VL Series Electric Forklift Trucks with AC Technology 2,200, 2,00, 3,000 and 3,00 HiP and elo performance settings Stop automatic park brake Lowest whole body vibration (WBV) levels Continuous stability enhancement (C) Oil-immersed brakes CANbus technology
Truck Dimensions Ast = W a + R + a h4 4. α 4.1 β Wa R = (l6 + x) + (b12-b13) 2 2 Ast 4.33/4.34 Add mm for GN9 4.3 h3 4.4 h6 4.7 h1 4.2 h7 4.8 b1 4.21 b10 3.6 e 4.22 b11 3.7 h2 4.3 s m1 4.31 4.22 I 4.22 x 1.8 m2 4.32 I 4.20 h10 4.12 l1 4.19 ERP22 VL, 2 VL SWB, 2 VL LWB mast details and capacity ratings () - Supercushion tyres Model Tyres Width across tyres Masts LFL (V) FFL (F) 3 Stage FFL (E) OAH FFH h1 h2+s 219 140 239 140 274 140 299 140 219 162 239 182 274 217 214 19 239 184 29 204 MFH h3+s 3390 3790 4330 4830 3400 3800 4420 490 0 0 h4 396 436 4896 396 3966 4366 46 496 6096 646 Tilt F B ERP 22 VL Forks 00 2000 1900 2000 1830 2000 1900 2000 1820 2000 0 1990 1810 2000 1880 10 1800 2000 1900 2000 1830 2000 0 2000 1820 2000 1880 1990 1810 2000 1870 1970 1790 2110 1920 1780 1870 1 2020 1830 1 1790 1630 00 2190 2180 10 ERP 2 VL SWB Forks Integral Sideshift 00 2480 2310 2210 220 2210 2 2000 2140 2130 2120 2140 2130 2120 1930 1840 00 2490 2490 2470 2490 2480 2400 220 210 220 220 2240 2210 2260 220 2240 2030 1940 200 2040 2010 200 2040 10 180 1770 ERP 2 VL LWB Forks Integral Sideshift 00 2410 2310 2190 2 2160 210 2160 210 2140 200 1960 00 2380 2290 220 210 2080 1960 0 ERP30 VL, ERP3 VL mast details and capacity ratings () - Supercushion tyres Model Tyres Width across tyres Masts LFL (V) FFL (F) 3 Stage FFL (E) OAH FFH MFH Tilt h1 219 239 274 299 219 29 284 214 229 239 264 h2+s 14 14 14 14 13 193 218 160 170 2000 h3+s 3200 3 4 4 320 390 440 4610 4910 210 810 h4 3861 4261 4761 261 3862 462 062 22 2 82 642 F B All capacities calculated with 0mm long forks and are less load backrest. * Wide Tread Required ERP 30 VL Forks Integral Sideshift 00 2920 2960 2970 2900 2840 2690 260 2690 2630 270 20 240 230 2460 20 230 2380 220 20 2660 280 2660 0 0 260 230 2430 2360 2430 2390 2390 2340 2280 210 00 2960 290 2940 280 2960 2940 2900 2900 2830 2760 2 00 300 300 300 3410 300 300 340 3460 3400 3320 * 3170 * Forks 3090 3080 3010 * 2870 * ERP 3 VL Integral Sideshift * 2640 * 00 3440 3430 3420 3330 3440 3420 3370 3370 3300 3220 * 3060 * 3110 3 3090 3010 3110 3090 300 300 20 2920 * 2760 * 2660 * 220 *
VDI 21 - General Specifications 1.1 Manufacturer 1.2 Model designation ERP 22 VL SWB ERP 22 VL SWB ERP 2 VL SWB ERP 2 VL SWB Characteristics 1.3 1.4 1. 1.6 Model -Maunfacturers designation Power: battery, diesel, LPG, electric mains Operation: manual, pedestrian, stand, seat, order picker Load capacity Load centre Q () c (mm) 00 00 00 00 1.8 Load distance x (mm) 1.9 Wheelbase y (mm) Weights 2.1 2.2 2.3 Unladen weight (max. battery) Axle loading laden, front/rear (max. battery) Axle loading unladen, front/rear (max. battery) 446 61 1014 2212 223 446 61 1014 2212 223 446 6120 84 2212 223 446 6120 84 2212 223 3.1 Tyres: L=pneumatic,V=cushion =supercushion Wheels & Tyres 3.2 3.3 3. 3.6 Tyre size, front Tyre size, rear Number of wheels, front/rear (X = driven) Track width, front. b10 (mm) 938 104 938 104 938 104 938 104 3.7 Track width, rear b11 (mm) 4.1 Mast tilt, forward α /back β degrees 4.2 Height of mast, lowered h1 (mm) 4.3 Free lift h2 (mm) 4.4 Lift height h3 (mm) 330 330 330 330 4. Height of mast, extended h4 (mm) 4.7 Height to top of overhead guard h6 (mm) 4.8 height h7 (mm) 7 7 7 7 4.12 Towing coupling height h10 (mm) Dimensions 4.19 4.20 4.21 4.22 Overall length Length to face of forks Overall width Fork dimensions I1 (mm) l2 (mm) b1/b2 (mm) s/e/l (mm) 40 0 40 0 40 0 40 0 4.23 Fork carriage DIN 1. Class, A/B 4.24 Fork carriage width b3 (mm) 4.31 Ground clearance under mast, laden m1 (mm) 4.32 Ground clearance at centre of wheelbase m2 (mm) 4.33 Aisle width with pallets 1 000mm x 1 200mm wide Ast (mm) 3 3 3 3 4.34 Aisle width with pallets 800mm x 1 200mm long Ast (mm) 371 371 371 371 4.3 Outer turning radius Wa (mm) 4.36 Inner turning radius b13 (mm).1 Travel speed with/without load km/h 18.0 18.0 21.0 21.0 18.0 18.0 21.0 21.0.2 Lifting speed with/without load m/sec 0.40 0.63 0.2 0.72 0.38 0.63 0.49 0.72.3 Lowering speed with/without load m/sec 0.7 0.1 0.7 0.1 0.7 0.1 0.7 0.1 Performance..6.7 Drawbar pull with/without load, 60 minute rating Maximum drawbar pull with/without load, minute rating Gradeability with/without load, 30 minute rating N N % 4 773 1804 1902 10 14 601 623 149 2076 11 16 91 726 1841 18897 9 13 6037 618 17 20409 10 14.8 Maximum gradeability with/without load, minute rating % 26 39 28 42 24 3 26 38.9 Acceleration time with/without load sec 4.42 4.11 4.04 3.71 4.4 4.11 4.04 3.71.10 Service brake 6.1 Drive motor output, (S2 60 minute rating) kw 6.2 Lifting motor, (S3 1% rating) kw Motor 6.3 6.4 DIN 4331/3/36 A, B, C, no voltage/capacity at hr rate V/Ah 4336A 80 60 4336A 80 60 4336A 80 60 4336A 80 60 6. weight (min/max) 1480 163 1480 163 1480 163 1480 163 6.6 Energy consumption in accordance with VDI cycle kwh/h 6. 7.1 7.00 7.87 8.1 Drive control 8.2 Working pressure for attachments bar 1 1 1 1 Other 8.3 8.4 Oil flow for attachments, manual hydraulics Average noise level at operator's ear l/min db (A) 8. Towing coupling type LPAZ,measured according to the test cycles and based on the weighting values contained in EN1203. Maximum flow set through dash display. Bottom of forks. Full Suspension specified. Compressed condition, add 40mm for nominal position. Without load backrest. Add 28mm with load backrest.
1.1 ERP 2 VL LWB ERP 2 VL LWB ERP 30 VL LWB ERP 30 VL LWB ERP 3 VL LWB ERP 3 VL LWB 1.2 00 00 00 00 300 00 300 00 1.3 1.4 1. 1.6 Characteristics 1.8 170 170 170 170 170 170 1.9 4876 619 1181 2403 2473 4876 619 1181 2403 2473 4910 6 904 2443 24 4910 6 904 2443 24 22 7714 1011 2391 2834 22 7714 1011 2391 2834 2.1 2.2 2.3 Weights 3.1 938 104 938 104 938 104 938 104 938 104 938 104 3.2 3.3 3. 3.6 Wheels & Tyres 3.7 4.1 4.2 4.3 330 330 31 31 31 31 4.4 386 386 386 386 4. 2 193 2 193 2 193 4.7 7 7 7 7 7 7 4.8 4.12 346 246 40 0 346 246 40 0 346 246 0 120 0 346 246 0 120 0 3 2 0 120 0 3 2 0 120 0 4.19 4.20 4.21 4.22 Dimensions 4.23 4.24 4.31 4.32 3736 3736 3747 3747 3813 3813 4.33 3891 3891 3903 3903 3969 3969 4.34 2139 2139 4.3 4.36 18.0 18.0 21.0 21.0 17.0 18.0 19. 21.0 18.0 18.0 21.0.1 0.38 0.63 0.49 0.72 0.33 0.9 0.42 0.63 0.31 0.9 0.37 0.63.2 0.7 0.1 0.7 0.1 0.6 0.46 0.6 0.46 0.8 0.46 0.8 0.46.3 91 726 1841 18897 9 13 6037 618 17 20409 10 14 441 88 1796 18441 8 12 877 603 19393 19916 9 13 478 720 18076 1887 7 12 918 6177 1922 2038 8 13..6.7 Performance 24 3 26 38 22 34 24 37 20 32 22 3.8 4.4 4.11 4.04 3.71 4.6 4.18 4.14 3.78 4.60 4.23 4.19 3.83.9.10 6.1 6.2 4336A 80 4336A 80 4336A 80 4336A 80 4336A 80 4336A 80 6.3 6.4 Motor 1770 196 1770 196 1770 196 1770 196 1770 196 1770 196 6. 7.89 8.86 8.66 9.74 10.03 11.28 6.6 8.1 1 1 1 1 1 1 8.2 8.3 8.4 Other 8. h6 subject to +/- mm tolerance. Add 20mm with cab option. Add 104mm for battery side removal option. Add 124mm for battery side removal with cab option. Specification Sheet based on trucks with: Standard seat, overhead guard, standard carriage, 0 mm forks with load backrest, elo setting with DIN battery configuration. 2 stage LFL mast :- ERP20-2VL - 3390 mm, ERP30-3VL - 3200 mm.
VL Series Models: 22VL, 2VL SWB and LWB, 30VL and 3VL The VL series is available in two configurations &. With enhanced performance characteristics, the configuration has been designed to operate in intensive, high productivity applications with long runs and high lifts as an effective alternative to an engine-powered truck. For example, in comparison to the configuration, top speed (laden) has been increased to up to 21 km/h with faster acceleration, and lifting speeds have been increased by 27%. AC Technology AC technology Class H traction motors are suitable for the most arduous applications. Smooth forward and reverse directional changes provide seamless driving action. In the high-performance or HiP setting, AC technology provides increased acceleration, even when fully laden and on gradients. As well as improving performance, AC technology reduces maintenance and allows service intervals of 0 hours for most components. Brakes The truck is equipped with oil immersed brakes and Stop an automatic park brake spring applied, electro magnetically released park brake. The park brake is automatically set by the control system, so that the brake is always set whenever the truck is not moving, and no traction has been requested. Moreover the park brake provides controllability on ramp applications. When the footbrake is applied the intelligent control system uses e- Boost which increases the strength of the autoregen function of the traction motors. This also decreases the amount of work executed by the oil immersed disc brakes resulting in reduced wear on the brakes. Steering A 16kW () or 24kW () AC motor drives a pump which provides oil pressure for the hydraulic pump and for steering, eliminating the need for a separate steering motor and pump. The steering column is infinitely adjustable in a range of 26º. During cornering the speed of the drive motors is continuously adjusted independently by the traction controller ensuring smooth operation. The VL features a state-of-the-art extended steer-axle that has increased articulation of the steer wheels, allowing it to turn in smaller spaces than a conventional 4-wheel steeraxle. Performance modes Performance of the truck can be tailored via the enhanced overhead display, with 4 performance modes available to suit the requirements of the application or the preferences of the driver. For maximum speed and acceleration, choose mode 4, or for more delicate maneuvering and extended battery life, mode 1 is ideal. Your service technician can alter the top speed and acceleration of mode 4, with modes 1, 2 and 3 being automatically adjusted as percentages of setting 4. elo and HiP Settings VL trucks feature an elo energy saving setting which provides exceptional energy efficient performance when required for continuous operation over longer periods without recharging the battery. The HiP high performance setting (accessible via the dash display with a service password) changes the torque curve characteristics of the motor to give the truck increased torque, faster acceleration and increased speed on a grade for the most demanding applications whilst maintaing the same top speed as the elo setting. elo provides maximum battery autonomy. Improved ergonomics The VL is designed for optimum operator comfort. The overhead guard mounted grab handle, seat armrest (hinged) and very low step height provide class leading three point entry and exit to the operator module. The operator is seated in an ergonomically designed position for maximum safety, comfort, visibility and ease of operation. A new full suspension seat provides 80mm of suspension and the lowest WBV levels in the industry. A swivel seat option for a superior reverse driving position is available. Both the mini-lever module and the manual levers have an integrated direction switch. The ergonomically designed gas spring assisted steering column has infinite forward and reverse adjustment through 26 0, can be telescopically adjusted by 7mm. Synchronised steering which further increases operator comfort and operation also features steer column memory tilt (option). The truck also features generous floor and storage space. The clear footwell allows easy access from both sides of the truck when the optional mini lever module fitted. Continuous Stability Enhancement (C) This is a mechanical system which uses gravity to optimize the design geometry of the steer axle. It reduces lean by limiting the articulation of the steer axle and does not compromise the trucks ability to operate over poor ground conditions or traverse obstacles. It is also % maintenance free. Masts A full range of Hi-Vis 2 stage LFL and 2 and 3 stage FFL masts are available. Hi-Vis masts are designed for maximum visibility, with widely spaced channels, lift chains and main lift cylinders. A choice of DIN batteries from 60Ah/620Ah - Ah/77Ah (wheelbase dependent) are available. The short wheelbase model (SWB) has a smaller capacity battery and delivers increased maneuverability and reduced stacking aisle dimensions. The long wheelbase model (LWB) provides extra battery space for longer shift life. A battery discharge indicator (BDI) and lift interrupt are standard on all trucks. Low lifetime costs Lower service costs are achieved as a result of less maintenance associated with oil immersed brakes, hall effect sensors, electric park brake and CANbus and AC technology. The transmission is sealed for life, eliminating the need for service, an oil change is required at 4000 hours. LED light packages are offered as an option. Service intervals are 0 hours for most components and 4000 hours for oil immersed brakes, drive axle, transmission and hydraulic oil. Auto Regen Braking optimises the shift life of the battery and contributes to an increase in the life of parts.
Options Accutouch mini-levers Return to set tilt (RTST) Foot directional control Lighting kits, including LED lights Reverse alarm Integrated sideshift Two battery extraction methods:1. Overhead 2. Side extraction Weather protection NACCO Materials Handling Limited trading as Europe Materials Handling Flagship House, Reading Road North, Fleet, Hampshire GU1 4WD, United Kingdom. Tel: + 44 (0) 122 770 Fax: + 44 (0) 122 770784 www.yale-forklifts.eu Country of Registration: England. Company Registration Number: 02637 Safety. This truck conforms to the current EU requirements. Specification is subject to change without notice. Publication part no. 287299 Rev.03 Printed in The United Kingdom (1210HG) EN is a registered trade mark. Europe Materials Handling 2010. All rights reserved. Truck shown with optional equipment