PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation Computer products Industrial Specification FUNCTION: Momentary action CONTACT ARRANGEMENT: SPST, N.O. TERMINALS: PC pins Mechanical ACTUATION FORCE: grams, grams, grams, grams LIFE EXPECTANCY:, operations. Electrical CONTACT RATING: 5 ma @ V DC. DIELECTRIC STRENGTH: 5 V AC min. CONTACT RESISTANCE: mω max. initial. INSULATION RESISTANCE: Ω min. Process SOLDERING: Preheating to C for 5 sec. max. Keep flux flush with top surface of PC; do not apply to component side of PC and area where terminals are located. Soldering to 55 C for 5 sec. max. Clean by brushing on solder surface. Do not clean switch with solvents. Packaging ulk packaging. Tape & reel for the SMT type: Reels of, pieces for and 5, mm height Reels of 7 pieces for 7, mm height Reels of 5 pieces for 9,5 mm height Reels of pieces for, mm height Environmental OPERATING TEMPERATURE: - C to C NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S 5 Termination S Straight T Straight with ESD pin V Vertical Actuator Shape NONE Round actuator, All versions J Square actuator,. mm side (available for Straight 7, mm and Vertical,5 mm) Actuation Force L grams M grams H grams K grams L F S Insertion Type Thru hole SMTR9* Surface mount, tape & reel Switch height from PC for S and T only (H dimension see actuator height drawings) (.9), thru-hole and SMT 5 5, (.97), thru-hole and SMT 7 7, (.75), thru-hole and SMT 7 7, (.87), thru-hole and SMT, square actuator. mm side only 95 9,5 (.7), thru-hole and SMT, (.5) SMT only RoHS compliant and compatible. Silver plated. *Only the straight type termination without ESD pin is available in SMT type. february 8 Switch length from front leads for V only (H dimension see actuator height drawings),5 (.), vertical 9,85 (.5), vertical 58 5,85 (.), vertical,5 (.), vertical, square actuator. mm side only 8 8,5 (.9), vertical 98
PTS5 Series mm Tact Switches TERMINATION S STRAIGHT,5,8 ±,,7 T STRAIGHT WITH ESD PIN,7 ±,,5 ±,,8,5,7,7,5,5 5,7±,, ±, 5, x Ø,5 V VERTICAL Push 7,5 Ø,5 x Ø, ±,5,5,,5,5,5 x Ø,55 ±,5,95,7,95,55±, x Ø 7±,5 ±,5,,9±, 7 february 8 8,5 99
PTS5 Series mm Tact Switches TERMINATION SMT FOR., 5., 7., 9.5 MM HEIGHT. MM HEIGHT ONLY () -, 9 Ø,5,7±, ±, -,, () 9, Ø,5,7 ±, ±, 9,5, 5,8, ACTUATOR SHAPE J SQUARE ACTUATOR VERTICAL THT - FOR,5MM LENGTH ONLY, 7,5 xø,9,5,,,85,,8 Push,55 ±,5 xø, ±,5,95,7, 7±,,95,,,55±,, xø 7±,5 RECOMMENDED 8,5±, february 8
PTS5 Series mm Tact Switches ACTUATOR SHAPE VERTICAL THT - FOR 7,MM HEIGHT ONLY,,8,,,85 7,,5,7 ±, Ø,5,5, RECOMMENDED xø,5 STRAIGHT SMT - FOR 7,MM HEIGHT ONLY,,8 (),, 7,, -,,5 9, RECOMMANDED 9,5,,7, 5,8, february 8
PTS5 Series mm Tact Switches ACTUATION FORCE CODE L M H K FORCE grams lack grams lue grams Gray grams Red -, () H ±. ACTUATOR HEIGHT Switch height from PC for S and T only CODE DIMENSION H TERMINATION Without EMC pin With EMC pin (.9) Thru-hole and SMT 5 5, (.97) Thru-hole and SMT 7 7, (.75) Thru-hole and SMT 95 9,5 (.7) Thru-hole and SMT, (.5) SMT Switch length from front leads for V only,95,55±,,5 CODE DIMENSION H TERMINATION Without EMC pin With EMC pin,5 (.) Vertical 9,85 (.5) Vertical 58 5,85 (.) Vertical 8 8,5 (.9) Vertical Cover tape (Polyester) Carrier tape (Polystyrene) Pocket Height Reel (Polystyrene) H For. and 5. mm: Height 5. mm For 7. mm: Height 7. mm For 9.5 mm: Height. mm For. mm: Height. mm,5 +, ±, ±, Cover tape ±,75±, 7,, H ±, TAPE & REEL ±, february 8