OSQ Series OSQ LED Area/Flood Luminaire Large Product Description DA Mount The OSQ Area/Flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built to last, the housing is rugged cast aluminum with an integral, weathertight LED driver compartment. Versatile mounting configurations offer simple installation. Its slim, low-profile design minimizes wind load requirements and blends seamlessly into the site providing even, quality illumination. The T input power designator is a suitable upgrade for HID applications up to 70 Watts, and the U input power designator is a suitable upgrade for HID applications up to000 Watts. Applications: Parking lots, walkways, campuses, auto dealerships, office complexes, and internal roadways formance Summary NanoOptic Precision Delivery Grid optic 7." (69mm) 8." (0mm) Assembled in the U.S.A. of U.S. and imported parts Lumens: Up to 7,03 9.0" (48mm) Efficacy: Up to 39 LPW CRI: Minimum 70 CRI CCT: 3000K (+/- 300K), 4000K (+/- 300K), 700K (+/- 00K) Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish See http://lighting.cree.com/warranty for warranty terms Accessories Field-Installed 3.8" (97mm) 3." (79mm) NEMA Photocell Receptacle location (ordered as an option) 4.8" (mm) Backlight Shield OSQ-BLSLF Front facing optics OSQ-BLSLR Rotated optics Hand-Held Remote XA-SENSREM - For successful implementation of the programmable multi-level option, a minimum of one hand-held remote is required Ordering Information Fully assembled luminaire is composed of two components that must be ordered separately: Example: Mount: OSQ-AASV + Luminaire: OSQ-A-NM-ME-T-40K-UL-SV Weight 8. lbs. (3kg) Mount (Luminaire must be ordered separately)* OSQ-AA Adjustable Arm OSQ-DA Direct Arm Color Options: SV Silver BK Black BZ Bronze WH White * Reference EPA and pole configuration suitability data beginning on page 7 Luminaire (Mount must be ordered separately) OSQ A NM Product Version Mounting Optic CCT Voltage Color Options Options OSQ A NM No Mount Asymmetric ME* Type II Medium 3ME* Type III Medium 4ME* Type IV Medium Symmetric ME Type V Medium SH Type V Short WSN Wide Sign D Flood D Flood 40D 40 Flood 60D Flood T 66W U W 3000K 40K 4000K 7K 700K UL Universal 0-77V UH Universal 347-480V BK Black BZ Bronze SV Silver WH White DIM 0-0V Dimming --Control by others --Refer to Dimming spec sheet for details --Can't exceed wattage of specified input power designator F Fuse --When code dictates fusing, use time delay fuse --Available for U.S. applications only ML Multi-Level --Refer to ML spec sheet for details --Available with UL voltage only --Intended for downlight applications at 0 tilt PML Programmable Multi-Level, up to Mounting Height --Refer to PML spec sheet for details --Intended for downlight applications at 0 tilt PML Programmable Multi-Level, 0-3 Mounting Height --Refer to PML spec sheet for details --Intended for downlight applications at 0 tilt Q9/Q8/Q7/Q6/Q/Q4/Q3/Q/Q Field Adjustable Output -- Must select Q9, Q6, Q, Q4, Q3, Q, or Q for T input power designator -- Must select Q9, Q8, Q7, Q6, Q, Q4, Q3, Q, or Q for U input power designator -- Offers full range adjustability -- Refer to pages 9-0 for power and lumen values R NEMA Photocell Receptacle --Intended for downlight applications with maximum 4 tilt --3-pin receptacle per ANSI C30 --Photocell and shorting cap by others RL Rotate Left --LED and optic are rotated to the left RR Rotate Right --LED and optic are rotated to the right * Available with Backlight Shield when ordered with field-installed accessory (see table above)
Product Specifications CONSTRUCTION & MATERIALS Slim, low profile design minimizes wind load requirements Luminaire housing is rugged die cast aluminum with an integral, weathertight LED driver compartment and high performance heat sink Convenient interlocking mounting method on direct arm mount. Mounting adaptor is rugged die cast aluminum and mounts to 3-6" (76-mm) square or round pole, secured by two /6-8 UNC bolts spaced on " (mm) centers Mounting for the adjustable arm mount adaptor is rugged die cast aluminum and mounts to " (mm) IP,.37" (6m) O.D. tenon Adjustable arm mount can be adjusted 80 in. increments Designed for uplight and downlight applications Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Silver, bronze, black, and white are available Weight: 8. lbs. (3kg) ELECTRICAL SYSTEM Voltage: 0-77V or 347-480V, 0/60Hz, Class drivers Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Integral 0kV surge suppression protection standard When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current 0V Source Current: 0.mA REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations Enclosure rated IP66 per IEC 609 when ordered without R option Consult factory for CE Certified products Certified to ANSI C36.3-00, 3G bridge and overpass vibration standards 0kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Meets FCC Part, Subpart B, Class A standards for conducted and radiated emissions Luminaire and finish endurance tested to withstand,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 Meets Buy American requirements within ARRA DLC and DLC Premium qualified versions available. Some exceptions apply. Please refer to https://www.designlights.org/search/ for most current information RoHS compliant. Consult factory for additional details Dark Sky Friendly, IDA Approved when ordered with CCT. Please refer to http://darksky.org/fsa/fsa-products/ for most current information Electrical Data* System Watts 0-480V Total Current (A) 0V 08V 40V 77V 347V 480V T 66.4 0.83 0.7 0.6 0.49 0.3 U.83.08 0.93 0.8 0.6 0.4 * Electrical data at C (77 F). Actual wattage may differ by +/- 0% when operating between 0-480V +/-0% OSQ Series Ambient Adjusted Lumen Maintenance Ambient C (4 F) 0 C (0 F) C (9 F) 0 C (68 F) C (77 F) Optic LMF K hr Projected LMF 0K hr Projected LMF 7K hr Projected / Calculated 3 LMF Asymmetric.04.00 0.9 0.9 3 0.87 3 Symmetric.0.04.03.03.0 Asymmetric.03 0.99 0.94 0.90 3 0.86 3 Symmetric.04.03.0.0.00 Asymmetric.0 0.98 0.93 0.89 3 0.86 3 Symmetric.0.0.0.00 0.99 Asymmetric.0 0.97 0.93 0.89 3 0.8 3 Symmetric.0.0.00 0.99 0.98 Asymmetric.00 0.96 0.9 0.88 3 0.84 3 Symmetric.00 0.99 0.98 0.98 0.97 00K hr Projected / Calculated 3 LMF Lumen maintenance values at C (77 F) are calculated per TM- based on LM-80 data and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumen maintenance factors In accordance with IESNA TM--, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM--, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) AA Mount 9.8" (77mm) 0.6" (7m) Weight 8. lbs. (3kg) 9.0" (48mm) 3." (79mm) NEMA Photocell Receptacle location (ordered as an option) 3.8" (97mm)
Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/osq-series ME 834 06 78 6... Type II Medium Distribution 4.7 4.7 T 0,688 B3 U0 G3,90 B3 U0 G3,330 B3 U0 G3 U,46 B3 U0 G3 6,83 B3 U0 G3 7,03 B3 U0 G3 CESTL Test Report #: PL0770-00A OSQ-A-**-ME-U-40K-UL Lumens: 6,946 34 6007 067 336 OSQ-A-**-ME-U-40K-UL Mounting Height: ' (7.6m) A.F.G. Lumens: 6,83 FC at grade... 4.7 4.7 * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf. Valid with no tilt Type II Medium Distribution T,897 B U0 G 6,830 B3 U0 G 7,9 B3 U0 G U 9,400 B3 U0 G 0,47 B3 U0 G 0,86 B3 U0 G CESTL Test Report #: PL07700-00A OSQ-A-**-ME-U-7K-UL w/osq-blslf Lumens:,8 OSQ-A-**-ME-U-40K-UL w/osq-blslf Mounting Height: ' (7.6m) A.F.G. Lumens: 0,47 FC at grade * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf. Valid with no tilt 3ME 7736 330 8868 4434... Type III Medium Distribution 4.7 4.7 T 0,688 B3 U0 G3,90 B3 U0 G3,330 B3 U0 G3 U,46 B3 U0 G3 6,83 B3 U0 G3 7,03 B3 U0 G3 CESTL Test Report #: PL07698-00A OSQ-A-**-3ME-U-40K-UL Lumens: 7,30 OSQ-A-**-3ME-U-40K-UL Mounting Height: ' (7.6m) A.F.G. Lumens: 6,83 FC at grade * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf. Valid with no tilt Type III Medium Distribution 780 334 8903 44... T 6,333 B U0 G 7,9 B U0 G 7,69 B U0 G3 4.7 4.7 U 9,93 B U0 G3 0,986 B U0 G3,397 B U0 G3 CESTL Test Report #: PL07699-00A OSQ-A-**-3ME-U-7K-UL w/osq-blslf Lumens: 3,60 OSQ-A-**-3ME-U-40K-UL w/osq-blslf Mounting Height: ' (7.6m) A.F.G. Lumens: 0,986 FC at grade * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf. Valid with no tilt
Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/osq-series 4ME 86 3887 98 469 CESTL Test Report #: PL07690-00A OSQ-A-**-4ME-U-40K-UL Lumens: 7,7 4... OSQ-A-**-4ME-U-40K-UL Mounting Height: ' (7.6m) A.F.G. Lumens: 6,83 FC at grade Type IV Medium Distribution T 0,688 B3 U0 G3,90 B3 U0 G3,330 B3 U0 G3 U,46 B4 U0 G3 6,83 B4 U0 G3 7,03 B4 U0 G3 * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf. Valid with no tilt 930 43 967 4838 CESTL Test Report #: PL0769-00A OSQ-A-**-4ME-U-7K-UL w/osq-blslf Lumens:,793 4... OSQ-A-**-4ME-U-40K-UL w/osq-blslf Mounting Height: ' (7.6m) A.F.G. Lumens: 0,47 FC at grade Type IV Medium Distribution T,897 B U0 G3 6,830 B U0 G3 7,9 B U0 G3 U 9,400 B3 U0 G3 0,47 B3 U0 G3 0,86 B3 U0 G3 * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf. Valid with no tilt ME 889 6669 4446 3 4... Type V Medium Distribution Pe CESTL Test Report #: PL0788-00A OSQ-A-**-ME-U--UL Lumens:,40 4.7 4.7 OSQ-A-**-ME-U-40K-UL Mounting Height: ' (7.6m) A.F.G. Lumens: 4,666 FC at grade T 0,3 B U0 G,469 B U0 G,84 B U0 G U 3, B U0 G 4,666 B U0 G,09 B U0 G * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf. Valid with no tilt SH 39 864 769 88 CESTL Test Report #: PL074-00A OSQ-A-**-SH-U-40K-UL Lumens:,679 4 4.7... 4.7 OSQ-A-**-SH-U-40K-UL Mounting Height: ' (7.6m) A.F.G. Lumens: 6,0 FC at grade Type V Short Distribution T,349 B U0 G3,67 B U0 G3 3,069 B U0 G3 U 4,7 B U0 G3 6,0 B U0 G3 6,04 B U0 G4 * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/07/03/ratingsaddendum.pdf. Valid with no tilt
Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/osq-series D 448 0864 Flood Distribution 748 364 0 0... T,349,67 3,069 4.7 48.8 4.9 U 4,7 6,0 6,04 CESTL Test Report #: PL07689-00A OSQ-A-**-D-U--UL Lumens: 3,4 OSQ-A-**-D-U-40K-UL Mounting Height: ' (7.6m) A.F.G., Tilt Lumens: 6,0 FC at grade * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered D 8889 667 Flood Distribution 444 07 0 0... 4.7 48.8 4.9 T,349,67 3,069 U 4,7 6,0 6,04 CESTL Test Report #: PL07687-00A OSQ-A-**-D-U--UL Lumens: 3,6 OSQ-A-**-D-U-40K-UL Mounting Height: ' (7.6m) A.F.G., Tilt Lumens: 6,0 FC at grade * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered 40D 403 403 70 308 0 0... 40 Flood Distribution 4.7 48.8 4.9 T,349,67 3,069 U 4,7 6,0 6,04 CESTL Test Report #: PL07697-00A OSQ-A-**-40D-U--UL Lumens:,943 OSQ-A-**-40D-U-40K-UL Mounting Height: ' (7.6m) A.F.G., Tilt Lumens: 6,0 FC at grade * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered
Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/area/osq-series 60D 489 9366 Flood Distribution 644 3 0... Lumens* Lumens* Lumens* 4.7 48.8 4.9 T,349,67 3,069 U 4,7 6,0 6,04 CESTL Test Report #: PL0800-00B OSQ-A-**-60D-B--UL Lumens: 0,079 OSQ-A-**-60D-U-40K-UL Mounting Height: ' (7.6m) A.F.G., Tilt Lumens: 6,0 FC at grade * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered WSN 337 0 7668 3834 0 4.7... Wide Sign Distribution T,349,67 3,069 4.7 4.748.8 4.9 6 67. 73. U 4,7 6,0 6,04 CESTL Test Report #: PL0769-00A OSQ-A-**-WSN-U--UL Lumens: 3,6 OSQ-A-**-WSN-U-40K-UL Mounting Height: ' (7.6m) A.F.G., tilt Lumens: 6,0 FC at grade * delivered at C (77 F). Actual production yield may vary between -0 and +0% of initial delivered
Luminaire EPA Fixed Arm Mount OSQ-DA Weight: 8. lbs. (3kg) Single @ 80 @ 3 @ 3 @ 4 @ 0.80.6.6.06.68. Adjustable Arm Mount OSQ-AA Weight: 8. lbs. (3kg) Single @ 80 @ 3 @ 3 @ 3 @ 80 4 @ 80 4 @ Tenon Configuration (0-80 Tilt); If used with Cree tenons, please add tenon EPA with Luminaire EPA PB-A*; PT-; PW- A3** 0 Tilt PB-A*; PB-R.37; PD-A4(80); PT-(80); PW-A3** PB-A*; PD-A4(90); PT-(90) PB-3A*; PD-3A4(90); PT-3(90) PB-3A*; PT-3(0) PB-3A*; PB-3R.37 PB-4A*(80) 0.80.6.6.06.68 3.33 4.66. 0 Tilt 0.8.6.6.4.3 4.40 6.08 3.4 0 Tilt.4.6.04.84 3.3.68 7.80 4.08 Tilt.64.64.44 3.4 3.97 6.88 9.40 4.88 4 Tilt.0.0 3.00 3.80.07 8..64 6.00 Tilt.63.63 3.43 4.3.73 9.84 3.36 6.86 70 Tilt.8.8 3.6 4.4.73 0.4 4. 7.4 80 Tilt.93.93 3.73 4.3.73 0.74 4.6 7.46 Tenon Configuration ( Tilt); If used with Cree tenons, please add tenon EPA with Luminaire EPA PB-A*; PT-; PW- A3** Tilt PB-A*; PB-R.37; PD-A4(80); PT-(80); PW-A3** PB-A* PB-3A* PB-3A*; PT-3(0) PB-3A*; PB-3R.37 PB-4A*(80).9.9 4.84 6..73 0.8 4.64.9 * Specify pole size: 3 (3"), 4 (4"), ("), or 6 (6") for single, double or triple luminaire orientation or 4 (4"), ("), or 6 (6") for quad luminaire orientation ** These EPA values must be multiplied by the following ratio: Fixture Mounting Height/Total Pole Height. Specify pole size: 3 (3"), 4 (4"), ("), or 6 (6") PB-4A*(90); PB-4R.37; PD-4A4(90); PT-4(90) PB-4A*(90); PB-4R.37
Tenon EPA Part Number EPA Tenons and Brackets (must specify color) PB-A* None PB-A* 0.8 PB-3A*. PB-4A*(80). PB-4A*(90). PB-R.37 0.9 PB-3R.37.6 PB-4R.37.3 PD Series Tenons 0.09 PT Series Tenons 0.0 PW-A3** 0.47 PW-A3** 0.94 WM- 0.08 WM-4 0. Square Internal Mount Vertical Tenons (Steel) - Mounts to 3-6" (76-mm) square aluminum or steel poles PB-A* Single PB-4A*(90) Quad PB-A* 80 Twin PB-4A*(80) 80 Quad PB-3A* 80 Triple Square Internal Mount Horizontal Tenons (Aluminum) - Mounts to 4" (0mm) square aluminum or steel poles PD-A4(90) Twin PD-3A4(90) Triple PD-A4(80) 80 Twin PD-4A4(90) Quad Wall Mount Brackets - Mounts to wall or roof WM- Horizontal for OSQ-AA mount WM-4 L-Shape for OSQ-AA mount WM-DM Plate for OSQ-DA mount Refer to the Bracket and Tenons spec sheet for more details Round External Mount Vertical Tenons (Steel) - Mounts to.37" (6m) O.D. round aluminum or steel poles or tenons PB-R.37 Twin PB-4R.37 Quad PB-3R.37 Triple Round External Mount Horizontal Tenons (Aluminum) - Mounts to.37" (6m) O.D. round aluminum or steel poles or tenons - Mounts to square pole with PB-A* tenon PT- Single (Vertical) PT-3(90) Triple PT-(90) Twin PT-4(90) Quad PT-(80) 80 Twin Mid-Pole Bracket - Mounts to square pole PW-A3** Single PW-A3** Double Ground Mount Post - For ground mounted flood luminaires PGM- - for OSQ-AA mount WM-DM None * Specify pole size: 3 (3"), 4 (4"), ("), or 6 (6") for single, double or triple luminaire orientation or 4 (4"), ("), or 6 (6") for quad luminaire orientation ** These EPA values must be multiplied by the following ratio: Fixture Mounting Height/Total Pole Height. Specify pole size: 3 (3"), 4 (4"), ("), or 6 (6") Direct Mount Configurations Compatibility with OSQ-DA Direct Mount Bracket @ @ 80 3 @ 3 @ 4 @ 3" Square T & U N/A ü N/A N/A N/A 3" Round T & U N/A ü N/A N/A N/A 4" Square T & U ü ü ü N/A ü 4" Round T & U ü ü ü ü ü " Square T & U ü ü ü N/A ü " Round T & U ü ü ü ü ü 6" Square T & U ü ü ü N/A ü 6" Round T & U ü ü ü ü ü
Field Adjustable Output (Q9/Q6/Q/Q4/Q3/Q/Q) Option Description: The Field Adjustable Output option enables the OSQ area luminaires to be tuned to the exact needs of a particular application through multiple levels of adjustment. When ordered with the Q option, the luminaire will be shipped from the factory at the selected Q setting and will be fully adjustable between the nine settings. Q Option & Lumen Data T Q Option Setting CCT System Watts Lumen Values 0-480V Asymmetric ME SH & Floods ME 3ME 4ME Optics Qualified on DLC QPL Standard Premium Q9 (Full ) 0,688 0,3,349,897 6,333,897 ME, D, D, 40D, 60D, WSN ME, 3ME, 4ME, SH 40K 66,90,469,67 6,830 7,9 6,830 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 7K,330,84 3,069 7,9 7,69 7,9 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 8,86 8,394 9,48 4,466 4,863 4,466 ME, D, D, 40D, 60D, WSN ME, 3ME, 4ME, SH Q6 40K 9,93 9,37 0,634,3,73,3 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 7K 0,30 9,876 0,993,6 6,04,6 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 6,964 6,7 7,06 3,036 3,393 3,036 ME, D, D, 40D, 60D, WSN ME, 3ME, 4ME, SH Q 40K 3 7,960 7,60 8,94 3,80 4,79 3,80 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 7K 8,3 7,90 8,97 4,070 4,46 4,070 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN,0 4,7,8,60,93,60 ME, D, D, 40D, 60D, WSN ME, 3ME, 4ME, SH Q4 40K,988,67 6,3,86,6,86 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 7K 6,30,94 6,840,6,869,6 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 3,033,734 3,40 0,0 0,90 0,0 ME, D, D, 40D, 60D, WSN ME, 3ME, 4ME, SH Q3 40K 96 3,798 3, 4,8 0,603 0,893 0,603 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 7K 4,068 3,760 4,33 0,80,06 0,80 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 0, 0,309 0,888 8,07 8,330 8,07 ME, D, D, 40D, 60D, WSN ME, 3ME, 4ME, SH Q 40K 79,70 0,949,64 8,83 8,88 8,83 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 7K,388,39,76 8,7 8,99 8,7 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 8,689 8,489 8,967 6,677 6,860 6,677 ME, D, D, 40D, 60D, WSN ME, 3ME, 4ME, SH Q/ 40K 8 9,99 9,07 9,4 7,069 7,6 7,069 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN 7K 9,379 9,74 9,689 7,07 7,404 7,07 N/A ME, 3ME, 4ME, ME, SH, D, D, 40D, 60D, WSN
Field Adjustable Output (Q9/Q8/Q7/Q6/Q/Q4/Q3/Q/Q) Option Description: The Field Adjustable Output option enables the OSQ area luminaires to be tuned to the exact needs of a particular application through multiple levels of adjustment. When ordered with the Q option, the luminaire will be shipped from the factory at the selected Q setting and will be fully adjustable between the nine settings. Q Option & Lumen Data U Q Option Setting CCT System Watts Lumen Values 0-480V Asymmetric ME SH & Floods ME 3ME 4ME Optics Qualified on DLC QPL Standard Premium Q9 (Full ),46 3, 4,7 9,400 9,93 9,400 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME 40K 6,83 4,666 6,0 0,47 0,986 0,47 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K 7,03,09 6,04 0,86,397 0,86 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME 3,6,364,6 7,848 8,337 7,848 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME Q8 40K 9 4,46,693 3,967 8,793 9,307 8,793 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K 4,93 3,087 4,384 9,60 9,68 9,60 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME,07 9,06 0,603 6,96 6,74 6,96 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME Q7 40K 7,330 0,79,883 7,9 7,68 7,9 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K,767,080,63 7,494 7,973 7,494 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME 9,439 7,88 8,886 4,938,347 4,938 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME Q6 40K 0,469 8,993 0,09,79 6,9,79 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K 0,869 9,33 0,408 6,036 6,476 6,036 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME 7,67 6, 7,69 3,80 3,9 3,80 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME Q 40K 33 8,608 7,66 8,36 4,99 4,690 4,99 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K 8,97 7,67 8,3 4,78 4,978 4,78 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME,400 4,6 4,96,834,8,834 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME Q4 40K 3 6,6,046,89,460,80,460 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K 6,33,308 6,67,704 3,0,704 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME 3,8,07,74 0,088 0,364 0,088 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME Q3 40K 94 3,83,86 3,47 0,6 0,93 0,6 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K 4,094 3,049 3,78 0,830,6 0,830 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME,08 0,8 0,79 8,36 8,770 8,36 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME Q 40K 77,697 0,83,46 8,988 9,34 8,988 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K,9,04,66 9,63 9,4 9,63 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME 7,74 6,967 7,38,80,979,80 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME Q 40K 3 7,97 7,400 7,8 6,8 6,96 6,8 3ME, ME, SH, D, D, 40D, 60D, WSN ME, 4ME 7K 8,3 7,9 7,9 6,48 6,49 6,48 ME, SH, D, D, 40D, 60D, WSN ME, 3ME, 4ME