Modular Enclosure System

Modular Enclosure System Flexible design, maximum versatility ENCLOSURES AND CLIMATE CONTROL NHP Electrical Engineering Products NZ nhp-nz.com 0800 NHP NHP

MODULAR enclosure system The MODULAR enclosure system is an established, well-recognized and high quality product that has been sold in New Zealand for over 14 years. It is designed and manufactured in New Zealand specifically for the electrical market. The MODULAR design and flexibility enables fast and easy assembly of electrical panels. There are no limits in design providing maximum versatility for the enclosure required and can be configured and/or expanded at any time to suit specific requirements. Applications Distribution boards Control panels Automation Control cabinets Main Switchboards Product Information Construction Frameles Sheet Steel construction: 1.6mm zinc annealed steel Degree of protection: IP40 (IP 54 optional) Colour/Finish: External Dulux/Orica PG288 cream ripple 57289 Back plates gear trays - division plates gloss white MODULAR widths and heights are measured in multiples of 125mm. Heights available: 250 to 2250mm in 125mm increments Cell Widths available: 250 to 1000mm in 125mm increments Depths available in 4 standard sizes: 130-240-350-460mm Choice of hinged doors without or with key locks Fixed or hinged covers Masking panels can be removed without removal of doors Full range of mullions and division plates for simple compartment segregation Plain and perforated gear plates up to 2250mm x 1000mm Brackets and din rail for easy installation of equipment Choice of steel, plastic or aluminium gland plates Faston earth connections on all covers 3.0mm modular plinths for floor mounting application Ask your NHP Sales representative for our NHP Modular price assisting tool. 2

Contents Page Introduction 2 Plinths 4 Profiles 110mm & 220mm profiles 5 Profiles 330mm &440mm profiles 6 Gland plates, steel, alloy & plastic 7 Mullions - front and back 8 Division plates 9-10 Backplates 11 Gear trays steel 12 Perforated gear trays steel 13 Doors 14 Fixed covers 15 Masking panels 16 Accessories - fastening kits & mounting brackets 17 Bulk fastening and supplies 18 Pre-cut profiles 19-23 3

Plinths Steel - 3.0mm Colour - cream ripple (powder coated) 75mm high Plinth rails 250 L PR250 $16.00 375 L PR375 $21.00 500 L PR500 $25.00 625 L PR625 $30.00 750 L PR750 $35.00 875 L PR875 $40.00 1000 L PR1000 $44.00 1125 L PR1125 $49.00 1250 L PR1250 $54.00 1375 L PR1375 $58.00 1500 L PR1500 $63.00 1625 L PR1625 $68.00 1750 L PR1750 $72.00 1875 L PR1875 $77.00 2000 L PR2000 $82.00 2125 L PR2125 $87.00 2250 L PR2250 $92.00 Plinth ends 130 PE130 $11.00 240 PE240 $15.00 350 PE350 $19.00 460 PE460 $22.00 Fastening kit * Cat. No. Price Set PLFK $7.55 Order 2 x rails, 2 x ends and 1 x PLFK fastening kit for a complete plinth * Or order separate parts in bulk for quantity discouts Price schedule: NS1201D 4

110 & 220mm profiles 110mm Plain 110mm Slotted (for Gland Plates) Fastening kit required for 4 x profiles, 1 x PFK 250 L PP251 $16.00 250 L SP251 $16.00 375 L PP371 $20.00 375 L SP371 $20.00 500 L PP501 $25.00 500 L SP501 $25.00 625 L PP621 $29.00 625 L SP621 $29.00 750 L PP751 $33.00 750 L SP751 $33.00 875 L PP871 $37.00 875 L SP871 $37.00 1000 L PP1001 $43.00 1000 L SP1001 $43.00 1125 L PP1121 $47.00 1125 L SP1121 $47.00 1250 L PP1251 $74.00 1250 L SP1251 $74.00 1375 L PP1371 $79.00 1375 L SP1371 $81.00 1500 L PP1501 $85.00 1500 L SP1501 $85.00 1625 L PP1621 $91.00 1625 L SP1621 $93.00 1750 L PP1751 $98.00 1750 L SP1751 $99.00 1875 L PP1871 $111.00 1875 L SP1871 $112.00 2000 L PP2001 $116.00 2000 L SP2001 $116.00 2125 L PP2121 $123.00 2125 L SP2121 $123.00 2250 L PP2251 $131.00 2250 L SP2251 $131.00 220mm Plain 250 L PP252 $22.00 375 L PP372 $28.00 500 L PP502 $35.00 625 L PP622 $41.00 750 L PP752 $47.00 875 L PP872 $54.00 1000 L PP1002 $61.00 1125 L PP1122 $68.00 1250 L PP1252 $108.00 1375 L PP1372 $116.00 1500 L PP1502 $125.00 1625 L PP1622 $134.00 1750 L PP1752 $144.00 1875 L PP1872 $157.00 2000 L PP2002 $167.00 2125 L PP2122 $178.00 2250 L PP2252 $188.00 220mm Slotted (for Gland Plates) 250 L SP252 $22.00 375 L SP372 $28.00 500 L SP502 $35.00 625 L SP622 $41.00 750 L SP752 $47.00 875 L SP872 $54.00 1000 L SP1002 $61.00 1125 L SP1122 $68.00 1250 L SP1252 $108.00 1375 L SP1372 $116.00 1500 L SP1502 $125.00 1625 L SP1622 $134.00 1750 L SP1752 $144.00 1875 L SP1872 $157.00 2000 L SP2002 $167.00 2125 L SP2122 $178.00 2250 L SP2252 $188.00 Note: *250mm - 625 mm are fully cut out **750mm - 2250 mm punched with multiple slots to be cut out as required Price schedule MX: 5

330 & 440mm profiles Fastening kit not included - refer accessories PFK - fastening kit - four profile 330mm Plain 250 L PP253 $38.00 375 L PP373 $48.00 500 L PP503 $59.00 625 L PP623 $70.00 750 L PP753 $80.00 875 L PP873 $92.00 1000 L PP1003 $105.00 1125 L PP1123 $115.00 1250 L PP1253 $179.00 1375 L PP1373 $195.00 1500 L PP1503 $211.00 1625 L PP1623 $226.00 1750 L PP1753 $243.00 1875 L PP1873 $268.00 2000 L PP2003 $282.00 2125 L PP2123 $299.00 2250 L PP2253 $316.00 330mm Slotted (for Gland Plates) 250 L SP253 $38.00 375 L SP373 $48.00 500 L SP503 $59.00 625 L SP623 $70.00 750 L SP753 $80.00 875 L SP873 $92.00 1000 L SP1003 $105.00 1125 L SP1123 $115.00 1250 L SP1253 $179.00 1375 L SP1373 $195.00 1500 L SP1503 $211.00 1625 L SP1623 $226.00 1750 L SP1753 $243.00 1875 L SP1873 $268.00 2000 L SP2003 $282.00 2125 L SP2123 $299.00 2250 L SP2253 $316.00 Fastening kit required for 4 x profiles, 1 x PFK 440mm Plain 250 L PP254 $43.00 375 L PP374 $56.00 500 L PP504 $69.00 625 L PP624 $82.00 750 L PP754 $95.00 875 L PP874 $107.00 1000 L PP1004 $124.00 1125 L PP1124 $137.00 1250 L PP1254 $215.00 1375 L PP1374 $231.00 1500 L PP1504 $249.00 1625 L PP1624 $268.00 1750 L PP1754 $288.00 1875 L PP1874 $316.00 2000 L PP2004 $335.00 2125 L PP2124 $359.00 2250 L PP2254 $371.00 440mm Slotted (for Gland Plates) 250 L SP254 $43.00 375 L SP374 $56.00 500 L SP504 $69.00 625 L SP624 $82.00 750 L SP754 $95.00 875 L SP874 $107.00 1000 L SP1004 $124.00 1125 L SP1124 $137.00 1250 L SP1254 $215.00 1375 L SP1374 $234.00 1500 L SP1504 $253.00 1625 L SP1624 $268.00 1750 L SP1754 $288.00 1875 L SP1874 $319.00 2000 L SP2004 $341.00 2125 L SP2124 $359.00 2250 L SP2254 $371.00 Note: *250mm - 625mm are fully cut out **750mm - 2250mm punched with multiple slots to be cut out as required Price schedule: NS1201D 6

GP - Gland plates 1.6mm Steel 3.0mm Aluminuim 2.0mm Plastic Fastening kit not included - refer accessories 110mm deep mm Steel Alloy Plastic 250 L $3.90 $12.00 $6.75 375 L $5.90 $16.00 $8.90 500 L $7.80 $20.00 $9.90 625 L $9.80 $26.00 $11.00 750 L $12.00 $32.00 $13.00 875 L $13.00 $40.00 $14.00 1000 L $16.00 $48.00 $15.00 330mm deep mm Steel Alloy Plastic Fastening kit required 250 L $11.00 $36.00 $16.00 GPK1 375 L $16.00 $48.00 $21.00 GPK1 500 L $22.00 $59.00 $24.00 GPK1 625 L $27.00 $77.00 $28.00 GPK2 750 L $33.00 $96.00 $32.00 GPK2 875 L $37.00 $119.00 $36.00 GPK2 1000 L $45.00 $145.00 $40.00 GPK2 220 mm deep mm Steel Alloy Plastic 250 L $7.80 $25.00 $9.00 375 L $9.80 $32.00 $12.00 500 L $14.00 $40.00 $15.00 625 L $18.00 $52.00 $18.00 750 L $22.00 $63.00 $20.00 875 L $23.00 $80.00 $22.00 1000 L $29.00 $96.00 $25.00 440 mm deep mm Steel Alloy Plastic Fastening kit required 250 L $16.00 $49.00 $18.00 GPK7 375 L $20.00 $64.00 $24.00 GPK7 500 L $27.00 $79.00 $29.00 GPK7 625 L $35.00 $103.00 $35.00 GPK2 750 L $43.00 $126.00 $40.00 GPK2 875 L $47.00 $162.00 $44.00 GPK2 1000 L $59.00 $195.00 $49.00 GPK2 Cat. No. Ordering code example: 500 wide x 220 deep steel gland plate GP S 50 2 Gland plate S - Steel A - Alloy P - Plastic Width Depth 1-110 2-220 3-330 4-440 Price schedule MX: 7

Mullions Front mullions include FMK fixing kit Front Fastening kit required 250 L FM250NHP $19.00 FMK 375 L FM375NHP $23.00 FMK 500 L FM500NHP $28.00 FMK 625 L FM625NHP $32.00 FMK 750 L FM750NHP $37.00 FMK 875 L FM875NHP $42.00 FMK 1000 L FM1000NHP $47.00 FMK 1125 L FM1125NHP $52.00 FMK 1250 L FM1250NHP $58.00 FMK 1375 L FM1375NHP $63.00 FMK 1500 L FM1500NHP $68.00 FMK 1625 L FM1625NHP $73.00 FMK 1750 L FM1750NHP $78.00 FMK 1875 L FM1875NHP $82.00 FMK 2000 L FM2000NHP $87.00 FMK 2125 L FM2125NHP $93.00 FMK 2250 L FM2250NHP $97.00 FMK Back Fastening kit required 250 L BM250 $11.00 4 x CSK Rivet 375 L BM375 $14.00 4 x CSK Rivet 500 L BM500 $17.00 4 x CSK Rivet 625 L BM625 $21.00 4 x CSK Rivet 750 L BM750 $23.00 4 x CSK Rivet 875 L BM875 $27.00 4 x CSK Rivet 1000 L BM1000 $31.00 4 x CSK Rivet 1125 L BM1125 $33.00 4 x CSK Rivet 1250 L BM1250 $35.00 4 x CSK Rivet 1375 L BM1375 $40.00 4 x CSK Rivet 1500 L BM1500 $43.00 4 x CSK Rivet 1625 L BM1625 $46.00 4 x CSK Rivet 1750 L BM1750 $49.00 4 x CSK Rivet 1875 L BM1875 $53.00 4 x CSK Rivet 2000 L BM2000 $58.00 4 x CSK Rivet 2125 L BM2125 $68.00 4 x CSK Rivet 2250 L BM2250 $75.00 4 x CSK Rivet Price schedule: NS1201D 8

Division plates For use with front mullion only when dividing 2 cells that share 1 back plate Colour - white gloss (powder coated) 110mm wide 250 L DPB251 $8.00 375 L DPB371 $10.00 500 L DPB501 $13.00 625 L DPB621 $16.00 750 L DPB751 $19.00 875 L DPB871 $22.00 1000 L DPB101 $23.00 330mm wide 250 L DPB253 $23.00 375 L DPB373 $32.00 500 L DPB503 $40.00 625 L DPB623 $49.00 750 L DPB753 $57.00 875 L DPB873 $65.00 1000 L DPB103 $72.00 220mm wide 250 L DPB252 $16.00 375 L DPB372 $22.00 500 L DPB502 $27.00 625 L DPB622 $33.00 750 L DPB752 $38.00 875 L DPB872 $43.00 1000 L DPB102 $48.00 440mm wide 250 L DPB254 $32.00 375 L DPB374 $43.00 500 L DPB504 $54.00 625 L DPB624 $66.00 750 L DPB754 $78.00 875 L DPB874 $87.00 1000 L DPB104 $97.00 Price schedule MX: 9

Division plates For use with front & back mullion Colour - white gloss (powder coated) 110mm wide 250 L DP251 $8.00 375 L DP371 $10.00 500 L DP501 $13.00 625 L DP621 $16.00 750 L DP751 $19.00 875 L DP871 $22.00 1000 L DP101 $23.00 330mm wide 250 L DP253 $24.00 375 L DP373 $32.00 500 L DP503 $40.00 625 L DP623 $49.00 750 L DP753 $57.00 875 L DP873 $64.00 1000 L DP103 $72.00 220mm wide 250 L DP252 $16.00 375 L DP372 $22.00 500 L DP502 $27.00 625 L DP622 $33.00 750 L DP752 $38.00 875 L DP872 $43.00 1000 L DP101 $48.00 440mm wide 250 L DP254 $31.00 375 L DP374 $43.00 500 L DP504 $55.00 625 L DP624 $66.00 750 L DP754 $77.00 875 L DP874 $87.00 1000 L DP104 $97.00 Price schedule: NS1201D 10

BP - Back plates Colour - white gloss (powder coated) Fastening kit not included - refer accessories mm 250 W 375 W 500 W 625 W 750 W 875 W 1000 W Fastening kit required 250 H $17.00 BPK1 375 H $22.00 $28.00 BPK1 500 H $27.00 $35.00 $45.00 BPK1 625 H $32.00 $43.00 $54.00 $66.00 BPK1 750 H $37.00 $50.00 $63.00 $77.00 $92.00 BPK1 875 H $42.00 $57.00 $73.00 $89.00 $105.00 $120.00 BPK1 1000 H $47.00 $64.00 $82.00 $101.00 $106.00 $138.00 $156.00 BPK1 1125 H $53.00 $73.00 $94.00 $113.00 $135.00 $155.00 $176.00 BPK1 1250 H $57.00 $80.00 $103.00 $126.00 $149.00 $169.00 $195.00 BPK1 1375 H $62.00 $87.00 $111.00 $138.00 $163.00 $189.00 $213.00 BPK1 1500 H $68.00 $98.00 $122.00 $149.00 $176.00 $203.00 $231.00 BPK2 1625 H $73.00 $102.00 $130.00 $159.00 $191.00 $220.00 $248.00 BPK2 1750 H $77.00 $110.00 $142.00 $173.00 $204.00 $233.00 $266.00 BPK2 1875 H $82.00 $117.00 $150.00 $185.00 $218.00 $253.00 $282.00 BPK2 2000 H $87.00 $124.00 $158.00 $197.00 $231.00 $235.00 $305.00 BPK2 2125 H $93.00 $132.00 $174.00 $208.00 $243.00 $284.00 $332.00 BPK2 2250 H $98.00 $137.00 $178.00 $219.00 $259.00 $299.00 $338.00 BPK2 Note: For sizes not shown use reverse height and width size. Example: 625 high x 875 wide Use the 875 high x 625 wide Cat. No. BP8762 Cat. No. Ordering code example: 500 high x 375 wide black plate BP 50 37 Back plate Height Width Price schedule MX: 11

GT - Steel gear trays 15mm deep Colour - gloss white (powder coated) Fastening kit not included - refer accessories mm 250 W 375 W 500 W 625 W 750 W 875 W 1000 W Fastening kit required 250 H $18.00 GTFK1 375 H $23.00 $29.00 GTFK1 500 H $27.00 $36.00 $45.00 GTFK1 625 H $32.00 $38.50 $54.00 $66.00 GTFK1 750 H $36.00 $50.00 $63.00 $77.00 $90.00 GTFK1 875 H $41.00 $57.00 $72.00 $88.00 $103.00 $118.00 GTFK1 1000 H $46.00 $64.00 $81.00 $99.00 $116.00 $134.00 $152.00 GTFK1 1125 H $55.00 $74.00 $94.00 $114.00 $133.00 $156.00 $175.00 GTFK2 1250 H $59.00 $81.00 $103.00 $125.00 $147.00 $168.00 $192.00 GTFK2 1375 H $64.00 $88.00 $112.00 $137.00 $159.00 $187.00 $212.00 GTFK2 1500 H $70.00 $100.00 $123.00 $149.00 $175.00 $202.00 $227.00 GTFK3 1625 H $75.00 $103.00 $131.00 $159.00 $188.00 $221.00 $248.00 GTFK3 1750 H $80.00 $108.00 $137.00 $167.00 $197.00 $228.00 $254.00 GTFK3 1875 H $89.00 $120.00 $153.00 $184.00 $219.00 $251.00 $277.00 GTFK3 2000 H $95.00 $128.00 $164.00 $197.00 $231.00 $268.00 $299.00 GTFK3 2125 H $100.00 $135.00 $179.00 $207.00 $243.00 $284.00 $330.00 GTFK3 2250 H $102.00 $144.00 $183.00 $220.00 $262.00 $293.00 $330.00 GTFK3 Note: For sizes not shown use reverse height and width size. Example: 625 high x 875 wide Use the 875 high x 625 wide Cat. No. GT8762 Cat. No. Ordering code example: 500 high x 375 wide gear tray GT 50 37 Gear tray Height Width Price schedule: NS1201D 12

PGT - Steel gear trays - perforated 15mm deep Colour - gloss white (powder coated) Fastening kit not included - refer accessories GTFK1 - fastening kit 250-1000 (height mm) GTFK2 - fastening kit 1125-1375 (height mm) GTFK3 - fastening kit 1500-2250 (height mm) mm 250 W 375 W 500 W 625 W 750 W 875 W 1000 W Fastening kit required 250 H $54.00 $69.00 $83.00 $97.00 $111.00 $127.00 $141.00 GTFK1 375 H $69.00 $89.00 $110.00 $131.00 $153.00 $173.00 $193.00 GTFK1 500 H $83.00 $111.00 $138.00 $165.00 $192.00 $220.00 $248.00 GTFK1 625 H $97.00 $131.00 $165.00 $196.00 $234.00 $267.00 $301.00 GTFK1 750 H $111.00 $148.00 $193.00 $234.00 $273.00 $313.00 $353.00 GTFK1 875 H $124.00 $169.00 $220.00 $267.00 $313.00 $358.00 $405.00 GTFK1 1000 H $139.00 $193.00 $248.00 $293.00 $353.00 $405.00 $460.00 GTFK1 1125 H $166.00 $227.00 $285.00 $347.00 $403.00 $466.00 $523.00 GTFK2 1250 H $178.00 $243.00 $313.00 $381.00 $444.00 $512.00 $579.00 GTFK2 1375 H $195.00 $267.00 $341.00 $403.00 $488.00 $562.00 $629.00 GTFK2 1500 H $209.00 $302.00 $365.00 $450.00 $528.00 $607.00 $693.00 GTFK3 1625 H $224.00 $310.00 $398.00 $483.00 $568.00 $659.00 $739.00 GTFK3 1750 H $240.00 $330.00 $414.00 $497.00 $586.00 $686.00 $776.00 GTFK3 1875 H $270.00 $360.00 $461.00 $557.00 $652.00 $750.00 $843.00 GTFK3 2000 H $282.00 $386.00 $490.00 $602.00 $704.00 $806.00 $908.00 GTFK3 2125 H $293.00 $410.00 $535.00 $629.00 $739.00 $852.00 $988.00 GTFK3 2250 H $310.00 $425.00 $546.00 $663.00 $784.00 $897.00 $1,011.00 GTFK3 Cat. No. Ordering code example: 500 high x 375 wide perforated gear tray PGT 50 37 Perforated Gear tray Height Width Price schedule MX: 13

D - Doors Depth - 20mm Colour - cream ripple (powder coated) Fastening kit not included - refer accessories DFK1- fastening kit 250-625 (height mm) DFK2- fastening kit 750-1250 (height mm) DFK3- fastening kit 1375-1750 (height mm) DFK4- fastening kit 1875-2250 (height mm) 1 x latch, 2 x hinges 2 x latches, 4 x hinges 3 x latches, 4 x hinges 4 x latches, 4 x hinges Note: Refer page 27 for quantity required mm 250 W 375 W 500 W 625 W 750 W 875 W 1000 W Fastening kit required 250 H $35.00 $37.00 $45.00 $49.00 $57.00 $61.00 $70.00 DFK1 375 H $37.00 $46.00 $54.00 $63.00 $71.00 $79.00 $89.00 DFK1 500 H $45.00 $54.00 $66.00 $76.00 $87.00 $98.00 109.00 DFK1 625 H $49.00 $63.00 $76.00 $98.00 $111.00 $124.00 141.00 DFK1 750 H $57.00 $71.00 $87.00 $111.00 $127.00 $144.00 158.00 DFK2 875 H $61.00 $79.00 $98.00 $124.00 $144.00 $163.00 $161.00 DFK2 1000 H $70.00 $88.00 $109.00 $139.00 $158.00 $179.00 $202.00 DFK2 1125 H $89.00 $113.00 $140.00 $167.00 $194.00 $220.00 $243.00 DFK2 1250 H $100.00 $122.00 $152.00 $183.00 $211.00 $238.00 $259.00 DFK2 1375 H $101.00 $134.00 $165.00 $197.00 $229.00 $262.00 $288.00 DFK3 1500 H $102.00 $143.00 $176.00 $213.00 $238.00 $277.00 $293.00 DFK3 1625 H $115.00 $152.00 $188.00 $227.00 $266.00 $304.00 $341.00 DFK3 1750 H $125.00 $165.00 $188.00 $243.00 $263.00 $325.00 $347.00 DFK3 1875 H $128.00 $170.00 $213.00 $257.00 $302.00 $347.00 $386.00 DFK4 2000 H $135.00 $179.00 $211.00 $271.00 $299.00 $360.00 $412.00 DFK4 2125 H $145.00 $191.00 $266.00 $290.00 $332.00 $386.00 $433.00 DFK4 2250 H $189.00 $248.00 $310.00 $378.00 $444.00 $497.00 $568.00 DFK4 Cat. No. Ordering code example: 500 high x 375 wide door D 50 37 Door Height Width Price schedule: NS1201D 14

F - Fixed covers Depth - 20mm Colour - cream ripple (powder coated) Fastening kit not included - refer accessories FCK1 - fastening kit 250-1000 (height mm) FCK2 - hinged fastening kit 1125-2250 (height mm) HK1 - hinged fastening kit 250-1000 (height mm) mm 250 W 375 W 500 W 625 W 750 W 875 W 1000 W Fastening kit required 250 H $35.00 $37.00 $45.00 $49.00 $57.00 $61.00 $70.00 FCK1 or HK1 375 H $37.00 $46.00 $54.00 $63.00 $71.00 $81.00 $89.00 FCK1 or HK1 500 H $45.00 $54.00 $66.00 $76.00 $87.00 $97.00 $110.00 FCK1 or HK1 625 H $49.00 $63.00 $76.00 $98.00 $111.00 $124.00 $137.00 FCK1 or HK1 750 H $57.00 $71.00 $87.00 $111.00 $127.00 $144.00 $162.00 FCK1 or HK1 875 H $61.00 $79.00 $98.00 $124.00 $142.00 $164.00 $183.00 FCK1 or HK1 1000 H $70.00 $88.00 $109.00 $139.00 $158.00 $183.00 $205.00 FCK1 or HK1 1125 H $88.00 $113.00 $140.00 $167.00 $194.00 $223.00 $248.00 FCK2 1250 H $100.00 $122.00 $152.00 $184.00 $215.00 $242.00 $262.00 FCK2 1375 H $101.00 $134.00 $166.00 $195.00 $231.00 $262.00 $293.00 FCK2 1500 H $102.00 $143.00 $174.00 $217.00 $242.00 $284.00 $298.00 FCK2 1625 H $115.00 $152.00 $188.00 $231.00 $267.00 $304.00 $341.00 FCK2 1750 H $125.00 $165.00 $186.00 $245.00 $263.00 $308.00 $347.00 FCK2 1875 H $128.00 $170.00 $217.00 $262.00 $301.00 $347.00 $386.00 FCK2 2000 H $135.00 $179.00 $211.00 $276.00 $301.00 $366.00 $358.00 FCK2 2125 H $141.00 $191.00 $267.00 $290.00 $337.00 $386.00 $433.00 FCK2 2250 H $188.00 $248.00 $310.00 $382.00 $444.00 $497.00 $564.00 FCK2 Note: Fixed covers 1125mm high and above are hinged as standard, use 1-FCK2 Hinging of fixed covers 1000mm high and below requires 1-FCK1 and 1-HK1 Cat. No. Ordering code example: 500 high x 375 wide fixed cover F 50 37 Fixed cover Height Width Price schedule MX: 15

MP - Masking panels 2 mm Grey PVC Supplied blank Fastening kit not included - refer accessories MPK - fastening kit mm 250 W 375 W 500 W 625 W 750 W 875 W 1000 W Fastening kit required 250 H $11.00 MPK 375 H $14.00 $18.00 MPK 500 H $17.00 $22.00 $28.00 MPK 625 H $20.00 $27.00 $33.00 $40.00 MPK 750 H $22.00 $30.00 $38.00 $47.00 $55.00 MPK 875 H $25.00 $35.00 $44.00 $54.00 $63.00 $73.00 MPK 1000 H $28.00 $38.00 $50.00 $61.00 $72.00 $84.00 $94.00 MPK Note: For sizes not shown use reverse height and width size. Example: 625 high x 875 wide Use the 875 high x 625 wide Cat. No. MP8762 Cat. No. Ordering code example: 500 high x 375 wide masking panel MP 50 37 Masking panel Height Width Price schedule: NS1201D 16

Accessories Cat. No. Description Price PFK Four profile fastening kit (8 - M6 x 15) $4.75 MPK Masking panel fastening kit $18.00 PLFK Plinth fastening kit (8 - M8 x 20) $7.55 FMK Front mullion fastening kit $6.50 DFK1 Door kit 1 latch 2 hinges $26.00 DFK2 Door kit 2 latches 4 hinges $51.00 DFK3 Door kit 3 latches 4 hinges $62.00 DFK4 Door kit 4 latches 4 hinges $76.00 GR15 Gasket foam rubber 15 w (30 mt roll) $170.00 GR35 Gasket foam rubber 35 w (30 mt roll) $282.00 K144 144 Type key lock $15.00 FCK1 Fixed cover kit 4 screws 4 brackets $18.00 FCK2 Fixed cover kit 4 hinges 8 screws 8 brackets $48.00 HK1 Fixed cover hinge kit 250-1000 $17.00 BPK1 Back plate fastening kit 250-1375 $3.30 BPK2 Back plate fastening kit 1500-2250 $5.70 GTFK1 Gear tray fastening kit 250-1000 (4 - M6 x 25) $5.30 GTFK2 Gear tray fastening kit 1125-1375 (6 - M6 x 25) $6.30 GTFK3 Gear tray fastening kit 1500-2250 (8 - M6 x 25) $7.15 GPK1 Gland plate fastening kit 250-500 (4 - M6 x 15) $1.90 GPK2 Gland plate fastening kit 625-1000 (6 - M6 x 15) $3.60 MCBBCKT 1) Hanger bracket MCBS 65D (pair) $9.90 PANBCKT Hanger bracket MCB pan 70 D (pair) $9.90 PANBCKT1 Hanger bracket MCB pan 85 D (pair) $9.90 NHPPANBCKT 2) Hanger bracket NHP MCB pan 94 D (pair) $9.90 HJK3 Hanger bracket adjustable 110 D (pair) $17.00 HJK4 Hanger bracket adjustable 220 D (pair) $19.00 DR250 Din rail alloy heavy duty 35 192 l $7.55 DR375 Din rail alloy heavy duty 35 317 l $9.45 DR500 Din rail alloy heavy duty 35 442 l $13.00 DR625 Din rail alloy heavy duty 35 567 l $15.00 DR750 Din rail alloy heavy duty 35 692 l $15.20 DR875 Din rail alloy heavy duty 35 817 l $17.00 DR1000 Din rail alloy heavy duty 35 942 l $23.00 RANUT Din rail nut 5 tapped hole $2.55 ENBCKT Earth neutral bracket pair $8.15 DENBCKT Double earth neutral bracket pair $8.90 CHART Chart holder $12.00 ¹) For use with DIN-T or MOD6 MC ²) For use with NZL class 5 Price schedule MX: 17

Fastenings and supplies Talk to your rep for special bulk discounts Cat. No. Description Price CLASHSTD Arrow clip $0.30 DBUNG Bung door $3.95 FCBUNG Bung fixed cover $0.30 GTBUNG Bung gear tray $0.30 PAINTCANCREAM Touch up can cream ripple $60.00 PAINTCANWHITE Touch up can white $61.00 DOORLATCH Door latch standard $6.55 MPFCBKT Fixed cover/masking panel bracket $2.25 FMMB Front mullion mounting bracket $3.70 PLHINGE Hinge and pin plated $6.65 PIN Hinge pin plated $0.60 TTBP M4 x 10 pan square No. 2 nibbed taptite $0.05 M6NUTS M6 serrated nuts $0.05 M6X25PEMSTUD M6 FHM625Z1 pem self clinching stud $1.20 M6SCREWS M6 x 16mm paint cutter screws $0.15 M6RUBBERWASHER M6 EDPM WASHER $0.20 M8LOCKWASHER M8 lock washers external tooth $0.55 M8NUTS M8 nuts $0.80 M8BOLTS M8 x 20 hex head bolts $0.85 FCSCREW Machine screw pan and lead point $1.35 PLASWASH Washer plastic $0.30 POPRIVET Pop rivet blind $0.05 CSKRIVET Pop rivet countersunk stainless steel $0.50 CSKTT Screw taptite csk pozi zp clear wax $0.15 PLINTHPLATE Blanking plate for plinth hole $3.80 PLINTHCLAMP Plinth clamp bracket $6.75 WBSS Wall bracket 3mm stainless steel $28.00 DOORCATCH Door catch plate $4.60 Price schedule: NS1201D 18

Pre-cut profiles - Price equal to the slotted profile (SP) with the same overall dimensions The purpose of pre-cut profiles is to save time cutting gland plate holes. Made to order with purchase lead time of 1-2 weeks. Note: only common sizes are available. Any requirement not in this catalogue will require a minimum order quantity of 10 of each item. The ordering code is compiled as follows - PCP = Pre-Cut Profile - 2 digits = first hole width in centimeters ie 25 = 25cm, 37 = 37.5cm etc - Next 2 digits = 2nd hole spacing with in centimeters - Next 2 digits = 3rd hole spacing with in centimeters, if needed - Next 2 digits = 4th hole spacing with in centimeters, if needed - The total length is the sum of the hole spacing s - The Last digit is the depth 1 = 110mm deep profile 2 = 220mm deep profile 3 = 330mm deep profile 4 = 440mm deep profile Rear Front Example PCP25501 Cat. No. ordering code example: PCP 25 50 50 2 Pre-Cut profile First hole 250mm Second hole 500mm Third hole 500mm Depth 220mm Total length 1250mm Please contact NHP for further assistance with product selections and advice 0800NHPNHP or Sales@nhp-nz.com 19

NHP Modular Pre-cut profiles 110 mm deep Rear Front Example PCP25501 Total length 750mm PCP25501 110 250 500 PCP50251 500 250 PCP37501 PCP50371 375 500 500 375 875mm Rear Front PCPB37501 PCP50B371 375 500 500 375 PCP50501 500 500 1000mm 20

Pre-cut profiles 220 mm deep PCP25502 750mm 220 250 500 PCP50252 Rear PCPB37502 500 250 Front 875mm PCP50B372 375 500 500 375 PCP37502 PCP50372 375 500 PCP50502 500 375 1000mm PCP5050252 500 500 1250mm 500 500 250 PCP2550502 250 500 500 PCP5025502 500 250 500 21

Pre-cut profiles 220 mm deep PCP5050372 1375mm 220 PCP3750502 500 500 375 Rear 375 500 500 Front PCP5037502 PCP5050502 500 375 500 1500mm PCP505050252 500 500 500 1750mm 500 500 500 250 PCP255050502 250 500 500 500 PCP505025502 500 500 250 500 PCP502550502 500 250 500 500 PCP505050372 1875mm PCP375050502 500 500 500 375 375 500 500 500 22

Pre-cut profiles 220 mm deep PCP505037502 1875mm 220 PCP503750502 500 500 375 500 Rear PCP505050502 500 375 500 500 Front 2000mm 500 500 500 500 Pre-cut profiles 330 mm deep PCP505050373 1875mm 330 500 500 500 375 PCP375050503 Rear 375 500 500 500 Front PCP505037503 PCP503750503 500 500 375 500 PCP505050503 500 375 500 500 2000mm 500 500 500 500 23

NEW ZEALAND nhp-nz.com SALES 0800 NHP NHP sales@nhp-nz.com NHP Electrical Engineering Products (N.Z.) Ltd A.B.N. 84 004 304 812 NMODEC 1 /18 Copyright NHP 2018 For more information, scan to download the NHP ecatalogues App offering exclusive video content, catalogues and literature