cp tech customised product technology Product Catalogue
CONTENTS 1. How to Measure a Postural Insert 2. Insert Components - Back and Base - Cushions - Lateral Supports - Head Supports - Pommels - Foot Support - Straps - Trays 16. Contour Technology - CT Carved Foam Cushions - CT Shell 20. Contact CONTOUR TECHNOLOGY PRODUCTS CT Shell Fully customised shell to provide optimal support for clients with decreased centralised tone/postural control or requiring more rigid limiting of scoliosis. Evolight lining Supracor lining EVA Lining Foam Lining CT Shell For temperature control Temperature control Pressure relief CT Shell back with CT Carved foam base OPTIONS FOR CT SHELL Covers Supersheen Covers Newcare Covers Dartex Aesthetic triangle pattern. Available in various colours (provided with black base and sides) black, purple, red, burnt orange (pictured left on a flat base cushion), turquoise and royal blue. Available in various colours Black, maroon, bottle green and navy Some water proofing properties Available in black Platalon Silicon Similar to strong plastic Heat sealed around foam cushion Silicon coating over foam cushion 2 CP TECH PRODUCT CATALOGUE 19 CP TECH PRODUCT CATALOGUE
CONTOUR TECHNOLOGY PRODUCTS CT Carved Foam Cushion Fully customised foam cushion to provide optimal support for clients with complex needs. HOW TO MEASURE A POSTURAL SEATING INSERT Measuring the client A Shoulder width B Shoulder height C Seat depth CT Carved Foam Base Cushion CT Carved Foam Back Cushion CT Carved Foam Set (Back and base cushion) OPTIONS FOR CT CARVED FOAM CUSHION D E F G H J Chest width Pelvic width Knee width Medial knee width Chest Depth Knee to heel Back box with sides PVC or Wood Measuring the Insert Covers Supersheen Aesthetic triangle pattern. Available in various colours (provided with black base and sides) black, purple, red, burnt orange (pictured left on a flat base cushion), turquoise and royal blue. K L M N Insert Width Insert Height Insert Depth Thoracic Support Width Covers Newcare Available in various colours Black, maroon, bottle green and navy P Q R S Pelvic Support Width Lateral Support Height H- Harness Shoulder Width Offset Leg Length Discrepancy Covers Dartex T Back Cushion Thickness Some water proofing properties Available in black U V Base Cushion Thickness Insert Back/Base Angle Platalon Silicon Similar to strong plastic Heat sealed around foam cushion Silicon coating over foam cushion Still not sure? For more information about how to measure a Postural Seating Insert, please see the How to Measure a Postural Seating Insert page on the CP Tech website (www.cptech.com.au). 18 CP TECH PRODUCT CATALOGUE 3 CP TECH PRODUCT CATALOGUE
INSERT COMPONENTS - BACK AND BASE THE CONTOUR TECHNOLOGY PROCESS Flat Back Board (PVC) 6mm PVC 10mm PVC Can be moulded/ bent Available in grey Easy to clean Flat Base Board (PVC) 6mm PVC 10mm PVC Can be moulded/ bent Available in grey Easy to clean Adjustable slots for lateral supports Simple linear insert. Used where seated position is correctable and/or requires support to maintain functional position with appropriate postural supports and straps. Can be used in combination with CT foam cushions for clients requiring more support/pressure relief. 1. Assessment - The client is positioned in our fitting chair. A mould is made with bean bags of the clients shape. The mould is scanned by our 3D scanner. 2. Editing - The digital image capture by the 3D scanner is edited in our specialised software packages. Flat Black Board (Plywood) 12mm plywood Strong, light weight material Requires painting Flat Base Board (Plywood) 12mm plywood Strong, light weight material Requires painting Adjustable slots for lateral supports Simple linear insert. Used where seated position is correctable and/or requires support to maintain functional position with appropriate postural supports and straps. Can be used in combination with CT foam cushions for clients requiring more support/pressure relief. 3. Robot Carve (Foam only) - The edited image is sent to our Kuka robot which machines the desired shape out of a foam block. Moulded Back (PVC) 6mm PVC 10mm PVC Can be moulded/ bent Available in grey Easy to clean Height custom Moulded section - Adjustable slots for lateral supports Simple linear insert encourages shoulder protraction. 4. Finished Product - The machined CT insert is covered and mounted onto a wheelchair. 4 CP TECH PRODUCT CATALOGUE 17 CP TECH PRODUCT CATALOGUE
CONTOUR TECHNOLOGY INSERT COMPONENTS - CUSHIONS Contour Technology or CT is a world first process that uses state of the art technology to develop equipment that is tailor made to fit a person's body shape. Using this technology a range of products are able to be custom made. Specific products that are currently available include: Contour Technology Insert a custom contoured postural support Flat Back Cushion Height custom Foam depth 25mm, 50mm or 75mm T-back I-back Simple linear postural support system where support and/or minimal correction are required. seat that is moulded to the person s body shape. Sleep System a custom moulded foam support that moulds around the person's body. Flat Base Cushion Sit Smart Chair a custom moulded school chair. ised commode a shower commode that is custom moulded to suit the person's body shape. Height custom Foam Height 25mm, 50mm or 75mm Used to accommodate fixed positions or where minimal correction is achievable. The advantages of CT An accurate, customised, contoured Moulded Back (for Moulded PVC Back) system is made for each individual Provides optimal postural control Able to accommodate postural deformity Contoured shape maximises : Width and Height As per Moulded PVC Back Foam Depth 50mm Simple linear insert, encourages shoulder protraction. pressure distribution Enhanced comfort Increased function Lightweight (CT Shell only) Strong Unobtrusive Cushion hand carved to specific client dimensions. Shape and size will vary. Contoured (hand carved) back or base : Height custom Height custom Complex postural support system to provide additional support and accommodate fixed postural positions. Also used for pressure relief. 16 CP TECH PRODUCT CATALOGUE 5 CP TECH PRODUCT CATALOGUE
INSERT COMPONENTS - CUSHIONS CONT. INSERT COMPONENTS - STRAPS Antithrust Base Front Rebond foam with 8mm Enduro foam comfort overlay Back - Enduro Foam Ramped Cushion Rebond Foam Depth custom Antithrust height 50, 75 or 100mm Back of cushion 25 50mm lower than antithrust : Depth custom Height 25mm, 50mm or 75mm Rebond foam for additional stability Used to address extensor thrust and posterior pelvic tilt. Used to address extensor thrust and posterior pelvic tilt (less aggressive then antithrust) Wrist cuff - sheepskin Bilateral wrist cuffs joined with a 25mm tether Ankle wraps (pair) Oxford : Small Medium Large Sheepskin Sheepskin To maintain upper limb in midline position, whilst sill allowing for movement. Cuffs the heel and ankle to promote a neutral foot position and to limit lower limb extension. Please note: CP Tech straps are used for the purposes of positioning. They are not to be used as a restraint or for transport. Leg Channels (pictured with antithrust cushion) or Rebond Foam with comfort overlay Lumbar Roll : Promote optimal hip positioning for excessive adduction. Also used for excessive abduction. Rebond foam provides firm support. To accommodate a hyperlordotic spine or to promote a natural lumber curve. INSERT COMPONENTS - TRAYS Tray PVC Clear PVC or Grey PVC Stainless steel brackets Tray - Poly Carbonate : (mm) Small W460 x D500 Large W560 x D600 25mm Enduro foam and vinyl Upstands For use during activities of daily living. May also promote an upright trunk and head position. Clear poly carbonate Stainless steel brackets : Small W460 x D500 Large W560 x D600 25mm Enduro foam and vinyl For use during activities of daily living. May also promote an upright trunk and head position. Provides additional strength for heavy users 6 CP TECH PRODUCT CATALOGUE 15 CP TECH PRODUCT CATALOGUE
INSERT COMPONENTS - STRAPS INSERT COMPONENTS - CUSHIONS CONT. Chest strap Thigh/Knee strap 25mm, 50mm or 100mm Wrist strap Secured to the wheelchair armrest. : : : D-ring and velcro or sheepskin D-ring and velcro Attached between the thoracics. Used as a prompt to promote upright trunk position. To limit internal rotation at the hip. To provide upper limb stability and/or limit excessive shoulder external rotation and abduction. Sacral Wedge Hillock or Rebond Foam : Options for Cushions To promote a more neutral or anterior pelvic position. Requires a mobile pelvis. Promote hips in abduction in presence of mild adductor tone. Rebond foam provides firm support. Ankle strap : Calf Strap - anterior or posterior 50mm : D-ring and velcro Sheepskin Fastex buckle to split strap for transfer To provide support at the ankle and/or limit lower limb extension. Attach to the footbox or footplate To maintain feet on the footplates (to stop feet falling off the back of the footplates) Covers Supersheen Covers Newcare Covers Dartex Aesthetic triangle pattern. Available in various colours (provided with black base and sides) black, purple, red, burnt orange (pictured left on a flat base cushion), turquoise and royal blue. Available in various colours Black, maroon, bottle green and navy Some water proofing properties Available in black Hippy shoe strap (x2) 25mm Secured to hippy shoe D-ring and velcro To promote neutral foot position Platalon Silicon Similar to strong plastic Heat sealed around foam cushion Silicon coating over foam cushion 14 CP TECH PRODUCT CATALOGUE 7 CP TECH PRODUCT CATALOGUE
INSERT COMPONENTS - LATERALS INSERT COMPONENTS - STRAPS Thoracics Stainless Steel Bracket (fixed or swing away) PVC 6mm thoracic As per specifications below Flat (pictured with fixed bracket) Length (mm) Small 155 Medium 180 Large 210 Depth (mm) Small 85 Medium 100 Large 120 Fixed Swing Away Felt Lined EVA Lined Gel Anterior Curved (pictured with Swing Away bracket) Length (mm) Small 180 Medium 215 Large 250 Depth (mm) Small 80 Medium 100 Large 120 Posterior Curved (pictured with fixed bracket) Length (mm) Small 145 Medium 170 Large 200 Pelvic/Hip Block Fixed Stainless Steel Bracket 6mm PVC pelvic/ hip block Depth (mm) Small 85 Medium 100 Large 120 (mm) Length - Depth Small 155-85 Medium 180-100 Large 210-120 XLarge 230-125 Felt Lined EVA Lined Gel To provide trunk support and promote a symmetrical position To promote a symmetric pelvic position Pelvic strap - Bodypoint 4 point BodyPoint Pelvic Strap Pelvic strap CP Tech (shown with Pelvic strap Pad) : (hip width) Medium - 23cm 38cm Large - 33cm 48cm Dimension s (hip width) Medium - 23cm 38cm Large - 33cm 48cm /Options Webbing/Buckle (mm) Small 25/25 Medium 38/25 Large 38/25 XLarge 50/38 Commode 50/50 Pelvic strap - neoprene adjustable H-harness standard Padding : : Strap length mm XSmall 260 Small 350 Medium 410 Large 480 XLarge 550 H-harness - peg feed/boomerang Padding Small 350 Medium 410 Large 480 XLarge 550 H- harness made to the client s specific dimensions. H- harness made to the client s specific dimensions. To provide additional support for extensor thrust and sliding under the strap To control extensor thrust and maintain pelvic position To control extensor thrust and maintain pelvic position To promote upright trunk position To promote upright trunk position. Shaped to avoid contact with peg site. May also be a more comfortable option for female clients. 8 CP TECH PRODUCT CATALOGUE 13 CP TECH PRODUCT CATALOGUE
INSERT COMPONENTS - FOOT SUPPORTS INSERT COMPONENTS - LATERALS Footbox Plain Lateral Thigh Block PVC Footbox Padded PVC EVA Padding Supracor Padding Hippy Shoes Side Supports Side Supports Supracor Padding To provide foot support To provide foot support Fixed Stainless Steel Bracket 6-8mm PVC thigh block Lined EVA foam Medial Thigh Block Fixed Stainless Steel Bracket 6-8mm PVC thigh block Rebond Gel EVA foam Rebond Gel EVA foam To limit excessive hip abduction Maintain hip in abducted position. Bilateral blocks can be used as a pommel alternative. PVC or Wood (to the clients shoe size and shape) Variety of straps may be attached To provide individual foot support and control foot position Options for Laterals Fixed bracket INSERT COMPONENTS - STRAPS Swing Away Brackets To assist with transfers Groin strap - pair D-ring and velcro To control pelvic rotation Cover Felt Lining Elastic/stretchable, wetsuit like material. Pelvic strap - Bodypoint 2 point BodyPoint Pelvic Strap (hip width) XSmall - 13cm 23cm Small - 18cm 28cm Medium - 23cm 38cm Large - 33cm 48cm To control extensor thrust and maintain pelvic position EVA Lining Gel Padding 12 CP TECH PRODUCT CATALOGUE 9 CP TECH PRODUCT CATALOGUE
INSERT COMPONENTS - HEAD SUPPORTS INSERT COMPONENTS - POMMELS CP Tech is able to offer a variety of head support shapes and sizes ranging from: Removable Pommel Glide headrest provides minimal support CP Tech Standard headrest with occipital support CP Tech Complex shapes CT headrest specifically shaped to the clients head to provide optimal support. (uses Contour Technology) Glide Headrest (bracket and pad) CP Tech Complex Headrest pad Stainless Steel Bracket with push pin button Pommel Rebond foam lined with 8mm Enduro foam comfort overlay To assist with transfers. Cover - Reversed Dartex Used reverse side up for low friction Wipe clean Cover - Satin Lycra Less friction then reversed dartex Wipe clean Assists with reducing hair rubbing off Cover - Kelso OPTIONS FOR HEAD SUPPORTS INSERT COMPONENTS - POMMELS Covers Supersheen Flip Down (Freedom Bracket) Freedom Flip Down Bracket Pommel - Rebond foam pommel lined with with 8mm Enduro foam comfort overlay OPTIONS FOR POMMELS Alternative to assist with transfers. Pommel swings down under insert base. Aesthetic triangle pattern. Available in various colours (provided with black base and sides) black, purple, red, burnt orange (pictured left on a flat base cushion), turquoise and royal blue Fixed Pommel Stainless Steel Bracket Pommel Rebond foam with 8mm Enduro foam comfort overlay To maintain position of hip abduction. Covers Newcare Covers Dartex Available in various colours Black, maroon, bottle green and navy Some water proofing properties Available in black Platalon Similar to strong plastic Heat sealed around foam cushion Silicon Silicon coating over foam cushion 10 CP TECH PRODUCT CATALOGUE 11 CP TECH PRODUCT CATALOGUE
CONTACT US Please contact CP Tech on the details below for more information about Any of the products listed in this catalogue How to submit a quote request How to make an appointment CP Tech is located at Ability Centre The Sir David Brand Centre Taxi Stand 2 106 Bradford Street Coolbinia WA 6050 Postal Address CP Tech Ability Centre PO Box 61 Mount Lawley WA 6929 Website www.cptech.com.au Email General enquiries/quote requests cptech@tccp.com.au Production production@cptech.com.au Telephone Reception (08) 9443 0210 Workshop (08) 9443 0541 Workshop Repairs (08) 9443 0509 CP TECH PRODUCT CATALOGUE