1
At Astec Underground we are as proud of our service support as we are of our products. Your Astec dealer has skilled technicians to handle any service requirement with advanced diagnostics and the latest service techniques. Astec parts support includes well-stocked shelves and a computerized network of parts inventories that crosses the continent. In minutes, we can locate the part you need at its closest location. See your Astec dealer for prompt service and parts backup to minimize downtime problems. SAFETY NEVER HURTS! Always read the Operator s Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs and use any safety features provided. TTRENCHER R E C H E R MAXI-SNEAKER SERIES C 36" 13 hp 720 lb Max Trencher Dig Depth SAE Gross Horsepower Operating Weight 45" 18 hp 2,315 lb 36" 2,346 lb 37 hp 32 hp 60" 3,906 lb 60" 37 hp 5,660 lb 72" 51 hp 7,000 lb 72" 60 hp 10,304 lb 84" 99.5 hp 13,121 lb NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable. IMPORTANT: Astec Underground reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Units shown may be equipped with non-standard equipment. Attachments from other manufacturers are shown for illustration only. Astec Underground does not warrant the safety or reliability of these attachments. 2005 ASTEC UNDERGROUND ASTEC UNDERGROUND 9600 CORPORATE PARK DRIVE LOUDON, TN 37774 TOLL FREE 800.527.6020 PHONE 865.408.2100 FAX 865.458.8575 Visit Astec Underground on the Web at: http://www.astecundergound.com Form No. AT 106 0105
Expanding the World and Your Prospects With the world at the brink of an information explosion, you need to be ready to handle the workload. And no other line of trenchers is better suited to be the tools you use to get you to your destination. Whether you re getting ready to pave the information super-highway or installing the underground utilities that fuel America, there s an Astec trencher designed to meet and exceed your expectations. These tool carriers are top performers in their class. Encore after encore, they consistently earn their keep even in the harshest underground environments. When you know what you re up against, get the equipment that produces results a trencher from Astec Underground. Table of Contents Engine... 4 Electrical... 4 Travel/Work Speeds... 4 Chassis... 5 Hydraulics... 5 Ground Drive... 5 Operator Environment... 6 Tire Options... 6 Tractor Widths... 6 Service... 7 Plow/Reel Carrier... 8 Trencher... 9 Rockwheel... 10 Hydra-Borer System... 10 Dimensions/Operating Weight... 11
Engine The new generation Super Five Series V1505-B diesel engine from Kubota features advanced technologies for high output, low fuel consumption and clean emissions. This compact, 4-cylinder diesel is a smooth, quiet engine with one of the highest horsepowers in the Maxi-Sneaker trencher class. The V1505-B is specifically designed with a large torque rise for excellent lugging ability at any engine speed great for any drop plowing you ll do. Indirect fuel injection with Three Vortex Combustion System design and automatic timing control devices help to decrease fuel consumption by efficiently metering fuel for more complete combustion and cleaner exhaust. The fender-mounted air cleaner draws outside air for a better mix of fuel. Chassis Tunnel bore crankcase construction adds rigidity for low vibration operation. Offset pistons with steel struts prevent piston slap for reduced wear and lower engine noise. Single key-start ignition and shutoff for fast and easy starts and stops. Model... Kubota V1505-B Cylinders... 4 in-line Bore/Stroke... 3.07 x 3.09 (78.0 mm x 78.5 mm) Displacement... 91.4 in3 (1.498 L) Horsepower Gross... 37 (28 kw) @ 3000 rpm Net... 33.5 (25 kw) @ 3000 rpm There isn t another drop plow on the market that offers you more maneuverability than the Maxi-Sneaker C trencher, whether you re going around, over or through The Maxi-Sneaker C trencher uses hydraulic power steering to articulate a full 28-degrees to the left or right of center for a minimum inside turning radius of 72.0 (1.83 m). A 10-degree frame oscillation provides wheel-to-ground contact when plowing over rough terrain or when crossing open trench lines. The compact, narrow width and ride-on design of the Maxi-Sneaker trencher lets you easily go through tight passages like yard gates. Hydraulics High-efficiency hydraulics are designed to give you exceptional response and smooth power flows, even in tight turns. Open-center hydraulics with direct displacement controls provide on-demand flow control for plenty of power when steering and plowing simultaneously, and for instantaneous changes in speed and direction. Hydraulic oil cooler maintains optimum operating temperatures for maximum component life in all climates. ATTACHMENT DRIVE Gear pump... 16.4 gpm (62.1 L/min) STEERING/ ATTACHMENT LIFT Gear pump... 5.9 gpm (22.3 L/min) Suction filter (spin-on)... 6-micron Reservoir Suction screen... 60 mesh Ground Drive ELECTRICAL Battery... 12 volt 685 cold cranking amps Alternator... 30 amp Starter... 12 volt, 1.87 hp (1.4 kw) TRAVEL/WORK SPEEDS 23 x 10.5 x 12 Tires 26 x 12.0 x 12 Tires Transport... 0 to 3.5 mph (5.6 km/h)... 0 to 3.9 mph (6.3 km/h) Working... 0 to 150 ft/min (45.7 m/min)... 0 to 169 ft/min (51.5 m/min) Rated speeds in forward or reverse at 3000 engine rpm s 4 Leave it to Astec to design a ground drive that s unique to the application. You re not only getting a system designed for plowing, you re getting a system made to work efficiently Hydrostatic drive gives you the inching precision and infinitely variable speed you need for greater control when working in different applications and conditions forward and reverse speeds are equal. Heavy-duty 4-wheel drive axles with both front and rear limited-slip differentials provide all the positive ground-biting action you ll need, especially in tough plowing conditions. They re also rated to handle the weight of the attachments and fluid-filled tires. Optional easy-on, easy-off dual wheels minimize landscape restoration by improving flotation in soft terrain and increase traction while plowing. Single wheel hubs can be mounted inward or outward for narrow width or added stability while operating on slopes. Neutral position of the hydrostatic drive provides dynamic braking power when the engine is running. An over-center, hand-operated emergency/parking brake with disc and caliper on the drive shaft prevents movement on slopes. Hydrostatic drive pump... Variable displacement axial piston design Capacity... 0-27.8 gpm (0-105.23 L/min) Axle ratio... 4.89:1 Axle rating... 3,300 lb (1497 kg) Differentials... Limited-slip Output torque (intermittent)... 4400 lb ft (5896 N m) 5
Operator Environment You have total fingertip control of the Maxi-Sneaker C trencher and all its attachments right from the operator s seat. It s the only articulated-steer machine in its class that offers operator comfort with ride-on capability. Being able to ride the Maxi-Sneaker trencher is especially convenient when going through narrow passages like yard gates. The side-mounted operator s seat allows excellent visibility to both sides and to the front or rearmounted attachments. A 2-post ROPS, retractable seat belt and seat interlock system are standard equipment. Low effort, dual-lever ground drive controls for crowd/creep and transport/steering offer precision control when working, and top-end travel speeds when transporting. Transport lever automatically returns to the neutral position when the operator releases the lever. System gauges and indicator lights are grouped for high visibility. Gauges fuel level and hourmeter. Indicator Lights coolant temperature, voltmeter, engine oil pressure, hydraulic oil temperature, seat belt, air filter and hydraulic filter restriction. Service The Maxi-Sneaker C trenchers reputation for low maintenance is another reason it s become the most popular drop plow/trencher in the world. Hydraulic reservoir, engine coolant, axles and ground drive gearbox have 1,000 hour service intervals for minimal maintenance. There are no service brakes, chain or belt drives to maintain, wear out or replace. The 3-position tilt-up engine hood makes engine access fast and easy for routine maintenance. You get engine oil filtering protection with a full flow, 25-micron replaceable spin-on cartridge 200 hour service interval. An externalmounted air cleaner is easily serviced in a matter of seconds. A suction screen in the reservoir and a spin-on hydraulic oil filter maintain system cleanliness. The battery tray slides out from underneath the engine compartment for hassle-free access, even with the trencher attached just unlatch the trencher mount and it pivots out of the way. The fuel tank fill cap is located under the hinged seat for quick, easy access. Gauges and instrument light clusters monitor engine and hydraulic system temperatures, pressures and restricted filters for peak efficiencies. TIRE OPTIONS 23 x 10.5 x 12 cleated singles/duals 26 x 12.0 x 12 cleated singles/duals Water with calcium chloride is approved for use as ballast in these tires. Note: Do not exceed the maximum GVW shown on the ROPS plate. TRACTOR WIDTHS/TURNING RADIUS Overall Width Inside Radius Outside Radius 23 x 10.5 x 12 tires mounted narrow... 36.0 (914 mm)... 73.0 (1.85 m)... 109.0 (2.77 m) 23 x 10.5 x 12 tires mounted wide... 46.0 (1.17 m)... 68.0 (1.73 m)... 114.0 (2.89 m) 23 x 10.5 x 12 tires mounted duals... 57.5 (1.46 m)... 62.25 (1.58 m)... 119.75 (3.04 m) 26 x 12.0 x 12 tires mounted narrow... 40.5 (1.03 m)... 70.75 (1.80 m)... 111.25 (2.82 m) 26 x 12.0 x 12 tires mounted wide... 46.0 (1.17 m)... 68.0 (1.73 m)... 114.0 (2.89 m) 26 x 12.0 x 12 tires mounted duals... 64.5 (1.64 m)... 58.75 (1.49 m)... 123.25 (3.13 m) 6 SERVICE CAPACITIES Fuel tank... 7.4 gal Cooling system... 7.0 qt Engine with oil filter... 6.3 qt Hydraulic reservoir... 6.8 gal Total hydraulic system... 9.0 gal Transmission... 1.0 qt Axles... 3.0 pt (28.0 L) (6.6 L) (6.0 L) (25.7 L) (34.0 L) (0.95 L) (1.42 L) 7
Plow No other drop plow in the world offers you more features to let you work faster and easier. That s how the Maxi-Sneaker C trencher got to be the #1 choice of contractors like you. Ask around you ll see. For additional specs, see Dimensions, page 11. Installed on the front, the trencher attachment is visible as you operate from the ride-on position controls are right at your fingertips. An optional bracket attachment allows the trencher to be installed on the rear of the unit in place of the plow. Standard chains are available with 2 or 4-pitch cupped teeth that can be arranged to dig at widths from 4.0 or 6.0 (102 or 152 mm) reversible hydraulic drive lets you work the chain free if it gets lodged. Dig depths... 24.0 or 36.0 (610 or 914 mm) Digging widths... 4.0 or 6.0 (102 or 152 mm) Chain line speed... 269 ft/min (81.9 m/min) Chain tensile rating... 28,000 lb (12 701 kg) 34,000 lb (15 422 kg) 38,000 lb (17 236 kg) Drive... Hydraulic/reversible System relief... 2500 psi (17 237 kpa) Boom angle from horizontal... Up 45 /down 60 36" VIBRATORY PLOW P40 P75 Vibration... Counter-rotating weights Cycles-maximum... 2381 vpm... 2200 vpm Amplitude... Variable 3/8 to 3/4 (9.5 to 19 mm) Burial depths... 6 to 24... 6 to 30 (152 to 610 mm) (152 to 762 mm) Chute clearance.. 0.5 to 1.25... 0.5 to 1.75 (12.7 to 31.75 mm) (12.7 to 44.45 mm) Drive... Hydraulic System relief...2000 psi (13 790 kpa) Working speed... 0 to 169 ft/min (51.5 m/min) Trenchers are great for making pilot holes when you re plowing, or for short or long runs when you need to lay large diameter pipe that you can t pull in or feed. This optional attachment is available with either a 24.0 (610 mm) sprocket boom, or channel booms in lengths of 24.0 (610 mm) or 36.0 (914 mm). 24" The P40 vibratory plow is designed as an integral part of the prime mover, yet removable for attachment versatility and greater utilization. Innovative plow features, such as non-parallel lift arms with 8-point suspension and rubber isolation mounts, insulate the operator from vibration. A freeswinging plow frame allows the plow to pivot back and forth for maximum maneuverability in tight turns and to follow the path of least resistance in hard ground conditions a swinglock pin locks the plow on center for transporting. Burial depth is reached quickly and maintained with positive hydraulic down pressure. And just the right amount of amplitude provides plenty of fracturing force to let you plow through tough conditions while minimizing restoration. A variety of feed blades with fixed or floating chutes in various radii match cable installation requirements to eliminate cable damage. Trencher 4" 6" 4" 6" Trencher Digging Depths and Widths. Reel Carrier A drop plow wouldn t be complete without a reel carrier easily slipped on and off in a matter of seconds. Cable guides on the front hood and on top of the ROPS direct the cable up and over the operator to the plow for unobstructed flow specific for CATV, electrical and telephone installations. 8 Maximum reel width... 22.0 (559 mm) Maximum reel diameter... 32.0 (813 mm) Capacity... 200 lb (91 kg) Support shaft diameter... 1.66 (42 mm) 9
Rockwheel If you find yourself on a job that requires cutting concrete, asphalt or any tough material, you ll definitely be interested in having your Maxi-Sneaker C trencher equipped with a rockwheel, especially if you need a powerful, compact machine to get in and around tight spots. This attachment is great for stoplight sensor installation, making drops in rock or trenching frozen soil. Dimensions/Operating Weight The rockwheel mounts to the rear of the Maxi-Sneaker C trencher and is supported by two pillow block bearings for long life. It uses carbide cutting teeth and comes in cutting widths of 3, 4 or 5 with a maximum 24 cutting depth. B C U ROCKWHEEL Cutting widths... 3.0 (76 mm) 4.0 (102 mm) 5.0 (127 mm) Cutting depth... Up to 24.0 (610 mm) Teeth... Replaceable carbide tips Drive... Hydraulic Lift... Hydraulic Weight... 700 lb (317 kg) Laying utilities under streets, driveways or sidewalks with the least amount of disturbance is another reason the Maxi-Sneaker C trencher has a reputation for minimal restoration. The optional Hydra-Borer system tunnels beneath surface structures to pull pipe or cable back through. Its high rotational torque can bore through very hard soil conditions, even when backreaming. A variety of bits, reamers DL305MS Drill 10 G J O T DL305MS Drive... Hydraulic Maximum rpm... 156 Torque... 290 lb ft (393 N m) Drill angle... 15 M N R K D L H S E F Hydra-BorerSystem This fluid-assisted directional boring attachment is a surface launched system capable of drilling up to 100 (30.5 m). A P and backreamers are available in sizes from 2.0 (51 mm) to 12.0 (305 mm) for all your needs. Boring stems can be connected to one another to increase the boring length. Optional guides direct the stems on their path. HYDRA-BORER SYSTEM Stem length... 10 0 (3.05 m) Drive... Hydraulic Drive shaft height... 9.5 (242 mm) Maximum rpm... 320 Torque... 291 lb ft (395 N m) Rotation... Bi-directional A. Overall height base tractor... 80.4 (2.04 m) Overall height w/optional 26 x 12 x 12 tires... 81.9 (2.08 m) Base tractor height less ROPS... 49.0 (1.24 m) B. Overall base tractor length... 84.2 (2.14 m) Addition to base tractor length w/plow... P40-33.9 (862 mm) P75-42.0 (1.07 m) Addition to base tractor length w/trencher, w/o boom... 24.0 (610 mm) Overall length w/trencher and plow... P40-142.1 (3.61 m) P75-150.1 (3.81 m) C. Front of hood to centerline of articulation joint... 47.0 (1.19 m) D. Minimum ground clearance base tractor... 5.2 (132 mm) Minimum ground clearance w/optional 26 x 12 x 12 tires... 6.7 (170 mm) E. Wheelbase... 48.0 (1.22 m) F. Center of rear wheel to rear of plow with chute in ground... 51.0 (1.29 m) G. Transport height, plow frame base tractor... P40-52.5 (1.33 m) P75-50.5 (1.28 m) Plow swing angle... P40-15 P75-30 Angle of departure base tractor/plow attachment raised: H. w/18.0 (457 mm) mounted blade... P40-26 P75-15 J. w/o mounted blade... P40-43 P75-34 K. Plow blade tip ground clearance base tractor: w/18.0 (457 mm) blade... P40-38.0 (965 mm) P75-16.9 (429 mm) L. Center of front wheel to center of trencher headshaft... 39.0 (991 mm) M. Height to centerline of trencher... 19.7 (500 mm) N. Angle of approach with trencher attachment... 20 O. Trencher boom angle down from horizontal... 60 P. Trencher boom angle up from horizontal... 45 R. Angle of approach without trencher... 35 Maximum digging depth with: S. plow w/24.0 (610 mm) blade... 24.0 (610 mm) T. trencher w/36.0 (914 mm) boom... 36.0 (914 mm) U. Trencher height... 72.0 (1.83 m) Overall width w/23 x 10.5 x 12 tires mounted narrow... 36.0 (914 mm) Overall width w/23 x 10.5 x 12 tires mounted wide... 46.0 (1.17 m) Overall width w/optional 23 x 10.5 x 12 duals... 57.5 (1.46 m) Overall width w/optional 26 x 12 x 12 tires mounted narrow... 40.5 (1.03 m) Overall width w/optional 26 x 12 x 12 tires mounted wide... 46.0 (1.17 m) Overall width w/optional 26 x 12 x 12 duals... 64.5 (1.64 m) Tread width (centerlines) base tractor... 29.5 (749 mm) Angle of articulation... Left - 28 Right - 28 Operating weight*... 2,346 lb (1064 kg) Note: Base tractor equipped with 23 x 10.5 x 12 tires mounted narrow. *Operating weight of base unit equipped with P40 plow, ROPS, full service capacities, less operator. 11