41-27 Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications. TECHNICAL DATA FEATURES & BENEFITS 10 year design life @ 25 C Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance. 3 Year Warranty (refer Dynasty warranty card, 41-26) Patented Long Life Alloy having the lowest calcium levels in the industry - minimizing grid growth, reducing gassing, and extending battery life. Patented UL Recognized Flamearresting vents in each cell for safety and long life. Designed with the same recombination, thermal runaway prevention, gassing and flame retardant characteristics of the Bellcore 4228 compliant Dynasty Telecom products. Flame retardant polypropylene case and cover compliant with UL 1778 Proprietary Fixed Orifice Plate Pasting technology applying active materials on both sides of the grid for consistent cell-to-cell performance, higher capacity and uniform grid protection. Thermally welded case-to-cover bond to eliminate leakage. Can be operated in any orientation. Upright, side or end mounting recommended. Not restricted for air transport - Complies with IATA/ICAO Special Provisions A67. Not restricted for surface transport - Classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189. Not restricted for water transport - Classified as non-hazardous material per IMDG Amendment 27. Watts Per Cell @ 77 F (25 C) Operating Time (in minutes) to Volts per Cell Weight Weight Model Voltage 5 10 15 20 30 50 60 lbs kg UPS12-100MR 12 172 117 75 57 39 24 21 10 12 288 192 148 120 89 71 65 60 51 36 27.3 12.4 12 376 257 206 170 125 101 92 85 73 52 18 UPS12-300MR 12 550 382 300 244 179 144 131 121 105 76 58.4 26.5 UPS12-0MR 12 620 4 0 2 217 171 155 141 122 87 67.4 30.5 UPS12-0MR 12 720 505 0 325 237 189 172 158 136 98 75.8 34.4 UPS12-4MR 12 773 5 488 412 317 256 236 218 189 136 100 UPS12-5MR 12 868 654 537 0 344 277 252 230 198 139 100 UPS6-620MR 6 9 750 620 525 410 333 309 285 2 173 72 33
SPECIFICATIONS Operating Temperature Range with temperature compensation Nominal Operating Temperature Range Recommended Maximum Charging Current Limit Float Charging Voltage Maximum AC Ripple (Charger) Self Discharge Equalize charge and cycle service voltage Terminal: Flag Terminal: Inserted Terminal Hardware Annual Retorque Terminal Hardware Initial Torque: Inserted Terminal Discharge: - F (- C) to +160 F (71 C) Charge: -10 F (-23 C) to +1 F (60 C) +74 F (-23 C) to +80 F (27 C) C/5 amperes @ 20hr rate 13.65 ± 1.5 VDC average per 12V unit (6.75 to 6. per 6V unit) 0.5% RMS or 1.5% P-P of float charge voltage recommended for best results. Up to 6 months at 25 C and then a freshening charge is required. For higher temps, the time interval will increase. freshening charge is required. For higher temperatures the time interval will be shorter. For lower temperatures time interval will decrease equalization charge. 14. to 14.80 VDC average per 12V unit @ 77 F (25 C) (7.20 to 7. VDC per 6V unit.) 0.22 in. clearance hole to accept 0.1875 in. bolt (UPS12-100MR) Threaded copper alloy insert terminal to accept 10-32 UNF bolt (, ) 1 4-20 UNC bolt (UPS12-300MR, UPS12-0MR, UPS12-0MR, UPS12-4MR, UPS12-5MR, UPS6-620MR) 32 in.-lbs (3.48 N-m)(UPS12-100MR) in.-lbs. (4.5 N-m)(UPS12-100MR) 30 in.-lbs. (3.4 N-m) (, ) 110 in.-lbs. (12.4 N-m) (UPS12-300MR, UPS12-0MR, UPS12-0MR, UPS12-4MR, UPS12-5MR, UPS6-620MR) DIMENSIONS Battery Termination UPS12-100MR UPS 12-300MR A C E F 0.25 6.42 0.5 0 1 2.7 0 0.2 5.5 2 6 0.6 6 1 6.6 #10-32 UNF 7 0.6 1 7.1 #10-32 UNF 1.3 3 3 3.7 B D 1.3 3 3 3.8 8 0.64 0.18 16.18 4.67 0.50 12.62 0.75 19.0 0.1 9 4.7 9 0.87 22.2 0.1 4.7 0.98 24.9 3.2 A B C D E F UPS12-0MR UPS12-0MR UPS12-4MR/UPS12-5MR UPS6-620MR UPS12-100MR 6.54 6. 5.17 5.07 6.37 6.86 (166.2) (163.7) (131.3) (128.8) (161.7) (174.3) 7.76 7.54 5.19 5.02 6.52 6.80 (197.1) (1.4) (131.9) (127.6) (165.7) (172.7) 9.0 8.86 5.48 5.31 7.89 8.07 (228.6) (225.1) (139.2) (134.8) (200.3) (205.1) UPS12-300MR 10.27 10.17 6.83 6.65 7.89 8.01 (260.9) (258.4) (173.4) (.9) (200.3) (203.5) 1.3 3 3 3.6 8 1.3 1 3 3.3 2 1.3 1 3 3.3 2 1.7 3 4 4.0 4 0.50 12.62 12.04 11.95 6.83 6.65 7.94 8.06 1.13 1.22 1.22 UPS12-0MR (305.8) (303.5) (173.4) (.9) (201.6) (204.8) 28.70 31.10 31.10 13.42 12.75 6.80 6.54 8. 8.52 UPS12-0MR (3.9) (323.7) (172.7) (166.0) (213.2) (216.4) UPS12-4MR 13.57 12.74 6.80 6.63 10.81 10.93 UPS12-5MR (344.7) (323.6) (172.7) (.4) (274.5) (277.7) 12.63 12.51 6.97 6.83 8.82 8.94 UPS6-620MR (320.8) (317.8) (177.0) (173.4) (224.0) (227.2) *All dimensions in millimeters. All dimensions are for reference only. Contact a C&D Representative for complete dimension information.
UPS12-100MR Volts/Cell 5 158 172 174 179 10 111 115 117 119 Operating Time to Voltage (in minutes) 15 87 92 20 73 75 75 76 76 30 56 57 57 57 58 46 42 50 39 60 34 24 24 24 25 25 Operating Time to Voltage (in hours) Volts/Cell.083.25.50.75 1 2 100 1. 51.1 33.0 22.4 18.2 14.0 6.30 6.05 3.94 2.62 2.14 1.82 1.14 0.96 0.34 0.24 62.8 38.4 25.3 20.5 15.6 9.10 6.60 4.29 2.85 2.33 1.98 1.24 1.05 0.37 0.26 72.3 42.1 27.1 21.8 16.4 9.50 6.86 4. 2.95 2.41 2.05 1.28 1.08 0.38 0.27 80.0 44.3 28.1 22.5 16.9 9.75 7.00 4.53 3.00 2. 2.08 1.30 1.10 0.39 0.28 DIECUT Operating Time to Voltage (in minutes) Volts/Cell 5 10 15 20 30 50 60 270 282 288 292 296 182 188 192 196 200 141 144 148 150 152 115 120 122 86 87 89 69.0 70.0 71.1 71.8 72.5 63.0 63.9 64.9 65.3 66.0 58.0 58.8 59.5 60.0 60.5 49.7 50.4 51.0 51.5 51.8.0.5 36.0 36.3 36.5 22.5 12.5 23.8 13.1 25.2 13.7 Operating Time to Voltage (in hours) 8.80 5.68 3.76 3.10 2.63 1.39 0. 9.20 5. 3. 3.21 2.72 1.69 1.42 0.48 9.52 6.05 4.00 3.29 2.78 1.73 1. 0.49 Operating Time to Voltage (in minutes) Volts/Cell 5 10 15 20 30 50 60 3 366 376 380 392 2 252 257 259 261 195 201 206 207 209 164 170 171 172 121 125 126 127 98 99 101 101 102 92 93 93 83.0 84.2 85.0 85.4 86.0 71.8 72.8 73.3 73.8 74.2 51.0 52.0 52.4 52.6 52.8 33.0 18.7.0 19.5 36.5 20.6 Constant Power Discharge Ratings - Amperes @ 77 F (25 C) Operating Time to Voltage (in hours) 13.3 8.60 5.78 4.74 4.02 2.50 2.10 0.73 13.9 9.20 6.10 5.02 4.25 2.63 2.21 0.76 14.5 9. 6.23 5.09 4.30 2.67 2.24 0.77
UPS12-300MR Volts/Cell 5 496 530 550 566 580 10 360 373 382 387 3 Operating Time to Voltage (in minutes) 15 282 294 300 303 306 20 234 2 244 246 248 30 174 177 179 181 183 1 142 144 146 1 128 130 131 133 134 50 120 121 122 60 103 104 105 106 107 74 75 76 77 78 48.4 50.7 52.5 27.1 28.3 29.0 Operating Time to Voltage (in hours) 19.6 12.6 8.34 6.85 5.80 3.60 3.03 1.05 20.3 13.1 8.81 7.27 6.15 3.80 3.18 1.08 20.6 13.4 9.13 7.50 6. 3.89 3.25 1.10 UPS12-0MR Operating Time to Voltage (in minutes) Volts/Cell 5 10 15 20 30 50 60 5 596 620 6 672 410 425 4 5 0 327 337 0 360 370 274 283 2 298 303 205 211 217 219 222 164 167 171 173 175 149 152 155 157 159 137 1 141 144 1 120 122 125 85 86 87 88 89 53.0 31.0 59.0 33.5 63.0.1 Operating Time to Voltage (in hours) 22.1 14.8 10.08 8.34 7.08 4. 3.71 1.29 23.7 15.6 10.63 8.74 7.42 4.55 3.83 1.32 24.8 16.1 11.00 9.00 7.58 4.65 3. 1.34 UPS12-0MR Operating Time to Voltage (in minutes) Volts/Cell 5 10 15 20 30 50 60 616 680 720 7 770 461 4 505 515 525 377 3 0 6 412 312 319 325 329 333 230 234 237 239 241 184 187 189 1 193 170 172 174 175 154 156 158 160 161 133 1 136 137 138 96 97 98 99 100 56.0 33.0 62.0.3 68.0 38.0 Operating Time to Voltage (in hours) 23.9 15.8 10.8 8. 7.58 4.77 4.00 1.38 25.3 16.6 11.4 9.44 8.02 4.99 4.18 1. 27.0 17.6 11.9 9.80 8.30 5.10 4.27 1.46
UPS12-4MR Volts/Cell 5 660 7 773 800 8 10 525 570 5 614 644 Operating Time to Voltage (in minutes) 15 444 2 488 500 513 20 385 1 412 418 428 30 300 310 317 322 327 2 252 256 260 264 224 231 236 238 241 50 208 214 218 220 222 60 183 186 189 1 192 133 1 136 137 138 80.9.2 85.5 50.9.3 53.2 Operating Time to Voltage (in hours) 34.4 22.5 15.0 12.3 10.5 6.58 5.53 1.93 36.3 23.5 15.5 12.8 10.9 6.79 5.70 1.99 37.8 24.2 16.1 13.2 11.2 6.96 5.84 2.03 UPS12-5MR Operating Time to Voltage (in minutes) Volts/Cell 5 10 15 20 30 50 60 723 825 868 4 952 564 625 654 679 696 2 512 537 554 564 5 2 0 9 465 320 334 344 0 4 261 270 277 282 284 239 2 252 256 258 220 226 230 234 237 1 193 198 200 202 136 137.5 139 141 1 1. 75.0 44.0 85.0 49.5.0 53.0 95.0 56.0 Operating Time to Voltage (in hours) 32.0 21.4 14.4 11.9 10.1 6. 5..8 23.4 15.8 13.0 11.1 6.94 5.88 2.00 38.0 24.6 16.4 13.6 11.5 7.20 6.06 2.07 39.9 25.6 16.9 13.9 11.8 7. 6.17 2.11 UPS6-620MR Operating Time to Voltage (in minutes) Volts/Cell 5 10 15 20 30 50 60 8 8 9 950 1000 680 720 750 760 7 575 600 620 630 650 500 520 525 532 550 395 5 410 414 420 320 332 333 3 3 297 306 309 311 315 275 280 285 288 2 242 2 2 248 250 170 173 176 178 Operating Time to Voltage (in hours) Volts/Cell.083.25.50.75 1 2 100 1. 250 207 149 122 94.0 57.7 42.0 27.9 19.0 15.8 13.5 8.70 7.31 2.51 1.82 332 248 174 142 110 62.7.5 30.0 20.3 16.9 14.5 9.30 7.84 2.73 1.98 418 288 196 158 120 68.0 48.3 31.6 21.3 17.6 15.2 9.80 8.21 2.83 2.05 4 312 208 166 69.5 50.0 32.4 22.0 18.2 15.6 10.0 8.38 2.87 2.08
High Rate Max Part Number Manufacturer Approved Premium Replacement for: UPS12-100MR UPS12-300MR UPS12-0MR UPS12-0MR UPS12-4MR UPS12-5MR UPS6-620MR UPS12-100FR UPS12-1FR & MR12-150 UPS12-170FR, UPS12-200FR & MR12-210 UPS12-270FR & MR12-300 UPS12-310FR & MR12-0 UPS12-370FR & MR12-0 UPS12-5FR & MR12-4 UPS12-530FR & MR12-5 UPS6-620FR 10 Union Meeting Road P.O. Box 3053 Blue Bell, PA19422-0858 (215) 619-2700 Fax (215) 619-7899 (800) 5-8630 customersvc@cdtechno.com www.cdtechno.com Any data, descriptions or specifications presented here in are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user s intended purpose and in user s specific application. Copyright 2008 C&D TECHNOLOGIES, INC. Printed in U.S.A. 41-27 5M/0108/TN