EXPERIENCE THE DIFFERENCE

EXPERIENCE THE DIFFERENCE FOUR WHEEL DRIVE SHOCK ABSORBERS www.toperformance.com.au

HEAVY TRACK AND RAID SERIES The KONI four wheel drive shock absorber range has been developed through years of off road testing, with African deserts and the Australian outback being two major testing grounds. The KONI Heavy Track and RAID ranges are designed to improve vehicle damping characteristics both on-road and off-road. Specifically designed for SUV, 4WD, and Light Truck applications, these shock absorbers have been chosen as the damper of choice for support vehicles on the Dakar Rally, the team at Beadell Tours as they travel the Australian desert, and as the preferred damper for the Top Gear North Pole Special. KONI shock absorbers offer safety, durability, reliability, and performance which is second to none. With 3 years unlimited km s warranty, KONI offers peace of mind for you and your family. When asphalt comes to an end; and gravel, dirt and dust are too tempting, HEAVY TRACK 4x4 shock absorbers by KONI are the ideal all-terrain option. These shock absorbers will deliver optimum road holding and comfort both on and off road. HEAVY TRACK shock absorbers from KONI are perfect all road shock absorbers. Tested under extreme conditions Provides optimum road holding, handling and comfort Adjustable rebound forces for on and off road conditions Specially developed, using high quality materials for maximum performance Better driving characteristics Long lifespan KONI sets new off road standards with RAID, a unique blend of innovative high performance technology and superior 4x4 expertise. When it comes to discovering outback tracks and mountain trails, KONI has developed an all-terrain damper without compromise. Tested in the outback and proven in the Dakar Rally, RAID offers optimum handling over the most difficult terrain. Large oil holding capacity for better heat dissipation Huge body diameter, with massive 42mm piston, and solid, strengthened mounts Maximum vehicle stability Adjustable rebound forces Servicable for added lifespan Excellent performance, durability gives low cost per kilometre 2 FOUR WHEEL DRIVE SHOCK ABSORBERS

30 Series High pressure gas filled mono-tube Large 46mm piston 50mm body diameter Rebound Adjustable 82 Series Twin-tube hydraulic and gashydraulic 50mm to 55mm outer body diameter 33mm piston with Teflon coated band For standard and raised applications Rebound adjustable and servicable Proven in the 4WD industry for years 88 Series Twin-tube hydraulic, oil filled 55mm outer body diameter Big 36mm piston with Teflon coated band Heat resistant Viton seals Ideal for off road and desert situations For raised applications (up to 50mm) Rebound adjustable and servicable 90 Series Twin-tube hydraulic, oil filled Huge 70mm outer body diameter Massive 42mm Teflon coated piston Hard chromed 18mm rod Special heat resistant Viton seals For raised applications (up to 50mm) Large oil capacity for efficient heat dissipation Proven in the Simpson Desert, Canning Stock Route and Dakar Rally www.toperformance.com.au 3

SUPPLEMENTARY LIST OF KONI SHOCK ABSORBERS TO SUIT 4WD VEHICLES APPLICATION YEAR LENGTH RANGE TYPE FRONT FITTINGS REAR FITTINGS NOTES AUDI Q7 Q7 05-10 Standard height FSD Gas-hydraulic 2100-4079 Excl. air suspension, S-Line BMW X3 X3 (E83) 03-10 Standard height FSD Gas-hydraulic 2100-4140 CHEVROLET K1500 / K2500 / K3500 K1500 / K2500 / K3500 PICKUP 87-99 Standard height HEAVY TRACK Hydraulic 82-2372 O/O 82-2384 O/O K1500 / K2500 SURBURBAN 92-98 Standard height HEAVY TRACK Hydraulic 82-2372 O/O 82-2384 O/O FORD ESCAPE ESCAPE SUV 01-04 Standard height HEAVY TRACK Gas-hydraulic 8641-1480 INSERT 8240-1220 I/O Motorcraft OE struts only (front) F SERIES F100 / F250 / F350 74-80 Standard height HEAVY TRACK Hydraulic 82-1518 I/O F100 / F150 / F250 81-94 Standard height HEAVY TRACK Hydraulic 82-1969SP2 I/O 82-2247 O/O F250 / F350 Super Duty 00-08 Standard height HEAVY TRACK Hydraulic 88-1719 O/O 88-1720 O/O Rear leading HEAVY TRACK Hydraulic 88-1721 O/O Rear trailing MAVERICK SWB* / LWB 89-94 Standard height HEAVY TRACK Hydraulic 82-2347SP1 I/I 82-2348SP1 O/O Long travel HEAVY TRACK Hydraulic 82-2347 I/I 82-2348 O/O *SWB see note 1 Long travel HEAVY TRACK Hydraulic 88-1686 I/I 88-1687 O/O Long travel RAID Hydraulic 90-5370SP1 I/I 90-5371SP1 O/O RANGER RANGER 07-11 Standard height HEAVY TRACK Hydraulic 82-2591 I/O 82-2312 + MODS O/O 0-25mm Long travel RAID Hydraulic 90-5405 I/O 90-5406 O/O 0-25mm 11- Std & Long travel HEAVY TRACK Hydraulic 82-2603SP1 I/O 82-2604 O/O Coil front, see note 5 HOLDEN JACKAROO UBS 16, 17, 52, 55 87-91 Standard height HEAVY TRACK Gas 30-1365 I/O 30-1366 I/O Rear pin / eye fittings HEAVY TRACK Gas 30-1372 O/O Rear eye / eye fittings Standard height HEAVY TRACK Hydraulic 82-2591 I/O Alternate part number UBS 25, 69, 59, 73 92-00 Standard height HEAVY TRACK Gas 30-1565 I/O 30-1566 O/O RODEO TFS 08.88-98 Standard height HEAVY TRACK Gas 30-1365 I/O 30-1366 I/O Rear pin / eye fittings HEAVY TRACK Gas 30-1372 O/O Rear eye / eye fittings HEAVY TRACK Hydraulic 82-2297 O/O Alternate part number TFS 02.98-00 Standard height HEAVY TRACK Gas 30-1565 I/O 30-1664 I/O Rear pin / eye fittings HEAVY TRACK Hydraulic 82-2138 O/O Rear eye / eye fittings RA 03-08 Standard height HEAVY TRACK Hydraulic 82-2591 I/O 82-2592 O/O Torsion bar front LONG travel shock absorbers are listed in BOLD print 4 FOUR WHEEL DRIVE SHOCK ABSORBERS

APPLICATION YEAR LENGTH RANGE TYPE FRONT FITTINGS REAR FITTINGS NOTES RA Standard height HEAVY TRACK Hydraulic I/O 82-2138 O/O Alternate part number Long travel HEAVY TRACK Hydraulic N/A 82-2297 O/O COLORADO COLORADO RC 08-11 Standard height HEAVY TRACK Hydraulic 82-2591 I/O 82-2592 O/O Torsion bar front Standard height HEAVY TRACK Hydraulic I/O 82-2138 O/O Alternate part number Long travel HEAVY TRACK Hydraulic N/A 82-2297 O/O COLORADO RG 12- Standard height HEAVY TRACK Hydraulic 82-2607SP1 I/O 82-2608 O/O Coil front, see note 5 Long travel HEAVY TRACK Hydraulic 82-2607SP1 82-2138 O/O Long travel RAID Hydraulic 88-5395 I/O 90-5458 O/O Coil front, see note 5 HONDA CR-V CR-V 97-01 Standard height HEAVY TRACK Gas-hydraulic 8041-1243 I/O 8040-1244 CR-V (RD8) 02-09.06 Standard height HEAVY TRACK Gas-hydraulic 8641-1458 INSERT 8040-1320 I/O I/O Original Equip strut only (front) Standard height FSD Gas-hydraulic 2100-4067 Original Equip strut only (front) HUMMER H SERIES H3 05-10 Standard height RAID Hydraulic 90-5445 I/[ 90-5446 O/O HYUNDAI TERRACAN 2.9 CRDi, 3.5 V6 01-05 Standard height HEAVY TRACK Hydraulic 82-2520 I/O 82-2521 I/O ix35 / TUCSON 2.0, 2.4, 1.7 CRDI, 2.0 CRDI 09-13 Standard height HEAVY TRACK Gas-hydraulic 8641-1550 INSERT 8240-1287 Original Equip strut only (front) Standard height FSD 2100-4133 Original Equip strut only (front) SANTA FE CM (2WD & 4WD) 09.09-06.12 Standard height HEAVY TRACK Hydraulic 87-2659L/R STRUT 82-2612 Excluding self-levelling Standard height FSD 2100-4169 Excluding self-levelling DM (4WD) 07.12-15 Standard height HEAVY TRACK Hydraulic 87-2660L/R INSERT 82-2623 Excluding self-levelling Standard height FSD 2100-4174 Excluding self-levelling ISUZU D-MAX D-MAX 08-11 Standard height HEAVY TRACK Hydraulic 82-2591 I/O 82-2592 O/O Torsion bar front Standard height HEAVY TRACK Hydraulic I/O 82-2138 O/O Alternate part number Long travel HEAVY TRACK Hydraulic N/A 82-2297 O/O D-MAX 12- Standard height HEAVY TRACK Hydraulic 82-2607SP1 I/O 82-2608 O/O Coil front, see note 5 Long travel HEAVY TRACK Hydraulic 82-2607SP1 82-2138 O/O Long travel RAID Hydraulic 88-5395 I/O 90-5458 O/O Coil front, see note 5 JEEP CHEROKEE XJ 84-01 Standard height HEAVY TRACK Gas 30-1348 I/O 30-1630 O/O KJ/KK 01-13 Standard height HEAVY TRACK Gas-hydraulic 8240-1201SPX I/O 8240-1202SPX O/O COMMANDER WH/WK 05-10 Standard height HEAVY TRACK Gas-hydraulic 8240-1264 CLEV 8240-1265 O/O Standard height FSD Gas-hydraulic 2100-4108 GRAND CHEROKEE ZJ 93-98 Standard height HEAVY TRACK Gas 30-1624 I/O 30-1625 O/O Standard height HEAVY TRACK Gas-hydraulic 8240-1198SPX I/O 8240-1199SPX O/O WJ 99-04 Standard height HEAVY TRACK Gas-hydraulic 8240-1176SPX I/O 8240-1177SPX O/O LONG travel shock absorbers are listed in BOLD print www.toperformance.com.au 5

APPLICATION YEAR LENGTH RANGE TYPE FRONT FITTINGS REAR FITTINGS NOTES WH 4.7 V8, 5.7 V8, 3.0 V6 CRD 05-11 Standard height HEAVY TRACK Gas-hydraulic 8240-1264 CLEV 8240-1265 O/O Standard height FSD Gas-hydraulic 2100-4108 WRANGLER TJ 96-05 Standard height HEAVY TRACK Gas 30-1348 I/O 30-1630 O/O JK 2.8 V6, 2.8 CRD 08.06-13 Standard height HEAVY TRACK Gas-hydraulic 8240-1262 I/O 8240-1263 O/O Long travel RAID Hydraulic 90-5456 I/O 90-5457 O/O 0-40mm KIA SORENTO 2.4 16V, 2.5 CRDi, 3.5 V6 02-05 Standard height HEAVY TRACK Gas-hydraulic 8240-1214L/R I/O 8240-1215 O/O Standard height FSD Gas-hydraulic 2100-4023 2.5 CRDi VGT, 3.3 V6, 3.8 V6 06.06-04.09 Standard height HEAVY TRACK Gas-hydraulic 8240-1253L/R I/O 8240-1249 I/O Standard height FSD Gas-hydraulic 2100-4072 XMA (2WD & 4WD) 09-12.12 Standard height HEAVY TRACK Gas-hydraulic 87-2659L/R STRUT 82-2612 Excluding self-levelling Standard height FSD Gas-hydraulic 2100-4169 Excluding self-levelling XM (4WD) 01.12-11.14 Standard height HEAVY TRACK Hydraulic 87-2660L/R INSERT 82-2623 Excluding self-levelling Standard height FSD 2100-4174 Excluding self-levelling AGE 2.0, 2.0 16V, DIESEL 94-99 Standard height HEAVY TRACK Gas-hydraulic N/A 8240-1148 I/O 2.0, 2.7 V6, 2.0 CRDi 04-10 Standard height HEAVY TRACK Gas-hydraulic 8641-1503 INSERT 8641-1504 INSERT Original Equip strut only (front) Standard height FSD Gas-hydraulic 2100-4066 Original Equip strut only (front) 2.0, 2.4, 1.7 CRDI, 2.0 CRDI 10-13 Standard height HEAVY TRACK Gas-hydraulic 8641-1550 INSERT 8240-1287 Original Equip strut only (front) Standard height FSD Gas-hydraulic 2100-4133 Original Equip strut only (front) LAND ROVER DISCOVERY Series I 89-94 Standard height HEAVY TRACK Gas 30-1311 I/I 30-1312 O/I Standard height HEAVY TRACK Gas-hydraulic 8240-1181SPX I/I 8240-1190SPX O/I Long travel HEAVY TRACK Gas 30-1311SP1 I/I 30-1312SP1 O/I Caution, check trapped length Long travel RAID Hydraulic 90-5374SP1 I/I 90-5375SP1 O/I Front 0-50mm, Rear 0-40mm Long travel RAID Hydraulic 90-5401 O/I 40-60mm Series I (MA) 94-98 Standard height HEAVY TRACK Gas 30-1311 I/I Long travel HEAVY TRACK Gas 30-1311SP1 I/I Caution, check trapped length Long travel RAID Hydraulic 90-5374SP1 I/I 90-5375SP1 O/I Front 0-50mm, Rear 0-40mm Long travel RAID Hydraulic 90-5401 O/I 40-60mm Series II 99-04 Standard height HEAVY TRACK Gas-hydraulic 8240-1178SPX O/O 8240-1179SPX O/O Incl. air suspension Long travel RAID Hydraulic 90-5452 O/O 90-5453 O/O 0-30mm DEFENDER 90/110/130 84- Standard height HEAVY TRACK Gas 30-1311 I/I 30-1312 O/I Standard height HEAVY TRACK Gas-hydraulic 8240-1181SPX I/I 8240-1190SPX O/I Long travel HEAVY TRACK Gas 30-1311SP1 I/I 30-1312SP1 O/I Caution, check trapped length Long travel RAID Hydraulic 90-5374SP1 I/I 90-5375SP1 O/I Front 0-50mm, Rear 0-40mm Long travel RAID Hydraulic 90-5401 O/I 40-60mm RANGE ROVER RANGE ROVER 71-96 Standard height HEAVY TRACK Gas 30-1311 I/I 30-1312 O/I (INCL. CLASSIC) 94-96 Standard height HEAVY TRACK Gas-hydraulic 8240-1181SPX I/I 8240-1190SPX O/I Long travel HEAVY TRACK Gas 30-1311SP1 I/I 30-1312SP1 O/I Caution, check trapped length Long travel RAID Hydraulic 90-5374SP1 I/I 90-5375SP1 O/I Front 0-50mm, Rear 0-40mm Long travel RAID Hydraulic 90-5401 O/I 40-60mm LONG travel shock absorbers are listed in BOLD print 6 FOUR WHEEL DRIVE SHOCK ABSORBERS

APPLICATION YEAR LENGTH RANGE TYPE FRONT FITTINGS REAR FITTINGS NOTES CLASSIC 94-96 Steer damper HEAVY TRACK Gas 026-1580 I/I MK 2 (excl. CLASSIC) 95-01 Standard height HEAVY TRACK Gas 30-1597 O/I 30-1598 O/I With air suspension MAZDA B2500 / BT 50 B2500 / BT 50 99-11 Standard height HEAVY TRACK Hydraulic 82-2591 I/O 82-2312 + MODS O/O 0-25mm Long travel RAID Hydraulic 90-5405 I/O 90-5406 O/O 0-25mm 12- Std & Long travel HEAVY TRACK Hydraulic 82-2603SP1 I/O 82-2604 O/O Coil front, see note 5 TRIBUTE TRIBUTE SUV 01-05 Standard height HEAVY TRACK Gas-hydraulic 8641-1480 INSERT 8240-1220 I/O Motorcraft OE struts only (front) MITSUBISHI CHALLENGER CHALLENGER PA 97-00 Standard height HEAVY TRACK Gas / hydraulic 30-1456 I/O 82-2138 O/O Leaf spring rear CHALLENGER PA II 00-07 Standard height HEAVY TRACK Gas 30-1456 I/O 30-1705 O/O Coil spring rear Long travel HEAVY TRACK Hydraulic N/A 82-2370 O/O Coil spring rear CHALLENGER PB 08-13 Standard height HEAVY TRACK Gas-hydraulic 8240-1270 I.D Coil spring rear OUTLANDER OUTLANDER 03-05.04 Standard height HEAVY TRACK Gas-hydraulic N/A 8040-1346 I/O PAJERO L040G - L049G NA 83-91 Standard height HEAVY TRACK Gas 30-1318 I/O 30-1319 O/O Torsion front, Leaf rear 2.5 TDi, 3.0i NG 89-91 Standard height HEAVY TRACK Gas 30-1318 I/O 30-1408 O/O Torsion front, Coil rear 2.5 TD, 2.8 TDi, 3.0 V6 NH, NL 91-09.99 Standard height HEAVY TRACK Gas 30-1456 I/O 30-1457 I/O Torsion front, Coil rear NM, NP, NS, NT 00- Standard height HEAVY TRACK Hydraulic 82-2505 I/O 82-2506 I/O Coil front, coil rear Long travel RAID Hydraulic 90-5443 I/O 88-5389 I/O See note 5 TRITON ME/MF/MG/MH 87-93 Standard height HEAVY TRACK Gas 30-1318 I/O 30-1319 O/O 4X4 MJ 87-93 Standard height HEAVY TRACK Hydraulic 82-2354 I/O MK 96-05 Standard height HEAVY TRACK Gas 30-1456 I/O 30-1459 O/O ML 06- Standard height HEAVY TRACK Gas-hydraulic 8240-1270 I/O 8240-1271SP1 O/O Long travel RAID Hydraulic 88-5390 I/O 90-5458 O/O See note 5 NISSAN NAVARA D21-D22 86-10.05 Standard height Gas 30-1342 I/O 30-1343 O/O Long travel HEAVY TRACK Hydraulic I/O 82-2138 O/O See note 5 D40 05- Standard height HEAVY TRACK Hydraulic 82-2570 I/O 82-2572SP1 O/O See note 5 Long travel RAID Hydraulic 90-5450 I/O 90-5451 O/O See note 5 PATHFINDER R51 05-14 Standard height HEAVY TRACK Hydraulic 82-2570 I/O 82-2571 O/O PATROL MQ MK 80-05.82 Standard height HEAVY TRACK Hydraulic 80-2577 I/I 80-2539 O/I Long travel HEAVY TRACK Hydraulic 80-2577 I/I 80-2539 O/I GQ (Y60) SWB* / LWB 88-97 Standard height HEAVY TRACK Hydraulic 82-2347SP1 I/I 82-2348SP1 O/O Long travel HEAVY TRACK Hydraulic 82-2347 I/I 82-2348 O/O *SWB see note 1 Long travel HEAVY TRACK Hydraulic 88-1686 I/I 88-1687 O/O Designed for desert use Long travel RAID Hydraulic 90-5370SP1 I/I 90-5371SP1 O/O Steering damper HEAVY TRACK Gas 026-1635 I/I Pin / pin configuration only GU (Y61) LWB 98- Standard height HEAVY TRACK Hydraulic 82-2347SP1 I/I 82-2348SP1 O/O Long travel HEAVY TRACK Hydraulic 82-2347 I/I 82-2348 O/O LONG travel shock absorbers are listed in BOLD print www.toperformance.com.au 7

APPLICATION YEAR LENGTH RANGE TYPE FRONT FITTINGS REAR FITTINGS NOTES GU (Y61) LWB Long travel HEAVY TRACK Hydraulic 88-1686 I/I 88-1687 O/O Designed for desert use Long travel RAID Hydraulic 90-5370SP1 I/I 90-5371SP1 O/O Steer damper HEAVY TRACK Gas 026-1580 I/I Pin / pin configuration only X TRAIL T30 01-06 Standard height HEAVY TRACK Gas-hydraulic 8641-1451 INSERT 8641-1452 T30 01-06 Standard height HEAVY TRACK Gas-hydraulic 8641-1464 INSERT 8641-1465 PORSCHE CAYENNE INSERT INSERT 51mm Unisia-Jecs Struts only 50mm Atsugi Struts only CAYENNE 09.02-03.10 Standard height FSD Gas-hydraulic 2100-4080 Excl. air suspension SSANG YONG MUSSO MUSSO 602 94-05 Standard height HEAVY TRACK Gas 26-1621 I/O 26-1622 I/O REXTON 2.3 16V, 3.2 24V, 2.9TD 02-05 Standard height HEAVY TRACK Gas-hydraulic 8240-1204 STRUT 8040-1298 I/O 320, 270XDi (excl. SPR) 06-13 Standard height HEAVY TRACK Gas-hydraulic 8240-1281 STRUT 8040-1404 I/O LIVE AXLE REAR 80-2902 I/O IRS REAR SUZUKI JIMNY JIMNY 10.98-13 Standard height HEAVY TRACK Gas-hydraulic 8040-1300 I/O 8040-1301 O/O VITARA VITARA / GRAND VITARA, X-90 88-05 Standard height HEAVY TRACK Gas-hydraulic 8741-1394 STRUT 8040-1106 GRAND VITARA XR-7 2.7 V6 01-06 Standard height HEAVY TRACK Gas-hydraulic 8741-1394 STRUT N/A GRAND VITARA I/O Excl. XR-7 1.6, 2.0, 1.9D, 2.7, 3.2 05-14 Standard height HEAVY TRACK Gas-hydraulic 8641-1510 INSERT 8240-1256 O/O Original Equip strut only (front) TOYOTA BUNDERA Standard height FSD Gas-hydraulic 2100-4077 Original Equip strut only (front) LJ70, 73 / RJ70, 73 / BUNDERA 85-89 Standard height HEAVY TRACK Gas 30-1268 I/I 30-1269L I/O Coil springs, up to chassis no. 09048994 Gas 30-1270R O/O LJ70, 73 / RJ70, 73 / BUNDERA 90-94 Standard height HEAVY TRACK 82-2374 O/I 82-2375 O/I Coil springs, from chassis no. 09048995 FOUR RUNNER LN105, 106 / YN105, 106 86-89 Standard height HEAVY TRACK Hydraulic 82-2293 82-2272 O/O Leaf springs front & rear Long travel HEAVY TRACK Hydraulic 82-2293 I/O 82-2294 O/O LN61, 63, 108, 110 / YN63, 110 / RN106, 110 86-89 Standard height HEAVY TRACK Hydraulic 82-2317 I/O 82-2272 O/O Torsion bar front, leaf spring rear Long travel HEAVY TRACK Hydraulic N/A 82-2294 O/O Long travel HEAVY TRACK Hydraulic N/A 82-2312 O/O Alternate part number V6 VZN130L, LN130L DIESEL 90-96 Standard height HEAVY TRACK Hydraulic 82-2317 I/O 82-2205 I/O Torsion bar front, coil spring rear Long travel HEAVY TRACK Hydraulic N/A 82-2296 I/O HI LUX 79-83 79-83 Standard height HEAVY TRACK Hydraulic 82-2138 O/O Leaf springs front & rear Long travel HEAVY TRACK Hydraulic 82-2293 I/O 82-2297 O/O YN65R, 67 / LN65, 67 / RN105 84-04 Standard height HEAVY TRACK Hydraulic 82-2272 O/O Leaf springs front & rear Long travel HEAVY TRACK Hydraulic 82-2293 I/O 82-2294 O/O RN110 / LN111, 165, 170 / RZN168, 173 08.88-04 Standard height HEAVY TRACK Hydraulic 82-2317 I/O 82-2272 O/O Torsion bar front, leaf spring rear Long travel HEAVY TRACK Hydraulic N/A 82-2294 O/O LONG travel shock absorbers are listed in BOLD print 8 FOUR WHEEL DRIVE SHOCK ABSORBERS

APPLICATION YEAR LENGTH RANGE TYPE FRONT FITTINGS REAR FITTINGS NOTES RN110 / LN111, 165, 170 / RZN168, 173 Long travel HEAVY TRACK Hydraulic N/A 82-2312 O/O HI LUX 05- Standard height HEAVY TRACK Hydraulic 82-2560 I/O 82-2561 O/O Standard height RAID Hydraulic 90-5410 O/O Alternate part number Long travel HEAVY TRACK Hydraulic 88-1713 I/O 82-2312 O/O See note 5 LANDCRUISER FJ40, 42, 43, 45 / HJ45 SERIES 60-79 Standard height HEAVY TRACK Hydraulic 80-1904 O/O 82-2138 O/O Long travel HEAVY TRACK Hydraulic 82-5020 O/O 82-2297 O/O BJ40, 42, 43, 45, 46 SERIES 74-84 Long travel HEAVY TRACK Hydraulic 82-5020 O/O 82-2297 O/O HJ41, 45, 47 SERIES 80-84 Long travel HEAVY TRACK Hydraulic 82-5020 O/O 82-2297 O/O FJ40, 43, 45 SERIES 80-86 Long travel HEAVY TRACK Hydraulic 82-5020 O/O 82-2297 O/O FJ60 / HJ60 SERIES -10.85 Standard height HEAVY TRACK Hydraulic 82-2205 I/O 82-2138 O/O Long travel HEAVY TRACK Hydraulic 82-2296 I/O 82-2297 O/O FJ60 / HJ60 SERIES 10.85-90 Standard height HEAVY TRACK Hydraulic 82-2205 I/O 82-2272 O/O Long travel HEAVY TRACK Hydraulic 82-2296 I/O 82-2294 O/O FJ75 / HJ75 SERIES 84-90 Standard height HEAVY TRACK Hydraulic 82-2205 I/O 82-2272 O/O Long travel HEAVY TRACK Hydraulic 82-2296 I/O 82-2312 O/O See note 2 HZJ75 SERIES 90-99 Standard height HEAVY TRACK Hydraulic 82-2205 I/O 82-2312 O/O Long travel HEAVY TRACK Hydraulic 82-2296 I/O 82-2348SP1 O/O Long travel RAID Hydraulic 90-5461 I/O 90-5442 O/O HJ76, 78 SERIES Troopy 99- Standard height HEAVY TRACK Hydraulic 82-2347SP1 I/I 82-2312 O/O Standard height RAID Hydraulic 90-5440 I/I 90-5442 O/O 0-30mm (rear) Long travel HEAVY TRACK Hydraulic 82-2347 I/I 82-2348SP1 O/O 0-50mm (front) / 0-30mm (rear) Long travel RAID Hydraulic 90-5441 I/I 90-5442 O/O 0-50mm (front) / 0-30mm (rear) Long travel HEAVY TRACK Hydraulic 82-2348 O/O 0-50mm (rear) Long travel RAID Hydraulic 90-5371SP1 O/O 0-50mm (rear) HJ79 SERIES Tray 99- Standard height HEAVY TRACK Hydraulic 82-2347SP1 I/I 82-2312 O/O Standard height RAID Hydraulic 90-5440 I/I 90-5442 O/O 0-30mm (rear) Long travel HEAVY TRACK Hydraulic 82-2347 I/I 82-2348SP1 O/O 0-50mm (front) / 0-30mm (rear) Long travel RAID Hydraulic 90-5441 I/I 90-5442 O/O 0-50mm (front) / 0-30mm (rear) Long travel HEAVY TRACK Hydraulic 82-2348 O/O 0-50mm (rear) Long travel RAID Hydraulic 90-5371SP1 O/O 0-50mm (rear) FJ80 / HZJ80 / HDJ80 SERIES 08.91-03 Standard height HEAVY TRACK Hydraulic 82-2385SP1 I/I 82-2386SP1 I/O See note 3 Long travel HEAVY TRACK Hydraulic 82-2385 I/I 82-2386 I/O Long travel HEAVY TRACK Hydraulic 88-1688 I/I 88-1689 I/O Long travel RAID Hydraulic 90-5389SP2 I/I 90-5390SP2 I/O HZJ 105 SERIES 90-02 Standard height HEAVY TRACK Hydraulic 82-2385SP1 I/I 82-2386SP1 I/O Coil springs front & rear Long travel HEAVY TRACK Hydraulic 82-2385 I/I 82-2386 I/O Long travel HEAVY TRACK Hydraulic 88-1688 I/I 88-1689 I/O Long travel RAID Hydraulic 90-5389SP2 I/I 90-5390SP2 I/O HDJ100 / UDJ100 SERIES 98-07 Standard height HEAVY TRACK Gas-hydraulic 8240-1183SPX I/O 8240-1184SPX I/O Torsion bar front Long travel RAID Hydraulic 90-5397SP1 I/O 90-5398SP1 I/O See note 4 200 SERIES 08- Standard height HEAVY TRACK Hydraulic 88-1747 I/O 88-1748 I/O Long travel RAID Hydraulic 90-5447 I/O 90-5448 I/O See note 5 FJ CRUISER 06- Standard height HEAVY TRACK Hydraulic 82-2522 I/O 82-2523 I/O Long travel RAID Hydraulic 88-1712 I/O 90-5404L&R I/O See note 5 PRADO 90 SERIES 96-02 Standard height HEAVY TRACK Hydraulic 82-2446 I/O 82-2447 I/O Long travel RAID Hydraulic 88-1711 I/O 90-5394 I/O See note 5 www.toperformance.com.au 9

APPLICATION YEAR LENGTH RANGE TYPE FRONT FITTINGS REAR FITTINGS NOTES 120 / 150 SERIES 03- Standard height HEAVY TRACK Hydraulic 82-2522 I/O 82-2523 I/O Long travel RAID Hydraulic 88-1712 I/O 90-5404L&R I/O See note 5 RAV 4 RAV 4 / FUNCRUISER 94-12.97 Standard height HEAVY TRACK Gas-hydraulic/Gas 8641-1319 INSERT 30-1599 I/O Original Equip strut only (front) RAV4 01.98-08.00 Standard height HEAVY TRACK Gas-hydraulic/Gas 8641-1427 INSERT 30-1599 I/O Original Equip strut only (front) ZAC2 / ACA2 / CLA2 09.00-05 Standard height HEAVY TRACK Gas-hydraulic/Gas 8641-1427 INSERT 30-1599 I/O Original Equip strut only (front) 2.0 VVT-I, 2.2 D-4D 135 / 180 06-13 Standard height HEAVY TRACK Gas-hydraulic 8641-1511 INSERT 8240-1257 O/O Original Equip strut only (front) Standard height FSD Gas-hydraulic 2100-4084 Original Equip strut only (front) VOLKSWAGEN AMAROK AMAROK 09- Std & Long travel HEAVY TRACK Hydraulic 82-2595 I/[ 82-2596 O/O See note 5 TOUREG TOUREG 10.02-05.10 Standard height FSD Gas-hydraulic 2100-4078 Excl. air susp, VW Sport susp LONG travel shock absorbers are listed in BOLD print. LONG travel shock absorbers listed provide maximum 50mm lift, in some cases only cater for 30mm lift. Observe notes for more information. Note 1: Raising short wheel base vehicles can cause drive-line issues, and may require further modifications. Exercise caution when raising. Note 2: HJ 75 with raised rear suspension can be fitted with 82-2348SP1. This shock absorber will provide stiffer damping forces than normal replacement, and 20mm more open length. Note 3: Post- Sep/91, 80 series Landcruisers can be fitted with part numbers 82-2385 and 82-2386 provided longer coil springs are also fitted. Fitment of longer coils will raise the body of this vehicle 50-60mm, resulting in a greater ride height than pre- Sep/91 models. Note 4: Due to technical reasons, the torsion bar suspension on this vehicle prohibits the use of long travel shock absorbers. A maximum hub to guard dimension of 530 mm is strongly recommended. 90-5397SP1 is 11mm longer than standard (open length). Note 5: There are a number of technical reasons why independent front suspension 4WD s should not be raised. Dampers noted (note 5) are only slightly longer (0-30mm raise only). For more information, please contact: Toperformance Products - KONI Australia Phone: 03 9873 1722 Email: toper@toperformance.com.au Web: www.toperformance.com.au 10 FOUR WHEEL DRIVE SHOCK ABSORBERS

KONI ADJUSTABILITY Most KONI shock absorbers come with an ability to adjust the rebound forces to cater for general wear and tear of the unit over time, thereby extending the service life of the damper. Adjustment can be made to fine tune the damper to perform with higher spring rates and extra demands, a common scenario with many four wheel drive vehicles. REBOUND ADJUSTMENT FOR A TWIN TUBE KONI SHOCK ABSORBER: Series 80, 82, 86, 87, 88, 90, 8040, 8240 1. Remove the shock absorber from the vehicle and hold it vertically with the lower eye or pin attached in a vise. Use clamp plates to prevent damage. 2. Fully collapse the shock absorber, at the same time turning the dust cap or piston rod slowly to the left (counterclockwise), until it is felt that the cams of the adjustment nut engage in the recesses of the foot valve assembly. 3. Some shock absorbers include a bump rubber concealed under the dust cover and it must be removed prior to adjusting. 4. The damper may have already been adjusted. Therefore check whether the shock absorber is in the adjustment position or not by keeping it collapsed and gently turning it further to the left counting at the same time the half turns until a stop is felt. Stop turning then and do not use force. 5. Keeping the shock absorber collapsed, make 1 half turn (180 degrees) to the right (clockwise). In case of prior adjustment add the number of half the turns previously found. The total range is about 5 half turns. 6. Pull the shock absorber out vertically without turning for at least 1 cm to disengage the adjusting mechanism. The dust cap or piston rod may now be turned freely. Adjustment Direction: Clockwise: Firmer Counter Clockwise: Softer Rebound adjustable, the adjustment is made with the shock fully compressed. REBOUND ADJUSTMENT FOR A MONO TUBE KONI SHOCK ABSORBER: Series 26, 28, 30 1. Remove the dust cover and expose the adjusting button. 2. Hold the damper body by hand where the piston rod emerges from the cylinder. Push the button carefully, by hand, and hold it in that position. (Do not use any device, other than by hand to depress button). 3. The adjusting device has been provided with a number of clearly distinguishable stops (clicks), each of which marks an adjustment position (zero + 3 clicks = 4 positions). 4. The damper may have already been adjusted earlier. Therefore, check whether the shock absorber is in the adjustment position by turning the piston rod to the left (counterclockwise) with the other hand until the zero-stop is felt DO NOT USE FORCE! 5. To increase rebound, turn the piston rod one or more clicks to the right (clockwise), and release the adjusting button. 6. Be sure the adjusting button fully springs back into position. As long as the button is depressed, do not turn the piston rod further; otherwise correct adjustment will be disturbed. As soon as the button has made its complete return, the piston rod may be turned freely. 7. The damper can now be refitted. Adjustment Direction: Clockwise: Firmer Counter Clockwise: Softer Rebound adjustable, the adjustment is made with the shock fully extended. Twin-Tube Adjustment See on www.toperformance.com.au/ adjustment-guides Mono-Tube Adjustment See on www.toperformance.com.au/ adjustment-guides www.toperformance.com.au 11

EXPERIENCE CONTROL We looked for a fully hydraulic Shock Absorber with a large oil volume as we have learnt that an oil/oil unit normally has more oil and will run at lower temperatures than a similar rated gas/oil unit. The shocks also needed to have the option of being reconditioned when they did eventually begin to wear out hopefully some years down the track. KONI from Holland were our choice. KONI make exceptional quality gear, the Heavy Track RAID 90 Shock Absorbers have performed faultlessly for years and millions of corrugations while on our vehicle. There is not much else to say really, the gear works and works well. Mick Hutton Beadell Tours www.beadelltours.com.au 8 Trade Place, Vermont VIC 3133 Phone: 03 9873 1722 Email: toper@toperformance.com.au www.toperformance.com.au Toperformance Products is the sole Australian distributor of the world renowned KONI shock absorbers. Contact us today to upgrade your vehicle s suspension!