G O R M A N - R U P P P U M P S ENGINEERED PUMPING SYSTEMS GRpumps.com
T H E R I G H T P U M P STATE-OF-THE-ART FACILITIES Superior products require state-of-the-art manufacturing facilities, and Gorman-Rupp s are among the most efficient and modern facilities in the world. We constantly update our plants and employ the latest technology to ensure that our products will be the most reliable in the industry. Our commitment to engineering and manufacturing superiority is the same as it was at our inception in 1933. We realize that modern, efficient and state-of-the-art facilities are necessary for providing superior pumping products and solutions. State-of-the-art, fully automated machining centers provide high-speed, high-quality machining of pump castings. Rough castings are stored and ready for machining and assembly into finished products. High-speed pump assembly lines are designed to assemble large volumes of pumps resulting in very short lead times. WARRANTIES With warranties of five years on the Super T Series, Ultra V Series, UltraMate, Super U Series and J Series pumps and the entire station, and twenty years on enclosures, Gorman-Rupp has you covered. All manufacturers say their solids-handling pumps are reliable. At Gorman-Rupp, we back our words with a warranty that s unequaled in the industry. The Super T Series, Super U Series, Ultra V Series, and J Series pumps have a 5-Year Limited Warranty. Our 5-Year Limited Station Warranty covers the entire package system including controls, piping and valves when supplied with Super T Series, Super U Series, Ultra V Series and J Series pumps. Compare this with the 90-day or one-year limited warranties offered on other pumps and pump stations. All this and 35 years experience in pump station manufacturing. Your pump station investment is only as good as the enclosure that covers it, which is only as good as the warranty that covers the enclosure. That s why Gorman-Rupp offers a 20-Year Limited Warranty on all of our Fiberglass Reinforced Polyester (FRP) packaged and modular pump station enclosures. Standard Gorman-Rupp enclosures are made of durable fiberglass to resist corrosion, mildew, fungus, mold and UV rays, and provide a superior barrier to caustic or acidic atmospheres. J Series packaged submersible pumping system is used to transfer sewage to a treatment facility. Air-driven diaphragm pumps are used to transfer thickened sludge from the dissolved air flotation tanks to the digesters. A Gorman-Rupp packaged pump station in Norway transfers sewage to a treatment plant.
G O R M A N - R U P P P U M P S ENGINEERED PUMPING WORLDWIDE RECOGNITION Gorman-Rupp is a leading manufacturer of engineered pumping systems, vital systems that are relied upon for their dependability in water transmission and sewage handling in communities and municipalities the world over. We offer an extensive line of above-ground and below- ground self-priming pumping systems as well as a full line of solids-handling submersible pumping systems. These include pumps, motors, controls, piping and accessories, housed in a corrosion-resistant fiberglass enclosure that can be installed easily at the job site. Our pressure booster stations provide the solution to low line pressure in suburban locations. Our commitment to advanced technology and our manufacturing capability assure that we will continue to be a leader in the municipal market for years to come. Super T Series pumps with factory built controls are commonly used at wastewater plants for numerous applications, such as raw sewage transfer and sludge handling. Above-ground packaged sewage pump stations are utilized in wastewater collection systems for community expansions, as well as retrofitting of existing pump systems. Below-ground sewage pumping stations with their inconspicuous entrance tubes are widely used in residential areas. Pressure booster stations supply water to water towers and are widely used to boost low line pressure in commercial, industrial and residential areas. SYSTEMS YOUR SINGLE SOURCE SYSTEM RESPONSIBILITY An efficient and reliable pumping system is dependent on the precise matching of the pumps, motors and controls. Gorman-Rupp designs, engineers and manufactures the entire pumping system to ensure that the system meets your requirements and performs reliably year after year. When you buy from Gorman-Rupp, you never really buy just a pump. If there is a problem with the system you have to make only one call. From pumps and controls to the lights and fans in our enclosures, we have an experienced staff of engineers dedicated to their design and construction. Their extensive knowledge of electronics, mechanics and hydraulics is at your disposal. REPLACEMENT PARTS We ve invested a substantial amount of capital in a complete inventory of pumps and 60,000 plus parts. We believe available inventory is extremely important to our customers. Our promise is more than a slogan. We ship over 97% of parts orders within 48 hours. Gorman-Rupp understands the importance of a reliable pumping system and we will be here long after the system is installed to ensure that it continues to meet your requirements. You can rely on us from start to finish. FACTORY TRIPS* Factory educational trips let you view pump station assembly fabrication procedures and examine complete pump stations of various types. Our full-scale working pump displays simulate pumping conditions to demonstrate pump hydraulics, performance and electrical control operation. Our pump station showroom features various stations, including pumps, motors, controls, piping and valves. Station design and operation are explained in detail and performance characteristics of various stations are reviewed. *Contact your Gorman-Rupp representative for details.
G O R M A N - R U P P P A C K A G E D P U M P I N G Gorman-Rupp Packaged Pumping Stations are complete units: pre-engineered, pretested and ready for immediate hookup to power and piping. The stations contain an extensive selection of factory-tested pumps, motors, controls, valves and accessories. Above and below-ground stations are housed in corrosionresistant and mildew-resistant fiberglass enclosures. SEWAGE PUMPING STATIONS & SYSTEMS Above and below-ground stations are used in wastewater collection systems for community expansions as well as retrofitting of existing pump systems. Base Mounted Pump Station Size: 3" (75 mm) to 10" (250 mm) Max. Head: 130' (39.6 m) Max. Capacity: 3200 GPM* (201.9 lps) Max. Solids: 3" (76.2 mm) 6' x 6' Above-Ground Pump Station Size: 3" (75 mm) to 6" (150 mm) Max. Solids: 3" (76.2 mm) Max. Capacity: 1300 GPM* (82 lps) 7' x 10' Above-Ground Pump Station Size: 3" (75 mm) to 8" (200 mm) Max. Solids: 3" (76.2 mm) Max. Capacity: acity: 2100 GPM* (132.5 lps) Below-Ground Pump Station Size: 3" (75 mm) to 10" (250 mm) Max. Solids: 3" (76.2 mm) Max. Capacity: 3200 GPM* (201.9 lps) Station Sizes: 7'6" (2.31 m) & 10' (3.1 m) Base Mounted with Auto-Start Size: 3" (75 mm) to 10" (250 mm) Max. Head: 130' (39.6 m) Max. Capacity: acity: 3200 GPM* (201.9 lps) Max. Solids: 3" (76.2 mm) ASVP Packaged System Size: 3" (76.2 mm) to 6" (150 mm) Max. Solids: 3 (76.2 mm) Max. Capacity: 1200 GPM* (75.7 lps) Horsepower: 2.7 to 42 HP Modular Motor Control Centers Various liquid level controls Soft start & VFDs Engineered to your specifications *Single Pump Operation *Single Pump Operation Silent Pump with Auto-Start Size: 4" (100 mm) to 12" (300 mm) Max. Solids: 3.25" (82.6 mm) Max. Capacity: 6200 GPM* (391 lps) Trailer available with lights & brakes
S T A T I O N S P U M P S PRESSURE BOOSTER STATIONS Ideal for water tower applications and boosting low line pressure. Available in above and below-ground packaged stations. Auto-Start Booster Station Size: 2" (50 mm) Accepts Horizontal End Suction, Horizontal Split Case Base Mounted Booster Station Size: 1.25" (31.8 mm) and up Max. Capacity: 7000 GPM* (438 lps) 6' x 6' Above-Ground Booster Station Size: 1.25" (31.8 mm) to 6" (150 mm) Max. Capacity: 750 GPM* (47.3 lps) Accepts Vertical Multi-Stage, Vertical In-Line, Close Coupled End Suction, Horizontal Split Case Accepts Vertical Multi-Stage, Vertical In-Line, Close Coupled End Suction Solids-handling and high head pumps specifically designed to handle a wide variety of pumping applications. Patent Pending Ultra V Series Size: 3" (76.2 mm) to 6" (150 mm) Max. Capacity: 1900 GPM (123 lps) Max. Head: 168' (51 m) Max Solids: 3" (76.2 mm) Super T Series Size: 3" (76.2 mm) to 10" (250 mm) Max. Capacity: 3400 GPM (214.5 lps) Max. Head: 130' (39.6 m) Max Solids: 3" (76.2 mm) 2" available in T Series only Patent Pending UltraMate Size: 3" (76.2 mm) to 6" (150 mm) Max. Capacity: 1900 GPM (123 lps) Max. Head: 325' (99 m) Max Solids: 3" (76.2 mm) Super U Series Size: 3" (76.2 mm) to 6" (150 mm) Max. Capacity: 1500 GPM (95 lps) Max. Head: 207' (63.1 m) Max. Solids: 1.25" (31.8 mm) G O R M A N - R U P P P U M P S P E C I F I C A T I O N S 7' x 10' Above-Ground Booster Station Size: 1.25" (31.8 mm) to 6" (150 mm) Max. Capacity: 1300 GPM* (82 lps) Accepts Vertical Multi-Stage, Vertical In-Line, End Suction, Horizontal Split Case (up to 4") Modular Enclosures Station Size: 8' (2.4 m) x 8' (2.4 m) to 24' (7.3 m) x 40' (12.2 m) *Single Pump Operation Ramparts P and ipc Series Size: 1.5" (38 mm) to 6" (150 mm) Max. Capacity: 350 GPM (22.1 lps) Max. Head: 220' (67.1 m) Max. Solids: 4" (100 mm) J Series Size: 3" (76.2 mm) to 20" (508 mm) Max. Capacity: 15,000 GPM (946.4 lps) Max. Head: 270' (82.3 m) Max. Solids: 5.7" (114.3 mm) Horsepower: 2.7 to 215 HP
G O R M A N - R U P P P U M P S ANY TIME. ANYWHERE. SOLD AND SERVICED THROUGHOUT THE WORLD Gorman-Rupp has over 1,000 distributors tors throughout the United States and the world who are qualified to give expert advice on pump selection and application. If you have a service problem, a factory-trained distributor is not far away. They are backed by the fastest parts service in the industry, so you know the parts will be there when you need them. Manufacturing Facilities Distribution Centers The Gorman-Rupp Company Mansfield, Ohio Gorman-Rupp Industries Division Bellville, Ohio Mansfield Division Mansfield, Ohio The Gorman-Rupp International Company Mansfield, Ohio Patterson Pump Company Toccoa, oa, Georgia American Machine and Tool Co., Inc. of Pennsylvania Royersford, Pennsylvania Patterson Pump Ireland Limited County Westmeath, Ireland Gorman-Rupp of Canada Limited St. Thomas, Ontario, Canada Distribution Centers Sparks, Nevada Sand Springs, Oklahoma Leeuwarden, Netherlands Bangkok, Thailand Product information is subject to change; consult factory for details. AV-05533_REV0308 The Gorman-Rupp Company Mansfield Division P.O. Box 1217 Mansfield, Ohio 44901-1217, USA Tel: 419-755-1011 Fax: 419-755-1251 E-mail: grsales@gormanrupp.com The Gorman-Rupp International Company P.O. Box 1217 Mansfield, Ohio 44901-1217, USA Tel: 419-755-1011 Fax: 419-755-1266 E-mail: intsales@gormanrupp.com GRpumps.com 2008 The Gorman-Rupp Company. All rights reserved. Gorman-Rupp of Canada, Ltd. 70 Burwell Road St. Thomas, Ontario N5P 3R7, Canada Tel: 519-631-2870 Fax: 519-631-4624 E-mail: grcanada@grcanada.com Printed in the USA