Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com
2 C GOLDEN EDITION Machine dimensions 85 33 12 185 11 1835 1) 194 2) 215 / 435 3) 64 5 min. 21 max. 385 8 385 64 22 515 2665 318 max. 2985 1) max. 3111 2) Electrical connection Cooling water connection 1475 121 825 135 143 R39 1) Injection unit 2) Injection unit 1 3) Conveyor belt 2
Technical data 2 C GOLDEN EDITION Clamping unit 2 C GOLDEN EDITION with clamping force max. kn 4 Opening force stroke max. kn mm 13 35 Mould height, fixed variable min. mm 2 --- Platen daylight fixed variable max. mm 55 --- Distance between tie bars (w x h) mm 2 x 2 Mould mounting platens (w x h) max. mm 446 x 446 Weight of movable mould half max. kg 18 Ejector force stroke max. kn mm 3 125 Dry cycle time EUROMAP ² min. s - mm 1,2-189 Injection unit with screw diameter mm 18 22 25 2 1 25 3 Effective screw length L/D 24,5 2 17,5 25 2 16,7 Screw stroke max. mm 9 1 Calculated stroke volume max. cm³ 23 34 44 31 49 71 Shot weight max. g PS 21 31 4 29 45 65 Material throughput max. kg/h PS 4,1 5,5 6,5 5,5 8 9,5 max. kg/h PA6.6 2,1 2,8 3,3 2,8 4 4,9 Injection pressure max. bar 25 2 155 25 2 139 Holding pressure max. bar 25 2 155 25 2 139 Injection flow ² max. cm³/s 68 1 13 64 1 146 Screw circumferential speed ² max. m/min 39 48 55 28 35 42 Screw torque max. Nm 9 11 12 12 15 18 Nozzle contact force retraction stroke max. kn mm 5 15 5 18 Heating capacity zones kw 4,1 4 4,9 5 Feed hopper l 25 5 Drive and connection with injection unit 2 pumps 1 Net weight of machine kg 215 218 Sound press. level Insecurity ⁴ db(a) 68 3 Oil filling l 165 Drive power ² max. kw 7,5 11 Electrical connection ³ kw 14 19 Total A 5 63 Machine A --- --- Heating A --- --- Cooling water connection max. C 3 min. Δp bar 1,5 DN 25 Machine type with EUROMAP size designation ¹ 2 C GOLDEN EDITION 4-1 All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (kn) - large injection unit = max. stroke volume (cm³) x max. injection pressure (kbar) 2) Specifications depend on the drive variant / drive configuration. 3) Specifications relate to 4 V/5 Hz. 4) Detailed info in the operating instr. [ ] Specifications apply to alternative equipment. 3
2 C GOLDEN EDITION Mould installation dimensions Stroke max. 125 21-1 C E X Ø125H7 Y 233 D B A max. 4 25 Stroke max. 35 min. 2 3 max. 55 935 Ejector bolt X Bore in mould (if required) Y 38.5 Ø24-.1 Ø18 Ø24 Ø8 3 3 2 17 Ø25 Ø5 1-.1 C-D view Robotic system mounting E M8-16 deep 15 42 28 2 1 85 15 21 M12-24 deep in cylinder platen for mechanical ejector 17.5 52.5 M12-24 deep 4
Mould installation dimensions 2 C GOLDEN EDITION Fixed mould mounting platen A 14 21 28 35 64 455 1 15 55 4 455 315 2 466 233 Ø25 Ø45 Ø125H7 2 35 28 21 14 53 M12-24 deep Moving mould mounting platen B M8-16 deep for robotic system 2 315 72 Useful clamping surface when pulling the tie rods 4 5
2 C GOLDEN EDITION Shot weights Theoretical shot weights for the most important injection moulding materials Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS 1) Cellulose acetate max. g CA 1) Celluloseacetobutyrate max. g CAB 1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 PA 6 1) max. g PA 6.1 PA 11 1) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE 1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P 1) 18 22 25 21 31 4 2 31 39 2 3 39 24 35 45 22 33 42 22 32 42 19 29 37 22 33 42 23 34 44 21 31 4 19 29 37 26 39 5 25 37 48 16 24 3 16 24 31 17 25 32 33 5 65 29 44 57 25 38 49 23 35 45 1 2 25 3 29 45 65 28 44 63 27 43 62 32 5 73 3 47 68 3 46 67 27 42 6 3 47 68 31 49 28 44 64 26 41 6 35 55 8 34 53 77 22 34 49 22 35 5 23 36 51 46 72 13 4 63 91 35 54 78 32 5 72 1) average value ARBURG GmbH + Co KG Arthur-Hehl-Strasse 7229 Lossburg Tel.: +49 7446 33- www.arburg.com E-Mail: contact@arburg.com With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to www.arburg.com. 217 ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO 91 + 141 + 51 certified 5236_EN_GB_3217 Subject to alterations