.5 MPa) 5 PSI (3.5 bar,.35 MPa) 15 12 9 6 3 ir Motor Diameter (inches) 7 Ratio 45:1 Stroke Length (inches) 4. Max. Operating Pressure (PSI) 45 Max. ir Input Pressure (PSI) 1 Per Gallon of Output @ 1 PSI (6.9 bar) 4. SFM (.79 m 3 /min) 148 Fluid Output Per ycle (cc) 114 533745 533745W 4 IR POWERED titantool.com IR POWERED titantool.com 5
PUMP PERFORMNE URVES PUMP PERFORMNE URVES Powroat 94 4,5 4, 3,5 3, 2,5 2, 1,5 1, 15 12 9 6 3 5.5 1. 1.5 2. 2.5 3. 3.5 4. ir Motor Diameter (inches) 9 Ratio 4:1 Stroke Length (inches) 4. Max. Operating Pressure (PSI) 4 Max. ir Input Pressure (PSI) 1 Per Gallon of Output @ 1 PSI (6.9 bar) 36.4 SFM (1.3 m 3 /min) 145 Fluid Output Per ycle (cc) 182 53394 53394W Powroat 145 5, 4,5 4, 3,5 3, 2,5 2, 1,5 1, 5 4 35 3 25 2 15 1 5 1. 2. 3. 4. 5. 6. 7. 8. 9. 1. ir Motor Diameter (inches) 1 Ratio 45:1 Stroke Length (inches) 4.75 Max. Operating Pressure (PSI) 45 Max. ir Input Pressure (PSI) 1 Per Gallon of Output @ 1 PSI (6.9 bar) 43. SFM (1.22 m 3 /min) 172 Fluid Output Per ycle (cc) 254 533145 Powroat 96 7, 15 ir Motor Diameter (inches) 9 Powroat 164 7, 35 ir Motor Diameter (inches) 1 6, 5, 4, 3, 2, 1, 12 9 6 3.5 1. 1.5 2. 2.5 Ratio 6:1 Stroke Length (inches) 4. Max. Operating Pressure (PSI) 6 Max. ir Input Pressure (PSI) 1 Per Gallon of Output @ 1 PSI (6.9 bar) 53. SFM (1.5 m 3 /min) 148 Fluid Output Per ycle (cc) 114 53396 53396W 6, 5, 4, 3, 2, 1, 3 25 2 15 1 5 1. 2. 3. 4. 5. 6. 7. 8. 9. Ratio 64:1 Stroke Length (inches) 4.75 Max. Operating Pressure (PSI) 64 Max. ir Input Pressure (PSI) 1 Per Gallon of Output @ 1 PSI (6.9 bar) 57.7 SFM (1.63 m 3 /min) 174 Fluid Output Per ycle (cc) 188 533164 Powroat 975 8, 7, 6, 5, 4, 3, 15 12 9 6 2, 3 1,.5 1. 1.5 2. 2.5 3. ir Motor Diameter (inches) 9 Ratio 75:1 Stroke Length (inches) 4. Max. Operating Pressure (PSI) 75 Max. ir Input Pressure (PSI) 1 Per Gallon of Output @ 1 PSI (6.9 bar) 67.9 SFM (1.92 m 3 /min) 142 Fluid Output Per ycle (cc) 95 533975 533975W Powroat 172 8, 7, 6, 5, 4, 3, 2, 1, 4 35 3 25 2 15 1 5 1. 2. 3. 4. 5. 6. 7. 8. ir Motor Diameter (inches) 1 Ratio 72:1 Stroke Length (inches) 4.75 Max. Operating Pressure (PSI) 72 Max. ir Input Pressure (PSI) 1 Per Gallon of Output @ 1 PSI (6.9 bar) 64.9 SFM (1.84 m 3 /min) 175 Fluid Output Per ycle (cc) 167 533172 IR PRESSURE LEGEND: 1 PSI (7 bar,.7 MPa) 75 PSI (5 bar,.5 MPa) 5 PSI (3.5 bar,.35 MPa) IR PRESSURE LEGEND: 1 PSI (7 bar,.7 MPa) 75 PSI (5 bar,.5 MPa) 5 PSI (3.5 bar,.35 MPa) 6 IR POWERED titantool.com IR POWERED titantool.com 7
LUMINUM IRLESS GUNS STINLESS STEEL ND SPEILTY IRLESS GUNS THE INDUSTRY LEDER IN SPRY GUN TEHNOLOGY ountless hours of research and development have been devoted to manufacturing a full line of the best quality Titan airless guns for every application imaginable from the thinnest lacquers to the heaviest architectural and commercial grade coatings. RX-PRO IRLESS SPRY GUN The new RX-Pro airless spray gun redefines spraying with unmatched comfort and durability including on-board tools like the built-in filter wrench that really make an impact. S-3 irless Gun In-handle filter Easy 4-finger trigger pull 1/4" swivel reduces hose kinks Pressure rated at 39 PSI (26.9 MPa) S-3 Gun with TR 1 Tip 556 S-3 Gun, Hose and Tip Kit 5565 S-3 Repair Kit 55-275 S-5 irless Gun Stainless steel fluid passages Front feed, filter-less design for heavy coatings Easy 2-finger trigger pull Pressure rated at 5 PSI (34.5 MPa) S-3 / S-7 irless Gun S-5 Gun with TR 1 Tip 557 S-5 Gun, Hose and Tip Kit 5575 Infinity Packing 2X the gun life by reversing the seat and changing the ball. FingerPrint Grip ustomize the grip to comfortably fit any painters hand. Ultra-Light Trigger 3% lighter than the competitors trigger pull decreasing fatigue. Onboard Tools Smart tools that make jobsite life easier. S-5 Repair Kit 52-25 S-7 irless Gun In-handle filter omes standard with both 2 and 4-finger triggers Pressure rated at 36 PSI (24.8 MPa) RX-Pro irless Gun with TR 1 Tip 5382 RX-Pro Gun, Hose and Tip Kit 53822 vailable in two swivel sizes Easy 4-finger trigger pull Swivel reduces hose kinks Includes 517 TR 1 high pressure, heavy-duty reversible tip Pressure rated at 77 PSI (53.1 MPa) S-5 irless Gun Includes additional a 3' whip hose. S-7 Gun with 1/4" Swivel 55-26 LX-8 II irless Gun S-7 Gun with 3/8" Swivel 55-27 S-7 Repair Kit 55-276 The LX-8 II airless gun features all-metal construction and is available in either 4 or 2-finger trigger. The Tungsten arbide ball valve and seat will ensure long life and durability. M-4 and M-8 Mastic Guns Straight line fluid passage allows max flow rate In-handle filter reduces clogging and increases tip life Swivel reduces hose kinks and assures effortless control Pressure rated at 36 PSI (24.8 MPa) ngled handle for increased comfort djustable needle packing prolongs the life of critical wear parts Swivel allows freedom of movement without hose kinking Lightweight metal construction M-4 / M-8 irless Gun LX-8 II 4-Finger Gun with S-6+ Tip 58-1 PSI LX-8 II 4-Finger Gun with TR 1 Tip 553 M-4 Mastic Gun 36 28913 LX-8 II 4-Finger Gun with TR 2 Tip 58-5 M-8 Mastic Gun 77 28914 LX-8 II 2-Finger Gun with TR 1 Tip 554 LX-8 II 4-Finger Gun, Hose and TR 1 Tip Kit 5535 LX-8 II 2-Finger Gun, Hose and TR 1 Tip Kit 5545 LX-8 II Repair Kit 58-34 8 IR POWERED titantool.com IR POWERED titantool.com 9
TR 1 High Pressure Tips 696-XXX FN PTTERN WIDTH IRLESS TIP TEHNOLOGY HIGHER QULITY ETTER PERFORMNE Titan s new high pressure TR 1 tips are built to provide the finish and performance to exceed contractor expectations and increase profit. The Industry s est Performing Fan Pattern onsistent fan pattern width from the first gallon to the last Longest Lasting High Pressure Tip in the Market Sprays a uniform paint thickness for the life of the tip Less wasted paint equals more profit ORIFIE SIZE (INHES) INHES MM.7.9.11.13.15.17.19.21.23.25.27.29.31.33.35.37.39.41.43.45.51.55.61 2 4 51 12 17 19 111 113 115 117 119 4 6 12 152 27 29 211 213 215 217 219 221 223 225 227 6 8 152 23 37 39 311 313 315 317 319 321 323 325 327 329 331 333 335 337 339 361 8 1 23 254 49 411 413 415 417 419 421 423 425 427 429 431 433 435 437 439 443 445 451 455 1 12 254 35 59 511 513 515 517 519 521 523 525 527 529 531 533 535 537 539 543 545 551 555 12 14 35 356 69 611 613 615 617 619 621 623 625 627 629 631 633 635 637 639 641 643 645 651 655 14 16 356 46 711 713 715 717 719 721 723 725 727 731 733 735 16 18 46 457 813 815 817 819 821 823 825 827 829 831 835 837 839 18 2 457 58 923 925 927 931 937 Flow (GPM) ---.5.9.13.18.24.31.39.47.57.67.78.91 1.3 1.17 1.32 1.4 1.64 1.81 1.99 2.18 2.91 3.26 4.14 Flow (LPM) ---.19.34.45.68.91 1.17 1.47 1.78 2.15 2.53 2.95 3.44 3.89 4.42 4.99 5.29 6.2 7.18 7.52 8.24 11. 12.32 15.65 Maximum Working Pressure: 77 PSI (53.1 MPa) Tip Guards High Pressure Tip Guard (7/8") 661-27 Interchangeable with most industry spray guns Pressure rated at 77 PSI (53 MPa) No uild Tip Guard (7/8") 289228 Interchangeable with most industry spray guns Pressure rated at 5 PSI (34.5 MPa) PREMIUM TR 1 REVERSILE TIP TR 1 Tips 695-XXX FN PTTERN WIDTH The best overall performing tip in the industry Fan pattern stays wider longer n orifice that outlasts competitive tips delivering consistent film thickness and less wasted paint Fits all Titan and most other industry spray gun guards ORIFIE SIZE (INHES) INHES MM.9.11.13.15.17.19.21.25.27 2 4 51 12 4 6 12 152 29 211 213 215 217 6 8 152 23 311 313 315 317 8 1 23 254 411 413 415 417 1 12 254 35 513 515 517 519 521 525 12 14 35 356 627 Flow (GPM) ---.9.12.18.24.31.39.47.67.78 Flow (LPM) ---.34.45.68.91 1.17 1.47 1.78 2.53 2.95 Maximum Working Pressure: 5 PSI (34.5 MPa) HIGH QULITY S-6+ REVERSILE TIP S-6+ Tips 662-XXX FN PTTERN WIDTH The industry s longest lasting orifice Up to 22% wider fan pattern Fits all Titan and most industry standard guards Fan pattern width IRLESS TIP TEHNOLOGY Proven Results in a 1 Gallon Test Titan TR 1 Tip vs. The ompetitor s Premium Tip Titan TR1 Spray-out Test 5 15 25 5 1 Gallons Fan pattern width Titan s TR 1 tip has a consistently wide fan pattern and an orifice that outlasts the competition making it the best performing tip in the industry. ORIFIE WIDTH (INHES) ompetition Spray-out Test 5 15 25 5 1 Gallons Fan pattern does not stay wide as long as the TR 1. INHES MM.7.9.11.13.15.17.19.21.23.25.27.29.31.33.35.39.43.45.51.55 2 4 51 12 17 19 111 113 115 117 4 6 12 152 27 29 211 213 215 217 219 221 223 225 227 229 231 233 235 6 8 152 23 37 39 311 313 315 317 319 321 323 325 327 329 331 333 335 8 1 23 254 47 49 411 413 415 417 419 421 423 425 427 429 431 433 435 439 443 445 451 455 1 12 254 35 59 511 513 515 517 519 521 523 525 527 529 531 533 535 539 543 545 551 555 12 14 35 356 69 611 613 615 617 619 621 623 625 627 629 631 633 635 639 643 645 651 655 14 16 356 46 719 721 731 735 16 18 46 457 821 831 Flow (GPM) ---.5.9.12.18.24.31.39.47.57.67.78.91 1.3 1.17 1.32 1.64 1.99 2.18 2.8 3.26 Flow (LPM) ---.19.34.45.68.91 1.17 1.47 1.78 2.15 2.53 2.95 3.44 3.89 4.42 4.99 6.2 7.52 8.24 1.58 12.32 Maximum Working Pressure: 5 PSI (34.5 MPa) TITN TIPS PINT MORE Titan Tips Vs. the ompetition Long-lasting orifice gives you more usable tip life, spraying a consistent film thickness and wasting less paint. 1 Gallons sprayed with a Titan S-6+ tip 1 Gallons sprayed with the competitor s standard tip ssumes consistent application method TR 1 Tip S-6+ Tip 1 IR POWERED titantool.com IR POWERED titantool.com 11
IRLESS HOSES IRLESS ESSORIES THE RIGHT EQUIPMENT FOR THE JO. ouplings HOSE TO HOSE 1/4" NPS(M) x 1/4" NPS(M) 545 1/4" NPT(M) x 3/8" NPS(M) 812-3 3/8" NPS(M) x 3/8" NPS(M) 49-14 Gun and Pump Filters Titan s unthreaded filters are designed for quick and easy replacement. For use with RX-Pro, G-1, LX-3, LX-4, LX-5, LX-7, S-3 and S-7. luminum Gun Extensions High Quality irless Fluid Hoses and Whip Hoses MX. WORKING PRESSURE - PSI (MPa) LENGTH 33 (22.8) 36 (24.8) 45 (31.) 65 (44.8) 75 (51.7) I.D. FEET METERS END ONNETION 1/8" 3.9 --- --- 29685 --- --- 1/4" NPSM (F/M) 3.9 55-24 --- --- --- --- 1/4" NPSM (F/M) 5 1.5 316-56 --- --- --- --- 1/4" NPSM (F/M) 3/16" 9 2.7 55-222 --- --- --- --- 1/4" NPSM (F/M) 25 7.6 2917 --- --- --- --- 1/4" NPSM (FE) 5 15.2 2918 --- --- --- --- 1/4" NPSM (FE) 3.9 --- --- 25453 25653 25753 1/4" NPSM (FE) 6 1.8 316-533 --- 25456 25656 25756 1/4" NPSM (FE) 1/4" 6 1.8 55-227 --- --- --- --- 1/4" NPSM (F/M) 25 7.6 316-513 --- --- --- --- 1/4" NPSM (FE) 5 15.2 316-55 286498 25455 25655 25755 1/4" NPSM (FE) 1 3.5 --- --- 25451 25651 25751 1/4" NPSM (FE) 3.9 --- --- 375453 375653 375753 3/8" NPSM (FE) 6 1.8 --- --- 375456 375656 375756 3/8" NPSM (FE) 3/8" 25 7.6 58342 --- --- --- --- 3/8" NPSM (FE) 5 15.2 69-375-5 286499 375455 375655 375755 3/8" NPSM (FE) 1 3.5 --- --- 375451 375651 375751 3/8" NPSM (FE) 1/2" NPT(M) x 1/2" NPS(M) 449-621 Maximum Working Pressure: 5 PSI (34.5 MPa) HIGH PRESSURE HOSE TO HOSE 1/4" NPTF(M) x 1/4" NPTF(M) 9885642 3/8" NPTF(M) x 3/8" NPTF(M) 9885643 1/2" NPTF(M) x 1/4" NPTF(M) 9885644 3/4" NPTF(M) x 1/2" NPTF(M) 9885645 3/8" NPTF(M) x 1/4" NPTF(M) 9885646 1/2" NPTF(M) x 3/8" NPTF(M) 9885647 1/2" NPTF(M) x 1/2" NPTF(M) 9885648 Maximum Working Pressure: 75 PSI (51.7 MPa) ouplings Swivel Unions Swivel Unions UNTHREDED FILTERS ULK 2-PK oarse (Green) 581-59 89957 Medium (White) 581-6 89958 Fine (Yellow) 581-62 89959 Extra Fine (Red) 581-61 8996 Manifold filter for dvantage 4. For use with LX-8 II and LX-8 Platinum. THREDED FILTERS ULK 2-PK oarse (Green) 54-3 5-2-3 Medium (White) 54-6 5-2-6 Fine (Yellow) 54-1 5-2-1 Extra Fine (Red) 54-15 5-2-15 Stainless Steel Gun Extensions luminum Gun Extensions Our aluminum gun extensions are lightweight and easy to handle and can be used with most brands of airless spray guns. Pressure rated at 36 PSI (24.8 MPa) 7/8" x 14 Thread is Standard 6" (15 cm) 651-7 12" (3 cm) 651-71 18" (45 cm) 651-72 24" (6 cm) 651-73 1/2" Textile raid. Spring guards at both ends. 25 7.6 225-112 --- --- --- --- 1/2" NPSM (FE) 5 15.2 25-112 --- 5455 5655 5755 1/2" NPSM (FE) 1 3.5 --- --- 5451 5651 5751 1/2" NPSM (FE) FE Female oth Ends, NPT National Pipe Tapered Thread, ME Male oth Ends, NPSM National Pipe Straight Mechanical Thread, F/M 1 Female / 1 Male onnection It s now easy to find the proper high pressure hose. High Pressure irless Hoses Our new high pressure hoses are color-coded by pressure rating, making it easier to organize, identify and purchase. First 3 digits indicate fitting or thread size, next 4 digits indicate max. PSI rating, last 2 digits indicate length. I.D. FIRST 3 PRESSURE NEXT 4 LENGTH LST 2 1/4" 25 45 45 3 3 3/8" 375 65 65 6 6 1/2" 5 75 75 5 5 25 45 5 Example: ¼" X 5' 45 PSI hose will be P/N 25455 Transfer Pumps 1:1 and 2:1 55 gallon ung Mount Fits 5 gallon drums No drum tipping in trailers 6' 7" and taller 1:1 Stainless Steel 138762 2:1 Stainless Steel 13876 1/4" NPS(F) x 1/4" NPT(M) 49-5 3/8" NPS(F) x 1/4" NPT(M) 49-42 1/4" NPS(F) x 3/8" NPT(M) 49-32 3/8" NPS(F) x 3/8" NPT(M) 49-43 1/2" NPS(F) x 1/2" NPT(M) 2-555 3/4" NPS(F) x 3/4" NPT(M) 138-37 1" NPS(F) x 1" NPT(M) 2-556 Maximum Working Pressure: 5 PSI (34.5 MPa) Swivel Fittings 1/4" NPS(F) x 1/4" NPS(F) 5-428 1/4" NPS(M) x 1/4" NPS(M) 5-424 Maximum Working Pressure: 5 PSI (34.5 MPa) Liquids MESH irare 1 Qt. ottle 311-11 Piston Lube 1 Qt. ottle 7-926 Liquid Shield Plus 1 Qt. ottle 314-482 Manifold filter for 44i and Impact 4. Pump Manifold Filters For use on all Powroat models. MESH oarse-5 Mesh 92-1 Medium-5 Mesh 92-4 Fine-1 Mesh 92-5 High Pressure, Stainless Steel Gun Extensions When you need something a little more heavy duty. an be used with most brands of airless spray guns. Pressure rated at 77 PSI (53.1 MPa). 7/8" x 14 Thread is Standard 6" (15 cm) 611-28 12" (3 cm) 611-281 18" (45 cm) 611-282 24" (6 cm) 611-283 High Pressure all Valve FITTING SIZE PSI MPa 1/4" 6 41.4 533358 1/4" 75 51.7 533348 3/8" 6 41.4 533359 Part Renu Starter Kit 5211 Part Renu 1 Gallon Refill ottle 521423 Standard with sprayer, excludes ball. all check sold separately (92-13). 3/8" 75 51.7 533347 12 IR POWERED titantool.com IR POWERED titantool.com 13
TIRELESS WORKHORSES Powroat 63 Powroat 73 Powroat 745 Powroat 94 Model Number (art) 53363 53373 533745 53394 Model Number (Wall) 53363W 53373W 533745W 53394W Pressure Ratio 3:1 3:1 45:1 4:1 Max. Operating Pressure 348 PSI (24 bar) 3 PSI (27 bar) 45 PSI (31 bar) 4 PSI (276 bar) Max. ir Inlet Pressure 116 PSI (8 bar) 1 PSI (6.9 bar) 1 PSI (6.9 bar) 1 PSI (6.9 bar) ycle Rate (Per Gallon/Liter) 63 / 16 21.2 / 5.6 31.1 / 8.2 21.2 / 5.6 Volume (Per Double Stroke) 6.8 cc 178.3 cc 121.6 cc 178.3 cc Maximum Volume Flow @ ycles Per Minute (PM) 6 PM.96 gal (3.6 l)/min 2.8 gal (1.7 l)/min 1.9 gal (7.3 l)/min 2.8 gal (1.7 l)/min 9 PM 1.5 gal (5.5 l)/min 4.2 gal (16. l)/min 2.9 gal (1.9 l)/min 4.2 gal (16. l)/min Fluid and ir Specifications Inlet 3/4" NPT(F) 1" NPT(F) 1" NPT(F) 1" NPT(F) Outlet 3/8" NPT(F) 1/2" NPT(F) 1/2" NPT(F) 1/2" NPT(F) Hose onnection 1/4" NPSM(M) 3/8" NPSM(M) 3/8" NPSM(M) 3/8" NPSM(M) Per Gallon of Output @ 1 PSI (6.9 bar) 25 SFM (.71m 3 /min) 28 SFM (.79m 3 /min) 4 SFM (1.13m 3 /min) 36.4 SFM (1.3m 3 /min) ir Inlet 3/8" NPT(M) 3/4" NPT(M) 3/4" NPT(M) 3/4" NPT(M) Max. Sound Pressure Level 98 d 16 d 16 d 16 d Max. Temperature 14º F (6º ) 14º F (6º ) 14º F (6º ) 14º F (6º ) Filter Insert (Standard) 6-Mesh, 97 cm 2 (15 in 2 ) 5-Mesh (18 in 2 ) 5 mesh (18 in 2 ) 5-Mesh (18 in 2 ) Weight art 9 lbs (41 kg) 132 lbs (59.9 kg) 133 lbs (6.3 kg) 14 lbs (63.5 kg) Wall 64 lbs (29 kg) 92 lbs (41.7 kg) 93 lbs (42.2 kg) 1 lbs (45.3 kg) Dimensions (L x W x D) Powroat 96 Powroat 975 Powroat 145 Powroat 164 Powroat 172 53396 533975 533145 533164 533164 53396W 533975W 533145W 533164W 533172W 6:1 75:1 45:1 64:1 72:1 6 PSI (414 bar) 75 PSI (517 bar) 45 PSI (31 bar) 64 PSI (441 bar) 72 PSI (496 bar) 1 PSI (6.9 bar) 1 PSI (6.9 bar) 1 PSI (6.9 bar) 1 PSI (6.9 bar) 1 PSI (6.9 bar) 31.1 / 8.2 39.6 / 1.5 15 / 3.9 2 / 5.3 22.5 / 5.9 121.6 cc 95.5 cc 253.8 cc 188.5 cc 167.1 cc Maximum Volume Flow @ ycles Per Minute (PM) 1.9 gal (7.3 l)/min 1.5 gal (5.7 l)/min 4. gal (15.2 l)/min 3. gal (11.3 l)/min 2.7 gal (1. l)/min 2.9 gal (1.9 l)/min 2.3 gal (8.6 l)/min 6. gal (22.8 l)/min 4.7 gal (17.9 l)/min 4. gal (15.1 l)/min Fluid and ir Specifications 1" NPT(F) 1" NPT(F) 3/4" NPT(F) 3/4" NPT(F) 3/4" NPT(F) 1/2" NPT(F) 1/2" NPT(F) 3/4" NPT(F) 3/4" NPT(F) 3/4" NPT(F) 3/8" NPSM(M) 3/8" NPSM(M) 3/8" NPSM(M) 3/8" NPSM(M) 3/8" NPSM(M) 53 SFM (1.5m 3 /min) 67.9 SFM (1.92m 3 /min) 43 SFM (1.22m 3 /min) 57.7 SFM (1.63m 3 /min) 64.9 SFM (1.84m 3 /min) 3/4" NPT(M) 3/4" NPT(M) 3/4" NPT(M) 3/4" NPT(M) 3/4" NPT(M) 12 d 14 d 98 d 98 d 98 d 14º F (6º ) 14º F (6º ) 16º F (71º ) 16º F (71º ) 16º F (71º ) 5-Mesh (18 in 2 ) 5-Mesh (18 in 2 ) 6-Mesh, 97 cm 2 (15 in 2 ) 6-Mesh, 97 cm 2 (15 in 2 ) 6-Mesh, 97 cm 2 (15 in 2 ) Weight 139 lbs (63 kg) 135 lbs (61.2 kg) 195 lbs (88.4 kg) 195 lbs (88.4 kg) 195 lbs (88.4 kg) 98 lbs (44.4 kg) 95 lbs (43.1 kg) 154 lbs (69.8 kg) 154 lbs (69.8 kg) 154 lbs (69.8 kg) Dimensions (L x W x D) art 19.75 x 18.5 x 4" (5.16 x 47 x 11.6 cm) 33.5 x 31.35 x 539.9" (85.9 x 79.63 x 136.9 cm) 33.5 x 31.35 x 539.9" (85.9 x 79.63 x 136.9 cm) 33.5 x 31.35 x 539.9" (85.9 x 79.63 x 136.9 cm) Wall 14.5 x 12 x 34.5" (36.8 x 3.5 x 87.6 cm) (48.9 x 34.3 x 15.4 cm) (48.9 x 34.3 x 15.4 cm) (48.9 x 34.3 x 15.4 cm) (48.9 x 34.3 x 15.4 cm) (48.9 x 34.3 x 15.4 cm) 19.3 x 16.8 x 46.76" (49.2 x 4.84 x 118.77 cm) 19.3 x 16.8 x 46.76" (49.2 x 4.84 x 118.77 cm) 19.3 x 16.8 x 46.76" (49.2 x 4.84 x 118.77 cm) Repair Parts 55-Gallon Siphon Set 533248 13-826 13-826 13-826 Packing Kit 533934 185-5 185-51 185-5 Piston Rod 53369 185-984 155-982 185-984 ylinder 53368 183-93 155-932 183-93 Repair Parts 13-826 13-826 533259 533259 533259 185-51 155-55 533936 533937 533938 155-982 138-917 533677 533689 533939 155-932 14-922 533676 533688 533699 14 IR POWERED titantool.com IR POWERED titantool.com 15
ONVENIENE PROGRM KEEP ON WORKING SPRE FLUID SETION KEEPS YOU ON THE JO. Not only do we deliver high quality sprayers, we are proud to back them up with the best and longest warranty in the industry. Titan sprayers are built to last. We are so confident that our sprayers will hold up to the most difficult jobs that we offer the best and longest warranty in the industry. 4-Year Manufacturer s Defect We pledge that our sprayers are free from defects in materials and workmanship. This excludes normal wear items and consumables such as filters, piston, packings, tips, etc. Lifetime DuraLife rushless HE and PMD rushless Motor Warranty If the motor fails for any reason (including wear) for as long as you own the sprayer, we will replace the motor at no cost to you. Limited Lifetime DX Motor Warranty If the motor fails from normal usage for as long as you own the sprayer, we will replace the motor at no cost to you. Gas Engine Warranty 5 year Subaru, 3 year Honda and 2 years all others. 2-Year Turbine Warranty Lifetime Drive Train Warranty If the drive train fails from normal usage for as long as you own the sprayer, we will replace the drive train at no cost to you. 35-Day Satisfaction Guarantee If for any reason the sprayer does not perform up to your expectations within 35 days, the sprayer can be exchanged for the identical model or full credit towards the purchase of a Titan sprayer of larger size and value. Express Parts Program Over 65 uthorized Service enters nationwide The most common repair parts are guaranteed to be in stock 1% of the time If for any reason your preferred uthorized Service enter is out of stock, free 2nd day air is available when ordered by 3: pm (EST) 1 2 3 4 5 6 Get up to 8% OFF a spare fluid section or choose to get a FREE REPKING KIT. Impact 34, 4 Impact 44, 54, 64, 74, 84; MF 44; GPX 85; PowrLiner 285 Impact 14, 114; GPX 13 GPX 165, 22; PowrTwin 49 Plus, 69 Plus, 89 Plus, 12 Plus; PowrLiner 4955, 6955, 8955, 12 SF iroat 423, 62; Powroat 63 Powroat 73, 745, 94, 96, 975, 145, 164, 172; Hydra Pro IV THE IMPT 44, 54 and 64 FLUID SETIONS INLUDE 375 in DDED FETURES MNIFOLD FILTER HOUSING PRESSURE TRNSDUER SUREFLO PUSHER VLVE PRIME SPRY VLVE The Impact 44, 54 and 64 convenience program fluid section comes packed with features that the competition cannot offer. Tax not included. Prices guaranteed through January 31, 217. 19 95 (149.8 D) 224 95 (35.2 D) 249 95 (338.92 D) 324 95 (44.61 D) 399 95 (542.31 D) 599 95 (813.49 D) 6/16 SL4317 J7525E Plug into TitanPowerHouse.com all Technical Services at 1-8-526-5362 for complete warranty information. ll information contained in this brochure is based on the latest information available at the time of printing. Titan reserves the right to make changes at any time, without notice. Due to continuous innovation, specifications may progressively change. ontact one of our dependable sales reps or call our dedicated customer service team for more information. Titan Tool 177 Fernbrook Lane Minneapolis, MN 55447 8-526-5362 Phone 8-528-4826 Fax titantool.com