Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high after mounting and is just.mm (.10") wide. Highly reliable contact The contact has long dimples near the center that ensure continuity of low voltage and low current circuits at all times, even under conditions of vibration and abusive prying. Polarizing guides The header and housing have guides to prevent improper mating. This, the thinnest,.mm (.09") pitch connector, is.1mm (.19") in height after mounting and.mm (.10") in width. It is designed to meet the demand for the highdensity connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost. Whisker prevention The contact material is treated with a reflow process, and the square post is copper-undercoated and tin/lead-plated for whisker prevention. Easy and effective crimping lthough the contact is compact, it has a long wire strip length,. ± 0.mm (.10" ±.01"). This long length is very useful for automatic crimping and when crimping shielded wires. Interchangeability The shrouded header is interchangeable with those of.mm (.09") pitch insulation displacement HR connectors. JST Specifications Current rating:.0 C, DC Voltage rating: V C, DC Temperature range: - C to + C (including temperature rise in applying electrical current) Contact resistance: Initial value/10m Ω max. fter environmental testing/0m Ω max. Insulation resistance: MΩ min. Withstanding voltage: 00V C/minute pplicable wire: WG # to # pplicable PC board thickness: 0. to 1.mm(.01" to.0") * Contact JST for details. Standards Recognized file No. E09 Certified file No. LR01 File No. R09 (conforms to DIN/VDE 0) 1
Contact Shape.(.).(.11).0(.01) 1.0(.09) Shape pplicable wire mm WG # Insulation O.D. mm(in.) SEH-001T-P0. 0.0 to 0. 0 to 1.0 to 1.9(.09 to.0) SEH-00T-P0.L 0.0 to 0.0 to 0. to 1.1(.00 to.0) reel 9,000 1.(.0).0(.09) Phosphor bronze, Tin-plated 1.Contact JST if you require gold-plated contacts.contact JST for details..seh-00t-p0.l is not TÜV approved. Shape.(.).(.11).0(.01) 1.1(.09).0(.09) 1.(.0) Housing. (.09). JST 1 0. (.0).(.10) 0. (.0) 9 10 11 1 1 1 1 bag EHR-.(.09).0(.) EHR-.0(.19) 9.(.) EHR-.(.9) 1.0(.) EHR- 10.0(.9) 1.(.1) EHR- 1.(.9) 1.0(.9) EHR- 1.0(.91) 19.(.) EHR- 1.(.9).0(.) EHR- 9 0.0(.).(.9) EHR-10.(.).0(1.0) EHR-11.0(.9) 9.(1.11) EHR-1.(1.0).0(1.0) EHR-1 0.0(1.11).(1.) EHR-1.(1.0).0(1.) EHR-1.0(1.) 9.(1.) Material Nylon, UL9V-0, natural (white)
Shrouded header The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors (see page 1). Top entry ( circuits).(.10) Top entry Side entry Dimensions mm.(in) Top entry box Side entry.(.1).0(.).(.10) 0. (.0). 1.(.0).0(.).(.10) ( to 1 circuits).. 0. (.0).(.1).1(.01).(.10) 1.(.0) 9 10 11 1 1 1 1 -EH- -EH- -EH- -EH- -EH- -EH- -EH- 9-EH- 10-EH- 11-EH- 1-EH- 1-EH- 1-EH- 1-EH- S -EH S -EH S -EH S -EH S -EH S -EH S -EH S 9-EH S10-EH S11-EH S1-EH S1-EH S1-EH S1-EH.(.09).0(.19).(.9) 10.0(.9) 1.(.9) 1.0(.91) 1.(.9) 0.0(.).(.).0(.9).(1.0) 0.0(1.11).(1.0).0(1.).(.9) 10.0(.9) 1.(.9) 1.0(.91) 1.(.9) 0.0(.).(.).0(.9).(1.0) 0.0(1.11).(1.0).0(1.).(1.) 0.0(1.) Post: rass, copper-undercoated, tin/lead plated Wafer: Nylon, UL9V-0, natural (white) 1. lso available and identified as model xx-eh is a top entry having a post extension length of.0mm(.1"). Top entry headers are not TÜV approved. Side entry.(.1).0(.1).0(.).(.0).(.).. 0. (.0). (.0). (.1) PC board layout (viewed from soldering side) and ssembly layout Top entry Side entry.±0.0 (.09±.00).min..min. (.0) 0.9 + 0.1 0 (.0 +.00 0 )dia.. (.10).(.9) 0.(.0).±0.0 (.09±.00) 1.9min. (.0).min. (.) 0.9 + 0 0.1 (.0 +.00 0 )dia. 9.(.).(.). (.1) 1. Tolerances are non-cumulative:±0.0mm(±.00" ) for all centers.. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR- are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details.
Shrouded header on radial-tape <Taping specifications conform to EIJ-RC-100 and JIS C00.> The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors (see page 1). Shrouded headers on radial-tape are not TÜV approved. TS ( circuits).(.9).. (.) [1.0(.09)] 1.(.09).(.1) (.1).(.0) 0.(.0) dia. box -EH-TS - - 1,00 -EH-TS.0(.19) 10.0(.9) 1,00 -EH-TS.(.9) 1.(.9) 00 -EH-TS 10.0(.9) 1.0(.91) 00 -EH-TS 1.(.9) 1.(.9) 00 -EH-TS 1.0(.91) 0.0(.) 00 -EH-TS 1.(.9).(.) 00 Pin: rass, copper-undercoated, tin/lead-plated Wafer: Nylon, UL9V-0, natural (white) ( to circuits).. 0.(.0) dia. (.1).(.0) 1.(.09) [1.0(.09)].(.110).(.0) 0.(.0) dia. TV.. 0.(.0).(.110).(.0) (.1).(.0) [0.(.0) dia.] [0.(.0) dia.] box -EH-TV.0(.19) 10.0(.9) 1,00 -EH-TV.(.9) 1.(.9) 00 -EH-TV 10.0(.9) 1.0(.91) 00 -EH-TV 1.(.9) 1.(.9) 00 -EH-TV 1.0(.91) 0.0(.) 00 -EH-TV 1.(.9).(.) 00 Post: rass, copper-undercoated, tin/lead-plated Wafer: Nylon, UL9V-0, natural (white)
R EH CONNECTOR Taping specifications and circuits:1.(.) to circuits:.(1.000) 0.0(.) 9.0(.) 1.0(.09).0 (.) circuits:.1(.01) to circuits:.(.1) circuits:. to circuits:.0(.19) 1.(.).0 (.1)dia. Conforms to JIS C0. Packaging specifications D Distance between the end of the tape and the first connector's center line (either end) H TERMINLS & CONNECTORS Tail tape Lead tape W Package Distance between folds ox size Flat pack (zigzag folded) indexing holes per fold (0.mm/1") (1xx0mm)1."(W)x1."(D) x1.0"(h) Distance between the end of the tape and the first connector s center line (either end) 19.0mm(.0") PC board layout (viewed from soldering side) and ssembly layout.±0.0 (.09±.00).min. (.1).min. (.0) 0.9 + 0 0.1 (.0 +.00 0 )dia..(.9) 1. Tolerances are non-cumulative:±0.0mm(±.00" ) for all centers.. Hole dimensions differ depending on the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.