AE Threaded Combination and Non-Combination Full Motor Starters Units Provide Disconnecting Means and Undervoltage, Circuit and Motor Running Protection. Class I, Division and, Groups C, D Class II, Division and, Groups E, F, G Applications AE series threaded type combination and non-combination motor starters are used in areas where hazardous materials are handled or stored. These units provide disconnecting means, undervoltage protection, circuit protection and motor running protection. Full voltage across the line starting and stopping of squirrel cage induction motors. Remote starting and stopping motor as needed. Features Cast on slotted mounting feet. Ground lug package and installation instructions for termination of ground wires. Reset operator with stainless steel shaft. Breaker handles can be locked in the ON or OFF position (combination starters only). Drilled and tapped outlets. Standard outlets are determined by motor starter size. Outlets for remote control wiring. Plugged / outlets top and bottom for breather and drain. Three plugged / NPSM outlets drilled and tapped for needed lights or switches. Ample space is provided for installation and wiring of additional accessories. Painted removable pan. Enclosures are designed to accept GE, Square D and Cutler-Hammer motor starters. For other brands contact your local representative. Cutler-Hammer furnished standard unless otherwise specified. Motor circuit protectors are available on combination starters. Enclosures furnished with or without components. Readily accessible circuit breaker mounted outside the center housing. Rated for NEMA X (gray epoxy-coated inside and outside). Acme screw type square threads designed to prevent seizing. Bell threads are located inside the housing protects against damage or contaminants. Standard Materials Housings: copperfree (/ of %) aluminum Shaft, bushings and exposed hardware: stainless steel Standard Finishes Housings: epoxy - coated inside and outside Options See modifications page. NEC Certifications and Compliances UL Standards: UL 8, UL 698, UL UL Classified: E877 Exterior Interior GE is a registered trademark of General Electric Company. Square D is a registered trademark of Schneider Electric. Cutler-Hammer is a registered trademark of Eaton Corporation. Visit our website at www.appletonelec.com or contact us at (8) 6-6. April 6
AE Threaded Combination and Non-Combination Full Motor Starters Units Provide Disconnecting Means and Undervoltage, Circuit and Motor Running Protection. Controls Class I, Division and, Groups C, D Class II, Division and, Groups E, F, G NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION MOTOR STARTERS Catalog Numbering Guide AE T M 8 NEC Certified Explosionproof Motor Starter Enclosure: AE - Combination Full AES - Full NEMA Size: Breaker Type: M - Magnetic Only T - Thermal Magnetic Line : - 8-8 6-6 Breaker Trip: - Amps 7-7 Amps - Amps - Amps - Amps - Amps - Amps - Amps - Amps - Amps - Amps 7-7 Amps - Amps - Amps - Amps - Amps Suffix for Other Options/Features: See Modifications Enclosure Type: T - Threaded Horsepower: - - - - 7-7. - - - - - - - 6-6 7-7 - - - - - 6 Visit our website at www.appletonelec.com or contact us at (8) 6-6. April
AE Threaded Combination/Non-Combination Full Motor Starter Modifications Threaded Enclosure. -Phase, 6 Hertz, Nonreversing. Class I, Division and, Groups C, D Class II, Division and, Groups E, F, G Suffix Factory Installed Catalog Number Field Installed Description Operators Start/Stop dual push button SX AEPDGRE Stop push button SX AEPRC Start push button SX AEPGA Stop, lighted PB, red Vac LPX AEPTRE Start, lighted PB, green Vac LPX AEPTGE position selector switch specify legend AX AESSMN position selector switch specify legend AX AESSML Red pilot light, Vac L AEPLR Green pilot light, Vac L AEPLG Red pilot light, Vac L AEPLR Green pilot light, Vac L AEPLG Red pilot light, 8 Vac L AEPLR Green pilot light, 8 Vac L AEPLG NEMA X Breather/Drain Fittings Drain fitting DN DRNBX Breather fitting (Drilled and tapped installation included.) BR BRTBX Control Power Options Fused CPT, Vac T AFCPT Fused CPT, Vac T AFCPT Fused CPT, Vac T AFCPT Fused CPT, Vac T AFCPT Fused CPT, Vac w/interposing Relay T AFCPTR Fused CPT, Vac T6 AFCPT Fused CPT, Vac T7 AFCPT Fused CPT, Vac T8 AFCPT Fused CPT, 7 Vac T9 AFCPT7 Separate control fused circuit S-V N/A Specify starter coil voltage S-V N/A S-8V N/A Description Nameplates Engraved nameplate black letters on white surface,.8 x.6 mm ( x ),.8 mm (. ) letters, lines max. specify legend Suffix Factory Installed NP Catalog Number Field Installed n/a Overload Heater Provide FLA at the time of order. W enclosure space heaters Vac O-V AFA7X Vac O-V AFA7X 8 Vac O-8V AFA7X Control Terminal Blocks (Above points contact your local representative) Amp, 6 Vac 8 point 8K N/A NEMA B w/wire markers point K N/A Interrupt Ratings k AIC standard. Contact your local representative for higher interrupt capacities. Cutler-Hammer Starter Auxiliary Contacts Size - NO/NC XC AJ- NO/NC XC AJ- ( ea.) NO/NC XC A6D9G8 Size NO/NC XC A6D9G8 ( ea.) Square D Starter Auxiliary Contacts Size - NO/NC XS A999SX8 NO/NC XS A999SX8 ( ea.) NOTE: CPT includes primary and secondary fuses. Add L to part no. for Size starters. Size and Vac Max. Size and Vac Max. Contact your local representative for other voltages. 8 Aux. Contacts Max. includes one seal-in and seven added. Aux. Contacts Max. includes one seal-in and three added. Size - includes one seal-in and four added. Size - includes one seal-in and three added. Cutler-Hammer is a registered trademark of Eaton Corporation. Square D is a registered trademark of Schneider Electric. Visit our website at www.appletonelec.com or contact us at (8) 6-6. April 6
AE Threaded Combination Full Motor Starters With Thermal Magnetic Breakers Threaded Enclosure. -Phase, 6 Hertz, Nonreversing. Controls Class I, Division and, Groups C, D Class II, Division and, Groups E, F, G NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION MOTOR STARTERS Line 8 6 Conduit Sizes Loc. A, B, C and D Horsepower NEMA Size Breaker Amps Catalog Numbers Weight kg (lb) Standard Mounting Hardware Set Catalog Number AETT- AETT- (7) -/ -/ AETT- 7-/ AETT-7 (7) -/ -/ AETT- AETT- () -/ -/ AETT- AETT- 7 () -/ 7 AETT-7 AETT- 9 () -/ -/ 6 AETT-6 7 AETT-7 () AMH AETT- AETT-8 AETT-8 (7) -/ -/ 7-/ AETT-87 (7) -/ -/ AETT-8 AETT-8 7 AETT-87 () -/ -/ AETT-8 7 () -/ 6 AETT-86 7 AETT-87 9 () -/ -/ AETT-8 AMH AETT-8 AETT-8 () AMH AETT-8 AETT-6 (7) -/ -/ 7-/ AETT-67 AETT-6 (7) -/ -/ AETT-6 () -/ -/ AETT-6 7 AETT-67 AETT-6 7 () -/ 7 AETT-67 AETT-6 9 () -/ -/ AETT-6 () AETT-6 6 () AMH To complete the catalog number please add the appropriate suffix for other options/features. Suffixes, see AE Threaded Combination and Non-Combination Full Motor Starter Modifications. 6 Visit our website at www.appletonelec.com or contact us at (8) 6-6. April
AE Threaded Combination Full Motor Starters With Magnetic Breakers Threaded Enclosure. -Phase, 6 Hertz, Nonreversing. Class I, Division and, Groups C, D Class II, Division and, Groups E, F, G Line 8 6 Conduit Sizes Loc. A, B, C and D Horsepower NEMA Size Breaker Amps Catalog Numbers Weight kg (lb) Standard Mounting Hardware Set Catalog Number 7 AETM-7 AETM- (7) -/ -/ 7 AETM-7 (7) -/ -/ AETM- () -/ -/ AETM- 7 () -/ AETM- 7 () -/ -/ AETM- () AMH AETM-8 7 AETM-87 (7) -/ -/ AETM-8 7 AETM-87 (7) -/ -/ AETM-8 AETM-8 AETM-8 () -/ -/ AETM-8 7 () AETM-8 -/ AETM-8 7 () -/ -/ AETM-8 () AMH AETM-6 7 AETM-67 (7) -/ -/ AETM-6 7 AETM-67 AETM-6 (7) -/ -/ AETM-6 () -/ -/ AETM-6 AETM-6 AETM-6 7 () -/ 6 AETM-66 AETM-6 7 () -/ -/ AETM-6 () AETM-6 AMH To complete the catalog number please add the appropriate suffix for other options/features. Suffixes, see AE Threaded Combination and Non-Combination Full Motor Starter Modifications. Visit our website at www.appletonelec.com or contact us at (8) 6-6. April 6
AE Threaded Full Motor Starters Threaded Enclosure. -Phase, 6 Hertz, Nonreversing. Controls Class I, Division and, Groups C, D Class II, Division and, Groups E, F, G NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION MOTOR STARTERS Line 8 6 Aluminum Conduit Sizes Loc. A, B, C and D Horsepower NEMA Size Catalog Numbers Weight kg (lb) Standard Mounting Hardware Set Catalog Number AEST- (6) -/ -/ 7-/ AEST-7 (6) -/ -/ AEST- 8 () -/ -/ AEST- () -/ AEST- () -/ -/ AEST- 6 () AMH AEST-8 (6) -/ -/ AEST-8 (6) -/ -/ AEST-8 8 () -/ -/ AEST-8 () -/ AEST-8 () -/ -/ AEST-8 6 () AMH AEST-6 (6) -/ -/ AEST-6 (6) -/ -/ AEST-6 8 () -/ -/ AEST-6 () -/ AEST-6 () -/ -/ AEST-6 6 () AMH To complete the catalog number please add the appropriate suffix for other options/features. Suffixes, see AE Threaded Combination and Non-Combination Full Motor Starter Modifications. 66 Visit our website at www.appletonelec.com or contact us at (8) 6-6. April
AE Threaded Combination/Non-Combination Full Motor Starter Threaded Enclosure. -Phase, 6 Hertz, Nonreversing. Dimensions in Millimeters Dimensions are approximate, not for construction Dimensions AET and AEST AET and AEST AET and AEST AET and AEST AET and AEST AET and AEST E 7. (.6) 7. (.6). (.88) 9.8 (.8) 9.8 (.8) 98.6 (9.) F 66. (6.) 66. (6.) 77.7 (.). (9.). (9.) 8.9 (.) G 87. (.) 87. (.) 88.9 (9.). (.). (.) 7.8 (7.7) H. (8.). (8.). (8.). (8.). (8.) J.6 (.7).6 (.7).6 (.7).6 (.7).6 (.7) K 6.6 (.8) 6.6 (.8). (.) 9. (7.) 9. (7.) 8.7 (.) L 9. (.7) 9. (.7) 9. (.7) 9. (.7) 9. (.7) 6. (.7) M 6.9 (.6) 6.9 (.6) 6.9 (.6). (.) N 9. (7.) 9. (7.) 9. (7.) 96.8 (7.7) 66.7 (.) 6. (6.) P 79. (.) 79. (.) 7. (8.) 8. (.) 8. (.). (.6) Q 8.6 (7.) 8.6 (7.) 8. (9.8) 9. (8.6) 9. (8.6) 89. (.8) R. (.6). (.6) 69.8 (.7) 76. (.) 76. (.) 7. (.) S.8 (.) T 6. (6.) Approximate Weight in Kilograms (Pounds) For Enclosure Only AET AET AET AET AET AET 7. (6) 7. (6). () 9. () 9. () 9. () AEST AEST AEST AEST AEST AEST 7. (6) 7. (6).7 (9). (). () 87.7 (9) Visit our website at www.appletonelec.com or contact us at (8) 6-6. April 67