National Crane Series NBT60 Product Guide

Similar documents
Boom truck 55 tons. national nbt50/55. BOOM LENGTHS: 32 to 128 ft JIB LENGTHS: 26 to 45 ft JIB OFFSETS: 0-30

NTC55 Product Guide. Features. ASME B30.5 Imperial 85% 49,9 t (55 USt) capacity at 2,44 m (8 ft)

National Crane Series NBT45 Product Guide

National Crane Series NBT45 Product Guide

National Crane Series NBT40

Three-position, out and down style outriggers with lighter polymeric floats

LOAD CHARTS NBT45 85% STABILITY ON OUTRIGGERS

LOAD CHARTS NTC55 85% STABILITY ON OUTRIGGERS

Boom truck 36 tons. national series BOOM LENGTHS: 31ft to 127ft JIB LENGTHS: 31ft JIB OFFSETS:

TMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane

TMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane

National Crane Series NBT36

National Crane Series NBT30H

RT535E. product guide. contents. features 35 ton (35 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.

GIUFFRE.COM. National Crane 500E2 Series GIUFFRE BROS CRANES INC. Product Guide

product guide contents features 40 ton (40 mt) Capacity Truck Mounted Crane 29 ft.-95 ft. ( m) 4 section, full power synchronized boom

ROUGH TERRAIN HYDRAULIC CRANE RT875BXL

24,000 lb. ( kg) counterweight with hydraulic removal system. Cummins ISM 450, six cylinder after cooled 450 hp (336 kw)

RT530E. product guide. contents. features 30 ton (30 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.

National Crane Series NBT50

Grove TMS700E. Product Guide. Features. 50 t or 55 t (50 USt or 60 USt) capacity

30' BOOM 13' 8" (4166) 24' BOOM 11' 8" (3556) 1' 8-1/2" (521) 3' 8-1/2" (1129) 15' 9-1/2" (4813) 17' 9-1/2" (5421)

National Crane Series NBT50

rough Terrain crane 60 tons

National Crane Series 800H

National Crane Series NBT45

Dimensions Turning Radius (6.4m) 2 Wheel Steer /2 (3.6m) 4 Wheel Steer

600H Product Guide. Features. ASME B30.5 Imperial 85% Standard RCL System. 18,1 t (20 USt) rating

RT540E. product guide. contents. features. Rough Terrain Hydraulic Crane. Features 2. Specifications 3. Dimensions ton (35 mt) capacity

features also available.

Tire Size 26.5 x 25 5' 5-1/2" (1661) 12' 2-1/4" (3715)

TECHNICAL SPECIFICATIONS

RT530E-2. product guide. contents. features. Rough Terrain Hydraulic Crane. Features 2. Specifications ton (27 mt) capacity.

National Crane Series NBT15

Series 900A. product guide. contents. features. 103' Four-Section Boom. Features Ton Rating. Self-lubricating Easy Glide Wear Pads

40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area

WORKING RANGE DIAGRAM

NATIONAL MODEL 990A - 26 TON CAPACITY

TMS x 4 & 6 x 6

View thousands of Crane Specifications on FreeCraneSpecs.com

Working Range GROVE MODEL TM TON CAPACITY. LIFTING CHARTS - Hydraulic Truck Cranes 9'-7"

RT875E. product guide. contents

RT875E. product guide. contents

Series 400B. product guide. contents. features. 56' Three-section boom. Features Ton rating. Internal anti-two-block. Mounting Configurations 3

Series 400B. product guide. contents. features. 56' Three-Section Boom. Features Ton Rating. Internal Anti-two-block. Mounting Configurations 3

RT875E. product guide. contents

TECHNICAL SPECIFICATIONS

50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height

43' (13.07) 18' 4" (5.59 ) 18' 6" (5.64) Turning Radius: TMS870-45' 1" (13.7 m) TTS870-29' 8" (9.04 m) (8 wheel)

Series 1300A. product guide. contents. features. All New Design. Features ' Four-Section Boom. Mounting Configurations 3.

Series 600E. product guide. contents. features. All New Design. Features 2. 90' Four-Section Boom. 20 Ton Rating. Mounting Configurations 3

400B Product Guide. Features. ASME B30.5 Imperial 85% 9,1 t (10 USt) rating. Multiple mounting configurations. 17,1 m (56 ft) three-section boom

National Crane Series 800D Product Guide ASME B30.5 Imperial 85%

CROSSOVER 4500L. 45T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.

RT700E. product guide. contents

Series 500E. product guide. contents. features. All New Design. Features 2. 71' Three-Section Boom. 18 Ton Rating. Mounting Configurations 3

RT600E. product guide. contents


TMS700E. product guide. contents. features 50 or 60 ton (50 or 55 mt) Capacity. Truck Mounted Hydraulic Crane. Features 2

CROSSOVER T capacity class Boom truck crane Datasheet imperial

RT700E. product guide. contents

TMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom

CROSSOVER Datasheet imperial. Boom Truck Crane 60T capacity class. Features

32117R TECHNICAL SPECIFICATIONS 32117R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height

TRUCK MOUNTED HYDRAULIC CRANE

UPTime is the Manitex commitment to complete support of thousands of units working every day.

TMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom

National Crane Series 1300A

Courtesy of Crane.Market

PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE

series 2802 product guide features BOOM TRUCKS

TADANO MODEL TM TON CAPACITY

CONTENTS CM300.1 SERIES TELESCOPIC CRANE

Grove TMS9000E. Product Guide. Features

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:

TMS9000E Product Guide

KEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.

Grove RT890E. Introduced: Capacity: 90 US (80 Metric) Tons

National Crane 1800 Series

Grove TMS800E Product Guide

1560F TECHNICAL SPECIFICATIONS 1560F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 3 Overall Height

PRELIMINARY CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.

National Crane 400B Series

TMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom

data model 2892S product guide contents features 28 ton (25,4 mton) capacity 4-section, 92' (28,0 m) proportional boom

CROSSOVER T capacity class Boom truck crane Datasheet imperial

CROSSOVER 8000 CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. Features

RT530E-2 Product Guide

30105F TECHNICAL SPECIFICATIONS 30105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height

Courtesy of Crane.Market

LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER

Series product guide. contents. features. View thousands of Crane Specifications on FreeCraneSpecs.com. 127 ft (38.70 m) Five-Section Boom

RT 345 XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:

Grove RT540E. Product Guide. Features. 35 t (40 USt) capacity. 9,8 m 31 m (32 ft 102 ft) 4-section full power boom

series 5002 B O O M T R U C K S

CONTENTS TC500 SERIES TELESCOPIC CRANE

Grove YB Product Guide. Features. ASME B30.5 Imperial 85%, Metric 85%, DIN/ISO. 13,6 t (15 USt) capacity

Series 1400 Hydraulic Crane 33 Ton Load Ratings

RT XL RT XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:

data models 30100C 30124C product guide contents features 30 ton (27,3 mton) capacity 5-section 124' (37,8 m) proportional boom

Transcription:

National Crane Series NBT Product Guide ASME B30.5 Imperial % Features 39,01 m (128 ft) five-section full power boom 54,4 t ( USt) at 2,44 m (8 ft) Self-lubricatg Easy Glide wear pads Hydraulically removable counterweight system Heavy lift load charts available

Features National Crane NBT 54,4 t ( USt) maximum capacity 41,1 m (1 ft) maximum tip height (ma boom) 54,6 m (179 ft) maximum tip height (boom with extension) Five-section boom The Series NBT is equipped with a 39,0 (128 ft) boom. An optional 7,9 m - 13,7 m (26 ft - ft) two-section offsettable manual extension is available. Counterweight Two-piece 1361 kg ( lb) each (total 2722 kg [00 lb]) hydraulically removable counterweight slabs. Removable counterweight slabs can be stowed on front outrigger box for roadg. Outriggers Equipped with left and right ground-level and cab CANbus outrigger controls. The Series NBT outriggers allow quick and easy crane set-up and cludes a new outrigger beam position sensg system that aids the operator selectg the right load chart based on the crane s outrigger footprt. The front outrigger box has an X-shaped footprt that elimates the need for a sgle front outrigger. Dimensions: Full span: Front: 7,09 m (23 ft 3 ) Rear: 7,39 m (24 ft 3 ) Mid span: Front: 4,72 m (15 ft 6 ) Rear: 4, m (16 ft 1 ) Retracted-front and rear: 2,39 m (7 ft 10 ) Deluxe operator s cab The Series NBT operator s cab cludes all-steel construction with acoustical lg and tted glass throughout, air conditiong, deluxe seat with arm rest mounted sgle-axis electric controllers, wdshield and slidg skylight with electric wipers, diesel heater with defroster, circulatg fan, fire extguisher, and dual cab mounted work lights.

Features *Product may be shown with optional equipment. National Crane is proud to troduce the Series NBT crane The Series NBT represents the pnacle of mache performance, combg the latest both hydraulic and electronic mache control. This new product provides premium operator comfort with the latest Manitowoc cab design, simplified mache setup with no need for an SFO and front bumper control of the hoist(s). The cable follower will keep constant tension on the rope reducg the potential for bundlg Speedy-reeve boom tip and sheave blocks simplify riggg changes by decreasg the time needed to change le reevg Easy Glide boom wear pads reduce the conditions that cause boom chatter and vibration. The net result is smoother crane operation Pressure compensated, load sensg hydraulic system - PTO mounted axial piston pump - Superstructure mounted reservoir with tegral suction valve/filter, return filter, sight gauge, and temperature gauge - Oil cooler with 6 mm (16 ) fan and temperature sensor - Pressure transducers tegral to the lift cylder holdg valve LMI system features a 178 mm (7 ) graphical, color display, data logger, error codg, and a USB connection port. Real time crane formation is displayed with numerous operator features cludg: soft metric load chart conversion, hydraulic filter change remders, an electronic hour meter, and truck diagnostics (fuel level, coolant temperature, and DPF status). The display console allows each crane control function to be set dependently to reduce speed (%, %, %, and 30%) Dual axis controls are optional for superior operator control, along with standard air conditiong, a diesel heater and ergonomic seat

Contents Specifications 5 Weights 7 Mountg configurations 8 Dimensions 10 Heavy lift (workg range and load charts) 12 Mimum truck (workg range and load charts) 34 Accessories 56

Specifications Boom and extension combations data NBT-128: Equipped with a 9,7 m - 39,0 m (31.7 ft - 128 ft) five-section boom. This model can be equipped with a 7,9 m - 13,7 m (26 ft - ft) two-section offsettable extension, providg a maximum tip height of 54,6 m (179 ft). 9,7 m - 39,0 m (31.7 ft - 128 ft) five-section full power boom FJM-0S 7,9 m - 13,7 m (26 ft - ft) two-section offsettable and 3 manual extension Note: Maximum tip is measured with outriggers/stabilizers fully extended. Series NBT 5

Specifications NBT Series provisional wch data 1 part le max. pull 2 part le max. pull 3 part le max. pull 4 part le max. pull 5 part le max. pull 6 part le max. pull 7 part le max. pull 8 part le max. pull 9 part le max. pull 10 part le max. pull 11 part le max. pull Standard planetary wch Headache ball 1-sheave 2-sheave 5-sheave Low speed 5103 kg (11,2 lb) 58,2 m/m (191 fpm) 10 206 kg (22,0 lb) 28,9 m/m ( fpm) 15 309 kg (33,7 lb) 19,2 m/m (63 fpm) 20 412 kg (,000 lb) 17,3 m/m (47 fpm) 25 515 kg (56,2 lb) 11,6 m/m (38 fpm) 30 618 kg (67,0 lb) 9,4 m/m (31 fpm) 712 kg (78,7 lb) 8,2 m/m (27 fpm) 824 kg (,000 lb) 7,0 m/m (23 fpm) 926 kg (101,2 lb) 6,4 m/m (21 fpm) 51 030 kg (112,0 lb) 5,8 m/m (19 fpm) 54 431 kg (120,000 lb) 5,3 m/m (17 fpm) High speed 2268 kg (5,000 lb) 116,7 m/m (383 fpm) 36 kg (10,000 lb) 58,2 m/m (191 fps) 64 kg (15,000 lb) 38,7 m/m (127 fpm) 72 kg (20,000 lb) 28,9 m/m ( fpm) 11 3 kg (25,000 lb) 23,2 m/m (76 fpm) 13 8 kg (30,000 lb) 19,2 m/m (63 fpm) 15 876 kg (,000 lb) 16,5 m/m (54 fpm) 18 144 kg (,000 lb) 14,3 m/m (47 fpm) 20 412 kg (,000 lb) 12,8 m/m (42 fpm) 22 6 kg ( lb) 11,6 m/m (38 fpm) 24 948 kg (,000 lb) 10.6 m/m (34 fpm) *Cable supplied is 16 mm (5/8 ) diameter roation resistant IWRC. Average breakg strength 25 583 kg (56,0 lb). All wch pulls and speeds are shown on the fourth layer. Wch le pulls would crease on the first, second, and third layers. Wch le speed would decrease on the first, second, and third layers. Wch le pulls may be limited by the wch capacity or the ANSI 5 to 1 cable safety factor. Wch Fourth layer pull Allowable cable pull Standard planetary and auxiliary planetary 2268 kg (00 lb) high speed 5117 kg (11,2 lb) low speed 5117 kg (11,2 lb) 5117 kg (11,2 lb) Loadle deduct Aux boom nose 36 kg ( lb) 7 USt Downhaul weight 78 kg (171 lb) 20 USt 1-sheave block 181 kg (0 lb) USt 3-sheave block 272 kg (0 lb) USt 5-sheave block 498 kg (1098 lb) 6

Weights Standard NBT Configuration Horizontal CG mm () Weight and CG estimates (see notes) Weight w/fluids kg (lb) CWT pned (# slabs) CWT stowed (# slabs) NBT128 438 (17.2) 23 092 (,9) 2 0 NBT128 847 (33.4) 23 092 (,9) 1 1 NBT128 1266 (49.8) 23 092 (,9) 0 2 NBT128 683 (26.9) 21 724 (47,893) 1 0 NBT128 1128 (44.4) 21 724 (47,893) 0 1 NBT128 1039 (.9) 20 013 (44,121) 0 0 Weight and center of gravity notes: 1. Information provided is for reference only (calculated weights). 2. Weight and CG data is applicable for a standard mache: 128 ft boom 2/3 part le block cluded Ma hoist only (IPO counterweight stalled) Standard deckg with fixed access ladder No boom extension equipped No optional turret access step No aux nose or optional hook blocks 3. All counterweight configurations are shown table: Pned = attached to cylders and turret ( use) Stowed = attached to torsion box (not use) 2 = top & bottom slabs 1 = top or bottom slab only 0 = No slab pned and/or stowed If both stowed and pned columns are 0, the counterweight is physically removed from the mache. IPO is also assumed removed this case. For more formation about mountg configuration options, please contact your local National Crane dealer. Series NBT 7

Mountg configurations Configuration 1 -NBT128 (4-axle Mimum Truck) 9782 mm (31' 11") Retracted 39 014 mm (128' 0") Extended w/out jib 38 mm (146") Tailswg (2) slabs pned 1372 mm (54") 20 mm (13' 2 1/4" ) Overall height 6 mm (14") 1143 mm (") 1194 mm (47") 16 mm (77") 4877 mm (192") 2794 mm (110") 6 mm (16") CLR to CA 6833 mm (269") 11 2 mm (36' 10 1/2") 12 097 mm (39' 8 1/4") Overall length Workg area 36 Gross Axle Weight Ratg, Front 72 kg (20,000 lb) Gross Axle Weight Ratg, Rear 29 937 kg (66,000 lb) Gross Vehicle Weight Ratg 39 009 kg (86,000 lb) Wheelbase (WB) 683 cm (269 ) Cab to Axle/Cab to Trunnion (CA/CT) 488 cm (192 ) Frame Strength Frame Section Modulus (SM); front axle to end of AF Stability Weight, Front Stability Weight, Rear 7 MPa (110,000 PSI) 327 cm3 (20 3) 44 kg ( lb) 56 kg (12,0 lb) *NOTE: Estimated axles scale weights prior to stallation of crane assembly for % stability. Configuration 2 NBT128 (Heavy Lift Truck Tandem/Tridem) Boom extended to 10 147 mm (33' 3 1/2") 9782 mm (31' 11") Retracted 39 014 mm (128' 0") Extended w/out jib 3632 mm (143") Tailswg (2) slabs stowed 1372 mm (54") 20 mm (13' 2 1/4" ) Overall height 1143 mm (") Truck height 864 mm (34") 1194 mm (47") 2108 mm (83") 1829 mm (72") 762 mm (30") 62 mm (256") 5918 mm (233") 7417 mm (292") 11 487 mm (37' 8 1/4") 12 510 mm (41' 0 1/2") Overall length 2794 mm (110") 584 mm (23") CLR to CA 2489 mm (98") Afterframe 8 Workg area 36 Gross Axle Weight Ratg, Front 18 144 kg (,000 lb) Gross Axle Weight Ratg, Rear 29 937 kg (66,000 lb) Gross Vehicle Weight Ratg 48 0 kg (106,000 lb) Wheelbase (WB) 742 cm (292 ) Cab to Axle/Cab to Trunnion (CA/CT) 546 cm (215 ) Frame Strength Frame Section Modulus (SM); front axle to end of AF Stability Weight, Front Stability Weight, Rear 7 MPa (110,000 PSI) 327 cm3 (20 3) 69 kg (15,300 lb) 5125 kg (11,300 lb) *NOTE: Estimated axles scale weights prior to stallation of crane assembly for % stability.

Mountg configurations Configuration 3 NBT128 (7-axle-Federal Bridge Law Compliant) Boom extended to 11 m (') 9782 mm (31' 11") Retracted 39 014 mm (128' 0") Extended w/out jib 38 mm (146") Tailswg 1346 mm (53") (2) Slabs stowed 1372 mm (54") 20 mm (13' 2 1/4" ) Overall height 864 mm (34") 737 mm (29") 2362 mm (93") 13 mm (71") 1092 mm (43") 2896 mm (114") 7442 mm (293") 12 008 mm (39' 4 3/4") 1397 mm (") 6 mm (14") CLR to CA 1397 mm 1346 mm (53") (") 3429 mm (1") MIN Afterframe 1143 mm (") Truck height 13 113 mm (43' 1/4") Overall length Workg area 36 Gross Axle Weight Ratg, Front 72 kg (20,000 lb) Gross Axle Weight Ratg, Rear 29 937 kg (66,000 lb) Gross Vehicle Weight Ratg, Pusher 1 3629 kg (8,000 lb) Gross Vehicle Weight Ratg, Pusher 2 3629 kg (8,000 lb) Gross Vehicle Weight Ratg, Tag 3629 kg (8,000 lb) Wheelbase (WB) 744 cm (293 ) Cab to Axle/Cab to Trunnion (CA/CT) Frame Strength Frame Section Modulus (SM); front axle to end of AF Stability Weight, Front Stability Weight, Rear 8 cm (200 ) 7 MPa (110,000 PSI): 327 cm3 (20 3) 5341 kg (11,7 lb)* 31 kg (13,2 lb)* *NOTE: Estimated axles scale weights prior to stallation of crane assembly for % stability. Series NBT 9

Dimensions 17 mm (") AUX HOIST (OPTIONAL) 2946 mm (116") 1276 mm (") ROTATION 649 mm (26") 764 mm (30") FRONT LIFTING LUGS 2 mm (18") S/S HYD RESERVOIR 7,9 m - 13,7 m (26'-') TWO SECTION BOOM EXTENSION TABLE AT and 3 (OPTIONAL) REAR LIFTING LUGS BOLTED STRUCTURAL BUMPER ATTACHED TO TRUCK FRAME m ) WIDTH 2126 mm (84") AUX HOIST 1542 mm (61") MAIN HOIST 9730 mm (383") RETRACTED 38 966 mm (1534") EXTENDED (SINGLE PART ROPEFALL) 17 mm (") AUX HOIST (OPTIONAL) 71 mm (141") 1942 mm (76") CHASSIS CAB CLEARANCE STANDARD CAB A/C 649 mm (26") 764 mm (30") CLAMPED STUD CONNECTION (FRONT ONLY) REAR WELDED/BOLTED LIFTING SHEAR PLATE LUGS CONNECTION 4314 mm (1") 7258 mm (286") 2591 mm (102") OVERALL WIDTH AUX HOIST (OPTIONAL) 17 mm (") S/S HYD RESERVOIR 637 mm (25") 2 mm (18") 3X WELDED/BOLTED FLEX PLATE CONNECTION 3301 mm (130") ROTATION BOLTED STRUCTURAL BUMPER ATTACHED TO TRUCK FRAME 296 mm (12") 2946 mm (116") 9730 mm (383") RETRACTED 38 966 mm (1534") EXTENDED (SINGLE PART ROPE 649 mm (26") 764 mm (30") 31 mm (144") S/S HYD RESERVOIR 1276 mm (") ROTATION 71 mm (141") 2946 mm (116") 1276 mm (") ROTATION FRONT LIFTING LUGS 2 mm (18") 1942 mm (76") CHASSIS CAB CLEARANCE 7,9 m - 13,7 m (26'TWO SECTION BO TABLE AT (OPTIONAL) REAR LIFTING LUGS BOLTED STRUCTURAL BUMPER ATTACHED TO TRUCK FRAME 0 mm (") MAX CHASSIS WIDTH 2591 mm (102") OVERALL WIDTH CLAMPED STUD CONNECTION (FRONT ONLY) 4314 mm (1") 9730 mm (383") RETRACTED 38 966 mm (1534") EXTENDED (SINGLE PART ROPEFALL) 1542 MA 1942 mm (76") STA 10 71 mm (141")

Dimensions 3301 mm (130") RET/MID/EXT 4813 mm (189") EXTENDED 43 mm (173") MID-SPAN 7388 mm (291") EXT 4886 mm (192") MID 2384 mm (94") RET 37 mm (156") RETRACTED 2387 mm (94") RET 4738 mm (187") MID 89 mm (279") EXT HORIZ CG SEE TABLE Series NBT 11

Workg range NBT: 39,0 m (128 ft boom) with 7,9 m - 13,7 m (26 ft - ft) extension (heavy lift) (Boom deflection not shown) 1 1 1 1 3 Offset Offset ' Ext. 26' Ext. 1 Height from ground 1 130 120 110 3 2 4 5 6 7 128 118 107 97 86 64 54 43 32 Boom length and extension 30 20 10 1 8 Max boom angle 0 1 1 120 20 1 1 130 110 30 10 Axis of rotation Operatg radius from axis of rotation (6' 9") (8' 7") Dimensions are for largest furnished hook block and headache ball with anti-two block activated. *This drawg shows the physical reach of the mache. Always refer to the load chart to see which portions of this diagram are valid for the specific mache configuration and where the loads are structurally or stability limited. 12

NBT: 39,01 m (128 ft) boom, 2722 kg (00 lb) countwerweight, 36, outriggers % extended, (heavy lift) 8 10 12 15 20 25 30 105 110 115 120 #0001 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64.0) 82,8 69,7 53,1 (.3) 36,0 (21.8) (68.5) (64.1) (56.2) 43,0 (47.6),0 (37.4) 26,0 (23.6) (73.3) (.0) 47,9 (64.2) 43,0 (58.0) 36,0 (51.3) 29,0 (43.9) 23,300 (.3) 18,0 (24.0) 49,5 46,0 41,0 (68.8) 37,1 33,0 (58.7) 30, (53.2) 23,6 (47.1) 19,1 (.3) 15,0 (32.5) 13,2 (22.2) 39,300 34, (72.5) 30, 27, (64.2) 24,0 22,7 (.2) 19,0 (.2) 16, (44.7) 13,0 (38.7) 11,0 (31.7) 90 (23.9) *71 (9.4) 27,200 (78.3) 25,200 (.0) 22,6 (71.6) 20,0 (68.0) 18,0 (64.3) 17,0 15,0 (56.5) 14,0 (52.4) 13,6 (47.9) 11,6 (43.0) 10, (38.1) (31.9) (24.4) (13.0) 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 16,300 (68.0) 15, (64.8) 14,000 (61.5) 12,8 (58.0) 12,000 (54.4) 11,2 (.9) 10,300 (46.8) 80 (42.3) 70 (37.4) 60 (31.7) 50 (25.0) (15.5) Mimum boom angle ( ) for dicated length Maximum boom length (ft.) at boom angle NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 16,0 (76.2) 15,7 14,0 13,6 (68.0) 12,5 (.0) 11,7 (62.0) 10,9 (59.2) 10,300 (56.0) (52.6) (49.0) 78 (.0) 60 (.7) 59 (36.0) (30.7) 00 (24.2) 30 (15.2) 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 17,9 (27.5) 10,000 (38.8) 68 (49.8) 6 42 28 (81.8) 17 (92.8) 0 (102.8) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.9) 10,000 (63.2) (.4) 88 (57.5) (54.5) 79 (51.3) 69 (47.8) (44.1) 5300 (.1) 40 (.7) 00 (30.8) 00 (24.9) (17.0) 3 107 (74.9) (72.8) (.6) 87 (66.0) 78 (63.4) 00 (.7) 6300 (57.9) 50 (.1) 51 (52.1) 46 (49.0) 41 (.7) (42.2) 3300 (38.4) (34.3) 26 (29.6) 10 (23.8) 1 (15.9) 1 1 NOTE: ( ) Reference radii. 059325 Series NBT 13

NBT: 39,01 m (128 ft) boom, 2722 kg (00 lb) countwerweight, over rear, outriggers % extended, (heavy lift) 8 10 12 15 20 25 30 105 110 115 120 #0003 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64.0) 82,8 69,7 53,1 (.3) 36,0 (21.8) (68.5) (64.1) (56.2) 43,0 (47.6),0 (37.4) 26,0 (23.6) (73.3) (.0) 47,9 (64.2) 43,0 (58.0) 36,0 (51.3) 30,9 (43.9) 25,0 (.3) 19,9 (24.1) 49,5 46,0 41,0 (68.8) 37,1 33,0 (58.7) 30,0 (53.2) 26,0 (47.1) 22,5 (.4) 18,9 (32.6) *15, (22.3) 39,300 34, (72.5) 30, 27, (64.2) 24,0 22,7 (.2) 21,200 (.3) 19,2 (44.9) 16,0 (38.9) 14, (31.9) *12,200 (24.0) *71 (9.4) 27,200 (78.3) 25,200 (.0) 22,6 (71.6) 20,0 (68.0) 18,0 (64.3) 17,0 15,0 (56.5) 14,0 (52.4) 13,6 (47.9) 12,7 (43.1) 12,000 (37.7) 11,000 (32.2) 96 (24.6) *60 (13.1) 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 16,300 (68.0) 15, (64.8) 14,000 (61.5) 12,8 (58.0) 12,000 (54.4) 11,2 (.9) 10,0 (46.8) 10,0 (42.5) (37.6) (32.1) 70 (25.3) *59 (15.6) Mimum boom angle ( ) for dicated length Maximum boom length (ft.) at boom angle NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 16,0 (76.2) 15,7 14,0 13,6 (68.0) 12,5 (.0) 11,7 (62.0) 10,9 (59.2) 10,300 (56.0) (52.6) 9200 (49.0) (.2) 8300 (41.0) 78 (36.5) 69 (31.1) 6200 (24.7) *47 (15.4) 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 17,9 (27.5) 10,000 (38.8) 68 (49.8) 6 42 28 (81.8) 17 (92.8) 0 (102.8) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.9) 10,000 (63.2) (.4) 88 (57.5) (54.5) 79 (51.3) (48.0) 72 (44.5) 69 (.5) 6300 (36.3) 56 (31.4) 00 (25.5) *4200 (17.3) 3 107 (74.9) (72.8) (.6) 87 (66.0) 78 (63.4) 00 (.7) 6300 (57.9) 50 (.1) 51 (52.1) 46 (49.0) 41 (.7) (42.2) 3300 (38.4) (34.3) 26 (29.6) 10 (23.8) 1 (15.9) 1 1 NOTE: ( ) Reference radii. 059329 14

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 2722 kg (00 lb) counterweight, 36, outriggers % extended, (heavy lift) 105 110 115 120 125 130 1 1 1 1 **26 ft LENGTH ft LENGTH #0005 #0007 #0009 #0011 (.3) (71.9) (.1) (66.7) 48 (64.7) 00 (62.6) 42 39 (58.3) 30 (56.1) 36 (53.8) 31 (51.2) 20 (48.4) 2 (.5) 10 (42.5) 10 (39.3) 9 (.8) 6 (32.1) 3 (77.4) (.6) (73.7) 46 (69.7) 40 (67.5) 41 (.2) 00 (62.9) 30 36 (58.1) 30 (.4) 20 (52.5) 25 (49.5) 21 (46.3) 16 (42.7) 1200 (38.9) 8 (34.8) 0 (30) (77.3) (.8) (74.4) (72.9) (69.9) (66.9) (.4) (61.9) 32 (59.9) (57.8) 20 (.6) (53.5) 2,300 (51.2) 20 (48.7) 17 (46.0) 10 (43.3) 1200 (.4) 0 (37.2) 6 (33.9) 3 (77.0) (.2) (69.8) (67.9) (.9) 20 (61.7) 20 (59.5) 20 (57.1) 2300 (54.7) 22 (52.1) 2000 (49.1) 17 (.9) 10 (42.3) 0 (38.2) 0 (33.9) M. boom angle for dicated length 29 3 3 31 Max. boom length at boom angle 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 059337 #LMI operatg code. Refer to LMI manual for structions. *Loads are structurally limited. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations. 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only. Series NBT 15

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 2722 kg (00 lb) counterweight, over rear, outriggers % extended, (heavy lift) 105 110 115 120 125 130 1 1 1 1 M. boom angle for dicated length Max. boom length at boom angle **26 ft LENGTH ft LENGTH #0006 #0008 #0010 #0012 (.3) (71.9) (.1) (66.7) 48 (64.7) 00 (62.6) 42 39 (58.3) 30 (56.1) 3,6 (53.8) 31 (51.2) 20 (48.4) 2 (.5) 10 (42.5) 10 (39.3) 9 (.8) 6 (32.1) 3 (77.4) (.6) (73.7) 46 (69.7) 40 (67.5) 41 (.2) 00 (62.9) 30 36 (58.1) 30 (.4) 20 (52.5) 25 (49.5) 21 (46.3) 16 (42.7) 1200 (38.9) 8 (34.8) 0 (30) (77.3) (.8) (74.4) (72.9) (69.9) (66.9) (.4) (61.9) 32 (59.9) (57.8) 20 (.6) (53.5) 2300 (51.2) 20 (48.7) 17 (46.0) 10 (43.3) 1200 (.4) 0 (37.2) 6 (33.9) 3 (77.0) (.2) (69.8) (67.9) (.9) 20 (61.7) 2,0 (59.5) 20 (57.1) 2300 (54.7) 22 (52.1) 2000 (49.1) 17 (.9) 10 (42.3) 0 (38.2) 0 (33.9) 29 3 3 31 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 059338 #LMI operatg code. Refer to LMI manual for structions. *Loads are structurally limited. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations. 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only. 16

NBT: 39,01 m (128 ft) boom, 2722 kg (00 lb) counterweight, 36, outriggers % extended, (heavy lift) 8 10 12 15 20 25 30 #01 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64.0) 82,8 69,7 38,200 (.2) 24,0 (21.8) (68.5) (64.1) 39,0 (56.2) 25,0 (47.5) 18,0 (37.3) 13,7 (23.6) (73.3) (.0),000 (64.1) 26,0 (57.8) 19,000 (51.1) 14,300 (43.7) 11,0 (36.0) 86 (25.2) 49,5 46,0,0 (68.8) 26,7 (63.7) 19,300 (58.4) 14,0 (52.8) 11,0 (46.7) 89 (.7) 7200 (33.0) 57 (23.2) 39,300 34, (72.5) 27, (68.3) 19,0 14,8 (59.4) 11,0 (54.6) 91 (.1) (44.8) 00 (38.9) (32.1) 38 (23.6) (9.2) 27,200 (78.3) 25,200 (.0) 22,6 (71.6) 19,8 (67.9) 15, (64.1) 11,7 (.2) (56.5) 76 (52.2) 61 (47.7) 00 (42.9) 00 (37.5) 3200 (31.4) (23.9) 18 (12.6) 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 15,0 (67.9) 12,000 (64.5) (61.3) 70 (57.7) 6300 (54.0) 51 (.1) 41 (.9) 3300 (41.4) 20 (36.5) 2000 (30.9) 10 (24.2) 0 (14.8) 16,0 (76.2) 15,7 14,0 12,200 (67.8) (64.9) 79 (61.7) (58.4) 52 (.0) 42 (51.5) 30 (47.8) 20 (43.8) 2 (39.6) 10 (34.9) 1 (29.6) 0 (23.3) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 12,0 90 (68.2) 8 (.3) 60 (62.4) (59.4) 40 (56.3) 20 (49.8) 2200 (46.3) 16 (42.7) 1200 (38.7) 0 (34.4) (74.9) (72.8) (.6) 8300 (68.1) 67 (.4) 50 (62.6) 00 (59.9) 36 (57.0) 20 (54.1) 2300 (51.0) 17 (47.9) 12 (44.5) 8 (41.0) Mimum boom angle ( ) for dicated length 17 30 37 Maximum boom length (ft) at boom angle 97 NOTE: ( ) Boom angles are degrees. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 31.7 43-A 54-B 64-C -D 86-E 97-F 17,9 (27.5) 10,000 (38.8) 68 (49.8) 40 28 16 (81.8) 7 (92.8) NOTE: ( ) Reference radii. 059331 Series NBT 17

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 2722 kg (00 lb) countwerweight, 36, outriggers % extended, (heavy lift) 105 110 115 **26 ft LENGTH ft LENGTH #05 #07 #09 #0411 (.3) (71.9) (.1) 4300 (66.1) 30 26 (61.5) 2000 (59.1) 10 (56.7) 9 (54.2) 5 (51.7) 3 (77.4) (.6) (73.7) (69.5) 30 (66.8) 20 (64.2) 21 (61.5) 15 (58.8) 10 (56.1) 0 (53.2) (77.3) (.8) (74.4) (72.9) (69.9) (66.9) 30 (64.5) 20 (62.3) 18 (.1) 10 (57.8) 9 (.5) 0 (53.2) 3 (77.0) (.2) (69.8) (67.9) 20 (.7) 10 (63.1) 10 (.4) 0 (57.8) 0 (.1) M. boom angle for dicated length 51 53 53 Max. boom length at boom angle 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 059339 #LMI operatg code. Refer to LMI manual for structions. *Loads are structurally limited. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations. 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only. 18

NBT: 39,01 m (128 ft) boom, 2722 kg (00 lb) counterweight, 36, outriggers 0% extended, (heavy lift) 8 10 12 15 20 25 30 #01 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128,0 (68.1) 48,300 (64.0) 34,0 23,300 13,7 (.2) 86 (24.2) 49,5,6 24,2 (64.0) 14,0 (56.1) (48.3) (38.3) 40 (25.2) 36,2 (73.2) 24,7 (69.8) 15, 10,000 (58.3) 69 (51.6) (44.3) 3200 (.9) 2000 (25.1) 36,7 (76.2) 25,1 (73.3) 15,0 10,2 72 (58.6) 00 (47.2) 2300 (.5) 10 (32.9) 5 (23.0) 25,0 (76.1) 15,6 (71.9) 10,0 (68.1) 52 (59.4) 36 (54.8) 20 (49.8) 15 (44.5) 0 (38.6) 25,8 (78.3) 15,0 (74.6) 10,6 (71.3) (67.6) 30 (.0) 20 (56.0) 16 (51.8) 0 (47.3) 16,200 10,8 (73.9) 70 (.7) (67.4) 39 (64.0) 27 (.6) 10 (57.0) 0 (53.3) 11, (.9) 79 (72.9) 50 (69.9) (66.9) 28 18 (.7) 1 (57.5) 11,300 (77.5) 8 (.0) 58 (72.3) 4200 (69.6) 29 (66.8) 19 (64.0) 1200 (61.1) 5 (58.2) Mimum boom angle ( ) for dicated length 20 44 54 58 61 Maximum boom length (ft) at boom angle 54 NOTE: ( ) Boom angles are degrees. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 31.7 43-A 54-B 7300 (27.5) (38.8) 10 (49.8) 8300 (76.7) 59 (74.1) 4300 (71.6) (69.0) 20 (66.5) 12 0 (61.2) NOTE: ( ) Reference radii. 0593 Series NBT 19

NBT: 39,01 m (128 ft) boom, 1361 kg ( lb) counterweight, 36, outriggers % extended, (heavy lift) 8 10 12 15 20 25 30 105 110 115 120 #1 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64.0) 82,8 69,7 53,1 (.3) 36,0 (21.8) (68.5) (64.1) (56.2) 43,0 (47.6),0 (37.4) 26,0 (23.6) (73.3) (.0) 47,9 (64.2) 43,0 (58.0) 36,0 (51.3) 27,300 (43.9) 21,0 (.2) 17,1 (24.0) 49,5 46,0 41,0 (68.8) 37,1 33,0 (58.7) 27,0 21,0 (47.0) 17,0 (.3) 14,0 (32.4) 11,9 (22.2) 39,300 34, (72.5) 30, 27, (64.2) 24,0 22,000 (.1) 17,7 (.1) 14,6 (44.6) 12,200 (38.6) 10,0 (32.4) 88 (23.9) *71 (9.4) 27,200 (78.3) 25,200 (.0) 22,6 (71.6) 20,0 (68.0) 18,0 (64.3) 17,0 15,0 (56.5) 14,0 (52.4) 12,0 (47.8) 10,0 (43.4) (38.0) 77 (31.8) 66 (24.3) 50 (13.0) Mimum boom angle ( ) for dicated length Maximum boom length (ft) at boom angle NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. Boom angle 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 16,300 (68.0) 15, (64.8) 14,000 (61.5) 12,8 (58.0) 12,000 (54.4) 10,0 (.8) 92 (46.6) 70 (42.1) 60 (37.2) 50 (31.6) (24.9) 40 (15.4) Liftg capacities at zero degree boom angle 16,0 (76.2) 15,7 14,0 13,6 (68.0) 12,5 (.0) 11,7 (62.0) 10,9 (59.2) 10,300 (56.0) (52.5) (48.8) 69 (44.8) 00 (.5) (.8) 40 (30.5) 38 (24.1) 32 (15.0) 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 17,9 (27.5) 10,000 (38.8) 68 (49.8) 6 42 28 (81.8) 17 (92.8) 0 (102.8) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.9) 10,000 (63.2) (.4) 88 (57.5) 8200 (54.4) 7 (51.1) 61 (47.6) 5300 (43.8) 40 (39.9) 39 (.5) 30 (30.6) 20 (24.7) 20 (16.8) 3 107 (74.9) (72.8) (.6) 87 (66.0) 78 (63.4) 00 (.7) 6300 (57.9) 50 (.1) 51 (52.1) 46 (49.0) 41 (.7) (42.2) 3300 (38.4) 29 (34.3) (29.5) *10 (23.8) *1 (15.9) NOTE: ( ) Reference radii. 0593 1 1 20

NBT: 39,01 m (128 ft) boom, 1361 kg ( lb) counterweight, over rear, outriggers % extended, (heavy lift) 8 10 12 15 20 25 30 105 110 115 120 #3 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64.0) 82,8 69,7 53,1 (.3) 36,0 (21.8) (68.5) (64.1) (56.2) 43,0 (47.6),0 (37.4) 26,0 (23.6) (73.3) (.0) 47,9 (64.2) 43,0 (58.0) 36,0 (51.3) 30,9 (43.9) 25,1 (.3) *19,9 (24.1) 49,5 46,0 41,0 (68.8) 37,1 33,0 (58.7) 30,0 (53.2) 25,0 (47.1) 20,9 (.4) 17,5 (32.5) 14,8 (22.3) 39,300 34, (72.5) 30, 27, (64.2) 24,0 22,7 (.2) 21,200 (.3) 17,0 (44.8) 15, (38.8) 13,000 (31.8) 11,200 (24.0) *71 (9.4) 27,200 (78.3) 25,200 (.0) 22,6 (71.6) 20,0 (68.0) 18,0 (64.3) 17,0 15,0 (56.5) 14,0 (52.4) 13,6 (47.9) 12,7 (43.1) 11,0 (37.7) 10,0 (32.1) 80 (24.5) *60 (13.1) 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 16,300 (68.0) 15, (64.8) 14,000 (61.5) 12,8 (58.0) 12,000 (54.4) 11,2 (.9) 10,0 (46.8) 10,0 (42.5) 89 (37.6) 70 (31.9) 69 (25.2) *59 (15.6) Mimum boom angle ( ) for dicated length Maximum boom length (ft ) at boom angle NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 16,0 (76.2) 15,7 14,0 13,6 (68.0) 12,5 (.0) 11,7 (62.0) 10,9 (59.2) 10,300 (56.0) (52.6) 9200 (49.0) (.2) 00 (41.0) 7 (36.3) 62 (30.9) (24.5) *47 (15.4) 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 17,9 (27.5) 10,000 (38.8) 68 (49.8) 6 42 28 (81.8) 17 (92.8) 0 (102.8) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.9) 10,000 (63.2) (.4) 88 (57.5) (54.5) 79 (51.3) (48.0) 7200 (44.5) (.5) 56 (36.1) 00 (31.1) 40 (25.2) 30 (17.3) 3 107 (74.9) (72.8) (.6) 87 (66.0) 78 (63.4) 00 (.7) 6300 (57.9) 50 (.1) 51 (52.1) 46 (49.0) 41 (.7) (42.2) 3300 (38.4) (34.3) 26 (29.6) 10 (23.8) 1 (15.9) 1 1 NOTE: ( ) Reference radii. 059344 Series NBT 21

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 1361 kg ( lb) counterweight, 36, outriggers % extended, (heavy lift) 105 110 115 120 125 130 1 1 1 1 **26 ft LENGTH ft LENGTH #5 #7 #9 #1011 (.3) (71.9) (.1) (66.7) 48 (64.7) 00 (62.6) 42 39 (58.3) 30 (56.1) 36 (53.8) 31 (51.2) 20 (48.4) 2 (.5) 10 (42.5) 10 (39.3) 9 (.8) 6 (32.1) 3 (77.4) (.6) (73.7) 46 (69.7) 40 (67.5) 41 (.2) 00 (62.9) 30 36 (58.1) 30 (.4) 20 (52.5) 25 (49.5) 21 (46.3) 16 (42.7) 1200 (38.9) 8 (34.8) 0 (30) (77.3) (.8) (74.4) (72.9) (69.9) (66.9) (.4) (61.9) 32 (59.9) (57.8) 20 (.6) (53.5) 2300 (51.2) 20 (48.7) 17 (46.0) 10 (43.3) 1200 (.4) 0 (37.2) 6 (33.9) 3 (77.0) (.2) (69.8) (67.9) (.9) 20 (61.7) 20 (59.5) 20 (57.1) 2300 (54.7) 22 (52.1) 2000 (49.1) 10 (.6) *10 (42.3) *0 (38.2) *0 (33.9) M. boom angle for dicated length 29 3 3 31 Max. boom length at boom angle 64 ft 64 ft NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. 0592 #LMI operatg code. Refer to LMI manual for structions. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations. 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only. 22

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 1361 kg ( lb) counterweight, over rear, outriggers % extended, (heavy lift) 105 110 115 120 125 130 1 1 1 1 **26 ft LENGTH ft LENGTH #6 #8 #1010 #1012 (.3) (71.9) (.1) (66.7) 48 (64.7) 00 (62.6) 42 39 (58.3) 30 (56.1) 36 (53.8) 31 (51.2) 20 (48.4) 2 (.5) 10 (42.5) 10 (39.3) 9 (.8) 6 (32.1) 3 (77.4) (.6) (73.7) 46 (69.7) 40 (67.5) 41 (.2) 00 (62.9) 30 36 (58.1) 30 (.4) 20 (52.5) 25 (49.5) 21 (46.3) 16 (42.7) 1200 (38.9) 8 (34.8) 0 (30) (77.3) (.8) (74.4) (72.9) (69.9) (66.9) (.4) (61.9) 32 (59.9) (57.8) 20 (.6) (53.5) 2300 (51.2) 20 (48.7) 17 (46.0) 10 (43.3) 1200 (.4) 0 (37.2) 6 (33.9) 3 (77.0) (.2) (69.8) (67.9) (.9) 20 (61.7) 20 (59.5) 20 (57.1) 2300 (54.7) 22 (52.1) 2000 (49.1) 17 (.9) 10 (42.3) 0 (38.2) 0 (33.9) M. boom angle for dicated length 29 3 3 31 Max. boom length at boom angle 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 0593 #LMI operatg code. Refer to LMI manual for structions. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only. Series NBT 23

NBT: 39,01 m (128 ft) boom, 1361 kg ( lb) counterweight, 36, outriggers % extended, (heavy lift) 8 10 12 15 20 25 30 #11 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64.0) 82,8 64,200 34,6 (.2) 22,2 (21.8) (68.5) (64.1),7 (56.2) 23,0 (47.5) 16,5 (37.3) 12,1 (23.6) (73.3) (.0) 36,0 (64.1) 23,0 (57.8) 17,0 (51.1) 12,0 (43.7) (36.0) (25.2) 49,5 46,0 36,8 (68.8) 24,300 (63.6) 17,0 (58.3) 13,000 (52.7) 10,000 (47.3) 70 (.7) 6200 (33.0) 48 (23.2) 39,300 34, (72.5) 24,6 (68.2) 17,0 13,2 (59.3) 10,200 (.0) 81 (.1) (44.8) 5 (38.8) 00 (32.0) 3 (23.5) 2300 (9.1) 27,200 (78.3) 25,200 (.0) 22,6 (71.6) 17,8 (67.8) 13,0 (64.0) 10,0 (.4) 8300 (56.4) 60 (52.1) 52 (47.6) 41 (42.8) 32 (37.4) (31.3) 18 (23.8) 12 (12.5) 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 13,0 (67.8) 10,0 (64.7) (61.2) 67 (57.6) (53.9) 4300 (49.9) 30 (.8) 20 (41.3) 19 (36.4) 10 (30.8) 0 (24.1) 0 (14.7) 16,0 (76.2) 15,7 13,9 (.7) 10,0 (67.8) (64.7) 60 (61.5) 50 (58.2) 40 (54.8) 00 (51.3) 20 (47.6) 20 (43.7) 10 (39.5) 0 (34.8) 0 (29.5) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 11,000 86 (67.9) (.1) 56 (62.1) (59.2) 30 (56.1) 20 (52.9) 21 (49.6) 10 (46.2) 1 (42.5) 6 (38.5) (74.9) (72.8) 88 (.4) 7200 (67.8) 50 (.1) 46 (62.4) (59.6) 20 (56.7) 22 (53.8) 16 (.8) 11 (47.6) 0 (44.3) Mimum boom angle ( ) for dicated length 14 28 37 42 Maximum boom length (ft) at boom angle 86 NOTE: ( ) Boom angles are degrees. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 31.7 43-A 54-B 64-C -D 86-E 17,9 (27.5) 99 (38.8) 58 (49.8) 37 2200 10 (81.8) NOTE: ( ) Reference radii. 059346 24

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 1361 kg ( lb) countwerweight, 36, outriggers % extended, (heavy lift) 25 30 105 110 **26 ft LENGTH ft LENGTH #15 #17 #19 #1411 (77.1) (.5) (73.8) (72.2) (.5) 40 (68.0) 00 (.8) 26 (63.5) 19 (61.1) 10 (58.8) 8 (56.3) 3 (77.4) (.6) (73.7) 47 (71.6) 37 (69.0) 28 (66.3) 21 (63.7) 10 (61.1) 0 (58.4) 0 (.7) (77.3) (.8) (74.4) (72.9) (69.9) (66.1) 2300 10 (61.7) 12 (59.6) 0 (57.3) 0 (.1) 3 (77.0) (.2) (69.8) 20 (67.7) 18 (.1) 10 (62.5) 0 (59.9) 0 (57.3) M. boom angle for dicated length 56 57 Max. boom length at boom angle 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 0594 #LMI operatg code. Refer to LMI manual for structions. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations. 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only Series NBT 25

NBT: 39,01 m (128 ft) boom, 1361 kg ( lb) counterweight, 36, outriggers 0% extended, (heavy lift) 8 10 12 15 20 25 30 #11 Ma noom length 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 66,0 (68.0) 42,0 (64.0) 30,200 20,0 11,0 (.2) 71 (24.2) 43,0 (71.3) 31,2 21,000 (64.0) 12,0 (56.1) 00 (48.3) 51 (38.3) 3200 (25.2) 31,8 (73.2) 21,5 (69.7) 12,8 (58.2) 50 (51.6) 36 (44.3) 22 (.9) 11 (25.1) 32,300 (76.1) 21,0 (73.2) 13,1 (68.3) 58 (58.6) 30 (47.1) 10 (.5) 5 (32.8) 22,200 (76.0) 13,0 (71.9) 87 (68.1) 4 (59.4) 26 (54.7) 10 (49.8) 7 (44.5) 22,5 (78.2) 13,6 (74.5) 89 (71.2) 6200 (67.6) 42 20 (59.9) 17 (.9) 0 (51.7) 13,0 (76.7) 9 (73.8) (.5) 40 (67.3) 29 18 0 (56.9) 9300 (.7) (72.8) 00 (69.8) 30 (66.8) 19 (63.7) 1 (.6) (77.5) 60 (74.8) 40 (72.1) 31 (69.4) 20 (66.6) 11 Mimum boom angle ( ) for 11 32 42 49 54 58 61 63 dicated length Maximum boom length (ft) at 43 boom angle NOTE: ( ) Boom angles are degrees. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 31.7 43-A 57 (27.5) 19 (38.8) 60 47 (73.9) 32 2 (68.8) 1200 (66.3) 0 (63.6) NOTE: ( ) Reference radii. 05 26

NBT: 39,01 m (128 ft) boom, 0 kg (0 lb) counterweight, 36, outriggers % extended, (heavy lift) 8 #01 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 10 12 15 20 25 30 105 110 115 120 94,1 (64.0) 82,8 69,7 53,1 (.3) 36,0 (21.8) (68.5) (64.1) (56.2) 43,0 (47.6) 31,0 (37.3) 23,0 (23.6) (73.3) (.0) 47,9 (64.2) 43,0 (58.0) 32,0 (51.3) 24,1 (43.8) 18,0 (.2) 14,0 (24.0) 49,5 46,0 41,0 (68.8) 37,1 33,000 (58.7) 24,0 (53.0) 19, (47.0) 15,2 (.2) 12,0 (32.4) 10,0 (23.3) 39,300 34, (72.5) 30, 27, (64.2) 24,0 19,0 (.0) 15,5 (.0) 12,0 (44.5) 10,6 (39.2) 80 (32.3) (23.8) 62 (9.3) 27,200 (78.3) 25,200 (.0) 22,6 (71.6) 20,0 (68.0) 18,0 (64.3) 17,0 15,7 (56.5) 12,0 (52.2) 10,8 (48.1) 9 (43.2) 76 (37.9) (31.7) 50 (24.2) 40 (12.9) 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 16,300 (68.0) 15, (64.8) 14,000 (61.5) 12,8 (58.0) 11,000 (54.6) 92 (.6) 70 (46.4) 66 (41.9) 56 (37.0) (31.4) (24.7) 30 (15.2) Mimum boom angle ( ) for dicated length Maximum boom length (ft) at boom angle NOTE: ( ) Boom angles are degrees. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 16,0 (76.2) 15,7 14,0 13,6 (68.0) 12,5 (.0) 11,7 (62.0) 10,9 (59.2) (.8) 79 (52.2) 67 (48.5) 57 (44.5) 40 (.3) 41 (.6) 00 (30.3) 29 (23.8) 20 (14.8) 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 17,9 (27.5) 10,000 (38.8) 6,8 (49.8) 6, 4,2 2,8 (81.8) 1,7 (92.8) 0 (102.8) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.9) 10,000 (63.2) (.4) 8 (57.3) 60 (54.1) 50 (.7) 00 (47.2) 42 (43.5) 30 (39.5) 30 (.2) (30.2) 20 (24.4) 10 (16.5) 3 107 (74.9) (72.8) (.6) 87 (66.0) 78 (63.4) 00 (.7) 6300 (57.9) 50 (.1) 5 (52.1) 40 (48.9) (.5) 31 (42.0) 20 (38.1) 21 (33.9) 10 (29.2) 1300 (23.5) 9 (15.8) 1 1 NOTE: ( ) Reference radii. 05 Series NBT 27

NBT: 39,01 m (128 ft) boom, 0 kg (0 lb) counterweight,over rear, outriggers % extended, (heavy lift) 8 10 12 15 20 25 30 105 110 115 120 #03 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64.0) 82,8 69,7 53,1 (.3) 36,0 (21.8) (68.5) (64.1) (56.2) 43,0 (47.6),0 (37.4) 26,0 (23.6) (73.3) (.0) 47,9 (64.2) 43,0 (58.0) 36,0 (51.3) 28,0 (43.9) 22,8 (.3) 18,6 (24.0) 49,5 46,0 41,0 (68.8) 37,1 33,0 (58.7) 29,1 (53.2) 23,200 (47.1) 19,000 (.3) 15,0 (32.5) 13,300 (22.2) 39,300 34, (72.5) 30, 27, (64.2) 24,0 22,7 (.2) 19,2 (.2) 16,0 (44.7) 13,0 (38.7) 11,0 (31.7) 10,0 (23.9) *71 (9.4) 27,200 (78.3) 25,200 (.0) 22,6 (71.6) 20,0 (68.0) 18,0 (64.3) 17,0 15,0 (56.5) 14,0 (52.4) 13,6 (47.9) 11,0 (43.0) 10,2 (38.1) 80 (32.0) 77 (24.4) *60 (13.1) 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 16,300 (68.0) 15, (64.8) 14,000 (61.5) 12,8 (58.0) 12,000 (54.4) 11,2 (.9) 10,0 (46.8) (42.3) 70 (37.4) 60 (31.8) (25.0) 52 (15.5) Mimum boom angle ( ) for dicated length Maximum boom length (ft) at boom angle NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 16,0 (76.2) 15,7 14,0 13,6 (68.0) 12,5 (.0) 11,7 (62.0) 10,9 (59.2) 10,300 (56.0) (52.6) 9200 (49.0) (.0) 00 (.8) 61 (36.1) (30.7) 40 (24.3) 4 (15.2) 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 17,9 (27.5) 10,000 (38.8) NOTE: ( ) Reference radii. 68 (49.8) 6 42 28 (81.8) 17 (92.8) 0 (102.8) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.9) 10,000 (63.2) (.4) 88 (57.5) (54.5) 79 (51.3) 71 (47.9) 62 (44.2) 50 (.2) 48 (.8) 4200 (30.8) (25.0) 3200 (17.1) 3 107 (74.9) (72.8) (.6) 87 (66.0) 78 (63.4) 00 (.7) 6300 (57.9) 50 (.1) 51 (52.1) 46 (49.0) 41 (.7) (42.2) 3300 (38.4) (34.3) 26 (29.6) 10 (23.8) 1 (15.9) 1 1 0599 28

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 0 kg (0 lb) countwerweight, 36, outriggers % extended, (heavy lift) 105 110 115 120 125 130 1 1 M. boom angle for dicated length Max. boom length at boom angle **26 ft LENGTH ft LENGTH #05 #07 #09 #11 (.3) (71.9) (.1) (66.7) 48 (64.7) 00 (62.6) 42 39 (58.3) (.8) 29 (53.2) 2,0 (.5) 19 (47.8) 10 (44.9) 11 (41.8) 7 (38.6) 0 (.1) 3 (77.4) (.6) (73.7) 46 (69.7) 40 (67.5) 41 (.2) 00 (62.9) 3,0 (57.8) 29 (54.9) 20 (51.9) 10 (48.8) 10 (.5) 10 (42.0) 6 (38.2) (77.3) (.8) (74.4) (72.9) (69.9) (66.9) (.4) (61.9) 32 (59.9) (57.8) 20 (.6) 20 19 (.4) 10 (47.9) 12 (.2) 9 (42.4) 6 (39.5) 3 (77.0) (.2) (69.8) (67.9) (.9) 20 (61.7) 20 (59.5) 20 (57.1) 2200 (54.4) 10 (51.4) 10 (48.2) 10 (44.9) 0 (41.3) 36 37 38 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 059367 #LMI operatg code. Refer to LMI manual for structions. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations. 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only. Series NBT 29

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 0 kg (0 lb) countwerweight, over rear, outriggers % extended, (heavy lift) 105 110 115 120 125 130 1 1 1 1 **26 ft LENGTH ft LENGTH #06 #08 #10 #12 (.3) (71.9) (.1) (66.7) 48 (64.7) 00 (62.6) 42 39 (58.3) 30 (56.1) 36 (53.8) 31 (51.2) 20 (48.4) 2 (.5) 10 (42.5) 10 (39.3) 9 (.8) 6 (32.1) 3 (77.4) (.6) (73.7) 46 (69.7) 40 (67.5) 41 (.2) 00 (62.9) 30 36 (58.1) 30 (.4) 20 (52.5) 25 (49.5) 21 (46.3) 16 (42.7) 1200 (38.9) 8 (34.8) 0 (30) (77.3) (.8) (74.4) (72.9) (69.9) (66.9) (.4) (61.9) 32 (59.9) (57.8) 20 (.6) (53.5) 2300 (51.2) 20 (48.7) 17 (46.0) 10 (43.3) 1200 (.4) 0 (37.2) 6 (33.9) 3 (77.0) (.2) (69.8) (67.9) (.9) 20 (61.7) 20 (59.5) 20 (57.1) 2300 (54.7) 22 (52.1) 2000 (49.1) 17 (.9) 10 (42.3) 0 (38.2) 0 (33.9) M. boom angle for dicated length 29 3 3 31 Max. boom length at boom angle 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 059368 #LMI operatg code. Refer to LMI manual for structions. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only. 30

NBT: 39,01 m (128 ft) boom, 0 kg (0 lb) counterweight, 36, outriggers % extended, (heavy lift) 8 10 12 15 20 25 30 #81 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64.0) 82,8 56,0 29,8 (.2) 18,8 (21.8) (68.5) (64.1) 31,000 (56.2) 19,9 (47.4) 13,0 (37.2) 10,000 (25.2) (73.3) (.0) 31,6 (64.0) 20,0 (57.7) 14,0 (51.1) 10,5 (44.4) 00 (36.0) 00 (25.2) 49,5 46,0 32, (68.7) 20,8 (63.6) 14,7 (58.3) 10,8 (53.3) 8300 (47.3) 6300 (.7) (33.0) 30 (23.1) Mimum boom angle ( ) for dicated length Maximum boom length (ft) at boom angle 39,300 32,5 (72.4) 21,200 (68.1) 15,000 (63.7) 11, (59.6) (.0) (.0) (44.7) 38 (38.8) 28 (32.0) 20 (23.5) 10 (9.1) 27,200 (78.3) 25,200 (.0) 21,0 (71.5) 15,2 (67.7) 11,300 (.3) 60 (56.3) (52.0) 00 (47.5) (42.7) 2200 (37.3) 15 (31.2) 9 (23.7) NOTE: ( ) Boom angles are degrees. #LMI operatg code. Refer to LMI manual for operatg structions. Boom angle 21,000 (77.2) 19,0 (74.2) 15,5 (71.0) 11,0 (67.6) 87 (64.5) 60 (61.0) (57.4) 41 (53.7) 31 (49.8) 20 (.6) 16 (41.2) 1 (36.3) 0 (30.7) Liftg capacities at zero degree boom angle 31.7 43-A 54-B 64-C -D 15,0 (27.5) 70 (38.8) 00 (49.8) 26 12 16,0 (76.2) 15,7 11,0 (.4) 80 (67.6) (64.5) 50 (61.3) 42 (58.0) 32 (54.6) 20 (51.1) 17 (47.4) 1200 (43.5) 0 (39.3) 13,0 (77.8) 13,0 (.6) 11,9 (73.1) 9 (.4) 7200 (67.6) 50 (64.8) 40 (61.9) 30 (58.9) 25 (.8) 18 (52.7) 12 (49.4) 7 (.9) (74.9) (72.8) (.1) 57 (67.4) 00 (64.7) 12 29 37 44 48 30 (62.0) 26 (59.3) 1,9 (56.4) 10 (53.5) 8 (.5) NOTE: ( ) Reference radii. 059361 Series NBT 31

NBT: 7,9 m (26 ft) fixed and 7,9 m - 13,7 m (26 ft - ft) offsettable extension, 0 kg (0 lb) countwerweight, 36, outriggers % extended, (heavy lift) Feet 25 30 **26 ft LENGTH ft LENGTH # #87 #89 #8411 (.3) (71.9) 40 (69.8) 32 (67.5) 20 (.3) 16 (63.0) 10 (.7) 0 (58.3) 3 (77.4) (.6) 40 20 (68.2) 10 (.7) 12 (63.1) 0 (77.3) (.8) (74.4) (72.9) 00 (69.7) 25 (67.4) 10 (.3) 10 (63.3) 0 (61.1) 0 (59) 3 (77.0) (.2) 20 (69.2) 15 (66.7) 10 (64.2) 0 (61.7) M. boom angle for dicated length 58 6 59 61 Max. boom length at boom angle 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 059369 #LMI operatg code. Refer to LMI manual for structions. **26 ft capacities are applicable to both 26 ft fixed and 26 ft tele extension. BOOM EXTENSION CAPACITY NOTES: 1. All capacities above the bold le are based on structural strength limitations. 2. 26 ft and ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only 32

NBT: 39,01 m (128 ft) boom, 0 kg (0 lb) counterweight,36, outriggers 0% extended, (heavy lift) 8 10 12 15 20 25 30 #81 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128,6 (68.0),0 (64.0) 24,0 16,000 (41.6) 00 (24.2) 36,2 (71.3) 25,0 16,9 (56.9) 58 (48.3) 30 (38.3) 17 (25.2) Mimum boom angle ( ) for dicated length Maximum boom length (ft) at boom angle 26,300 (73.1) 17,0 (69.7) 10,0 (64.4) 6300 (58.2) 38 (51.6) 2200 (44.3) 9 (.9) 26,6 (76.0) 17,7 (73.1) 10,300 (68.8) 4 (58.6) 20 (53.0) 1200 (47.1) 18, (.9) 10,5 (72.2) 60 (68.0) 4300 (63.7) 26 (59.3) 10 (54.7) 0 (49.7) 18,0 (78.0) 10,0 (74.7) 6,9 (71.1) 40 (67.5) 27 (63.7) 15 (59.9) 0 (.8) 11,000 (76.8) 71 40 (.4) 20 (67.1) 16 7 (.4) 7300 (.5) 47 (72.6) (69.6) 17 (66.6) 0 (63.6) (77.3) 48 (74.6) 3 (71.9) 18 (69.2) 0 (66.4) 31 42 49 59 62 67 NOTE: ( ) Boom angles are degrees. #LMI operatg code. Refer to LMI manual for operatg structions. Liftg capacities at zero degree boom angle Boom angle 31.7 43-A 30 (27.5) 0 (38.8) 43 00 (76.1) 3200 10 (71.1) 9 (68.6) NOTE: ( ) Reference radii. 0593 Series NBT 33

Workg range NBT: 39,0 m (128 ft boom) with 7,9 m - 13,7 m (26 ft - ft) extension (mimum truck) 1 1 1 1 (Boom deflection not shown) 3 Offset Offset ' Ext. 26' Ext. 1 Height from ground 1 130 120 110 2 3 4 5 6 7 128 118 107 97 86 64 54 43 32 Boom length and extension 30 20 10 1 8 Max boom angle 0 1 1 1 130 120 110 20 1 30 10 Axis of Operatg radius from axis of rotation rotation (6' 9") (8' 7") Dimensions are for largest furnished hook block and headache ball with anti-two block activated. *This drawg shows the physical reach of the mache. Always refer to the load chart to see which portions of this diagram are valid for the specific mache configuration and where the loads are structurally or stability limited. 34

NBT: 39,01 m (128 ft) boom, 2722 kg (00 lb) counterweight, 36, outriggers % extended, (mimum truck) 8 10 12 15 20 25 30 105 110 115 120 #0001 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 118-H 128 120,000 (68.1) 94,1 (64) 82,8 69,7 53,1 (.3) 36,0 (21.8) (68.5) (64.1) (56.2) 43,0 (47.6),0 (37.4) 26,0 (23.6) (73.3) () 47,9 (64.2) 43,0 (58) 36,0 (51.3) 28, (43.9) 22,000 (.2) 17,0 (24) 49,5 46,0 41,0 (68.8) 37,1 33,0 (58.7) 28,0 22,0 (47) 18,0 (.3) 14,8 (32.4) 12,0 (22.2) 39,300 34, (72.5) 30, 27, (64.2) 24,0 22,0 (.2) 18,300 (.1) 15, (44.7) 12,6 (38.7) 10,0 (32.4) 9200 (23.9) *71 (9.4) 27,200 (78.3) 25,200 () 22,6 (71.6) 20,0 (68) 18,0 (64.3) 17,0 15,0 (56.5) 14,0 (52.4) 12,8 (47.8) 11,000 (43.4) (38) (31.9) 69 (24.3) 00 (13) Mimum boom angle ( ) for dicated length Maximum boom length (ft) at boom angle NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. Boom Angle 21,000 (77.2) 19,0 (74.2) 17,0 (71.2) 16,300 (68) 15, (64.8) 14,000 (61.5) 12,8 (58) 12,000 (54.4) 11,0 (.9) (46.7) 82 (42.2) 7 (37.3) 61 (31.7) 5300 (24.9) 40 (15.4) Liftg Capacities at Zero Degree Boom Angle Ma Boom Length Feet 16,0 (76.2) 15,7 14,0 13,6 (68) 12,5 () 11,7 (62) 10,9 (59.2) 10,300 (56) (52.6) (48.8) 72 (44.9) 62 (.6) (.9) 40 (30.6) (24.1) 00 (15.1) 31.7 43-A 54-B 64-C -D 86-E 97-F 107-G 17,9 (27.5) 10,000 (38.8) 68 (49.8) 6 42 28 (81.8) 17 (92.8) 0 (102.8) 13,0 (77.8) 13,0 (.6) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.9) 10,000 (63.2) (.4) 88 (57.5) (54.5) (51.2) (47.6) (43.9) (39.9) 41 (.6) 30 (30.6) 3 (24.8) 20 (16.9) 3 1 07 (74.9) (72.8) (.6) 87 (66) 78 (63.4) 00 (.7) 6300 (57.9) 50 (.1) 51 (52.1) 46 (49) 41 (.7) (42.2) 3300 (38.4) (34.3) 26 (29.6) 10 (23.8) 1 (15.9) NOTE: ( ) Reference radii. 0367 1 1 Series NBT