Medical MEDICL GS OUTLETS DIN 13260-2 BS 5682:2015 SS 875 24 30 FNOR NF S 90-116 / FD S 90-119 S 2896 JIS T 7101 UNI 9507 ENV 737-6 EN 15908 SDEG EN ISO 9170-2 IR MOTOR
SUMMRY outlets OR range 6 Base block 8 Socket 16 Plastic box 30 Our ideas our strength. fast information and order management and flexibility of production, are the basis of our service. outlets UNI 9507 and FNOR NFS 90-116 32 Base block 34 Socket 36 Plastic box 39 NIST connectors (NIST) 40 naesthetic Scavenging System (GSS) and ir Motor 44 dapters for ambulances 52 Flow-meter 59 Flexible hoses for medical gas 66 5
outlets OR range The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. n incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards so to grant a non-interchangeability among different gases and prevent from any possible mistake. The OR range socket can be fixed to the base block in only one position. The profile of the installed socket is always in the correct position. 7
NEWS 2016 Brass/zamac base block c/w vertical copper pipe ØB Ø B ZRMOR08-T-O 36 8 OXYGEN ZRMOR08-T-V 36 8 VCUUM ZRMOR08-T-4 36 8 IR ZRMOR08-T-P 36 8 Nitrous oxide ZRMOR08-T-8 36 8 IR-800 ZRMOR08-T-C 36 8 Carbon dioxide ZRMOR08-T-N 36 8 Nitrogen C/w plug for test. 45 Base block OR range This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed complying with the standard EN ISO 9170-1 for design and manufacture requirements. ll base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed. Materials: Brass EN 12164 - CuZn39Pb3 NBR/EPDM ISI Brass/zamac base block c/w vertical copper pipe Ø B ZRMOR10-T-O 36 10 OXYGEN ZRMOR10-T-V 36 10 VCUUM ZRMOR10-T-4 36 10 IR ZRMOR10-T-P 36 10 Nitrous oxide ZRMOR10-T-8 36 10 IR-800 ZRMOR10-T-C 36 10 Carbon dioxide ZRMOR10-T-N 36 10 Nitrogen C/w plug for test. ØB 45 9
45 Brass/zamac base block c/w 45 copper pipe Brass/zamac base block c/w 135 copper pipe 45 Ø B Ø B ØB zarmorz08-45t-o 36 8 OXYGEN zarmorz08-45t-v 36 8 VCUUM zarmorz08-45t-4 36 8 IR zarmorz08-45t-p 36 8 Nitrous oxide zarmorz08-45t-8 36 8 IR-800 ZRMORZ10-135T-O 36 10 OXYGEN ZRMORZ10-135T-V 36 10 VCUUM ZRMORZ10-135T-4 36 10 IR ZRMORZ10-135T-P 36 10 Nitrous oxide ZRMORZ10-135T-8 36 10 IR-800 zarmorz08-45t-c 36 8 Carbon dioxide ZRMORZ10-135T-C 36 10 Carbon dioxide 135 ØB 45 zarmorz08-45t-n 36 8 Nitrogen C/w plug for test. ZRMORZ10-135T-N 36 10 Nitrogen C/w plug for test. 45 Brass/zamac base block c/w 45 copper pipe Ø B ØB zarmorz10-45t-o 36 10 OXYGEN zarmorz10-45t-v 36 10 VCUUM 45 zarmorz10-45t-4 36 10 IR zarmorz10-45t-p 36 10 Nitrous oxide zarmorz10-45t-8 36 10 IR-800 zarmorz10-45t-c 36 10 Carbon dioxide zarmorz10-45t-n 36 10 Nitrogen C/w plug for test. Brass base block c/w 45 hole Ø B ZRMOR-45-O 18,7 8 OXYGEN ZRMOR-45-V 18,7 8 VCUUM ZRMOR-45-4 18,7 8 IR ZRMOR-45-P 18,7 8 Nitrous oxide ZRMOR-45-8 18,7 8 IR-800 ØB 36 45 9 45 Brass/zamac base block c/w 135 copper pipe ZRMOR-45-C 18,7 8 Carbon dioxide 45 Ø B ZRMORZ08-135T-O 36 8 OXYGEN ZRMOR-45-OP 18,7 8 OXYGEN/Nitrous oxide ZRMOR10-45-O 18,7 10 OXYGEN ZRMORZ08-135T-V 36 8 VCUUM ZRMOR10-45-V 18,7 10 VCUUM ZRMORZ08-135T-4 36 8 IR ZRMOR10-45-4 18,7 10 IR ZRMORZ08-135T-P 36 8 Nitrous oxide ZRMOR10-45-P 18,7 10 Nitrous oxide ZRMORZ08-135T-8 36 8 IR-800 ZRMOR10-45-8 18,7 10 IR-800 ZRMORZ08-135T-C 36 8 Carbon dioxide ZRMOR10-45-C 18,7 10 Carbon dioxide 135 ØB ZRMORZ08-135T-N 36 8 Nitrogen ZRMOR10-45-OP 18,7 10 OXYGEN/Nitrous oxide C/w plug for test. C/w plug for test. 10 11
BRSS base block c/w 135 hole Brass base block c/w back copper pipe 140 Ø B Ø B 135 ZRMOR-135-O 18,7 8 OXYGEN ZRMORD-T-O 23,7 8 OXYGEN ØB ZRMOR-135-V 18,7 8 VCUUM ZRMORD-T-V 23,7 8 VCUUM ZRMOR-135-4 18,7 8 IR ZRMORD-T-4 23,7 8 IR ØB 36 45 9 ZRMOR-135-P 18,7 8 Nitrous oxide ZRMOR-135-8 18,7 8 IR-800 ZRMORD-T-P 23,7 8 Nitrous oxide ZRMORD-T-8 23,7 8 IR-800 36 45 ZRMOR-135-C 18,7 8 Carbon dioxide ZRMORD-T-C 23,7 8 Carbon dioxide ZRMOR-135-N 18,7 8 Nitrogen ZRMORD-T-N 23,7 8 Nitrogen C/w plug for test. C/w plug for test. Brass base block for flexible hose Ø B ØB ZRMOR-PG6-O 23,7 6 OXYGEN ZRMOR-PG8-V 23,7 8 VCUUM 9 ØB 36 45 Vertical inlet brass base block Ø B ZRMOR-O 18,7 8 OXYGEN ZRMOR-V 18,7 8 VCUUM ZRMOR-4 18,7 8 IR ZRMOR-P 18,7 8 Nitrous oxide ZRMOR-8 18,7 8 IR-800 ZRMOR-PG6-4 23,7 6 IR ZRMOR-PG6-P 23,7 6 Nitrous oxide ZRMOR-PG6-8 23,7 6 IR-800 ZRMOR-PG6-C 23,7 6 Carbon dioxide ZRMOR-PG6-N 23,7 6 Nitrogen C/w plug for test. 36 45 ZRMOR-C 18,7 8 Carbon dioxide ZRMOR-OP 18,7 8 OXYGEN/Nitrous oxide Brass base block c/w NIST connector 65 ZRMOR10-O 18,7 10 OXYGEN ZRMORD-O-MNIST 23,7 OXYGEN ZRMOR10-V 18,7 10 VCUUM ZRMORD-V-MNIST 23,7 VCUUM ZRMOR10-4 18,7 10 IR ZRMORD-4-MNIST 23,7 IR ZRMOR10-P 18,7 10 Nitrous oxide ZRMORD-P-MNIST 23,7 Nitrous oxide ZRMOR10-8 18,7 10 IR-800 ZRMOR10-C 18,7 10 Carbon dioxide ZRMOR10-OP 18,7 10 OXYGEN/Nitrous oxide C/w plug for test. ZRMORD-8-MNIST 23,7 IR-800 ZRMORD-C-MNIST 23,7 Carbon dioxide ZRMORD-N-MNIST 23,7 Nitrogen C/w plug for test. 12 13
Brass base block for flexible hose Ø B Brass base block c/w vertical copper pipe Ø B ØB ZRMORD-O-PG6 18,7 6 OXYGEN ZRMOR-T-O 18,7 8 OXYGEN 140 ØB ZRMORD-V-PG8 18,7 8 VCUUM ZRMOR-T-V 18,7 8 VCUUM ZRMORD-4-PG6 18,7 6 IR ZRMOR-T-4 18,7 8 IR 36 45 50 ZRMORD-P-PG6 18,7 6 Nitrous oxide ZRMORD-8-PG6 18,7 6 IR-800 ZRMOR-T-P 18,7 8 Nitrous oxide ZRMOR-T-8 18,7 8 IR-800 ZRMORD-C-PG6 18,7 6 Carbon dioxide ZRMORD-N-PG6 18,7 6 Nitrogen C/w plug for test. Brass base block c/w 45 copper pipe Ø B ZRMOR-T-C 18,7 8 Carbon dioxide ZRMOR-T-OP 18,7 8 OXYGEN/Nitrous oxide ZRMOR10-T-O 18,7 10 OXYGEN ZRMOR10-T-V 18,7 10 VCUUM ZRMOR10-T-4 18,7 10 IR ZRMOR10-T-P 18,7 10 Nitrous oxide ZRMOR10-T-8 18,7 10 IR-800 ZRMOR10-T-C 18,7 10 Carbon dioxide ZRMOR10-T-N 18,7 10 Nitrogen ZRMOR10-T-OP 18,7 10 OXYGEN/Nitrous oxide C/w plug for test. 36 45 36 45 140 ØB 45 ZRMOR-45T-O/1 18,7 8 OXYGEN ZRMOR-45T-V/1 18,7 8 VCUUM ZRMOR-45T-4/1 18,7 8 IR ZRMOR-45T-P/1 18,7 8 Nitrous oxide ZRMOR-45T-8/1 18,7 8 IR-800 ZRMOR-45T-C/1 18,7 8 Carbon dioxide ZRMOR-45T-OP/1 18,7 8 OXYGEN/Nitrous oxide ZRMOR1045T-O/1 18,7 10 OXYGEN ZRMOR1045T-V/1 18,7 10 VCUUM ZRMOR1045T4/1 18,7 10 IR ZRMOR1045T-P/1 18,7 10 Nitrous oxide ZRMOR1045T8/1 18,7 10 IR-800 ZRMOR1045T-C/1 18,7 10 Carbon dioxide ZRMOR1045TOP/1 18,7 10 OXYGEN/Nitrous oxide C/w plug for test. SPRE PRT Spare part kit for base block ZRMOR/VNR LL 14 15
NEWS 2016 Sockets OR range The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards: BS 5682:1998, DIN 13260-2, NF S 90-116, FD S 90-119, SS 875 24 30, JIS T 7101, S 2896 and ENV 737-6 for the dimensions of linking point to the probe; EN ISO 9170-1 for design and manufacture requirements. Materials: Brass EN 12164 - CuZn39Pb3 nickel plated NBR/EPDM ISI BS/POM DIN 13260-2 New DIN 13260-2 socket c/w metal sleeve VGTDEM-OR-O VGTDEM-OR-V VGTDEM-OR-4 VGTDEM-OR-P VGTDEM-OR-C OXYGEN VCUUM IR Nitrous oxide Carbon dioxide Ø45 VGTDEM-OR-N Nitrogen Supplied with releaser sleeve that can be custom made on request. 44 17
New DIN 13260-2 socket c/w plastic sleeve DIN 13260-2 profile cover COLOUR VGTDE-OR-O OXYGEN ZGD75-o OXYGEN WITE Ø45 VGTDE-OR-V VCUUM ZGD75-V VCUUM YELLOW VGTDE-OR-4 IR ZGD75-4 IR BLCK/WITE VGTDE-OR-P Nitrous oxide ZGD75-P Nitrous oxide BLUE 44 VGTDE-OR-C VGTDE-OR-N Carbon dioxide Nitrogen ZGD75-C Carbon dioxide GREY Supplied with releaser sleeve that can be custom made on request. Ø 75 DIN 13260-2 socket DIN 13260-2 PROBE 44 Ø45 VGTDM-OR-O OXYGEN VGTDM-OR-V VCUUM VGTDM-OR-4 IR VGTDM-OR-P Nitrous oxide VGTDM-OR-C Carbon dioxide VGTDM-OR-N Nitrogen Supplied with releaser sleeve that can be custom made on request. Elbow barb end probe DISTINCTIVE COLOUR IGTGD-PG6-O WITE 6 OXYGEN IGTGD-PG8-V YELLOW 8 VCUUM IGTGD-PG6-4 BLCK-WITE 6 IR IGTGD-PG6-P BLUE 6 Nitrous oxide IGTGD-PG6-C GREY 6 Carbon dioxide 22 28 64 49 IGTGD-PG6-N BLCK 6 Nitrogen Supplied with sticky label that can be custom made on request. Elbow barb end probe with check valve DIN 13260-2 horizontal socket for flow-meters DISTINCTIVE COLOUR IIGTGD-PG6-O WITE 6 OXYGEN 22 49 Ø45 VGTDMO-OR-O OXYGEN IIGTGD-PG6-4 BLCK-WITE 6 IR 28 VGTDMO-OR-C Carbon dioxide IIGTGD-PG6-P BLUE 6 Nitrous oxide VGTDMO-OR-N Nitrogen IIGTGD-PG6-C GREY 6 Carbon dioxide 64 44 Supplied with releaser sleeve that can be custom made on request. Supplied with sticky label that can be custom made on request. 18 19
F1/4 probe BS 5682:2015 plastic socket 22 28 47 F1/4 DISTINCTIVE COLOUR IGTD-F1/4-O WITE 6 OXYGEN IGTD-F1/4-V YELLOW 8 VCUUM IGTD-F1/4-4 BLCK-WITE 6 IR IGTD-F1/4-P BLUE 6 Nitrous oxide IGTD-F1/4-C GREY 6 Carbon dioxide Supplied with releaser sleeve that can be custom made on request. VGTBSP-OR-O OXYGEN VGTBSP-OR-V VCUUM VGTBSP-OR-4 IR VGTBSP-OR-P Nitrous oxide VGTBSP-OR-C Carbon dioxide VGTBSP-OR-8 IR-800 Supplied with releaser sleeve that can be custom made on request. 43 Ø50 BS 5682:2015 BS 5682:2015 socket GSS BS 8532:2011 Ø 12 VGTBSM-OR-O OXYGEN VGS-BS with box 141 Ø50 VGTBSM-OR-V VCUUM VGS-BS/1 without box VGTBSM-OR-4 IR VGTBSM-OR-P Nitrous oxide 43 VGTBSM-OR-C VGTBSM-OR-8 Carbon dioxide IR-800 Supplied with releaser sleeve that can be custom made on request. GSS BS 8532:2011 c/w NIST connector BS 5682:2015 horizontal socket for flow-meters VEGS-BS-MNIST Ø50 VGTBSMO-OR-O VGTBSMO-OR-V VGTBSMO-OR-4 VGTBSMO-OR-P OXYGEN VCUUM IR Nitrous oxide 43 VGTBSMO-OR-C VGTBSMO-OR-8 Carbon dioxide IR-800 Supplied with releaser sleeve that can be custom made on request. 20 21
BS 5682:2015 Probe Bulkhead nut B COLOUR 3 Straight barb end probe PGTF/1 18,7 36,6 GREY IGTBS-PG6-O 6,5 OXYGEN M27x1 B IGTBS-PG8-V 8 VCUUM 66 IGTBS-PG6-4 6,5 IR IGTBS-PG6-P 6,5 Nitrous oxide IGTBS-PG6-8 6,5 IR-800 Made of nickel plated brass. identification ring B COLOUR F1/4 probe IGTBS-F1/4-O 1/4 OXYGEN ZGTF-O 38 55 WITE OXYGEN ZGTF-V 38 55 YELLOW VCUUM ZGTF-4 38 55 BLCK/WITE IR 58,3 IGTBS-F1/4-V 1/4 VCUUM IGTBS-F1/4-4 1/4 IR Made of nickel plated brass. ZGTF-P 38 55 BLUE Nitrous oxide ZGTF-8 38 55 WITE/BLCK IR-800 ZGTF-C 38 55 GREY Carbon dioxide FNOR NF S 90-116 FD S 90-119 ZGTFD70-O 38 70 WITE OXYGEN ZGTFD70-V 38 70 YELLOW VCUUM ZGTFD70-4 38 70 BLCK/WITE IR ZGTFD70-P 38 70 BLUE Nitrous oxide ZGTFD70-8 38 70 WITE/BLCK IR-800 B 38 FNOR socket ZGTFD70-C 38 70 GREY Carbon dioxide M27x1 VGTFM-OR-O VGTFM-OR-V VGTFM-OR-4 OXYGEN VCUUM IR VGTFM-OR-P Nitrous oxide 11 22 VGTFM-OR-C VGTFM-OR-8 Carbon dioxide IR-800 22 23
NF S 90-116 and FD S 90-119 Probe F1/4 probe DISTINCTIVE COLOUR IGTF-F1/4-O WITE 6 OXYGEN IGTF-F1/4-V YELLOW 8 VCUUM F 1/4" 51 Straight barb end probe DISTINCTIVE COLOUR IGTF-PG6-O WITE 6 OXYGEN IGTF-F1/4-4 BLCK-WITE 6 IR IGTF-F1/4-P BLUE 6 Nitrous oxide IGTF-F1/4-8 WITE-BLCK 6 IR-800 IGTF-F1/4-C GREY 6 Carbon dioxide 48 IGTF-PG8-V YELLOW 8 VCUUM Supplied with sleeve that can be custom made on request. IGTF-PG6-4 BLCK-WITE 6 IR IGTF-PG6-P BLUE 6 Nitrous oxide IGTF-PG6-8 WITE-BLCK 6 IR-800 IGTF-PG6-C GREY 6 Carbon dioxide Supplied with sleeve that can be custom made on request. 48 Elbow barb end probe Straight swivel male threaded probe DISTINCTIVE COLOUR B DISTINCTIVE COLOUR Ch 20 IGTGF-PG6-O WITE 6 OXYGEN IGTF-OR-M12-O M12x1 WITE OXYGEN IGTGF-PG8-V YELLOW 8 VCUUM IGTF-OR-M12-V M12x1 YELLOW VCUUM 46 B IGTGF-PG6-4 BLCK-WITE 6 IR IGTF-OR-M12-4 M12x1 WITE-BLCK IR IGTGF-PG6-P BLUE 6 Nitrous oxide IGTF-OR-M12-P M12x1 BLUE Nitrous oxide IGTGF-PG6-8 WITE-BLCK 6 IR-800 IGTGF-PG6-C GREY 6 Carbon dioxide IGTF-OR-M12-C M12x1 GREY Carbon dioxide IGTF-OR-M1/8-O 1/8 WITE OXYGEN 41,5 Supplied with sleeve that can be custom made on request. IGTF-OR-M1/8-V 1/8 YELLOW VCUUM M1/8" M1/8 probe DISTINCTIVE COLOUR IGTF-M1/8-O WITE 6 OXYGEN IGTF-M1/8-V YELLOW 8 VCUUM IGTF-M1/8-4 BLCK-WITE 6 IR IGTF-M1/8-P BLUE 6 Nitrous oxide IGTF-OR-M1/8-4 1/8 WITE-BLCK IR IGTF-OR-M1/4-O 1/4 WITE OXYGEN IGTF-OR-M1/4-V 1/4 YELLOW VCUUM Supplied with sleeve that can be custom made on request. 48 IGTF-M1/8-8 WITE-BLCK 6 IR-800 Supplied with sleeve that can be custom made on request. 24 25
SS 875 24 30 ENV 737-6 SS 875 24 30 socket ENV 737-6 socket Ø45 VGTM-OR-O VGTM-OR-V OXYGEN VCUUM VGTEM-OR-O VGTEM-OR-V OXYGEN VCUUM Ø53 VGTM-OR-4 IR VGTEM-OR-4 IR 39 VGTM-OR-P VGTM-OR-C Nitrous oxide Carbon dioxide VGTEM-OR-P VGTEM-OR-C Nitrous oxide Carbon dioxide 46,5 VGTM-OR-8 IR-800 VGTEM-OR-8 IR-800 Supplied with releaser sleeve that can be custom made on request. Supplied with releaser sleeve that can be custom made on request. SS 875 24 30 horizontal socket Ø45 VGTMO-OR-O VGTMO-OR-V VGTMO-OR-4 VGTMO-OR-P OXYGEN VCUUM IR Nitrous oxide 39 VGTMO-OR-C VGTMO-OR-8 Carbon dioxide IR-800 Supplied with releaser sleeve that can be custom made on request. SS 875 24 30 Probe Straight barb end probe ENV 737-6 Probe Elbow barb end probe DISTINCTIVE COLOUR IGTGE-PG6-O WITE 6 OXYGEN 60 41 IGT-PG6-O 6 OXYGEN IGT-PG10-V 10 VCUUM IGTGE-PG8-V YELLOW 8 VCUUM IGTGE-PG6-4 BLCK-WITE 6 IR 55 IGT-PG8-4 8 IR IGT-PG6-P 6 Nitrous oxide IGT-PG8-8 8 IR-800 IGT-PG6-C 6 Carbon dioxide IGTGE-PG6-P BLUE 6 Nitrous oxide IGTGE-PG6-8 WITE-BLCK 6 IR-800 IGTGE-PG6-C GREY 6 Carbon dioxide Supplied with sleeve that can be custom made on request. 26 27
JIS T 70101 S 2896 naest hetic Scavenge Ø B Ø B Ø50 JIS T 7101 socket VEGS-S 8 VGTJSM-OR-O OXYGEN VGTJSM-OR-V VCUUM 40,5 VGTJSM-OR-4 VGTJSM-OR-P IR Nitrous oxide 50 S 2896 Ø B S 2896 outlet Ø B S 2896 naest hetic Scavenge c/w NIST connector Ø 195 VGTS-O 1/4 OXYGEN VGTS-V 5/16 VCUUM VEGS-S-MNIST Ø FEMMIN M22X1,5 VGTS-4 1/4 IR Ø50 VGTS-P 1/4 Nitrous oxide VGTS-8 1/4 IR-800 49 VGTS-C 1/4 Carbon dioxide VGTS-N 1/4 Nitrogen 50 Ø S 2896 outlet c/w NIST connector Ø FEMMIN SPRE PRT Ø 50 VGTS-O-MNIST M22X1,5 OXYGEN VGTS-V-MNIST M22X1,5 VCUUM VGTS-4-MNIST M22X1,5 IR VGTS-P-MNIST M22X1,5 Nitrous oxide VGTS-8-MNIST M22X1,5 IR-800 Spare part kif for socket OR series STNDRD VGTD-OR-RIC DIN OXYGEN, IR, Nitrous oxide, Carbon dioxide VGTD-OR-V-RIC DIN VCUUM 49 VGTS-C-MNIST M22X1,5 Carbon dioxide VGTS-N-MNIST M22X1,5 Nitrogen VGTBS-OR-RIC BS all VGT-OR-RIC SS all 28 29
Plastic boxes OR RNGE Lid for BU fnor outlet BOXGTF c/w locking nut 65 BOXGTF-1 without c/w locking nut 15 65 99 B 79 Box without lid B Profile 56 16 ZBOX-GT-OR 56,8 46,2 suitable for DIN 13260-2 and SS 875 24 30 ZBOX-GT-OR/01 56,8 52,5 suitable for BS 5682:2015 and JIS T 7101 ZBOX-GT-OR/02 58,8 55 suitable for ENV 737-6 and DIN ORPEUS Suitable to be either flush-mounted or wall-mounted. identification label for FNOR plastic box BOXGTF/O BOXGTF/V OXYGEN VCUUM GS BOXGTF/4 IR 99 B 79 Box without lid BOXGTF/P BOXGTF/8 BOXGTF/C Nitrous oxide IR-800 Carbon dioxide B Profile BOXGTF/N Nitrogen ZBOX-GT-OR/0 56,8 46,2 without lid for DIN 13260-2 16 ZBOX-GT-OR/01 56,8 52,5 without lid for SS 8752430 65 46 Box c/w lid for FNOR outlet 65 67 ZBOXGTF c/w locking nut ZBOXGTF/1 without c/w locking nut 30 31
outlets UNI 9507 The terminal units of a medical gas pipeline system are devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances. n incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards that ensure the accordance to the European directive 93/42/EEC so to grant a non-interchangeability among different gases and prevent from any possible mistake. 33
8 Base block c/w connector to weld ZRM60-O/PB ZRM60-V/PB ZRM60-4/PB ZRM60-P/PB ZRM60-8/PB ZRM60-C/PB ZRM60-N/PB OXYGEN VCUUM IR Nitrous oxide IR-800 Carbon dioxide PROTOSSIDO 36 Base block UNI 9507 exagonal head plug for base block This component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacuum). The base blocks are designed in accordance with the standard EN ISO 9170-1 for design and manufacture requirements. ll base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed. DISTINCTIVE COLOUR GT-O/TP M22x1,5D WITE OXYGEN GT-V/TP M24x1,5D YELLOW VCUUM GT-4/TP M20x1,5S BLCK IR GT-P/TP M16x1,5D BLUE Nitrous oxide 17 5 7 Ch 11 Materials: Brass EN 12164 - CuZn39Pb3 NBR/EPDM ISI GT-8/TP M18x1,5D BLCK IR-800 GT-C/TP M20x1,5D GREY Carbon dioxide c/w O-ring. Ø36 35
New UNI 9507 socket DISTINCTIVE COLOUR 5,5 9 45 VGTIM-O M22x1,5D WITE OXYGEN VGTIM-V M24x1,5D YELLOW VCUUM VGTIM-4 M20x1,5S BLCK-WITE IR VGTIM-P M16x1,5D BLUE Nitrous oxide VGTIM-8 M18x1,5D WITE-BLCK IR-800 VGTIM-C M20x1,5D GREY Carbon dioxide Supplied with sleeve that can be custom made on request. 6,8 Ø53 5,5 9 45 UNI 9507 socket c/w threaded inlet NEWS 2016 DISTINCTIVE COLOUR VGTX60-O-M1/4 1/4 WITE OXYGEN VGTX60-O-M3/8 3/8 WITE OXYGEN 6,8 Ø53 Sockets uni 9507 Supplied with sleeve that can be custom made on request. The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gasspecific connecting point. These sockets have been designed in accordance with the following standards: UNI 9507; EN ISO 9170-1 for design and manufacture requirements. Materials: Brass EN 12164 - CuZn39Pb3 nickel plated NBR/EPDM ISI BS/POM 37
UNI 9507 Probes Bulkhead nut B COLOURS 3 35 62 Elbow barb end probe DISTINCTIVE COLOUR PGTF/1 18,7 36,6 GREY M27x1 B IGTG60-PG6-O WITE 6 OXYGEN 55 IGTG60-PG8-V YELLOW 8 VCUUM IGTG60-PG6-4 BLCK-WITE 6 IR IGTG45-PG6-P BLUE 6 Nitrous oxide IGTG60-PG6-8 WITE-BLCK 6 IR-800 identification ring IGTG60-PG6-C GREY 6 Carbon dioxide Supplied with sleeve that can be custom made on request. B COLOURS ZGTF-O 38 55 WITE OXYGEN ZGTF-V 38 55 YELLOW VCUUM ZGTF-4 38 55 BLCK/WITE IR F1/4 probe ZGTF-P 38 55 BLUE Nitrous oxide 35 60 F1/4 DISTINCTIVE COLOUR IGT60-F1/4-O WITE 1/4" OXYGEN IGT60-F1/4-V YELLOW 1/4" VCUUM ZGTF-8 38 55 WITE/BLCK IR-800 ZGTF-C 38 55 GREY Carbon dioxide ZGTFD70-O 38 70 WITE OXYGEN IGT60-F1/4-4 BLCK-WITE 1/4" IR IGT45-F1/4-P BLUE 1/4" Nitrous oxide ZGTFD70-V 38 70 YELLOW VCUUM ZGTFD70-4 38 70 BLCK/WITE IR B IGT60-F1/4-8 WITE-BLCK 1/4" IR-800 ZGTFD70-P 38 70 BLUE Nitrous oxide IGT60-F1/4-C GREY 1/4" Carbon dioxide ZGTFD70-8 38 70 WITE/BLCK IR-800 Supplied with sleeve that can be custom made on request. ZGTFD70-C 38 70 GREY Carbon dioxide FNOR NSF 90-116 socket c/w UNI thread inlet DISTINCTIVE COLOUR UNI 9507 and FNOR NFS 90-116 BOX 59 VGTF-O M22x1,5D WITE OXYGEN VGTF-V M24x1,5D YELLOW VCUUM VGTF-4 M20x1,5S BLCK-WITE IR VGTF-P M16x1,5D BLUE Nitrous oxide VGTF-8 M18x1,5D WITE-BLCK IR-800 VGTF-C M20x1,5D GREY Carbon dioxide Box BOX-GT Suitable to be either flush-mounted or surface-mounted Supplied with: - service cap; - components designed to link the boxes to form a series. 85 107 85 22 37,5 69 38 39
NIST connectors (NIST) Range of male and female components intended to maintain gas-specificity by allocation of a set of different diameters and screw thread to mating components to each gas. These connectors are suitable for medical gases when the pressure range is 300 kpa - 1400 kpa and for vacuum when the pressure range is 10 kpa - 100 kpa. These components are designed in accordance with the standard EN 15908 Materials: Brass EN 12164 - CuZn39Pb3 nickel plated NBR/EPDM ISI 41
1st fix Nist connector c/w copper pipe welded 1st fix Nist connector c/w hosetail Ch17 120 161,5 Ch 29 M22x1,5 VGTN-PL-O-T1/2 1/2 OXYGEN VGTN-PL-4-T1/2 1/2 IR VGTN-PL-V-T1/2 1/2 VCUUM VGTN-PL-P-T1/2 1/2 Nitrous oxide VGTN-PL-O-PG6 6 OXYGEN VGTN-PL-4-PG6 6 IR VGTN-PL-V-PG8 8 VCUUM VGTN-PL-P-PG6 6 Nitrous oxide 21 59 M22x1,5 VGTN-PL-C-T1/2 1/2 Carbon dioxide VGTN-PL-8-PG6 6 IR-800 VGTN-PL-8-T1/2 1/2 IR-800 VGTN-PL-C-PG6 6 Carbon dioxide PL = free flow. PL = free flow. 1st fix Nist connector c/w check valve and copper pipe welded NIST straight barb end probe Ch 32 M22x1,5 VGTN-O-T10 10 OXYGEN VGTN-4-T10 10 IR IGTN-PG6-O 6 OXYGEN IGTN-PG8-V 8 VCUUM M22x1,5 150 200 VGTN-V-T12 12 VCUUM VGTN-P-T10 10 Nitrous oxide VGTN-C-T10 10 Carbon dioxide IGTN-PG6-4 6 IR IGTN-PG6-P 6 Nitrous oxide IGTN-PG6-8 6 IR-800 25 61,5 VGTN-8-T10 10 IR-800 IGTN-PG6-O 6 IR/OXYGEN VGTN-GSS-T15* 15 SDEG *No check valve. Ch22 21 70 20 M22x1,5 1st fix Nist connector c/w hosetail & check valve VGTN-O-PG6 6 OXYGEN VGTN-4-PG6 6 IR VGTN-V-PG8 8 VCUUM VGTN-P-PG6 6 Nitrous oxide VGTN-C-PG6 6 Carbon dioxide 1st fix Nist connector c/w M1/4 thread VGTN-O-M1/4 1/4 OXYGEN VGTN-V-M1/4* 1/4 VCUUM VGTN-4-1/4 1/4 IR * Free flow. Ch 23 11 60 M22x1,5 VGTN-8-PG6 6 IR-800 42 43
naesthetic Scavenging System (GSS) and ir Motor They are the part of system to which the operator makes connection and disconnection for exhausting the medical gases coming from anaesthetic and breathing systems. To grant the gas-specifity and prevent any mistake, these. 45
Ø12 GSS type 1L outlet for centralized system DISTINCTIVE COLOUR VEGS120/EN1 red magenta Supplied with metal sleeve that can be custom made on request. Ø50 31,5 47,5 GSS type 1L active Ø12 VEG120/EN1 DISTINCTIVE COLOUR red magenta Ø 10 (supply) Supplied with: - adjusting screw for setting following the standard EN ISO 7396-2.- green suction indicator. - sleeve that can be custom made on request. - manifold for connecting the exhaust copper pipe. ØB 16 (evacuation) 31,5 47,5 Ø50 EN ISO 9170-2 GSS sockets Ø50 Ø These are the female parts of a terminal unit attached to the base block by a gas-specific interface which contain the gas-specific connection point. Materials: Brass EN 12164 - CuZn39Pb3 luminium series 2000 or 6000 Steel NBR ISI P/POM GSS type 1L active c/w bulkhead plate DISTINCTIVE COLOUR VEG120/EN2 red magenta Ø 10 (supply) Supplied with: - adjusting screw for setting following the standard EN ISO 7396-2.- green suction indicator. - sleeve that can be custom made on request. - manifold for connecting the exhaust copper pipe. ØB 16 (evacuation) Ø65 ØB 47
Ø50 20 Ø 15 GSS type 1L active for ceiling pendants DISTINCTIVE COLOUR Ø VEG120/EN3 red magenta 10 (supply) Ø65 Supplied with: - adjusting screw for setting following the standard EN ISO 7396-2. - green suction indicator. - sleeve that can be custom made on request. - adapter for connecting the exhaust copper pipe or flexible hose. Box for GSS active outlet DISTINCTIVE COLOUR RL BOX-GSS red 3003 254 BOX-GSS/001 verde 6019 BOX-GSS/002 BLUE 5015 BOX-GSS/003 GREY 7035 EN ISO 91790-2 GSS probes 160 77 BOX-GSS/004 beige 1013 These are the male non-interchangeable parts to be connected to the outlets. Materials: luminium series 2000 or 6000 anodized GSS 1L TYPE BOX 107 85 22 Box without lid suitable for GSS outlets 85 37,5 69 BOX-GT Suitable to be either flush-mounted or surface-mounted Supplied with: - service cap; - components designed to link the boxes to form a series. Ø G 60 30 60 Barb end type 1L GSS indicator DISTINCTIVE COLOUR D ØG E IEGG120-PG22/EN red magenta 30 22 63 E LINDRR4 D 48 49
ENV 737-6 outlet for ceiling pendants Ø15 IEGG120-PG22/EN 9 Ø36 82 Ø70 Ø70 Ø64 68 60 55,5 ENV 737-6 outlet c/w copper pipes VM737-TL 9 Ø8 Ø15 55,5 IR Motor ENV 737-6 This terminal unit integrates a medical tool drive outlet with a gas scavenging terminal unit. ENV 737-6 barb end probe 163 Materials: Brass EN 12164 - CuZn39Pb3 nickel plated Steel NBR nodized luminium IM737-PG6 9 Ø6 10 20 51
dapters for ambulances Materials: Brass EN 12164 - CuZn39Pb3 NBR/EPDM ISI BS/POM luminium 53
24 dapter with one FNOR NF S 90-116 socket and barb end inlet dapter with four FNOR NF S 90-116 sockets and barb end inlet 40 18 26 26 20 GTF-1V-PG6-V 6 VCUUM GTF-4V-PG6-O 6 OXYGEN 156 20 60 61,5 24 dapter with two FNOR NF S 90-116 sockets and barb end inlet dapter with one SS 875 24 30 socket and barb end inlet 21 26 GTF-2V-PG6-O 6 OXYGEN GT-1V-O 6 OXYGEN 54 110 20 GTF-2V-PG6-V 6 VCUUM 42 40 19 dapter with three FNOR NF S 90-116 sockets and barb end inlet dapter with two SS 875 24 30 sockets and barb end inlet 68 21 26 117 20 GTF-3V-PG6-O 6 OXYGEN GT-2V-O 6 OXYGEN 54 110 54 55
68 21 dapter with two DIN 13260-2 sockets and barb end inlet dapter with one BS socket and plastic box c/w barb end inlet 66,5 GTD-2V-O 6 OXYGEN ZBOX-GVBS-O OXYGEN GTD-2V-4 6 IR ZBOX-GVBS-4 IR 110 68 21 dapter with four DIN 13260-2 sockets and barb end inlet dapter with one SS socket and plastic box c/w barb end inlet 66,5 GTD-4V-O 6 OXYGEN ZBOX-GV-O OXYGEN 190 GTD-4V-4 6 IR ZBOX-GV-4 IR dapter with one DIN 13260-2 socket and plastic box c/w barb end inlet ZBOX-GV-O ZBOX-GV-4 OXYGEN IR 56 57
NEWS 2016 FLOW-METER 59
FNOR NFS 90-116/FD S 90-119 BS 5682:2015 SCLE SCLE IGTF-0-FL4 0-4 l/min IGTB-0-FL4 0-4 l/min IGTF-0-FL5 0-5 l/min IGTB-0-FL5 0-5 l/min 9/16 9/16 ENV 737-6 DIN 13260-2 SCLE SCLE IGTE-0-FL4 0-4 l/min IGTD-0-FL4 0-4 l/min IGTE-0-FL5 0-5 l/min IGTD-0-FL5 0-5 l/min 9/16 9/16 SS 875 24 30 UNI 9507 SCLE SCLE IGT-0-FL4 0-4 l/min IGT60-0-FL4 0-4 l/min 9/16 IGT-0-FL5 0-5 l/min IGT60-0-FL5 0-5 l/min 9/16 60 61
DIN mini socket male threaded Ø 41,5 Ch27 VGTD-O-M1/4 1/4 OXYGEN VGTD-4-M1/4 1/4 IR Ø VGTD-V-M1/4 1/4 VCUUM VGTD-P-M1/4 1/4 Nitrous oxide VGTD-C-M1/4 1/4 Carbon dioxide VGTD-O-M3/8 3/8 OXYGEN 9 26 DIN mini socket with barb end VGTD-O-PG6 6 OXYGEN 50,5 VGTD-4-PG6 6 IR Ch 27 SS mini socket male threaded 41 VGT-O-M10X1 M10x1 OXYGEN mini socket for FLOW-METER VGT-4-M10X1 M10x1 IR VGT-P-M10X1 M10x1 Nitrous oxide VGT-C-M10X1 M10x1 Carbon dioxide VGT-O-M1/4 1/4 OXYGEN VGT-4-M1/4 1/4 IR Ch 24 63
9 39 FNOR mini socket male threaded B Ø S mini socket male threaded L L VGTF-O-M1/4 6,5 1/4 OXYGEN VGTS-O-M1/4 1/4 47 OXYGEN Ø 25 VGTF-4-M1/4 6,5 1/4 IR VGTF-O-M3/8 10 3/8 OXYGEN Ch23 VGTF-4-M3/8 10 3/8 IR VGTF-V-M3/8 10 3/8 VCUUM L BS mini socket male threaded UNI mini socket male threaded L L L VGTBS-O-M1/4/V 1/4 60 OXYGEN VGTI60-O-M1/4 1/4 56 OXYGEN VGTI60-O-M3/8 3/8 41 OXYGEN L dapter with one UNI 9507 socket c/w F1/8 thread inlet L JIS mini socket male threaded L VGTJS-O-M1/4 1/4 54,5 OXYGEN L GT-F1/8-O 1/8" 70 OXYGEN GT-F1/8-V 1/8" 70 VCUUM GT-F1/8-4 1/8" 70 IR GT-F1/8-P 1/8" 70 Nitrous oxide 64 65
NOTE: Flexible hoses for medical gas Flexible hose for EN ISO 5359 assemblies DISTINCTIVE COLOUR NTPB6x12-O WITE OXYGEN NTPB8x14-V YELLOW VCUUM NTPB6x12-4 WITE-BLCK IR NTPB6x12-P BLUE Nitrous oxide NTPB6x12-C GREY Carbon dioxide NTPB6x12-NC BLCK - 50 meters coil. Without DEP. 66
NOTE: NOTE:
www.presblock.com Pres Block S.p.. Via lpignano, 151-155 10040 Caselette (TO) Italia tel +39 011.9688055 fax +39 011.9688668 The products described herein, including without limitation, product features, specifications, designs, availability are subject to change by Pres Block at any time without notice.