Contents Enclosures IP65... 6-2 ArTu... 6-7 ArTuK... 6-8 ArTuM... 6-9 Unifix... 6-10 ABB LIMITED 6/1
IP65 Sheet Steel Plain Door (mounting plate included) Height 300 400 Height mm 300 300 300 400 400 400 400 Width mm 200 300 400 300 300 400 600 Depth mm 150 150 150 150 200 200 200 Part Number SR3215 SR3315 SR3415 SR4315 SR4320 SR4420 SR4620 ABB LIMITED 6/2
IP65 Sheet Steel 500 600 700 800 1000 1200 500 500 500 600 600 600 700 700 800 800 800 1000 1000 1000 1200 1200 300 400 400 400 400 600 500 500 600 600 800 600 600 800 600 800 200 200 250 200 250 250 200 250 250 300 300 250 300 300 300 300 SR5320 SR5420 SR5425 SR6420 SR6425 SR6625 SR7520 SR7525 SR8625 SR8630 SR8830 SR10625 SR10630 SR10830 SR12630 SR12830 Glazed Door Height 500 600 700 800 1000 1200 Height mm 500 500 600 600 700 700 800 800 1000 1000 1000 1200 1200 Width mm 400 400 400 400 500 500 600 600 600 600 800 600 800 Depth mm 200 250 200 250 200 250 250 300 250 300 300 300 300 Part Number SR5420V SR5425V SR6420V SR6425V SR7520V SR7525V SR8625V SR8630V SR10625V SR10630V SR10830V SR12630V SR12830V Automation Kit: Plain inner door and mounting plate Part Number KA5040 KA5040 KA6040 KA6040 KA7050 KA7050 KA8060 KA8060 KA1060 KA1060 KA1080 KA1260 KA1280 Distribution Kit: Mounting profile for module panels No Vertical Modules (H185mm) No DIN Modules per row Total DIN Modules 2 2 3 3 4 4 5 5 5 6 6 14 14 14 14 25 25 25 25 36 25 36 28 28 42 42 100 100 125 125 180 150 216 Part Number KD5040 KD5040 KD6040 KD6040 KD8060 KD8060 KD1060 KD1060 KD1080 KD1260 KD1280 ABB LIMITED 6/3
IP65 Sheet Steel Modular Panels Hinged modular panels for modular equipment Modular panel + DIN rail with mount support No. vert modules No. DIN (H 185) W modules Order Code 1 400 14 PM 1414 1 600 25 PM 1625 1 800 36 PM 1836 Hinged modular panels for measuring equipment No vert modules (H 185) W Order Code 1 400 PS 2476 1 600 PS 2676 1 800 PS 2876 Hinged modular panels for measuring equipment No vert modules (H 185) W Order Code 1 600 PC 1606 1 800 PC 1806 2 600 PC 2606 2 800 PC 2806 DIN Spacer W Order Code 600 AP 6000 To place modular circuit breaker and ABB SACE Isomax 1 and S2 series box circuit breakers side by side. DIN Rail with Mounting Support No DIN W Modules Order Code 400 14 GD 4006 600 25 GD 6006 800 36 GD 8006 ABB LIMITED 6/4
IP65 Sheet Steel Spare Mounting Plates Height Width Order Code 300 200 PF 3020 300 300 PF 3030 300 400 PF 3040 400 300 PF 4030 400 400 PF 4040 400 600 PF 4060 500 300 PF 5030 500 400 PF 5040 600 400 PF 6040 600 600 PF 6060 700 500 PF 7050 800 600 PF 8060 800 800 PF 8080 1000 600 PF 1060 1000 800 PF 1080 1200 600 PF 1260 1200 800 PF 1280 ABB LIMITED 6/5
IP65 Sheet Steel Modular Stacking W D H1 + H2 H total 400 200 400 400 800 400 200 400 500 900 400 200 400 600 1000 400 200 500 500 1000 400 200 500 600 1100 400 200 600 600 1200 400 250 500 500 1000 400 250 500 600 1100 400 250 600 600 1200 600 250 600 600 1200 600 250 600 800 1400 600 250 600 1000 1600 600 250 800 800 1600 600 250 800 1000 1800 600 250 1000 1000 2000 600 300 800 800 1600 600 300 800 1000 1800 600 300 800 1200 2000 600 300 1000 1000 2000 IP55 Combining Gasket W D Order Code 400 200 GZ 4020 400 250 GZ 4025 600 250 GZ 6025 600 300 GZ 6030 Plinth (100mm H) W D Order Code 400 200 ZA 4020 400 250 ZA 4025 600 250 ZA 6025 600 300 ZA 6030 ABB LIMITED 6/6
ArTu The range of ABB SACE ArTu distribution switchboards provides a complete and integrated offer of switchboards and kit systems for constructing primary and secondary low voltage distribution switchboards able to satisfy all market requirements in terms of type installation, degree of protection, as well as electrical and mechanical characteristics. The ArTu switchboards designed and constructed by ABB SACE make it possible to construct wide range of configurations with a single range of accessories, and starting off from simple assembly kits, such as terminal wall-mounted distribution switchboards with modular circuit-breakers only, floor-mounted secondary distribution switchboards, switchboards equipped with moulded-case circuit-breakers, Power Center type primary distribution switchboards with a prevalance of moulded-case circuit-breakers and any internal segregations up to Form 4. The aim is to offer the user ABB SACE air, moulded-case and modular circuit-breakers a complete and integrated system of metalwork structure kits, to ensure maximum facility of assembly and cabling in accordance with the reference standards. In particular, integration with the apparatus has made it possible for ABB SACE to standardise a series of kits consisting of predrilled plates and panels, for installation of the whole range of Pro MSystem, Isomax and Tmax circuit-breakers, without the need for any additional drilling operations or adaptations. Special consideration has been given to cabling duct horizontally and vertically. Standardisation of the components is extended to internal segregation of the switchboard - a feature increasingly prescribed by designers to allow access to the cabled switchboard for maintenance operations without interrupting service continuity on the various output circuits. Internal segregation of ArTu switchboards is therefore a simple operation to carry out using the special standardisation kits, and does not require either construction of made-to-measure switchboards or any additional sheet cutting, bending or drilling work. ABB LIMITED 6/7
ArTuK The structure is made entirely of hot galvanised steel sheet, which, thanks to its construction characteristics, guarantees the equipotentiality of the switchboard. Base and top are supplied pre-mounted by means of a three-way joint which is able to provide considerable stuctural rigidity. The base is fitted with removable flanges which allow entry into the areas reserved for cables, of different size and number. The base strip (H=100mm), with removable flanges over the whole perimeter, is intergrated directly with the base. Moreover, it is possible to make the base reversible with the roof by removing the base strip so that there is cable entry into the top part. Technical Characteristics Compliance with standards CEI EN 60439 Rated service voltage - Ue Rated insulation voltage - Ui Rated impluse withstand voltage - Uimp Rated frequency Rated current - In Rated short-time short-circuit current - lcw Rated peak short-circuit current - lpk Degree of protection up to 690 V upt o 1000 V 8 kv 50-60 Hz up to 3200 A up to 150 ka up to 254 ka 31 without door 41 with door and ventilated panel 65 with door and blind panel The four uprights are fitted with a multi-purpose hinge used to assemble the door and to couple the structures, both laterally and at the rear. The switchboard structure is completed with two types of functional frames, fitted with reference nicks (at 100mm pitch) to avoid annoying measurements during assembly of the kits for the apparatus: - open functional frame (can be used in switchboards where no form of segregation is required); - closed functional frame (can be used in switchboards where forms 2-3 and 4 segregation are required). The switchboard is completed with: - blind (IP65) and ventilated (IP41) type side panels; - blind and transparent doors, fitted with safety glass which can be mounted on all sides (IP65). The K series of ArTu switchboards consists of a series of components for configuration of floor-mounted kit switchboards, with the following dimensions: Three heights 1600mm (16 modules of 100mm), 1800 (18 modules of 100mm) and 2000mm (20 modules of 100mm); Three widths 400mm (12 DIN modules), 600mm (18 DIN modules) and 800mm (36 or 24 DINmodules + cable riser); Four depths 250mm (for Isomax up to fixed S6), 350mm (for Isomax up to fixed S6), 600mm (for Isomax up to fixed S8) and 800 (for Emax up to withdrawable E3). ABB LIMITED 6/8
ArTuM The ArTuM switchboards offer a simple and functional solution for constructing secondary distribution switchboards. They can be wall- or floor-mounted, only requiring assembly of the front door and side panels thanks to there characteristic monoblock structure. Within the series, the wall-mounted switchboards are preset for installation of Pro MSystem modular apparatus and Isomax S1, S2, S3, Tmax T1, T2 and T3 moulded-case circuit-breakersand the unifix system. The wall-mounted models include in two depths (150 and 200mm), a functional width of 24 DIN modules (600mm) and four different heights (600, 800, 1000 and 1200mm), corresponding to 3, 4, 5 and 6 rows of modular apparatus respectively. The degree of protection is IP65. The floor-mounted switchboards have a depth of 250mm and are available in two functional widths (600mm 24 DIN modules and 800mm 36 DIN modules or 24 DIN modules plus cable riser) in four heights (1400, 1600, 1800 and 2000mm), corresponding to 7, 8, 9 and 10 rows of modular apparatus respectively.the maximum rated current is 630 A and the degree of protection varies from IP31 (without front door)to IP65 (with front door). All the models allow installation of Pro MSystem modular apparatus and Isomax S1... S6 and Tmax moulded-case fixed version circuit-breakers with front terminals, of busbars systems up to 800 A and of the Unifix system.the sides of the M series floor mounted switch-boards consist of two removable side panels which allow lateral coupling of the structures or cable containers. The front door, available either made of transparent tempered glass applied from the inside, or in steel sheet, can be replaced according to the different application requirements by finishing frames with IP31 degree of protection. Once again, for this type of M series switchboards, it is in any case possible to carry out fixing to the wall using dedicated brackets (to be ordered seperately - code AA 1206). They are also prepared in the bottom and top area with removble flanges for conductor inlet. The base strip 100mm high, complete with removable flanges, is already mounted on the structure, and allows easy handling with transpallets. Technical characteristics Wall Floor D=150/200 D=250 Compliance with standards CEI EN 60439-1 Rated service voltage - Ue up to 690 V Rated insulation voltage - Ui up to 1000 V Rated impluse withstand voltage - Uimp 8 kv Rated frequency 50-60Hz 50-60Hz Rated current - In up to 250 A up to 630 A Rated short-time short circuit - lcw up to 25 ka up to 35 ka Rated peak short-circuit current - lpk up to 52.5 ka up to 74 ka Degree of protection IP 31 without door 65 with door 65 with door ABB LIMITED 6/9
Unifix Cabling System Main Characteristics Four-pole Frames The frames consist of a system of busbars (25x5mm section ED2507, ED2515 and 20 x 5mm section for ED2506, ED2514) with 400A capacity and 50kA short-circuit current. The various basic modules dedicated to connection of the apparatus are fixed to this structure which, together with the power supply module, provide the following circuit situations: direct supply of the bases by means of the power supply module (ED2522) power supply with main row circuit-breaker by means of a dedicated base module. The frames, which can be installed in ArTu switchboards 600 and 800mm wide respectively, area available in the two 24 and 36 module widths. They are fixed to the structure by means of the special kits AD1060 for the H=200mm module or AD1061 for the H=300mm module. Power Supply Module The 400A power supply module (L1-L2-L3-N) is fixed onto the rear side of the frames, therefore without losing any space dedicated to assembly of the equipment on the front. The power supply module allows direct connection (by means of the hammer screw AD1064) to the 400/800A busbar system with shaped section, installed on the back of the cabinet. Base module for apparatus The modules have the function of mechanically supporting the apparatus and electrically connecting it to the distribution busbars. ABB LIMITED 6/10