Positive Lock Receptacles

Positive Lock eceptacles Product Facts educed insertion force Locks onto tabs containing holes Housing insulates and serves as a removal tool Snap action tells assembler receptacle is mated properly Terminated by automatic or semi-automatic equipment Single and multiple circuit housings available ecognized under the Component Program of Underwriters Laboratories Inc., File Nos. E66717 and E28476 Certified by Canadian Standards ssociation File No. L7189 Positive Lock receptacles are specifically designed to provide ease of assembly and secure retention to mating tabs. These unique features are attainable by the reduced insertion force of the product and the locking dimple. The receptacle locks onto mating tabs containing holes and is removable only by deflecting an integrally designed depressor prior to withdrawal. The depressor can be deflected manually by thumb pressure, or automatically by a cam inside a specially designed nylon housing. If the housing is employed, removal of the terminal from the tab is performed by simply applying withdrawal force to the housing. In addition to providing a means of disconnecting the terminal, the housing performs its traditional insulating function. side from reduced insertion forces, Positive Lock receptacles give the assembler a definite mechanical snap when the terminal is correctly seated over the mating tab. This facilitates correct assembly in hard-to-reach areas such as under dashboards, recessed switch tabs, etc. Safety is enhanced by the locking capability of the product. Unless the depressor is deliberately deflected, either manually or by withdrawal force applied directly to the optional housing, a terminal will not easily come off of the tab. Thus, the potential of exposed live parts or disruption of critical circuitry due to improperly seated or accidentally removed terminals is greatly reduced. Positive Lock eceptacles evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 75

Positive Lock eceptacles (Continued) Mark I eceptacles Stock Thickness.016 [0.41] Fits Tab.032 [0.81] ecognized under the Component Program of Underwriters Laboratories Inc., UL File No. E28476 Wire ange Insulation Material WG Diameter and Finish 20-16 14-11 12-10.090-.130 2.29-3.30.135-.195 3.43-4.95.095-.155 2.41-3.94.140-.170 3.56-4.32.135-.200 3.43-5.08.291 [7.39] eceptacle.878 [22.30] s Quick Change pplicator No. 2 Hand Tool rass/pre-tin 1-160759-1 X X 567181-2 654174-1 rass/tin 63812-1 1 X X 680140-2 rass/tin 154718-3 X 466542-3 525651-1 rass/tin 154717-3 X 466883-2 525651-1 rass/pre-tin 790319-3 567417-2 1 Style Housing only. 2 Quick-Change pplicator for MP-O-LECTIC Machine 565435-5. For MPOMTO Machine and other machines not listed, contact TE. Positive Lock eceptacles eceptacle Housings Material 94 V-2, 6/6 Nylon.220 [5.59].357 [9.07] 1 Position.955 [24.26].387 [9.83].283 [7.19].214 [5.44].445 [11.30].430 [10.92].215 [5.46].434 [11.02].300 [7.62].354 [8.99] 1 [25.91].354 [8.99] C.960 [24.38] 2 Position.705 [17.91].362 [9.19].715 [18.16].354 [8.99] Style Color No. lack 154719-0 Natural 154719-1 lack 520961-1 1 C lack 520895-1 2 H lack 926521-2 T lack 926522-1 Natural 926522-2 1 Press-to-release with secondary lock. 2 Secondary lock..394 [10.01] H.957 [24.31].291 [7.39].596 [15.14].957 [24.31] T 76 Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686

Positive Lock eceptacles (Continued) Mark I Flag eceptacle Stock Thickness.016 [0.41] Fits Tab.032 [0.81].488 [12.40].291 [7.39].783 [19.89] Wire ange WG Insulation Diameter Material and Finish 20-15.087-.130 2.21-3.30 rass/pre-tin 926820-4 17-13.130-.170 3.00-4.30 rass/pre-tin 926790-4 Mark I eceptacle Housings Material 94 V-2, 6/6 Nylon.866 [22.00].591 [15.01] Positive Lock eceptacles.228 [5.79].319 [8.10] Color lack 926291-1.370 [9.40] Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 77

Positive Lock eceptacles (Continued) Straight eceptacles.300 [7.62].255 [6.48].055 Max. [1.40]... Positive Lock eceptacles Wire ange Tab Insulation Material Stock L Terminal WG Thickness Diameter and Finish Thickness (Overall Length) No. 22-18.032 0.81.059-.122 1.50-3.10 Pre-Tin rass.016 0.41.976 24.80 X X 170327-1.105-.210 18-16.032 2.67-5.33 or. rass.016.886 (2) 18, (2) 20 0.81 (2).105. 0.41 22.50 2.67 Max. 1742354-1 15-10 12-10 eceptacle Housings 1 Circuit.032 0.81.090-.155 2.29-3.94 rass.016 0.41.886 22.50.025.090-.155 rass,.016.886 0.64 2.29-3.94 Tin Plated 0.41 22.50.090-.155 rass,.016.886 2.29-3.94 Tin Plated 0.41 22.50.032 0.81.090-.135 2.29-3.43 Pre-Tin rass.016 0.41 1.015 25.80.032 0.81.110-.200 2.79-5.08 Pre-Tin rass.016 0.41 1.015 25.80.032.150-.200 rass,.018.913 0.81 3.81-5.08 Tin Plated 0.46 23.20.283 [7.20].354 [9.00].394 [10.00] 1.094 [27.80].327 [8.30].311 [7.90].354 [9.00].449 [11.40].315 [8.00] 1.094 [27.80].421 [10.70] X X 63097-2 X X 63809-1 X X 63442-1 X X 170328-1 X X 170329-1 X X 63239-1.063 [1.60] 78 Natural 172076-1 lack 172076-2 V2 Yellow 172076-4 Green 172076-5 lue 172076-6 6/6 Nylon ed 172076-7 Natural 2-172076-1 lack 2-172076-2 V0 Yellow 2-172076-4 Green 2-172076-5 lue 2-172076-6 ed 2-172076-7 Natural X X 177627-1 Yellow X X 177627-4 6/6 Nylon V0 Green 177627-5 lue 177627-6 ed 177627-7 lack 177627-9 Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686

Positive Lock eceptacles (Continued) eceptacle Housings 2 Circuit.380 [9.65].595 [15.11] 1.080 ef. [27.43].040 [1.02].595 [15.11].380 [9.65] 1.080 [27.43] ef..290 [7.37].290 ef. [7.37].362 [9.19] 1.135 ±.015 [28.83 ± 0.38].362 [9.19] 2 Plcs. 1.135 ±.015 [28.83 ± 0.38].958 [24.33].313 [7.95].354 [9.00].622 [15.80].433 [11.00].290 [7.36].598 [15.20].197 [5.00] 1.094 [27.80].488 [12.39].850 [9.07] 1.135 [28.83] C D Natural X X 520935-1 ed X X 520935-2 lack 520935-3 V2 Green 520935-4 6/6 Nylon lue 520935-5 Yellow 520935-6 rown 520935-7 Natural 1-520935-1 V0 ed 1-520935-2 lue 1-520935-5 6 Nylon V2 Natural 1-521229-1 1 Natural X X 521229-1 6/6 Nylon V0 ed 521229-2 C 6/6 Nylon V0 Natural 178833-1 D 6/6 Nylon V0 Natural X X 1969332-2 1 Housing material to IEC 60695-2-11 Glow Wire temps. 650 C, 750 C, & 850 C. Positive Lock eceptacles eceptacle Housings 4 Circuit.354 [9.00] 1.390 [35.30] 1.350 [34.20] 1.094 [27.80].433 [11.00] 6/6 Nylon V2 Natural X X 174429-1 Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 79

Positive Lock eceptacles (Continued) Flag eceptacles Stock Thickness.016 [0.41] Fits Tab.032 [0.81].307 [7.80].307 [7.80].653 [16.60] Wire ange Insulation Material Terminal WG Diameter and Finish No. 22-18 0.59-.110 1.50-2.80 Pre-Tin rass X X 172761-1.110-.205 2.80-5.20 Pre-Tin rass X X 172763-1 12-10.110-.205 2.80-5.20 Pre-Tin rass X X 172765-1 Positive Lock eceptacles Flag Style eceptacle Housing 1 Circuit.220 [5.60].748 [19.00].898 [22.80] V2 Natural X X 172469-1 6/6 Nylon Natural 1-172469-1 V0 lue 1-172469-2 80 Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686

Positive Lock eceptacles (Continued) 187 Series Straight eceptacles.220 [5.59].196 [4.98] L.220 [5.59].236 [5.99] L.030 Max. [0.76]... Wire ange WG Style Tab Fit Insulation Diameter Material and Finish Stock Thickness L (Overall Length) Terminal No..060-.105 1.52-2.67 Pre-Tin rass.850 21.60 X X 170324-1 24-20.060-.105 1.52-2.67 Phos. ronze, Nickel Plated.850 21.60 X X 170324-2.060-.105 1.52-2.67 Pre-Tin Phos. ronze.850 21.60 170324-5.060-.110 1.52-2.79 Pre-Tin rass.755 19.17 X X 63407-2 1.074-.134 1.87-3.40 Pre-Tin rass.850 21.60 X X 170325-1.074-.134 1.87-3.40 Pre-Tin Phos. ronze.850 21.60 170325-3 20-16.090-.130 2.29-3.30 rass, Pre-Tin.755 19.17 X X 63232-1 1.032 0.81.060-.110 1.52-2.79 rass, Tin Plated.740 18.80 X X 63498-1 2.032 0.81.090-.130 2.29-3.30 rass, Tin Plated.755 19.17 X X 63313-1 1.083-.142 2.11-3.61 rass,.850 (2) 18 (2).216 Pre-Tin 21.60 5.49 170326-1 1 Low profile not for use in housing. 2 For use with housing 521125. 187 Series eceptacle Housings 1 Circuit.201 [5.10].291 [7.40].331 [8.40].957 [24.30].290 [7.37].974 [24.74].367 [9.32].205 [5.21] Positive Lock eceptacles Use with (.187 x [4.74 x ]) Use with (.187 x.032 [4.75 x 0.81]) Note: ll part numbers are ohs compliant. Natural X X 172074-1 lack 172074-2 V2 Yellow 172074-4 Green 172074-5 lue 172074-6 6/6 Nylon ed 172074-7 Natural X X 173974-1 lack 173974-2 V0 Yellow 173974-4 Green 173974-5 lue 173974-6 ed 173974-7 6/6 Nylon V2 Natural 521125-1 evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 81

Positive Lock eceptacles (Continued) 187 Series eceptacle Housings 2 Circuit.299 [7.60].461 [11.70] 6 mm Pitch.200 [5.10] 1.028 [26.10].524 [13.30].087 [2.20].685 [17.40].512 [13.00].315 [8.00].522 [13.26] 6 mm Pitch, with Polarized Guide.279 [7.10].200 [5.10] 1.028 [26.10].299 [7.60].299 [7.60].500 [12.70].882 [22.40] C 7 mm Pitch.279 [7.10] 1.028 [26.10].563 [14.30].957 [24.30].957 [24.30] D 10 mm Pitch E 15 mm Pitch, for Electro-Magnetic Positive Lock eceptacles Natural 172210-1 Natural X X 175578-1 V2 lack 172210-2 V2 lack 175578-2 Yellow 172210-4 Natural 1-175578-1 lue 172210-6 C 6/6 Nylon lack 1-175578-2 6/6 Nylon Natural X X 1-172210-1 V0 Yellow 1-175578-4 lack X X 1-172210-2 lue 1-175578-6 V0 Yellow 1-172210-4 ed 1-175578-7 Green 1-172210-5 Natural 179720-1 lue 1-172210-6 lack 179720-2 ed 1-172210-7 D 6/6 Nylon V0 Yellow 179720-4 V2 Natural X X 174587-1 lue 179720-6 Natural 1-174587-1 ed 179720-7 Yellow 1-174587-4 Natural X X 176498-1 6/6 Nylon V0 Green 1-174587-5 lack 176498-2 E 6/6 Nylon V0 lue 1-174587-6 Yellow 176498-4 ed 1-174587-7 lue 176498-6 6 Nylon V2 Yellow 3-176498-4 1 1 Housing material to IEC 60695-2-11 Glow Wire temps. 650 C, 750 C, & 850 C..590 [15.00].921 [23.39].280 [7.11] 1.720 [43.70].378 [9.60].201 [5.11] F 16 mm Pitch.957 [24.31].520 [13.20].307 [7.80] G For Microswitch 1.035 [26.30] 82 Note: ll part numbers are ohs compliant. Yellow 353148-4 F 6/6 Nylon V0 Green 353148-5 lue 353148-6 V2 Natural X X 174712-1 G 6/6 Nylon Natural 1-174712-1 V0 lue 1-174712-6 ed 1-174712-7 evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686

Positive Lock eceptacles (Continued) 187 Series eceptacle Housings 3 Circuit and 4 Circuit.768 [19.50] 1.720 [43.70].307 [7.80] 1.035 [26.30].378 [9.60].291 [7.40].894 [22.70].953 [24.20].957 [24.30].034 [1.00].370 [9.40] 3 Circuit For Micro-Switch 4 Circuit For Timer Natural X X 172075-1 V2 Yellow X X 172075-4 6/6 Nylon lue 172075-6 V0 Natural 1-172075-1 Yellow 1-172075-4 6/6 Nylon V0 Natural X X 174513-1 Positive Lock EX 187 Series Straight eceptacles.228 [5.79] Wire ange WG Tab Thickness Insulation Diameter Material Stock Thickness L (Overall Length) Terminal No. 26-20 0.14-0.53 0.50.050-.140 1.3-3.6 Stainless Steel.675 17.2 175032-1 26-16 0.50-1.30 0.50.090-.140 2.3-3.6 Stainless Steel.675 17.2 X 1742669-1 20-14 0.50-2.20 0.50.075-.173 1.9-4.4 Stainless Steel.675 17.2 X 175034-1.248 [6.29] L Positive Lock eceptacles Positive Lock EX Straight eceptacles.300 [7.6].345 [8.8] L Wire ange Tab Insulation Material Stock L Terminal WG Thickness Diameter Thickness (Overall Length) No..032.085-.135 Stainless Steel.016.835 0.76-2.09 0.80 2.2-3.4 0.41 21.2 175164-1 Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 83

Positive Lock eceptacles (Continued) I eceptacles Stock Thickness.016 ccepts.032 Tab.300 [7.62].770 [19.56] Wire ange WG Insulation Diameter Material and Finish 22-18.060-.110 rass X X 63933-1 1.52-2.79 rass/tin X X 63933-2.090-.155 rass X X 63854-1 2.28-3.93 rass/tin X X 63854-2 16-12 or (2) 18 rass X X 1217092-1 or (2) 16 or.120-.170 3.04-4.31 (1) 18 and (1) 16 rass/tin X X 1217092-2 I eceptacle Housings.394 [10.00].576 [14.72].595 [15.11].960 [24.38].326 [8.28] Positive Lock eceptacles.260 [6.60].360 [9.14] One Circuit Housing.981 [24.92].595 [15.11].980 [24.89].960 [24.38].212 [5.38].370 [9.40].285 [7.24] Two Circuit Wax Motor Housing.980 [24.89] 1.500 [38.10] Two Circuit Water Valve Housing.370 [9.40] C.981 [24.92] 1.310 [33.27] Two Circuit Water Valve Housing with Latch D.536 [13.61] Two Circuit Housing E.981 [24.92] 84 Note: ll part numbers are ohs compliant. Style Material UL 94 1 Color 2 ccepts Nylon V2 Natural 521120-1 Positive Lock I X X Terminals. Nylon V0 Natural 521766-1 FSTON and Positive Lock I Terminals. Examples X X V2 Natural 521766-2 1 include 63306 and 63854. Natural 2-521253-1 1 V2 Natural 521253-1 X X D Nylon ed 521253-2 FSTON and X X ed 1-521253-2 Positive Lock I Terminals. X X V0 Green 1-521253-3 Examples Include 63306 and 63854 X X lue 1-521253-7 X X C Nylon V2 Natural 521119-1 X X E Nylon V0 Natural 521955-1 MK III Positive Lock eceptacles X X 63993, 63854, 1217092 1 Housing material to IEC 60695-2-11 Glow Wire temps. 650 C, 750 C, & 850 C. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686

Positive Lock eceptacles (Continued) I 187 Series eceptacles.102 [2.59].234 [5.94].248 [6.30].670 [17.02] Wire ange WG Insulation Dia. Mating Tab Thickness Material and Finish Terminal No. pplicator 22-18 Tin Plated.090-.130 rass 1217113-2 680645-2 2.29-3.30.032 Tin Plated 0.81 rass 1217097-2 680645-2 rass 1217114-1 680652-2.150-.200 3.81-5.08 Tin Plated 1217114-2 680652-2 rass (2) 18.150-.200 3.81-5.08.032 0.81 rass 1217096-1 X X 680652-2 I 187 Series eceptacle Housings.232 [5.89] 1.710 [43.43].795 [20.19].280 [7.11].175 [4.50].905 [22.99].315 [8.00].735 [18.67] 521187-1 521198-1 Material UL 94 Color Nylon V2 Natural X X 521187-1 Nylon V2 Natural X 521198-1.905 [22.99] Positive Lock eceptacles I HVC Motor eceptacle Housings.980 [24.89].980 [24.89] Material Color Nylon Natural X X 521780-1 Nylon Natural X X 521781-1 1.344 [34.38] 1.655 [42.04] Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686.400 [10.16] 521781-1 4-Position.400 [10.16] 521780-1 5-Position 85

Positive Lock eceptacles (Continued) 110 Series Straight eceptacles.071 [1.80].148 [3.75].236 [6.00].677 [17.20] Wire ange Tab Insulation Material Stock Terminal WG Fit Diameter and Finish Thickness No. 24-20.040-.070 1.02-1.78 Pre-Tin rass.010 0.25 175411-1 20-16.080-.122 2.03-3.10 Pre-Tin rass.010 0.25 174777-1 eceptacle Housing pplicable Contact 175411, 174777.197 [5.00].748 [19.00] [0.50].024 [0.60].275 [6.98].197 [5.00].582 [14.78] Positive Lock eceptacles.787.234 [5.95] Max. [20.00] For 1 Circuit.504 [12.80] For 3 Circuit 1.008 [25.60] 6/6 Nylon V2 Natural X X 174779-1 4/6 Nylon V2 lack 1969227-1 Tab Dimension For Signal Circuit For 1 Circuit Top View Ø.047 ±.004 [1.20 ± 0.10].138 Min. [3.50] 45.354 ±.005 [9.00 ± 0.13] ±.004 [0.50 ± 0.10].110 ±.005 [2.80 ± 0.13].063 ±.004 [1.60 ± 0.10] Side View 10 [] Type (When using tab shoulder for butting) Top View utting surface of housing Ø.047 ±.004 [1.20 ± 0.10] 45.354 ±.005 [9.00 ± 0.13] ±.004 [0.50 ± 0.10].110 ±.005 [2.80 ± 0.13].063 ±.004 [1.60 ± 0.10] Side View 10 [] Type (When using resin, etc., for butting) Sagging of the tab s hole must not exceed 0.08 mm. Housing rea Section X-X.003 Through Hole [0.08] Max..116 Min. [2.95].236.089 [6.00] [2.25] Min. Min. Housing Outline For 2 Circuit Ø.047 ±.004 [1.2 ± 0.1] Hole.138 Min. [3.5].219 ±.003 [5.55 ± 0.08].367 [9.33] Min. Clearance.280 ±.004 [7.1 ± 0.1].280 ±.004 [7.1 ± 0.1].110 ±.005 [2.8 ± 0.13] 86 Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686

Positive Lock ST 5 Connector System Product Facts Mates with.250 x.032 [6.35 x 0.81] tabs built on 5 mm centerlines Keying and polarization features Utilizes Positive Lock I eceptacles Terminals available for 22-18 WG, WG single wire or 18-16 WG double wire applications Plain brass and tin plated terminals available ecognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards ssociation File No. L7189 The Positive Lock ST 5 connector system has been designed to mate with a control, switch or printed circuit board that has.250 x.032 [6.35 x 0.81] thick tabs built on 5 mm centerlines. This system utilizes our popular Positive Lock Mark III eceptacles and a series of housings to provide customers with a reliable solution to their wire management needs. This line of connectors offers keying and polarization features built into the housings that eliminate mismating and crossed wires. Two through eight circuit housings facilitate improved assembly operations and the Positive Lock Terminal provides excellent retention of the connector. The acronym ST 5 in the title is a reference to the European design standard for appliance wiring and component design, aster nschluss Steck Technik 5 mm. This standard outlines a system of keying, polarization and latching that is popular in Europe and other parts of the world. The Positive Lock ST 5 system has been designed to mate with many of the components built with a ST 5 standard interface. This system is an excellent way for OEMs or their subcontractors to use existing lead makers and termination equipment to produce connectors that mate to controls with ST interfaces. While the origins of this product are in the appliance industry, many other industries are embracing this style of connector. Marine, exercise equipment and hand tool manufacturers are recent examples of customers beginning to use this system. ny application where.250 x.032 [6.35 x 0.81] tabs are built on 5 mm centerlines is a potential candidate for this popular connector system. Positive Lock ST 5 Connector System See TE catalog 296599 for additional ST products. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 87

Positive Lock ST 5 Connector System (Continued) I eceptacles Stock Thickness.013 [0.33] Tab size.032 [0.81].300 [7.62].293 [7.44].771 [19.58] Wire ange WG ID Material and Finish pplicator No. 22-18.060-.110 rass 1217378-1 X X 1852165-2 1.52-2.79 Tin Plated rass 1217378-2 X X 1852165-2.090-.155 2.29-3.94 rass 1217094-1 X X 680653-2 (2) 18.190 4.83 Max.. Tin Plated rass 1217094-2 X X 680653-2 16-12.120-.170 3.04-4.32 rass 1217095-1 X X 680654-2 (2) 18 (2).120 3.05 Max.. (2) 16 (2).120 3.05 Max.. Tin Plated rass 1217095-2 X X 680654-2 Positive Lock ST 5 Connector System eceptacle Housings Material 94 V-0, 6/6 Nylon.786 [19.96] Max..500 [12.70] ef..362 [9.20] Max..792 [20.12] ef..980 ±.015 [24.89 ± 0.38] Standard Version locked Circuit Version Description Standard Version 4 locked Circuit Version 5 2 Position X X 521204 3 Position X X 521205 521782 4 Position X X 521206 521295 5 Position X X 521207 521267 6 Position X X 521208 521435 7 Position X X 521209 521935 8 Position X X 521210 9 Position X X 521746 521936 10 Position X X 521792 521836 11 Position X X 521699 1969335 Notes: 1. ll part numbers are ohs compliant. 2. Housing base part number provided. 3. Standard colors are natural and blue. 4. Keying patterns determined by part dash number. efer to the customer drawing for pattern options. 5. locking patterns determined by part dash number. efer to the customer drawing for pattern options. 88 Note: ll part numbers are ohs compliant. evised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. m.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686

Mouser Electronics uthorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 174779-1