WHEEL LOADERS INTEGRATED TOOL CARRIERS PART B Caterpillar Performance Handbook Edition 44 8.437.4228 www.hawthornecat.com 214 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, Caterpillar Yellow, the Power Edge trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Wheel Loaders Machine/Attachment Selection MACHINE/ATTACHMENT SELECTION The Integrated Toolcarrier s versatility and the wide range of attachments makes the single machine fleet concept highly attractive to an increasing number of users. A Job Analysis helps identify applications, work require ments, material handling parameters and the cur rent working method. Thoroughly research each ele ment in the following chart, the gathered infor mation will help select the proper Integrated Tool carrier System. MATERIALS HANDLED? JOB ANALYSIS METHOD WORK PROCESSES? CURRENT EQUIPMENT? APPROPRIATE INTEGRATED TOOLCARRIER MODEL SIZE NECESSARY ATTACHMENTS UTILIZATION & SEQUENCE? PRINCIPAL WORK Work Processes: The first step in the job analysis is to identify all work processes from start to finish. Key questions outlined below will begin to indicate the required attachments and potential Integrated Toolcarrier applications. What kinds of work are performed: (e.g., dozing, loading, stacking, digging, sweeping, handling special materials, etc.)... in site preparation?... below ground level?... at ground level?... above ground level?... in landscaping?... in maintenance equipment yard? etc. What work is done manually that could be done with an Integrated Toolcarrier? What are the work conditions?:... underfoot?... grades?... tight quarters?... time restraints?... climate? etc. Materials Handled: Examining the materials handled will assist in determining necessary attachments. Sizes and weights of mate rial(s) handled will indicate the appropriate Integrated Toolcarrier model by defining lift and reach require ments. Concentrate on the material flow at the job site the point of origin as well as the final destina tion for the various materials will undoubtedly have material handling requirements. What kinds of materials are handled (e.g. snow, earth, bricks, chemicals, pipe, logs, etc.) What form are the materials handled in: bulk? palletized? How much does each weigh? What are the dimensions of each? What are the... movement parameters:... dozed what distance?... load and carried what distance?... lifted how high?... placed below ground level?... placed what distance from machine? 23-228 Edition 44
Machine/Attachment Selection Wheel Loaders Current Equipment: If determining material weight is not possible, much information can be determined from looking at the current equipment fleet. This will suggest required perfor mance capabilities such as lifting capacity. Machines currently doing the work (e.g. wheel loaders, lift trucks, sweepers, light capacity cranes, snow plows, etc.)? What special (maximum) capabilities does each machine have (production, lift height, load capacity, width/height dimensions, reach, turning radius, travel speed, etc.)? To what extent are each machine s maximum capabilities used? What are owning/operating costs of each? Utilization & Sequence: Utilization implies how often the current machines are used and what will be the utilization factors for the Integrated Toolcarrier with each individual attach ment. Sequence implies what order these tasks are accom plished in and if two or more machines operate at the same time. This portion of the job analysis should assist in compar ing economies of various systems. Other important con sid erations may be the number of operators needed, storage space, reduced maintenance requirements, etc. How often (what percent) is each machine used? How often and when does it sit idle? How often and when do two or more machines work at the same time? Can the operation be changed to permit single machine operation? Principal Work: Utilization and sequence will indicate the principal work the Integrated Toolcarrier will do, further assisting in attachment and model sizing and selection. The basic machine/tool package should be able to handle the toughest, most frequently performed jobs for the primary application. Secondary tools can have a little more give and take in their performance capabilities than the primary tool. What work can be accomplished by an Integrated Toolcarrier? What work will take up the majority of Integrated Toolcarrier time? What work will use the maximum static tipping capabilities of the Integrated Toolcarrier? What high cost (owning and operating) and/or low utilization machines can be replaced by an Inte grated Toolcarrier? Additional Tips for Tool Sizing and Selection Tool selection will principally concern hydraulic power requirements and static tipping load considerations. The standard tools offered by Caterpillar can be used on any Integrated Toolcarrier machine with little difficulty. However, tools such as the hydraulic broom, claws, blades and asphalt cutter will require additional consideration before proposing a system to the customer. Fork Rating Table indicates rated pallet fork load at standard ma chine configuration, 6 mm (24") load center, 12 mm (3'11") fork on IT14G2-93H, see operator manual to determine rated load for vehicle configuration being used. Model kg lb Model kg lb IT14G2 187 4123 93K High Lift 2476 5459 924K Standard 2864 6313 938K Standard 3765 8297 924K High Lift 2284 535 938K High Lift 2941 6483 93K Standard 3251 7165 23 Edition 44 23-229
Wheel Loaders Machine/Attachment Selection Bucket Rating Bucket capacity, SAE J742 FEB85 (nominally heaped) Table indicates rated load at vehicle configuration noted by the asterisks. See operator manual to determine rated load for vehicle configuration being used. 1.4 m 3 (1.75 yd 3 ) with Bolt-on Cutting Edge IT14G2* 2273 kg 5 lb 1.3 m 3 (1.7 yd 3 ) with Bolt-on Cutting Edge 91K 2145 kg 473 lb 1.5 m 3 (2. yd 3 ) with Bolt-on Cutting Edge 914K 239 kg 5269 lb 1.9 m 3 (2.5 yd 3 ) with Bolt-on Cutting Edge 924K*** Standard 371 kg 8179 lb 924K*** High Lift 2946 kg 6494 lb 2.1 m 3 (2.7 yd 3 ) with Bolt-on Cutting Edge 924K*** Standard 3671 kg 893 lb 924K*** High Lift 2725 kg 68 lb 2.1 m 3 (2.7 yd 3 ) with Bolt-on Cutting Edge 93K**** Standard 4185 kg 9226 lb 93K**** High Lift 2959 kg 6523 lb 2.3 m 3 (3. yd 3 ) with Bolt-on Cutting Edge 93K**** Standard 4146 kg 914 lb 93K**** High Lift 292 kg 6437 lb 2.5 m 3 (3.3 yd 3 ) with Bolt-on Cutting Edge 938K**** Standard 4764 kg 1,53 lb 938K**** High Lift 3451 kg 768 lb 2.7 m 3 (3.5 yd 3 ) with Bolt-on Cutting Edge 938K**** Standard 4719 kg 1,44 lb 938K**** High Lift 4589 kg 1,117 lb **** Specifications shown are for high-speed version IT14G2 and include lubri cants, full fuel tank, ROPS cab, 8 kg (176 lb) operator, standard 25 kg (55 lb) counterweight and 17.5-R25 (L-2 equivalent) tires. **** Specifications shown include lubricants, full fuel tank, limited slip axles, heavy duty rear brakes, optional counterweights, additional guarding, ROPS cab with A/C, 8 kg (176 lb) operator and 2.5-R25 (L-3) tires. **** Specifications shown include lubricants, full fuel tank, standard counterweights, additional guarding, 8 kg (176 lb) operator, and 2.5 R25 (L-3) XHA2 tires. **** Specifications shown include lubricants, full fuel tank, heavy counterweights, additional guarding, 8 kg (176 lb) operator, and 2.5 R25 (L-3) XHA2 tires. The charts explain each machine s maximum payload. The maximum material density would be determined by dividing the payload by the bucket capacity. If the actual material density exceeds the recommended material density, the process should be repeated to select the properly sized bucket. A similar procedure would be used with the forks and material handling arm to determine maximum rec ommended lifting capacity and/or required IT model size. Pallet Fork The pallet fork will fulfill many material handling needs. A modified Class 3 fork carriage provides visibility to the tines for precision pallet work. This carriage with non-standard spacing accepts many Class 3 lift truck attachments. Pallet fork rated operating loads are based on the following: SAE J1197 FEB91: 5% of the full turn static tipping load or the hydraulic/structural limitations. CEN 474-3 (European standard): 6% of the full static tipping load on rough terrain or the hydraulic/ struc tural limitations. 8% of the full turn static tipping load on firm, level ground or the structural/hydraulic limitation. Other local, regional or international guidelines may also apply. If operation is on rough ground these criteria may need modification. In this instance, the size and rating of existing equipment should be considered. Sizing for pallet work generally consists of answering the following questions. 1. What are the average loaded pallet dimensions? 2. Lift Capacity what capacity is required to lift and move the average pallet load? The maximum pallet load? 3. Lift Height can the machine reach the top level of the standard pallet stack? What are the maxi mum reach, lift and height requirements? 4. Maneuverability can the machine work around the current aisle configuration? In the stacking aisles? Main aisles? Intersecting aisles? Are 9 turns required in any aisle for material placement? 5. Length what tine length is required to fit the commonly used pallets? (1219 mm [4'"] tines are standard length for most palletized material.) 6. Any machine height restrictions? 7. Any special fork configurations required? Lift capacity, lift height, aisle configuration and tine length are the most important considerations in recommending a pallet handling machine. 23-23 Edition 44
Machine/Attachment Selection Wheel Loaders Example problem: The following example applies the job analysis method to a work situation. Sewer & Water Contractor Sets water lines (152 mm-61 mm [6 in-24 in] iron pipe), sanitary sewer lines (152 mm-457 mm [6 in-18 in] PVC) and storm sewer lines (61 mm-167 mm [24 in- 42 in] concrete pipe) primarily in urban areas... oftentimes across or down existing streets. Materials Loam/Clay: 16 kg/m 3 (27 lb/yd 3 ) loose density Bedding (Gravel): Water Pipe: Storm Sewer: 19 kg/m 3 (32 lb/yd 3 ) loose density 61 mm (24 in) push-on joint ductile iron, 6.1 m (2 ft) sections, 139 kg (2885 lb) 215 kg/m (144.3 lb/ft) 6.1 m (2 ft). 167 mm (42 in), Wall B, concrete pipe, 1.5 m (5 ft) sections, 1556 kg (343 lb) 121 kg/m (686 lb/ft 5 ft). Manhole Boxes: 1361 kg (3 lb) WHAT INTEGRATED TOOLCARRIER MODEL SHOULD BE RECOMMENDED? WHICH ATTACHMENTS? Integrated Toolcarrier Work Processes Attachment Possibilities Bundled PVC and Forks/Material individual concrete/iron Handling Arm pipe-loaded/unloaded (yardsite) and strung along trench Unload, handle, set Material Handling Arm manhole boxes Excess excavated material Bucket truck loaded Bedding material handled/ Bucket placed Trench backfilled Bucket/Blade Trench compaction Compactor Wheel Rough and finish grading Bucket/Blade Street cleanup Bucket/Broom Pavement removal Rebar Snips/Asphalt Cutter Current Equipment Utilization Cat 225............................. 9% Champ CB67 lift truck, 3175 kg (7 lb) capacity............. 15% Deere 444 with 1.1 m 3 (1.5 yd 3 ) G.P. bucket......................... 6% Rosco D-5 sweeper............. one half hour/day Rammax 1361 kg (3 lb) self-propelled trench compactor.................... 25% Machine sizing 135 mm (53 in) Forks Operating Load at Full Turn* Model kg lb IT14G2 181 5991 924K Standard 2781 6131 924K High Lift 2224 493 93K Standard 3158 6962 93K High Lift 2414 5322 938K Standard 3661 871 938K High Lift 2869 6325 Water pipes: 139 kg (2885 lb) IT14G2... 1 pipe no problem 924K Standard... 1 pipe no problem 924K High Lift... 1 pipe no problem 93K... 1 pipe no problem 93K High Lift... 1 pipe no problem 938K... 1 pipe no problem 938K High Lift... 1 pipe no problem Storm sewer pipes: 1556 kg (343 lb) IT14G2... 1 pipe no problem 924K Standard... 1 pipe no problem 924K High Lift... 1 pipe no problem 93K... 1 pipe no problem 93K High Lift... 1 pipe no problem 938K... 1 pipe no problem 938K High Lift... 1 pipe no problem * Note that the most conservative operating load (SAE J1197 FEB91) is used here. The rated operating load for some competitive machines with pallet forks will be based upon European standard CEN 474-3, assuming operation on firm and level ground (i.e. using 8% of full turn static tipping load). 23 Edition 44 23-231
Wheel Loaders Machine/Attachment Selection Performance Series Buckets Move More Material with the Same Rated Capacity More material can be moved with a Performance Series Bucket compared to a same-size rated capacity current bucket. Likewise, a smaller Performance Series Bucket can be utilized to move the same amount of material as a larger rated capacity current bucket. Carries More Productive Bucket shape and strike plane angle are designed for material retention and consistent load sizes. More material loads into the bucket and is carried all the way to the truck, hopper or stockpile. A spill guard diverts overflow away from hinge pins, lift arms, hydraulic cylinders and tilt sensors help ing to protect these areas of the machine. Performance Series Buckets utilize a system-based approach to balance bucket shape against the machine s linkage, weight, lift and tilt capacities. The result is a bucket optimized for performance and productivity, and intended for use in production applications. Performance Series Buckets for Wheel Loaders are designed for use in truck loading, stockpiling and load-and-carry applications. Per formance is improved over current buckets in these production applications with materials such as sand, gravel and aggregates. Loads Easy Proven design characteristics improve material flow into the bucket and improve material retention during transport. In some situations, the number of passes required to fill a truck is reduced. Performance Series Buckets are designed for optimum performance on the machine. Profile changes (over current buckets) improve loadabil ity and make Performance Series Buckets machinespecific. Fuel Efficient Performance Series Buckets have a longer floor easily digging through the pile. Less time in the pile equals less fuel consumed. Higher Fill Factors When comparing buckets of the same rated capacity, Performance Series Buckets have higher fill factors up to 115%. Bucket Specifications Performance Series Buckets are designed to bring optimum performance to a specific machine. Profile changes over current buckets allow higher fill factors and increased production. Incompatibility on the 95H and 962H The recent linkage change on the 95K and 962K has created some incompatibility issues with the Fusion Per formance Series Buckets. Because the bucket shape has been optimized for the machine linkage, Fusion Performance Series Buckets designed for use on the 95K and 962K will experience interference with the linkage on the 95H and 962H. For this reason 95K and 962K Performance Series Buckets should NOT be used on the 95H and 962H machines. Incompatibility on the 966H/K/M Because 972H/K/M Performance Series Buckets are designed specifically for performance on the 972H/K/M their shape brings some incompatibilities with the 966H/K/M machine. These buckets can be pinned on to the 966H, but will experience interference with machine linkage in the rack back position. For this reason, 972H/K/M Performance Series Buckets should not be used on 966H/K/M machines. This is different than current General Purpose Buckets. 23-232 Edition 44
Machine/Attachment Selection Wheel Loaders Certain Bucket Sizes Require Additional Counterweight Compared to a current bucket of the same rated capacity, Performance Series Buckets will move more material. To maintain appropriate machine stability, 98H machines utilizing the two larger Performance Series Buckets must be equipped with the aggregate loader counterweight. This is required for machine stability based on the bucket size/fill factor combination. Compatible with G and G II machines Performance Series Buckets for 988-size machines are compatible with standard and high lift linkages on G and G II Series machines. Material Handling Arm (MHA) The rated load for the MHA is 5% of the full turn static tipping load in each position or hydraulic or structural limitations. Manually extendable telescopic sections enable maximum lifting capacity at the full retracted position, and maximum lift height and reach in the fully extended position. Operating Load at Full Turn Model Retracted Mid Extended IT14G2 137 kg 167 kg 8888 kg 321 lb 2373 lb 1958 lb 924K Standard Hook On 924K High Lift Hook On 93K Standard Hook On 93K High Lift Hook On 938K Standard Hook On 938K High Lift Hook On 193 kg 1614 kg 141 kg 4148 lb 3518 lb 355 lb 168 kg 1386 kg 1218 kg 3545 lb 356 lb 2685 lb 2158 kg 183 kg 1589 kg 5188 lb 434 lb 352 lb 1763 kg 1525 kg 1343 kg 3886 lb 3361 lb 2961 lb 2737 kg 2134 kg 1855 kg 632 lb 472 lb 488 lb 291 kg 188 kg 1593 kg 468 lb 3986 lb 3512 lb Storm sewer pipes: 1556 kg (343 lb) IT14G2... no 924K... yes in retracted and mid 93K... yes in retracted, mid, and extended 938K... yes in retracted, mid, and extended Manhole boxes: 1361 kg (3 lb) IT14G2... no 924K... yes in retracted and mid 93K... yes in retracted, mid, and extended 938K... yes in retracted, mid, and extended Buckets All general purpose buckets are interchangeable on 924K-938K due to common attachment points on the quick couplers. Bucket selection will depend on the material density in your application. Offering multiple sized buckets allows the user the flexibility to closely match material density and bucket size with machine capa bility. Equipping a machine with too large a bucket will result in unacceptable stability too small a bucket may provide inadequate tire coverage. Bucket 178 kg/m 3 (3 lb/yd 3 )... 1% fill factor 23 Edition 44 23-233
Wheel Loaders Machine/Attachment Selection Model Bucket Payload 5% Full Turn Static Tipping 924K* Hook On 1.9 m 3 3382 kg 371 kg 2.5 yd 3 7456 lb 8179 lb 2.1 m 3 3738 kg 3671 kg 2.7 yd 3 8241 lb 893 lb 2.3 m 3 494 kg 3634 kg 3. yd 3 926 lb 812 lb 93K* Hook On 2.1 m 3 3738 kg 4185 kg 2.7 yd 3 8241 lb 9226 lb 2.3 m 3 494 kg 4146 kg 3. yd 3 926 lb 914 lb 2.5 m 3 445 kg 477 kg 3.3 yd 3 9811 lb 8988 lb 938K* Hook On 2.5 m 3 445 kg 4764 kg 3.3 yd 3 9811 lb 1,53 lb 2.7 m 3 486 kg 472 kg 3.5 yd 3 1,595 lb 1,46 lb 2.9 m 3 5162 kg 4684 kg 3.8 yd 3 11,38 lb 1,326 lb Machine/Attachment Recommendation 93K The greater static tipping load capabilities allow it to do a greater portion of the contractor s total work processes. With the following attach ments, the 93K could replace part or all of the specialty units, such as the wheel loader, rough terrain lift truck, street sweeper, and/or the trench compactor. 2.1 m 3 (2.75 yd 3 ), 2.3 m 3 (3. yd 3 ), or 2.5 m 3 (3.25 yd 3 ) General Purpose Bucket 135 mm (53 in) forks (handles all pipes) Material Handling Arm (handles pipe sizes under 167 mm (42 in) concrete and manhole boxes... 225 would have to set 1219 mm (48 in) and larger concrete pipe Broom Optional Attachments to Consider: 24-LH compactor wheel Rebar snips Asphalt cutter NOTE: Metric numbers are a product of conversion. **924K, 93K, and 938K equipped with Michelin 2.5-R25 XHA2 tires. **924H and 93H equipped with Michelin 2.5-R25 XHA tires. 23-234 Edition 44
Buckets Americas North Wheel Loaders Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 924K Fusion General Purpose Performance Series 255 1 1.9-2.5 2.5-3.2 775-963 175-2119 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1161-152 2554-3311 J25/BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 BOCE Side Dump 315 122 1.9 2.5 1653 3644 BOCE Included Pin On High Dump 255-36 1-12 3.-5. 4.-6.5 1688-2123 3721-468 BOCE Included Grapple 2697 16 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J25/BOCE Waste 359 12 3.6-3.8 4.7-5. 1416-1474 3122-325 BOCE Included Woodchip 333 131 4.9-5.3 6.4-6.9 1717-1775 3785-3913 BOCE Included Grading 27 16 1.9 2.5 1233 2716 BOCE Included General Purpose Performance Series 255 1 1.9-2.2 2.5-3. 812-157 1786-233 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 196-1383 2416-343 J25/BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1695-2149 3737-4738 BOCE Included Sand and Gravel 275 18 2.6-3.2 3.4-4.1 126-1147 2262-2523 Doze 2743 18 5.5 4.2 156 3321 BOCE Load & Carry 2743 18 6. 4.6 1528 3369 BOCE 93K Fusion General Purpose Performance Series 255 1 1.9-2.5 2.5-3.2 775-963 175-2119 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1161-152 2554-3311 J25/BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 BOCE Side Dump 315 122 1.9 2.5 1653 3644 BOCE Included Pin On High Dump 255-36 1-12 3.-5. 4.-6.5 1688-2123 3721-468 BOCE Included Grapple 2697 16 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J25/BOCE Waste 359 12 3.6-3.8 4.7-5. 1416-1474 3122-325 BOCE Included Woodchip 333 131 4.9-5.3 6.4-6.9 1717-1775 3785-3913 BOCE Included Grading 27 16 1.9 2.5 1233 2716 BOCE Included General Purpose Performance Series 255 1 1.8-2.5 2.5-3.2 812-979 1786-2154 J25/BOCE Sand and Gravel 275 18 2.6-3.2 3.4-4.1 126-1147 2262-2523 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 196-1383 2416-343 J25/BOCE High Dump 255-36 1-12 3.-3.5 4.-6.5 1695-2149 3737-4738 BOCE Included Doze 2743 18 5.5 4.2 156 3321 BOCE Load & Carry 2743 18 6. 4.6 1528 3369 BOCE 23 Edition 44 23-235
Wheel Loaders Buckets Americas North Model Interface Bucket Type 938K Fusion General Purpose Performance Series 95K 962K Pin On Fusion Pin On Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 255-275 GET 1-18 2.5-2.9 3.2-3.8 961-142 2118-2292 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 175-136 237-2992 J25/BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 BOCE Side Dump 315 122 1.9 2.5 1653 3644 BOCE Included High Dump 36 12 4.1-5. 5.4-6.5 241-2123 45-468 BOCE Included Grapple 2697 16 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J25/BOCE Waste 359 12 4. 5.2 1547 341 BOCE Included Woodchip 333 131 5.5 7.2 1795 3957 BOCE Included Grading 27 16 1.9 2.5 1233 2716 BOCE Included General Purpose Performance Series 255-275 1-18 2.4-2.8 3.2-3.8 968-159 2134-233 J25/BOCE Sand and Gravel 275 18 2.7-3.2 3.5-4.1 175-1146 2365-2521 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1178-1378 2596-338 BOCE Included High Dump 36 12 4.1-5. 5.4-6.5 265-2147 4553-4733 BOCE Included Doze 2927 115 6. 4.6 1854 488 BOCE Load & Carry 2927 115 6.75 5.2 1927 4249 BOCE General Purpose Performance Series 2894 114 2.7-3.8 3.5-5. 1367-1633 314-36 K8/BOCE Material Handling Performance Series 2894 114 2.7-3.8 3.5-5. 1373-165 327-3638 K8/BOCE Rock Performance Series 2969 117 2.7-3.2 3.5-4.25 1992-27 4711-4893 K9 Multi-Purpose 2943 116 2.9 3.75 287 461 BOCE Included Side Dump 322 127 2.9 3.75 2348 5177 BOCE Included High Dump 291 115 4.6-6.1 6.-8. 2672-2784 5891-6139 BOCE Included Grapple 359 12 4.6 6. 2824 6226 BOCE Included Waste 359 12 5.2-6.1 6.75-8. 2115-2285 4663-538 BOCE Included Woodchip 333 131 9.2-9.9 12.-13. 2371-2466 5227-5437 BOCE Included General Purpose Performance Series 2894 114 2.7-3.8 3.5-5. 1472-1778 3245-392 K8/BOCE Material Handling Performance Series 2894 114 2.7-3.8 3.5-5. 1495-1787 3296-394 K8/BOCE Rock Performance Series 2969 117 2.9-3.2 3.75-4.25 1992-27 4711-4893 K9 Multi-Purpose 2943 116 2.9 3.75 299 4628 BOCE Included Side Dump 3226 127 2.9 3.75 2455 5413 BOCE Included High Dump 291 115 4.6-6.1 6.-8. 2697-2812 5947-621 BOCE Included Grapple 359 12 4.6 6. 2925 6449 BOCE Included Waste 359 12 5.2-6.1 6.5-8. 225-2425 496-5346 BOCE Included Woodchip 333 131 9.2-9.9 12.-13. 2418-2516 5331-5547 BOCE Included Doze 359 121 6.75 5.2 2273 512 BOCE Load & Carry 359 121 8. 6.1 261 5755 BOCE 23-236 Edition 44
Buckets Americas North Wheel Loaders Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 966K Fusion General Purpose 966M Performance Series 321 126 3.8-4.6 5.-6. 1965-2143 4332-4721 K9/BOCE Material Handling Performance Series 321 126 4.-4.8 5.2-6.3 268-2254 4559-4969 K9/BOCE Coal Performance Series 3447 136 7.1 9.25 2865 6316 BOCE Included Rock Performance Series 3255 128 3.4 4.5 284 4595 K9 Multi Purpose 322 127 3.1 4. 2785 614 BOCE Included Side Dump 3677 145 3.6 4.75 2832 6243 BOCE Included High Dump 359 12 5.4 7. 2862 631 BOCE Included Grapple 348 12 3.8 5. 438 9656 K9 Waste 3323 131 6.5 8.5 2569 5664 BOCE Included Woodchip 3943 155 9.9 13. 2543 566 BOCE Included Doze 3357 132 8.5 6.5 314 6844 BOCE Included Load & Carry 3357 132 9.75 7.5 3311 731 BOCE Included Pin On General Purpose Performance Series 321 126 3.8-4.6 5.-6. 2112-226 4656-4982 K9/BOCE Material Handling Performance Series 321 126 4.-4.8 5.25-6.25 2173-235 4791-5181 K9/BOCE Coal Performance Series 3447 136 7.1 9.25 2795 6162 BOCE Included Rock Performance Series 3255 128 3.2-3.4 4.25-4.5 2362 527 K9 Heavy Duty Rock 3251 128 3.6-4. 4.75-5.25 2371-2751 5227-665 J35/K9 Multi Purpose 3226 127 3.1 4. 2721 5999 K9 Side Dump 3677 145 3.6 4.75 2858 631 BOCE Included Waste 3357 132 6.5 8.5 2925 6449 BOCE Included Woodchip 3327-3937 131-155 8.-9.9 1.5-13. 2474-2543 5455-5542 BOCE Included 23 Edition 44 23-237
Wheel Loaders Buckets Americas North Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 972K Fusion General Purpose 972M Performance Series 321 126 4.2-5. 5.5-6.5 226-2233 4467-4923 K9/BOCE Material Handling Performance Series 321 126 5.2 6.75 2274 513 K9/BOCE Coal Performance Series 3447 136 7.1 9.25 3199 753 BOCE Included Rock Performance Series 3255 128 3.6 4.75 279 4583 K9 Multi Purpose 322 127 3.1 4. 2785 614 BOCE Included Side Dump 3677 145 3.6 4.75 2832 6243 BOCE Included High Dump 359 12 5.4 7. 2862 631 BOCE Included Grapple 348 12 3.8 5. 438 9656 K9 Waste 3323 131 6.5 8.5 2569 5664 BOCE Included Woodchip 3943 155 9.9 13. 2543 566 BOCE Included Doze 3357 132 8.5 6.5 314 6844 BOCE Included Load & Carry 3357 132 9.75 7.5 3311 731 BOCE Included Pin On General Purpose Performance Series 3193 126 4.2-5. 5.5-6.5 2214-2383 4881-5254 K9/BOCE Material Handling Performance Series 3193 126 4.6-5.2 6.-6.75 2269-2389 52-5276 K9/BOCE Coal Performance Series 3447 136 7.1 9.25 323 761 BOCE Included Rock Performance Series 3255 128 3.6-4. 4.75-5.25 225-2397 496-5284 K9 Heavy Duty Rock 3251 128 3.6-4. 4.75-5.25 2371-2751 5227-665 J35/K9 Multi Purpose 3226 127 3.1 4. 2721 5999 K9 Side Dump 3677 145 3.6 4.75 2858 631 BOCE Included Waste 3357 132 6.5 8.5 2925 6449 BOCE Included 966K 972K Woodchip 3327-3937 131-155 8.-9.9 1.5-13. 2474-2543 5455-5542 BOCE Included Slag 325 128 3.4 4.5 4145 9138 K1 Fusion Multi-Purpose 322 127 2.9-3.1 3.75-4. 2892 6375 BOCE Included Side Dump 3677 145 3.4-3.6 4.5-4.75 2832 6243 BOCE Included High Dump 359 12 5.-5.4 6.5-7. 294 642 BOCE Included Grapple 348 12 3.2-3.6 4.25-4.75 438 9656 K9 Waste 3357 132 6.2-6.5 8.1-8.5 2569 5664 BOCE Included Woodchip 3937 155 9.6-9.9 12.5-13. 2543 566 BOCE Included Pin On Heavy Duty Rock 3251 125 3.4-4. 4.5-5.25 2425-2949 5346-651 K9/J35 Multi-Purpose 322 127 2.9-3.1 3.75-4. 286 6185 BOCE Included Side Dump 3677 145 3.4-3.6 4.5-4.75 2836 6252 BOCE Included Waste 3357 132 5.7-6. 7.5-7.85 2837 6255 BOCE Included Woodchip 3327-3937 131-155 7.6-9.9 1.-13. 2474-2514 5455-5542 BOCE Included 23-238 Edition 44
Buckets Americas North Wheel Loaders Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 98K Pin On General Purpose Performance Series 345 134 5.4-6. 7.-7.85 2674-2853 5895-629 K9/BOCE Material Handling Performance Series 345 134 5.7 7.5 2882 6354 K9/BOCE Coal Performance Series 3638 143 8.2 1.75 3663 875 BOCE Included Rock Performance Series 3495 138 4.4 5.75 2925 6448 K9 Heavy Duty Quarry Rock 355-3568 138-14 4.4-4.6 5.75-6. 336-3686 7288-8125 BOCE Included Waste 3886 153 9.8 12.75 398 8615 BOCE Included Woodchip 4166 164 11.5 15. 3887 857 BOCE Included Doze 3882 153 13. 9.9 421 9283 BOCE Included Load & Carry 3882 153 14. 1.7 4438 9786 BOCE Included Slag 3394 134 3.8 5. 532 11,689 K13 986H Pin On Rock 3772 148.5 5.4-6.1 7-8 3692-397 8139-8693 K11 988K Pin On General Purpose Performance Series 3855 152 6.9-8.4 9.-11. 4539-4994 1,7-11,1 K11 Rock Performance Series 42 158 6.4-7.7 8.3-1. 488-5263 1,759-11,63 K13 Heavy Duty Rock Performance Series 48 161 6.4 8.3 636 14,21 K13 Heavy Duty Granite Performance Series 3986 157 6.4 8.3 7433 16,385 K13 Serrated Edge Rock 3968 156 6.4-6.9 8.3-9. 5455-5634 12,26-12,421 Iron Ore 3922 154 4.7 6.2 5771 12,723 K13 Coal Slag 412-445 39-432 162-175 11.5-14.5 15.-19. 623-7 13,278-15,4 BOCE Included 154-159 5.4-6.4 7.-8.3 7633-8454 16,828-18,638 J6/Serrated Edge 23 Edition 44 23-239
Wheel Loaders Buckets Americas North Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 988H Pin On General Purpose Performance Series 396 156 6.9-7.7 9.-1. 263-5384 11,138-11,845 K11/BOCE General Purpose 386 152 7.7 1. 4895 1,773 BOCE Included Rock Performance Series 42 158 6.4-7.7 8.3-1. 4944-5324 1,877-11,713 K13 Rock 398 157 7.7 1. 4452 9812 K11 Heavy Duty Rock Performance Series 48 161 6.4 8.3 6348 13,966 K13 Heavy Duty Granite 398 157 6.4 8.33 7648 16,826 K13 Slag Coal 3866-397 412-445 152-156 5.3-6.4 7.-8.33 72-7653 15,84-16,837 K13/J6/ Weld-on edge 162-175 11.5-14.5 15.-19. 591-7 13,3-15,4 BOCE Included Coal Seam 381 15 6.8 8.5 445 979 J46/BOCE Iron Ore 394 155 4.4 5.75 5475 12,7 K13 Serrated Edge Rock 397 156 6.9 9. 479 1,54 N/A 99H Pin On Rock Performance Series 461 182 8.6-1. 11.25-13. 7247-7497 15,977-16,528 K13 Heavy Duty Rock Performance Series 467 184 8.6 11.25 898 19,798 K13 Heavy Duty Granite Performance Series 4634 182 8.6 11.25 11 451 25,245 K15 N/A = Not Applicable Slag 445-45 175-177 8.5-9.2 11.2-12. 9149-9613 2,127-21,149 Weld-on edge included Coal 437 172 13.4 17.5 746 16,41 BOCE Included Iron Ore 445 175 7. 9.2 8525 18,75 K15 Serrated Edge Rock 461 182 9.5 12.4 814 17,91 N/A 23-24 Edition 44
Buckets Americas North Wheel Loaders Model Interface Bucket Type 992K Pin On Rock Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 4824-4884 GET 19-192 1.7-12.2 14.-16. 9382-1 574 2,684-23,262 K15/K17 Heavy Duty Rock 568 2 1.7 14. 11 56 25,485 K17 High Abrasion Rock 568 2 1.7 14. 11 927 26,295 K15 Heavy Duty Granite 5165 23 1.7 14. 13 72 3,247 K15 Coal 617 243 19. 25. 12 54 27,56 BOCE Included Iron Ore 49 193 9. 11.8 11 172 24,577 K15 Serrated Edge Rock 4824 19 12.3 16. 1 282 22,62 N/A 993K Pin On Rock 568 2 12.2-14.5 16.-19. 12 864-14 29 28,31-31,26 K17 High Abrasion Rock 516 23 12.2-13. 16.-17. 15 25-15 456 33,451-34,4 K17 Heavy Duty Granite 516 23 13. 17. 17 418 38,32 K17 Coal 63 248 23. 31. 17 673 38,88 K17 Iron Ore 516 23 1. 13. 14 63 3,94 K17 Serrated Edge Rock 58 2 15. 19.5 13 915 3,615 N/A 994H Pin On N/A = Not Applicable Rock Coal 565-622 622-63 222-245 14.9-19.1 19.5-25. 19 32-21 777 42,465-47,99 J8 245-248 31.3-35.9 41.-47. 22 211-23 598 48,864-51,916 J7/ Weld-on edge 23 Edition 44 23-241
Wheel Loaders Buckets Americas South Model Interface Bucket Type Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 924K Fusion General Purpose 255 1 1.9-2.5 2.5-3.2 775-963 175-2119 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1161-136 2554-2992 BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 J25/BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1688-2123 3721-468 BOCE Pin On General Purpose 255 1 1.9-2.3 2.5-3. 812-893 1786-1965 J25/BOCE Sand and Gravel 275 18 2.6-3.2 3.4-4.1 126-1147 2262-2523 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 196-1383 2416-343 BOCE High Dump 255-36 1-12 3.-5. 4.-6.6 196-2149 3737-4738 BOCE 93K Fusion General Purpose 255 1 1.9-2.5 2.5-3.2 775-963 175-2119 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1161-136 2554-2992 BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 J25/BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1688-2123 3721-468 BOCE Pin On General Purpose 255 1 1.9-2.5 2.5-3.2 812-979 1786-2154 J25/BOCE Sand and Gravel 275 18 2.6-3.2 3.4-4.1 126-1147 2262-2523 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 196-1383 2416-343 BOCE High Dump 255-36 1-12 3.-3.5 4.-6.5 1695-2149 3737-4738 BOCE 938K Fusion General Purpose 255-275 1-18 2.5-2.9 3.2-3.8 961-142 2118-2292 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 175-136 237-2992 BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 J25/BOCE High Dump 36 12 4.1-5. 5.4-6.5 241-2123 45-468 BOCE Pin On General Purpose 255-275 1-18 2.4-2.8 3.2-3.8 968-159 2134-233 J25/BOCE Sand and Gravel 275 18 2.7-3.2 3.5-4.1 167-1147 2347-2523 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1178-1378 2596-338 BOCE High Dump 36 12 4.1-5. 5.4-6.5 265-2147 4553-4733 BOCE GET 23-242 Edition 44
Buckets Americas South Wheel Loaders Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 95H Fusion General Purpose 962H Performance Series 2894 114 2.9-3.4 3.75-4.5 1534-161 3382-3549 K8/BOCE Material Handling 2896 114 3.3-3.8 4.25-5. 171 375 K8/BOCE Coal 332 13 5.7-5.9 7.5-7.75 1928 4251 BOCE Rock 2969 117 2.7-3.25 3.75-4.25 1588-1638 35-3611 K9 Multi-Purpose 2946 116 2.87 3.75 287 46 BOCE Included Side Dump 3226 127 2.87 3.75 234 516 BOCE Included High Dump 2921 115 4.2-4.6 5.5-6. 2657 5857 BOCE Included Grapple 2921 115 3.-3.25 4.-4.25 2139 4715 K8/BOCE Waste 348 12 5.2 6.75 2163 4769 BOCE Included Woodchip 3327 131 9.2 12. 2121 4676 BOCE Included Pin On General Purpose Performance Series 2894 114 2.5-3.6 3.25-4.75 1419-1636 3128-367 K8/BOCE Material Handling Performance Series 2894 114 3.-3.8 3.9-5. 1538-1684 3391-3713 K8/BOCE Coal Performance Series 34 12 4.2-5.2 5.2-6.8 TBD BOCE Included Rock Performance Series 2972 117 2.9-3.1 3.8-4.1 1796-1838 356-452 K9 Multi-Purpose 2938 116 2.9 3.75 215 444 BOCE Included Side Dump 3226 127 2.9 3.75 246 53 BOCE Included Waste 358 12 5.2 6.75 2376 5235 BOCE Included Woodchip 3327 131 9.2 12. 2279 52 BOCE Included 966H Fusion General Purpose Performance Series 321 126 3.6-4.6 4.75-6. 1965-2143 4332-4724 K9/BOCE Material Handling Performance Series 321 126 3.8-4.88 5.-6.3 268-2254 4559-4969 K9/BOCE Coal Performance Series 3447 136 6.9 9. 2865 6316 BOCE Included Rock Performance Series 3255 128 3.2 4.5 284 4595 K9 Pin On General Purpose Performance Series 321 126 3.6-4.6 4.75-6. 2112-226 4656-4982 K9/BOCE Material Handling Performance Series 321 126 3.8-4.88 5.-6.3 2173-235 4791-5181 K9/BOCE Coal Performance Series 3447 136 6.9 9. 2795 6162 BOCE Included Rock Performance Series 3255 128 3.2 4.5 2362 527 K9 23 Edition 44 23-243
Wheel Loaders Buckets Americas South Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 972H Fusion General Purpose Performance Series 321 126 4.-5. 5.25-6.5 226-2212 4467-4877 K9/BOCE Material Handling Performance Series 321 126 5.-5.2 6.5-6.75 2274 513 K9/BOCE Coal Performance Series 3447 136 6.9 9. 3199 753 BOCE Included Rock Performance Series 3225 128 3.4-3.6 4.5-4.75 279 4583 K9 Pin On General Purpose Performance Series 321 126 4.-5. 5.25-6.5 2214-2315 4881-514 K9/BOCE Material Handling Performance Series 321 126 4.4-5.2 5.75-6.75 2269-2389 52-5267 K9/BOCE Coal Performance Series 3447 136 6.9 9. 323 761 BOCE Included Rock Performance Series 3255 128 3.4-4. 4.5-5.25 225-2397 496-5284 K9 966H 972H Fusion Multi-Purpose 322 127 2.9-3.1 3.75-4. 2892 6375 BOCE Included Side Dump 3677 145 3.4-3.6 4.5-4.75 2832 6243 BOCE Included High Dump 359 12 5.-5.4 6.5-7. 294 642 BOCE Included Grapple 348 12 3.2-3.6 4.25-4.75 438 9656 K9/BOCE Waste 3357 132 6.2-6.5 8.1-8.5 2569 5664 BOCE Included Woodchip 3937 155 9.6-9.9 12.5-13. 2543 566 BOCE Included Pin On Heavy Duty Rock 3251 125 3.4-4. 4.5-5.25 2425-2949 5346-651 K9/J35 Multi-Purpose 322 127 2.9-3.1 3.75-4. 286 6185 BOCE Included Side Dump 3677 145 3.4-3.6 4.5-4.75 2836 6252 BOCE Included Waste 3357 132 5.7-6. 7.5-7.85 2837 6255 BOCE Included Woodchip 3327-3937 131-155 7.6-9.9 1.-13. 2474-2514 5455-5542 BOCE Included 98H Pin On General Purpose Performance Series 345 134 5.-6.1 6.5-8. 2572-2726 567-61 K1/BOCE Material Handling Performance Series 345 134 5.5-5.7 7.25-7.5 278 6129 K1/BOCE Coal Performance Series 3638 143 7.8 1.25 3213 783 BOCE Included Rock Performance Series 3492 137 4.-4.4 5.25-5.75 281 6175 K1 Heavy Duty General Purpose 345 136 5.4-5.7 7.-7.5 3439 7582 BOCE Heavy Duty Quarry Rock 355-3568 138-14 4.-4.6 5.25-6. 36-3686 7288-8125 K11 Slag 3394 134 3.8 5. 532 11,689 K13 Waste 3886 153 9.3-9.8 12.25-12.75 398 8615 BOCE Included Woodchip 4166 164 11.3-11.5 14.75-15. 3887 857 BOCE Included 23-244 Edition 44
Buckets Americas South Wheel Loaders Model Interface Bucket Type Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 986H Pin On Rock 3772 148.5 5.4-6.1 7-8 3692-397 8139-8693 K11 988H Pin On General Purpose Performance Series 39 154 6.9-7.7 9.-1. 4937-5158 1,861-11,47 K11/BOCE General Purpose 386 152 7.7 1. 4895 1,773 BOCE Included Rock Performance Series 42 158 6.4-7.7 8.3-1. 4787-6221 1,531-11,341 K13 Rock 398 157 7.7 1. 4452 9812 K11 Heavy Duty Rock Performance Series 48 161 6.4 8.3 6221 13,686 K13 Heavy Duty Granite 398 157 6.4 8.33 7648 16,826 K13 K13/J6/ Slag 3866-397 152-156 5.3-6.4 7.-8.33 72-7653 15,84-16,837 Weld-on Edge Coal 412-445 162-175 11.5-14.5 15.-19. 591-7 13,3-15,4 BOCE Included Coal Seam 381 15 6.8 8.5 445 979 J46/BOCE Iron Ore 394 155 4.4 5.75 5475 12,7 K13 Serrated Edge Rock 397 156 6.9 9. 479 1,54 N/A 988K Pin On General Purpose Performance Series 3855 152 6.9-8.4 9.-11. 4539-4994 1,7-11,1 K11 Rock Performance Series 42 158 6.4-7.7 8.3-1. 488-5263 1,759-11,63 K13 Heavy Duty Rock Performance Series 48 161 6.4 8.3 636 14,21 K13 Heavy Duty Granite Performance Series 3986 157 6.4 8.3 7433 16,385 K13 N/A = Not Applicable Serrated Edge Rock 3968 156 6.4-6.9 8.3-9. 5455-5634 GET 12,26-12,421 Iron Ore 3922 154 4.7 6.2 5771 12,723 K13 Coal Slag 412-445 162-175 11.5-14.5 15.-19. 623-7 39-432 154-159 5.4-6.4 7.-8.3 7633-8454 13,278-15,4 BOCE Included 16,828-18,638 J6/Serrated Edge 23 Edition 44 23-245
Wheel Loaders Buckets Americas South Width Range Capacity Range Weight Range Model Interface Bucket Type GET mm in m 3 yd 3 kg lb 99H Pin On Rock Performance Series 461 182 8.6-1. 11.25-13. 7247-7497 15,977-16,528 K13 Heavy Duty Rock Performance Series 467 184 8.6 11.25 898 19,798 K13 Heavy Duty Granite Performance Series 4634 182 8.6 11.25 12 55 26,52 K15 Slag 445-45 175-177 8.5-9.2 11.2-12. 8882-945 19,54-2,79 Weld-on Edge Included Coal 437 172 13.4 17.5 84 16,41 BOCE Included Iron Ore 445 175 7. 9.2 8523 18,48 K15 Serrated Edge Rock 461 182 9.5 12.5 8155 17,94 N/A 992K Pin On Rock 4824-4884 19-192 1.7-12.2 14.-16. 9382-1 574 2,684-23,262 K15/K17 Heavy Duty Rock 568 2 1.7 14. 11 56 25,485 K17 High Abrasion Rock 568 2 1.7 14. 11 927 26,295 K15 Heavy Duty Granite 5165 23 1.7 14. 13 72 3,247 K15 Coal 617 243 19. 25. 12 54 27,56 BOCE Included Iron Ore 49 193 9. 11.8 11 172 24,577 K15 Serrated Edge Rock 4824 19 12.3 16. 1 282 22,62 N/A 993K Pin On Rock 568 2 12.2-14.5 16.-19. 12 864-14 29 28,31-31,26 K17 High Abrasion Rock 516 23 12.2-13. 16.-17. 15 25-15 456 33,451-34,4 K17 Heavy Duty Granite 216 23 13. 17. 17 418 38,32 K17 Coal 63 248 23. 31. 17 673 38,88 K17 Iron Ore 516 23 1. 13. 14 63 3,94 K17 Serrated Edge Rock 58 2 15. 19.5 13 915 3,615 N/A 994H Pin On Rock 565-622 222-245 14.9-19.1 19.5-25. 19 32-21 777 42,465-47,99 J8 Coal 622-63 245-248 31.3-35.9 41.-47. 22 211-23 598 48,864-51,916 J7/Weld-on Edge N/A = Not Applicable 23-246 Edition 44
Buckets Europe, Africa, Middle East Wheel Loaders Model Interface Bucket Type Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 924K Fusion General Purpose 255 1 1.9-2.5 2.5-3.2 775-963 175-2119 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1161-136 2554-2992 J25/BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1688-2123 3721-468 BOCE ISO General Purpose 255 1 2.2-2.3 2.9-3. 792-828 1746-1825 J25/BOCE Grading 26-29 12-114 1.78-2.1 2.3-2.6 847-922 1867-233 BOCE Light Material 275 18 3.5-5. 4.5-6.5 2454-2859 541-633 J25/BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1627-281 3587-4588 BOCE Pin On General Purpose 255 1 1.9-2.2 2.5-3. 812-893 1786-1965 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 196-1383 2416-343 J25/BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1695-2149 3737-4738 BOCE Sand & Gravel 275 18 2.6-3.2 3.4-4.1 126-1147 2262-2523 J25/BOCE 93K Fusion General Purpose 255 1 1.9-2.5 2.5-3.2 775-963 175-2119 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1161-136 2554-2992 J25/BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1688-2123 3721-468 BOCE ISO General Purpose 255 1 2.2-2.3 2.9-3. 792-828 1746-1825 J25/BOCE Grading 26-29 12-114 1.78-2.1 2.3-2.6 847-922 1867-233 BOCE Light Material 275 18 3.5-5. 4.5-6.5 2454-2859 541-633 J25/BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1627-281 3587-4588 BOCE Pin On General Purpose 255 1 1.8-2.4 2.5-3.2 812-979 1786-2154 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 196-1383 2416-343 J25/BOCE High Dump 255-36 1-12 3.-3.5 4.-6.5 1695-2149 3737-4738 BOCE Sand & Gravel 275 18 2.6-3.2 3.4-4.1 126-1147 2262-2523 BOCE 938K Fusion General Purpose 255-275 1-18 2.5-2.9 3.2-3.8 961-142 2118-2292 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 175-136 237-2992 J25/BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 BOCE High Dump 36 12 4.1-5. 5.4-6.5 241-2123 45-468 BOCE ISO General Purpose 275 18 2.5-2.7 3.2-3.5 915-959 217-2114 J25/BOCE Grading 26-29 12-114 1.78-2.1 2.3-2.6 847-922 1867-233 BOCE Light Material 275 18 3.5-5. 4.5-6.5 2454-2859 541-633 J25/BOCE High Dump 36 12 4.1-5. 5.4-6.5 21-281 449-4588 BOCE Pin On General Purpose 255-275 1-18 2.4-2.8 3.2-3.8 968-159 2134-233 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1178-1378 2596-338 BOCE High Dump 36 12 4.1-5. 5.4-6.5 265-2147 4553-4733 BOCE Sand & Gravel 275 18 2.7-3.2 3.5-4.1 175-1146 2365-2521 J25/BOCE GET 23 Edition 44 23-247
Wheel Loaders Buckets Europe, Africa, Middle East Model Interface Bucket Type 95K Fusion General Purpose Performance Series Width Range Capacity Range Weight Range GET mm in m 3 yd 3 kg lb 2894 114 2.9-3.6 3.79-4.7 1449-155 3195-3417 K8/BOCE Material Handling Performance Series 294-2994 114-117 3.1-3.4 4.5-4.45 1535-27 3384-4564 K8/BOCE Pin On General Purpose Performance Series 2894 114 2.9-3.6 3.79-4.7 1556-1683 343-371 K8/BOCE Material Handling Performance Series 294-2994 114-117 3.1-3.4 4.5-4.45 1543-26 342-4541 K8/BOCE Rock Performance Series 2969 117 2.9 3.8 1992 4382 K9 962K Fusion General Purpose Performance Series 2894 114 3.2-3.6 4.18-4.7 1517-155 3344-3417 K8/BOCE Material Handling Performance Series 294-2994 114-117 3.3-3.8 4.32-4.79 1574-2183 347-4812 K8/BOCE Pin On General Purpose Performance Series 2894 114 3.2-3.6 4.18-4.7 1647-1683 3631-371 K8/BOCE Material Handling Performance Series 294-2994 114-117 3.3-3.8 4.32-4.79 1582-2173 3488-479 K8/BOCE Rock Performance Series 2969 117 3.2 4.19 27 4554 K9 966K Fusion General Purpose Performance Series 321 126 3.6-4.6 4.75-6. 1943-282 4283-459 K9/BOCE Material Handling Performance Series 321 126 3.8-4.8 5.-6.3 268-2254 4559-4969 K9/BOCE Rock Performance Series 3252 128 3.2-3.4 4.25-4.5 284 4595 K9 Pin On General Purpose Performance Series 321 126 3.6-4.6 4.75-6. 1985-2194 4367-4827 K9/BOCE Material Handling Performance Series 3-3289 118-129 3.8-4.8 5.-6.3 21-384 462-6785 K9/BOCE Rock Performance Series 3252 128 3.2-3.4 4.25-4.5 2175 4785 K9 972K Fusion General Purpose Performance Series 321 126 4.-5. 5.25-6.5 1966-2147 4325-4723 K9/BOCE Material Handling Performance Series 321 126 4.4-5.2 5.72-6.76 197-2274 4195-53 K9/BOCE Rock Performance Series 3225 128 3.4-3.6 4.5-4.75 299 4618 K9 Pin On General Purpose Performance Series 321 126 4.-5. 5.25-6.5 289-2281 4596-518 K9/BOCE Material Handling Performance Series 321-3294 126-13 4.4-5.2 5.75-6.75 2248-3122 4946-6868 K9/BOCE Rock Performance Series 3252-335 128-132 3.4-4. 4.5-5.25 229-339 486-6686 K9/K1 98K Pin On General Purpose Performance Series 3413 134 5.-6. 6.5-7.8 2572-2831 567-6228 K1/BOCE Material Handling Performance Series 3413-358 134-141 5.5-5.7 7.25-7.5 2786-495 6149-99 K1/BOCE Rock Performance Series 351-3645 138-144 4.5-5.4 5.85-7.2 358-4335 6728-9537 K1/K11 23-248 Edition 44
Buckets Europe, Africa, Middle East Wheel Loaders Model Interface Bucket Type Width Capacity GET mm in m 3 yd 3 988H Pin On General Purpose 39 153.5 6.9 9. Straight General Purpose 39 153.5 7.6 9.9 Straight Rock 42 158.3 6.4 8.4 Spade Rock 42 158.3 6.9 9. Spade Rock 413 158. 7.7 1.1 Spade Rock 398 156.7 7.6 9.9 Spade Heavy Duty Rock 48 16.6 6.4 8.4 Spade Heavy Duty Granite 3988 157. 6.4 8.4 Spade Iron Ore 394 155.1 4.4 5.8 Spade Serrated Edge 38 149.6 6.4 8.4 V-Serrated Serrated Edge 3968 156.2 6.9 9. V-Serrated Coal 412 162.2 11.5 15. Straight Coal 4118 162.1 13 17. Straight Slag 3899 153.5 6.5 8.5 Serrated Slag 386 152. 5.4 7.1 Spade Slag 3962 156. 5.3 6.9 Straight Slag 39 153.5 5.3 6.9 Straight 99H Pin On Rock 461 181.5 9.2 12. Spade Rock 445 175.2 8.6 11.2 Spade Heavy Duty Rock 549 213. 8.55 11.2 Spade Heavy Duty Granite 4636 182.5 8.6 11.2 Spade Iron Ore 445 175.2 7.3 9.2 Spade Serrated Edge 445 175.2 8.6 11.2 V-Edge Serrated Edge 461 181.5 9.1 11.9 V-Edge Serrated Edge 461 181.5 9.5 12.4 Serrated Spade Coal 45 177.2 8.6 11.2 Straight Slag 445 175.2 9.2 12. Serrated Spade Slag 45 177.2 8.6 11.2 Serrated Spade 992G Pin On Serrated Edge 4826 19. 11.5 15. V-Serrated Serrated Edge 4826 19. 12.3 16.1 V-Serrated 992K Pin On Rock 4824 189.9 1.7 14. Spade Rock 4824 189.9 11.5 15. Spade Rock 4824 189.9 12.2 16. Spade Heavy Duty Rock 58 2. 1.7 14. Spade Heavy Duty Granite 5156 23. 1.7 14. Spade Iron Ore 49 192.9 9 11.8 Spade Serrated Edge 4824 189.9 12.3 16.1 V-Serrated Coal 617 242.9 18.9 24.7 Straight 23 Edition 44 23-249
Wheel Loaders Buckets Europe, Africa, Middle East Model Interface Bucket Type Width Capacity GET mm in m 3 yd 3 993K Pin On Rock 58 2. 12.2 16. Spade Rock 58 2. 13 17. Spade Rock 58 2. 13.8 18. Spade Rock 58 2. 14.5 19. Spade High Abrasion 516 23.1 12.2 16. Spade High Abrasion 516 23.1 13 17. Spade Heavy Duty Granite 516 23.1 13 17. Spade Iron Ore 516 23.1 1 13.1 Spade Serrated Edge 58 2. 14.9 19.5 V-Serrated Coal 63 248. 23.7 31. Straight 994F Pin On Rock 565 222.4 15 19.6 Spade Rock 565 222.4 17 22.2 Spade Rock 565 222.4 19 24.9 Spade Rock 622 244.9 18 23.5 Spade Rock 622 244.9 19 24.9 Spade Coal 622 244.9 31.5 41.2 Straight Coal 63 248. 36 47.1 V-Serrated 23-25 Edition 44
Buckets Europe, Africa, Middle East High Dump Buckets Wheel Loaders Dump Clearance Maximum Material Density Model Capacity Width Weight Standard Lift High Lift Standard Lift High Lift m 3 yd 3 mm in kg lb mm in mm in kg/m 3 lb/yd 3 kg/m 3 lb/yd 3 95H 5.1 6.7 3 118.1 2662 5869 4543 178.9 5147 22.6 873 1471 867 1461 7.2 9.4 32 126. 3444 7593 4625 182.1 5247 26.6 55 927 552 93 9. 11.8 34 133.9 3847 8481 4496 177. 5126 21.8 44 681 41 691 95K 5.1 6.7 3 118.1 262 5776 4567 179.8 522 197.7 934 1574 829 1397 7.2 9.4 32 126. 35 7716 46 181.1 51 2.8 55 927 47 792 9. 11.8 34 133.9 39 8598 465 183.1 515 22.8 41 691 35 59 962H 5.1 6.7 3 118.1 2662 5869 4543 178.9 5147 22.6 995 1677 715 125 7.2 9.4 32 126. 3444 7593 4625 182.1 5247 26.6 635 17 434 732 9. 11.8 34 133.9 3847 8481 4496 177. 5126 21.8 472 796 313 528 962K 5.1 6.7 3 118.1 262 5776 4567 179.8 522 197.7 934 1574 829 1397 7.2 9.4 32 126. 35 7716 48 189. 51 2.8 6 111 643 184 9. 11.8 34 133.9 39 8598 485 19.9 515 22.8 45 758 48 89 966H 6.7 8.8 32 126. 3598 7932 499 193.3 5677 223.5 94 1584 975 1643 11.5 15. 36 141.7 521 11,69 495 194.9 55 216.5 444 748 45 758 966K 6.7 8.8 32 126. 3598 7932 499 193.3 5677 223.5 964 1625 988 1665 11.5 15. 36 141.7 521 11,69 495 194.9 55 216.5 429 723 427 72 972H 6.7 8.8 32 126. 3598 7932 53 197. 5677 223.5 176 1814 984 1659 11.5 15. 36 141.7 521 11,69 517 23.5 55 216.5 496 836 435 733 972K 6.7 8.8 32 126. 3598 7932 499 193.3 5677 223.5 964 1625 988 1665 11.5 15. 36 141.7 521 11,69 517 23.5 55 216.5 53 848 446 752 23 Edition 44 23-251
Wheel Loaders Buckets Australia/New Zealand Model Interface Bucket Type Width Range Capacity Range Weight Range mm in m 3 yd 3 kg lb 924K Fusion General Purpose 255 1 1.9-2.5 2.5-3.2 775-963 175-2119 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1161-136 2554-2992 BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 J25/BOCE Side Dump 315 122 1.9 2.5 1653 3644 BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1688-2123 3721-468 BOCE Grapple 2697 16 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J25/BOCE Waste 359 12 3.6-4. 4.7-5.2 1416-1547 3122-341 BOCE Woodchip 333 131 4.9-5.5 6.4-7.2 1717-1795 3785-3957 BOCE Grading 27 16 1.9 2.5 1233 2716 BOCE ISO General Purpose 255-275 1-18 2.1-2.9 2.7-3.8 775-997 175-2193 J25/BOCE Pin On General Purpose 255 1 1.9-2.2 2.5-3. 812-893 1786-1965 J25/BOCE Sand and Gravel 275 18 2.6-3.2 3.4-4.1 126-1147 2262-2523 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 196-1383 2416-343 BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1695-2149 3737-4738 BOCE 93K Fusion General Purpose 255 1 1.9-2.5 2.5-3.2 775-963 175-2119 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1161-136 2554-2992 BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 J25/BOCE Side Dump 315 122 1.9 2.5 1653 3644 BOCE High Dump 255-36 1-12 3.-5. 4.-6.5 1688-2123 3721-468 BOCE Grapple 2697 16 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J25/BOCE Waste 359 12 3.6-4. 4.7-5.2 1416-1547 3122-341 BOCE Woodchip 333 131 4.9-5.5 6.4-7.2 1717-1795 3785-3957 BOCE Grading 27 16 1.9 2.5 1233 2716 BOCE ISO General Purpose 255-275 1-18 2.1-2.9 2.7-3.8 775-997 175-2193 J25/BOCE Pin On General Purpose 255 1 1.8-2.5 2.5-3.2 812-979 1786-2154 J25/BOCE Sand and Gravel 275 18 2.6-3.2 3.4-4.1 126-1147 2262-2523 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 196-1383 2416-343 BOCE High Dump 255-36 1-12 3.-3.5 4.-6.5 1695-2149 3737-4738 BOCE 938K Fusion General Purpose 255-275 1-18 2.5-2.9 3.2-3.8 961-142 2118-2292 J25/BOCE Light Material 275 18 3.1-5. 4.-6.5 175-136 237-2992 BOCE Multi-Purpose 255 1 2.1 2.7 1288 2834 J25/BOCE Side Dump 315 122 1.9 2.5 1653 3644 BOCE High Dump 36 12 4.1-5. 5.4-6.5 241-2123 45-468 BOCE Grapple 2697 16 2.7-2.9 3.5-3.8 1632-1673 3598-3688 J25/BOCE Waste 359 12 3.6-4. 4.7-5.2 1416-1547 3122-341 BOCE Woodchip 333 131 4.9-5.5 6.4-7.2 1717-1795 3785-3957 BOCE Grading 27 16 1.9 2.5 1233 2716 BOCE ISO General Purpose 255-275 1-18 2.1-2.9 2.7-3.8 775-997 175-2193 J25/BOCE Pin On General Purpose 255-275 1-18 2.4-2.8 3.2-3.8 968-159 2134-233 J25/BOCE Sand and Gravel 275 18 2.7-3.2 3.5-4.1 175-1146 2365-2521 J25/BOCE Light Material 275 18 3.5-5. 4.5-6.5 1178-1378 2596-338 BOCE High Dump 36 12 4.1-5. 5.4-6.5 265-2147 4553-4733 BOCE GET 23-252 Edition 44
Buckets Australia/New Zealand Wheel Loaders Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb IT62G HPL Material Handling 2921 115 3.1 4.1 1242 2738 K8X8 Material Handling 2921 115 3.2 4.2 1259 2776 K8X8 Woodchip 3277 129 5.5 7.2 1493 3291 N/A 95H, 95G, 962H, 926G N/A = Not Applicable Pin On General Purpose Performance Series 2894 114 3.1 4.1 157 3322 K8X8 General Purpose Performance Series 2894 114 3.3 4.3 155 3417 K8X8 Material Handling Performance Series 2894 114 3.2 4.2 1538 3391 K8X8 Material Handling Performance Series 2894 114 3.4 4.4 719 1585 K8X8 Material Handling Performance Series 2894 114 3.8 5. 1684 3713 K8X8 General Purpose 2921 115 3.1 4. 1483 3269 K8X8 General Purpose 2921 115 3.4 4.5 1583 349 K8X8 Material Handling 2921 115 3.4 4.5 1424 3139 K8X8 Material Handling 2946 116 4.2 5.5 1725 383 K8X8 Material Handling N/A N/A 3.3 4.3 1326 2923 K8X8 Rock 2972 117 2.9 3.8 155 3417 N/A Rock 2972 117 2.9 3.8 1618 3567 N/A Woodchip 3327 131 9.2 12. 2279 524 N/A HPL General Purpose 2921 115 3.1 4.1 1479 3261 K8X8 General Purpose 2921 115 3.2 4.2 128 2822 K8X8 General Purpose 2921 115 3.4 4.4 1385 353 K8X8 Woodchip 3327 131 9.2 12. 2349 5179 N/A Fusion General Purpose 2896 114 3.1 4.1 1322 2915 K8X8 General Purpose 2896 114 3.4 4.4 148 314 K8X8 General Purpose 2896 114 3.8 5. 1483 3269 K8X8 Rock 2969 117 3.1 4.1 1588 351 K9X8 Rock 2969 117 3.3 4.3 1638 3611 K9X8 Material Handling 2896 114 3.4 4.4 137 32 K8X8 Material Handling 2896 114 3.8 5. 1447 319 K8X8 Coal 332 13 5.9 7.7 1928 4251 N/A Multi-purpose 2946 116 2.87 3.75 287 461 N/A Side Dump 3226 127 2.87 3.75 234 5159 N/A High Dump 2921 115 4.6 6. 2657 5858 N/A Grapple 2921 115 3.25 4.25 2139 4716 N/A Waste 348 12 5.2 6.8 2163 4769 N/A Woodchip 3327 131 9.2 12. 2121 4676 N/A 23 Edition 44 23-253
Wheel Loaders Buckets Australia/New Zealand Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb 966, 972 N/A = Not Applicable Pin On General Purpose Performance Series 3193 126 4. 5.2 2164 4771 K9X8 General Purpose Performance Series 3193 126 4.2 5.5 222 4894 K9X8 General Purpose Performance Series 3193 126 4.6 6. 222 4894 K9X8 General Purpose Performance Series 3193 126 4.6 6. 233 577 K9X8 General Purpose Performance Series 321 126 5. 6.5 2332 5141 K9X8 Material Handling Performance Series 332 13 4. 5.2 2173 4791 K9X8 Material Handling Performance Series 3193 126 4.2 5.5 218 4647 K9X8 Material Handling Performance Series 3193 126 4.6 6. 2152 4744 K9X8 Rock Performance Series 3255 128 3.4 4.4 2362 527 K9X8 Rock Performance Series 3255 128 4. 5.2 2397 5284 K9X8 General Purpose 315 124 4. 5.2 1992 4392 K9X8 General Purpose 3226 127 5.2 6.8 2141 472 N/A Material Handling 332 13 4. 5.2 249 4517 K9 Material Handling 3311 13 4.7 6.1 227 4866 K9 Material Handling 32 126 4.9 6.4 213 4696 N/A Material Handling 3193 126 4.3 5.6 218 4647 N/A Rock 3252 128 N/A N/A 245 532 K9X8 Rock 3252 128 N/A N/A 2522 556 J35X8 Rock 3252 128 N/A N/A 2522 556 K9X8 Heavy Duty Rock 3251 128 3.6 4.7 2425 5346 J35 Heavy Duty Rock 3252 128 3.6 4.7 2562 5648 K9 Heavy Duty Rock 3251 128 4. 5.2 2949 651 K9 Woodchip 3327 131 8. 1.46 2474 5454 N/A Woodchip 3937 155 9.9 13. 2359 521 N/A Woodchip 3923 154 1.2 13.3 2279 524 N/A HPL General Purpose 323 119 3.8 5. 193 241 K9X8 General Purpose 3226 127 4.2 5.5 1986 4378 K9X8 General Purpose 3226 127 4.6 6. 19 4189 K9X8 Woodchip 3328 131 8. 1.46 236 523 N/A Woodchip 3937 155 9.9 13. 2825 6228 N/A 23-254 Edition 44
Buckets Australia/New Zealand Wheel Loaders Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb 966, 972 98H, 98G N/A = Not Applicable Fusion General Purpose 337 13 3.8 5. 173 3814 K9X8 General Purpose 337 13 4.2 5.5 188 3986 K9X8 General Purpose 3311 13 4.8 6.3 1914 422 K9X8 Rock/Spade 3252 128 N/A N/A 2174 4793 K9X8 Rock/Spade 3252 128 N/A N/A 25 4519 K9X8 Material Handling 3311 13 4.2 5.5 185 479 K9X8 Material Handling 3311 13 4.6 6. 1882 4149 K9X8 Coal 345 134 6.7 8.8 2271 57 K9X8 Coal 345 134 7.7 1.1 2454 541 K9X8 Multi-purpose 322 127 N/A N/A 2785 614 N/A Side Dump 3677 145 N/A N/A 2832 6243 N/A High Dump 359 12 N/A N/A 2862 631 N/A Grapple 348 12 N/A N/A 438 9656 N/A Waste 3323 131 N/A N/A 2569 5664 N/A Woodchip 3923 154 9.94 13 2543 566 N/A Pin On General Purpose Performance Series 345 134 5.3 6.9 2572 567 K1X8 General Purpose Performance Series 345 134 5.7 7.5 2677 592 K1X8 General Purpose Performance Series 345 134 7. 9.2 2726 61 K1X8 Material Handling Performance Series 345 134 5.7 7.5 278 6129 K1X8 Rock Performance Series 351 138 N/A N/A 342 75 K1X8 Rock Performance Series 351 138 N/A N/A 3531 7785 K1X8 General Purpose 3531 139 4.8 6.3 234 5159 K1X8 General Purpose 3531 139 5.2 6.8 243 5357 K1X8 General Purpose 3531 139 5.5 7.2 253 5518 K1X8 General Purpose 3413 134 N/A N/A 258 5688 K1X8 General Purpose 3531 139 5.2 6.8 2398 5287 K1X8 General Purpose 3531 139 5.5 7.2 2654 5851 K1X8 General Purpose-HD 3533 139 5.5 7.2 3167 6982 K1X8 Material Handling 3531 139 5.7 7.5 2727 612 K1X8 Material Handling 3683 145 7.5 9.7 3512 7743 K1X8 Rock 348 137 N/A N/A 2576 5679 J4X8 Rock 3492 137 N/A N/A 2754 672 K1X8 Rock 3492 137 N/A N/A 384 6799 J4X8 Rock 3492 137 N/A N/A 3132 695 K1X8 Coal 3638 143 N/A N/A 3622 7985 N/A Woodchip 4165 164 N/A N/A 3996 881 N/A Pin On Coal 38 15 6.5 8.5 4511 9945 K11 Coal 412 162 11.5 15. 591 13,29 BOCE Included Coal 412 162 13. 17. 6325 13,944 BOCE Included General Purpose 2695 16 7. 9.2 4218 9299 K11 General Purpose 39 154 7.7 1.1 477 1,516 BOCE Included Rock 3835 151 6.4 8.4 4815 1,615 K13 Rock 426 159 6.9 9. 4662 1,278 K11 Rock 426 159 7.7 1.1 46 1,141 K11 23 Edition 44 23-255
Wheel Loaders Buckets Australia/New Zealand Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb 99H Pin On Rock 445 175 8.5 11.1 6772 14,93 K13 Rock 4597 181 9.2 12. 738 15,516 K13 Heavy Duty Rock 451 178 8.5 11.1 8594 18,947 K13 MAWPs Heavy Duty Granite 462 182 8.5 11.1 9929 21,89 K15 MAWPs Slag 445 175 9.2 12. 9613 21,193 Serrated Slag 45 177 8.5 11.1 9149 2,17 K13 Coal 437 172 13.4 17.5 746 16,446 BOCE Included Slag 445 175 7. 9.2 8525 18,794 K15 Serrated Edge Rock 461 181 9.5 12.4 814 17,946 N/A 992K Pin On Rock 4824 19 1.7 14. 9382 2,684 K15 Rock 4884 192 11.5 15. 9776 21,552 K17 Rock 4824 19 11.5 15. 9557 21,7 K15 Rock 4824 19 12.2 16. 1 574 23,312 K17 Heavy Duty Rock 568 2 1.7 14. 11 56 25,485 K17 High Abrasion Rock 568 2 1.7 14. 11 927 26,295 K15 Heavy Duty Granite 5165 23 1.7 14. 13 72 3,247 K15 Coal 617 243 19. 24.9 12 54 27,567 BOCE Included Iron Ore 49 193 9. 11.8 11 172 24,63 K15 Serrated Edge Rock 4824 19 12.3 16.1 1 282 22,668 N/A 992G Pin On Coal 62 244 23. 3. 11 679 25,694 K13 Rock 4824 19 12.2 16. 9783 21,522 K15 Rock 62 244 23. 3.1 N/A N/A K13 Rock 484 191 11.5 15. N/A N/A K15 Rock 4824 19 11.5 15. 9451 2,836 K15 Rock 4824 19 12.2 16. 974 21,394 K17 Rock 56 199 11.4 14.9 11 674 25,737 K17 Heavy Duty Granite 56 199 11.5 15. 13 39 29,52 K15 993K Pin On Rock 568 2 12.2 16. 12 864 28,36 K17 Rock 568 2 13. 17. 13 38 29,498 K17 Rock 568 2 13.8 18. 14 24 3,918 K17 Rock 568 2 14.5 19. 14 29 31,325 K17 High Abrasion Rock 516 23 12.2 16. 15 25 33,521 K17 High Abrasion Rock 516 23 13. 17. 15 456 34,75 K17 Heavy Duty Granite 516 23 13. 17. 17 418 38,4 K17 Coal 63 248 23. 3.1 17 673 38,962 K17 Iron Ore 516 23 1. 13.1 14 63 31,4 K17 Serrated Edge Rock 58 2 15. 19.6 13 915 3,677 N/A 994F Pin On Rock 565 222 14.9 19.5 19 32 42,554 J8 Rock 565 222 17.2 22.5 19 525 43,45 J8 Rock 565 222 19.1 25. 21 282 46,919 J8 Rock 622 245 18. 23.5 21 427 47,238 J8 Rock 622 245 19.1 25. 21 777 48,1 J8 Coal 622 245 31.3 4.9 22 211 48,967 J7 Coal 63 248 35.9 47. 23 598 52,25 Serrated N/A = Not Applicable 23-256 Edition 44
Buckets Southeast Asia Wheel Loaders Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb IT62G HPL Material Handling 2921 115 3.2 4.2 1259 571 K8X8 Woodchip 3277 129 8.4 11. 1493 677 N/A 95H, 95G, 962H, 962G 966, 972 N/A = Not Applicable Pin On General Purpose 2894 114 3.1 4.1 157 684 K8X8 General Purpose 2894 114 3.3 4.3 155 73 K8X8 Material Handling 2894 114 3.2 4.2 1538 698 K8X8 Material Handling 2894 114 3.4 4.4 1584 719 K8X8 Material Handling 2894 114 3.8 5. 1684 764 K8X8 General Purpose 2997 118 2.7 3.5 1347 611 K8X8 General Purpose 2921 115 3.6 4. 1483 673 K8X8 Material Handling 2946 116 5.73 7.5 1878 852 N/A Material Handling 2946 116 4.4 5.8 195 864 N/A Material Handling N/A N/A 3.3 4.3 1326 61 K8X8 Waste Handling 358 12 5.2 6.8 2375 177 N/A HPL Woodchip 3327 131 9.2 12. 2349 166 N/A Pin On General Purpose 3193 126 4. 5.2 2164 982 K9X8 General Purpose 3193 126 4.2 5.5 222 17 K9X8 General Purpose 3193 126 4.6 6. 222 17 K9X8 General Purpose 3193 126 4.6 6. 233 145 K9X8 General Purpose 321 126 5. 6.5 2332 158 K9X8 Material Handling 332 13 4. 5.2 2173 986 K9X8 Material Handling 3193 126 4.2 5.5 218 956 K9X8 Material Handling 3193 126 4.6 6. 2152 976 K9X8 Rock 3255 128 3.4 4.4 2362 171 K9X8 Rock 3255 128 4. 5.2 2397 187 K9X8 General Purpose 315 124 3.8 5. 2188 992 K9X8 General Purpose 315 124 3.6 4.7 193 863 K9X8 General Purpose 315 124 4. 5.2 1992 94 K9X8 Material Handling 3454 136 5.73 7.5 2586 1173 N/A Material Handling 3429 135 7.26 9.5 2595 1177 N/A Rock 3252 128 N/A N/A 245 191 K9X8 Woodchip 3937 155 9.9 12.9 2359 17 N/A HPL General Purpose 323 119 3.82 5. 193 496 K9X8 General Purpose 3226 127 4.21 5.5 1986 91 K9X8 23 Edition 44 23-257
Wheel Loaders Buckets Southeast Asia Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb 98H, 98G 988H, 988G Pin On General Purpose 345 134 5.3 6.9 2572 1167 K1X8 General Purpose 345 134 5.7 7.5 2677 1214 K1X8 General Purpose 345 134 7. 9.2 2726 1237 K1X8 Material Handling 345 134 5.7 7.5 278 1261 K1X8 Rock 351 138 N/A N/A 342 1543 K1X8 Rock 351 138 N/A N/A 3531 162 K1X8 General Purpose 3531 139 5.4 7.1 243 112 K1X8 General Purpose 3531 139 5.7 7.5 253 1135 K1X8 Rock 3492 137 N/A N/A 384 1399 J4X8 Coal 3638 143 N/A N/A 3622 1643 N/A HPL General Purpose 3454 136 5. 6.5 2794 1267 K1X8 BH Block Handler 3658 144 4.5 5.9 381 1728 K1X8 Pin On Coal 38 15 6.5 8.5 4511 246 K11 Coal 412 162 11.5 15. 591 2681 BOCE Included Coal 412 162 13. 17. 6325 2869 BOCE Included Rock 426 159 6.9 9. 4662 2115 K11 Rock 426 159 7.7 1.1 46 287 K11 99H Pin On Rock 445 175 8.5 11.1 6772 372 K13 Rock 4597 181 9.2 12. 738 3192 K13 Heavy Duty Granite 462 182 8.5 11.1 9929 454 K15 MAWPs Slag 445 175 9.2 12. 9613 436 Serrated Weld-On Edge Slag 45 177 8.5 11.1 9149 415 K13 992K Pin On Rock 4824 19 1.7 14. 9382 4256 K15 Rock 4884 192 11.5 15. 9776 4434 K17 Rock 4824 19 11.5 15. 9557 4335 K15 Rock 4824 19 12.2 16. 1 574 4796 K17 Heavy Duty Rock 568 2 1.7 14. 11 56 5244 K17 High Abrasion Rock 568 2 1.7 14. 11 927 541 K15 Heavy Duty Granite 5165 23 1.7 14. 13 72 6223 K15 Serrated Edge Rock 4824 19 12.3 16.1 1 282 4664 N/A 992G Pin On Rock 62 244 23. 3.1 N/A N/A K13 Rock 484 191 11.5 15. N/A N/A K15 Rock 4824 19 11.5 15. 9451 4287 K15 Rock 56 199 11.4 14.9 11 674 5295 K17 Heavy Duty Granite 56 199 11.5 15. 13 39 674 K15 993K Pin On Rock 568 2 12.2 16. 12 864 5835 K17 Rock 568 2 14.5 19. 14 29 6445 K17 High Abrasion Rock 516 23 13. 17. 15 456 711 K17 Heavy Duty Granite 516 23 13. 17. 17 418 791 K17 Coal 63 248 23. 3.1 17 673 816 K17 Iron Ore 516 23 1. 13.1 14 63 6379 K17 994F Pin On Rock 565 222 14.9 19.5 19 32 8755 J8 Rock 565 222 17.2 22.5 19 525 8857 J8 Rock 5639 222 14. 18.3 18 31 835 J8 Coal 622 245 31.3 4.9 22 211 1,75 J7 Coal 63 248 35.9 47. 23 598 1,74 Serrated Weld-On Edge N/A = Not Applicable 23-258 Edition 44
Buckets China Wheel Loaders Model Interface Bucket Type Width Capacity Weight GET mm in m 3 yd 3 kg lb IT62G IT Woodchip 3277 129 8.4 1.99 1493 3291 N/A 95H, 95G, 962H, 962G 966G, 972G Pin On N/A = Not Applicable General Purpose Performance Series 2894 114 3.1 4.5 157 3322 K8X8 General Purpose Performance Series 2894 114 3.3 4.32 155 3417 K8X8 Material Handling Performance Series 2894 114 3.2 4.19 1538 3391 K8X8 Material Handling Performance Series 2894 114 3.4 4.45 1584 3492 K8X8 Material Handling Performance Series 2894 114 3.8 4.97 1684 3713 K8X8 General Purpose 2997 118 2.7 3.53 1347 297 K8X8 General Purpose 2921 115 3.6 4. 1483 3269 K8X8 Material Handling 2946 116 5.73 7.49 1878 414 N/A Material Handling 2946 116 4.4 5.75 195 42 N/A Material Handling N/A 3.3 4.32 1326 2923 K8X8 Waste Handling 358 12 5.2 6.8 2375 5236 N/A Rock 2972 117 2.9 3.79 1826 426 J35X8 General Purpose Performance Series 3193 126 4. 5.23 2164 4771 K9X8 General Purpose Performance Series 3193 126 4.2 5.49 222 4894 K9X8 General Purpose Performance Series 3193 126 4.6 6.2 222 4894 K9X8 General Purpose Performance Series 3193 126 4.6 6.2 233 577 K9X8 General Purpose Performance Series 321 126 5. 6.54 2332 5141 K9X8 Material Handling Performance Series 332 13 4. 5.23 2173 4791 K9X8 Material Handling Performance Series 3193 126 4.2 5.49 218 4647 K9X8 Material Handling Performance Series 3193 126 4.6 6.2 2152 4744 K9X8 Rock Performance Series 3255 128 3.4 4.45 2362 527 K9X8 Rock Performance Series 3255 128 4. 5.23 2397 5284 K9X8 General Purpose 3193 126 4.96 6.49 2125 4685 K9X8 General Purpose 315 124 3.6 4.71 193 4195 K9X8 General Purpose 315 124 4. 5.23 1992 4392 K9X8 Material Handling 332 13 4. 5.23 249 4517 K9X8 Material Handling 3311 13 4.7 6.15 227 4866 K9X8 Material Handling 3447 136 5.73 7.49 2426 5348 N/A Rock 3252 128 245 532 K9X8 Side Dump 3299 13 3.4 4.45 3855 8499 K8X8 23 Edition 44 23-259
Wheel Loaders Buckets China Model Interface Bucket Type Width Capacity Weight Range GET mm in m 3 yd 3 kg lb 98H, Pin On General Purpose 345 134 5.3 6.93 2572 567 K1X8 98G Performance Series General Purpose 345 134 5.7 7.46 2677 592 K1X8 Performance Series General Purpose 345 134 7. 9.16 2726 61 K1X8 Performance Series Material Handling 345 134 5.7 7.46 278 6129 K1X8 Performance Series Rock Performance Series 351 138 5.4 7.1 342 75 K1X8 Rock Performance Series 351 138 5.4 7.1 3531 7785 K1X8 General Purpose 3531 139 5.4 7.6 243 5357 K1X8 HPL Block Handler 3658 144 4.5 5.89 381 84 K1X8 986H Pin On Rock 3772 148.5 5.4-6.1 7-8 3692-397 8139-8693 J46 988H, 988G Pin On Coal 38 15 6.5 8.5 4511 9945 K11 Coal 412 162 11.5 15.4 591 13,29 BOCE Included Coal 412 162 13. 17. 6325 13,944 BOCE Included General Purpose 39 154 7.7 1.7 477 1,516 BOCE Included Rock 3835 151 6.4 8.37 4815 1,615 K13 Rock 426 159 6.9 9.2 4662 1,278 K11 Rock 426 159 7.7 1.7 46 1,141 K11 99H Pin On Rock 445 175 8.5 11.12 6772 14,93 K13 Rock 4597 181 9.2 12.3 738 15,516 K13 Heavy Duty Rock 451 178 8.5 11.12 8594 18,947 K13 MAWPs Heavy Duty Granite 462 182 8.5 11.12 9929 21,89 K15 MAWPs Slag 445 175 9.2 12.3 9613 21,193 Serrated Weld-On Edge Slag 45 177 8.5 11.12 9149 2,17 K13 992K Pin On Rock 4824 19 1.7 14. 9382 2,684 K15 Rock 4884 192 11.5 15.4 9776 21,552 K17 Rock 4824 19 11.5 15.4 9557 21,7 K15 Rock 4824 19 12.2 15.96 1 574 23,312 K17 Heavy Duty Rock 568 2 1.7 14. 11 56 25,485 K17 High Abrasion Rock 568 2 1.7 14. 11 927 26,295 K15 Heavy Duty Granite 5165 23 1.7 14. 13 72 3,247 K15 Serrated Edge Rock 4824 19 12.3 16.9 1 282 22,668 N/A 992G Pin On Rock 62 244 23. 3.8 N/A N/A K13 Rock 484 191 11.5 15.4 N/A N/A K15 Rock 4824 19 11.5 15.4 9451 2,836 K15 Rock 56 199 11.4 14.91 11 674 25,737 K17 Heavy Duty Granite 56 199 11.5 15.4 13 39 29,52 K15 993K Pin On Rock 568 2 12.2 15.96 12 864 28,36 K17 Rock 568 2 14.5 18.97 14 29 31,325 K17 High Abrasion Rock 516 23 13. 17. 15 456 34,75 K17 Heavy Duty Granite 516 23 13. 17. 17 418 38,4 K17 Coal 63 248 23. 3.8 17 673 38,962 K17 Iron Ore 516 23 1. 13.8 14 63 31,4 K17 994F Pin On Rock 565 222 17.2 22.5 19 525 43,45 J8 Rock 5639 222 14. 18.31 18 31 4,367 J8 Coal 622 245 31.3 4.94 22 211 48,967 J7 Coal 63 248 35.9 46.96 23 598 52,25 Serrated Weld-On Edge N/A = Not Applicable 23-26 Edition 44
Bucket Selection 96H2 914G2 Wheel Loaders 96H2 Vertical Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose.9 1.18 1755 2952 Light Material 1.2 1.57 128 232 Multi-Purpose.75.98 2131 3584 96H2 Horizontal Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose.9 1.18 1889 3177 Light Material 1.2 1.57 1271 2138 Multi-Purpose.75.98 2184 3674 23 97H2 Vertical Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose 1. 1.31 1584 2664 Light Material 1.2 1.57 1218 249 Multi-Purpose.75.98 2149 3615 97H2 Horizontal Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose 1. 1.31 176 287 Light Material 1.2 1.57 131 223 Multi-Purpose.75.98 222 374 98H2 Vertical Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose 1.1 1.44 1549 265 Light Material 1.5 1.96 134 1739 Multi-Purpose.9 1.18 1929 3245 98H2 Horizontal Coupler Bucket Type Rated Capacity Maximum Material Density m 3 yd 3 kg/m 3 lb/yd 3 General Purpose 1.1 1.44 1658 2789 Light Material 1.5 1.96 116 186 Multi-Purpose.9 1.18 1967 339 yd 3 m 3 914G2 BUCKET CAPACITY MATERIAL DENSITY (THOUSANDS) kg/m 3 lb/yd 3 KEY A 1.4 m 3 (1.8 yd 3 ) General Purpose Bucket, bolt-on edge 1.4 m 3 (1.8 yd 3 ) General Purpose Bucket, bolt-on teeth and segments B 1.3 m 3 (1.7 yd 3 ) General Purpose Bucket, bolt-on edge 1.3 m 3 (1.7 yd 3 ) General Purpose Bucket, bolt-on teeth and segments 1.3 m 3 (1.7 yd 3 ) General Bucket, bolt-on teeth 1.3 m 3 (1.7 yd 3 ) General Purpose Bucket, flush mounted teeth C 1.2 m 3 (1.6 yd 3 ) General Purpose Bucket, bolt-on teeth Edition 44 23-261
Wheel Loaders Bucket Selection 924K Bucket Size yd 3 m 3 924K Fusion kg/m 3 Bucket Size 924K Pin On kg/m 3 yd 3 m 3 BUCKET CAPACITY BUCKET CAPACITY MATERIAL DENSITY lb/yd 3 lb/yd 3 MATERIAL DENSITY % = Bucket Fill Factor 115% 1% 95% KEY A Standard Lift B High Lift 23-262 Edition 44
Bucket Selection 93K Wheel Loaders Bucket Size yd 3 m 3 93K Fusion kg/m 3 BUCKET CAPACITY 23 lb/yd 3 MATERIAL DENSITY 93K Pin On Bucket Size kg/m 3 yd 3 m 3 BUCKET CAPACITY lb/yd 3 MATERIAL DENSITY % = Bucket Fill Factor 115% 1% 95% KEY A Standard Lift B High Lift Edition 44 23-263
Wheel Loaders Bucket Selection 938K Bucket Size yd 3 m 3 938K Fusion kg/m 3 Bucket Size yd 3 m 3 938K Pin On kg/m 3 BUCKET CAPACITY BUCKET CAPACITY MATERIAL DENSITY lb/yd 3 MATERIAL DENSITY lb/yd 3 % = Bucket Fill Factor 115% 1% 95% KEY A Standard Lift B High Lift 23-264 Edition 44
Bucket Selection 924K (LRC) Wheel Loaders Bucket Fill Factor General Purpose Pin On Fusion 924K (LRC) kg/m3 145 1525 16 1675 175 1825 19 1975 25 2125 22 2275 235 lb/yd3 2443 257 2696 2822 2949 375 322 3328 3454 3581 377 3833 396 m3 yd3 1.7 2.2 112% 18% 15% 11% 98% 1.9 2.5 112% 18% 13% 1% 96% 2.1 2.7 115% 11% 15% 11% 97% 1.9 2.5 111% 17% 13% 99% 95% 2.1 2.7 114% 19% 14% 1% 96% 2.3 3. 19% 13% 99% 94% 23 Bucket Fill Factor Light Material Pin On Fusion kg/m3 65 7 75 8 85 9 95 1 15 11 115 12 125 lb/yd3 195 118 1264 1348 1432 1517 161 1685 1769 1854 1938 222 216 m3 yd3 3.5 4.6 114% 18% 13% 98% 4.2 5.5 11% 13% 97% 3.5 4.6 115% 19% 13% 98% 4.2 5.5 112% 15% 98% Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 1% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing. 924K (LRC) Fill Factors Materials Density Fill % Earth and rock ~ 18 kg/m3 ~ 333 lb/yd3 ~ 115% Sand and gravel ~ 17 kg/m3 ~ 2865 lb/yd3 ~ 115% Aggregates ~ 16 kg/m3 ~ 2696 lb/yd3 ~ 15% Bulk grains ~ 75 kg/m3 ~ 1264 lb/yd3 ~ 1% Woodchips ~ 5 kg/m3 ~ 843 lb/yd3 ~ 1% Edition 44 23-265
Wheel Loaders Bucket Selection 93K (LRC) 93K (LRC) Bucket Fill Factor General Purpose Pin On Fusion kg/m3 1375 145 1525 16 1675 175 1825 19 1975 25 2125 lb/yd3 2317 2443 257 2696 2822 2949 375 322 3328 3454 3581 High Lift m3 yd3 kg/m3 lb/yd3 2.1 2.7 111% 16% 12% 98% 95% 573 965 2.3 3. 114% 19% 14% 1% 96% 519 874 2.5 3.3 114% 18% 13% 98% 94% 474 799 2.1 2.7 115% 11% 15% 11% 97% 564 951 2.3 3. 114% 19% 14% 99% 95% 511 862 2.5 3.3 115% 19% 14% 99% 94% 467 787 Bucket Fill Factor Light Material Pin On Fusion kg/m3 65 7 75 8 85 9 95 1 15 11 115 lb/yd3 195 118 1264 1348 1432 1517 161 1685 1769 1854 1938 High Lift m3 yd3 kg/m3 lb/yd3 4.2 5.5 114% 18% 12% 96% 27 455 5. 6.5 19% 12% 96% 228 384 4.2 5.5 19% 13% 97% 267 45 5. 6.5 112% 14% 97% 225 379 Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 1% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing. 93K (LRC) Fill Factors Materials Density Fill % Earth and rock ~ 18 kg/m 3 ~ 333 lb/yd3 ~ 115% Sand and gravel ~ 17 kg/m 3 ~ 2865 lb/yd3 ~ 115% Aggregates ~ 16 kg/m 3 ~ 2696 lb/yd3 ~ 15% Bulk grains ~ 75 kg/m 3 ~ 1264 lb/yd3 ~ 1% Woodchips ~ 5 kg/m 3 ~ 843 lb/yd3 ~ 1% 23-266 Edition 44
Bucket Selection 938K (LRC) Wheel Loaders Bucket Fill Factor General Purpose Pin On Fusion 938K (LRC) kg/m3 1375 145 1525 16 1675 175 1825 19 1975 25 2125 lb/yd3 2317 2443 257 2696 2822 2949 375 322 3328 3454 3581 High Lift m3 yd3 kg/m3 lb/yd3 2.5 3.3 111% 16% 12% 98% 95% 516 869 2.7 3.5 111% 16% 12% 98% 474 799 2.9 3.8 113% 18% 13% 98% 439 74 2.5 3.3 11% 16% 11% 97% 56 853 2.7 3.5 111% 16% 11% 97% 466 784 2.9 3.8 114% 18% 13% 98% 431 726 23 Bucket Fill Factor Light Material Pin On Fusion kg/m3 65 7 75 8 85 9 95 1 15 11 115 lb/yd3 195 118 1264 1348 1432 1517 161 1685 1769 1854 1938 High Lift m3 yd3 kg/m3 lb/yd3 4.2 5.5 114% 18% 13% 98% 293 494 5. 6.5 113% 17% 11% 95% 248 417 4.2 5.5 114% 18% 13% 98% 288 485 5. 6.5 115% 18% 11% 96% 243 41 Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater than 1% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection table for bucket sizing. 938K (LRC) Fill Factors Materials Density Fill % Earth and rock ~ 18 kg/m 3 ~ 333 lb/yd3 ~ 115% Sand and gravel ~ 17 kg/m 3 ~ 2865 lb/yd3 ~ 115% Aggregates ~ 16 kg/m 3 ~ 2696 lb/yd3 ~ 15% Bulk grains ~ 75 kg/m 3 ~ 1264 lb/yd3 ~ 1% Woodchips ~ 5 kg/m 3 ~ 843 lb/yd3 ~ 1% Edition 44 23-267
Wheel Loaders Bucket Selection 95K 95K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Standard Linkage 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 23-268 Edition 44
Bucket Selection 95K Wheel Loaders 95K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 23 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) High Lift Linkage 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition 44 23-269
Wheel Loaders Bucket Selection 95K 95K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Power Package 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 23-27 Edition 44
Bucket Selection 962K Wheel Loaders 962K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 23 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Standard Linkage 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition 44 23-271
Wheel Loaders Bucket Selection 962K 962K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Pin On 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) High Lift Linkage 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Fusion QC 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) 2.9 m3 (3.79 yd3) 3.34 m3 (4.37 yd3) 2.9 m3 (3.79 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Material Handling 3.3 m3 (4.32 yd3) 3.8 m3 (4.97 yd3) 3.3 m3 (4.32 yd3) 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 23-272 Edition 44
Bucket Selection 966M Wheel Loaders 966M Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) General Purpose 4. m3 (5.23 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 4.2 m3 (5.49 yd3) 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 23 Standard Linkage Pin On Material Handling/ Standard 4.4 m3 (5.75 yd3) 4.6 m3 (6.2 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Material Handling/ Heavy Duty 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Hook On General Purpose 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition 44 23-273
Wheel Loaders Bucket Selection 966K 966K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) General Purpose 4. m3 (5.23 yd3) 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) Pin On 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Standard Linkage Material Handling Rock Coal 4.2 m3 (5.49 yd3) 3.4 m3 (4.45 yd3) 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Fusion QC General Purpose 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Coal 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 23-274 Edition 44
Bucket Selection 966K Wheel Loaders 966K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) General Purpose 4. m3 (5.23 yd3) 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) Pin On 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 23 High Lift Linkage Material Handling Rock Coal 4.2 m3 (5.49 yd3) 3.4 m3 (4.45 yd3) 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Fusion QC General Purpose 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Coal 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availabilit Edition 44 23-275
Wheel Loaders Bucket Selection 972M 972M Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) General Purpose 4.6 m3 (5.75 yd3) 4.8 m3 (6.28 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) Standard Linkage Pin On Material Handling/ Standard 5. m3 (6.54 yd3) 4.8 m3 (6.28 yd3) 5. m3 (6.54 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Material Handling/ Heavy Duty 5. m3 (6.54 yd3) 5.2 m3 (6.8 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) 5.98 m3 (7.82 yd3) 5.2 m3 (6.8 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 23-276 Edition 44
Bucket Selection 972K Wheel Loaders 972K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) General Purpose 4.6 m3 (6.2 yd3) 4.8 m3 (6.28 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 23 5. m3 (6.54 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Pin On Material Handling 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Standard Linkage Rock Coal 3.6 m3 (4.71 yd3) 4. m3 (5.23 yd3) 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) 4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3) 4.6 m3 (6.2 yd3) 3.8 m3 (4.97 yd3) 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) General Purpose 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Fusion QC 4.8 m3 (6.28 yd3) 5. m3 (6.54 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Rock 3.6 m3 (4.71 yd3) 4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3) Coal 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition 44 23-277
Wheel Loaders Bucket Selection 972K 972K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) General Purpose 4.6 m3 (6.2 yd3) 4.8 m3 (6.28 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 5. m3 (6.54 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Pin On Material Handling 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) High Lift Linkage Rock Coal 3.6 m3 (4.71 yd3) 4. m3 (5.23 yd3) 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) 4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3) 4.6 m3 (6.2 yd3) 3.8 m3 (4.97 yd3) 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) General Purpose 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Fusion QC 4.8 m3 (6.28 yd3) 5.52 m3 (7.22 yd3) 4.8 m3 (6.28 yd3) 5. m3 (6.54 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Rock 3.6 m3 (4.71 yd3) 4.14 m3 (5.42 yd3) 3.42 m3 (4.47 yd3) Coal 7.1 m3 (9.29 yd3) 8.17 m3 (1.69 yd3) 7.1 m3 (9.29 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 Extended Capacity Linkage Pin On Fusion QC General Purpose General Purpose 4.6 m3 (6.2 yd3) 4.9 m3 (6.41 yd3) 4.6 m3 (6.2 yd3) 4.9 m3 (6.41 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.64 m3 (7.38 yd3) 4.9 m3 (6.41 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.64 m3 (7.38 yd3) 4.9 m3 (6.41 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 23-278 Edition 44
Bucket Selection 98K Wheel Loaders 98K Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 Standard Linkage Pin On General Purpose Rock Coal 5.4 m3 (7.6 yd3) 6.21 m3 (8.12 yd3) 5.4 m3 (7.6 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) 8.2 m3 (1.73 yd3) 9.43 m3 (12.33 yd3) 8.2 m3 (1.73 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 23 Bucket Fill Factors 115% 11% 15% 1% 95% Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 High Lift Linkage Pin On General Purpose Rock Coal 5.4 m3 (7.6 yd3) 6.21 m3 (8.12 yd3) 5.4 m3 (7.6 yd3) 4.4 m3 (5.75 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) 8.2 m3 (1.73 yd3) 9.43 m3 (12.33 yd3) 8.2 m3 (1.73 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 Aggregate Package Linkage Pin On General Purpose Material Handling 5.7 m3 (7.46 yd3) 6. m3 (7.85 yd3) 5.7 m3 (7.46 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) 6.9 m3 (9.2 yd3) 6. m3 (7.85 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 4213 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Material Handling buckets are flat floor buckets. These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Edition 44 23-279
Wheel Loaders Bucket Selection 95 GC 95 GC Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 3.1 m3 3.57 m3 3.1 m3 Standard Linkage General Purpose Pin On 3.3 m3 3.4 m3 3.6 m3 3.8 m3 3.3 m3 3.91 m3 3.4 m3 4.14 m3 3.6 m3 Hook On 3.1 m3 3.57 m3 3.1 m3 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. 23-28 Edition 44
Bucket Selection 95H Wheel Loaders 95H Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) General Purpose 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) Standard Linkage Pin On 3.4 m3 (4.45 yd3) 3.2 m3 (4.19 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.68 m3 (4.81 yd3) 3.2 m3 (4.19 yd3) 23 Material Handling 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 2.7 m3 (3.53 yd3) 3.11 m3 (4.7 yd3) 2.7 m3 (3.53 yd3) General Purpose 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) High LIft Linkage Pin On 3.4 m3 (4.45 yd3) 3.2 m3 (4.19 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.68 m3 (4.81 yd3) 3.2 m3 (4.19 yd3) Material Handling 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) Material Density Bucket Fill Factors 115% 11% 15% 1% 95% lb/yd3 1,18 1,348 1,517 1,685 1,854 2,22 2,191 2,359 2,528 2,696 2,865 3,33 3,22 3,37 3,539 3,77 3,876 4,44 4,213 NOTE: All buckets are showing Bolt-On Edges. Edition 44 23-281
Wheel Loaders Bucket Selection 962H 962H Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 25 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) Standard Linkage Pin On 3.6 m3 (4.71 yd3) 3.4 m3 (4.45 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) Material Handling 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) 3.1 m3 (4.5 yd3) 3.57 m3 (4.67 yd3) 3.1 m3 (4.5 yd3) General Purpose 3.4 m3 (4.45 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) High LIft Linkage Pin On 3.6 m3 (4.71 yd3) 3.4 m3 (4.45 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) Material Handling 3.6 m3 (4.71 yd3) 4.14 m3 (5.41 yd3) 3.6 m3 (4.71 yd3) 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Material Density Bucket Fill Factors 115% 11% 15% 1% 95% lb/yd3 1,18 1,348 1,517 1,685 1,854 2,22 2,191 2,359 2,528 2,696 2,865 3,33 3,22 3,37 3,539 3,77 3,876 4,44 4,213 NOTE: All buckets are showing Bolt-On Edges. 23-282 Edition 44
Bucket Selection 966H Wheel Loaders 966H Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 3.8 m3 (4.97 yd3) 4.37 m3 (5.72 yd3) 3.8 m3 (4.97 yd3) Standard Linkage Pin On General Purpose Rock 4. m3 (5.23 yd3) 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 3.4 m3 (4.45 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 3.91 m3 (5.11 yd3) 3.4 m3 (4.45 yd3) 23 Material Handling/ Standard 4. m3 (5.23 yd3) 4.6 m3 (6.2 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Edition 44 23-283
Wheel Loaders Bucket Selection 972H 972H Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 General Purpose 4.2 m3 (5.49 yd3) 4.83 m3 (6.32 yd3) 4.2 m3 (5.49 yd3) 4.6 m3 (6.2 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) Standard Linkage Pin On Material Handling Rock 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 4.6 m3 (6.2 yd3) 4. m3 (5.23 yd3) Material Handling/ Standard 4.6 m3 (6.2 yd3) 5. m3 (6.54 yd3) 5.29 m3 (6.92 yd3) 4.6 m3 (6.2 yd3) 5.75 m3 (7.52 yd3) 5. m3 (6.54 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. 23-284 Edition 44
Bucket Selection 98H Wheel Loaders 98H Material Density kg/m3 7 8 9 1 11 12 13 14 15 16 17 18 19 2 21 22 23 24 5.4 m3 (5.7 yd3) 6.21 m3 (8.12 yd3) 5.4 m3 (5.7 yd3) General Purpose 5.7 m3 (7.46 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) Standard Linkage Pin On Material Handling Rock 6. m3 (7.85 yd3) 5.7 m3 (7.46 yd3) 4.4 m3 (5.75 yd3) 6.9 m3 (9.2 yd3) 6. m3 (7.85 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) 5.6 m3 (6.62 yd3) 4.4 m3 (5.75 yd3) 23 Coal 8.2 m3 (1.73 yd3) 9.43 m3 (12.33 yd3) 8.2 m3 (1.73 yd3) General Purpose/ Heavy Duty 5.7 m3 (7.46 yd3) 6.56 m3 (8.58 yd3) 5.7 m3 (7.46 yd3) Material Density lb/yd3 118 1348 1517 1685 1854 222 2191 2359 2528 2696 2865 333 322 337 3539 377 3876 444 Bucket Fill Factors 115% 11% 15% 1% 95% NOTE: All buckets are showing Bolt-On Edges. Edition 44 23-285
Wheel Loaders Bucket Selection 986H 986H Standard Lift Material Density Bucket Volume kg/m 3 tonnes/m 3 lb/yd 3 tons/yd 3 m 3 yd 3 1632-1795 1.63-1.8 275-325 1.38-1.51 6.1 8 174-1914 1.74-1.91 2933-3227 1.46-1.61 5.7 7.5 1865-251 1.86-2.5 3143-3457 1.57-1.73 5.4 7 *Density range covers 1% rated payload to 11% rated payload in accordance with Large Wheel Loader payload policy. 23-286 Edition 44
Bucket Selection 988K, 99H Wheel Loaders 988K Material Density Bucket Volume kg/m 3 tonnes/m 3 lb/yd 3 tons/yd 3 m 3 yd 3 1468-1614 1.47-1.61 25-275 1.25-1.38 7.7 1 1638-181 1.64-1.8 2778-356 1.39-1.53 6.9 9 1766-1942 1.77-1.94 31-33 1.5-1.65 6.4 8.33 99H Material Density Bucket Volume kg/m 3 tonnes/m 3 lb/yd 3 tons/yd 3 m 3 yd 3 159-1749 1.59-1.75 2692-2962 1.35-1.48 1 13 1728-191 1.73-1.9 2917-328 1.46-1.6 9.2 12 1849-234 1.85-2.3 3111-3422 1.56-1.71 8.6 11.25 23 Edition 44 23-287
Wheel Loaders Bucket Selection 992K 993K 992K Standard Bucket Volume Up to specified density for 1% fill factor Material Density m 3 yd 3 kg/m 3 lb/yd 3 12.2 16 178 3 11.5 15 189 32 1.7 14 23 343 992K High Lift Bucket Volume Up to specified density for 1% fill factor Material Density m 3 yd 3 kg/m 3 lb/yd 3 12.2 16 156 263 11.5 15 156 263 1.7 14 156 263 993K Standard Bucket Volume Up to specified density for 1% fill factor Material Density m 3 yd 3 kg/m 3 lb/yd 3 15.3 2 178 3 14.5 19 187 316 13.8 18 197 333 993K High Lift Bucket Volume Up to specified density for 1% fill factor Material Density m 3 yd 3 kg/m 3 lb/yd 3 14.5 19 172 289 13.8 18 181 36 13. 17 192 324 23-288 Edition 44
Bucket Selection 994H Wheel Loaders m 3 yd 3 994H Rated Payload 34 47 kg (76, lb) BUCKET CAPACITY 19 17 15 24.5 22.5 19.5 23 1.4 1.6 1.8 2. 2.2 2.4 2.6 kg/m 3 2.4 2.6 2.8 3. 3.2 3.4 3.6 3.8 4. 4.2 4.4 MATERIAL DENSITY (THOUSANDS) lb/yd 3 m 3 yd 3 994H High, Extended High Lifts Rated Payload 3 84 kg (68, lb) BUCKET CAPACITY 19 17 15 24.5 22.5 19.5 1.4 1.6 1.8 2. 2.2 2.4 2.6 kg/m 3 2.4 2.6 2.8 3. 3.2 3.4 3.6 3.8 4. 4.2 4.4 MATERIAL DENSITY (THOUSANDS) lb/yd 3 % = Bucket Fill Factor 11% 1% 95% Standard Edition 44 23-289
Wheel Loaders Bucket Selection IT14G2 BUCKET CAPACITY m 3 (yd 3 ) 3.3 (4.25) BUCKET SELECTION BASED ON MATERIAL DENSITY 3.1 (4.) 2.5 (3.25) 2. (2.6) 1.8 (2.4) 1.6 (2.) 1.4 (1.8) 1.3 (1.7) 1.2 (1.6) A 1. (1.31) 2 25 3 35 4 45 5 lb/yd 3 12 15 18 21 24 27 3 kg/m 3 MATERIAL DENSITY NOTE: Machines equipped same as those on Performance Data pages. KEY A IT14G2 23-29 Edition 44
Travel Time Loaded 93K 2.5R-25 Tires Wheel Loaders 93K TRAVEL TIME LOADED TIME (MIN) PERCENT GRADE 23 DISTANCE ONE WAY Meters Travel time assumes maximum governor pedal depression and automatic shifting in Range 4. In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Edition 44 23-291
Wheel Loaders Travel Time Empty 93K 2.5R-25 Tires 93K TRAVEL TIME EMPTY TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Travel time assumes maximum governor pedal depression and automatic shifting in Range 4. In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters 23-292 Edition 44
Travel Time Loaded 938K 2.5R-25 Tires Wheel Loaders 938K TRAVEL TIME LOADED TIME (MIN) PERCENT GRADE 23 DISTANCE ONE WAY Meters Travel time assumes maximum governor pedal depression and automatic shifting in Range 4. In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Edition 44 23-293
Wheel Loaders Travel Time Empty 938K 2.5R-25 Tires 938K TRAVEL TIME EMPTY TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters Travel time assumes maximum governor pedal depression and automatic shifting in Range 4. In load and carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. TIME (MIN) PERCENT GRADE DISTANCE ONE WAY Meters 23-294 Edition 44
Travel Time Loaded 95K 95H 23.5-R25 Tires Wheel Loaders 2.5 95K TRAVEL TIME LOADED 2% 2 TIME (MIN) 1.5 1 15% 1% 8% 6% 4% PERCENT GRADE 23.5 2% 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 3 95H TRAVEL TIME LOADED 2.5 2% TIME (MIN) 2 1.5 1 15% 1% 8% 6% 4% PERCENT GRADE.5 2% 5 1 15 2 25 DISTANCE ONE WAY Meters Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition 44 23-295
Wheel Loaders Travel Time Empty 95K 95H 23.5-R25 Tires 2 95K TRAVEL TIME EMPTY TIME (MIN) 1.5 1.5 2% 15% 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 DISTANCE ONE WAY Meters These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2 95H TRAVEL TIME EMPTY 2% 1.5 15% TIME (MIN) 1.5 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Meters Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. 23-296 Edition 44
Travel Time Loaded 962K 962H 23.5-R25 Tires Wheel Loaders 2.5 962K TRAVEL TIME LOADED 2% 2 TIME (MIN) 1.5 1 15% 1% 8% 6% 4% PERCENT GRADE 23.5 2% 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 3 962H TRAVEL TIME LOADED 2.5 2% TIME (MIN) 2 1.5 1 15% 1% 8% 6% 4% PERCENT GRADE.5 2% 5 1 15 2 25 Meters DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition 44 23-297
Wheel Loaders Travel Time Empty 962K 962H 23.5-R25 Tires 2 962K TRAVEL TIME EMPTY TIME (MIN) 1.5 1.5 2% 15% 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 DISTANCE ONE WAY Meters These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2 962H TRAVEL TIME EMPTY 2% TIME (MIN) 1.5 1.5 15% 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Meters Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. 23-298 Edition 44
Travel Time Loaded and Empty 966M 26.5-R25 Tires Wheel Loaders 2 966M TRAVEL TIME LOADED 1.5 2% TIME (MIN) 1.5 15% 1% 8% 6% 4% 2% PERCENT GRADE 23 1.5 5 1 15 2 25 DISTANCE ONE WAY 966M TRAVEL TIME EMPTY Meters 2% TIME (MIN) 1.5 15% 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 DISTANCE ONE WAY Meters These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition 44 23-299
Wheel Loaders Travel Time Loaded 966K 966H 26.5-R25 Tires 2.5 966K TRAVEL TIME LOADED 2% 2 15% TIME (MIN) 1.5 1 1% 8% 6% 4% PERCENT GRADE.5 2% 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2.5 966H TRAVEL TIME LOADED 2% 2 15% TIME (MIN) 1.5 1 1% 8% 6% 4% PERCENT GRADE.5 2% 5 1 15 2 25 Meters DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. 23-3 Edition 44
Travel Time Empty 966K 966H 26.5-R25 Tires Wheel Loaders 2 966K TRAVEL TIME EMPTY 2% 1.5 15% TIME (MIN) 1 1% 8% 6% PERCENT GRADE 23.5 4% 2% 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2 966H TRAVEL TIME EMPTY 2% 1.5 15% TIME (MIN) 1 1% 8% 6% PERCENT GRADE.5 4% 2% 5 1 15 2 25 DISTANCE ONE WAY Meters Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition 44 23-31
Wheel Loaders Travel Time Loaded and Empty 972M 26.5-R25 Tires 2 972M TRAVEL TIME LOADED TIME (MIN) 1.5 1.5 2% 15% 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 DISTANCE ONE WAY Meters 1.5 972M TRAVEL TIME EMPTY 2% TIME (MIN) 1.5 15% 8% 1% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 DISTANCE ONE WAY Meters 23-32 Edition 44 These machines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
Travel Time Loaded 972K 972H 26.5-R25 Tires Wheel Loaders 2.5 972K TRAVEL TIME LOADED 2% 2 15% TIME (MIN) 1.5 1 1% 8% 6% 4% PERCENT GRADE 23.5 2% 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2.5 972H TRAVEL TIME LOADED 2% 2 15% TIME (MIN) 1.5 1 1% 8% 6% 4% PERCENT GRADE.5 2% 5 1 15 2 25 Meters DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition 44 23-33
Wheel Loaders Travel Time Empty 972K 972H 26.5-R25 Tires 2 972K TRAVEL TIME EMPTY 2% 1.5 15% TIME (MIN) 1 1% 8% 6% PERCENT GRADE.5 4% 2% 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2 972H TRAVEL TIME EMPTY 2% 1.5 15% TIME (MIN) 1 1% 8% 6% PERCENT GRADE.5 4% 2% 5 1 15 2 25 DISTANCE ONE WAY Meters 23-34 Edition 44 Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations.
Travel Time Loaded 98K 98H 29.5-R25 Tires Wheel Loaders 2.5 98K (NO LOCK-UP) TRAVEL TIME LOADED 2% 2 15% TIME (MIN) 1.5 1 1% 8% 6% 4% PERCENT GRADE 23.5 2% 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2.5 98H TRAVEL TIME LOADED 2% 2 15% TIME (MIN) 1.5 1 1% 8% 6% 4% PERCENT GRADE.5 2% 5 1 15 2 25 DISTANCE ONE WAY Meters Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition 44 23-35
Wheel Loaders Travel Time Empty 98K 98H 29.5-R25 Tires 2 98K (NO LOCK-UP) TRAVEL TIME EMPTY 2% 1.5 15% TIME (MIN) 1.5 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 2 98H TRAVEL TIME EMPTY 2% 1.5 15% TIME (MIN) 1.5 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 Meters DISTANCE ONE WAY Not available in all regions. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. 23-36 Edition 44
Travel Time Lock-Up Clutch 98K 29.5-R25 Tires Wheel Loaders 2 98K (LOCK-UP CLUTCH) TRAVEL TIME LOADED 2% 1.5 15% TIME (MIN) 1.5 1% 8% 6% 4% 2% PERCENT GRADE 23 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. 1.5 98K (LOCK-UP CLUTCH) TRAVEL TIME EMPTY 2% TIME (MIN) 1.5 15% 1% 8% 6% 4% 2% PERCENT GRADE 5 1 15 2 25 Meters DISTANCE ONE WAY These machines meet U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards and are only available in North America and Europe. Contact your local Cat dealer for product availability. Curves assume use of highest operating speed attainable. In load-and-carry applications it is important to consult the tire manufacturer on load-speed ratings and pressure recommendations. Edition 44 23-37
Wheel Loaders 988K Rimpull-Speed-Gradeability Lock-Up Clutch kn 988K 35 1F 3 25 RIMPULL 2 2F 15 2F 1 5 3F 3F 4F 4F 5 1 15 2 25 3 35 4 km/h GROUND SPEED Direct Drive 23-38 Edition 44
Travel Time Loaded 988K Lock-Up Clutch 35/65-33 Tires Wheel Loaders Feet 7 6 Meters 22 2 18 988K TRAVEL TIME LOADED 2% 4% 6% 8% 1% 15% 2% DISTANCE 5 4 3 2 16 14 12 1 8 6 TOTAL RESISTANCE (Grade plus Rolling) 23 1 4 2.1.2.3.4.5.6.7.8.9 1 1.1 1.2 1.3 Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 4th gear for 2%-6% TR, 3rd gear for 8%-1% TR, 2nd gear for 15% and 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. Edition 44 23-39
Wheel Loaders Travel Time Empty 988K Lock-Up Clutch 35/65-33 Tires DISTANCE Feet 7 6 5 4 3 2 1 988K TRAVEL TIME EMPTY Meters 2% 4% 6% 8% 1% 15% 2% 22 2 18 16 14 12 1 8 6 4 2.1.2.3.4.5.6.7.8.9 1 1.1 1.2 1.3 Minutes TIME TOTAL RESISTANCE (Grade plus Rolling) NOTE: Curves assume use of highest operating speed attainable: 4th gear for 2%-8% TR, 3rd gear for 1%-15% TR, 2nd gear for 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. 23-31 Edition 44
99H Rimpull-Speed-Gradeability Wheel Loaders kg x 1 6 lb x 1 13 99H 55 12 E L 6 5 11 55 23 45 1 9 1 5 45 RIMPULL 4 35 3 25 2 8 7 6 5 4 2 3 4 35 3 25 2 TOTAL RESISTANCE (Grade plus Rolling) 15 3 2L 15 1 2 3L 1 5 1 5 2 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 mph 2 4 6 8 1 12 14 16 18 2 22 24 km/h SPEED KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty 76 965 kg (169,677 lb) L Loaded 91 934 kg (22,677 lb) Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions Edition 44 23-311
Wheel Loaders Travel Time Loaded 99H 41.25/7-39 Tires DISTANCE ONE WAY Feet 7 6 5 4 3 2 1 99H TRAVEL TIME LOADED Meters 2% 4% 6% 8% 1% 22 2 15% 18 16 14 12 2% 1 8 6 4 2.1.2.3.4.5.6.7.8.9 1 1.1 1.2 1.3 Minutes TIME TOTAL RESISTANCE (Grade plus Rolling) DISTANCE ONE WAY Feet 1 75 5 25 Meters 3 25 2 15 1 5 2% 4% 6% 8% 1%.5.1.15.2 15% 2% TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-8% TR, 2nd gear for 1%-2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. 23-312 Edition 44
Travel Time Empty 99H 41.25/7-39 Tires Wheel Loaders 99H TRAVEL TIME EMPTY Feet 7 Meters 22 2 2% 4% 6% 8% 1% 15% DISTANCE ONE WAY 6 5 4 3 2 18 16 14 12 1 8 6 2% TOTAL RESISTANCE (Grade plus Rolling) 23 1 4 2.1.2.3.4.5.6.7.8.9 1 1.1 1.2 1.3 Minutes TIME DISTANCE ONE WAY Feet 1 75 5 25 Meters 3 25 2 15 1 5 2% 4% 6% 8% 1% 15%.5.1.15.2 2% TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-1% TR, 2nd gear for 15% and 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. Edition 44 23-313
Wheel Loaders 992K Rimpull-Speed-Gradeability Standard Machine kg x 1 65 lb x 1 14 992K 6 6 E L 55 5 55 12 1 45 5 RIMPULL 45 4 35 3 25 1 8 6 2 4 35 3 25 2 TOTAL RESISTANCE % (Grade plus Rolling) 2 4 15 15 3 1 1 5 2 5 2 2 4 6 8 1 12 14 mph 2 4 6 8 1 12 14 16 18 2 22 24 SPEED km/h KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty 92 797 kg (24,58 lb) L Loaded 114 57 kg (252,58 lb) Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions 23-314 Edition 44
992K Rimpull-Speed-Gradeability Lock-Up Clutch Wheel Loaders lb 992K 23 RIMPULL TOTAL RESISTANCE % (Grade plus Rolling) SPEED mph KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty 92 797 kg (24,58 lb) L Loaded 114 57 kg (252,58 lb) Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions Edition 44 23-315
Wheel Loaders Travel Time Loaded 992K 45/65-45 Tires DISTANCE ONE WAY Feet 7 6 5 4 3 2 1 Meters 22 2 18 16 14 12 1 8 6 4 2 992K TRAVEL TIME LOADED 2% 4% 6% 8% 1%.1.2.3.4.5.6.7.8.9 1 1.1 1.2 1.3 TIME 15% 2% TOTAL RESISTANCE (Grade plus Rolling) Minutes DISTANCE ONE WAY Feet 1 75 5 25 Meters 3 25 2 15 1 5 2% 4% 6% 8% 1%.5.1.15.2 15% 2% TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-1% TR, 2nd gear for 15% and 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. 23-316 Edition 44
Travel Time Empty 992K 45/65-45 Tires Wheel Loaders 992K TRAVEL TIME EMPTY Feet 7 6 Meters 22 2 18 2% 4% 6% 8% 1% 15% 2% DISTANCE ONE WAY 5 4 3 2 16 14 12 1 8 6 TOTAL RESISTANCE (Grade plus Rolling) 23 1 4 2.1.2.3.4.5.6.7.8.9 1 1.1 1.2 1.3 Minutes TIME DISTANCE ONE WAY Feet 1 75 5 25 Meters 3 25 2 15 1 5 2% 4% 6% 8% 1% 15% 2%.5.1.15.2 TOTAL RESISTANCE (Grade plus Rolling) Minutes TIME NOTE: Curves assume use of highest operating speed attainable: 3rd gear for 2%-1% TR, 2nd gear for 15% and 2% TR. In load-and-carry applications it is important to consult the tire manufacturer on Ton-MPH ratings and pressure recommendations. Edition 44 23-317
Wheel Loaders 993K Rimpull-Speed-Gradeability Lock-Up Clutch kg x 1 E 993K L RIMPULL TOTAL RESISTANCE % (Grade plus Rolling) SPEED km/h KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty L Loaded Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions 23-318 Edition 44
993K Rimpull-Speed-Gradeability Lock-Up Clutch Wheel Loaders lb x 1 E 993K L RIMPULL TOTAL RESISTANCE % (Grade plus Rolling) 23 SPEED mph KEY 1 1st Gear 2 2nd Gear 3 3rd Gear KEY E Empty L Loaded Calculated Pull: Idle Hydraulics Curves Assume NO SLIP Conditions Edition 44 23-319