NEW PRODUCTS MOULD MAKING II / 2016 Order now from our online shop! www.meusburger.com E 3330 and E 3360 Compact slide units High-precision and ready-to-use compact slide units with extremely slim design for smallest installation spaces E 3360 Maximum process safety guaranteed through highest precision For even the smallest installation spaces due to the extremely slim design High wear resistance and best sliding properties due to DLC coated slides Easy adjustment of slide preload by means of a provided shim E 3330
DLC coated latch locks The tried and trusted, reliable latch locks have been improved with DLC coated switching elements. This enables an even longer life and their use in cleanrooms through best dry-running properties. E 1820 E 1840 E 1820 FLAT LATCH LOCK E 1840 ROUND LATCH LOCK Compact design with optimal force transmission through stable, large surface latches Secure locking of the floating plate in three-plate moulds Accurate switching through precise control cams Easy creation of the required installation space through machining in one set-up Smooth and quiet operation through integrated damper No protruding attachments on the mould base E 1524 Ejector set accelerator For two-stage control of the ejector set Easy solution for producing an additional stroke with just one movement of the ejector set The compact and robust design makes it suitable for small installation spaces < << Available in 4 different sizes so it can be installed in both small and large moulds +
E 1251 Thrust piece with thread lock The nylon insert offers protection against self-loosening of the thrust piece High loosening torque which is maintained even after repeated screwing and unscrewing No additional pieces required for fixing and easily interchangeable with the E 1250 and E 1252 thrust pieces Round wire system compression springs Now also available in diameters 10, 12.5 and 16 mm Optimal for applications with limited installation space Easy recognition of the spring force through different colours Easily interchangeable through identical fitting dimensions WE CHEAPER IN LARGE QUANTITIES REWARD YOU! SYSTEM COMPRESSION SPRINGS We reward you for orders from 50 pieces with unbeatable offers! Special offer valid until 31.12.2016. Get more information or order now via our online shop. + iscover the many D ordering options!
Tunnel gate inserts for large contour steps Additional fields of application through new tunnel geometries Easy and fast creation of tunnel gates with large contour steps Very good flow properties through optimal surface inside the channel E 1693 TUNNEL GATE INSERT, HIGH-LEVEL CONTOUR For gating points which are located behind a step or fillet or above the split line face E 1693 E 1694 TUNNEL GATE INSERT, LOW-LEVEL CONTOUR For gating points which are located below the split line face E 1694 E 1352 Centring unit, flat-face Best sliding properties and high wear resistance through the DLC coating Easy introduction and positioning enables high centring accuracy Ideally suited when processing materials with non-uniform thermal expansion Meusburger Georg GmbH & Co KG Kesselstr. 42 6960 Wolfurt Austria T +43 5574 6706-0 F -11 sales@meusburger.com www.meusburger.com
E 2766 Cable retainer, magnetic Universally usable cable holder for the easy and secure fixing of the cable in the slot Easy installation by means of Neodymium magnets Very simple incorporation using a milling cutter Ø12 mm no time-consuming tapping required Temperature resistance up to 150 C enables the use in moulds with hot runner systems Socket housing in high design Tried and trusted high-quality socket housings now also available in high design Many application possibilities of industrial connectors through complete range in high design For extreme operating conditions through robust housing out of die cast aluminium Compatible to our existing male and female inserts E 65620 Magnetic proximity sensor for T-slots Through reliable and precise switching point ideally suited for use as cylinder sensor Precise adjustment by means of flashing signal threshold alarm and continuous light in the optimal switching range Secure and easy fixing inside the T-slot Compatible with: E 7020 Compact cylinder for magnetic proximity sensor
Expansion of the range of hydraulic cylinders Hydraulic cylinders now available from stock with stroke up to 200 mm Large application range through finely graduated stroke lengths up to 200 mm Long life through hardened and double sealed piston rod Standard equipped with FKM (Viton ) seals, suitable for temperatures up to 180 C E 2480 Mechanical cycle counter with extension Can be shortened to the required length due to the screwed in extension piece Space-saving installation in the area of the retainer plate or next to the risers Reliable operation for up to 10 million switching cycles Available ly at exclusive ger Meusbur E 2030 Marking chips for cooling connections Marking chips for cooling connections now available up to IN 32 / OUT 32 For professional and high-quality marking of cooling circuits Flush-mountable, non-protruding plastic chips Incorporation of the recess in a matter of seconds with WZB 119225 Step drill, from carbide + Discover the many ordering options!