Made in USA AUTOMOTIVE INDUSTRIAL MARINE
Passenger Car Motor oil EURO SYN MOTOR OIL 5W40 (Full Synthetic) * Excellent oxidation stability supports extended service intervals * Formulated exclusively with premium synthetic base stocks for maximum resistance to thermal breakdown * Resistance to sludge formation and piston deposits * European OEM approved performance for new vehicles under warranty * API Service Category SN/CF * ACEA A3/B4-10 & A3/B3-10 / BMW LL-01 / Mercedes Benz 229.3 & 229.5 * Porsche A40 /* Volkswagen 501.01, 502.00 & 505.00 * Renault RN0700 & RN0710 PREMIUM-Blend Motor Oil 5W20/5W30/10W30/ 10W40/20W50 (Synthetic Blend) * Maintains maximum engine protection under severe operating conditions * CleanGuard technology maintains engine cleanliness and protects against sludge and piston deposits * ILSAC GF-5 & API Service Category Resource Conserving SN * Chrysler; MS-6395 (Revision S) * Ford; WSS-M2C945-A (5W-20) & WSS-M2C946A (5W-30) * General -Motors; GM6094M (Obsolete) SUPER SYN Motor Oil 0W20/5W20/5W30/10W30 (Full Synthetic) * Formulated with select 100% synthetic base stocks for maximum resistance to thermal breakdown * Advanced additive technology provides added resistance to sludge formation and piston deposits * ILSAC GF-5 & API Service Category Resource Conserving S * Chrysler MS-6395 (Revision S) * Ford WSS-M2C945-A (5W-20) & WSS-M2C946A (5W-30) * General Motors GM6094M (Obsolete) Z-5 SUPER SYN (DEXOS) Motor Oil (Full Synthetic) * Optimum wear protection as defined by GM s Opel RNT camshaft test * Approved and licensed for GM Warranty Service as a dexos1 Motor Oil * Formulated with 100% synthetic base stocks for maximum resistance to thermal breakdown * ILSAC GF-5 & API Service Category Resource Conserving SN * Chrysler MS-6395 (Revision S) / Ford WSS-M2C946A * General Motors dexos1 License Number: RR1C0501079 * Backward Compatible for GM6094M & GM4718M Performance Standards (Obsolete)
Passenger Car Motor oil HD Multi-Grade Engine Oil 15W40 CI-4/SL * Maintains excellent soot control throughout oil life-cycle * Protects pistons from carbon deposits * Excellent TBN retention * Supports extended service intervals * Active anti-wear additives protect critical engine parts for wear * Advanced dispersants keep soot in suspension and reduces soot thickening in extended intervals * Shear-stable viscosity modifiers provide stay in grade protection * Exceeds API Service CI-4, CH-4, CG-4, CF-4 & SL, SJ, SH, * Exceeds ACEA E3-96 Issue 3, E5-99, & B3-98 standards, * Exceeds Engine Manufacturer Performance Requirements for- Cummins CES 20078, 20077, 20076,20071 & Mack EO-N, EO-M Plus, EO-M, EO-L Plus, EO-L & Detroit Diesel 92K214 & Mercedes Benz 228.1, Chrysler MS 6395-G & Ford ESE-M2C153-E & General Motors 6094-M & MIL-L-2104E, MIL-L- 46152E(obsolete) & Allison C4 & Caterpillar ECF-2 &TO-2 fluids, *Department of Defense CID-a-a-52306A2, A-A-52039A3 & Volvo VDS Hyper BLEND Multi-Grade Engine Oil 10W-30 CJ-4/SM * Optimum DPF service life and operation * OEM approved for late model engines SAE10W-30 HYPER BLEND MULTI GRADE 10W-30 * Technology proven in more than 2.5 Trillion Miles of heavy-duty engine operation API-CJ4/SM * Synthetic-blend formulation delivers optimum fuel economy with outstanding wear protection * CleanGuard technology maintains engine cleanliness and extends the service life of DPF systems * High TBN formulation and excellent TBN retention maximize protection in extended drain internals * Exceeds API Service Categories CJ-4, CI-4 Plus, CI-4, CH-4, CG-4, CF-4 & (gasoline engines) SM, SL, SJ, SH * Exceeds ACEA E7-08, E9-08 performance standards * Exceeds Engine Manufacturer Performance Requirements: Caterpillar ECF-2 & ECF-3, Cummins CES 20081, 20077, 20076, Detroit Diesel 93K218, Mack EO-O Premium Plus 07, EO-N, EO-M Plus, EO-M, Mercedes Benz 228.31, Allison C-4, Caterpillar TO-2, Volvo VDS-4, MAN M3275, MTU Type I & II, JASO DH-2, Renault Hyper ELITE Synthetic Engine Oil (FULL SYNTHETIC) 5W40/10W30/15W40 CJ-4/SM * Extended-Life Synthetic Technology * Optimum DPF service life and operation * Ultimate support of extended service intervals * Advanced technology proven in more than 2.5 Trillion Miles of heavy-duty engine operation * Exceeds API Service Categories CJ-4, CI-4 Plus, CI-4, CH-4, CG-4, CF-4 & SM, SL, SJ, SH (gasoline engines) * Exceeds ACEA E7-08, E9-08 performance standards * Exceeds Engine Manufacturer Performance Requirements: Caterpillar ECF-1, ECF-2 & ECF-3, Cummins CES 20081, Detroit Diesel 93K218 & 93K214, Mack EO-O Premium Plus 07, Mercedes Benz 228.3 & 228.31, MTU Type II, Chrysler MS 6395-G, Ford WSS-M2C171-E, MIL-L-2104E & MIL-L-46152E (obsolete), Allison C-4, Department of Defense CID-a-a-52306A2 & A-A-52039A3, Volvo VDS-4, MAN M3275, John Deere, Deutz DQC III-05, AGCO (Allis Chalmers), JASO DH-2, Renault RLD-3, Navistar (International), & Global DHD-1 10W-30 10W-30 API CJ-4/SM Hyper ULTRA Multi-Grade Engine Oil 10W-30 CJ-4/SM * Technology proven in more than 2.5 Trillion Miles of heavy-duty engine operation * CleanGuard technology maintains engine cleanliness and extends the service life of DPF systems APPLICATIONS * Exceeds API Service Categories CJ-4, CI-4 Plus, CI-4, CH-4, CG-4, CF-4 & (gasoline engines) SM, SL, SJ, SH * Exceeds ACEA E7-08, E9-08 performance standards * Exceeds Engine Manufacturer Performance Requirements: Caterpillar ECF-2 & ECF-3, Cummins CES 20081, 20077, 20076, Detroit Diesel 93K218, Mack EO-O Premium Plus 07, EO-N, EO-M Plus, EO-M, Mercedes Benz 228.31, Allison C-4, Caterpillar TO-2, Volvo VDS-4, MAN M3275, JASO
Automatic Transmission Fluid T-3 Automatic Transmission Fluid * Excellent frictional properties for smooth shifting * Excellent anti-shudder performance * Good seal compatibility * Protection against varnish and sludge formation * Superior thermal stability * Outstanding low-temperature performance Formulated with select base stocks for added resistance to thermal breakdown * Transmissions previously serviceable by GM DEXRON -III (H) and Ford MERCON brands * Allison C-4, Caterpillar TO-2 or Ford specifications M2C138-CJ and M2C166-H * Not recommended for use in transmissions requiring GM DEXRON -VI, Ford MERCON -V, MERCON SP & LV fluids, or Ford ATF Type F applications TS SUPER SYN Multi-Vehicle ATF * Optimum performance in GM 6-speed transmissions * Meets low-viscosity OEM transmission fluid requirements * Formulated with synthetic base stocks for maximum resistance to thermal breakdown * TS SUPER SYN Multi-Vehicle ATF meets the automatic transmission performance standards of GM DEXRON -VI, Ford Mercon LV & SP, Toyota & Lexus- WS, Nissan & Infinity Matic-S, Volvo STD 1273.41, Mercedes Benz 236.12, 236.14, 236.15 & 722.9 (NAG-2) and Hyundai & Kia SP4-M. It is also backward compatible for use in transmissions previously serviceable by DEXRON -III (H) brands. * NOT recommended for use in Continuously Variable Transmissions (CVT), Dual Clutch Transmissions (DCT) or applications that require a non-friction modified ATF, such as Ford Type F or Ford Type G (used in certain European transmissions). TS Global Synthetic Transmission Fluid * Optimum performance in GM 6-speed transmissions * Excellent performance in hybrid transmissions, including Ford and Toyota * One fluid for virtually every global transmission application * Meets low-viscosity OEM transmission fluid requirements * Formulated with synthetic base stocks for maximum resistance to thermal breakdown * ATF Type A - Suffix A / * Aisin Warner M315 Types A-1, AW-1, 3309 * Acura ATF-Z1, DW-1 (except CVTs) / *Alfa Romeo (all vehicles) * Allison C-3, C-4, TES-389 / * Daewoo LT 71141/ * Esso LT 71141* American Motors using ATF +3 (MS7176-E), ATF +4 (MS 9602) * Audi ZF, 5HP19FL, 5HP24A, LT71141, TL 52162, G-052-025-A2, G-052-162-A1, A2; G-052-182-A2, G-055-025-A2 * BMW 83 22 9 400 (272,275), 83 22 9 407 (765,807,858,859), 83 220 397 (114), ZF, 5HP (18FL, 19FL, 24A, 30), LA2634, ETL-7045E, ETL-8072B, N402, LT71141,* Caterpillar Power Shift TO-2 / * Honda ATFZ-1, DW-1 (except CVTs) * Chrysler ATF+3(MS7176-E), ATF+4 (MS 9602), Mopar AS68RC ATF * Daihatsu ALUMIX MULTI / * Fiat (all vehicles), Type TIV * Ford MERCON, MERCON (M506050501), MERCON V (XP-5-QM),MERCON SP (XT-6-QSP), MERCON LV (XT-10-QLV); WSS-M2C-138-CJ, 166-H, 185-A, 195-A, 202-B, WSS-M2C-910-A, 922-A1, 924-A (XT-8-QAW), Ford FNR5"GM DEXRON ; DEXRON II, II-E, III, III-G, III-H, VI; GM 986195; GM12378515; GM Transfer Case 12378396, 12378508 * Hyundai SP-II, SP-III, SP-IV, SPH-IV, NWS-9638 T-5, SP4-M / * Mini Cooper T-IV * Idemitsu K17, Jatco 3100 PL085 / * Infiniti Matic-D, Matic-J, Matic-K, Matic-S* Isuzu Besco ATF-II, ATF-III / * MAN 339A, F, V1, V2, Z1, Z2, Z3* Jaguar ZF 5HP24, LT71141, JLM20238, M1375.4, ATF 3403 M115 * JASO M315 Type 1-A / * Jeep (ATF +3, ATF +4) / * JWS 3309* Kia SP-II, SP-III, SP-IV, Red 1, SP4-M / * Lexus Type T, T-II, T-III, T-IV, WS* Mazda ATF-M III, ATF M-3, ATF-MV, V (XT-9-QMM5) * Mercedes Benz ZF 4HP20, 236.1, 236.2, 236.3(PSF), 236.5(C-4), 236.6,236.7, 236.8, 236.81, NAG-1, 236.9, 236.10, 236.11, 236.12, 236.14, 236.15 & 722.9 (NAG-2) * Mitsubishi Diamond SP II, SP III; Dia Queen J2 / * Nissan Matic-D, Matic-J, Matic-K, Matic-S * Opel 19 40 700, 19 40 707, 19 40 767 / * Peugeot ZF 4HP20* Porsche ZF 5HP19FL, ATF 3403-M115, T-IV / * Saturn: see GM listing* Renault (all vehicles), Renk-Doromat / * Scion (all vehicles) /* Vickers M-2950-S, I-286-S * SAAB 3309, 93 165 146, 93 165 147 (except those requiring Type F) * Shell 3403, 3353, LA 2634, M-1375.4 /* Subaru ATF, AT-HP/ * Suzuki ATF 3309, 3317 * Texaco ETL-7045E, ETL-8072B, N402/ * Toyota Type T-II, T-III, T-IV, WS* Voith G607 (55.6335.XX), G1363 (55.6336.XX), Turbo* Volvo 97340, 97341, 1161521, 1161540, T-IV, STD 1273.41 * VW ZF, 5HP19FL, 5HP24A, LT71141, TL 52162, G-052-025-A2, G-055-025-A2, G-052-162-A1, A2; G-052-182-A2, G-052-990-A2, G-055-005-A2, G-055-162, G-060-162-A2" * ZF, Ecomat; ZF TE-ML 02F, 03D, 04D, 05L, 09, 11B; ZF TE-ML 14,B,C,16L,17C
Made in USA API SN / ILSAC GF-5 Engine Protection Fuel Economy Max Power Gear Oil And Brake Fluid Gear oil MP Gear Lube (limited slip) 80W90/85W-140 * Superior wear protection for critical gear components * SAE grade 80W-90 can be formulated with limited-slip (LS) additive when specified * Resists deposit formation to protect seals from deterioration to prevent loss of fluid * API MT-1 * API GL-5 * Ford WSP-M2C197-A (80W-90 with LS) * MIL-PRF-2105E * PG-2 (LS) * MACK GO-J SYNTHETIC GEAR Lubricants 75W90 32/46/68 32 OZ / 946 ml SUPER SYN Gear Oil 75W90/75W140/80W140 (Full Synthetic) Power Stearing Fluid For use where DOT-3 MOTOR VEHICLE BRAKE FLUID is recommended by the manufacturer WET ERBP 284 of. MIN. * Meets: DOT-3 Specifcations * Meets: Federal Motor Vehicle Standard 116 * Suitable for both disc & drum brake systems SUPER SYN Gear Oil 75W90/75W140/80W140 (Full Synthetic) * Outstanding low-temperature shifting performance and cold start-ups * Formulated with proprietary Poly Alpha Olefin Synthetics for maximum resistance to thermal breakdown * Meets performance requirements for Dana/Eaton Roadranger 750,000 mile extended warranty program * SAE grades 75W-90 and 75W-140 are formulated with limited-slip (LS) additive * API Service GL-5 & MT-1 * U.S. Military MIL-PRF-2105E * Ford WSL-M2C192-A (75W-140) * Dana Corporation SHAES-256 * ArvinMeritor (Rockwell) O76-Q (extended drain), O-76-E (petrol), O-76-N (syn) * Mack GO-J & GO-J Plus * Eaton PS-163, PS-037 & PS-109; General Electric D50E9C; Harniscfeger (P& H) 474; Navistar TMS 6816; U.S. Steel 224 and AGMA Standard 250.03 Prime Food Grade Hydraulic Oil 32/46/68/100/ 220/460 (KOSHER/ FDA) * Maximum resistance to system foaming, rust, and oil oxidation * Exceed FDA 21 CFR 178.3570 standard for lubricants with the possibility if incidental contact with food * NSF registered for Incidental Food Contact (H1) * Certified to ANSI/NSF Standard 60, Drinking Water Treatment Chemicals (ISO Grade 32) * Produced under supervision of and Kosher approved by the Union of Orthodox Jewish Congregations of America * Formulated with high molecular weight polymers for optimum high-temp performance (ISO Grades 100, 220, 460) * Odorless, tasteless, colorless, and non-staining * Prime FG Hydraulic Oil 32, 46, 68, & 100 are general purpose lubricants recommended for hydraulic systems and circulating systems in machinery used to process, package, bottle, can, or transport food for human consumption. They meet performance standards for Denision HF-O, HF-1 & HF-2, Sperry Vickers M-2950-S & I-286-S, and Cincinnati Milacron P-68, P-69, and P-70. They also provide a viable option for hydraulic applications near environmentally sensitive areas such as bodies of water, national parks, recreational areas, amusement parks, elevators, and in-ground hydraulic reservoirs. * Prime FG Gear Oil 220 & 460 are specially formulated light-duty gear oils developed for use in worm gears, spur gears, and valves found in machinery used to process, package, bottle, or transport food for human consumption.
Premium Tractor & Hydraulic HYPER 6000-AW-68 HYDRAULIC OIL Hyper 6000 AW Hydraulic Oil 32/46/68/100 * Maximum protection and peak performance under heavy-loads * Maintains excellent water separating properties * Formulated with highly-refined base stocks for ultimate resistance to thermal breakdown * Clean Guard technology maintains engine cleanliness and protects against sludge and piston deposits * Parker Hannifin (Denision) HF-O, HF-1, HF-2, & T6H2OC * Eaton Vickers 35VQ25A Pump, M-2950-S, & I-286-S * Cincinnati Milacron P-68, P-69, & P-70* DIN 51524-2 Bio Degradable Sky Blue AW Hydraulic Oil 32/46/68 * Exceptional oxidation, rust, corrosion and foam resistance * Safe for use in applications containing yellow metal gear components * Meets Static Sheen requirements (EPA 40 CFR) * Meets EPA LC50 Saltwater Standards * Non-toxic classification per reporting requirements * Inherently biodegradable (ASTM D5864 Standards) * Fully recyclable (vegetable based fluids are not) * Dyed BLUE to differentiate from non-environmentally friendly fluids * Provides optimum service life through 6,000+ hour oxidation stability performance (ASTM D-943) * Fully compatible with hydraulic oils that contain zinc; however mixing will mitigate environmental benefits * Parker Hannifin (Denision) HF-O, HF-1, HF-2, & T6H2OC * Eaton Vickers 35VQ25A Pump, M-2950-S, & I-286-S3 * Cincinnati Milacron P-68, P-69, & P-70 * U.S Steel 126 & 127 * DIN 51 524, Part 2* AFNOR 48-603 (HM), 48-690 (Dry), 48-691 (wet filtration tests) TRACTOR FLUID J-20 A 303 Tractor Fluid J20A (303) * Excellent wear protection * Smooth clutch and PTO performance * Excellent anti-shudder performance * Good seal compatibility * Protection against rust and oxidization * Multi-purpose lubricant applications * Formulated with highly-refined base stocks for added resistance to thermal breakdown * Field tested with proven performance * Recommended for use in ambient temperatures between 32 F and 104 F (0 C to 40 C) * John Deere: J14B,C, J20A, J20, Type 303 * International Harvestor Hy-Tran* Massey Ferguson M-1110* Allis Chalmers C-3* J.I. Case JIC-143* Ford New Holland ESN-M2C; 134B,C* Allison C-3* Oliver* White Q-1722 GREASE Hyper RED Premium Grease EP2 (Lithium Complex) * Aggressive EP and anti-wear agents protect critical components under extreme load * Outstanding resistance to corrosion extends equipment life * NLGI certification GC-LB multi-purpose application for wheel bearing and heavy-duty chassis lubrication * Excellent four-ball wear and EP performance delivers maximum protection in severe applications * Select lithium complex thickener delivers optimum high-temperature performance * Special polymers deliver desired tackiness to prevent bearing drop out and resist water washout Hyper RED Premium Grease EP 2 is recommended for use in a wide range of automotive, heavy-duty trucking, construction, agriculture, mining and industrial service applications including: * Disc and drum brake wheel bearings * Industrial ball and roller bearings * Heavy-duty chassis and ball & universal joint lubrication * Boat trailer & 5th wheel lubrication * Conveyer bearings & equipment hinge pins
GREASE, ANTIFREEZE & COOLANTS Multipurpose Lithium Grease MP Lithium grease is recommended for use in automotive, agricultural, industrial and general-purpose applications operating under moderate temperatures Automotive drum brake wheel bearings Plain, rolling-element, antifriction and needle bearings Automotive chassis and ball & universal joint lubrication General-purpose agricultural equipment Multi-purpose industrial lubrication 5th wheel lubrication Centralized grease lube systems NOT RECOMMENDED FOR DISK BRAKE WHEEL BEARINGS ANTI-FREEZE COOLANTS ENGINE PROTECTOR ENGINE PROTECTOR HEAVY DUTY HEAVY DUTY ANTI FREEZE ANTI FREEZE APPLICATIONS Oxidation inhibitors maintain maximum protection in extended service NLGI Certification ASTM D 4950 LB NLGI certification LB multi-purpose use Excellent EP and wear protection for a broad range of service applications outstanding low-temperature pump ability Resists oil separation and throw out from antifriction bearings Compatible with other lithium based greases MolyCAT Grease EP2 3% / 5% DO NOT ADD WATER READY TO USE 50/50 For use in ALL MAKES & MODELS, Foreign & Domestic, cars and light trucks. Mix with all colors and brands of antifreeze/coolants for up to 5 years or 150,000 miles. Warning: Keep out of reach of children and animals ORGANIC ACID TECHNOLOGY Made in USA 1 GALLON/3.78 Ltr HEAVY DUTY For use in ALL MAKES & MODELS, Foreign & Domestic, cars and light trucks. Mix with all colors and brands of antifreeze/coolants for up to 5 years or 150,000 miles. Warning: Keep out of reach of children and animals ORGANIC ACID TECHNOLOGY Made in USA 1 GALLON/3.78 Ltr HEAVY DUTY * 3% Moly composition meets Caterpillar equipment grease service requirements * Aggressive EP and anti-wear agents protect critical components under extreme load * Excellent high-temperature performance provides resistance to grease softening * Oxidation inhibitors maintain maximum protection in extended service * NLGI certification GC-LB multi-purpose application for wheel bearing and heavy-duty chassis lubrication * Excellent four-ball wear and EP performance delivers maximum protection in severe applications * Balanced base oil viscosity resists separation while maintaining optimum grease pumpability * Special polymers deliver desired tackiness to prevent bearing drop out and resist water washout APPLICATIONS MolyCAT Grease EP 2 is recommended for use in slow-speed, high-temperature and heavy-load applications found in heavy-duty equipment used in construction, mining and earth moving including: * Disc and drum brake wheel bearings * Slow-speed, heavy-loaded bearings found in mining, construction and off-road equipment * Heavy-duty chassis and ball & universal joint lubrication * Ball and roller bearings * 5thtt wheel lubrication Grease Pack Size Available: 14 Oz 50/14 Oz.(400gms) / 35 lbs (16 Kgs) 120 Lbs (54.5Kg) 400 lbs (181.5 Kg) ENGINE PROTECTOR ENGINE PROTECTOR ANTI FREEZE ADD WATER ANTI FREEZE DO NOT ADD WATER READY TO USE 50/50 For use in ALL MAKES & MODELS, Foreign & Domestic, cars and light trucks. Mix with all colors and brands of HYBRID ORGANIC ACID TECHNOLOGY antifreeze/coolants for up to 5 years or 150,000 miles. Warning: Keep out of reach of children and animals Made in USA 1 GALLON/3.78 Ltr For use in ALL MAKES & MODELS, Foreign & Domestic, cars and light trucks. Mix with all colors and brands of antifreeze/coolants for up to 5 years or 150,000 miles. Warning: Keep out of reach of children and animals HYBRID ORGANIC ACID TECHNOLOGY Made in USA 1 GALLON/3.78 Ltr
PREMIUM QUALITY LUBES & OIL GREASE MADE IN U.S.A 3 GALLON/3.78 Ltr 3 GALLON/3.78 Ltr Distributed By Corporate Office: GLOBAL PETROCHEM LLC 10301- North West Freeways # 312 Houston, TX 77092 (USA) Tel: +1 7136862007 Dubai Contact: ALLIANCE ENERGY GROUP Unit 3203, Jumeirah Bay Tower, X3 J.L.T. Dubai (U.A.E.) Tel: +971 45515537 Email: sales@lotuslubes.com