Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle with the locking function safety guard Intelligent accessory and interface for the integration of the limit switch box and actuators Integrated moulded bracket Application chemical and industrial plants Intended Use for shutting off pipeline systems Application Media Neutral and aggressive fluid or gaseous media free of solid particles, provided that the valve components coming into contact with the media are resistant at the operating temperature in accordance with the ASVresistance guide. Testing Requirements and tests/inspections according to DIN EN ISO 635 and ISO 9393. DIN EN 66, leakage rate A tested. Nominal Pressure (H O, 0 C) PN 0 PN 6 Fluid Temperature see pressure/temperature diagram Operating Pressure see pressure/temperature diagram Size DN 0 DN Body PVCU PP PVDF Stem PVCU PVDF PP, fiberglassreinforced Ball PVCU PP PVDF Ball Seat Sealing Actuation with lockable hand lever for the "OPEN" or "CLOSED" position. with electric actuator, DIN EN ISO 5 with pneumatic actuator, DIN EN ISO 5 union featuring a connection thread suitable for plastic materials refer comments on the identification numbers Mounting Position as required; electric drives may not be installed upside down Fastening via mounting base with integrated fixing threads Colour body: PVCU, grey, RAL 70 body: PP, grey, RAL 703 body: PVDF, opaque, yellowishwhite hand lever: ABS, black RAL 9005 lever inlay: ABS, orange, RAL 004
Ball Valve C 00 Pressure/temperature diagram Pressure loss curve (standard values for H O, 0 C) P = pressure loss Q = flow pressure loss and k v value The diagram shows the pressure loss P in relation to the flow Q. Conversion aid: c v = k v x 0.07; f v = k v x 0.0585 Units: k v [l/min]; c v [gal/min] US; f v [gal/min] GB Flow characteristic P = operating pressure T = temperature The pressure/temperature limits are applicable for the stated nominal pressures and a computed operating life factor of 5 years. These are standard values for harmless media (DIN 403), to which the valve material is resistant. For other media please refer to the ASV resistance guide. The durability of wear parts depends on the operating conditions of the application. For temperatures below 0 C (PP < +0 C) please specify the precise operating conditions of the application. The rated pressure depends on the valve size and material. For the corresponding rated pressure value of the valve, please refer to the»order table«vo = valve opening FR = K v value
Ball Valve C 00
Ball Valve C 00, manually body PVCU size 6 0 5 3 40 63 pressure range DN(mm) 0 5 0 5 3 40 3/8 / 3/4 /4 / PN(bar) 6 6 6 6 6 6 6 Ball seat sealing ident No. PVCU 45788 457 45790 4579 4579 45793 female thread Rp 45859 0.7 kg 45860 0.6 kg 4586 0.40 kg 4586 0.69 kg 45863 0.97 kg 45864. kg PVCU 45795 45796 45797 45798 45799 45800 socket ANSI 45866 45867 45868 45869 45870 4587 0.6 kg 0.4 kg 0.37 kg 0. kg 0.9 kg.64 kg PVCU 45780 4578 4578 45783 45784 45785 45786 socket DIN 4585 0.4 kg 4585 0.6 kg 45853 0.4 kg 45854 0.37 kg 45855 0.67 kg 45856 0.9 kg 45857. kg PE 4586 4587 4588 45 4580 458 spigot DIN 45887 0.7 kg 45888 0.5 kg 458 0.39 kg 4 0.69 kg 45 0.95 kg 45.69 kg GFR 45837 45838 45839 45840 4584 4584 flange DIN 45908 0.39 kg 45909 0.57 kg 4590 0.80 kg 459.40 kg 459.79 kg 4593. kg PP steel (ANSI) 45844 45845 45846 45847 45848 45849 flange ANSI 4595 0.60 kg 4596 0. kg 4597.5 kg 4598.79 kg 4599.3 kg 4590 3. kg
Ball Valve C 00, manually body PP size 6 0 5 3 40 63 pressure range DN(mm) 0 5 0 5 3 40 3/8 / 3/4 /4 / PN(bar) 0 0 0 0 0 0 0 Ball seat sealing ident No. PP 44994 44995 44996 44997 44998 44999 400 socket DIN 40 403 404 405 406 407 408 0. kg 0. kg 0.8 kg 0.7 kg 0.49 kg 0.66 kg. kg PP 44980 4498 4498 44983 44984 44985 spigot DIN 44987 44988 449 44990 4499 4499 0. kg 0.9 kg 0.8 kg 0. kg 0.54 kg.6 kg PE 40 4 4 43 44 45 spigot DIN 4 45 45 453 454 455 0.3 kg 0.0 kg 0.3 kg 0.54 kg 0.74 kg.34 kg GFR 45544 45545 45546 45547 45548 45549 flange DIN 4555 0.37 kg 4555 0.56 kg 45553 0.78 kg 45554.38 kg 45555.69 kg 45556.78 kg PP steel (ANSI) 45558 45559 45560 4556 4556 45563 flange ANSI 455 0.54 kg 45566 0.83 kg 45567.4 kg 45568.60 kg 45569.03 kg 45570 3.3 kg body PVDF size 6 0 5 3 40 63 pressure range DN(mm) 0 5 0 5 3 40 3/8 / 3/4 /4 / PN(bar) 6 6 6 6 6 6 6 Ball seat sealing ident No. PVDF socket DIN PVDF spigot DIN PP steel flange DIN PP steel (ANSI) flange ANSI 46 0.0 kg 4690 0.0 kg 4697 0. kg 4604 0. kg 46 0.66 kg 469 0.3 kg 4698 0.3 kg 4605.08 kg 46.00 kg 469 0.48 kg 4699 0.49 kg 4606.60 kg 463.4 kg 4693 0.85 kg 4600 0.86 kg 4607.53 kg 464.04 kg 4694.7 kg 460.9 kg 4608 3.08 kg 4. kg 4695.4 kg 460.7 kg 4609 4.53 kg 466 4.3 kg
Ball Valve C 00, manually dimensions DN(mm) 6 0 3/8 0 5 / 5 0 3/4 3 5 40 3 /4 40 / 63 dimensions(mm) Rp A GFR /PP steel b PP steel (ANSI) b B B C GFR /PPsteel d PP steel (ANSI) d GFR /PP steel D PP steel (ANSI) D D E h H H GFR /PP steel K PP steel (ANSI) K L (spigot PE) L (spigot PVDF) L (spigot PP) L PP/PVDF L PVCU L PP L3 PVCU L3 PVDF L3 M V 7 36 75 87 66 7 48 79 56.5 56 68 64 67.5 M 5 5,0 / 7 3 36 75 87 4 6 95 95 66 7 48 79 60 36.5 3 3 56.5 56 68 63 67.5 M 5 5,0 3/4 4 4 38 78 9 4 6 05 05 59 8 30 56.5 88 75 70 45 43.5 43.5 70 7 M 5 5,0 5 6 38 78 9 4 6 5 3 70 8.5 40 96 85 80 5 53 53 80 7 7 84 79 83 M 6 6 /4 7 8 44.5 8.5 08 8 6 40 30 86 9.5 46 84 8 00 7 7 0 85 85 00 94 99.5 M 8 45 / 7 8 44.5 8.5 08 8 6 33 00 9.5 55.5 4 0 98 69 9 9 30 07 96 05 M 8 45 9.5 8 9 46 84.5 8 0 60 5.5 43 70 5 57 5 8 0 78 0 0 8 08 8 M 8 45
Ball Valve C 00 parts lists position 3 4 5 6 7 8 9 4 5 6 quantity designation housing/body ball stem union threaded neck hand lever union end union nut ball seat Oring Oring Oring Oring sliding catch inlay for hand lever position 3 5 6 7 8 quantity designation ball valve mounting box, lower part mounting box, upper part hand lever lever extension connector limit switches (micro or proximity switches)