Butterfly Valve K 220 for application in the harsh environment of the chemical industry Advantage DN 20 to DN 400 liner as a element liner makes additional flange seals superfluous cost efficient and direct actuator mounting without mounting kit Application chemical plants industrial plants electroplating plants Intended Use for shutting off pipeline systems Flow Media Neutral and aggressive fluid or gaseous media, provided that the valve components coming into contact with the media are resistant at the operating temperature in accordance with the ASVresistance guide. Nominal Pressure (H 2 O, 20 C) PN PN Fluid Temperature see pressure/temperature diagram Operating Pressure see pressure/temperature diagram Size DN 20 DN 400 Body / ShutOff Disc PVCU/PVCU / / / Spindle stainless steel (1.430) Liner FPM Sealing FPM Actuation with hand lever, springloaded latch for locking plate with 7 notches, each 1 with gear box, 1:44 with electric actuator, DIN EN ISO 211 with pneumatic actuator, DIN EN ISO 211 intermediate flange construction with hole pattern DN 20 DN 400 acc. DIN EN 201, ANSI and JIS on request Mounting Position operating element preferably at the top Accessories limit switch unit Colour body: PVCU, grey, RAL 7011 body:, grey, RAL 7032 body:, opaque, yellowishwhite hand lever: PVCU, orange, RAL 2004
Butterfly Valve K 220 Pressure/temperature diagram Pressure loss curve (standard values for H 2 O, 20 C) P = pressure loss Q = flow pressure loss and k v value The diagram shows the pressure loss P in relation to the flow Q. Conversion aid: c v = k v x 0.07; f v = k v x 0.08 Units: k v [l/min]; c v [gal/min] US; f v [gal/min] GB Flow characteristic P = operating pressure T = temperature The pressure/temperature limits are applicable for the stated nominal pressures and a computed operating life factor of 2 years. These are standard values for harmless media (DIN 2403), to which the valve material is resistant. For other media please refer to the ASV resistance guide. The durability of wear parts depends on the operating conditions of the application. For temperatures below 0 C ( < +10 C) please specify the precise operating conditions of the application. The rated pressure depends on the valve and material. For the corresponding rated pressure value of the valve, please refer to the»order table«. VO = valve opening FR = K v value Torque (Nm) The specified torques are standard values. They were determined at the specified nominal pressures with H 2O, 20 C. These values can be higher or lower, depending on the operating pressure.
Butterfly Valve K 220 Bevel dimension for welding stubs Installation advice Machine a bevel to welding necks according to the table, prior to installing the butterfly valve in the pipe. Otherwise damage to the shutoff disc could occur and leaks would result. * on request Maximum permissible flange tightening torque (Nm) Operating note Safe operation of the valve can only be ensured if it is properly installed, operated, serviced or repaired by qualified personnel according to its intended use while observing the accident prevention regulations, safety regulations, relevant standards, directives/technical regulations or codes of practice such as e.g. DIN, DIN EN, DIN ISO and DVS*. *DVS = German Welding Society The intended use includes adhering to specified limit values for pressure and temperature, as well as checking the resistance. This requires all components coming into contact with the medium to be "resistant" in accordance with the ASV resistance guide.
Butterfly Valve K 220, gear box [d280 d400] body PVCU disc PVCU 10 12 14 1 PVCU 138729 138743 1.40 kg 138730 138744 24.20 kg 138731 13874 3.40 kg 138732 13874 2.30 kg body disc 10 12 14 1 13877 138771 13.40 kg 13878 138772 19.0 kg 13879 138773 29.80 kg 13870 138774 1.0 kg body disc 10 12 14 1 13878 138799 1.00 kg 13878 138800 22.20 kg 138787 138801 4.90 kg 138788 138802 7.20 kg
Butterfly Valve K 220, gear box [d280 d400] body disc 10 12 14 1 138813 138827 18.90 kg 138814 138828 27.80 kg 13881 138829 40.70 kg 13881 138830 71.70 kg
dimensions 400 3 31 280 400 30 300 20 DN(mm) 1 14 12 10 dimensions(mm) 10 119. 127 104 b1 1 127 131. 109 b2 8 8 73 73 h3 27/14 23/1 23/12 23/12 ØxZ M24/2 MxZ 88 2 488 40 D 9 30 490 411 D PVCU 83 18 480 402 D 300 300 200 200 D2 342 297 297 238 h1 34 300 298 239. h1 PVCU 340 293 291 233 h1 379.7 334.7 329 270 H2 382.7 337.7 330 271. H2 PVCU 377.7 330.7 323 2 H2 1 40 400 30 K 217 217 177 177 L1 7 7 2 2 L2 10 10 100 100 L3 38. 348 302. 247. S 2 t Butterfly Valve K 220, gear box [d280 d400]
Butterfly Valve K 220, electric [d280 d400] Voltage please refer to the technical data Screws stainless steel (1.4301) Actuator variant 230 V body PVCU disc PVCU 10 12 14 1 PVCU 1387299230 1387439230 30.70 kg 1387309230 1387449230 38.0 kg 1387319230 138749230 4.00 kg 1387329230 138749230.0 kg Actuator variant 230 V body disc 10 12 14 1 138779230 1387719230 27.70 kg 138789230 1387729230 33.80 kg 138799230 1387739230 40.0 kg 138709230 1387749230 4.90 kg Actuator variant 230 V body disc 10 12 14 1 138789230 1387999230 29.30 kg 138789230 1388009230 3.0 kg 1387879230 1388019230.0 kg 1387889230 1388029230 0.40 kg
Butterfly Valve K 220, electric [d280 d400] Actuator variant 230 V body disc 10 12 14 1 1388139230 1388279230 41.00 kg 1388149230 1388289230 1.10 kg 138819230 1388299230 91.70 kg 138819230 1388309230 84.0 kg
dimensions 400 3 31 280 400 30 300 20 DN(mm) 1 14 12 10 VT1000 VT1000 VT00 VT00 actuator type dimensions(mm) 10 119. 127 104 b1 1 127 131. 109 b2 27/14 23/1 23/12 23/12 ØxZ M24/2 MxZ 88 2 488 40 D 9 30 490 411 D PVCU 83 18 480 402 D 342 297 297 238 h1 34 300 298 239. h1 PVCU 340 293 291 233 h1 349 349 349 349 H 1 40 400 30 K 102 102 102 102 N 140 140 140 140 N1 228 228 228 228 O 240 240 240 240 O1 38. 348 302. 247. S 2 t Butterfly Valve K 220, electric [d280 d400]
Butterfly Valve K 220, electric [d280 d400] Technical data VTLine Option (to be ordered additionally if required) 2 additional limit switches; long hand lever; failsafe rechargeable battery pack (internal/external); positioner; Feedback: potentiometer; feedback: 4... 20mA; positioner: 4... 20mA / 0... 10V; AS Interface connection; ATEX version; Duty cycle: 80% actuator type Torque Voltage Manipulating time(s) Power consumption(w) Setting angle( ) Weight(kg) Duty cycle(%) Type of protection Temperature( C) Recommended wiring VTLine VT00 00 230 VAC 38 20 90 17.1 0 IP 7 20... 70 VT1000 1000 230 VAC 38 20 90 17.1 0 IP 7 20... 70 NO1 = limit switch 1 open NO2 = limit switch 2 open NC1 = limit switch 1 closed NC2 = limit switch 2 closed»a«= open»b«= closed manual emergency control VTLine Prior to manual commissioning ensure that the electricity supply is interrupted. It is not necessary to disengage the coupling; it is sufficient to turn the handwheel.
Butterfly Valve K 220, pneumatic [d280 d400] Control Pressure bar Control Function NC (normally closed) NO (normally open) (double acting) Screws stainless steel (1.4301) Actuator variant NC body PVCU disc PVCU 10 12 14 1 PVCU 13872990 13874390 0.00 kg 13873090 13874490 79.80 kg 13873190 1387490 87.30 kg 13873290 1387490 10.80 kg Actuator variant NO body PVCU disc PVCU 10 12 14 1 PVCU 138729970 138743970 0.00 kg 138730970 138744970 79.80 kg 138731970 13874970 87.30 kg 138732970 13874970 10.80 kg Actuator variant body PVCU disc PVCU 10 12 14 1 PVCU 138729980 138743980 22.70 kg 138730980 138744980 40.80 kg 138731980 13874980 48.30 kg 138732980 13874980 7.80 kg
Butterfly Valve K 220, pneumatic [d280 d400] Actuator variant NC body disc 10 12 14 1 1387790 13877190 47.00 kg 1387890 13877290 7.10 kg 1387990 13877390 81.70 kg 1387090 13877490 9.10 kg Actuator variant NO body disc 10 12 14 1 13877970 138771970 47.00 kg 13878970 138772970 7.10 kg 13879970 138773970 81.70 kg 13870970 138774970 9.10 kg Actuator variant body disc 10 12 14 1 13877980 138771980 19.70 kg 13878980 138772980 3.10 kg 13879980 138773980 42.70 kg 13870980 138774980 7.10 kg
Butterfly Valve K 220, pneumatic [d280 d400] Actuator variant NC body disc 10 12 14 1 1387890 13879990 48.0 kg 1387890 13880090 77.80 kg 13878790 13880190 10.80 kg 13878890 13880290 101.70 kg Actuator variant NO body disc 10 12 14 1 13878970 138799970 48.0 kg 13878970 138800970 77.80 kg 138787970 138801970 10.80 kg 138788970 138802970 101.70 kg Actuator variant body disc 10 12 14 1 13878980 138799980 21.30 kg 13878980 138800980 38.80 kg 138787980 138801980 7.80 kg 138788980 138802980 2.70 kg
Butterfly Valve K 220, pneumatic [d280 d400] Actuator variant NC body disc 10 12 14 1 13881390 13882790 0.00 kg 13881490 13882890 79.80 kg 1388190 13882990 87.30 kg 1388190 13883090 10.80 kg Actuator variant NO body disc 10 12 14 1 138813970 138827970 0.00 kg 138814970 138828970 79.80 kg 13881970 138829970 87.30 kg 13881970 138830970 10.80 kg Actuator variant body disc 10 12 14 1 138813980 138827980 22.70 kg 138814980 138828980 40.80 kg 13881980 138829980 48.30 kg 13881980 138830980 7.80 kg
dimensions 400 3 31 280 400 30 300 20 DN(mm) 1 14 12 10 P40T PA70S P40T P0ST P40T P0ST P30T P40ST actuator type dimensions(mm) 10 119. 127 104 b1 1 127 131. 109 b2 27/14 23/1 23/12 23/12 ØxZ M24/2 MxZ 88 2 488 40 D 9 30 490 411 D PVCU 83 18 480 402 D 342 297 297 238 h1 34 300 298 239. h1 PVCU 340 293 291 233 h1 272 272 272 211 H 313 313 313 272 H 1 40 400 30 K 444 444 444 349 N 94 94 94 98 N 10 10 10 83 O 122. 122. 122. 10 O 120 120 120 94 P 13 13 13 120 P 38. 348 302. 247. S 2 t Butterfly Valve K 220, pneumatic [d280 d400]
Butterfly Valve K 220, pneumatic [d280 d400] Technical data PALine Option (to be ordered additionally if required) limit switch unit; positioner; handwheel; pilot solenoid valve; AS Interface connection actuator type Function Torque (start) at bar(nm) Torque (end) at bar(nm) Control volume (Opening)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) Control pressure connection PA70S 3273 104 31 0.8 0.8 1/4 118.2 Normally closed NC: control pressure to connection»b«,valve opens Normally open NO: control pressure to connection»b«,valve closes Double acting : control pressure to connection»a«,valve closes control pressure to connection»b«,valve opens Control: 3/2way solenoid valves for actuators /2way solenoid valves for actuators Note: The drives require a control pressure of bar for optimum function. Malfunctions may occur, if the control pressure deviates. In this case, a new drive configuration is necessary. Technical data PLine Option (to be ordered additionally if required) limit switch unit; positioner; handwheel; pilot solenoid valve; AS Interface connection actuator type Function Torque (start) at bar(nm) Torque (end) at bar(nm) Control volume (Opening)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) actuator type Function Torque (start) at bar(nm) Control volume (Opening)(Liter) Control volume (Closing)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) P40ST 88 413.3 2 2 1/4 3.4 P30T 49 2.0 1.9 0. 0. 1/4 9.1 P0ST 1343.8 81.4 10. 1/4 8.4 P40T 1180.3.3 1.2 1.2 1/4 19.4
Butterfly Valve K 220, pneumatic [d280 d400] Control pressure connection Normally closed NC: control pressure to connection»b«,valve opens Normally open NO: control pressure to connection»b«,valve closes Double acting : control pressure to connection»a«,valve closes control pressure to connection»b«,valve opens Control: 3/2way solenoid valves for actuators /2way solenoid valves for actuators Note: The drives require a control pressure of bar for optimum function. Malfunctions may occur, if the control pressure deviates. In this case, a new drive configuration is necessary.
Butterfly Valve K 220, pneumatic [d280 d400]