& Floor Standing Enclosures
Industrial Automation Power istribution 5 Modular Type Modular Type Görsel 6 Görsel 8 Monoblock Type Monoblock Type Görsel 7 Görsel 9
6 7 FRAME STRUCTURE EARTING CONTINUITY Modular Type Monoblock Type Modular Type 2 welded frontrear frames which made by 1,50mm material Semi closed vertical and witdh profiles Closed depth profiles Totaly welded frames which made by 1,50mm material Semi closed vertical and witdh profiles Fixed closed sides Earthing continuity thanks to welded vertical and horizantal profiles Earthing continuity thanks to special design of fastener between frontrear frames and depth profiles Placed on the bottomtop inner parts of the fron door, the earthing studs increase conductive surface. Earthing continuity on all panels thanks to welded studs. CORROSION PROTECTION FRONT OOR and LOCKING SYSTEM Modular Type Monoblock Type C3 class corrosion protection according to EN 1292 EN 101200 X51 +Z Galvanized steel Ironphosphated and powder coated surface processed 80 hours salt test resistance points locking and hinging system on the outside of the frame PullPush working system of swing handle Modifiable insert system from cylinder inserts to other universal inserts like doublebit, square ect. Perforated door stiffeners in largest positioning
8 9 IP PROTECTION and NEMA CATEGORIES Modular Type EASY ASSEMBLING AN LOGISTICAL AVANTAGES on NEO MOULAR TYPE IP55 protection related to EN 60 529 and NEMA 12 with gland plate assembling for both single and double door. All doors and panels are gasketed with sealing foam gasket which enable complete isolation between 10C and +50C. IP3 protection related to EN 60 529 and NEMA 1 without gland plate assembling for both single and double door. All doors and panels are gasketed with sealing foam gasket which enable complete isolation between 10C and +50C. ASSEMBLING STEP 1 ASSEMBLING STEP 2 Monoblock Type IP65 protection related to EN 60 529 and NEMA for single door IP65 protection related to EN 60 529 and NEMA 12 for double door All doors and panels are gasketed with sealing foam gasket which enable complete isolation between 10C and +50C. ASSEMBLING STEP 3 Offered as flat package, the Neo Modular system is designed for an easy mounting in minimal amount of time. It does not require angulation for body and can be mounted 1520 minutes bt two persons. Offered as flat package, Neo Modular system saves space during transportation and storage. ASSEMBLING STEP
Adaptabilty To Teos Parts Adaptabilty To Teos Accesorries 10 11 Mounting Plate System Neo Modular and Neo Monoblock frame system are same as Teos frame related with the internal dimensions. Therefore Mounting plate system of Teos which includes 3mm thickness and 2mm thickness can adaptate to Neo Modular and Neo Monoblok design. ACCESSORY TOPIC NEO MOULAR Neo Modular and Neo Monoblock frame system are same as Teos frame related with the internal dimensions. Thanks to this advantage, most of the Teos accessories can adaptate to Neo Modular and Noe Monoblock design. In below sheet that the adaptable accossories can be find: NEO mb MONOBLOCK TEOS CATALOGUE 15 PAGE SCISSILE RAIL SYSTEM 780 MCBMCCB KITS 8183 Plinth System PARTIAL MOUNTING PLATES 8 COVER PLATE SYSTEM 8689 FIXE PLINT 90 PLINT ACCESORRIES 91 TABLO 1 CABLE ENTRY ACCESSORIES 92 MOUNTING PLATE ACCES 9 19 SYSTEM PARTS 9596 EARTING CABLE 97 M6 IE NUT 97 OOR RAIL 98 OOR STOPPER 98 Neo Modular and Neo Monoblock frame system are same as Teos frame related with the bottom dimensions. Therefore plinth system of Teos which includes 100mm and 200mm versions can adaptate to Neo Modular and Neo Monoblok design. METAL PLAN POCKET 98 LAMP RAIL 100 SITC BRACKET 100 TOP ANGLE IRON COMB 106 CORNER 107
Modular Type Floor Standing Enclosure 12 13 1 2 3 1 2 3 5 6 7 8 2 2 Modular Type Floor Standing Enclosure 5 STEP 1: 6 7 8 MAIN BOY GROUP STEP 2 : elded frames : 1,50mm galvanized steel + RAL 7035 powder coated Fron oor : 1,50mm sheet steel + RAL 7035 Powder coated Rear Panel : 1,20mm sheet steel + RAL 7035 Powder coated 2 pcs welded frame, 1 pc front door, 1 pc rear panel, lock parts, hinges and required assembiling parts Note : There are 2 versions in selection. Version 1 is solid design. Version 2 is glazed door. Note : 1000w and width enclosures are double doors. SOLI OOR SOLI OOR SIZE GLAZE OOR GLAZE OOR 83,8 60 GLASS SIZE 10 105,3 NUMBERS IT () EIGT () VERSION 1 SOLI VERSION 2 GLAZE 616.121 618.121 1 616.161 1 618.161 1 616.181 616.182 1 618.181 618.182 1000 1 610.181 1 612.181 61.201 616.201 616.202 700 617.201 617.202 618.201 618.202 1000 610.201 612.201 FRAME EPT PARTS epth parts : 1,50mm galvanized steel + RAL 7035 textured powder coated pcs frame depth parts and required assembiling parts EPT () NUMBER 620. 620. 620. 620.
Modular Type Floor Standing Enclosure 1 15 1 2 3 1 2 3 5 6 7 8 2 2 Modular Type Floor Standing Enclosure 5 STEP 3: 6 7 8 STEP : TOP COVER 1,20mm sheet steel + RAL 7035 powder coating 1 pc top cover and required assembiling parts PLINT PARTS The design of Neo frame is same as Teos frame bottom sizes. Thanks to this advantage, plinth parts of Teos are avaible to assemble to Neo system. PLINT CORNER PART SIZE NUMBERS SIZE EPT () 62. 62. 62. 628. 626. 628. 626. 621. 626. 621. 626. 621. 627. 621. 627. 622. 627. 622. 627. 622. 622. 700 IT () EPT( ) 628. 628. 1000 PLINT SIE COVER NUMBERS IT () PLINT FRONT COVER Corner part : 2,00mm galvanized steel + RAL 7012 powdercoating 1,50mm galvanized steel + RAL 7012 powdercoating Plastic Panel : RAL 7012 ABS Plastic Supply includes : 2 pcs100mm height front plinth cover and mounting parts Supply includes : pcs 100mm or 200mm high plinth corner part, pcs plastic panel and mounting parts. Required : 2 sets of side plinth cover group for 200mm height plinths 100mm Baza Yan kapağı : 1,50mm galvanized steel + RAL 7012 powdercoating Supply includes : 2 pcs 100mm height side plinth cover and mounting parts Required : 2 sets of side plinth panel group for 200mm height plinths REFERENCE NO. IT () REFERENCE NO. 100 708.100 709.10 EPT () REFERENCE NO. 200 708.200 709.160 710.10 700 709.170 710.150 709.180 710.160 1000 709.100 710.180 709.120 TEOS PLINT EIGT (2)
Modular Type Floor Standing Enclosure 16 17 1 2 3 1 2 3 5 6 7 8 2 2 Modular Type Floor Standing Enclosure 5 STEP 5: 6 7 8 GLAN PLATE SYSTEM STEP 6 : Plate holders : 1,50mm galvanized steel + RAL 7035 P.C. Gland plates : 1,50mm galvanized steel 3,00 mm galvanized steel 1 pc mounting plate and assembling parts 2 pcs width plate holders, 2 pcs depth plate holders, 3 or pcs gland plates related with depth size EIGT Note : Neo gland plate system is the same as Teos. Thanks to this advantage, the accossories as to gland plate of Teos can adaptable to Neo gland plate system. SIZE NUMBER IT () EPT () 63. 700 SIZE NUMBER MOUNTING PLATE (3mm thickness) STEP 6 : IT 1 707.612 707.616 1 707.618 2200 707.620 707.622 700 707.718 707.720 707.812 707.816 707.818 707.820 707.822 1000 707.018 707.020 707.218 707.220 MOUNTING PLATE (2mm thickness) IT () EPT () 638. 63. 638. 2,00 mm / galvanized steel 63. 638. Supply includes : 1pcs mounting plate and mounting parts. 636. 638. 636. 631. Required : 2 pcs mounting plate bracket for supporting the mountingplate from middle. 93.65 (2 pcs) page 9 636. 631. 636. 631. 637. 631. 637. 632. 637. 632. 637. 632. 632. 1000 Attention : 2 pcs scissile support rail for moving front to back themounting plate. EIGT IT 1 1 717.612 717.616 717.618 717.620 700 717.718 717.720 717.812 717.816 717.818 717.820
Modular Type Floor Standing Enclosure 18 19 1 2 3 1 2 3 5 6 7 8 2 2 Modular Type Floor Standing Enclosure 5 STEP 7: 6 7 8 SIE PANELS (2 pcs) STEP 8 : 2 pcs combination angles, 8 set M6 fasteners, 2pcs adjustable bracket, 5.6m insulation gasket and assembling parts 1,20mm sheet steel + RAL 7035 P.C. 2 pcs side panels and assembling parts. SIZE Referance No : 611.000 NUMBERS EIGT () EPT () 632.12 632.125 632.126 632.16 632.165 632.166 632.18 632.185 632.186 632.188 632.20 632.205 632.206 632.208 1 1 BAYING KIT STEP 8 : EYEBOLTS ( pcs) pcs M12 eyebolts Referance No : 612.000 Note : It is required for each cubic and combination panels. This accessory is not included in standart package.
Modular Type Floor Standing Enclosure Modular Type Floor Standing Enclosure 20 21 (ASSEMBLE PACK) (ASSEMBLE PACK) Step 1 + Step 2 + Step 3 + Step 5 Frame, front door, rear panel, top cover, gland plate Supply Not Includes: ithout Mounting Plate (see page 17), Plinth parts (see page 15), side panels (see page 18), baying kit and eyebolts (see page 21) Note : Selected Plinth parts and Mounting plate can be mount during the assembling to the assembled pack. IT () SIZE EIGT () EPT () NUMBERS SOLI OOR 6.20 6.205 6.206 6.208 66.12 66.125 66.126 1 66.16 66.165 66.166 GLAZE OOR 1 66.18 676.18 66.185 676.185 66.186 676.186 66.188 676.188 66.20 676.20 66.205 676.205 66.206 676.206 66.208 676.208 700 67.20 677.20 67.205 677.205 67.206 677.206 67.208 677.208 IT () SIZE EIGT () EPT () NUMBERS SOLI OOR 68.12 68.125 68.126 1 68.16 68.165 68.166 GLAZE OOR 1 68.18 678.18 68.185 678.185 68.186 678.186 68.188 678.188 68.20 678.20 68.205 678.205 68.206 678.206 68.208 678.208 1000 1 60.18 60.185 60.186 60.188 60.20 60.205 60.206 60.208 1 62.18 62.185 62.186 62.188 62.20 62.205 62.206 62.208
Monoblock Type Floor Standing Enclosure Monoblock Type Floor Standing Enclosure 22 23 Enclosure body, gland plate: 1,50mm Galvanized steel + RAL 7035 Powder Coating Front door : 1,50mm sheet steel + RAL 7035 Powder coating Rear Panel : 1,20mm sheet steel + RAL 7035 Powder Coating Enclosure body, front door, locks, hinges, gland plates, rear panel. Supply Not Includes : ithout Mounting Plate(see page 17), Plinth parts (see page 15) Note : Selected Plinth parts and Mounting plate can be mount during the assembling. SIZE IT () EIGT () EPT () SOLI OOR 656.12 1 656.165 NUMBERS GLAZE OOR 1 656.18 666.18 656.20 666.20 658.12 1 658.165 658.165 1 658.18 668.18 658.185 668.185 658.20 668.20 658.205 668.205 658.206 668.206 SIZE IT () EIGT () EPT () SOLI OOR 1000 650.20 650.205 652.20 652.205 652.206 NUMBERS GLAZE OOR
& Accessories 2 25 & Accessories BRUSE CABLE ENTRY SYSYTEM FOR OTER LOCK INSERT OPTIONS FOR SING ANLE ABS plastic, plugin system Protection Category : IP 55 (EN 60 529), Nema 12 Strip brush, combination profile and parts *Note : 2pcs required for 1000 and width enclosures Referance Numbers : oublebit insert : 950.110 6,50mm triangle insert : 950.111 7,00mm square insert : 950.112 Required : In case of selection other lock insert options, it is requires selection of interested keys IT () NUMBER 923.602 923.802 1000 * 923.102 * 923.122 KEYS Referance Numbers : oublebit key : 952.101 6,50mm triangle key : 952.200 7,00mm square key : 952.201 ALL FIXING RAIL SYSTEM FOR,00mm sheet steel + RAL 7035 Powder Coating 2 pcs rails and assembling parts Attention : Fixing on to wall option is valid for height eight enclosures. For other heights is valid for using with plinth option helping by floor support. IT () NUMBER 972. 972. 1000 972.100 972.120
Modular Type Technical rawings Modular Type Technical rawings 26 27 C 82 82 73,7 73 56 72 77,5 73 72 56 82 50 1 C 5 103/203 5 5,5 1,5,5 3 SECTION CC 2 1 82 C C 103/203 3 3 2 1 50 1 SECTION 5,5 5,5 1 2 2 SECTION SECTION BB IT 1 2 3 EPT 1 2 EIGT 1 IT 1 2 3 EPT 1 2 EIGT 1 320 151 370 320 203 1088 320 151 370 320 203 1088 88 520 351 70 20 303 1 1 188 88 520 351 70 20 303 1 1 188 688 720 551 570 520 03 1 1 1688 688 720 551 570 520 03 1 1 1688 1000 1000 888 920 3,5x2 770 720 603 1888 1000 1.000 888 920 3,5x2 770 720 603 1888 1088 1120,5x2 1088 1120,5x2
Monoblock Type Technical rawings Monoblock Type Technical rawings 28 29 C 89 73,7 79,9 72 72, 71 72 82 C 103/203 55 50 7 8,9 SECTION CC 3 1 2 82 55 1 1 C C 103/203 50 5 6, SECTION 1 1 3 3 2 1 2 2 SECTION SECTION CC IT 1 2 3 EPT 1 2 EIGT 1 IT 1 2 3 EPT 1 2 EIGT 1 88 520 260 370 320 10 1088 88 520 260 370 320 10 1088 688 720 60 70 20 10 1 1 188 688 720 60 70 20 10 1 1 188 1000 1000 888 920 260x2 570 520 10 1 1 1688 1000 1000 888 920 260x2 570 520 10 1 1 1688 1088 1120 360x2 1888 1088 1120 360x2 1888
www.tekpan.com.tr 03.23