M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage proof: ontact resistance: Insulation resistance: High Temp Thermoplastic, UL94V-0 Phosphor ronze Tin 0.5 per contact 150V 250V 50mΩ max 500MΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): Environmental Operating temperature: Solderability: Soldering heat resistance: 30 operations 2.7N per contact 0.4N per contact -20 to +125 210 for 5 seconds 260 for 10 seconds 1mm (.039") PITH Mating Profile 4.30 158
M40 onnectors Vertical Surface Mount 1mm (.039") PITH Locating pegs to ensure correct positioning onto the board. Polarised to prevent mis-mating. Staggered pin-out to help board layout. FEMLE 0.70 1.30 4.20 Ø1.30 6.00 0.40 + 1 3.30 E + 1 3.40 1.95 Recommended P oard Pattern Ø1.20 5.60 D LULTION + 7.1 MLE (Total No. Of ontacts 3) / 2 + 4.1 D E mm for 9, 15, 21, 25 way; otherwise 0.80mm 1.84mm for 9, 15, 21, 25 way; otherwise 3.00mm 4.20 0.40 + 1 3.30 0.70 Ø1.30 1.30 6.00 E + 1 3.40 Ø1.20 5.60 D Recommended P oard Pattern 1.95 SERIES ODE GENDER 0 Male M40-6 X 0 XX XX X PKGING lank Loose R Tape & Reeled FINISH 46 Tin 2 Female TOTL NO. OF ONTTS 09, 15, 21, 25, 31, 41, 51 159
M40-310/320 onnectors Specification range of double row mm pitch SMT pin header and socket connectors. Materials Mouldings: ontacts Male: Female: Finish: Electrical urrent: Voltage proof: ontact resistance: Insulation resistance: High Temp Thermoplastic, UL94V-0 rass Phosphor ronze Gold 1.0 per contact 500V 30mΩ max 1,000MΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): Vibration sensitivity: Shock severity: Environmental Operating temperature: Solderability: Soldering heat resistance: 300 operations 1.5N per contact 0.1N per contact 50 2000Hz, 45 minutes duration 294m/s² (30G) for 11ms -40 to +105 245 for 5 seconds 260 for 10 seconds 1mm (.039") PITH Mating Profile 4.25 160
M40 onnectors Vertical Surface Mount 1mm (.039") PITH Locating pegs to ensure correct positioning onto the board. Supplied in tape and reel packaging with pick and place caps as standard. Twin beam female connector for higher durability. FEMLE LULTION + 1.4 0.60 No. of contacts per row - 1 No. of contacts per row - 2 2.25 2.50 Ø0.60 4.60 Ø0.45 0.30 3.60 1.30 Recommended P oard Pattern MLE LULTION No. of contacts per row No. of contacts per row - 1 No. of contacts per row - 2 0.56 0.30 square 3.20 1.80 1.50 Ø0.80 1.20 6.00 Ø0.60 5.20 0.50 Recommended P oard Pattern SERIES ODE GENDER 1 Female 2 Male M40-3 X 0 XX 45 R TPE & REELED FINISH 45 Gold NO. OF ONTTS PER ROW 03, 04, 05, 06, 08, 10, 20, 25 161
M40 able-to-oard Specification range of cable-to-board connectors on mm pitch - SMT male connectors and cable female connectors in single and double row options. Materials Mouldings SMT onnectors: able Housings: ontacts: Finish: Electrical urrent: Working voltage: Voltage proof: ontact resistance: Insulation resistance: High Temp Thermoplastic, UL94V-0 Thermoplastic, UL94V-0 Phosphor ronze Tin 1 per contact 50V /D 500V /D 30mΩ max 100MΩ min Mating Profiles Mechanical Durability: 50 operations Insertion force (max): 2.0N per contact Withdrawal force (min): 0.4N per contact rimped wire retention (min) 28 WG wire: 12.7N 30 WG wire: 9.8N 32 WG wire: 4.9N Vibration sensitivity: 10 55Hz, 1.5mm, 6 hours duration Shock severity: 490m/s² (50G) for 11ms Environmental Operating temperature: Solderability: Soldering heat resistance: -25 to +85 245 for 5 seconds 260 for 5 seconds 1.27mm 1mm (.039") (.50") PITH FEMLE RIMP SINGLE ROW DOULE ROW VERTIL SMT 6.85 max 6.85 max MLE 7.70 max HORIZONTL SMT 162
M40 able-to-oard onnectors Female rimp Housings 1mm (.039") PITH rimp contacts or pre-cabled contacts are orderd separately - see following pages. rimped contacts on wires are inserted into rear of connector housing - no additional tooling required. SINGLE ROW LULTION + 4 DOULE ROW LULTION + 4 No. of contacts per row - 1 No. of contacts per row - 1 2.08 4.14 5.00 5.00 2.75 4.84 M40-1X0 XX 00 SERIES ODE TYPE 110 Single Row 120 Double Row NO. OF ONTTS PER ROW 02 to 20 Single Row 05 to 10, 12, 15, 20, 25 Double Row 163
M40 able-to-oard onnectors Female rimp ontacts Open crimp design, ideal for automation. Use with female crimp housings shown on previous page. Pre-crimped contacts with wire attached shown on following page. Requires crimp machine with applicable tooling for crimping to wires. 1mm (.039") PITH ONTTS Order code is for one reel of 15,000 contacts. 4.00 3.85 WIRE STRIPPING DETIL Ø0.75 max 28 to 32 WG 1.30 to 1.50 M40-1 00 00 46 SERIES ODE FINISH 46 Tin 164
M40 able-to-oard onnectors Female rimp ontacts - Pre-rimped Wires 1mm (.039") PITH Female crimp contacts pre-assembled wit a choice of wire sizes and lengths. PV insulated muti-strand tinned copper equipment wire to UL1571. Use with female crimp housingd shown on previous page. Ideal for prototype and pre-production applications. Individual contacts without wire shown on previous page. FEMLE SINGLE ENDED able Length FEMLE - FEMLE able Length M40-9XX 00 99 LE OLOUR 99 Red SERIES ODE SINGLE ENDED FEMLE - FEMLE 900 904 28 WG cable, 150mm length 901 905 33 WG cable, 150mm length 902 906 28 WG cable, 300mm length 903 907 32 WG cable, 150mm length 910 30 WG cable, 150mm length 911 30 WG cable, 150mm length 165
M40 able-to-oard onnectors Male Vertical Surface Mount Shrouded male connectors. Double row connector features locating pegs to ensure correct positioning onto the board. Tape and Reel option supplied fitted with pick and Place cap. 1mm (.039") PITH SINGLE ROW LULTION + 3 No. of contacts per row - 1 0.70 1.80 0.20 2.90 2.65 4.20 4.35 0.60 0.80 Recommended P oard Pattern DOULE ROW SERIES ODE TYPE 1 Single Row 2 Double Row 0.20 M40-30 X XX 46 X LULTION +3 No. of contacts per row - 1 +1.7 0.90 0.85 0.70 1.80 5.40 4.00 7.20 4.35 1.40 Ø0.45 0.60 Recommended P oard Pattern PKGING lank Loose R Tape & Reeled FINISH 46 Tin NO. OF ONTTS PER ROW 02 to 20 Single Row 05 to 08, 10, 12, 15 Double Row 166
M40 able-to-oard onnectors Male Horizontal Surface Mount 1mm (.039") PITH Shrouded male connectors. Tape and Reel option does not require Pick and Place cap. SINGLE ROW LULTION + 3 No. of contacts per row - 1 4.25 3.00 0.70 0.70 1.55 0.20 4.00 0.60 1.80 1.20 Recommended P oard Pattern M40-401 XX 46 X SERIES ODE NO. OF ONTTS PER ROW 02 to 20 PKGING lank Loose R Tape & Reeled FINISH 46 Tin 167
M30 onnectors Specification range of 1.25mm pitch male and female connectors, for cable-to-board applications. Material Mouldings SMT: Others: ontacts Male: Female: Finish: Electrical urrent: Working voltage: Voltage proof: ontact resistance: Insulation resistance: Nylon 6T, UL94V-0 Nylon 66, UL94V-0 rass Phosphor ronze Tin 1 per contact 150V 500V /D 30mΩ max 500MΩ min Mechanical Durability: Insertion force (max): Withdrawal force (min): rimp retention (min): 50 operations 4.9N per contact 0.5N per contact 4.9N per contact rimped wire retention (min) 26 WG wire: 19.6N 28 WG wire: 9.8N 30 WG wire: 7.8N Vibration sensitivity: 10 55Hz, 1.5mm, 6 hours duration Shock severity: 490m/s2 (50G) for 11ms Environmental Operating temperature: Solderability: Soldering heat resistance P Tail: SMT: -25 to +85 245 for 5 seconds 250 for 5 seconds 260 for 10 seconds 1.25mm 1.27mm (.049") (.50") PITH Mating Profiles MLE P TIL SMT FEMLE RIMP 5.95 max 6.45 max 168
M30 onnectors 1.25mm (.049") PITH Female rimp Housing Loose or reeled contacts. rimp contacts or pre-cabled contacts are ordered separately - see the following pages. HOUSING LULTION + 2.9 1.25 x (No. of contacts per row - 1) 1.25 3.20 2.30 4.00 M30-110 XX 00 SERIES ODE NO. OF ONTTS PER ROW 02 to 15 169
M30 onnectors Female rimp ontacts Loose or reeled contacts. Open crimp design, ideal for automation. Use with female crimp housings shown on previous page. Pre-crimped contacts with wire attached shown on following page. ONTTS HND RIMP TOOL 1.25mm (.049") PITH Reeled (continuous strip) Order code is for one reel of 10,000 contacts. 5.00 Instruction sheet is available at /instructions. For use with loose contacts. 3.70 ORDER ODE Z30-021 Loose (cropped) Order code is for one pack of 100 contacts. 4.30 max WIRE STRIPPING DETILS Ø0.65 to 26 to 30 WG 1.20 to 1.90 M30-1 0 X 00 46 SERIES ODE TYPE 5 Reeled contact 6 Loose contact FINISH 46 Tin 170
M30 onnectors 1.25mm (.049") PITH Female rimp ontacts Pre-rimped Wires Female crimp contacts pre-assembled with a choice of wire sizes and lengths. PTFE-insulated, multi-strand silver-plated copper conductor equipment wire. Use with female crimp housings shown on previous page. Ideal for prototype and pre-production applications. Individual contacts without wire shown on previous page. FEMLE SINGLE ENDED able Length FEMLE - FEMLE able Length M30-9XX 00 99 LE OLOUR 99 Red SERIES ODE SINGLE ENDED FEMLE - FEMLE 900 904 26 WG cable, 150mm length 901 905 30 WG cable, 150mm length 902 906 26 WG cable, 300mm length 903 907 30 WG cable, 150mm length 171
M30 onnectors Male Vertical Shrouded male connectors. SMT version features metal solder-down tabs and locating pegs to ensure correct positioning onto the board. Tape and Reel option supplied fitted with Pick and Place cap, contact technical@harwin.com for availability. P TIL LULTION 1.25 x (No. of contacts per row + 1) 1.25 x (No. of contacts per row - 1) 1.25mm (.049") PITH 3.40 4.30 1.25 Ø0.60 0.35 square 1.25 2.22 2.30 Recommended P oard Pattern SURFE MOUNT 3.40 LULTION + 6 1.25 x (No. of contacts per row - 1) + 2.1 0.35 square 1.25 1.50 0.20 3.10 + 0.8 Ø0.90 1.60 2.20 4.80 Ø0.80 0.80 0.70 1.25 Recommended P oard Pattern 1.80 M30-6 X 0 XX XX X PKGING SERIES ODE lank R Loose Tape & Reeled (M30-600) TYPE 0 Surface Mount FINISH 46 Tin 1 P Tail NO. OF ONTTS PER ROW 02 to 15 172